createdTs	None
version	None
createdDate	None
modifiedDate	None
noticeInvitingTenderDTO	createdTs 1725437978014 version 3 createdDate None modifiedDate None tenderType RFQ evaluationType TWO_COVER evaluationTypeText Two Cover invitingStrategy OPEN invitingStrategyText Open taxType INCLUSIVE_TAX tenderFee 500.00 emd 44200.00 bidValueType ITEM_WISE bidValueTypeText Item wise tenderReceiptClose 18-09-2024 17:30:00 tenderQueryClose 17-09-2024 17:30:00 technicalBidOpen 20-09-2024 10:30:00 publishedDate 05-09-2024 12:37:09 publishedByPost TMC_CO_HVHD publishedByUser KPE21835 - H IMAM SAHEB bidValidityPeriod 90 noOfCalls 1 preBidMeetingDate None preBidMeetingYn False preQualificationBidOpen None denominationType RUPEES denominationTypeText Rupees retenderedYn None percentageRateTypeText None contactPerson G U M Siddeshwaraswami splitEmdRequiredYn False emdBankGuarantee None emdCash None bgValidityPeriod None hideWeightage None multipleCurrencySelectionAllowedYn False isTechWeightageAllowed False highestBidderSelection False isVariableEmdAllowed None qcbsTenderYn None itemwiseEmdRequiredYn None sampleSubmissionDate None officeNumber 08399240237 mobileNumber 9448632417 tenderSupplierList None
tenderSchedule	createdTs 1725437978047 version 5 createdDate None modifiedDate None tenderNumber DMA/2024-25/BD/WORK_INDENT28572 title Continued Rennovation Work of Old Taluk Office Building which Handed Over to Huvinahadagali TMC And Construction Of Toilet At Muslim Khabarstan in TMC Huvinahadagali Limits description Continued Rennovation Work of Old Taluk Office Building which Handed Over to Huvinahadagali TMC And Construction Of Toilet At Muslim Khabarstan in TMC Huvinahadagali Limits category WORKS categoryText Works ecv 1767999.98 deptName Directorate of Municipal Administration status PUBLISHED statusText Published remarks None csrValue None ecvtenderYn True location 2477 locationName DMA Town Municipal Council Hoovinahadagali provisionalAmount 1768000.0 groupOverheadTotal 270604.75 fileNumber SFC-01-2024-25
tenderSubEstimateList	createdTs version createdDate modifiedDate workCategoryName subEstimateName estimateTotal itemList 1725437978000 1 None None Buildings Continued Rennovation Work of Old Taluk Office Building which Handed Over to Huvinahadagali TMC And Construction Of Toilet At Muslim Khabarstan in TMC Huvinahadagali Limits 1497395.23 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3916022 151064 None code01 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. I.No.13.32.4, Page No.122, Vol-2, 2023-24 CSR Mtr 584.85 584.85 150.0 False None None False None False 87727.5 0 3916023 151064 None code02 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. I.No.13.34, Page No.123, Vol-2, 2023-24 CSR Ltr 9.45 9.45 3000.0 False None None False None False 28350.0 0 3916024 151064 None code03 Providing and fixing Bib cock with wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class, I.No.14.55 a, Page No.139, Vol-2, 2023-24 CSR (Premium) Each 2547.3 2547.3 10.0 False None None False None False 25473.0 0 3916025 151064 None code04 Painting with oil type wood preservative of approved brand and manufacture: Old work (one coats) as per specifications and as per directions of Engineer in charge. I.No.8.62, Page No.51, Vol-2, 2023-24 CSR Sqm 32.55 32.55 298.92 False None None False None False 9729.846 0 3916026 151064 None code05 Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Prelaminated PVC C Channel of 5mm thick sheet & 30x50mm wide to form stiles & 5mm thick & 75mm wide Prelaminated PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet Prelaminated on either side fitted in the M.S. frame, Sealed to the stiles & rails with PVC Designer beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75mm Aluminium hinges.. I.No.12.55.1, Page No.104, Vol-2, 2023-24 CSR Sqm 2484.3 2484.3 23.625 False None None False None False 58691.5875 0 3916027 151064 None code06 Removing of existing old or broken wash basin / urinals/ Indian Water closet/ European Water closet and disposing it with all cost and conveyance labour for all items of work, HOM with all lead and lift, loading and unloading, transportation charges and all other incidental charges etc., complete as per specification and directions of the Engineer-in-charge of the work. I.No.20.123, Page No.209, Vol-2, 2023-24 CSR Each 423.15 423.15 6.0 False None None False None False 2538.9 0 3916028 151064 None code07 Providing & fixing White vitreous china water closet squatting pan (Indian type) along with "S" or "P" trap including dismantling of old WC seat and "S" or "P" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. Orissa pattern W.C Pan of size 580x440 mm. Common SR 2021-22 (V-2), I.No.20.44.2, Page No 202 Each 3724.35 3724.35 6.0 False None None False None False 22346.1 0 3916029 151064 None code08 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 550x400 mm with a pair of 15mm C.P. brass pillar taps, Common SR 2021-22 (V-2), I.No.14.17.3, Page No 132 Each 3009.3 3009.3 2.0 False None None False None False 6018.6 0 3916030 151064 None code09 Open Conduit System Supplying heavy gauge PVC conduit pipe 25 mm dia confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using inverted wood plugs in case of RCC ceiling and RCC wall stone structure or rawl plugs in case of brick walls and cement plastering damaged portion using heavy gauge saddles at an interval of 700mm using NF screws. (P.No.2, I.No.1. 1.3) PWD ELECTRICAL DSR. 2019-20 Mtr 96.6 96.6 680.0 False None None False None False 65688.0 0 3916031 151064 None code10 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. (P.No.5, I.No.2.3) PWD ELECTRICAL DSR. 2019-20 I. 1 sqmm. (Copper wire) Mtr 14.7 14.7 500.0 False None None False None False 7350.0 0 3916032 151064 None code11 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. (P.No.5, I.No.2.3) PWD ELECTRICAL DSR. 2019-20 I. 2.5 sqmm (Copper wire) Mtr 33.6 33.6 400.0 False None None False None False 13440.0 0 3916033 151064 None code12 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. (P.No.5, I.No.2.3) PWD ELECTRICAL DSR. 2019-20 I. 4 sqmm (Copper wire) Mtr 47.25 47.25 400.0 False None None False None False 18900.0 0 3916034 151064 None code13 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. (P.No.5, I.No.2.3) PWD ELECTRICAL DSR. 2019-20 I. 6 sqmm (Copper wire) Mtr 73.5 73.5 200.0 False None None False None False 14700.0 0 3916035 151064 None code14 Supplying and fixing PBBC bakelite straight or slant batten holder and wiring, within 60w/230 Volts lamps. Group 'A' (P.No.20, I.No.4.2) PWD ELECTRICAL DSR. 2019-20 Each 92.4 92.4 80.0 False None None False None False 7392.0 0 3916036 151064 None code15 Supply patty type fluorescent tube light fitting of 4'- 36/40 watts fluorescent tube fitting, made out of M.S sheet and stove enameled with low loss open construction copper wound ferromagnetic ballast, starter, locking type brass contact holders mounted on double fold type sheet base fully wired for use on 230 Volts A C Supply including 1No 4'-36/40Watts fluorescent tube. a.Group 'A' (P.No.20, I.No.4.6) PWD ELECTRICAL DSR. 2019-20 Each 702.45 702.45 3.0 False None None False None False 2107.35 0 3916037 151064 None code16 Supply and fixing polished wood board made of not less than 15mm thick plank on both sides with planks made out of not more than 2 pieces and fixing the same to the wall using tapered inverted wooden plugs screws etc. a) 20"x20"x2.5" (P.NO.44, I.No.6.6.6) PWD ELECTRICAL DSR. 2019-20 Each 317.1 317.1 66.0 False None None False None False 20928.6 0 3916038 151064 None code17 Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers etc., complete. 32Amps (P.No.44, I.No.6.7.2) PWD ELECTRICAL DSR. 2019-20 Each 189.0 189.0 14.0 False None None False None False 2646.0 0 3916039 151064 None code18 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve , indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required. e) 5-32Amps Group 'A' (P.No.54, I.No.6.16.4 & 6.16.1) PWD ELECTRICAL DSR. 2019-20 Each 2032.8 2032.8 22.0 False None None False None False 44721.6 0 3916040 151064 None code19 Supplying and fixing PVC/metal conduit Deep junction box. PWD ELECTRICAL DSR. 2019-20, I.No.1.5.3, Page No.3 Each 63.0 63.0 88.0 False None None False None False 5544.0 0 3916041 151064 None code20 Extra for supplying 4mm thick white plastic plate and covering for junction boxes of size ……mm conduit using necessary machine screws. PWD ELECTRICAL DSR. 2019-20, I.No.3.10, Page No.10 Each 11.55 11.55 88.0 False None None False None False 1016.4 0 3916042 151064 None code21 Mechanical Means: Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work. (Page no: 8 item no:1.12) V-1, 2023-24 Cum 99.75 99.75 59.94 False None None False None False 5979.015 0 3916043 151064 None code22 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse (Page no: 15 item no:2.1.3) V-1, 2023-24 Cum 6288.45 6288.45 6.66 False None None False None False 41881.077 0 3916044 151064 None code23 Providing Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent members whereever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. (The laps and wastages shall not be measured separately) (Page no: 18 item no:2.11a) V-1, 2023-24 Kg 93.93 93.93 1299.2 False None None False None False 122033.856 0 3916045 151064 None code24 Add 35% Additionalities for Formwork, Centering & Scaffolding Percentage on finished rate of concrete per m3 Cum 2323.7 2323.7 21.46 False None None False None False 49866.602 0 3916046 151064 None code25 Providing and laying in position Reinforced cement concrete for all Sub structures of building, rrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paidseparately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (Page no:17 item no:2.4.2) Cum 6639.15 6639.15 21.46 False None None False None False 142476.159 0 3916047 151064 None code26 Loosening, levelling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacted by rolling so as to achieve minimum dry density as given in Table 300-2 for embankment construction. PWD SR 2023-24 Vol:3 P.NO.17 I.No:3.7 Cum 110.25 110.25 54.9525 False None None False None False 6058.513125 0 3916048 151064 None code27 Removal of Unserviceable Soil with Disposal up to a suitable distance as directed by the Engineer in charge of work, PWD SR 2023-24 Vol:3 P.NO.17 I.No:3.1 Cum 89.25 89.25 54.9525 False None None False None False 4904.510625 0 3916049 151064 None code28 Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver/grader in sub-base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. PWD SR 2023-24 Vol:3 P.NO.26 I.No: 4.17 Cum 2686.95 2686.95 54.9525 False None None False None False 147654.619875 0 3916050 151064 None code29 Providing and constructing un-reinforced plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including construction joints, , primer, sealant , curing of concrete slabs for 14-days, and water finishing to lines and grade as per drawing and technical specification clause 1501 with all lead, lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments etc., complete. as per the directions of the Engineer-in-charge of the work. PWD SR 2023-24 Vol:3 P.NO.149 I.No: 16.28 Cum 7091.7 7091.7 54.9525 False None None False None False 389706.64425 0 3916051 151064 None code30 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. Common SR 2023-24 (V-1), I.No.1.9, Page No.7 Cum 279.3 279.3 7.872 False None None False None False 2198.6496 0 3916052 151064 None code31 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification (Common SR 2023-24, I.No.2.11a, P.No.18) Tonne 93929.85 93929.85 0.1449 False None None False None False 13610.435265 0 3916053 151064 None code32 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings / wooden frames with rawl plugs screws etc. Common SR 2023-24 (V-2), I.No.11.34B, Page No85 Kg 192.15 192.15 46.575 False None None False None False 8949.38625 0 3916054 151064 None code33 Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Common SR 2023-24 (V-2), I.No.11.34B, Page No85 Kg 142.8 142.8 400.0 False None None False None False 57120.0 0 3916055 151064 None code34 Providing & fixing corrugated G.S. sheet roofing including vertical /curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete as per design drawings (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required as per the direction of Engineer in charge. Common SR 2023-24 (V-2), I.No.11.34B, Page No85 Sqm 922.95 922.95 15.75 False None None False None False 14536.4625 0 3916056 151064 None code35 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using flats 30x6mm for diagonal braces and central cross piece including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. I.No.11.5.2, Page No.77, Vol-2, 2023-24 CSR Sqm 4454.1 4454.1 1.89 False None None False None False 8418.249 0 3916057 151064 None code36 Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Prelaminated PVC C Channel of 5mm thick sheet & 30x50mm wide to form stiles & 5mm thick & 75mm wide Prelaminated PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet Prelaminated on either side fitted in the M.S. frame, Sealed to the stiles & rails with PVC Designer beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75mm Aluminium hinges.. I.No.12.55.1, Page No.104, Vol-2, 2023-24 CSR Sqm 2484.3 2484.3 4.725 False None None False None False 11738.3175 0 3916058 151064 None code37 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. I.No.13.32.4, Page No.122, Vol-2, 2023-24 CSR Mtr 584.85 584.85 21.0 False None None False None False 12281.85 0 3916059 151064 None code38 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. I.No.13.34, Page No.123, Vol-2, 2023-24 CSR Ltr 9.45 9.45 500.0 False None None False None False 4725.0 0 3916060 151064 None code39 Providing and fixing PTMT bib cock of approved quality and colour. 15mm nominal bore, 86 mm long, weighing not less than 88 g, I.No.13.17.1, Page No.120, Vol-2, 2023-24 CSR Each 165.9 165.9 3.0 False None None False None False 497.7 0 3916061 151064 None code40 Providing & fixing White vitreous china water closet squatting pan (Indian type) along with "S" or "P" trap including dismantling of old WC seat and "S" or "P" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. Orissa pattern W.C Pan of size 580x440 mm. Common SR 2021-22 (V-2), I.No.20.44.2, Page No 202 Each 3724.35 3724.35 2.0 False None None False None False 7448.7 0
generalCriterionList	createdTs version createdDate modifiedDate criterionType description tenderEligibilityCriterionDocumentList 1725437979000 0 None None ELIGIBILITY Tenders from Joint ventures are not acceptable. None 1725437979000 0 None None ELIGIBILITY Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka None 1725437979000 0 None None ELIGIBILITY Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document. None 1725437979000 0 None None ELIGIBILITY It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission. None 1725437979000 0 None None ELIGIBILITY EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection. None 1725437997000 0 None None ELIGIBILITY Terms and Condition as per Bid Document None
preQualCriterionList	None
technicalCriterionList	createdTs version createdDate modifiedDate description criterionCategoryText criterionTypeOthersValue tenderTechnicalCriterionDocumentList None None None None To qualify for award of this contract each tenderer in its name should have in the last five years in any one year Satisfactorily completed as prime contractor at least one similar work such as of value not less than Rs 8.84 Lakhs Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None To qualify for award of this contract each tenderer in its name should have in the last five years i.e.,2019-20 to 2023-24 achieved in at least two financial years a average minimum financial turnover of Rs 17.68 Lakhs Financial Status None createdTs version createdDate modifiedDate documentName None None None None Audited CA Certificate of Annual Turnover None None None None Liquid assets and or availability of credit facilities of no less than Rs 5.30 Lakhs Credit lines/ letters of credit/ certificates from banks for meeting the fund requirement etc. (Banker Certificate is in prescribed format provided in bid document) Financial Status None createdTs version createdDate modifiedDate documentName None None None None Line of Credit None None None None IT Returns for the last five years 2019-20 to 2023-24 Financial Status None createdTs version createdDate modifiedDate documentName None None None None ITR Filed Copy (Mentioning PAN) None None None None Valid Pwd Contractor Registration Certificate Others Valid Pwd Contractor Registration Certificate createdTs version createdDate modifiedDate documentName None None None None PWD Registration Certificate (Class I/II/III/IV) None None None None GST Registration Certificate Others GST Registration Certificate createdTs version createdDate modifiedDate documentName None None None None GST Registration None None None None Pan Card Others Pan Card createdTs version createdDate modifiedDate documentName None None None None Others -- Pan Card
tenderCriterionDocumentList	documentName optional documentTypeText Upload all other documents as per Bid Document and Eportal conditions True Technical Bid
tenderWorkLocationList
tenderAddress	None
tenderRecallDTO	None