| 3920972 | 151236 | None | Code3.1Vol.3 | Removal of Unserviceable Soil with Disposal upto a suitable distance as directed by the Engineer incharge of work | Cum | 89.25 | 89.25 | 32130.0 | False | None | None | False | None | False | 2867602.5 | 0 |
| 3920973 | 151236 | None | Code1.12Vol.1 | Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work. In all kinds of soils upto 300 mm depth | Cum | 99.75 | 99.75 | 2565.0 | False | None | None | False | None | False | 255858.75 | 0 |
| 3920974 | 151236 | None | Code1.14.1Vol.1 | Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. In all kinds of soils Depth upto 3 m | Cum | 107.1 | 107.1 | 643.38 | False | None | None | False | None | False | 68905.998 | 0 |
| 3920975 | 151236 | None | Code1.8Vol.1 | Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cos of labour,rolling,water,allmaterials,usage & all other appurtenaces required to complete the work. | Cum | 497.7 | 497.7 | 3496.86 | False | None | None | False | None | False | 1740387.222 | 0 |
| 3920976 | 151236 | None | Code37.63.2Vol.Approved Rate | Providing two bulb underreemed pile foundation upto maximum 5m depth including hire charges of machineries digging the pile holes, labour charges and laying 20mm and down size jelly RCC M30 keeping the reinforcement edge cutting etc., complete as per specifications. - - 30 cm dia | m | 1557.15 | 1557.15 | 1440.0 | False | None | None | False | None | False | 2242296.0 | 0 |
| 3920977 | 151236 | None | Code4.1Vol.2 | Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 l/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications. | Sqm | 123.9 | 123.9 | 4500.0 | False | None | None | False | None | False | 557550.0 | 0 |
| 3920978 | 151236 | None | Code4.1(V)Vol.3 | Construction of Granular Sub-Base of required grading as per design mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401. For Grading -V Material | Cum | 2611.35 | 2611.35 | 450.0 | False | None | None | False | None | False | 1175107.5 | 0 |
| 3920979 | 151236 | None | Code4.17Vol.3 | KSRRB M400- Wet Mix Macadam KSRRB M400-17. Providing, laying, spreading and compacting crushed stone aggregates of granite / trap / basalt to wet mix macadam specifications including pre mixing the material with water at OMC in mechanical mix plant carriage of mixed method of tipper to site, laying in uniform layers with paver in sub-base/base course on well prepared surface and compacting with vibratory roller to achieve the desired density complete as per specifications. MORTH Specification No. 406 | Cum | 2686.95 | 2686.95 | 675.0 | False | None | None | False | None | False | 1813691.25 | 0 |
| 3920980 | 151236 | None | Code2.1.2Vol.1 | Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:4:8 Using 40 mm nominal size graded crushed coarse aggregates | Cum | 5947.2 | 5947.2 | 119.5 | False | None | None | False | None | False | 710690.4 | 0 |
| 3920981 | 151236 | None | Code2.1.6Vol.1 | Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:2:4 Using 20 mm nominal size graded crushed coarse aggregates | Cum | 6555.15 | 6555.15 | 25.25 | False | None | None | False | None | False | 165517.5375 | 0 |
| 3920982 | 151236 | None | Code2.2.3Vol.1 | Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates | Cum | 6652.8 | 6652.8 | 365.91 | False | None | None | False | None | False | 2434326.048 | 0 |
| 3920983 | 151236 | None | Code2.5.2Vol.1 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates | Cum | 7185.15 | 7185.15 | 302.07 | False | None | None | False | None | False | 2170418.2605 | 0 |
| 3920984 | 151236 | None | CodeAddendum-1Vol.1 | Addendum I Percentage Additionalities for Formwork, Centering & Scaffolding. Foundation upto Plinth. a. Isolated- 8% on finished rate of concrete per m3 | Cum | 532.22 | 532.22 | 226.35 | False | None | None | False | None | False | 120467.997 | 0 |
| 3920985 | 151236 | None | CodeAddendum-1Vol.1 | Addendum I Percentage Additionalities for Formwork, Centering & Scaffolding. Foundation upto Plinth. Plinth Beams of Buildings- 50% on finished rate of concrete per m3 | Cum | 3326.4 | 3326.4 | 124.78 | False | None | None | False | None | False | 415068.192 | 0 |
| 3920986 | 151236 | None | CodeAddendum-1Vol.1 | Addendum I Percentage Additionalities for Formwork, Centering & Scaffolding. Foundation upto Plinth. RCC Columns / Shaft (Slip Centering- 70% on finished rate of concrete per m3 | Cum | 5029.61 | 5029.61 | 107.68 | False | None | None | False | None | False | 541588.4048 | 0 |
| 3920987 | 151236 | None | CodeAddendum-1Vol.1 | Addendum I Percentage Additionalities for Formwork, Centering & Scaffolding. RCC Beams, Lintels & Troughs of Aqueducts- 60% on finished rate of concrete per m3 | Cum | 4311.09 | 4311.09 | 192.14 | False | None | None | False | None | False | 828332.8326 | 0 |
| 3920988 | 151236 | None | CodeAddendum-1Vol.1 | Addendum I Percentage Additionalities for Formwork, Centering & Scaffolding. Earth retaining structures- 10% on finished rate of concrete per m3 | Cum | 665.28 | 665.28 | 11.49 | False | None | None | False | None | False | 7644.0672 | 0 |
| 3920989 | 151236 | None | CodeAddendum-1Vol.1 | Addendum I Percentage Additionalities for Formwork, Centering & Scaffolding. Earth retaining structures- 10% on finished rate of concrete per m3 | Cum | 665.28 | 665.28 | 3.03 | False | None | None | False | None | False | 2015.7984 | 0 |
| 3920990 | 151236 | None | Code2.11aVol.1 | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. a. Buildings | Tonne | 93929.85 | 93929.85 | 167.12 | False | None | None | False | None | False | 15697556.532 | 0 |
| 3920991 | 151236 | None | Code6.32Vol.2 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. | Sqm | 1375.5 | 1375.5 | 1677.26 | False | None | None | False | None | False | 2307071.13 | 0 |
| 3920992 | 151236 | None | Code8.6.1Vol.2 | Providing 12 mm cement plaster with Cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer in-charge | Sqm | 339.15 | 339.15 | 2975.95 | False | None | None | False | None | False | 1009293.4425 | 0 |
| 3920993 | 151236 | None | Code8.8Vol.2 | Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 389.55 | 389.55 | 1253.5 | False | None | None | False | None | False | 488300.925 | 0 |
| 3920994 | 151236 | None | Code15.16Vol.2 | Providing and Applying Acrylic Co Polymer single component specially designed waterproof protective coating that prevents damp patches on walls without any dilution at rate of 0.25kg/m2 in 2 coats to achieve total dry film thickness of 170 microns DFT. The material having followed technical properties: crack bridging ability up to 1mm as per EN 1062, Tensile strength 2N/mm2 as per ASTM D 412, adhesion strength 1.5N/ mm2 as per ASTM D4541. The finished cost including surface preparation completely as per specification | Sqm | 319.2 | 319.2 | 2975.95 | False | None | None | False | None | False | 949923.24 | 0 |
| 3920995 | 151236 | None | Code8.32Vol.2 | Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 g/L and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 L/ 10 m². Over and including priming coat of exterior primer applied @ 0.90 L/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 163.8 | 163.8 | 2975.95 | False | None | None | False | None | False | 487460.61 | 0 |
| 3920996 | 151236 | None | Code8.9Vol.2 | Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge | Sqm | 404.25 | 404.25 | 1253.5 | False | None | None | False | None | False | 506727.375 | 0 |
| 3920997 | 151236 | None | Code15.23Vol.2 | Providing & Applying Crystalline waterproofing slurry coat RCC structure like Retaining wall, Underground tank. The material having chemical resistance properties, seals shrinkage cracks up to 0.4 mm width, capable of preventing water dampness & seepages, Water permeabilit is Nil confirms to BS EN 12390 Part 8: 2000. Powder to water mixed at a ratio (5:2) 5 parts powder and 2 parts water, applied @ 1.5kg/m2 in 2 coats to achieve 1.0mm DFT on a cleaned surface free from all loose materials etc., complete. The finished cost to include surface preparation completely as per specification | Sqm | 2572.5 | 2572.5 | 62.86 | False | None | None | False | None | False | 161707.35 | 0 |
| 3920998 | 151236 | None | Code6.6Vol.3 | Plain Cement Pavement Quality M30 grade Concrete (RMC) with OPC & GGBS laid without Paver. Construction of un-reinforced plain cement concrete pavement using RMC M-30 grade with OPC @ 270 kg/m3 and GGBS@ 90 kg/m3 (75:25 proportion) as per approved mix design procedure and thickness as per design, over a prepared sub base. The superplastisiser confirming to IS 9103-1999 Reaffirmed-2008 ,Coarse aggregates and Fine aggregate confirming to IS:383-2016, transported to site, laid in approved fixed side form work (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the form work). Spreading the concrete with shovels, rackers and compacted using needle, suitable plate vibrator and finished in a continuous operation including provision of separation membrane and Hessian cloth finishing to lines and grades complete including cost of all materials, labour, all lead & lift, loading charges as per specification & direction of Engineer - incharge of the work. (Groove cutting shall be paid seperately. | Cum | 7112.7 | 7112.7 | 865.02 | False | None | None | False | None | False | 6152627.754 | 0 |
| 3920999 | 151236 | None | Code8.41Vol.2 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 175.35 | 175.35 | 445.6 | False | None | None | False | None | False | 78135.96 | 0 |
| 3921000 | 151236 | None | Code9.21.2Vol.2 | Providing and laying Vitrified tiles with thickness 9-10 mm in floor with different sizes with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). Size of Tile 600x600 mm | Sqm | 1299.9 | 1299.9 | 101.25 | False | None | None | False | None | False | 131614.875 | 0 |
| 3921001 | 151236 | None | Code10.14Vol.2 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg/m2, including pointing in white cement mixed with pigment of matching shade complete. | Sqm | 1161.3 | 1161.3 | 59.68 | False | None | None | False | None | False | 69306.384 | 0 |
| 3921002 | 151236 | None | Code12.85Vol.2 | Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&Ps shall not be made) | Sqm | 6004.95 | 6004.95 | 321.3 | False | None | None | False | None | False | 1929390.435 | 0 |
| 3921003 | 151236 | None | Code9.20.2Vol.2 | Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge. Size of Tile 600x600 mm | Sqm | 219.45 | 219.45 | 101.25 | False | None | None | False | None | False | 22219.3125 | 0 |
| 3921004 | 151236 | None | Code10.8Vol.2 | Providing and fixing granite stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal parti tions by cutting a chase of appropriate width with chase cutter and embed ding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in- charge and finished smooth. | Sqm | 2928.45 | 2928.45 | 4.32 | False | None | None | False | None | False | 12650.904 | 0 |
| 3921005 | 151236 | None | CodeApproved rate | Providing and fixing self-supported, ribbed, high quality, high grade (D:350 MPA Yst Min ), pre- painted Galvalume steel roof sheet as per ASTMA 792 m, coated with bare Galvalume coating AZ 150, @ 150 gms/Smtr 55%AL,45%Zn) by hot dip process , of total coated thickness as specified for different spans with a tolerance of +/- 0.02 mm, according to technical specification confirming to A 792, with NCCA ll-1, or ECCA T4 Pencil hardness HB, NCCA standard T-Bend test. The roof should be fastened to the gutter beam, on the external sloping side, at an interval of 51mm Centre to Centre, to a depth of 65 mm with GI anchor bolts and neoprene washers & subjecting the gutter beam to Schmidt, Hammer test to ensure the anchorage of the anchor bolts. The self-supported roofing system should be designed as per ASCE 7-20 IBC2002. ASTM standards. The analysis shall be carried out for span and center arch rise after considering the live load, wind load (As per IS 875 part-3), Earthquake load (as per IS 1893) and dead loads. The roof panel formation shall be done at site as per the required span, length and curvature using hydraulich profile machine such as MIC or any eqivalent to give the trapazodal shape in required curvature. The design should also comply with any other technical requirements such as 24" wind operated turbo ventilators of 0.60 mts. dia and suitable quantities of specified width and length skylights of size 4.26 x 0.60 mts. fixed one in each row @ 10.00 Mtr C/C along the length & hangers for electrical fixtures as per the requirements including cost of all materials &labour for erection, all lead and lift, loading and unloading, HOM of machineries etc., complete as per the standard detailed technical specification, design and directions of the engineer in charge of the work. Span : Above 30 Meters upto 32 Meters, Material Specification: Colour Coated Imported Galvalume Sheet, weighing 20.10kg/sqm BMT: 1.60 MM, APT (After paint thickness): 1.67 MM, tolerance +/- 0.02mm | Sqm | 3177.97 | 3177.97 | 5085.3 | False | None | None | False | None | False | 16160930.841 | 0 |
| 3921006 | 151236 | None | CodeApproved rate | Providing and fixing self-supported, ribbed, high quality, high grade (D:350 MPA Yst Min ), pre- painted Galvalume steel roof sheet as per ASTMA 792 m, coated with bare Galvalume coating AZ 150, @ 150 gms/Smtr 55%AL,45%Zn) by hot dip process , of total coated thickness as specified for different spans with a tolerance of +/- 0.02 mm, according to technical specification confirming to A 792, with NCCA ll-1, or ECCA T4 Pencil hardness HB, NCCA standard T-Bend test. The roof should be fastened to the gutter beam, on the external sloping side, at an interval of 51mm Centre to Centre, to a depth of 65 mm with GI anchor bolts and neoprene washers & subjecting the gutter beam to Schmidt, Hammer test to ensure the anchorage of the anchor bolts. The self-supported roofing system should be designed as per ASCE 7-20 IBC2002. ASTM standards. The analysis shall be carried out for span and center arch rise after considering the live load, wind load (As per IS 875 part-3), Earthquake load (as per IS 1893) and dead loads. The roof panel formation shall be done at site as per the required span, length and curvature using hydraulich profile machine such as MIC or any eqivalent to give the trapazodal shape in required curvature. The design should also comply with any other technical requirements such as 24" wind operated turbo ventilators of 0.60 mts. dia and suitable quantities of specified width and length skylights of size 4.26 x 0.60 mts. fixed one in each row @ 10.00 Mtr C/C along the length & hangers for electrical fixtures as per the requirements including cost of all materials &labour for erection, all lead and lift, loading and unloading, HOM of machineries etc., complete as per the standard detailed technical specification, design and directions of the engineer in charge of the work. Cladding:
Laying of Gable Wall Cladding with Pre-Painted
Galvalume steel sheet of required thickness
o Base Metal Thickness ‘BMT’: 0.80 mm (+/-0.02mm)
o After Paint Thickness ‘APT”: 0.85 mm (+/-0.02mm)
o Cladding Panels should be of 310mm formed using coils of width 605mm (tolerance 10mm) | Sqm | 3050.85 | 3050.85 | 142.38 | False | None | None | False | None | False | 434380.023 | 0 |
| 3921007 | 151236 | None | Code11.2Vol.2 | Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer in Charge. | Kgs | 118.65 | 118.65 | 17520.0 | False | None | None | False | None | False | 2078748.0 | 0 |
| 3921008 | 151236 | None | Code7.38Vol.2 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 g/m as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 m or as desired by Engineer in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters a trusses and including cutting to size and shape wherever required. | Sqm | 596.4 | 596.4 | 285.6 | False | None | None | False | None | False | 170331.84 | 0 |
| 3921009 | 151236 | None | Code7.68Vol.2 | Providing and fixing roofing consist of 0.8 mm thick Galvanized steel Deck Sheet confirming to IS 277:1992 used as permanent shuttering over which MS wire mesh 3mm laid at 100x100 mm grid including edge trim covered with concrete. This metal deck will be supported on structural steel beam with shear studs. (Structural steel like Beam, column, joists etc. & concrete of different grade as per design will be paid separately). | Sqm | 1221.15 | 1221.15 | 18.0 | False | None | None | False | None | False | 21980.7 | 0 |
| 3921010 | 151236 | None | Code11.6.1Vol.2 | Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 80x1.25 mm M.S. laths with 1.25 mm thick top cover including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. | Sqm | 2764.65 | 2764.65 | 80.0 | False | None | None | False | None | False | 221172.0 | 0 |
| 3921011 | 151236 | None | Code11.7Vol.2 | Providing and fixing ball bearing for rolling shutters including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge | No | 423.15 | 423.15 | 18.0 | False | None | None | False | None | False | 7616.7 | 0 |
| 3921012 | 151236 | None | Code11.8.2Vol.2 | Extra for providing mechanical device chain and crank operation for operating rolling shutters: Exceeding 16.80 m² in area including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. | Sqm | 1050.0 | 1050.0 | 80.0 | False | None | None | False | None | False | 84000.0 | 0 |
| 3921013 | 151236 | None | Code12.96Vol.2 | Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross- section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame | m | 675.15 | 675.15 | 12.0 | False | None | None | False | None | False | 8101.8 | 0 |
| 3921014 | 151236 | None | Code12.97.1Vol.2 | Providing and fixing to existing door frames Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames. 30 mm thickness | Sqm | 3364.2 | 3364.2 | 3.78 | False | None | None | False | None | False | 12716.676 | 0 |
| 3921015 | 151236 | None | Code12.54Vol.2 | Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long brackets of 15x15mm M.S Square tube, the entire door frame to be reinforced with 19x19mm M.S Square tube of 19 gauge. The door frame to be fixed to the wall using M.S. Screws of 65/80mm size complete as per manufacturers specification & direction of Engineer-in-charge. | m | 333.9 | 333.9 | 17.1 | False | None | None | False | None | False | 5709.69 | 0 |
| 3921016 | 151236 | None | Code12.55.1Vol.2 | Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Prelaminated PVC C Channel of 5mm thick sheet & 30x50mm wide to form stiles & 5mm thick & 75mm wide Prelaminated PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet Prelaminated on either side fitted in the M.S. frame, Sealed to the stiles & rails with PVC Designer beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75mm Aluminium hinges -do- with both side prelam | Sqm | 2484.3 | 2484.3 | 4.73 | False | None | None | False | None | False | 11750.739 | 0 |
| 3921017 | 151236 | None | Code13.48Vol.2 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expansion, (1) Single socketed pipes 100 mm diameter. | m | 305.55 | 305.55 | 152.0 | False | None | None | False | None | False | 46443.6 | 0 |
| 3921018 | 151236 | None | Code13.31.4Vol.2 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall - 32 mm nominal dia Pipes. | m | 420.0 | 420.0 | 50.0 | False | None | None | False | None | False | 21000.0 | 0 |
| 3921019 | 151236 | None | Code13.31.3Vol.2 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall - 25 mm nominal dia Pipes. | m | 333.9 | 333.9 | 200.0 | False | None | None | False | None | False | 66780.0 | 0 |
| 3921020 | 151236 | None | Code13.31.2Vol.2 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall - 20 mm nominal dia Pipes. | m | 254.1 | 254.1 | 50.0 | False | None | None | False | None | False | 12705.0 | 0 |
| 3921021 | 151236 | None | Code13.2.2Vol.2 | Providing and fixing brass bib cock of approved quality : 20 mm nominal bore. | No | 320.25 | 320.25 | 5.0 | False | None | None | False | None | False | 1601.25 | 0 |
| 3921022 | 151236 | None | Code13.3.2Vol.2 | Providing and fixing brass stop cock of approved quality : 20 mm nominal bore. | No | 320.25 | 320.25 | 2.0 | False | None | None | False | None | False | 640.5 | 0 |
| 3921023 | 151236 | None | Code13.5.2Vol.2 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 20 mm nominal bore. | No | 329.7 | 329.7 | 2.0 | False | None | None | False | None | False | 659.4 | 0 |
| 3921024 | 151236 | None | Code13.4.1Vol.2 | Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) :25 mm nominal bore. | No | 576.45 | 576.45 | 1.0 | False | None | None | False | None | False | 576.45 | 0 |
| 3921025 | 151236 | None | Code13.4.2 Vol.2 | Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) :32 mm nominal bore. | No | 627.9 | 627.9 | 5.0 | False | None | None | False | None | False | 3139.5 | 0 |
| 3921026 | 151236 | None | Code13.4.4Vol.2 | Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) : 50 mm nominal bore. | No | 897.75 | 897.75 | 2.0 | False | None | None | False | None | False | 1795.5 | 0 |
| 3921027 | 151236 | None | Code13.5.3Vol.2 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 25 mm nominal bore. | No | 348.6 | 348.6 | 7.0 | False | None | None | False | None | False | 2440.2 | 0 |
| 3921028 | 151236 | None | Code13.8.2.2Vol.2 | Providing and fixing unplasticised PVC connection pipe with brass unions 45 cm length: 20 mm nominal bore. | No | 115.5 | 115.5 | 4.0 | False | None | None | False | None | False | 462.0 | 0 |
| 3921029 | 151236 | None | Code13.34AVol.2 | Providing and fixing rectangular high density polyethylene water storage loft tank with cover, conforming to ISI : 12701, colour of opaque white or as approved by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes. The base support i/c fittings & fixtures for tank shall be paid separately | l | 9.45 | 9.45 | 2000.0 | False | None | None | False | None | False | 18900.0 | 0 |
| 3921030 | 151236 | None | Code13.32.2Vol.2 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20 mm nominal dia pipes. | m | 397.95 | 397.95 | 25.0 | False | None | None | False | None | False | 9948.75 | 0 |
| 3921031 | 151236 | None | Code13.31.3Vol.2 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall. 25 mm nominal dia Pipes. | m | 333.9 | 333.9 | 25.0 | False | None | None | False | None | False | 8347.5 | 0 |
| 3921032 | 151236 | None | Code13.31.6Vol.2 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall. 50 mm nominal dia Pipes. | m | 820.05 | 820.05 | 10.0 | False | None | None | False | None | False | 8200.5 | 0 |
| 3921033 | 151236 | None | Code14.5.1 Vol.2 | Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required : Single half stall urinal with 5 litre P.V.C. automatic flushing cistern | Each | 9074.1 | 9074.1 | 2.0 | False | None | None | False | None | False | 18148.2 | 0 |
| 3921034 | 151236 | None | Code14.1.1Vol.2 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. | Each | 5128.2 | 5128.2 | 1.0 | False | None | None | False | None | False | 5128.2 | 0 |
| 3921035 | 151236 | None | Code14.3.1Vol.2 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid. | Each | 6275.85 | 6275.85 | 2.0 | False | None | None | False | None | False | 12551.7 | 0 |
| 3921036 | 151236 | None | Code14.7.4Vol.2 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap. | Each | 2462.25 | 2462.25 | 4.0 | False | None | None | False | None | False | 9849.0 | 0 |
| 3921037 | 151236 | None | Code14.32.3Vol.2 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Oval shape 450x350 mm (outer dimensions) | Each | 1119.3 | 1119.3 | 2.0 | False | None | None | False | None | False | 2238.6 | 0 |
| 3921038 | 151236 | None | Code14.40.2 Vol.2 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g. | Each | 520.8 | 520.8 | 2.0 | False | None | None | False | None | False | 1041.6 | 0 |
| 3921039 | 151236 | None | Code13.58Vol.2 | Providing and fixing PVC (S.W.R) Gully Trap 10cms x 10cms with all fitting arrangements & all necessary accessories complete. | Each | 363.3 | 363.3 | 2.0 | False | None | None | False | None | False | 726.6 | 0 |
| 3921040 | 151236 | None | Code13.59Vol.2 | Providing and fixing PVC (S.W.R) Nahani Trap 10cms x 10cms with all fitting arrangements & all necessary accessories complete. | Each | 231.0 | 231.0 | 3.0 | False | None | None | False | None | False | 693.0 | 0 |
| 3921041 | 151236 | None | Code13.64.2Vol.2 | Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 150mm nominal dia pipes | m | 806.4 | 806.4 | 50.0 | False | None | None | False | None | False | 40320.0 | 0 |
| 3921042 | 151236 | None | Code13.53Vol.2 | Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: Inside dimensions 455x610 mm and 45 cm deep for single pipe line : With common burnt clay (non modular) bricks of class designation 3.5 | Each | 5924.1 | 5924.1 | 1.0 | False | None | None | False | None | False | 5924.1 | 0 |
| 3921043 | 151236 | None | Code15.85.1Vol.Volume 6- PWD Ele SR 2023-24 | Supply, Installation, testing and commisioning electrically driven jockey pump of capacity 180.0 Lpm at required head end suction type bronze impeller pump oupled to electrical driven motor with suitable HP with all the necessary accessories, operating on 3Ph 50Hz, 400/440 V AC supply including foundation, foundation bolts, anti vibration pad,etc. complete. Including cost of materials, labour, usage charges of machinery complete as per specifications. Control panle is excluded. Required GA drawingfor the pump/ foundation shall be submitted by the contractor. 180 lpm at 70m head | Each | 89250.0 | 89250.0 | 1.0 | False | None | None | False | None | False | 89250.0 | 0 |
| 3921044 | 151236 | None | Code15.84.2Vol.Volume 6- PWD Ele SR 2023-24 | Supply, installation, testing & commissioning of diesel engine driven pump, horizontal mounted, Horizontal spiltcase centrifugal single stage pump, capable of delivering required flow at required head when running at 1800 RPM with adequate BHP automatic diesel engine driven pumpset having the residential silencer system and other accessories like fuel tank, necessary radiator cooling system, flanges, neoprene gaskets (16.0 kg/sqcm), 200 litres fuel storage tank with piping, valves as per detailed specification and two separate starting mechanisms (automatic starting by battery power, electric starting motor as well as manual starting by electric start motor) common bed plate with anti vibration pads, necessary foundation, foundation bolts etc., 1620 lpm at 70m head | Each | 514500.0 | 514500.0 | 1.0 | False | None | None | False | None | False | 514500.0 | 0 |
| 3921045 | 151236 | None | Code15.35Vol.Volume 6- PWD Ele SR 2023-24 | Supply and installation of 4.5Kg C02 gas valve type Fire Extinugisher, Tro lley Mounted, Easy Weight Management used Unused Mechanism, Gross Weight 19.1 Kg. empty Weight 14.6 Kg. Can Height 860MM Diameter 140MM, Discharge Time less than13 Sees, Controllable discharge mechanism, Applicable on Class 8&C Fire, 8 Rating 138, Can Constuction : Hot spinning/Forging, Valve Construction : Forging & Machining, Internal Coating of Can : Not Applicable, External coating of Can : Spray Painting, Sheet metal thickness : 4.5M M lSI Approved,1YearWarranty.with instalert system with Superior quality EPDM Rubber Hosepipe etc., including cost cost of supporting materials like MS stand & accessaries if it is fixing n floor / MS brackets & accessories if it is fixing on wall,, labour, usage charges of machinery complete as per Specifications. complete. Providing 6.5Kg C02 Wheel Type | Each | 8925.0 | 8925.0 | 5.0 | False | None | None | False | None | False | 44625.0 | 0 |
| 3921046 | 151236 | None | Code15.3Vol.Volume 6- PWD Ele SR 2023-24 | Supply and installation of 9Kg Stored Pressure Type, Pressure Gauge, Gross Weight 13.8kg. empty weight 4.8 kg Can Height 611MM, Diameter 175 MM, Discharge Time minimum 12 Sees, Controlable discharge mechanism, Range minimum 4 Meters, applicable on Class A, B,C and electrically started Fire, Can Construction; Deep drawn & CO, Mig welded, Valve Construction: Forging & Machining, Internal Coating of Can : Epoxy Powder coating, External Coating of Can : Epoxy Polyster Powder coating, Sheet metal thickness: 1.60MM, IS 15683 and CE Approved 5 Years Warranty including cost cost of supporting materials like MS stand & accessaries if it is fixing n floor / MS brackets & accessories if it is fixing on wall,, labour, usage charges of machinery complete as per specifications. | Each | 16275.0 | 16275.0 | 15.0 | False | None | None | False | None | False | 244125.0 | 0 |
| 3921047 | 151236 | None | Code15.111Vol.Volume 6- PWD Ele SR 2023-24 | Supplying of four bucket stand alongwith buckets. Complete | Each | 1942.5 | 1942.5 | 16.0 | False | None | None | False | None | False | 31080.0 | 0 |
| 3921048 | 151236 | None | Code15.86Vol.Volume 6- PWD Ele SR 2023-24 | FIRE HYDRANT SYSTEM Supplying Installing, testing and commissioning of 63mm mm dia single headed Gun mental Hydrant Valve with flanged inlet, stop valve, spindle and cast iron hand wheel. It has a female instantaneous outlet with Blank Cap and is Hydrostatically tested to 21 Kgf/cm2 pressure having a flow rate of 900 LPM at 7 Kgf/cm 2 of pressure with blank cap and wheel as per IS 5290 etc. complete including cost of materials, labour, usage charges of machinery complete as per specifications. | Each | 11025.0 | 11025.0 | 8.0 | False | None | None | False | None | False | 88200.0 | 0 |
| 3921049 | 151236 | None | Code15.88Vol.Volume 6- PWD Ele SR 2023-24 | Supplying Installing, testing and commissioning of Reinforced Rubber Lined 2nos .RRL Fire hose of 63mm dia 15m length as per IS 8423 binded with one set of male and Female lnstantainious Gun metal coupling as per IS 903 complete including cost of materials, labour, usage charges of machinery complete as per specifications. | Each | 5250.0 | 5250.0 | 8.0 | False | None | None | False | None | False | 42000.0 | 0 |
| 3921050 | 151236 | None | Code15.59Vol.Volume 6- PWD Ele SR 2023-24 | Smoke detection- Wireless. Supply, installation in position, testing and commissioning of Addressable Optical Smoke Detector radio-linked optical detector (smoke) operates with an optical sensing chamber based on the principle of scattered light sensor. The detector communicates with a fire detection control panel in loop technology via the loop RF interface. Two lithium batteries are accommodated in the detector base one as backup. The two coloured LED indicator with 360 visibility. Mechanical theft protection in the base. Radio transmission of 150 m (in free air), operating at de- licensed frequency range of 865MHz all as specified and directed. Approval by IMQ for EN54-7 & EN54-25. | Each | 12075.0 | 12075.0 | 8.0 | False | None | None | False | None | False | 96600.0 | 0 |
| 3921051 | 151236 | None | Code15.97.3Vol.Volume 6- PWD Ele SR 2023-24 | Supplying, installing, testing & commissioning approved make heavy duty (Class 'C') GI pipes and fittings confirming to IS 1239 PI & II, Malleable Specials such as tees, long radius bends, check nuts, unions, flanges,nipples, etc including cutting, threading, welding/flanged joints with necessary GI washers, nuts, bolts etc., for pipes running in pipe shafts, ceiling, over terrace etc., as per drawing and specifications. The quoted rate shall include for necessary chasing in walls, making bore in walls etc., and making good the chased surfaces and bores in cement mortar etc. complete. Price is inclusive of Fittings like couplings, reducers, bends, Tees, etc & all fittings .The scope of work included with One coat of yellow/etching primer & 2 coats of red enamel paint. Providing and fabricating MS supports using channel, angle, plates pipes, etc., to take the load of number of pipes and the dia of the pipes as per specification and drawings. Rate quoted shall include for supply and providing necessary welding, cutting, G.I "U" clamps, bolt nuts, washers, anchors fastener etc., as per specification or pipe supports for horizontal / vertical pipes running along wall / column, slab trenches etc., to suit different dia pipes made of GI/MS rods, flats, etc., consists of strap, nuts washers, threaded rod etc., The rate quoted shall also include for giving one coat of zinc chromate primer and two coats of approved enamel paint for pipe supports. The pipe support shall be U type support using 50x50x6mm requires for supporting 80mm, 100mm and 150mm dia single pipe.The bracket inside the fire shaft shall be 100mm x50x5mm. 150 mm dia. | m | 4095.0 | 4095.0 | 390.0 | False | None | None | False | None | False | 1597050.0 | 0 |
| 3921052 | 151236 | None | Code15.9Vol.Volume 6- PWD Ele SR 2023-24 | Supplying Installing, testing and commissioning of Hose reel cabin | Each | 5355.0 | 5355.0 | 8.0 | False | None | None | False | None | False | 42840.0 | 0 |
| 3921053 | 151236 | None | Code15.91Vol.Volume 6- PWD Ele SR 2023-24 | Supplying Installing, of M.S. Pressed reel of 600mm dia swinging type motion which allows a 180 swing and conforms to IS:884/85 or Aluminium fitting Single Piece Compact Type. including cost of materials, labour, usage charges of machinery complete as per specifications | Each | 5460.0 | 5460.0 | 8.0 | False | None | None | False | None | False | 43680.0 | 0 |
| 3921054 | 151236 | None | Code15.92Vol.Volume 6- PWD Ele SR 2023-24 | Supplying Installing, testing and commissioning of 19mm dia 40.0m length hose with rubber lining smooth bore, reinforced of natural/synthetic fibres, a rubber cover finish shall be smooth, fluted or fabric marked with minimum thickness of 1.50mm and to with stand a working pressure of 10Kgf/sqcm confirms & tested as per IS 444/ IS 12585 including cost of materials, labour, usage charges of machinery complete as pe specifications | Each | 6300.0 | 6300.0 | 8.0 | False | None | None | False | None | False | 50400.0 | 0 |
| 3921055 | 151236 | None | Code15.87Vol.Volume 6- PWD Ele SR 2023-24 | Supplying Installing, testing and commissioning of Gun metal Branch pipe size of 63mm dia x19mm dia as per IS 903 complete including cost of materials, labour, usage charges of machinery complete as per specifications. | Each | 4725.0 | 4725.0 | 8.0 | False | None | None | False | None | False | 37800.0 | 0 |
| 3921056 | 151236 | None | Code1.1.1Vol.Volume 6- PWD Ele SR 2023-24 | Open Conduit System: Supplying heavy gauge PVC conduit pipe ....... dia ....... mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted wood plugs in case of RCC ceiling and RCC wall/ stone structure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws.1.1.1) 19/20 mm dia 2 mm thick PWD,Elct, SR2023-24 Page No. 2 ITEM code 1.2.2 | Each | 72.45 | 72.45 | 200.0 | False | None | None | False | None | False | 14490.0 | 0 |
| 3921057 | 151236 | None | Code1.1.2Vol.Volume 6- PWD Ele SR 2023-24 | Open Conduit System
Supplying heavy gauge PVC conduit pipe ....... dia ....... mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted wood plugs in case of RCC ceiling and RCC wall/ stone structure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws.1.1.2) 25 mm dia 2 mm thick PWD,Elct, SR2023-24 Page No. 2 ITEM code 1.2.2 | Mtr | 85.05 | 85.05 | 300.0 | False | None | None | False | None | False | 25515.0 | 0 |
| 3921058 | 151236 | None | Code1.3.1Vol.Volume 6- PWD Ele SR 2023-24 | Supplying heavy gauge PVC Conduit Pipe 19/20 dia 2 mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering upto the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary.1.3.1) 19/20 mm dia 2 mm thick PWD,Elct, SR2023-24 Page No. 2 ITEM code 1.3.1 | Mtr | 71.4 | 71.4 | 100.0 | False | None | None | False | None | False | 7140.0 | 0 |
| 3921059 | 151236 | None | Code1.3.2Vol.Volume 6- PWD Ele SR 2023-24 | Supplying heavy gauge PVC Conduit Pipe 19/20 dia 2 mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering upto the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary.1.3.2) 25 mm dia 2 mm thick PWD,Elct, SR2023-24 Page No. 2 ITEM code 1.3.2 | Mtr | 82.95 | 82.95 | 150.0 | False | None | None | False | None | False | 12442.5 | 0 |
| 3921060 | 151236 | None | Code2.2.1Vol.Volume 6- PWD Ele SR 2023-24 | Point wiring using Copper wire without switch.Supplying and wiring adopting loop system in existing PVCConduit /casing capping casing capping using 2x1.5Sqmm(Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLSmulti strand PVC insulated copper wire (confirming toIS-694: and latest amendments) without control switchshall be fixed on the existing plastic sheet/ gang box, theother end of the wires shall be terminated withsufficientloose length in a wood/PVC round block. complete for each outlet2.2.1) Short point upto 3Mtr from tapping point to out let via switch box.PWD,Elct, SR2023-24 Page No. 5 ITEM code 2.2.1 | Point | 282.45 | 282.45 | 10.0 | False | None | None | False | None | False | 2824.5 | 0 |
| 3921061 | 151236 | None | Code2.2.2Vol.Volume 6- PWD Ele SR 2023-24 | Point wiring using Copper wire without switch.Supplying and wiring adopting loop system in existing PVCConduit /casing capping casing capping using 2x1.5Sqmm(Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLSmulti strand PVC insulated copper wire (confirming toIS-694: and latest amendments) without control switchshall be fixed on the existing plastic sheet/ gang box, theother end of the wires shall be terminated withsufficientloose length in a wood/PVC round block. complete for each outlet.Medium point above 3Mtr upto 6Mtr from tapping point to out let viaswitch box.PWD,Elct, SR2023-24 Page No. 5 ITEM code 2.2.2 | Point | 397.95 | 397.95 | 18.0 | False | None | None | False | None | False | 7163.1 | 0 |
| 3921062 | 151236 | None | Code2.2.3Vol.Volume 6- PWD Ele SR 2023-24 | Point wiring using Copper wire without switch.Supplying and wiring adopting loop system in existing PVCConduit /casing capping casing capping using 2x1.5Sqmm(Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLSmulti strand PVC insulated copper wire (confirming toIS-694: and latest amendments) without control switchshall be fixed on the existing plastic sheet/ gang box, theother end of the wires shall be terminated withsufficientloose length in a wood/PVC round block. complete for each outlet.2.2.3)Long point above 6Mtr upto 10Mtr from tapping point to out let via switch boxPWD,Elct, SR2023-24 Page No. 5 ITEM code 2.2.3 | Point | 582.75 | 582.75 | 34.0 | False | None | None | False | None | False | 19813.5 | 0 |
| 3921063 | 151236 | None | Code2.3.2Vol.Volume 6- PWD Ele SR 2023-24 | Wire: Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments.2.3.2)1.5 sqmm,Elct, SR2023-24 Page No. 5 ITEM code 2.3.2 | Mtr | 27.3 | 27.3 | 1000.0 | False | None | None | False | None | False | 27300.0 | 0 |
| 3921064 | 151236 | None | Code2.3.3Vol.Volume 6- PWD Ele SR 2023-24 | Wire: Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments.2.3.3)2.5 sqmmElct, SR2023-24 Page No. 5 ITEM code2.3.3 | Mtr | 44.1 | 44.1 | 2000.0 | False | None | None | False | None | False | 88200.0 | 0 |
| 3921065 | 151236 | None | Code2.3.4Vol.Volume 6- PWD Ele SR 2023-24 | Wire: Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments.2.3.4)4 sqmm,Elct, SR2023-24 Page No. 5 ITEM code 2.3.4 | Mtr | 66.15 | 66.15 | 500.0 | False | None | None | False | None | False | 33075.0 | 0 |
| 3921066 | 151236 | None | Code2.3.5Vol.Volume 6- PWD Ele SR 2023-24 | Wire: Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments.2.3.5)6 sqmm,Elct, SR2023-24 Page No. 5 ITEM code 2.3.5 | Mtr | 96.6 | 96.6 | 500.0 | False | None | None | False | None | False | 48300.0 | 0 |
| 3921067 | 151236 | None | Code3.4.2Vol.Volume 6- PWD Ele SR 2023-24 | Powder coated Galvanized metal box:
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmlyflush mounted after due groove cutting in Brick/Stone/C.C wall3.4.2)3WayPWD,Elct, SR2023-24 Page No. 8 ITEM code 3.4.2 | Nos | 166.95 | 166.95 | 10.0 | False | None | None | False | None | False | 1669.5 | 0 |
| 3921068 | 151236 | None | Code3.4.3Vol.Volume 6- PWD Ele SR 2023-24 | Powder coated Galvanized metal box:
Supplying and flush mounting powder coated / galvanized metal box
suitable for mounting modular switch plates. The box should be firmlyflush mounted after due groove cutting in Brick/Stone/C.C wall3.4.3)4-5WayPWD,Elct, SR2023-24 Page No. 8 ITEM code 3.4.3 | Nos | 185.85 | 185.85 | 20.0 | False | None | None | False | None | False | 3717.0 | 0 |
| 3921069 | 151236 | None | Code3.4.4Vol.Volume 6- PWD Ele SR 2023-24 | Powder coated Galvanized metal box:
Supplying and flush mounting powder coated / galvanized metal box
suitable for mounting modular switch plates. The box should be firmlyflush mounted after due groove cutting in Brick/Stone/C.C wall3.4.4)6WayPWD,Elct, SR2023-24 Page No. 8 ITEM code 3.4.4 | Nos | 231.0 | 231.0 | 5.0 | False | None | None | False | None | False | 1155.0 | 0 |
| 3921070 | 151236 | None | Code3.4.5Vol.Volume 6- PWD Ele SR 2023-24 | Powder coated Galvanized metal box:
Supplying and flush mounting powder coated / galvanized metal box
suitable for mounting modular switch plates. The box should be firmlyflush mounted after due groove cutting in Brick/Stone/C.C wall3.4.5)8WayPWD,Elct, SR2023-24 Page No. 8 ITEM code 3.4.5 | Nos | 274.05 | 274.05 | 5.0 | False | None | None | False | None | False | 1370.25 | 0 |
| 3921071 | 151236 | None | Code3.4.6Vol.Volume 6- PWD Ele SR 2023-24 | Powder coated Galvanized metal box:
Supplying and flush mounting powder coated / galvanized metal box
suitable for mounting modular switch plates. The box should be firmlyflush mounted after due groove cutting in Brick/Stone/C.C wall3.4.6)10-12WayPWD,Elct, SR2023-24 Page No. 8 ITEM code 3.4.6 | Nos | 334.95 | 334.95 | 10.0 | False | None | None | False | None | False | 3349.5 | 0 |
| 3921072 | 151236 | None | Code3.4.7Vol.Volume 6- PWD Ele SR 2023-24 | Powder coated Galvanized metal box:
Supplying and flush mounting powder coated / galvanized metal box
suitable for mounting modular switch plates. The box should be firmlyflush mounted after due groove cutting in Brick/Stone/C.C wall3.4.7)16WayPWD,Elct, SR2023-24 Page No. 8 ITEM code 3.4.7 | Nos | 381.15 | 381.15 | 2.0 | False | None | None | False | None | False | 762.3 | 0 |
| 3921073 | 151236 | None | Code3.5.2Vol.Volume 6- PWD Ele SR 2023-24 | modular Switch Plate
Supplying and fixing superior quality modular switchmounting polycarbonate plate with necessary supportingback plate with required nos. of machine screws, bolts nutsetc., complete on the existing metal/PVC box.3.5.2)3 ModulePWD,Elct, SR2023-24 Page No. 8 ITEM code 3.5.2 | Nos | 169.05 | 169.05 | 10.0 | False | None | None | False | None | False | 1690.5 | 0 |
| 3921074 | 151236 | None | Code3.5.3Vol.Volume 6- PWD Ele SR 2023-24 | modular Switch Plate
Supplying and fixing superior quality modular switchmounting polycarbonate plate with necessary supportingback plate with required nos. of machine screws, bolts nutsetc., complete on the existing metal/PVC box.3.5.3)4 ModulePWD,Elct, SR2023-24 Page No. 8 ITEM code 3.5.3 | Nos | 183.75 | 183.75 | 20.0 | False | None | None | False | None | False | 3675.0 | 0 |
| 3921075 | 151236 | None | Code3.5.4Vol.Volume 6- PWD Ele SR 2023-24 | modular Switch Plate
Supplying and fixing superior quality modular switchmounting polycarbonate plate with necessary supportingback plate with required nos. of machine screws, bolts nutsetc., complete on the existing metal/PVC box.3.5.4)6 ModulePWD,Elct, SR2023-24 Page No. 8 ITEM code 3.5.4 | Nos | 245.7 | 245.7 | 5.0 | False | None | None | False | None | False | 1228.5 | 0 |
| 3921076 | 151236 | None | Code3.5.5Vol.Volume 6- PWD Ele SR 2023-24 | modular Switch Plate
Supplying and fixing superior quality modular switchmounting polycarbonate plate with necessary supportingback plate with required nos. of machine screws, bolts nutsetc., complete on the existing metal/PVC box.3.5.5)8 ModulePWD,Elct, SR2023-24 Page No. 8 ITEM code 3.5.5 | Nos | 298.2 | 298.2 | 5.0 | False | None | None | False | None | False | 1491.0 | 0 |
| 3921077 | 151236 | None | Code3.5.6Vol.Volume 6- PWD Ele SR 2023-24 | modular Switch Plate
Supplying and fixing superior quality modular switchmounting polycarbonate plate with necessary supportingback plate with required nos. of machine screws, bolts nutsetc., complete on the existing metal/PVC box.3.5.6)10-12 ModulePWD,Elct, SR2023-24 Page No. 8 ITEM code 3.5.6 | Nos | 361.2 | 361.2 | 10.0 | False | None | None | False | None | False | 3612.0 | 0 |
| 3921078 | 151236 | None | Code3.5.7Vol.Volume 6- PWD Ele SR 2023-24 | modular Switch Plate
Supplying and fixing superior quality modular switchmounting polycarbonate plate with necessary supportingback plate with required nos. of machine screws, bolts nutsetc., complete on the existing metal/PVC box.3.5.7)16 ModulePWD,Elct, SR2023-24 Page No. 8 ITEM code 3.5.7 | Nos | 416.85 | 416.85 | 2.0 | False | None | None | False | None | False | 833.7 | 0 |
| 3921079 | 151236 | None | Code3.6.1Vol.Volume 6- PWD Ele SR 2023-24 | Modular switch
Supplying and fixing of modular switch & connected
accessories on existing modular switch plate as per IS 3854
and IS 1293.3.6.1)6Amps one way switch.PWD,Elct, SR2023-24 Page No. 9 ITEM code 3.6.1 | Nos | 107.1 | 107.1 | 70.0 | False | None | None | False | None | False | 7497.0 | 0 |
| 3921080 | 151236 | None | Code3.6.2Vol.Volume 6- PWD Ele SR 2023-24 | Supplying and fixing of modular switch & connected
accessories on existing modular switch plate as per IS 3854
and IS 1293.3.6.2)6Amps two way.
PWD,Elct, SR2023-24 Page No. 9 IItem code 3.6.2 | Nos | 174.3 | 174.3 | 2.0 | False | None | None | False | None | False | 348.6 | 0 |
| 3921081 | 151236 | None | Code3.6.10Vol.Volume 6- PWD Ele SR 2023-24 | Modular socket
Supplying and fixing of modular switch & connected
accessories on existing modular switch plate as per IS 3854
and IS 1293.3.6.10)6/16 A Universal socketPWD,Elct, SR2023-24 Page No. 9 ITEM code 3.6.10 | Nos | 247.8 | 247.8 | 4.0 | False | None | None | False | None | False | 991.2 | 0 |
| 3921082 | 151236 | None | Code3.6.3Vol.Volume 6- PWD Ele SR 2023-24 | Modular socket
Supplying and fixing of modular switch & connected
accessories on existing modular switch plate as per IS 3854
and IS 1293.3.6.3)6Amps 3way socketPWD,Elct, SR2023-24 Page No. 9 ITEM code 3.6.3 | Nos | 179.55 | 179.55 | 35.0 | False | None | None | False | None | False | 6284.25 | 0 |
| 3921083 | 151236 | None | Code3.6.7Vol.Volume 6- PWD Ele SR 2023-24 | Modular switch
Supplying and fixing of modular switch & connected
accessories on existing modular switch plate as per IS 3854
and IS 1293.3.6.7)16Amps one way switch.PWD,Elct, SR2023-24 Page No. 8 ITEM code 3.6.7 | Nos | 189.0 | 189.0 | 4.0 | False | None | None | False | None | False | 756.0 | 0 |
| 3921084 | 151236 | None | Code3.14.6Vol.Volume 6- PWD Ele SR 2023-24 | Supplying and fixing/replacing of 6/16/32Amps electrical
accessorieson existing switchboard.3.14.6) 6 Amps pendent holder
PWD,Elct, SR2023-24 Page No. 10 IItem code 3.14.6 | Nos | 74.55 | 74.55 | 20.0 | False | None | None | False | None | False | 1491.0 | 0 |
| 3921085 | 151236 | None | Code3.14.5Vol.Volume 6- PWD Ele SR 2023-24 | Supplying and fixing/replacing of 6/16/32Amps electrical
accessorieson existing switch board. 3.14.5) 6 Amps Bakelite Ceiling RosePWD,Elct, SR2023-24 Page No. 10 IItem code 3.14.5 | Nos | 81.9 | 81.9 | 20.0 | False | None | None | False | None | False | 1638.0 | 0 |
| 3921086 | 151236 | None | Code11.3.2Vol.Volume 6- PWD Ele SR 2023-24 | LED Tube Fitting
Supplying of ......feet - PVC Batten with integrated LED tube .....W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. PowerInput: 220-240V @ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition.11.3.2) LED light fighting 1 x4'- 20/22 w
PWD,Elct, SR2023-24 Page No.43 ITEM code 11.3.2 | Nos | 724.5 | 724.5 | 5.0 | False | None | None | False | None | False | 3622.5 | 0 |
| 3921087 | 151236 | None | Code11.6.4Vol.Volume 6- PWD Ele SR 2023-24 | LED Square Type Fitting
Supplying of recess mounting non integral type ........ LED w
luminaire comprising of pressure decast/extruded aluminium housing,with spring loaded false ceiling clamps, Power LEDs with CCT 6500degree K, CRI 70%. efficacy 100 lumen per W, 120degree beamspread, life 25000 burning hours and Compliance to IS 10322/IEC60598, LM 79 & LM 80. The lamp compartment is enclosed withanti glare opal diffuser which enhances the lighting level LEDs aredriven by HF electronic driver integrated in a separate control gearassembly., with PF 0.95, power loss should5% of lamp Wage.,short circuit & open circuit protection to be integrated in the circuit,THD less than 20%, Life as per LM 79. The operating input voltageshould be between 130 to 275 V. BIS Approved and Tested byNABL/CPRI accredited laboratory with 2 years Warranty againstany manufacturing defect working under standard electrical condition.11.6.4) LED modular down light 2'x2' 42 W
PWD,Elct, SR2023-24 Page No.45 ITEM code 11.6.4 | Nos | 5104.05 | 5104.05 | 20.0 | False | None | None | False | None | False | 102081.0 | 0 |
| 3921088 | 151236 | None | Code13.7.1Vol.Volume 6- PWD Ele SR 2023-24 | LED Fitting fixing Charges
Fixing all types and all capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling /rafters / girders using 23/0.0076” twin twisted PVC insulatedwires, required Nos of round blocks and clamps.3.7.1) On wall / ceiling / Rafter / Girders
PWD,Elct, SR2023-24 Page No. 56 ITEM code 13.7.1 | Nos | 128.1 | 128.1 | 50.0 | False | None | None | False | None | False | 6405.0 | 0 |
| 3921089 | 151236 | None | Code11.8.8Vol.Volume 6- PWD Ele SR 2023-24 | LED Street light.
11.8 Supply of LED Streetlight luminaire with pressure die cast aluminium housing
body for optimal thermal dissipation. Lamp compartment comprising of anti
glare clear diffuser with Injection moulded polycarbonate material, delivering
superior light output Rated life Burning Hrs 50000 hr @ Lumen
Maintenance of 70%, maximum light intensity should be between 60 degrees to
70 degrees. CCT 5500K, IP66 optical and electrical compartment & impact
resistance of complete luminaire IK08. Power Factor 0.9 with mains,
Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/
miss-wiring protection. Compatible for pole mounting with outer dia of 40mm to
50mm. Universal Voltage driver to operate wide voltage range from 100V to270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 &
LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with
single screw to ensure ease of maintenance at the sight site location with
minimized minimal tools. LED Light fixture with ........W System Power
consumption. LED Efficiency1301m/w, nominal CRI 75. Luminaire
manufacturer should have in-house facility accredited by NABL/CPRI &
any Government certified agency & Design & Development facility
certified by ISO 9001:2008. Housing with supplier word mark /name shall be
Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years
against any manufacturing defect working under standard electrical conditions as
mentioned above should be given by LED manufacturer & Cree/Nichia/
Lumileds/Osram make LED Source 11.8.8)LED Streetlight 200 W PWD,Elct, SR2023-24 Page No.46 ITEM code11.8.8 | Nos | 20048.7 | 20048.7 | 20.0 | False | None | None | False | None | False | 400974.0 | 0 |
| 3921090 | 151236 | None | Code6.5.1Vol.Volume 6- PWD Ele SR 2023-24 | Supplying wall mounting fan suitable to operate at single- phase 230v AC. supply.6.5.1) 300 mm SweepPage No30 IItem code6.5.1 PWD,Elct, SR2023-24 | Nos | 2616.6 | 2616.6 | 20.0 | False | None | None | False | None | False | 52332.0 | 0 |
| 3921091 | 151236 | None | Code13.11Vol.Volume 6- PWD Ele SR 2023-24 | FAN Fixing Charges
Fixing a ceiling /wall mounting fan of all capacities and all types, with necessary clamps and 'S' hook made out of 15mm dia MS rod, with 5 A. ceiling rose of approved quality with necessary length of 23/0.0076 inch PVC insulated twin twisted wire of approved quality, mounted on a suitable size wooden board and wired.PWD,Elct, SR2023-24 Page No. 57 ITEM code 13.11 | Nos | 330.75 | 330.75 | 20.0 | False | None | None | False | None | False | 6615.0 | 0 |
| 3921092 | 151236 | None | Code6.2.1Vol.Volume 6- PWD Ele SR 2023-24 | EXHAUST FAN
Supplying of 1440rpm heavy duty exhaust fan with bracketblades suitable to operate on 230V 50Hz, AC Supply complete.12" Sweep (300 mm)PWD,Elct, SR2023-24 Page No. 30 ITEM code 6.2.1 | Nos | 3117.45 | 3117.45 | 2.0 | False | None | None | False | None | False | 6234.9 | 0 |
| 3921093 | 151236 | None | Code13.14Vol.Volume 6- PWD Ele SR 2023-24 | EXHAUST FAN Fixing Charges
Fixing one exhaust fan in the nitch already left in the wall withbolts and nuts and 5 A. ceiling rose with sufficient length of23/0.0076 inch PVC insulated twin core wire.PWD,Elct, SR2023-24 Page No. 57 ITEM code 13.14 | Nos | 516.6 | 516.6 | 2.0 | False | None | None | False | None | False | 1033.2 | 0 |
| 3921094 | 151236 | None | Code5.20.1Vol.Volume 6- PWD Ele SR 2023-24 | Supplying, fixing and wiring Residual current circuit breaker (RCCB)
240/450V upto 300mA sensitivity on existing wood/ panel board.
5.20.1)16-25 Amps 2 pole
PWD,Elct, SR2023-24 Page No. 18 IItem code 5.20.1 | Nos | 4490.85 | 4490.85 | 5.0 | False | None | None | False | None | False | 22454.25 | 0 |
| 3921095 | 151236 | None | Code5.18.1Vol.Volume 6- PWD Ele SR 2023-24 | MCB Switches.
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.5.18.1) 6-32 Amps SP PWD,Elct, SR2023-24 Page No. 17 ITEM code5.18.1 | Nos | 435.75 | 435.75 | 40.0 | False | None | None | False | None | False | 17430.0 | 0 |
| 3921096 | 151236 | None | Code5.18.7Vol.Volume 6- PWD Ele SR 2023-24 | MCB Switches.
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.5.18.7) 6-32 Amps TPN PWD,Elct, SR2023-24 Page No. 17 ITEM code5.18.7 | Nos | 1802.85 | 1802.85 | 5.0 | False | None | None | False | None | False | 9014.25 | 0 |
| 3921097 | 151236 | None | Code5.19.11Vol.Volume 6- PWD Ele SR 2023-24 | Supplying and fixing regular MCB distribution boards on wall/ wood board / flush mounting using required clamps bolts,nuts etc., with provision for fixing suitable type capacityMCB's single phase / 3 phase / single door with powdercoated painting. Made out of 14 SWG MS enclosure. II - Double Door5.19.11)4Way TP &NPWD,Elct, SR2023-24 Page No. 18 IItem code 5.19.11 | Nos | 4239.9 | 4239.9 | 4.0 | False | None | None | False | None | False | 16959.6 | 0 |
| 3921098 | 151236 | None | Code5.19.12Vol.Volume 6- PWD Ele SR 2023-24 | Supplying and fixing regular MCB distribution boards on wall/ wood board / flush mounting using required clamps bolts,nuts etc., with provision for fixing suitable type capacityMCB's single phase / 3 phase / single door with powdercoated painting. Made out of 14 SWG MS enclosure. II - Double Door5.19.12)6Way TP &NPWD,Elct, SR2023-24 Page No. 18 IItem code 5.19.12 | Each | 5187.0 | 5187.0 | 1.0 | False | None | None | False | None | False | 5187.0 | 0 |
| 3921099 | 151236 | None | Code11.11.4Vol.Volume 6- PWD Ele SR 2023-24 | Supplying & fixing of retrofit type - LED bulb.......W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI 70%. efficacy 80 lumen per watt, life 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF 0.95, power loss should 5% of lamp wattage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 volts. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty againstany manufacturing defect working under standard electrical condition11.11.4)9W 6500K
PWD,Elct, SR2019-20 Page No.47 IItem code11.11.4 | Each | 161.7 | 161.7 | 2.0 | False | None | None | False | None | False | 323.4 | 0 |