| 3925675 | 151397 | None | code01 | PART-A SUPER STRUCTURE
Demolishing cement concrete manually/ by mechanical means including disposal of material to the appropriate disposal area as per direction of Engineer-in-charge. SR 2023-24 V-2 I-19.2.1 VP-187 | Cum | 1746.15 | 1746.15 | 20.0 | False | None | None | False | None | False | 34923.0 | 0 |
| 3925676 | 151397 | None | code02 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge. SR2023-24 V-2 I-19.7.1 VP-187 | Cum | 506.1 | 506.1 | 15.0 | False | None | None | False | None | False | 7591.5 | 0 |
| 3925677 | 151397 | None | code03 | Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates SR2023-24 V-1 I-2.2.3 VP-15 For slab | Cum | 10112.25 | 10112.25 | 115.0 | False | None | None | False | None | False | 1162908.75 | 0 |
| 3925678 | 151397 | None | code04 | Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates SR2023-24 V-1 I-2.2.3 VP-15 For Beam | Cum | 10777.53 | 10777.53 | 70.0 | False | None | None | False | None | False | 754427.1 | 0 |
| 3925679 | 151397 | None | code05 | Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates SR2023-24 V-1 I-2.2.3 VP-15 For Column | Cum | 11442.81 | 11442.81 | 80.0 | False | None | None | False | None | False | 915424.8 | 0 |
| 3925680 | 151397 | None | code06 | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification.(SR 2023-24 I-2.11h VP -18 Vol-I) | Tonne | 84620.78 | 84620.78 | 23.0 | False | None | None | False | None | False | 1946277.94 | 0 |
| 3925681 | 151397 | None | code07 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications (I-6.32 VP-17)SR 2023-24Vol-1 | Sqm | 1403.01 | 1403.01 | 535.0 | False | None | None | False | None | False | 750610.35 | 0 |
| 3925682 | 151397 | None | code08 | Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.( SR 2023-24 Vol-II, I-8.3.1 VP-41) | Sqm | 379.13 | 379.13 | 1500.0 | False | None | None | False | None | False | 568695.0 | 0 |
| 3925683 | 151397 | None | code09 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately) :For Fixed Portion : Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) including cost of materials, labour, usage charges of machinery complete as per specifications. (SR 2023-24 V-2 VP-87 I-11.35.1.1) | Kgs | 484.09 | 484.09 | 1700.0 | False | None | None | False | None | False | 822953.0 | 0 |
| 3925684 | 151397 | None | code10 | Providing Honne wood frames of doors, windows, clerestory windows,ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps),but including cost of materials, labour, usage charges complete as per specifications SR 2023-24 VOl-2 I- 12.11 VP-99 | Cum | 147877.25 | 147877.25 | 2.0 | False | None | None | False | None | False | 295754.5 | 0 |
| 3925685 | 151397 | None | code11 | Providing and fixing plywood 4 mm thick, one side decorative veneer conforming to IS: 1328 (type-1), for plain lining / cladding with necessary screws, including priming coat on unexposed surface with Decorative veneer facings of approved manufacture SR 2023-24 I- 10.11 VP-70 Vol-2 | Sqm | 1585.08 | 1585.08 | 100.0 | False | None | None | False | None | False | 158508.0 | 0 |
| 3925686 | 151397 | None | code12 | Providing and fixing double action hydraulic floor spring of approved brand manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors,embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge: With brass cover plate minimum 1.25 mm thickness including cost of materials, labour, usage charges of machinery complete as per specifications SR 2023-24 Vol-2 I- 11.38.2 | Each | 3003.08 | 3003.08 | 4.0 | False | None | None | False | None | False | 12012.32 | 0 |
| 3925687 | 151397 | None | code13 | Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc. to be paid separately) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge SR 2023-24 Vol-2 I- 11.52 VP-94 | Sqm | 5057.26 | 5057.26 | 4.12 | False | None | None | False | None | False | 20835.9112 | 0 |
| 3925688 | 151397 | None | code14 | Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. SR 2023-24 I-12.60 VP-105 | Each | 1126.69 | 1126.69 | 4.0 | False | None | None | False | None | False | 4506.76 | 0 |
| 3925689 | 151397 | None | code15 | Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete SR 2023-24 I-12.62 VP-105 | Each | 253.82 | 253.82 | 8.0 | False | None | None | False | None | False | 2030.56 | 0 |
| 3925690 | 151397 | None | code16 | Fully Perforated Gypsum Plaster Board of size 1200 x 2400x12.5 mm having approx. 15 % perforated area with perforation size and pattern as approved by the Engineer- in-charge and as per manufacturer's specification, with all 4 side tapered and backed by acoustical tissue withNRC value not less than 0.60 SR 2023-24 Vol-2 I-7.32.4 VP-25 | Sqm | 1414.79 | 1414.79 | 60.0 | False | None | None | False | None | False | 84887.4 | 0 |
| 3925691 | 151397 | None | code17 | Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware & Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&Ps shall not be made)SR 2023-24 Vol-2 I- 12.90 VP-110 | Sqm | 7212.11 | 7212.11 | 42.75 | False | None | None | False | None | False | 308317.7025 | 0 |
| 3925692 | 151397 | None | code18 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm (SR 2023-24 V-2 VP-60 I-9.12.2) | Sqm | 1226.29 | 1226.29 | 486.4 | False | None | None | False | None | False | 596467.456 | 0 |
| 3925693 | 151397 | None | code19 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. ** Polished Granite stone slab Black, Cherry Red, Brown, Cat Eye, River Pink or equivalent.
(SR 2023-24 VP 63 I-9.24 Vol-2) | Sqm | 3054.49 | 3054.49 | 220.0 | False | None | None | False | None | False | 671987.8 | 0 |
| 3925694 | 151397 | None | code20 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/m2 including pointing the joints with white cement and matching pigment etc., complete. (SR 2023-24 V-2 VP-60 I-9.9) | Sqm | 1152.39 | 1152.39 | 285.0 | False | None | None | False | None | False | 328431.15 | 0 |
| 3925695 | 151397 | None | code21 | Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. G.I. pipes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. (SR 2023-24 VP 84 I-11.26.3 Vol-2 ) | Kgs | 195.99 | 195.99 | 210.0 | False | None | None | False | None | False | 41157.9 | 0 |
| 3925696 | 151397 | None | code22 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.(SR 2023-24 VP 136 I-14.31 Vol-2 ) | Each | 1306.62 | 1306.62 | 8.0 | False | None | None | False | None | False | 10452.96 | 0 |
| 3925697 | 151397 | None | code23 | Providing and fixing CPVC pipes confirming to IS 15778 having themselves stability for hot and cold water supply including all CPVC plain and brass treated fittings including fixing the pipe with clamps at 1 mtr spacing. This includes jointing of pipes and fittings with one set of CPVC solvant cement and testing of joints complete. ( SR 2023-24 VP-122 I-13.31.6 Vol-2) (External work) for 50mm dia | m | 836.45 | 836.45 | 120.0 | False | None | None | False | None | False | 100374.0 | 0 |
| 3925698 | 151397 | None | code24 | Providing and fixing CPVC pipes confirming to IS 15778 having themselves stability for hot and cold water supply including all CPVC plain and brass treated fittings including fixing the pipe with clamps at 1 mtr spacing. This includes jointing of pipes and fittings with one set of CPVC solvant cement and testing of joints complete. ( SR 2023-24 VP I-13.31.5 Vol-2) (External work) for 40mm dia | Rmtr | 574.05 | 574.05 | 99.0 | False | None | None | False | None | False | 56830.95 | 0 |
| 3925699 | 151397 | None | code25 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. (SR 2023-24 VP 123 I-13.34 Vol-2 ) | l | 9.63 | 9.63 | 5000.0 | False | None | None | False | None | False | 48150.0 | 0 |
| 3925700 | 151397 | None | code26 | Supply and delivery at site of brand new best make gate valve as per IS 778/1984 with ISI Mark and as per its latest amendments 50 mm SR 2023-24 V-5 VP-162 I-13.25.1 | Each | 1338.75 | 1338.75 | 6.0 | False | None | None | False | None | False | 8032.5 | 0 |
| 3925701 | 151397 | None | code27 | Providing of Gunmetal Ball Valve of Non rising stem, screwed in bonnet, inside screw, integral seats, screwed female ends to IS:554/ BS 21/ ISO 7, Unbreakable sheet metal Handwheel, confoming to IS:778 Class-1 including provision of re-packing under pressure with appurtenances, complete : 150 mm nominal bore etc. complete SR 2023-24 V-5 VP-35 I-2.6 | Each | 225.98 | 225.98 | 6.0 | False | None | None | False | None | False | 1355.88 | 0 |
| 3925702 | 151397 | None | code28 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required: using White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer (SR 2023-24 VP 132 I-14.7.3 Vol-2 ) | Nos | 3069.48 | 3069.48 | 6.0 | False | None | None | False | None | False | 18416.88 | 0 |
| 3925703 | 151397 | None | code29 | Providing & fixing White vitreous china water closet squatting pan (Indian type) along with "S" or "P" trap including dismantling of old WC seat and "S" or "P" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. Orissa pattern W.C Pan of size 580x440 mm (SR 2023-24 VP 202 I-20.44.2 Vol-2 ) | Nos | 3798.83 | 3798.83 | 3.0 | False | None | None | False | None | False | 11396.49 | 0 |
| 3925704 | 151397 | None | code30 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid (SR 2023-24 VP 132 I-14.2.1 Vol-2 ) | Each | 5181.49 | 5181.49 | 4.0 | False | None | None | False | None | False | 20725.96 | 0 |
| 3925705 | 151397 | None | code31 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : One urinal basin with 5 litre white P.V.C. automatic flushing cistern(SR 2023-24 VP 132 I-14.4.1 Vol-2 ) | Each | 4770.23 | 4770.23 | 6.0 | False | None | None | False | None | False | 28621.38 | 0 |
| 3925706 | 151397 | None | code32 | Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of structural glazing (with open joints) for linear as well as curvilinear portions of the building for all heights and all levels, including:(a) Structural analysis & design and preparation of shop drawings for the specified design loads conforming to IS 875 part III (the system must passed the proof test at 1.5 times design wind pressure without any failure), including functional design of the aluminum sections for fixing glazing panels of various thicknesses, aluminium cleats, sleeves and splice plates etc. gaskets, screws, toggles, nuts, bolts, clamps etc., structural and weather silicone sealants, flashings, fire stop (barrier)-cumsmoke seals, microwave cured EPDM gaskets for water tightness, pressure equalisation & drainage and protection against fire hazard including:(b) Fabricating and supplying serrated M.S. hot dip galvanised / Aluminium alloy of 6005 T5 brackets of required sizes, sections and profiles etc. to accommodate 3 Dimentional movement for achieving perfect verticality and fixing structural glazing system rigidly to the RCC/ masonry/ structural steel framework of building structure using stainless steel anchor fasteners/ bolts, nylon seperator to prevent bimetallic contacts with nuts and washers etc. of stainless steel grade 316, of the required capacity and in required numbers.(c)Providing and filling, two part pump filled, structural silicone sealant and one part weather silicone sealant compatible with the structural silicone sealant of required bite size in a clean and controlled factory / work shop environment, including double sided spacer tape, setting blocks and backer rod, all of approved grade, brand and manufacture, as per the approved sealant design, within and all around the perimeter for holding glass.(d)Providing and fixing in position flashings of solid aluminium sheet 1 mm thick and of sizes, shapes and profiles, as required as per the site conditions, to seal the gap between the building structure and all its interfaces with curtain glazing to make it watertight.(e) Making provision for drainage of moisture/ water that enters the curtain glazing system to make it watertight, by incorporating principles of pressure equalization, providing suitable gutter profiles at bottom (if required), making necessary holes of required sizes and of required numbers etc. complete. | Sqm | 2875.63 | 2875.63 | 121.0 | False | None | None | False | None | False | 347951.23 | 0 |
| 3925707 | 151397 | None | code33 | Providing and fixing of Aluminium composite panel of approved make and colour for wall cladding for Brick/Rcc/stone walls & coloumns/beams with necessary aluminium frame works at required level made out of
50x25x4mm C section or equivalent. The panel should consist of 3mm thick non-halogenated FR grade mineral based polymer ( 2 hrs fire resistance as per ASTM E119-12 and clause B, S1, do as per ENT 13501-1 sandwiched between 0.50 skins thick aluminium sheet making a total panel thickness of 4mm. The surfaces will be finished with PVDF based coating on topsides and service coating on reverse sides would be in polyester paint. The system shall be fixed using GI brackets, aluminium L cleats and stainless steel bolts and nuts complete with spring washer and cap nuts and all other necessary accessories, sealing shall be done with necessary rods etc., complete For Straight Portion (SR 2023-24 V-3 VP-71 I-10.15.1) | Sqm | 4272.21 | 4272.21 | 100.0 | False | None | None | False | None | False | 427221.0 | 0 |
| 3925708 | 151397 | None | code34 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding (SR 2023-24 V-2 VP-86 I-11.34A) | Kgs | 474.87 | 474.87 | 550.0 | False | None | None | False | None | False | 261178.5 | 0 |
| 3925709 | 151397 | None | code35 | Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 g/L and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 L/ 10 m². Over and including priming coat of exterior primer applied @ 0.90 L/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. SR-2023-24 V-II VP-46 I-8.32 | Sqm | 167.07 | 167.07 | 900.0 | False | None | None | False | None | False | 150363.0 | 0 |
| 3925710 | 151397 | None | code36 | Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.SR-2023-24 V-II VP-46 I- | Sqm | 95.31 | 95.31 | 700.0 | False | None | None | False | None | False | 66717.0 | 0 |
| 3925711 | 151397 | None | code37 | Providing and supplying cupboard shutter with 18mm thick one side Architect recommended decorative laminate (1mm thick) and other side balancing lamination(preferably white) HDHMR BOARD of approved brand complete as per direction of engineer in-charge.(Payment of providing and fixing auto closing hinges shall be paid separately) SR 2023-24 Vol-2 I-22.5 VP-217 | Sqm | 2824.5 | 2824.5 | 50.0 | False | None | None | False | None | False | 141225.0 | 0 |
| 3925712 | 151397 | None | code38 | Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6 kg/m2 to achieve final DFT (Dry Film Thickness) of 1mm including prime coat of epoxy primer @150 g/m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification SR 2023-24 Vol-2 I- 15.1 VP-149 | Sqm | 875.0 | 875.0 | 525.0 | False | None | None | False | None | False | 459375.0 | 0 |
| 3925713 | 151397 | None | code39 | ELECTRIFICATION
Supplying TR split Airconditioners suitable for operation on A/C supply single phase 50Hz 230V with hermetically sealed compressor with aircooled condenser, motorcapacitor and start runcapacitors, relay and overload protector in ternal unit, with one indoor and one out door unit The condenser unit will be placed outside the room on the terrace to avoid noise including standard length of suitable size copper tubing covered within sulation tube. (Highwallchorded/cordless suitable capacity 3 cores heathed/ PVC copper cable and a battery operated wireless remote unit 5 Star 1 Ton capacity (PW Ele 2023-24 VP-31 I-6.7.1) | Each | 43791.3 | 43791.3 | 2.0 | False | None | None | False | None | False | 87582.6 | 0 |
| 3925714 | 151397 | None | code40 | Installation charges for split type air conditioner with allied works for one indoor and one outdoor unit is to be mounted on suitable Angle Iron support upto 3.0 Ton split/cassette type A/C. (PW Ele 2023-24 VP-39 I-6.12) | Each | 3281.25 | 3281.25 | 2.0 | False | None | None | False | None | False | 6562.5 | 0 |
| 3925715 | 151397 | None | code41 | Sun Control Film (Market Rate) | Sqm | 300.0 | 300.0 | 45.0 | False | None | None | False | None | False | 13500.0 | 0 |
| 3925716 | 151397 | None | code42 | Supplying, erecting, testing & commissioning of OFF-EUPS system suitable for operation on 230V,50Hz, A/C supply, with all accessories complete and Excluding batteries and wiring complete. 1.5 kVA OFF LINE UPS (PW Ele 2023-24 VP-38 I-9.2.2) | Each | 21139.7 | 21139.7 | 2.0 | False | None | None | False | None | False | 42279.4 | 0 |
| 3925717 | 151397 | None | code43 | Supplying and fixing 32Amps security and energy saving DP switch with key tag suitable to operate on 230 Volts, 50Hz AC supply & completely wired on existing box. SR 2023-24 vol-6 VP 6 I- 3.7 | Nos | 646.0 | 646.0 | 2.0 | False | None | None | False | None | False | 1292.0 | 0 |
| 3925718 | 151397 | None | code44 | Supplying 2mm thick 20mm dia pvc conduict with required accessories before casting roof/column and fixing on wall after grove cutting and wiring using copper wire and required materials for laying of conduict and includes screws, bends, deep junction boxe Short point (Up to 3 Mtrs) SR2023-24 nVP 5 I- 2.1.1 | Nos | 269.0 | 269.0 | 32.0 | False | None | None | False | None | False | 8608.0 | 0 |
| 3925719 | 151397 | None | code45 | A) Medium point (3mtrs to 6 Mtrs) SR2023-24 nVP 5 I- 2.1.1 | Nos | 379.0 | 379.0 | 28.0 | False | None | None | False | None | False | 10612.0 | 0 |
| 3925720 | 151397 | None | code46 | C) Long point ( From 6 mts to 10 Mtr) SR 2023-24 vol-6 VP-2 I- 2.1.1 | Nos | 555.0 | 555.0 | 14.0 | False | None | None | False | None | False | 7770.0 | 0 |
| 3925721 | 151397 | None | code47 | Supplying 6 amps 3/5 way flush / projected by socket and 5 amps flush type SP, switch either surface mounted on a gang box or in a 4mm thick plastic sheet and fixing over a flash mounted on TW box and wiring using necessary wire SR 2023-24 vol-6 VP-5 I- 3.1.2 | Nos | 147.0 | 147.0 | 14.0 | False | None | None | False | None | False | 2058.0 | 0 |
| 3925722 | 151397 | None | code48 | Supplying and fixing 32Amps security and energy saving DP switch with key tag suitable to operate on 230 Volts, 50Hz AC supply & completely wired on existing box. SR 2023-24 vol-6 VP 6 I- 3.7 | Nos | 646.0 | 646.0 | 14.0 | False | None | None | False | None | False | 9044.0 | 0 |
| 3925723 | 151397 | None | code49 | Supplying and fixing teak wood board with out front plank made out of not 15mm thick planks with planks made out of not more than two pieces and fixing the same to the wall using tappered inverted teak wood plugs screwed etc ,A. 254x178x76mm (10'x7'x3)
SR 2023-24 vol-6 VP 05 I-1.6.3 | Each | 112.0 | 112.0 | 28.0 | False | None | None | False | None | False | 3136.0 | 0 |
| 3925724 | 151397 | None | code50 | 32 Amps Bakelite DP
SR 2023-24 vol-6 VP - 06 I- 3.14.13 | Nos | 232.0 | 232.0 | 14.0 | False | None | None | False | None | False | 3248.0 | 0 |
| 3925725 | 151397 | None | code51 | Supplying and drawing PVC insulated flexible copper wire of approved make.A.40/0.0040 copper wire SR 2023-24 vol-6 VP - 6 I- 2.4.3 | Rmtr | 29.0 | 29.0 | 500.0 | False | None | None | False | None | False | 14500.0 | 0 |
| 3925726 | 151397 | None | code52 | B. 70/0.0052 copper wire. SR 2023-24 vol-6 VP - 6 I- 2.4.8 | Rmtr | 30.0 | 30.0 | 500.0 | False | None | None | False | None | False | 15000.0 | 0 |
| 3925727 | 151397 | None | code53 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. SR 2023-24 vol-6 VP - 3 I- 2.3.6 | Rmtr | 167.0 | 167.0 | 495.0 | False | None | None | False | None | False | 82665.0 | 0 |
| 3925728 | 151397 | None | code54 | Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit … The pit should be filled with equal proportion of salt and charcoal 150mm all-round the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI wire of size as per ISI specification 7.3.3. of IS 732 using 12mm dia bolts, nuts, washers and check nuts etc., the pipe shall have 16 through holes of 12 mm dia SR 2023-24 vol-6 VP - 40 I- 6.1 | Each | 2999.7 | 2999.7 | 6.0 | False | None | None | False | None | False | 17998.2 | 0 |
| 3925729 | 151397 | None | code55 | Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve , indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 6-32 Amps SP.SR 2023-24 vol-6 I. No. 5.18.4, Pg No. 13 | Each | 739.0 | 739.0 | 1.0 | False | None | None | False | None | False | 739.0 | 0 |
| 3925730 | 151397 | None | code56 | Supplying of recess mounting non integrated type LED down light ...... W luminaire comprising of pressure decast/ extruded aluminium housing, with spring loaded false ceiling clamps, LED of Power/COB with CCT 6500 degree K, CRI 70%. efficacy 100 lumen per watt, 120degree beam spread, life 25000 burning hours and Compliance to IS10322/IEC 60598, LM 79 & LM 80. The lamp compartmentis enclosed with anti glare opal diffuser which enhances the lighting level. LEDs are driven by HF electronic driver integrated in a separate control gear assembly., with PF 0.95, power loss should 5% of lamp wattage., short circuit & open circuit protection to be integrated in the circuit,THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 volts. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. SR 2023-24 vol-6 VP 34 I 11.4.2 | Each | 1269.0 | 1269.0 | 30.0 | False | None | None | False | None | False | 38070.0 | 0 |
| 3925731 | 151397 | None | code57 | Supplying of Ceiling Fan with Capacitor rating As per guideline of BEE 5 star rating and IS:374/79 and also comply with IS:1709/1984 with latest amendment, Rated voltage 220 V/ 50 Hz, Rated power input 48 W +/- 10 %, Rated current As per IS:374/79, Rated power factor 0.9 lagging(min), Rated speed 350 +/- 10% RPM, Rated air delivery 210 +/- 10% Cubic Meter Minimum, Rated service value 4.2 CMM / Watt, Three Blades of blade leaf 1.05 mm thick Aluminium Alloy sheet, Class B motor insulation, Bearing Two ball bearings, Top 6202, Bottom 6201 , as per IS specification, Motor wdg. Temp rise Shall not exceed 75 deg C over and ambient of 40 0C by resistance method at 245 Volts, Insulation resistance Shall not be less than Two Mega Ohms (2 M Ohms), Leakage current Should not exceed 210 Micro Amp, Power input, watt& current , Air Delivery & Fan Speed as per IS:374/1979 with latest amendment, 2 year manufacturer Warranty. 48" Sweep 5 Star (1200mm)SR 2023-24 vol-6 I- 6.4.1 VP 23 | Each | 2949.0 | 2949.0 | 20.0 | False | None | None | False | None | False | 58980.0 | 0 |
| 3925732 | 151397 | None | code58 | Fixingaceiling/wallmountingfanofallcapacitiesandalltypes,withnecessaryclampsand'S'hookmadeoutof15mmdiaMSrod,with5A.ceilingroseofapprovedqualitywithnecessarylengthof23/0.0076inchPVCinsulatedtwintwistedwireofapprovedquality,mounted on a suitable size wooden board and wired..SR 2023-24 vol-6 I- 13.11 VP 46 | Each | 315.0 | 315.0 | 20.0 | False | None | None | False | None | False | 6300.0 | 0 |
| 3925733 | 151397 | None | code59 | Supplying exhaust fan with bracket blades complete for LIGHT DUTY of approved make crompton / almonard of size 457mm or (18") 900 RPM. SR 2023-24 vol-6 VP-22 I-6.1 | Nos | 1492.0 | 1492.0 | 8.0 | False | None | None | False | None | False | 11936.0 | 0 |
| 3925734 | 151397 | None | code60 | Fixing one exhaust fan after making a suitable hole in the wall finishing with CM and welding to existing wall or brackets with bolts and nuts and 5amps ceiling rose with sufficient length of 23/0.0076" PVC insulated twin core wire of approved make. SR 2023-24 vol-6 VP 46 I-13.13 | Nos | 707.0 | 707.0 | 8.0 | False | None | None | False | None | False | 5656.0 | 0 |
| 3925735 | 151397 | None | code61 | Design, supplying, erecting testing and commissioning of - Passenger/ Bed-cum-passenger hospital lift with speed of 1mtr per second, variable voltage variable frequency drive, with or without machine room for the available well size, operating at 415 V 3 phase 50 cycles AC supply, powder coated / Stainless Steel car entrance doors enclosures with suitable colour vinyl flooring, LED car illumination, emergency light, intercom and fan as desired by the user, central opening / side opening door with or without attendant operation, 7 segment display buttons, call register indicator, fireman drive, SS handrails inside car, full length infrared curtain in car door, automatic rescue device with batteries, voice announcing in regional/ international languages, Braille buttons with one year warranty and maintenance with necessary scaffolding and minor civil works like fixing of guide rail, counter weight etc.,The total product and services shall adhere to IS 14665/2016 ( with latest amendments) part/section 1 to 5 with regards to general guidelines of fire safety rated doors, MRLL beams, pressure switch, manual change over for doors during emergency, ARD of 10 times with sufficient battery back up and standard dimensions of chair car and door openings for all sizes and capacities of lifts including fitness certificate and duly observing all other safety norms prescribed and adhere to CPWD specifications, PCB Norms, National Electricity Code (NEC), NBC-2016, IEC and Karnataka State Lifts, Escalators and Passengers Conveyers Act 2012 and Rules 2014. The Supplier shall be registered in Government Electrical Inspectorate in the State of Karnataka SR 2023-24 I- 14.2.2 VP-59 | Each | 1587578.45 | 1587578.45 | 1.0 | False | None | None | False | None | False | 1587578.45 | 0 |
| 3925736 | 151397 | None | code62 | Wiring for Lift | LS | 25000.0 | 25000.0 | 1.0 | False | None | None | False | None | False | 25000.0 | 0 |
| 3925737 | 151397 | None | code63 | Lan connection with server room | LS | 200000.0 | 200000.0 | 1.0 | False | None | None | False | None | False | 200000.0 | 0 |
| 3925738 | 151397 | None | code64 | PART-B OFFICE FURNITURE
S.E.Cabin Furniture
Main Table 2100x900x750H with Pedestal 450x550x670 ht.
Extn. Table 1200x600x750 with Storage | Nos | 66216.0 | 66216.0 | 1.0 | False | None | None | False | None | False | 66216.0 | 0 |
| 3925739 | 151397 | None | code65 | Discussion Table 4200x1100x750 ht. | Nos | 36550.0 | 36550.0 | 1.0 | False | None | None | False | None | False | 36550.0 | 0 |
| 3925740 | 151397 | None | code66 | Low ht. storage cabinet 1200x450x750H | Nos | 11473.0 | 11473.0 | 2.0 | False | None | None | False | None | False | 22946.0 | 0 |
| 3925741 | 151397 | None | code67 | Low ht. storage cabinet 1130x450x750H | Nos | 11473.0 | 11473.0 | 30.0 | False | None | None | False | None | False | 344190.0 | 0 |
| 3925742 | 151397 | None | code68 | E.E.Cabin Furniture
GDDK-180 Main Table: Size: W 1800x D 900x750 with Pedestal W 420x D 510x H 560 Extn. Table 1200x500x700 with Storage Supply & installation of Executive Table of size 1800 w x 1000 d x 750 h made of compressed particle board with postformed laminate 0.6mm and overall tk. 38mm. 2 sides PVC edge banding and other 2 sides half round postformed edges. Table will have wire manager facility, having side runner for keeping computer with the arrangement for CPU, PVC Key Board Tray and one pedestal with three drawer. Side table top will be of 25 mm tk. | Nos | 61000.0 | 61000.0 | 2.0 | False | None | None | False | None | False | 122000.0 | 0 |
| 3925743 | 151397 | None | code69 | GDSR- Side Table : Size W 1360 x D 450 x 640 h mm made of compressed particle board with postform lamianted with Key board Tray 500 w x 300 d fiber material and hanging drawer CPU Trolly metalic. | Nos | 9190.0 | 9190.0 | 2.0 | False | None | None | False | None | False | 18380.0 | 0 |
| 3925744 | 151397 | None | code70 | GDMP-MobilePedestal 420w x 510 d x 560 h made of prelaminated board. Having 3-drawer mounted on metal drawer glides of superior quality, single lock mechanism for 3-drawer and 3 D handle. | Nos | 5450.0 | 5450.0 | 2.0 | False | None | None | False | None | False | 10900.0 | 0 |
| 3925745 | 151397 | None | code71 | ZTC-3012 (Zen) Discussion Table 3000x1200x750 ht. Supply & installation of Discusion Table of size 3000 w x 1200 d x 750 h made of Table Top 40mm thick pre laminated board with matching PVC edge lipping Back : 25mm thick pre particle board with maching PVC edge lippin ModestyPanel : 1200 x 450 HT -18mm thick pre laminated particle board modesty panel of 450mm ht wire Mananement : 2 no. of 450mm aluminium flip up provision to mount switches and sockets on PVT Cable dump and vertical wire entry cover for wire uptake from floor to cable dump. | Nos | 51878.0 | 51878.0 | 2.0 | False | None | None | False | None | False | 103756.0 | 0 |
| 3925746 | 151397 | None | code72 | Composite storage cabinet 1200x450x750H
Composite. storage cabinate with one shelf, 1200 L x 450 D x 750 ht and 3 door Top 18mm thk pre laminated particle board with Back 9mm Thk per laminated particle board with 2mm PVC edge lipping Shutters 18mm Thk pre laminated particle board Edge ; All exposed area with 2mm thick PVC edge lipping Handle: Recessed handle in anodised finish Lock : Regular lock | Nos | 9190.0 | 9190.0 | 8.0 | False | None | None | False | None | False | 73520.0 | 0 |
| 3925747 | 151397 | None | code73 | A.E.E.O.,& AO. Cabin Furniture
HT-501 Senate Main Table 2000x800x780 Ht.
Supply & installation of Executive Table of size 2000 w x 800 d x 780 h Made of Senate a desk inspired by the philosophies of minimalism and usablility. Optmised to into and subtly enhance environment is a desk for te design focused consumer. By making fixtures such as cabinet handles inbuilt into te smoot dark wood cabinets this desk emerges as an object of sleek, uninterrupted lines that speak of power in the workplace. | Nos | 42153.0 | 42153.0 | 4.0 | False | None | None | False | None | False | 168612.0 | 0 |
| 3925748 | 151397 | None | code74 | V-2D1F Mobile Pedestal 400x435x640H
Mobile Pedestal 400w x 435d x 640 h made of prelaminated board. Having 3-drawer mounted on metal drawer glides of superior quality, single lock mechanism for 3-drawer and 3 D handle. | Nos | 5450.0 | 5450.0 | 6.0 | False | None | None | False | None | False | 32700.0 | 0 |
| 3925749 | 151397 | None | code75 | Composite Storage Side Credenza 1200x450x750H
Side Table made of 18mm tk. Top and sides doors and shelves made of 18mm tk. Prelaminated board. Shutters having 2 clip on hinges with lock handle of superior quality. Credenza having facility at the centre for keeping CPU & UPS | Nos | 9190.0 | 9190.0 | 6.0 | False | None | None | False | None | False | 55140.0 | 0 |
| 3925750 | 151397 | None | code76 | A.E. Cabin Furniture (Technical Section)
HT-531 Main Table 1800x750x780H
Supply & installation of Executive Table of size 1800 w x 750 d x 780 h made of compressed particle board with postformed lamination having 2 postformed edtes and 2 mm PVC edge banding on 2 sides. Table color as per the Inspecting Officer & Engineer in charge. | Nos | 43470.0 | 43470.0 | 6.0 | False | None | None | False | None | False | 260820.0 | 0 |
| 3925751 | 151397 | None | code77 | Visitor's Room Furniture
Centre Table 1000x500x450 Ht with one Shelf | Nos | 6250.0 | 6250.0 | 2.0 | False | None | None | False | None | False | 12500.0 | 0 |
| 3925752 | 151397 | None | code78 | Cashier Room Furniture VMT-1890 Main Table 1800x900x750 Ht.
Supply & installation of Executive Table of size 1800 w x 900 d x 750 h made of compressed particle board with hard lamination having straight edges of 2 mm PVC edge banding on 4 sides. | Nos | 8550.0 | 8550.0 | 1.0 | False | None | None | False | None | False | 8550.0 | 0 |
| 3925753 | 151397 | None | code79 | V-2D1F Hanging 3Dr. Drawer Unit 400x435x640H
Hanging Pedestal 400w x 450d x 400 h made of prelaminated board. Having 3-drawer mounted on metal drawer glides of superior quality, single lock mechanism for 3-drawer and 3-D handle. | Nos | 5450.0 | 5450.0 | 1.0 | False | None | None | False | None | False | 5450.0 | 0 |
| 3925754 | 151397 | None | code80 | Clerk Tables
VMT-1275 Executive Table 1200x750x750 ht.
Supply & installation of Executive Table of size 1200 w x 600 d x 750 h made of compressed particle board with hard lamination having straight edges of 2 mm PVC edge banding on 4 sides. | Nos | 6250.0 | 6250.0 | 4.0 | False | None | None | False | None | False | 25000.0 | 0 |
| 3925755 | 151397 | None | code81 | V-2DIF Hanging 3Dr. Drawer Unit 400x435x640H
Hanging Pedestal 400w x 435d x 640 h made of prelaminated board. Having 3-drawer mounted on metal drawer glides of superior quality, single lock mechanism for 3-drawer and 3-D handle. | Nos | 5450.0 | 5450.0 | 8.0 | False | None | None | False | None | False | 43600.0 | 0 |
| 3925756 | 151397 | None | code82 | Computer Operator Table
VMT-1275 Computer Table 1200x750x750 ht. with KBT 1-Drawer, CPU & UPS Rack Supply & installation of computer table of size 1200x750 x 750 h having made out of 25mm tk. hard laminated top & legs of 18mm PLB with melamine finish, one drawer, keyboard & the arrangement for keeping CPU, UPS etc. | Nos | 6250.0 | 6250.0 | 2.0 | False | None | None | False | None | False | 12500.0 | 0 |
| 3925757 | 151397 | None | code83 | Medium Height Storage With Printer Table 750x450x750 ht.
Supply & installation of printer table of size 750 x 450 x 750 ht. with stationery rack & two swing doors locakable made out of 25mm tk. laminated top and 18mm tk. prelaminated particle board for the leg, rack & swing doors. | Nos | 5550.0 | 5550.0 | 4.0 | False | None | None | False | None | False | 22200.0 | 0 |
| 3925758 | 151397 | None | code84 | EE Cabin Chair
OC-1 HB Chair
* High Back Mesh Chair (Headrest)
* Multilock Mechanism
* Gaslift
* Two Way Adjustable Arms (Height &
Swivel)
* Nylon Base
* Nylon Castors | Nos | 21750.0 | 21750.0 | 2.0 | False | None | None | False | None | False | 43500.0 | 0 |
| 3925759 | 151397 | None | code85 | EE Cabin Discussion Chair
Amaze MB Premium Exect. Chair
* Medium Back Mess Chair
* KM Series Mesh
* Self Calibrating Multilock Mechanism
* Adjustable Lumbar Support
* Height Adjustable Arms
* Nylon Castors | Nos | 8690.0 | 8690.0 | 20.0 | False | None | None | False | None | False | 173800.0 | 0 |
| 3925760 | 151397 | None | code86 | Cabin chair for AEEO & AO ANATOM HB Chair with armrest
* Anatom Medium Back Chair
* Mesh Back
* With Headrest
* Single Lock Synchro Mechanism
* Adjustable Lumbar Support
* One Way Adjustable Arms (Height)
* Nylon Base | Nos | 9765.0 | 9765.0 | 4.0 | False | None | None | False | None | False | 39060.0 | 0 |
| 3925761 | 151397 | None | code87 | Visitors chair for above cabins
Forum VA PC 4 Leg visitor chair with armrest
* Forum Low Back Mesh Chair
* Visitor Chair
* Fixed Arms
* Powdercoated Four Legs with Nylon castors | Nos | 6150.0 | 6150.0 | 8.0 | False | None | None | False | None | False | 49200.0 | 0 |
| 3925762 | 151397 | None | code88 | Visitors chair for above cubicals Forum VA PC 4 Legs visitor chair with armrest
* Forum Low Back Mesh Chair
* Visitor Chair
* Fixed Arms
* Powdercoated Four Legs with Nylon castors | Nos | 6150.0 | 6150.0 | 16.0 | False | None | None | False | None | False | 98400.0 | 0 |
| 3925763 | 151397 | None | code89 | Workstation chair
Forum MB . Chair with armrest
* Forum Low Back Mesh Chair
* Centre Titi Mechansim
* Fixed Arms
* Nylon Base | Nos | 7950.0 | 7950.0 | 14.0 | False | None | None | False | None | False | 111300.0 | 0 |
| 3925764 | 151397 | None | code90 | Visitors Room - SJ -820 Steel tandem seating - 3-seater with fibre shell seats | Nos | 20500.0 | 20500.0 | 2.0 | False | None | None | False | None | False | 41000.0 | 0 |
| 3925765 | 151397 | None | Code91 | Visitors Room - SJ-820 Steel tandem seating - 2-seater with fiber shell seats | No | 15750.0 | 15750.0 | 2.0 | False | None | None | False | None | False | 31500.0 | 0 |
| 3925766 | 151397 | None | Code92 | PART C- Service connection PART - A 11KV LINE of 120 Mtrs.
9Mtr RCC Pole for LT Line & 3rd pole Material portion | No | 7429.8 | 7429.8 | 1.0 | False | None | None | False | None | False | 7429.8 | 0 |
| 3925767 | 151397 | None | Code93 | Labour Charges for 9Mtr RCC Pole for LT Line & 3rd pole | No | 1829.1 | 1829.1 | 1.0 | False | None | None | False | None | False | 1829.1 | 0 |
| 3925768 | 151397 | None | Code94 | DP Structure only excluding poles | Set | 8832.6 | 8832.6 | 1.0 | False | None | None | False | None | False | 8832.6 | 0 |
| 3925769 | 151397 | None | Code95 | Labor Charges for DP Structure only excluding poles | Set | 2003.4 | 2003.4 | 1.0 | False | None | None | False | None | False | 2003.4 | 0 |
| 3925770 | 151397 | None | Code96 | 11 KV, 5KN Polymeric Pin Insulator (24mm DiaFRP Rod | Set | 215.25 | 215.25 | 3.0 | False | None | None | False | None | False | 645.75 | 0 |
| 3925771 | 151397 | None | Code97 | 11KV 45 KN Polymeric Insulator | Set | 195.3 | 195.3 | 3.0 | False | None | None | False | None | False | 585.9 | 0 |
| 3925772 | 151397 | None | Code98 | 11kV Horizontal cross arms with clamps, HTST Supports, bolts, nuts and washers (for RCC poles) | Set | 678.3 | 678.3 | 2.0 | False | None | None | False | None | False | 1356.6 | 0 |
| 3925773 | 151397 | None | Code99 | Labour Charges for 11kV Horizontal cross arms with clamps, HTST Supports, bolts, nuts and washers (for RCC poles) | Set | 128.1 | 128.1 | 2.0 | False | None | None | False | None | False | 256.2 | 0 |
| 3925774 | 151397 | None | Code100 | Spiral Earth Electrode | No | 250.95 | 250.95 | 1.0 | False | None | None | False | None | False | 250.95 | 0 |
| 3925775 | 151397 | None | Code101 | Labour Charges for Earth Electrode | No | 97.65 | 97.65 | 1.0 | False | None | None | False | None | False | 97.65 | 0 |
| 3925776 | 151397 | None | Code102 | 11KV GOS set 200A SB | Set | 9922.5 | 9922.5 | 2.0 | False | None | None | False | None | False | 19845.0 | 0 |
| 3925777 | 151397 | None | Code103 | Labour Charges for 11KV GOS set 200A SB | Set | 1159.2 | 1159.2 | 2.0 | False | None | None | False | None | False | 2318.4 | 0 |
| 3925778 | 151397 | None | Code104 | H Frame set for fixing GOS set | Set | 4548.6 | 4548.6 | 2.0 | False | None | None | False | None | False | 9097.2 | 0 |
| 3925779 | 151397 | None | Code105 | Labour Charges for H Frame set for fixing GOS set | Set | 339.15 | 339.15 | 2.0 | False | None | None | False | None | False | 678.3 | 0 |
| 3925780 | 151397 | None | Code106 | HG fuse unit 11KV class at tapping point | Set | 1122.45 | 1122.45 | 2.0 | False | None | None | False | None | False | 2244.9 | 0 |
| 3925781 | 151397 | None | Code107 | Labour Charges for HG fuse unit 11KV class at tapping point | Set | 248.85 | 248.85 | 2.0 | False | None | None | False | None | False | 497.7 | 0 |
| 3925782 | 151397 | None | Code108 | Rabbit ACSR Conductor for 11 KV Line Jumps | Km | 61463.85 | 61463.85 | 0.05 | False | None | None | False | None | False | 3073.1925 | 0 |
| 3925783 | 151397 | None | Code109 | Labour Charges for Rabbit ACSR Conductor for 11 KV Line Jumps | Km | 4579.05 | 4579.05 | 0.05 | False | None | None | False | None | False | 228.9525 | 0 |
| 3925784 | 151397 | None | Code110 | 11KV UG Cable
11kv class 3x95Sq.mm XLPE UG Cable (Round Armoured) | Mtr | 934149.3 | 934149.3 | 0.12 | False | None | None | False | None | False | 112097.916 | 0 |
| 3925785 | 151397 | None | Code111 | Cable termination kit out door/Indoor suitable for 95 sq mm HS type | Each | 4270.35 | 4270.35 | 4.0 | False | None | None | False | None | False | 17081.4 | 0 |
| 3925786 | 151397 | None | Code112 | Cable covering tiles 250x250x40 | No | 10.77 | 10.77 | 480.0 | False | None | None | False | None | False | 5169.6 | 0 |
| 3925787 | 151397 | None | Code113 | Artificial/Manufacture Sand | CUBIC METER | 2063.25 | 2063.25 | 5.0 | False | None | None | False | None | False | 10316.25 | 0 |
| 3925788 | 151397 | None | Code114 | RCC Hume pipe 2000mm long & 150mm dia for Road/ Gutter crossing | No | 322.35 | 322.35 | 20.0 | False | None | None | False | None | False | 6447.0 | 0 |
| 3925789 | 151397 | None | Code115 | RCC Callers for Hume pipe | No | 86.1 | 86.1 | 20.0 | False | None | None | False | None | False | 1722.0 | 0 |
| 3925790 | 151397 | None | Code116 | G I Pipe for Cable Raising, 100mm dia. | Mtr | 1604.4 | 1604.4 | 20.0 | False | None | None | False | None | False | 32088.0 | 0 |
| 3925791 | 151397 | None | Code117 | Cable Joint & Route indicating stones | No | 139.65 | 139.65 | 4.0 | False | None | None | False | None | False | 558.6 | 0 |
| 3925792 | 151397 | None | Code118 | U G Cable Labour charges Cable trench excavation 1000x0.6x1=600 (For Laying of 400,240,95 Sqmm Cable Variour necessary). | CUBIC METER | 271.95 | 271.95 | 100.0 | False | None | None | False | None | False | 27195.0 | 0 |
| 3925793 | 151397 | None | Code119 | Tar Road | CUBIC METER | 619.5 | 619.5 | 100.0 | False | None | None | False | None | False | 61950.0 | 0 |
| 3925794 | 151397 | None | Code120 | Cement Concrete Road | CUBIC METER | 1131.9 | 1131.9 | 100.0 | False | None | None | False | None | False | 113190.0 | 0 |
| 3925795 | 151397 | None | Code121 | Laying of cable in trench | Km | 64388.1 | 64388.1 | 0.1 | False | None | None | False | None | False | 6438.81 | 0 |
| 3925796 | 151397 | None | Code122 | Refilling & consolidation | CUBIC METER | 168.0 | 168.0 | 100.0 | False | None | None | False | None | False | 16800.0 | 0 |
| 3925797 | 151397 | None | Code123 | Making of cable terminations | No | 2790.9 | 2790.9 | 4.0 | False | None | None | False | None | False | 11163.6 | 0 |
| 3925798 | 151397 | None | Code124 | Covering the cable with tiles | Km | 4585.35 | 4585.35 | 0.1 | False | None | None | False | None | False | 458.535 | 0 |
| 3925799 | 151397 | None | Code125 | Spreading the sand & forming with sand round the cable | Km | 15550.5 | 15550.5 | 0.1 | False | None | None | False | None | False | 1555.05 | 0 |
| 3925800 | 151397 | None | Code126 | Laying of RCC Hume pipe | Mtr | 72.45 | 72.45 | 20.0 | False | None | None | False | None | False | 1449.0 | 0 |
| 3925801 | 151397 | None | Code127 | Laying of GI Pipe | Mtr | 97.65 | 97.65 | 20.0 | False | None | None | False | None | False | 1953.0 | 0 |
| 3925802 | 151397 | None | Code128 | Laying of Joint & Route indicating stones | No | 90.3 | 90.3 | 4.0 | False | None | None | False | None | False | 361.2 | 0 |
| 3925803 | 151397 | None | Code129 | Part B: Transformer Centers for 1 X 100 KVA DPTS with TC. 9 Mtr RCC DP, Transformer Structure for 100 KVA & 63 KVA. | No | 33131.7 | 33131.7 | 1.0 | False | None | None | False | None | False | 33131.7 | 0 |
| 3925804 | 151397 | None | Code130 | Labour charges for 9 Mtr RCC DP, Transformer Structure for 100 KVA & 63 KVA. | No | 7332.15 | 7332.15 | 1.0 | False | None | None | False | None | False | 7332.15 | 0 |
| 3925805 | 151397 | None | Code131 | 11kV/433V, 100 kVA, 3 Phase 50 Cys Distribution Transformer BEE -5 Star Rated with Oil | No | 233049.6 | 233049.6 | 1.0 | False | None | None | False | None | False | 233049.6 | 0 |
| 3925806 | 151397 | None | Code132 | Labour charges for 11kV/433V, 100 kVA, 3 Phase 50 Cys Distribution Transformer BEE -5 Star Rated with Oil | No | 1669.5 | 1669.5 | 1.0 | False | None | None | False | None | False | 1669.5 | 0 |
| 3925807 | 151397 | None | Code133 | 11 KV, 5KN Polymeric Pin Insulator (24mm DiaFRP Rod | Set | 215.25 | 215.25 | 3.0 | False | None | None | False | None | False | 645.75 | 0 |
| 3925808 | 151397 | None | Code134 | 11KV 45 KN Polymeric Insulator | Set | 195.3 | 195.3 | 3.0 | False | None | None | False | None | False | 585.9 | 0 |
| 3925809 | 151397 | None | Code135 | Guy set with 2 Nos. 15 Strain Insulator & Concreting materials as per Dwg No. BESCOM/GM/CP/7 Dt: 24.10.07 | No | 1290.45 | 1290.45 | 4.0 | False | None | None | False | None | False | 5161.8 | 0 |
| 3925810 | 151397 | None | Code136 | Labour charges for Guy set with 2 Nos. 15 Strain Insulator & Concreting materials as per Dwg No. BESCOM/GM/CP/7 Dt: 24.10.07 | No | 667.8 | 667.8 | 4.0 | False | None | None | False | None | False | 2671.2 | 0 |
| 3925811 | 151397 | None | Code137 | Earthing materials pipe type for grounding as per Drawing No. BESCOM/GM/CP/15 & 34/ Dt: 24.10.07 | Set | 2280.6 | 2280.6 | 3.0 | False | None | None | False | None | False | 6841.8 | 0 |
| 3925812 | 151397 | None | Code138 | Labour charges for Earthing materials pipe type for grounding as per Drawing No. BESCOM/GM/CP/15 & 34/ Dt: 24.10.07 | Set | 996.45 | 996.45 | 3.0 | False | None | None | False | None | False | 2989.35 | 0 |
| 3925813 | 151397 | None | Code139 | Caution/Danger Board as per Drawing No.BESCOM/GM/ CP/40 Dt: 24.10.07 | No | 157.5 | 157.5 | 1.0 | False | None | None | False | None | False | 157.5 | 0 |
| 3925814 | 151397 | None | Code140 | Labour charges for Caution/Danger Board as per Drawing No. BESCOM/GM/ CP/40/ Dt: 24.10.07 | No | 84.0 | 84.0 | 1.0 | False | None | None | False | None | False | 84.0 | 0 |
| 3925815 | 151397 | None | Code141 | Anti Climbing Device (12mtrs/1Kg GI Barbed Wire) Lumpsum | Kg | 93.45 | 93.45 | 2.0 | False | None | None | False | None | False | 186.9 | 0 |
| 3925816 | 151397 | None | Code142 | Labour charges for Anti Climbing Device (12mtrs/1Kg GI Barbed Wire) Lumpsum | Kg | 40.95 | 40.95 | 2.0 | False | None | None | False | None | False | 81.9 | 0 |
| 3925817 | 151397 | None | Code143 | Labour charges for Concreting for Guy sets without cement | No | 262.5 | 262.5 | 4.0 | False | None | None | False | None | False | 1050.0 | 0 |
| 3925818 | 151397 | None | Code144 | GI Wire 8 SWG | Kg | 78.79 | 78.79 | 5.0 | False | None | None | False | None | False | 393.95 | 0 |
| 3925819 | 151397 | None | Code145 | Guy wire 7/10 SWG | Kg | 81.08 | 81.08 | 10.0 | False | None | None | False | None | False | 810.8 | 0 |
| 3925820 | 151397 | None | Code146 | 11kV Lightning Arrester, Metal Oxide 9kV, 5kA | Set | 1663.2 | 1663.2 | 1.0 | False | None | None | False | None | False | 1663.2 | 0 |
| 3925821 | 151397 | None | Code147 | Labour charges for 11kV Lightning Arrester, Metal Oxide 9kV, 5kA | Set | 124.95 | 124.95 | 1.0 | False | None | None | False | None | False | 124.95 | 0 |
| 3925822 | 151397 | None | Code148 | LT Protection Kit for 100 KVA & 63 kVA | No | 2124.15 | 2124.15 | 2.0 | False | None | None | False | None | False | 4248.3 | 0 |
| 3925823 | 151397 | None | Code149 | Labour charges for LT Protection Kit for 100 KVA & 63 kVA | No | 373.8 | 373.8 | 2.0 | False | None | None | False | None | False | 747.6 | 0 |
| 3925824 | 151397 | None | Code150 | LT Distribution box for 100 kVA & 63 KVA with MCB | No | 23820.3 | 23820.3 | 1.0 | False | None | None | False | None | False | 23820.3 | 0 |
| 3925825 | 151397 | None | Code151 | LT Distribution box for 100 kVA & 63 KVA with MCB | No | 404.25 | 404.25 | 1.0 | False | None | None | False | None | False | 404.25 | 0 |
| 3925826 | 151397 | None | Code152 | i. PVC Insulated & Un-Sheathed Aluminium Wires, Single Core Multi strand 1.1 kV class 120 Sq.mm. | Mtr | 150.35 | 150.35 | 45.0 | False | None | None | False | None | False | 6765.75 | 0 |
| 3925827 | 151397 | None | Code153 | Labour charges for PVC Insulated & Un-Sheathed Aluminium Wires, Single Core Multi strand 1.1 kV class 120 Sq.mm | Mtr | 996.45 | 996.45 | 1.0 | False | None | None | False | None | False | 996.45 | 0 |
| 3925828 | 151397 | None | Code154 | ii. Copper lugs - 120 Sqmm | No | 147.0 | 147.0 | 12.0 | False | None | None | False | None | False | 1764.0 | 0 |
| 3925829 | 151397 | None | Code155 | iii. PG Clamps - Rabbit to 120 Sqmm | No | 285.6 | 285.6 | 4.0 | False | None | None | False | None | False | 1142.4 | 0 |
| 3925830 | 151397 | None | Code156 | iv. Spacers for DTC Wiring | No | 44.1 | 44.1 | 8.0 | False | None | None | False | None | False | 352.8 | 0 |
| 3925831 | 151397 | None | Code157 | v. Fish Plate with necessary Clamps,bolts & nuts etc complete (Galvanised) | No | 222.6 | 222.6 | 2.0 | False | None | None | False | None | False | 445.2 | 0 |
| 3925832 | 151397 | None | Code158 | LT Metering Box for housing the ETV Meter with CT's busbar wiring etc. | No | 6197.1 | 6197.1 | 1.0 | False | None | None | False | None | False | 6197.1 | 0 |
| 3925833 | 151397 | None | Code159 | Labour charges for LT Metering Box for housing the ETV Meter with CT's busbar wiring etc. | No | 584.85 | 584.85 | 1.0 | False | None | None | False | None | False | 584.85 | 0 |
| 3925834 | 151397 | None | Code160 | LT Electronic Tri-Vector Meter 5A, Class-0.5/1.0 accuracy | No | 3477.6 | 3477.6 | 1.0 | False | None | None | False | None | False | 3477.6 | 0 |
| 3925835 | 151397 | None | Code161 | Labour charges for LT Electronic Tri-Vector Meter 5A, Class-0.5/1.0 accuracy | No | 837.9 | 837.9 | 1.0 | False | None | None | False | None | False | 837.9 | 0 |
| 3925836 | 151397 | None | Code162 | H-Frame for mounting GOS | No | 339.15 | 339.15 | 1.0 | False | None | None | False | None | False | 339.15 | 0 |
| 3925837 | 151397 | None | Code163 | Labour charges for H-Frame for mounting GOS | No | 4548.6 | 4548.6 | 1.0 | False | None | None | False | None | False | 4548.6 | 0 |
| 3925838 | 151397 | None | Code164 | 11kV Solid Core Type HG Fuse Unit | Set | 1122.45 | 1122.45 | 1.0 | False | None | None | False | None | False | 1122.45 | 0 |
| 3925839 | 151397 | None | Code165 | Labour charges for 11kV Solid Core Type HG Fuse Unit | Set | 248.85 | 248.85 | 1.0 | False | None | None | False | None | False | 248.85 | 0 |
| 3925840 | 151397 | None | Code166 | 11kV, 200Amps, Single Break GOS | No | 9922.5 | 9922.5 | 1.0 | False | None | None | False | None | False | 9922.5 | 0 |
| 3925841 | 151397 | None | Code167 | Labour charges for 11kV, 200Amps, Single Break GOS | No | 1159.2 | 1159.2 | 1.0 | False | None | None | False | None | False | 1159.2 | 0 |
| 3925842 | 151397 | None | Code168 | Part D: 1.1 KV 25 Sqmm LT UG Cable.
LT Feeder Piller Box 8 Way with Cutouts | No | 54724.95 | 54724.95 | 1.0 | False | None | None | False | None | False | 54724.95 | 0 |
| 3925843 | 151397 | None | Code169 | LT Feeder Piller Box 8 Way with Cutouts | No | 1756.65 | 1756.65 | 1.0 | False | None | None | False | None | False | 1756.65 | 0 |
| 3925844 | 151397 | None | Code170 | Pipe type earthing for each Feeder Piller box | Set | 2280.6 | 2280.6 | 1.0 | False | None | None | False | None | False | 2280.6 | 0 |
| 3925845 | 151397 | None | Code171 | Pipe type earthing for each Feeder Piller box | Set | 996.45 | 996.45 | 1.0 | False | None | None | False | None | False | 996.45 | 0 |
| 3925846 | 151397 | None | Code172 | Armored L.T.UG Cable 1.1KV Class 25 sqmm. 3.5 Core. | Km | 146526.45 | 146526.45 | 0.1 | False | None | None | False | None | False | 14652.645 | 0 |
| 3925847 | 151397 | None | Code173 | Armored L.T.UG Cable 1.1KV Class 25 sqmm. 3.5 Core. | Km | 32695.95 | 32695.95 | 0.1 | False | None | None | False | None | False | 3269.595 | 0 |
| 3925848 | 151397 | None | Code174 | 95Sqmm Aluminum lugs for UG cable | No | 15.75 | 15.75 | 16.0 | False | None | None | False | None | False | 252.0 | 0 |
| 3925849 | 151397 | None | Code175 | PVC Pipe 50 mm dia for ground to DTC point | Mtr | 173.25 | 173.25 | 15.0 | False | None | None | False | None | False | 2598.75 | 0 |
| 3925850 | 151397 | None | Code176 | 25 sqmm All lugs for UG Cable | No | 47.25 | 47.25 | 16.0 | False | None | None | False | None | False | 756.0 | 0 |
| 3925851 | 151397 | None | Code177 | Sand | CUBIC METER | 2063.25 | 2063.25 | 5.0 | False | None | None | False | None | False | 10316.25 | 0 |
| 3925852 | 151397 | None | Code178 | Construction of plate form of Size (0.6x1.2x1.2) mtrs for mounting of 8 Way & 12 way feeder piller box | Each | 10290.0 | 10290.0 | 1.0 | False | None | None | False | None | False | 10290.0 | 0 |
| 3925853 | 151397 | None | Code179 | Cable Joint & Route indicating stones | No | 139.65 | 139.65 | 4.0 | False | None | None | False | None | False | 558.6 | 0 |
| 3925854 | 151397 | None | Code180 | Labour charges for Cable Joint & Route indicating stones | No | 90.3 | 90.3 | 4.0 | False | None | None | False | None | False | 361.2 | 0 |
| 3925855 | 151397 | None | Code181 | c) Refilling & consolidation | CUBIC METER | 168.0 | 168.0 | 100.0 | False | None | None | False | None | False | 16800.0 | 0 |
| 3925856 | 151397 | None | Code182 | e) Covering the cable with tiles | Km | 4585.35 | 4585.35 | 0.1 | False | None | None | False | None | False | 458.535 | 0 |
| 3925857 | 151397 | None | Code183 | f) Spreading the sand & forming with sand round the cable | Km | 15550.5 | 15550.5 | 0.1 | False | None | None | False | None | False | 1555.05 | 0 |
| 3925858 | 151397 | None | Code184 | Cable trench excavation 75x0.6x1=Ordinary Soil | CUBIC METER | 271.95 | 271.95 | 100.0 | False | None | None | False | None | False | 27195.0 | 0 |
| 3925859 | 151397 | None | Code185 | Brass Cable Glands for Service Mains | No | 80.85 | 80.85 | 20.0 | False | None | None | False | None | False | 1617.0 | 0 |
| 3925860 | 151397 | None | Code186 | Lettering the RMU with enamel paint and also writing single line diagram of each panel, caution Board, Danger Board etc., including cost of Paint, Brush etc., | No | 1009.05 | 1009.05 | 1.0 | False | None | None | False | None | False | 1009.05 | 0 |