| 1723988519000 | 0 | None | None | Other Works | Construction of Disabled friendly Toilets for K Hosahalli School under Haronahalli Grama Panchayath | 126792.1 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3803636 | 144417 | None | code01 | Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. In all kinds of soils Depth upto 3 m(PWD COMMON SR VOL-1 2021-22 ,PAGE 8,ITEM No 1.14.1) | Cum | 102.0 | 102.0 | 8.8695 | False | None | None | False | None | False | 904.689 | 0 | | 3803637 | 144417 | None | code02 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost ofall materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates. (PWD COMMON SR VOL1 2021-22 PAGE NO 15, ITEM NO 2.1.3) | Cum | 5989.0 | 5989.0 | 2.02 | False | None | None | False | None | False | 12097.78 | 0 | | 3803638 | 144417 | None | code03 | Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)(PWD COMMON SR VOL2 2021-22 PAGE NO 09, ITEM NO 5.4) | Cum | 6389.0 | 6389.0 | 2.702 | False | None | None | False | None | False | 17263.078 | 0 | | 3803639 | 144417 | None | code04 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost ofall materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates. (PWD COMMON SR VOL1 2021-22 PAGE NO 15, ITEM NO 2.1.4) | Cum | 6217.0 | 6217.0 | 0.52 | False | None | None | False | None | False | 3232.84 | 0 | | 3803640 | 144417 | None | code05 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications.(PWD COMMON SR VOL-2 2023-24 PAGE NO 17, ITEM NO-6.33) | Sqm | 1231.0 | 1231.0 | 27.81 | False | None | None | False | None | False | 34234.11 | 0 | | 3803641 | 144417 | None | code06 | Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished seamless type tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.(Pwd Common SR (Volume-2) 2021-22 P. No.81. No. 11.16.2) | Kg | 147.0 | 147.0 | 48.24 | False | None | None | False | None | False | 7091.28 | 0 | | 3803642 | 144417 | None | code07 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. (PWD COMMON SR VOL-2 2021-22 PAGE NO 75, ITEM NO-11.5.1) | Sqm | 4478.0 | 4478.0 | 3.78 | False | None | None | False | None | False | 16926.84 | 0 | | 3803643 | 144417 | None | code08 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 m or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.(PWD common sr 2023-24/vol-2/26/7.38) | Sqm | 568.0 | 568.0 | 9.36 | False | None | None | False | None | False | 5316.48 | 0 | | 3803644 | 144417 | None | code09 | Providing 15 mm cement plaster on the rough side of single or half brickwall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (PWD COMMON SR VOL-2 2023-24 PAGE NO 41, ITEM NO-8.2.2) | Sqm | 279.0 | 279.0 | 54.81 | False | None | None | False | None | False | 15291.99 | 0 | | 3803645 | 144417 | None | code10 | Providing and laying Cement concrete flooring 40 mm thickwith 20 mm nominal size stone aggregate using 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry complete. (PWD COMMON SR VOL-2 2023-24 PAGE NO 60, ITEM NO-9.1) | Sqm | 451.0 | 451.0 | 4.86 | False | None | None | False | None | False | 2191.86 | 0 | | 3803646 | 144417 | None | code11 | Painting with silicon & acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces :Two coats with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(PWD common sr 2023-24/vol-2/47/8.35.2) | Sqm | 198.0 | 198.0 | 54.81 | False | None | None | False | None | False | 10852.38 | 0 | | 3803647 | 144417 | None | code12 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(PWD COMMON SR VOL-2 203-24 PAGE NO 48, ITEM NO-8.41) | Sqm | 167.0 | 167.0 | 8.316 | False | None | None | False | None | False | 1388.772 | 0 |
|