| 3916935 | 151122 | None | code01 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 Nmm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. ---- as per kw2 | Sqm | 1231.0 | 1231.0 | 46.13 | False | None | None | False | None | False | 56786.03 | 0 |
| 3916936 | 151122 | None | code02 | Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brickstone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge ---- as per kw2 | Sqm | 354.0 | 354.0 | 170.6 | False | None | None | False | None | False | 60392.4 | 0 |
| 3916937 | 151122 | None | code03 | Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge ---- as per kw2 | Sqm | 211.0 | 211.0 | 150.42 | False | None | None | False | None | False | 31738.62 | 0 |
| 3916938 | 151122 | None | code04 | Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- as per kw2 | Sqm | 241.0 | 241.0 | 456.79 | False | None | None | False | None | False | 110086.39 | 0 |
| 3916939 | 151122 | None | code05 | Providing White washing with lime to give an even shade :New work (three coats) with lime of approved quality, including cost of materials, labour complete as per specifications and as per directions of Engineerin- charge. ---- as per kw2 | Sqm | 26.0 | 26.0 | 777.8 | False | None | None | False | None | False | 20222.8 | 0 |
| 3916940 | 151122 | None | code06 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- as per kw2 | Sqm | 137.0 | 137.0 | 321.01 | False | None | None | False | None | False | 43978.37 | 0 |
| 3916941 | 151122 | None | code07 | Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 L/10 m²) over and including priming coat of exterior primer applied 2.20kg10 m² to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- as per kw2 | Sqm | 283.0 | 283.0 | 456.79 | False | None | None | False | None | False | 129271.57 | 0 |
| 3916942 | 151122 | None | code08 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately). Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates ---- as per kw2 | Cum | 5989.0 | 5989.0 | 10.68 | False | None | None | False | None | False | 63962.52 | 0 |
| 3916943 | 151122 | None | code09 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm ---- as per kw2 | Sqm | 1238.0 | 1238.0 | 89.35 | False | None | None | False | None | False | 110615.3 | 0 |
| 3916944 | 151122 | None | code10 | Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. ---- as per kw2 | Sqm | 1449.0 | 1449.0 | 43.76 | False | None | None | False | None | False | 63408.24 | 0 |
| 3916945 | 151122 | None | code11 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg m2 including pointing the joints with white cement and matching pigments etc., complete. ---- as per kw2 | Sqm | 889.0 | 889.0 | 13.28 | False | None | None | False | None | False | 11805.92 | 0 |
| 3916946 | 151122 | None | code12 | Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6 kg/m2 to achieve final DFT (Dry Film Thickness) of 1mm including prime coat of epoxy primer @150 g/m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification. ---- as per kw2 | Sqm | 817.0 | 817.0 | 142.77 | False | None | None | False | None | False | 116643.09 | 0 |
| 3916947 | 151122 | None | code13 | Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer including cost of materials ,labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ---- as per kw2 | Sqm | 8276.0 | 8276.0 | 2.52 | False | None | None | False | None | False | 20855.52 | 0 |
| 3916948 | 151122 | None | code14 | Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. ---- as per kw2 | Cum | 138074.0 | 138074.0 | 1.31 | False | None | None | False | None | False | 180876.94 | 0 |
| 3916949 | 151122 | None | code15 | Providing and fixing in position fully panelled Honne wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. ( excluding cost of fixtures ) ---- as per kw2 | Sqm | 7444.0 | 7444.0 | 10.08 | False | None | None | False | None | False | 75035.52 | 0 |
| 3916950 | 151122 | None | code16 | Providing and fixing in position Honnewood fully panelled shutters for windows with stiles and rails of 35mm. thick, 75mm wide in two halves with panels of 25mm thick including cost of materials, labour charges, usage charges complete as per specifications. (excluding cost of fixtures) ---- as per kw2 | Sqm | 7574.0 | 7574.0 | 16.2 | False | None | None | False | None | False | 122698.8 | 0 |
| 3916951 | 151122 | None | code17 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding ---- as per kw2 | Kgs | 168.0 | 168.0 | 259.2 | False | None | None | False | None | False | 43545.6 | 0 |
| 3916952 | 151122 | None | code18 | Providing and fixing angle iron frames for doors, windows andNventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge including cost of materials, labour, usage charges of machinery complete as per specifications ---- as per kw2 | Kgs | 115.0 | 115.0 | 32.4 | False | None | None | False | None | False | 3726.0 | 0 |
| 3916953 | 151122 | None | code19 | Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long brackets of 15x15mm M.S Square tube, the entire door frame to be reinforced with 19x19mm M.S Square tube of 19 gauge. The door frame to be fixed to the wall using M.S. Screws of 65/80mm size complete as per manufacturers specification & direction of Engineer-in-charge. ---- as per kw2 | m | 318.0 | 318.0 | 15.3 | False | None | None | False | None | False | 4865.4 | 0 |
| 3916954 | 151122 | None | code20 | Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification. ---- as per kw2 | Sqm | 4960.0 | 4960.0 | 4.05 | False | None | None | False | None | False | 20088.0 | 0 |
| 3916955 | 151122 | None | code21 | Painting Wood work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @ 0.80 L/10 m² of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- as per kw2 | Sqm | 138.0 | 138.0 | 26.28 | False | None | None | False | None | False | 3626.64 | 0 |
| 3916956 | 151122 | None | code22 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied0.80 L/10 m² of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.PVC pipes 90mm dia., 6 kg/sqcm & class 3 ---- as per kw2 | Sqm | 139.0 | 139.0 | 17.32 | False | None | None | False | None | False | 2407.48 | 0 |
| 3916957 | 151122 | None | code23 | PVC pipes 160mm dia., 6 kg/sqcm & class. ---- as per kw2 | m | 174.0 | 174.0 | 12.0 | False | None | None | False | None | False | 2088.0 | 0 |
| 3916958 | 151122 | None | code24 | PVC pipes 63mm dia., 6 kg/sqcm & class. ---- as per kw2 | m | 618.0 | 618.0 | 30.0 | False | None | None | False | None | False | 18540.0 | 0 |
| 3916959 | 151122 | None | code25 | PVC pipes 63mm dia., 6 kg/sqcm & class. ---- as per kw2 | m | 161.0 | 161.0 | 30.0 | False | None | None | False | None | False | 4830.0 | 0 |
| 3916960 | 151122 | None | code26 | Supply and delivery at site special moulded variety PVC bend as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments. ---- as per kw2 | Each | 390.0 | 390.0 | 8.0 | False | None | None | False | None | False | 3120.0 | 0 |
| 3916961 | 151122 | None | code27 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid ---- as per kw2 | Each | 4838.0 | 4838.0 | 1.0 | False | None | None | False | None | False | 4838.0 | 0 |
| 3916962 | 151122 | None | code28 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests ---- as per kw2 | Each | 4884.0 | 4884.0 | 2.0 | False | None | None | False | None | False | 9768.0 | 0 |
| 3916963 | 151122 | None | code29 | Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required : Single half stall urinal with 5 litre P.V.C. automatic flushing cistern ---- as per kw2 | Each | 8642.0 | 8642.0 | 2.0 | False | None | None | False | None | False | 17284.0 | 0 |
| 3916964 | 151122 | None | code30 | White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps ---- as per kw2 | Each | 3082.0 | 3082.0 | 6.0 | False | None | None | False | None | False | 18492.0 | 0 |
| 3916965 | 151122 | None | code31 | Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendments. 1x3x1.5 SqmCentrifugal Pump 1.00HP ---- as per kw2 | Each | 65.0 | 65.0 | 30.0 | False | None | None | False | None | False | 1950.0 | 0 |
| 3916966 | 151122 | None | code32 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall. 20 mm nominal dia Pipes15.mm ---- as per kw2 | m | 182.0 | 182.0 | 30.0 | False | None | None | False | None | False | 5460.0 | 0 |
| 3916967 | 151122 | None | code33 | 20 mm ---- as per kw2 | m | 242.0 | 242.0 | 60.0 | False | None | None | False | None | False | 14520.0 | 0 |
| 3916968 | 151122 | None | code34 | 25mm ---- as per kw2 | m | 318.0 | 318.0 | 30.0 | False | None | None | False | None | False | 9540.0 | 0 |
| 3916969 | 151122 | None | code35 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.h. ---- as per kw2 | l | 9.0 | 9.0 | 1000.0 | False | None | None | False | None | False | 9000.0 | 0 |
| 3916970 | 151122 | None | code36 | Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work ---- as per kw2 | Cum | 95.0 | 95.0 | 36.19 | False | None | None | False | None | False | 3438.05 | 0 |
| 3916971 | 151122 | None | code37 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately). Mix 1:4:8( M5) Using 40 mm nominal size graded crushed coarse aggregates ---- as per kw2 | Cum | 5664.0 | 5664.0 | 6.61 | False | None | None | False | None | False | 37439.04 | 0 |
| 3916972 | 151122 | None | code38 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately). Mix 1:2:4 Using 20 mm nominal size graded crushed coarse aggregates ---- as per kw2 | Cum | 6217.0 | 6217.0 | 3.89 | False | None | None | False | None | False | 24184.13 | 0 |
| 3916973 | 151122 | None | code39 | Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work ---- as per kw2 | Cum | 8220.0 | 8220.0 | 9.29 | False | None | None | False | None | False | 76363.8 | 0 |
| 3916974 | 151122 | None | code40 | Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregatesBasic Rate 6323.00 + Formwork 50 ---- as per kw2 | Cum | 9484.5 | 9484.5 | 1.66 | False | None | None | False | None | False | 15744.27 | 0 |
| 3916975 | 151122 | None | code41 | Basic Rate 6323.00 + Formwork 50 ---- as per kw2 | Cum | 9484.5 | 9484.5 | 1.4 | False | None | None | False | None | False | 13278.3 | 0 |
| 3916976 | 151122 | None | code42 | Basic Rate 6323.00 + Formwork 70 ---- as per kw2 | Cum | 10749.1 | 10749.1 | 0.15 | False | None | None | False | None | False | 1612.365 | 0 |
| 3916977 | 151122 | None | code43 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.Basic Rate 6630.00 + Form Work 75 ---- as per kw2 | Cum | 11271.0 | 11271.0 | 0.21 | False | None | None | False | None | False | 2366.91 | 0 |
| 3916978 | 151122 | None | code44 | Basic Rate 6630.00 + Form Work 50 ---- as per kw2 | Cum | 9945.0 | 9945.0 | 2.75 | False | None | None | False | None | False | 27348.75 | 0 |
| 3916979 | 151122 | None | code45 | Basic Rate 6630.00 + Form Work 60 ---- as per kw2 | Cum | 10608.0 | 10608.0 | 0.57 | False | None | None | False | None | False | 6046.56 | 0 |
| 3916980 | 151122 | None | code46 | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. ---- as per kw2 | Kgs | 89457.0 | 89457.0 | 0.55 | False | None | None | False | None | False | 49201.35 | 0 |
| 3916981 | 151122 | None | code47 | Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. M.S. tube including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ---- as per kw2 | Cum | 138.0 | 138.0 | 132.48 | False | None | None | False | None | False | 18282.24 | 0 |
| 3916982 | 151122 | None | code48 | Providing and fixing MS inspection door of size 60 cms x 60 cms, including MS frame made of 50x50x6mm angle, shutters made of 3mm thick MS sheets, with hinges, locking arrangements at top etc. including painting with anticorrosive approved paint etc. complete including all lead and lifts etc. ---- as per kw2 | Each | 2140.0 | 2140.0 | 2.0 | False | None | None | False | None | False | 4280.0 | 0 |
| 3916983 | 151122 | None | code49 | Providing & fixing upvc ventilator with Exhaust Turbo speed fanwith 5 blades (300mm x 300 mm & above sized fan) with copper motor having mounting arrangements as per direction of Engineer in charge of work ---- as per kw2 | Each | 1950.0 | 1950.0 | 2.0 | False | None | None | False | None | False | 3900.0 | 0 |
| 3916984 | 151122 | None | code50 | Providing & fixing of Tea table 900mm x 750mm 450mm with 12mm thick ethched tempered glass with bevelled drawing made out of BWP ply and out faces laminated with 4mm thick veneer or 1mm thick laminate ---- as per kw2 | Cum | 7500.0 | 7500.0 | 6.0 | False | None | None | False | None | False | 45000.0 | 0 |
| 3916985 | 151122 | None | code51 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 453x357 mm ---- as per kw2 | Each | 1018.0 | 1018.0 | 3.0 | False | None | None | False | None | False | 3054.0 | 0 |
| 3916986 | 151122 | None | code52 | 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 g ---- as per kw2 | Each | 478.0 | 478.0 | 3.0 | False | None | None | False | None | False | 1434.0 | 0 |