createdTsNone
versionNone
createdDateNone
modifiedDateNone
noticeInvitingTenderDTO
createdTs1725532906501
version2
createdDateNone
modifiedDateNone
tenderTypeRFQ
evaluationTypeONE_COVER
evaluationTypeTextOne Cover
invitingStrategyRESERVED
invitingStrategyTextReserved
taxTypeINCLUSIVE_TAX
tenderFee500.00
emd5650.00
bidValueTypeITEM_WISE
bidValueTypeTextItem wise
tenderReceiptClose21-09-2024 17:00:00
tenderQueryClose20-09-2024 17:30:00
technicalBidOpenNone
publishedDate06-09-2024 09:07:02
publishedByPostTMC_CO_BOM
publishedByUserKPE10122 - RAJENDRA B L
bidValidityPeriod90
noOfCalls1
preBidMeetingDateNone
preBidMeetingYnFalse
preQualificationBidOpenNone
denominationTypeRUPEES
denominationTypeTextRupees
retenderedYnNone
percentageRateTypeTextNone
contactPersonPrasanna S
splitEmdRequiredYnFalse
emdBankGuaranteeNone
emdCashNone
bgValidityPeriodNone
hideWeightageNone
multipleCurrencySelectionAllowedYnFalse
isTechWeightageAllowedNone
highestBidderSelectionFalse
isVariableEmdAllowedNone
qcbsTenderYnNone
itemwiseEmdRequiredYnNone
sampleSubmissionDateNone
officeNumber08027834655
mobileNumberNone
tenderSupplierListNone
tenderSchedule
createdTs1725532906536
version4
createdDateNone
modifiedDateNone
tenderNumberDMA/2024-25/BD/WORK_INDENT29206
titleConstruction of Toilet and ramp for physically challenged people in Kithiganahalli Govt school in ward no 13 of TMC Bommasandra TMC limits
descriptionConstruction of Toilet and ramp for physically challenged people in Kithiganahalli Govt school in ward no 13 of TMC Bommasandra TMC limits
categoryWORKS
categoryTextWorks
ecv450500.00
deptNameDirectorate of Municipal Administration
statusPUBLISHED
statusTextPublished
remarksNone
csrValueNone
ecvtenderYnFalse
location2268
locationNameDMA Town Municipal Council Bommasandra
provisionalAmount450500.0
groupOverheadTotal69802.52
fileNumber06/17/2024-25
tenderSubEstimateList
createdTsversioncreatedDatemodifiedDateworkCategoryNamesubEstimateNameestimateTotalitemList
17255329070000NoneNoneBuildingsConstruction of Toilet and ramp for physically challenged people in Kithiganahalli Govt school in ward no 13 of TMC Bommasandra TMC limits380697.48
idtenderSubEstimateIdcategoryNameitemCodedescriptionuomNamebaseRatefinalRatequantitymodifyQuantityYnminQuantitymaxQuantitybuyBackYnbuyBackValuehideYnnetAmounttaxCount
3929445151613None001Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work-In all kinds of soils Depth upto 3 m Page No. 8,Sl. No.1.14.1 VOL-1 a.In soft soil Depth exceeding 1.5 m, but not exceeding 3 m/Vol.1/pg no.8/Sl.no.1.14.1Cum105.06105.0620.98FalseNoneNoneFalseNoneFalse2204.15880
3929446151613None002Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates (Below Grade slab, Below Footing, & Flagging and all other places) Vol-1 15/2.1.4Cum6403.516403.513.45FalseNoneNoneFalseNoneFalse22092.10950
3929447151613None003Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) vol 2. Pg No 9/5.4Cum6580.676580.673.84FalseNoneNoneFalseNoneFalse25269.77280
3929448151613None004Providing & laying in position RCC for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) For Footing, Retaining wall Base, Column, Plinth Beam, Retaining wall, Verticle fins with M-25 (Below Ground level) Vol-1 15/2.2.3. Footing Concrete (M25)Cum6526.086526.080.85FalseNoneNoneFalseNoneFalse5547.1680
3929449151613None005As per recommendations of Technical working group, rates for formwork shall be added on percentage basis to the finished concrete item rate. (as per specification. PWD SR 2023-24Vol:1 P.NO.111 I.No: 2)Cum3263.043263.040.85FalseNoneNoneFalseNoneFalse2773.5840
3929450151613None006Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggre gates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) Vol-1 17/2.5.1Cum6828.96828.90.78FalseNoneNoneFalseNoneFalse5326.5420
3929451151613None007As per recommendations of Technical working group, rates for formwork shall be added on percentage basis to the finished concrete item rate. (as per specification. PWD SR 2023-24Vol:1 P.NO.112 I.No: 14)Cum4097.344097.340.78FalseNoneNoneFalseNoneFalse3195.92520
3929452151613None008Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggre gates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately)(Below Ground level) Vol-1 17/2.5.1.Cum6828.96828.92.11FalseNoneNoneFalseNoneFalse14408.9790
3929453151613None009As per recommendations of Technical working group, rates for formwork shall be added on percentage basis to the finished concrete item rate. (as per specification. PWD SR 2023-24Vol:1 P.NO.112 I.No: 15)Cum3414.453414.452.11FalseNoneNoneFalseNoneFalse7204.48950
3929454151613None010Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification(P.No. 18, It.No. 2.11a of CSR 2023-24 Volume 1)Tonne92140.7192140.710.36FalseNoneNoneFalseNoneFalse33170.65560
3929455151613None011Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work.(Page No.13, Item No. 6.7, Common SR 2023-24 volume 2)Cum8457.338457.336.63FalseNoneNoneFalseNoneFalse56072.09790
3929456151613None012Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1cement:5coarsesand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1cement :3 coarses and)finished rough with sponge to brick masonry including rounding off corners wherever required smooth rendering,providing and removing scaffolding,including cost of materials,labour,curing complete as per specifications and as per directions of Engineer-in-charge.PWD 2023-24 common SR Page No. 42 Item No.8.9 Volume no IISqm396.55396.5576.92FalseNoneNoneFalseNoneFalse30502.6260
3929457151613None013Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Vol-2 45/8.25Sqm141.11141.1176.92FalseNoneNoneFalseNoneFalse10854.18120
3929458151613None014Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.Vol-2 48/8.40Sqm118.45118.456.12FalseNoneNoneFalseNoneFalse724.9140
3929459151613None015Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm Vol-2 60/9.12.2Sqm1179.351179.352.7FalseNoneNoneFalseNoneFalse3184.2450
3929460151613None016Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. Vol-2 65/9.38Sqm1433.761433.766.48FalseNoneNoneFalseNoneFalse9290.76480
3929461151613None017Providing Mathi/Nandi wood frames of doors, windows, clerestory windows,ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and sideclamps),but including cost of materials,labour,usage charges complete as per specifications.PWD 2023-24 common SR Page No.99 Item No.12.12Cum127928.06127928.060.08FalseNoneNoneFalseNoneFalse10234.24480
3929462151613None018Providing and fixing in position fully panelled Honne wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. ( excluding cost of fixtures ) PWD 2021-22 common SR Page No.100 Item No.12.15Sqm7667.327667.322.52FalseNoneNoneFalseNoneFalse19321.64640
3929463151613None019Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&Ps shall not be made) PWD 2021-22 common SR Page No.110 Item No.12.85, Volume no IISqm5870.575870.570.45FalseNoneNoneFalseNoneFalse2641.75650
3929464151613None020Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. Vol-1 pg no.7 item no 1.9Cum273.98273.981.44FalseNoneNoneFalseNoneFalse394.53120
3929465151613None021Providing & laying in position RCC for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) For Footing, Retaining wall Base, Column, Plinth Beam, Retaining wall, Verticle fins with M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (Below Ground level) Vol-1 15/2.2.1.1.Cum6475.616475.611.01FalseNoneNoneFalseNoneFalse6540.36610
3929466151613None022Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.Vol-2 pg no.83-84 item no 11.28Kg581.95581.95103.36FalseNoneNoneFalseNoneFalse60150.3520
3929467151613None023Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required. W.C. pan with ISI marked white solid plastic seat and lid (Vol-2 pg no.123 item no 14.3.1)Each6156.316156.311.0FalseNoneNoneFalseNoneFalse6156.310
3929468151613None024Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank Vol-2 pg no.123 item no 13.34Ltr9.279.271000.0FalseNoneNoneFalseNoneFalse9270.00
3929469151613None025Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: Stainless Steel AISI-304(18/8) Wash basin 530x345 mm with single 15 mm C.P. brass pillar tap (P.No. 125, It.No. 14.7.11 of CSR 2023-24 Volume 2)Each4259.054259.051.0FalseNoneNoneFalseNoneFalse4259.050
3929470151613None026Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for:PVC pipes 160mm dia., 6 kg/sqcm & class 3 (P.No. 112, It.No. 10.1.9 of CSR 2023-24 Volume 5)Mtr636.54636.5412.0FalseNoneNoneFalseNoneFalse7638.480
3929471151613None027Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for: PVC pipes 32mm dia, 10 kg/sqcm & class 5(P.No. 118, It.No. 10.1.2 of CSR 2023-24 Volume 5)Mtr69.0169.0115.0FalseNoneNoneFalseNoneFalse1035.150
3929472151613None028Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover.(P.No. 191, It.No. 16.8 of CSR 2023-24 Volume 5)Each4934.734934.731.0FalseNoneNoneFalseNoneFalse4934.730
3929473151613None029Supplying heavy guage 19/20 mm dia 2 mm thick PVC conduit pipe confirming to IS 2509 with suitable size bends, junction boxes ,adhesive paste etc., and fixing using inverted wood plugs in case of RCC celing and RCC wall stone structure or rawl plugs in case of brick walls and cement plastering damaged portion using heavy guage saddles at an interval of 700 mm using NF screws.( Item no 1.1.1 of page no 2 of pwd SR 2019/20 )Mtr51.551.510.0FalseNoneNoneFalseNoneFalse515.00
3929474151613None030Supplying heavy guage 25 mm dia 2 mm thick PVC conduit pipe confirming to IS 2509 with suitable size bends, junction boxes ,adhesive paste etc., and fixing using inverted wood plugs in case of RCC celing and RCC wall stone structure or rawl plugs in case of brick walls and cement plastering damaged portion using heavy guage saddles at an interval of 700 mm using NF screws.(Item no 1.1.2 of page no 2 of pwd SR 2019/20)Mtr66.9566.9510.0FalseNoneNoneFalseNoneFalse669.50
3929475151613None031Supplying and fixing 19/20 mm PVC/metal conduit Deep junction box ( Item no 1.5.1 of page no 3 of pwd SR 2019/20)Each44.2944.292.0FalseNoneNoneFalseNoneFalse88.580
3929476151613None032Supplying and fixing 25 mm PVC/metal conduit Deep junction box (Item no 1.5.1 of page no 3 of pwd SR 2019/20)Each48.4148.412.0FalseNoneNoneFalseNoneFalse96.820
3929477151613None033Wiring for lighting/ power circuit using 1 sqmm PVC insulated 1100v grade, multistrand Copper conductor single core cable in open or concealed system of wiring.with specified IS-694 confirming to latest amendments (Item no 2.3.1 of page no 5 of pwd SR 2019/20.)Mtr14.4214.4215.0FalseNoneNoneFalseNoneFalse216.30
3929478151613None034Wiring for lighting/ power circuit using 1.5 sqmm PVC insulated 1100v grade, multistrand Copper conductor single core cable in open or concealed system of wiring.with specified IS-694 confirming to latest amendments (Item no 2.3.2 of page no 5 of pwd SR 2019/20.)Mtr21.1221.1225.0FalseNoneNoneFalseNoneFalse528.00
3929479151613None035Wiring for lighting/ power circuit using 2.5 sqmm PVC insulated 1100v grade, multistrand Copper conductor single core cable in open or concealed system of wiring.with specified IS-694 confirming to latest amendments (Item no 2.3.3 of page no 5 of pwd SR 2019/20)Mtr32.9632.9620.0FalseNoneNoneFalseNoneFalse659.20
3929480151613None036Wiring for lighting/ power circuit using 4sqmm PVC insulated 110v grade, multistrand Copper conductor single core cable in open or concealed system of wiring.with specified IS-694 confirming to latest amendments (Item no 2.3.4of page no 5 of pwd SR 2019/20 )Mtr46.3546.3520.0FalseNoneNoneFalseNoneFalse927.00
3929481151613None037Supplying and fixing 6 way surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/NF screws etc., complete. (Item no 3.4.3 of page no 9 of pwd SR 2019/20 )Each128.75128.751.0FalseNoneNoneFalseNoneFalse128.750
3929482151613None038Supplying and fixing 8 way surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/NF screws etc., complete. (Item no 3.4.4 of page no 9 of pwd SR 2019/20)Each149.35149.351.0FalseNoneNoneFalseNoneFalse149.350
3929483151613None039Supplying and fixing of 6 amps one way modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. (Item no 3.6.1of page no10 of pwd SR 2019/20.)Each72.172.12.0FalseNoneNoneFalseNoneFalse144.20
3929484151613None040Supplying and fixing of 6 amps 3 way socket & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. (Item no 3.6.3of page no 10 of pwd SR 2019/20.)Each108.15108.151.0FalseNoneNoneFalseNoneFalse108.150
3929485151613None041Supplying and fixing/ replacing of 16/6Amps Combined plug & socket with contorl switch on existing switch board. (Item no 3.14.14 of page no 11 ofpwd SR 2019/20.Each267.8267.81.0FalseNoneNoneFalseNoneFalse267.80
3929486151613None042Providing and fixing 1.5 HP Mono block pump setEach11800.011800.01.0FalseNoneNoneFalseNoneFalse11800.00
generalCriterionList
createdTsversioncreatedDatemodifiedDatecriterionTypedescriptiontenderEligibilityCriterionDocumentList
17255329070000NoneNoneELIGIBILITYTenders from Joint ventures are not acceptable.None
17255329070000NoneNoneELIGIBILITYBidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka None
17255329070001NoneNoneELIGIBILITYBidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste /other reserved category as prescribed in the tender document.None
17255329070000NoneNoneELIGIBILITYIt shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.None
17255329070000NoneNoneELIGIBILITYEMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.None
17255329440000NoneNoneELIGIBILITYConditional tenders will not be accepted.None
17255329480000NoneNoneELIGIBILITYTenderers are required to read the Bid Documents carefully before submission of their bid.None
17255329530000NoneNoneELIGIBILITYAny discrepancies observed in the documents uploaded by the tenderer the tender shall liable to rejected.None
17255329610000NoneNoneELIGIBILITYRoyalty on construction materials and other taxes will be deducted as per prevailing Govt., orders as may be modified from time to time.None
17255329690000NoneNoneELIGIBILITYAs per Karnataka State Government order No.LD/300/LET/2006 Bangalore Dated 01.01.2007 and Government Letter No.PW/134/BMS/2007 Dated 27-07-2007, a sum amounting to 1%of the bill amount will be deducted towards Construction Labour Welfare fund.None
17255329740000NoneNoneELIGIBILITYThe Tenderer shall scan Original Workdone certificates / Turnover Statements and any other documents specified by the employer and attach the scanned file to the Bid. The Original Documents shall be produced for physical verification within one week from the date of Technical bid opening.None
17255329790000NoneNoneELIGIBILITYThe Employer reserves the right to reject any or all Tenders without assigning any reason or what so ever.None
17255329840000NoneNoneELIGIBILITYThe earnest money deposit will be forfeited if the documents submitted by the tenderer found to be misleading/forged or fake .None
17255329890000NoneNoneELIGIBILITYFinancial turnover of previous years shall be given a weightage of 10% per year to bring them to the price level of the 2023-24None
17255329940000NoneNoneELIGIBILITYAll the Work done certificate uploaded should include E-procurement indent number.None
17255329980000NoneNoneELIGIBILITYTurnover certificate from CA with valid UDIN No. to be furnished along with necessary documents.None
17255330040000NoneNoneELIGIBILITYGST shall be paid to the tendered amount separately and payments are made as per the condition number 6 of Govt order FD/417/EXP-12/2024 dated 09-08-2024.None
preQualCriterionListNone
technicalCriterionListNone
tenderCriterionDocumentList
documentNameoptionaldocumentTypeText
PWD CIVIL LICENCE CLASS 3 & above obtained from competent authority.TrueTechnical Bid
Annual Turnover Certificate for 5 years certified by chartered accountant.TrueTechnical Bid
Certificate of Any work done obtained from competent authority.TrueTechnical Bid
Certificate of ongoing / works in hand obtained from competent authorityTrueTechnical Bid
Caste certificate SC obtained from competent authorityTrueTechnical Bid
GST & IT returns certificateTrueTechnical Bid
Un Conditional Line of credit from the Nationalized banks.TrueTechnical Bid
Domicile certificate obtained from competent authority.TrueTechnical Bid
tenderWorkLocationList
tenderAddressNone
tenderRecallDTONone