createdTs	None
version	None
createdDate	None
modifiedDate	None
noticeInvitingTenderDTO	createdTs 1724827881725 version 9 createdDate None modifiedDate None tenderType RFQ evaluationType TWO_COVER evaluationTypeText Two Cover invitingStrategy OPEN invitingStrategyText Open taxType INCLUSIVE_TAX tenderFee 5000.00 emd 1374000.00 bidValueType ITEM_WISE bidValueTypeText Item wise tenderReceiptClose 13-09-2024 17:30:00 tenderQueryClose 31-08-2024 16:00:00 technicalBidOpen 17-09-2024 11:00:07 publishedDate 28-08-2024 13:40:03 publishedByPost KSDB_CE_COFF publishedByUser KPE16739 - N P BALARAJU bidValidityPeriod 90 noOfCalls 1 preBidMeetingDate 31-08-2024 16:00:00 preBidMeetingYn True preQualificationBidOpen None denominationType RUPEES denominationTypeText Rupees retenderedYn None percentageRateTypeText None contactPerson NP BALARAJU splitEmdRequiredYn False emdBankGuarantee None emdCash None bgValidityPeriod None hideWeightage None multipleCurrencySelectionAllowedYn False isTechWeightageAllowed False highestBidderSelection False isVariableEmdAllowed None qcbsTenderYn None itemwiseEmdRequiredYn None sampleSubmissionDate None officeNumber 08023563504 mobileNumber 8884492355 tenderSupplierList None
tenderSchedule	createdTs 1724827881749 version 15 createdDate None modifiedDate None tenderNumber KSDB/2024-25/BD/WORK_INDENT171 title Proposed Construction of KSIC Bhavan at Queens Road, Bangalore City. description Proposed Construction of KSIC Bhavan at Queens Road, Bangalore City. category WORKS categoryText Works ecv 77602353.79 deptName Karnataka Slum Development Board status PUBLISHED statusText Published remarks None csrValue None ecvtenderYn False location 7304 locationName KSDB Chief Engineer Office Bengaluru provisionalAmount 98500000.0 groupOverheadTotal None fileNumber KSDB/Commr/CE/BC/KSIC/2024-25
tenderSubEstimateList	createdTs version createdDate modifiedDate workCategoryName subEstimateName estimateTotal itemList 1724827882000 1 None None Buildings Proposed Construction of KSIC Bhavan at Queens Road, Bangalore City. 19422907.53 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3870457 148321 None code01 Civil work :Basement floor: Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, including removal and disposal of top organic soil not exceeding 150 mm in thickness.By Mechanical Means using Dozer In area of light jungle. Sqm 432.3 432.3 7.803 False None None False None False 3373.2369 0 3870458 148321 None code02 Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work. Cum 104.5 104.5 234.09 False None None False None False 24462.405 0 3870459 148321 None code03 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work 1.14.1 In all kinds of soils Depth upto 3 m. Cum 112.2 112.2 2353.1232 False None None False None False 264020.42304 0 3870460 148321 None code04 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In ordinary/soft rock without blasting upto 1.5 m depth Cum 399.3 399.3 441.21 False None None False None False 176175.153 0 3870461 148321 None code05 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In ordinary/soft rock without blasting 1.5 m to 3.0 depth Cum 467.5 467.5 129.3 False None None False None False 60447.75 0 3870462 148321 None code06 Loading and Unloading of Stone Boulder/Stone aggregates/ Sand/Kankar/Moorum.& Cost of Haulage excluding Loading & unloading. Taking output 10 t load and lead 40 Km = 400 t.km.(135+12*40*1.35)=783 Cum 861.3 861.3 2020.4306 False None None False None False 1740196.87578 0 3870463 148321 None code07 Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 l/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications. Sqm 129.8 129.8 610.0 False None None False None False 79178.0 0 3870464 148321 None code08 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. Cum 292.6 292.6 2941.404 False None None False None False 860654.8104 0 3870465 148321 None code09 Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work. Cum 521.4 521.4 192.431 False None None False None False 100333.5234 0 3870466 148321 None code10 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications.Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates. Including FormWork Cum 6587.9 6587.9 111.513 False None None False None False 734636.4927 0 3870467 148321 None code11 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, The cost includes Form work, lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates - FOOTINGS, Cum 7527.16 7527.16 239.4734 False None None False None False 1802554.597544 0 3870468 148321 None code12 do - PEDESTALS Cum 7666.56 7666.56 2.5042 False None None False None False 19198.599552 0 3870469 148321 None code13 do - GRADE SLAB Cum 7178.68 7178.68 61.0 False None None False None False 437899.48 0 3870470 148321 None code14 do - RETAINING WALL FOOTING Cum 7178.68 7178.68 41.622 False None None False None False 298791.01896 0 3870471 148321 None code15 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes Form work, all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates - COLUMNS Cum 12796.41 12796.41 33.669 False None None False None False 430842.32829 0 3870472 148321 None code16 do - LIFT CORE WALL Cum 12796.41 12796.41 82.305 False None None False None False 1053208.52505 0 3870473 148321 None code17 do - PLINTH BEAM Cum 11290.95 11290.95 20.57 False None None False None False 232254.8415 0 3870474 148321 None code18 do - RCC BEAMS Cum 12043.68 12043.68 54.204 False None None False None False 652815.63072 0 3870475 148321 None code19 do - RCC SLAB Cum 11290.95 11290.95 93.7586 False None None False None False 1058623.66467 0 3870476 148321 None code20 do - RCC STAIRCASE Cum 11290.95 11290.95 3.9675 False None None False None False 44796.844125 0 3870477 148321 None code21 do - LINTELS Cum 12043.68 12043.68 0.8347 False None None False None False 10052.859696 0 3870478 148321 None code22 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates.Including FormWork Cum 10574.85 10574.85 3.8685 False None None False None False 40908.807225 0 3870479 148321 None code23 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Tonne 98501.7 98501.7 66.3266 False None None False None False 6533282.85522 0 3870480 148321 None code24 Extra for providing throating or drip moulding to RCC chejjas with plastering ( labour charges only ) as per specifications. Specification No . KBS Rmtr 36.3 36.3 105.0 False None None False None False 3811.5 0 3870481 148321 None code25 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. Sqm 1441.0 1441.0 35.0887 False None None False None False 50562.8167 0 3870482 148321 None code26 Providing and fixing of louvered ventilator made out of multi chambered UPVC Matching to RAL9016) sections and with minimum To2 (Titanium Dioxide) at 6PHR with TPE (Thermo Plastic Elastomer) and lead free with gaskets grey colour having isolated drainage and reinforced with Galvanized Iron profile throughout the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Lower clip in Aluminum powder coated in white will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm Maximum possible size1000mm x1000mm. The cost is inclusive of all fixtures and separate charges for minor T&Ps shall not be made. Sqm 6290.9 6290.9 44.9999 False None None False None False 283089.87091 0 3870483 148321 None code27 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding Kg 184.8 184.8 945.0 False None None False None False 174636.0 0 3870484 148321 None code28 Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge... ( Inside) Sqm 343.2 343.2 543.026 False None None False None False 186366.5232 0 3870485 148321 None code29 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. Sqm 110.0 110.0 1113.613 False None None False None False 122497.43 0 3870486 148321 None code30 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.. ( Outside) Sqm 383.9 383.9 251.0999 False None None False None False 96397.25161 0 3870487 148321 None code31 Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per direc- tions of Engineer-in-charge. Sqm 389.4 389.4 23.6549 False None None False None False 9211.21806 0 3870488 148321 None code32 Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. ( length of mesh only be measured for payment.Plaster mesh 150mm wide Rmtr 41.8 41.8 4200.0 False None None False None False 175560.0 0 3870489 148321 None code33 Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge: 10mm to 15 mm wide and 8 mm deep groove. Rmtr 57.2 57.2 536.8 False None None False None False 30704.96 0 3870490 148321 None code34 Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 600x600 mm Sqm 1292.5 1292.5 5.9 False None None False None False 7625.75 0 3870491 148321 None code35 Providing and laying Cement concrete flooring 40 mm thick with 20 mm nominal size stone aggregate using 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry complete. Sqm 496.1 496.1 552.0 False None None False None False 273847.2 0 3870492 148321 None code36 Providing and laying Polished Glazed Vitrified tiles with thickness 10 mm in floor with different sizes with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).Size of Tile 600x600 mm Sqm 1458.6 1458.6 22.32 False None None False None False 32555.952 0 3870493 148321 None code37 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. ** Polished Granite stone slab Black, Cat Eye, River Pink or equivalent. Sqm 3137.2 3137.2 5.0 False None None False None False 15686.0 0 3870494 148321 None code38 Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints fin- ished with cement mortar 1:3 over existing cement concrete bed , including cost of materials, mortar, labour, curing complete as per specifications. Sqm 5860.8 5860.8 39.24 False None None False None False 229977.792 0 3870495 148321 None code39 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 324.5 324.5 22.32 False None None False None False 7242.84 0 3870496 148321 None code40 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Kg 621.5 621.5 176.399 False None None False None False 109631.9785 0 3870497 148321 None code41 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 139.7 139.7 1113.613 False None None False None False 155571.7361 0 3870498 148321 None code42 Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 g/L and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 L/ 10 m². Over and including priming coat of exterior primer applied @ 0.90 L/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 171.6 171.6 251.099 False None None False None False 43088.5884 0 3870499 148321 None code43 Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 L/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 311.3 311.3 251.099 False None None False None False 78167.1187 0 3870500 148321 None code44 Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 55.0 55.0 45.0 False None None False None False 2475.0 0 3870501 148321 None code45 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 126.5 126.5 45.0 False None None False None False 5692.5 0 3870502 148321 None code46 Providing and laying water proofing treatment to the Retaining wall, water retaining structures outside with fully bonded 1.6mm Thick SBS modified self-adhesive, cross laminated HDPE Valero lining waterproofing membrane, conforming to IS 16471:2017 Type A, requirements of UG waterproofing structures, The SBS membrane shall have Mass per Unit Area greater than 1.8 Kg per Sq.meter as per ASTM D 5147, Puncture resistance greater than 200 N as per ASTM E 154, Elongation greater than 180% as per ASTM D 412-06, Tensile Strength greater than 4 Mpa as per ASTM D 412- 06, Tear resistance greater than 20 N/mm as per ASTM D 4073, Hydrostatic pressure greater than 50M as per DIN 1048. The lap with HDPE membrane shall be 100mm treated with TS tape. followed by the installation of 8-10mm THK polyethylene dimpled drain board having compressive strength greater than 400kN/m2 (as per ISO 25619-2). The finished cost includes surface preparation, making coving and a coat of solvent based bituminous primer @ 0.25l per sq.meter on entire surface before laying membrane completely as per specification. Sqm 1019.7 1019.7 357.588 False None None False None False 364632.4836 0 3870503 148321 None code47 Providing and fixing fire resistant door frame of section 143 x 57 mm having built in rebate made out of 16 SWG G.I. sheet (zinc coating not less than 120 gm/sqm) duly filled with vermuculite based concrete mix, suitable for mounting 60 minutes fire rated door shutters. The frame is fitted with intumuscent fire seal strip of size 10x4 mm (minimum) alround the frame and fixing with dash fastener of approved size and make, including applying a coat of approved brand fire resistant primer etc. complete as per direction of Engineer-in-charge (Dash fastener to bepaid for separately). Sqm 1239.61 1239.61 94.5 False None None False None False 117143.145 0 3870504 148321 None code48 Providing and fixing 50 mm thick glazed fire resistant door shutters of 60 minutes fire rating conforming to IS:3614 (Part-II), tested and certified as per laboratory approved by Engineer-in-charge, with suitable mounting on door frame, consisting of vertical styles, lock rail, top rail 100 mm wide, bottom rail 200 mm wide, made out of 16 SWG G.I.sheet (zinc coating not less than 120 gm/m2) duly filled FR insulation material and fixing with necessary stainless steel ball bearing hinges of approved make, including applying a coat of approved fire resistant primer etc. all complete as per direction of Engineer-in-charge (panneling to be paid for separately). Sqm 5461.82 5461.82 34.425 False None None False None False 188023.1535 0 1724827882000 1 None None Buildings Proposed Construction of KSIC Bhavan at Queens Road, Bangalore City. 8736967.35 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3870505 148322 None code01 GROUND FLOOR: Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes Form work, all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates - COLUMNS Cum 12796.41 12796.41 32.508 False None None False None False 415985.69628 0 3870506 148322 None code02 do - LIFT CORE WALL Cum 12796.41 12796.41 10.416 False None None False None False 133287.40656 0 3870507 148322 None code03 do - RCC BEAMS Cum 12043.68 12043.68 48.105 False None None False None False 579361.2264 0 3870508 148322 None code04 do - RCC SLAB Cum 11290.95 11290.95 66.325 False None None False None False 748872.25875 0 3870509 148322 None code05 do - RCC STAIRCASE Cum 11290.95 11290.95 5.8159 False None None False None False 65667.036105 0 3870510 148322 None code06 do - LINTELS Cum 12043.68 12043.68 4.554 False None None False None False 54846.91872 0 3870511 148322 None code07 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates.Including FormWork Cum 10574.85 10574.85 3.531 False None None False None False 37339.79535 0 3870512 148322 None code08 Providing lath plaster with cement mortar 1:3, 5cms thick with 6mm dia mild steel bars at 20 cms. c to c both horizontally and vertically fixed with chicken mesh for drop chajja,facia, backing to cup boards including cost of all materials, labour, providing and removing form work usage charges, curing, complete as per specifications. Sqm 1361.8 1361.8 5.4 False None None False None False 7353.72 0 3870513 148322 None code09 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Tonne 98501.7 98501.7 24.2654 False None None False None False 2390183.15118 0 3870514 148322 None code10 Extra for providing throating or drip moulding to RCC chejjas with plastering ( labour charges only ) as per specifications. Specification No . KBS Rmtr 36.3 36.3 40.2 False None None False None False 1459.26 0 3870515 148322 None code11 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. Sqm 1441.0 1441.0 415.72 False None None False None False 599052.52 0 3870516 148322 None code12 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. Sqm 1214.4 1214.4 74.3928 False None None False None False 90342.61632 0 3870517 148322 None code13 Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc. to be paid separately) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Sqm 5194.2 5194.2 11.28 False None None False None False 58590.576 0 3870518 148322 None code14 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification.-do- 35 mm thick both side Commercial Sqm 3654.2 3654.2 17.279 False None None False None False 63140.9218 0 3870519 148322 None code15 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. Cum 108696.5 108696.5 0.615 False None None False None False 66848.3475 0 3870520 148322 None code16 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. Nos 1117.6 1117.6 6.0 False None None False None False 6705.6 0 3870521 148322 None code17 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Handles 300mm No 605.0 605.0 12.0 False None None False None False 7260.0 0 3870522 148322 None code18 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Aldrop 16mm dia, 300mm No 412.5 412.5 6.0 False None None False None False 2475.0 0 3870523 148322 None code19 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Tower Bolts 200x10mm No 165.0 165.0 12.0 False None None False None False 1980.0 0 3870524 148322 None code20 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS hinges 100 mm No 77.0 77.0 24.0 False None None False None False 1848.0 0 3870525 148322 None code21 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Door stopper 75mm No 110.0 110.0 6.0 False None None False None False 660.0 0 3870526 148322 None code22 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. No 1157.2 1157.2 6.0 False None None False None False 6943.2 0 3870527 148322 None code23 Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Fastener with threaded dia 12 mm Nos 66.0 66.0 36.0 False None None False None False 2376.0 0 3870528 148322 None code24 Supplying and fixing new teak wood beads wherever necessary including cost of materials, labour, complete as per specifications. Rmtr 57.2 57.2 36.0 False None None False None False 2059.2 0 3870529 148322 None code25 Providing & fixing of 3 track x 2 panel sliding windows made out of multi chambered UPVC(Matching to RAL 9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets grey colour having isolated drainage and reinforced with Galvanized Iron profile through out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm to 2.5mm. Maximum possible size 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) Sqm 7407.4 7407.4 18.0 False None None False None False 133333.2 0 3870530 148322 None code26 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL 9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE (Thermo Plastic Elastomer) and lead free with gaskets grey colour having isolated drainage and reinforced with Galvanized Iron profile throughout the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) Sqm 6290.9 6290.9 12.15 False None None False None False 76434.435 0 3870531 148322 None code27 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding Kg 184.8 184.8 633.15 False None None False None False 117006.12 0 3870532 148322 None code28 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 850 kg/m3, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-InCharge. (Fixtures shall be paid for separately)Size 62 x 100mm m 772.2 772.2 44.8 False None None False None False 34594.56 0 3870533 148322 None code29 Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) having minimum density of 650 kg/m3 and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength of 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws The cost includes cost of materials, transportation, labour and fixing charges.(Cost of Fixtures to be paid separately)30 mm thickness Sqm 3833.5 3833.5 13.44 False None None False None False 51522.24 0 3870534 148322 None code30 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. Nos 1225.4 1225.4 16.0 False None None False None False 19606.4 0 3870535 148322 None code31 Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 80x1.25 mm M.S. laths with 1.25 mm thick top cover including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Sqm 2896.3 2896.3 7.1999 False None None False None False 20853.07037 0 3870536 148322 None code32 Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge... ( Inside) Sqm 343.2 343.2 420.846 False None None False None False 144434.3472 0 3870537 148322 None code33 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. Sqm 110.0 110.0 820.2379 False None None False None False 90226.169 0 3870538 148322 None code34 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.. ( Outside) Sqm 383.9 383.9 272.219 False None None False None False 104504.8741 0 3870539 148322 None code35 Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per direc- tions of Engineer-in-charge. Sqm 389.4 389.4 30.036 False None None False None False 11696.0184 0 3870540 148322 None code36 Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. ( length of mesh only be measured for payment.Plaster mesh 150mm wide Rmtr 41.8 41.8 4200.0 False None None False None False 175560.0 0 3870541 148322 None code37 Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge: 10mm to 15 mm wide and 8 mm deep groove. Rmtr 57.2 57.2 512.8 False None None False None False 29332.16 0 3870542 148322 None code38 Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 600x600 mm Sqm 1292.5 1292.5 168.839 False None None False None False 218224.4075 0 3870543 148322 None code39 Providing and laying Cement concrete flooring 40 mm thick with 20 mm nominal size stone aggregate using 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry complete. Sqm 496.1 496.1 100.0 False None None False None False 49610.0 0 3870544 148322 None code40 Providing and laying Polished Glazed Vitrified tiles with thickness 10 mm in floor with different sizes with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).Size of Tile 600x600 mm Sqm 1458.6 1458.6 95.52 False None None False None False 139325.472 0 3870545 148322 None code41 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. ** Polished Granite stone slab Black, Cat Eye, River Pink or equivalent. Sqm 3137.2 3137.2 23.285 False None None False None False 73049.702 0 3870546 148322 None code42 Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints fin- ished with cement mortar 1:3 over existing cement concrete bed , including cost of materials, mortar, labour, curing complete as per specifications. Sqm 5860.8 5860.8 19.439 False None None False None False 113928.0912 0 3870547 148322 None code43 Providing and laying Black Lapotra Granite stone flooring in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Sqm 2840.2 2840.2 55.1475 False None None False None False 156629.9295 0 3870548 148322 None code44 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 324.5 324.5 193.608 False None None False None False 62825.796 0 3870549 148322 None code45 Providing and supplying crystalline integral concrete waterproofing admixture that waterproofs concrete by forming crystals deep in the pores, capillaries and microcracks of the concrete, self-seal waterproofing compound to bridge shrinkage cracks upto 0.5mm in width & resist hydro-static pressure upto 16bar for both positive & negative pressure confirming to DIN 1048 part 5 for 56% reduction in depth of penetration against control, resistance to chloride penetration confirming to ASTM C 1202 with 64% improvement against control & protecting steel re-inforcement against corrosion mixed @ 1% by weight of cementitious content in concrete. ie., integral crystaline waterproofing admix @ 0.5 kg/bag of cement. (For calculation purpose 320 kg of Cement for M-20 grade of Concrete is considered in the analysis) Sqm 676.5 676.5 32.815 False None None False None False 22199.3475 0 3870550 148322 None code46 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thick- ness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete. Sqm 977.9 977.9 19.084 False None None False None False 18662.2436 0 3870551 148322 None code47 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. Sqm 1593.9 1593.9 98.088 False None None False None False 156342.4632 0 3870552 148322 None code48 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Sqm 621.5 621.5 455.7 False None None False None False 283217.55 0 3870553 148322 None code49 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 139.7 139.7 820.2379 False None None False None False 114587.23463 0 3870554 148322 None code50 Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 g/L and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 L/ 10 m². Over and including priming coat of exterior primer applied @ 0.90 L/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 171.6 171.6 272.219 False None None False None False 46712.7804 0 3870555 148322 None code51 Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 L/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 311.3 311.3 272.219 False None None False None False 84741.7747 0 3870556 148322 None code52 Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 55.0 55.0 30.15 False None None False None False 1658.25 0 3870557 148322 None code53 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 126.5 126.5 30.15 False None None False None False 3813.975 0 3870558 148322 None code54 Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 58.3 58.3 41.4719 False None None False None False 2417.81177 0 3870559 148322 None code55 Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below: 1. The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of 160/180 no. 2. Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs. 3. On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs.4. On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final melamine polish is applied with compressor pressure spray gun using melamine clear polish and melamine thinner mixed in required proportion complete as per direction of Engineer-in-Charge. (Final coat to be done in 1 or 2 layers without gap of time.) Sqm 744.7 744.7 41.4719 False None None False None False 30884.12393 0 3870560 148322 None code56 Providing and supplying aluminium extruded tubular and other alu- minium sections as per the architectural drawings and approved draw- ings of Chief Architect, GoK.The aluminium quality shall be as per grade 6063 T5 or T6 as per BS 1474,including super durable powder coating of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge. ( The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid on this account).The weight of aluminium extruded section shall be taken for purpose of payment. Kg 447.7 447.7 275.73 False None None False None False 123444.321 0 3870561 148322 None code57 Providing, assembling and supplying vision glass panels (IGUs) comprising of hermetically sealed 6 12 6 mm insulated glass (double glazed) vision panel units of size and shape as required and specified, comprising of an outer heat strengthened float glass 6mm thick, of approved colour and shade with reflective soft coating on surface 2 of approved colour and shade, an inner Heat strengthned clear float glass 6mm thick, spacer tube 12mm wide, dessicants, including primary seal and secondary seal (structural silicone sealant) etc. all complete for the required performances, as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineer in Charge. The IGUs shall be assembled in the factory/ workshop of the glass processor. (Payment for fixing of IGU Panels in the curtain glazing is included in cost of item No.18.2)For payment, only the actual area of glass on face 1 of the glass panels (excluding the areas of the grooves and weather silicone sealant) provided and fixed in position, shall be measured in square meter .(1) Coloured tinted float glass 6mm thick substrate with reflective soft coating on face 2, + 12mm Airgap + 6mm Heat Strengthened clear Glass of approved make having properties as visible Light transmittance (VLT) of 25 to 35 %, Light reflection internal 10 to 15%, light reflection external 10 to 20 %, shading coefficient (0.25-0.28) and U value of 3.0 to 3.3 W/ m2 degree K etc. The properties of performance glass shall be decided by technical sanctioning authority as per the site requirement. Sqm 3347.3 3347.3 42.42 False None None False None False 141992.466 0 3870562 148322 None code58 Extra for openable side / top hung vision glass panels (IGUs) including providing and supplying at site all accessories and hardwares for the openable panels as specified and of the approved make such as heavy duty stainless steel friction hinges, min 4 -point cremone locking sets with stainless steel plates, handles, buffers etc. including necessary stainless steel screws/ fasteners, nuts, bolts, washers etc. all complete as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineer- in-Charge. Sqm 4573.8 4573.8 42.42 False None None False None False 194020.596 0 3870563 148322 None code59 Providing & fixing 10 mm thick plaster of Paris (gypsum anhydrous) ceiling up to a height of 5 m above floor level, over first class kail wood strips 25x6 mm with 10 mm gap in between and reinforced with rabbit wire mesh fixed to wooden frame. Flat surfaces Sqm 1401.4 1401.4 63.56 False None None False None False 89072.984 0 3870564 148322 None code60 Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per m2 including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross “T” of size 24x28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between main’T’ at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross ‘T’ of length 600 mm and size 24 x28 mm made of 0.33 mm thick (Minimum) sheet to be inter locked at middle of the 1200x 600 mm panel to from grid of size 600x600 mm, resting on periphery walls /partitions on a Perimeter wall angle pre-coated steel of size(24x24X3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm interval and laying 15 mm thick densified edges calicum silicate ceiling tiles of approved texture in the grid, including, cutting/ making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required. Main ‘T’ runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm G.I. adjustable rods with galvanised steel level clips of size 85 x 30 x 0.8 mm, spaced at 1200 mm centre to centre along main ‘T’, bottom exposed with 24 mm of all T sections shall be pre-painted with polyster baked paint, for all heights, as per specifications, drawings and as directed by Engineer-in-Charge. Sqm 1862.3 1862.3 95.34 False None None False None False 177551.682 0 3870565 148322 None code61 Providing and fixing of Openable door made out of multi chambered UPVC(Matching to RAL 9016) sections and with minimum T O2(Titanium Dioxide) at 6PHR with TPV(Thermo Plastic Vulcanized) and lead free with gaskets grey colour having isolated drainage and reinforced with Galvanized Iron profile throughout the openable frame. The frame having overall size of 60mm x 55mm with GI reinforcement of 1mm thickness and openable sash with overall size of 60mm x 102mm and GI reinforcement of 2mm thickness. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 34 mm. Windows shall be provided with 6mm plain float glass, Standard hardware with 2D or 3D hinge and Multi point locking system with Handle. Wall thickness of frame and sash shall be of 2mm to 2.5mm. Maximum possible size 900mm x 2400mm. (The cost is inclusive of all fixtures and separate charges for minor T&Ps shall not be made) Sqm 6869.5 6869.5 11.4 False None None False None False 78312.3 0 1724827882000 0 None None Buildings Proposed Construction of KSIC Bhavan at Queens Road, Bangalore City. 8790599.43 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3870566 148323 None code1 SECOND FLOOR : Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes Form work, all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates - COLUMNS Cum 13052.33 13052.33 32.508 False None None False None False 424305.14364 0 3870567 148323 None code2 do - LIFT CORE WALL Cum 13052.33 13052.33 10.416 False None None False None False 135953.06928 0 3870568 148323 None code3 do - RCC BEAMS Cum 12284.55 12284.55 46.297 False None None False None False 568737.81135 0 3870569 148323 None code4 do - RCC SLAB Cum 11516.76 11516.76 60.939 False None None False None False 701819.83764 0 3870570 148323 None code5 do - RCC STAIRCASE Cum 11516.76 11516.76 3.7395 False None None False None False 43066.92402 0 3870571 148323 None code6 do - LINTELS Cum 12284.55 12284.55 4.5329 False None None False None False 55684.636695 0 3870572 148323 None code7 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates.Including FormWork Cum 10786.34 10786.34 3.3646 False None None False None False 36291.719564 0 3870573 148323 None code8 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Tonne 100471.73 100471.73 21.5118 False None None False None False 2161327.761414 0 3870574 148323 None code9 Extra for providing throating or drip moulding to RCC chejjas with plastering ( labour charges only ) as per specifications. Specification No . KBS Rmtr 37.02 37.02 38.7 False None None False None False 1432.674 0 3870575 148323 None code10 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. Sqm 1469.82 1469.82 395.004 False None None False None False 580584.77928 0 3870576 148323 None code11 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. Sqm 1238.68 1238.68 113.778 False None None False None False 140934.53304 0 3870577 148323 None code12 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification.-do- 35 mm thick both side Commercial Sqm 3727.28 3727.28 22.68 False None None False None False 84534.7104 0 3870578 148323 None code13 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. Cum 110870.43 110870.43 0.6749 False None None False None False 74826.453207 0 3870579 148323 None code14 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. Nos 1139.95 1139.95 9.0 False None None False None False 10259.55 0 3870580 148323 None code15 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Handles 300mm No 617.1 617.1 18.0 False None None False None False 11107.8 0 3870581 148323 None code16 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Aldrop 16mm dia, 300mm No 420.75 420.75 9.0 False None None False None False 3786.75 0 3870582 148323 None code17 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Tower Bolts 200x10mm No 168.3 168.3 18.0 False None None False None False 3029.4 0 3870583 148323 None code18 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS hinges 100 mm No 78.54 78.54 36.0 False None None False None False 2827.44 0 3870584 148323 None code19 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Door stopper 75mm No 112.2 112.2 9.0 False None None False None False 1009.8 0 3870585 148323 None code20 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. No 1180.34 1180.34 9.0 False None None False None False 10623.06 0 3870586 148323 None code21 Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Fastener with threaded dia 12 mm Nos 67.32 67.32 54.0 False None None False None False 3635.28 0 3870587 148323 None code22 Supplying and fixing new teak wood beads wherever necessary including cost of materials, labour, complete as per specifications. Rmtr 58.34 58.34 52.6499 False None None False None False 3071.595166 0 3870588 148323 None code23 Providing & fixing of 3 track x 2 panel sliding windows made out of multi chambered UPVC(Matching to RAL 9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets grey colour having isolated drainage and reinforced with Galvanized Iron profile through out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm to 2.5mm. Maximum possible size 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) Sqm 7555.54 7555.54 32.4 False None None False None False 244799.496 0 3870589 148323 None code24 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL 9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE (Thermo Plastic Elastomer) and lead free with gaskets grey colour having isolated drainage and reinforced with Galvanized Iron profile throughout the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) Sqm 6416.71 6416.71 2.025 False None None False None False 12993.83775 0 3870590 148323 None code25 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding Kg 188.49 188.49 722.925 False None None False None False 136264.13325 0 3870591 148323 None code26 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 850 kg/m3, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-InCharge. (Fixtures shall be paid for separately)Size 62 x 100mm m 787.64 787.64 19.2 False None None False None False 15122.688 0 3870592 148323 None code27 Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) having minimum density of 650 kg/m3 and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength of 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws The cost includes cost of materials, transportation, labour and fixing charges.(Cost of Fixtures to be paid separately)30 mm thickness Sqm 3910.17 3910.17 5.76 False None None False None False 22522.5792 0 3870593 148323 None code28 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. Nos 1249.9 1249.9 19.0 False None None False None False 23748.1 0 3870594 148323 None code29 Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge... ( Inside) Sqm 350.06 350.06 721.998 False None None False None False 252742.61988 0 3870595 148323 None code30 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. Sqm 112.2 112.2 1087.9574 False None None False None False 122068.82028 0 3870596 148323 None code31 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.. ( Outside) Sqm 391.57 391.57 227.111 False None None False None False 88929.85427 0 3870597 148323 None code32 Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per direc- tions of Engineer-in-charge. Sqm 397.18 397.18 18.7849 False None None False None False 7460.986582 0 3870598 148323 None code33 Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. ( length of mesh only be measured for payment.Plaster mesh 150mm wide Rmtr 42.63 42.63 4200.0 False None None False None False 179046.0 0 3870599 148323 None code34 Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge: 10mm to 15 mm wide and 8 mm deep groove. Rmtr 58.34 58.34 512.8 False None None False None False 29916.752 0 3870600 148323 None code35 Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 600x600 mm Sqm 1318.35 1318.35 342.953 False None None False None False 452132.08755 0 3870601 148323 None code36 Providing and laying Polished Glazed Vitrified tiles with thickness 10 mm in floor with different sizes with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).Size of Tile 600x600 mm Sqm 1487.77 1487.77 22.32 False None None False None False 33207.0264 0 3870602 148323 None code37 Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints fin- ished with cement mortar 1:3 over existing cement concrete bed , including cost of materials, mortar, labour, curing complete as per specifications. Sqm 5978.01 5978.01 19.4399 False None None False None False 116211.916599 0 3870603 148323 None code38 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 330.99 330.99 153.984 False None None False None False 50967.16416 0 3870604 148323 None code39 Providing and supplying crystalline integral concrete waterproofing admixture that waterproofs concrete by forming crystals deep in the pores, capillaries and microcracks of the concrete, self-seal waterproofing compound to bridge shrinkage cracks upto 0.5mm in width & resist hydro-static pressure upto 16bar for both positive & negative pressure confirming to DIN 1048 part 5 for 56% reduction in depth of penetration against control, resistance to chloride penetration confirming to ASTM C 1202 with 64% improvement against control & protecting steel re-inforcement against corrosion mixed @ 1% by weight of cementitious content in concrete. ie., integral crystaline waterproofing admix @ 0.5 kg/bag of cement. (For calculation purpose 320 kg of Cement for M-20 grade of Concrete is considered in the analysis) Sqm 690.03 690.03 46.5962 False None None False None False 32152.775886 0 3870605 148323 None code40 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thick- ness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete. Sqm 997.45 997.45 29.5082 False None None False None False 29432.95409 0 3870606 148323 None code41 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. Sqm 1625.77 1625.77 131.664 False None None False None False 214055.38128 0 3870607 148323 None code42 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Kg 633.93 633.93 176.39 False None None False None False 111818.9127 0 3870608 148323 None code43 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 142.49 142.49 1087.9574 False None None False None False 155023.049926 0 3870609 148323 None code44 Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 g/L and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 L/ 10 m². Over and including priming coat of exterior primer applied @ 0.90 L/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 175.03 175.03 227.111 False None None False None False 39751.23833 0 3870610 148323 None code45 Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 L/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 317.52 317.52 227.1119 False None None False None False 72112.570488 0 3870611 148323 None code46 Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 56.1 56.1 34.425 False None None False None False 1931.2425 0 3870612 148323 None code47 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 129.03 129.03 34.425 False None None False None False 4441.85775 0 3870613 148323 None code48 Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 59.46 59.46 54.4319 False None None False None False 3236.520774 0 3870614 148323 None code49 Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below: 1. The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of 160/180 no. 2. Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs. 3. On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs.4. On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final melamine polish is applied with compressor pressure spray gun using melamine clear polish and melamine thinner mixed in required proportion complete as per direction of Engineer-in-Charge. (Final coat to be done in 1 or 2 layers without gap of time.) Sqm 759.59 759.59 54.4319 False None None False None False 41345.926921 0 3870615 148323 None code50 Providing and supplying aluminium extruded tubular and other alu- minium sections as per the architectural drawings and approved draw- ings of Chief Architect, GoK.The aluminium quality shall be as per grade 6063 T5 or T6 as per BS 1474,including super durable powder coating of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge. ( The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid on this account).The weight of aluminium extruded section shall be taken for purpose of payment. Kg 456.65 456.65 607.152 False None None False None False 277255.9608 0 3870616 148323 None code51 Providing, assembling and supplying vision glass panels (IGUs) comprising of hermetically sealed 6 12 6 mm insulated glass (double glazed) vision panel units of size and shape as required and specified, comprising of an outer heat strengthened float glass 6mm thick, of approved colour and shade with reflective soft coating on surface 2 of approved colour and shade, an inner Heat strengthned clear float glass 6mm thick, spacer tube 12mm wide, dessicants, including primary seal and secondary seal (structural silicone sealant) etc. all complete for the required performances, as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineer in Charge. The IGUs shall be assembled in the factory workshop of the glass processor. (Payment for fixing of IGU Panels in the curtain glazing is included in cost of item No.18.2)For payment, only the actual area of glass on face 1 of the glass panels (excluding the areas of the grooves and weather silicone sealant) provided and fixed in position, shall be measured in m2.(i) Coloured tinted float glass 6mm thick substrate with reflective soft coating on face 2, + 12mm Airgap + 6mm Heat Strengthened clear Glass of approved make having properties as visible Light transmittance (VLT) of 25 to 35 %, Light reflection internal 10 to 15%, light reflection external 10 to 20 %, shading coefficient (0.25-0.28) and U value of 3.0 to 3.3 W/ m2 degree K etc. The properties of performance glass shall be decided by technical sanctioning authority as per the site requirement. Sqm 3414.24 3414.24 93.408 False None None False None False 318917.32992 0 3870617 148323 None code52 Extra for openable side / top hung vision glass panels (IGUs) including providing and supplying at site all accessories and hardwares for the openable panels as specified and of the approved make such as heavy duty stainless steel friction hinges, min 4 -point cremone locking sets with stainless steel plates, handles, buffers etc. including necessary stainless steel screws/ fasteners, nuts, bolts, washers etc. all complete as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineer- in-Charge. Sqm 4665.27 4665.27 93.408 False None None False None False 435773.54016 0 3870618 148323 None code53 Providing & fixing 10 mm thick plaster of Paris (gypsum anhydrous) ceiling up to a height of 5 m above floor level, over first class kail wood strips 25x6 mm with 10 mm gap in between and reinforced with rabbit wire mesh fixed to wooden frame. Flat surfaces Sqm 1429.42 1429.42 37.2712 False None None False None False 53276.198704 0 3870619 148323 None code54 Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per m2 including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross “T” of size 24x28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between main’T’ at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross ‘T’ of length 600 mm and size 24 x28 mm made of 0.33 mm thick (Minimum) sheet to be inter locked at middle of the 1200x 600 mm panel to from grid of size 600x600 mm, resting on periphery walls /partitions on a Perimeter wall angle pre-coated steel of size(24x24X3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm interval and laying 15 mm thick densified edges calicum silicate ceiling tiles of approved texture in the grid, including, cutting/ making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required. Main ‘T’ runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm G.I. adjustable rods with galvanised steel level clips of size 85 x 30 x 0.8 mm, spaced at 1200 mm centre to centre along main ‘T’, bottom exposed with 24 mm of all T sections shall be pre-painted with polyster baked paint, for all heights, as per specifications, drawings and as directed by Engineer-in-Charge. Sqm 1899.54 1899.54 55.9068 False None None False None False 106197.202872 0 3870620 148323 None code55 Providing and laying Gypsum panel partitions 100 mm thick with water proof Gypsum panels of size 666x500x100 mm, made of calcite phosphor Gypsum fixed with tongue and groove, jointed with bonding plaster as per manufacturer’s specifications in superstructure above plinth level up to floor I level. Gypsum blocks will have a minimum compressive strength of 9.3 kg/cm2 including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. Sqm 918.91 918.91 51.03 False None None False None False 46891.9773 0 1724827882000 1 None None Buildings Proposed Construction of KSIC Bhavan at Queens Road, Bangalore City. 6915253.06 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3870621 148324 None code1 TERRACE FLOOR: Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes Form work, all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates - COLUMNS Cum 13180.3 13180.3 19.253 False None None False None False 253760.3159 0 3870622 148324 None code2 do - LIFT CORE WALL Cum 13180.3 13180.3 10.416 False None None False None False 137286.0048 0 3870623 148324 None code3 do - RCC BEAMS Cum 12404.99 12404.99 18.1851 False None None False None False 225585.983649 0 3870624 148324 None code4 do - RCC SLAB Cum 11629.67 11629.67 14.924 False None None False None False 173561.19508 0 3870625 148324 None code5 do - LINTELS Cum 12404.99 12404.99 2.4414 False None None False None False 30285.542586 0 3870626 148324 None code6 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates.Including FormWork Cum 10892.09 10892.09 1.1937 False None None False None False 13001.887833 0 3870627 148324 None code7 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Tonne 101456.75 101456.75 9.663 False None None False None False 980376.57525 0 3870628 148324 None code8 Extra for providing throating or drip moulding to RCC chejjas with plastering ( labour charges only ) as per specifications. Specification No . KBS Rmtr 37.38 37.38 11.4 False None None False None False 426.132 0 3870629 148324 None code9 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. Sqm 1484.23 1484.23 206.986 False None None False None False 307214.83078 0 3870630 148324 None code10 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. Sqm 1250.83 1250.83 86.136 False None None False None False 107741.49288 0 3870631 148324 None code11 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification.-do- 35 mm thick both side Commercial Sqm 3763.82 3763.82 13.32 False None None False None False 50134.0824 0 3870632 148324 None code12 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. Cum 111957.39 111957.39 0.38 False None None False None False 42543.8082 0 3870633 148324 None code13 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. Nos 1151.12 1151.12 5.0 False None None False None False 5755.6 0 3870634 148324 None code14 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Handles 300mm No 623.15 623.15 10.0 False None None False None False 6231.5 0 3870635 148324 None code15 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Aldrop 16mm dia, 300mm No 424.87 424.87 5.0 False None None False None False 2124.35 0 3870636 148324 None code16 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Tower Bolts 200x10mm No 169.95 169.95 10.0 False None None False None False 1699.5 0 3870637 148324 None code17 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS hinges 100 mm No 79.31 79.31 20.0 False None None False None False 1586.2 0 3870638 148324 None code18 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Door stopper 75mm No 113.3 113.3 5.0 False None None False None False 566.5 0 3870639 148324 None code19 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. No 1191.91 1191.91 5.0 False None None False None False 5959.55 0 3870640 148324 None code20 Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Fastener with threaded dia 12 mm Nos 67.98 67.98 30.0 False None None False None False 2039.4 0 3870641 148324 None code21 Supplying and fixing new teak wood beads wherever necessary including cost of materials, labour, complete as per specifications. Rmtr 58.91 58.91 29.549 False None None False None False 1740.73159 0 3870642 148324 None code22 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm to2.5mm. Maximum possible size 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) Sqm 7629.62 7629.62 7.199 False None None False None False 54925.63438 0 3870643 148324 None code23 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) Sqm 6479.62 6479.62 1.35 False None None False None False 8747.487 0 3870644 148324 None code24 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding Kg 190.34 190.34 179.549 False None None False None False 34175.35666 0 3870645 148324 None code25 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 850 kg/m3, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-InCharge. (Fixtures shall be paid for separately)Size 62 x 100mm m 795.36 795.36 19.2 False None None False None False 15270.912 0 3870646 148324 None code26 Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) having minimum density of 650 kg/m3 and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength of 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws The cost includes cost of materials, transportation, labour and fixing charges.(Cost of Fixtures to be paid separately)30 mm thickness Sqm 3948.5 3948.5 5.76 False None None False None False 22743.36 0 3870647 148324 None code27 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. Nos 1262.16 1262.16 15.0 False None None False None False 18932.4 0 3870648 148324 None code28 Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge... ( Inside) Sqm 353.49 353.49 439.083 False None None False None False 155211.44967 0 3870649 148324 None code29 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. Sqm 113.3 113.3 538.583 False None None False None False 61021.4539 0 3870650 148324 None code30 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.. ( Outside) Sqm 395.41 395.41 253.035 False None None False None False 100052.56935 0 3870651 148324 None code31 Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. ( length of mesh only be measured for payment.Plaster mesh 150mm wide Rmtr 43.05 43.05 4200.0 False None None False None False 180810.0 0 3870652 148324 None code32 Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge: 10mm to 15 mm wide and 8 mm deep groove. Rmtr 58.91 58.91 344.8 False None None False None False 20312.168 0 3870653 148324 None code33 Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 600x600 mm Sqm 1331.27 1331.27 181.3 False None None False None False 241359.251 0 3870654 148324 None code34 Providing and laying Polished Glazed Vitrified tiles with thickness 10 mm in floor with different sizes with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).Size of Tile 600x600 mm Sqm 1502.35 1502.35 27.9 False None None False None False 41915.565 0 3870655 148324 None code35 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 334.23 334.23 159.564 False None None False None False 53331.07572 0 3870656 148324 None code36 Providing and supplying crystalline integral concrete waterproofing admixture that waterproofs concrete by forming crystals deep in the pores, capillaries and microcracks of the concrete, self-seal waterproofing compound to bridge shrinkage cracks upto 0.5mm in width & resist hydro-static pressure upto 16bar for both positive & negative pressure confirming to DIN 1048 part 5 for 56% reduction in depth of penetration against control, resistance to chloride penetration confirming to ASTM C 1202 with 64% improvement against control & protecting steel re-inforcement against corrosion mixed @ 1% by weight of cementitious content in concrete. ie., integral crystaline waterproofing admix @ 0.5 kg/bag of cement. (For calculation purpose 320 kg of Cement for M-20 grade of Concrete is considered in the analysis) Sqm 696.79 696.79 46.596 False None None False None False 32467.62684 0 3870657 148324 None code37 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thick- ness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete. Sqm 1007.23 1007.23 29.5082 False None None False None False 29721.544286 0 3870658 148324 None code38 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. Sqm 1641.71 1641.71 131.664 False None None False None False 216154.10544 0 3870659 148324 None code39 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 143.89 143.89 538.583 False None None False None False 77496.70787 0 3870660 148324 None code40 Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 g/L and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 L/ 10 m². Over and including priming coat of exterior primer applied @ 0.90 L/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 176.74 176.74 253.035 False None None False None False 44721.4059 0 3870661 148324 None code41 Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 L/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 320.63 320.63 253.035 False None None False None False 81130.61205 0 3870662 148324 None code42 Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 56.65 56.65 8.549 False None None False None False 484.30085 0 3870663 148324 None code43 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 130.29 130.29 8.549 False None None False None False 1113.84921 0 3870664 148324 None code44 Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 60.04 60.04 31.967 False None None False None False 1919.29868 0 3870665 148324 None code45 Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below: 1. The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of 160/180 no. 2. Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs. 3. On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs.4. On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final melamine polish is applied with compressor pressure spray gun using melamine clear polish and melamine thinner mixed in required proportion complete as per direction of Engineer-in-Charge. (Final coat to be done in 1 or 2 layers without gap of time.) Sqm 767.04 767.04 31.967 False None None False None False 24519.96768 0 3870666 148324 None code46 Providing and supplying aluminium extruded tubular and other alu- minium sections as per the architectural drawings and approved draw- ings of Chief Architect, GoK.The aluminium quality shall be as per grade 6063 T5 or T6 as per BS 1474,including super durable powder coating of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge. ( The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid on this account).The weight of aluminium extruded section shall be taken for purpose of payment. Kg 461.13 461.13 131.04 False None None False None False 60426.4752 0 3870667 148324 None code47 Providing, assembling and supplying vision glass panels (IGUs) comprising of hermetically sealed 6 12 6 mm insulated glass (double glazed) vision panel units of size and shape as required and specified, comprising of an outer heat strengthened float glass 6mm thick, of approved colour and shade with reflective soft coating on surface 2 of approved colour and shade, an inner Heat strengthned clear float glass 6mm thick, spacer tube 12mm wide, dessicants, including primary seal and secondary seal (structural silicone sealant) etc. all complete for the required performances, as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineer-in-Charge. The IGUs shall be assembled in the factory workshop of the glass processor. (Payment for fixing of IGU Panels in the curtain glazing is included in cost of item No.18.2)For payment, only the actual area of glass on face 1 of the glass panels (excluding the areas of the grooves and weather silicone sealant) provided and fixed in position, shall be measured in square meter.(i) Coloured tinted float glass 6mm thick substrate with reflective soft coating on face 2, + 12mm Airgap + 6mm Heat Strengthened clear Glass of approved make having properties as visible Light transmittance (VLT) of 25 to 35 %, Light reflection internal 10 to 15%, light reflection external 10 to 20 %, shading coefficient (0.25 to 0.28) and U value of 3.0 to 3.3 W square metre degree K etc. The properties of performance glass shall be decided by technical sanctioning authority as per the site requirement Sqm 3447.71 3447.71 20.16 False None None False None False 69505.8336 0 3870668 148324 None code48 Extra for openable side / top hung vision glass panels (IGUs) including providing and supplying at site all accessories and hardwares for the openable panels as specified and of the approved make such as heavy duty stainless steel friction hinges, min 4 -point cremone locking sets with stainless steel plates, handles, buffers etc. including necessary stainless steel screws/ fasteners, nuts, bolts, washers etc. all complete as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineer- in-Charge. Sqm 4711.01 4711.01 20.16 False None None False None False 94973.9616 0 3870669 148324 None code49 Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished seamless type tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Sqm 166.55 166.55 11141.64 False None None False None False 1855640.142 0 3870670 148324 None code50 Providing,fabricating and fixing Profiled Poly Urethane insulated Roof(PUF Sheet) having modular density 40kg/m2 and size 1.06m width and 7.60m length sheets roof having external sheet of 0.5mm steel, bottom sheet of 0.40mm steel with powder coated finish. The precoated sheet shall be of minimum 240MPa steel conforming to IS 14246 : 1995 and shal have zinc coating with minimum 120gsm as per IS 277:1992,.The roofing system shall have suitable water proof over lapping arrangments and GRIHA ceritifed.The fasting shall be of self tapping screws of required length with PVC head along with washer pre-painted aluminium cap unit with build in seal arrangments. The entire roof shall be firmly fastened to the existng frame including all lead and lifts, loading & unloading ,usage charges of machinery and equipments, transportation charges,labour charges and all other incidental charges etc.,complete as per standard technical detailed specifications and as directed by the Engineer in charge of the work.30mm thickness Sqm 2490.33 2490.33 181.41 False None None False None False 451770.7653 0 3870671 148324 None code51 Newly Constructed Roof/Podium with PU Waterproof coating - Above 500 square meter Providing and Applying single component Polyurethane based cold applied seamless waterproofing coating to the RCC surface like Roof & Podium area applied 2.4kg/m2 in 3 coats to achieve 1.5mm DFT, including a prime coat of solvent free, medium viscous, epoxy primer @0.2L/m2 and protection with 120gsm Geo-textile over the 7 days cured waterproofing membrane. The Waterproofing material shall have Solids greater than 85%, Tensile strength greater than2 Mpa as per ASTM D 412, Elongation at break greater than400% confirms to ASTM C 1305 for crack bridging ability (no cracks up to 3.2mm) Shore A Hardness greater than 55 as per ASTM D 2240, Adhesion to peel after water immersion as per ASTM C 794 at 5.2N. Resistance to root penetration as per UNE CN/ TS 14416. The finished cost to include surface preparation, making coving of 50 mm X 50mm at all right angles of wall Junction with Polymer Repair Mortar and lay 60gsm Geo-textile over the angle fillet when the first coat in still wet, treatment of cracks completely as per specification. Sqm 1319.94 1319.94 390.0 False None None False None False 514776.6 0 1724827882000 1 None None Buildings Proposed Construction of KSIC Bhavan at Queens Road, Bangalore City. 4553635.27 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3870672 148325 None code1 SUMP TANK: Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, including removal and disposal of top organic soil not exceeding 150 mm in thickness.By Mechanical Means using Dozer In area of light jungle Sqm 432.3 432.3 1.809 False None None False None False 782.0307 0 3870673 148325 None code2 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work 1.14.1 In all kinds of soils Depth upto 3 m. Cum 112.2 112.2 434.3 False None None False None False 48728.46 0 3870674 148325 None code3 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work 1.14.2 In all kinds of soils Depth upto 3 m to 6M Cum 128.7 128.7 72.384 False None None False None False 9315.8208 0 3870675 148325 None code4 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In ordinary/soft rock without blasting upto 1.5 m depth Cum 399.3 399.3 54.288 False None None False None False 21677.1984 0 3870676 148325 None code5 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work Depth exceeding 1.5 m, but not exceeding 3 m Cum 467.5 467.5 54.288 False None None False None False 25379.64 0 3870677 148325 None code6 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work Depth exceeding 1.5 m, but not exceeding 3 m to 4.5M Cum 467.5 467.5 18.096 False None None False None False 8459.88 0 3870678 148325 None code7 Loading and Unloading of Stone Boulder/Stone aggregates/Sand/ Kankar/Moorum. (Tipper 5.5 m3) Cum 148.5 148.5 176.672 False None None False None False 26235.792 0 3870679 148325 None code8 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. Cum 292.6 292.6 506.688 False None None False None False 148256.9088 0 3870680 148325 None code9 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications.Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates. Including FormWork Cum 6587.9 6587.9 18.096 False None None False None False 119214.6384 0 3870681 148325 None code10 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. Including FormWork - FOOTING Cum 7178.68 7178.68 30.952 False None None False None False 222194.50336 0 3870682 148325 None code11 do - WALLS Cum 11848.32 11848.32 40.68 False None None False None False 481989.6576 0 3870683 148325 None code12 do - SLAB Cum 10454.4 10454.4 45.28 False None None False None False 473375.232 0 3870684 148325 None code13 do - ROOF BEAM Cum 11151.36 11151.36 4.716 False None None False None False 52589.81376 0 3870685 148325 None code14 do - RCC STAIRCASE Cum 10454.4 10454.4 4.138 False None None False None False 43260.3072 0 3870686 148325 None code15 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates.Including FormWork Cum 10574.85 10574.85 0.278 False None None False None False 2939.8083 0 3870687 148325 None code16 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification.All other type of structures Tonne 86912.1 86912.1 11.264 False None None False None False 978977.8944 0 3870688 148325 None code17 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. Sqm 1441.0 1441.0 97.24 False None None False None False 140122.84 0 3870689 148325 None code18 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in- Charge. Sqm 4925.8 4925.8 4.2 False None None False None False 20688.36 0 3870690 148325 None code19 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding Kg 184.8 184.8 75.6 False None None False None False 13970.88 0 3870691 148325 None code20 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) Sqm 7407.4 7407.4 3.599 False None None False None False 26659.2326 0 3870692 148325 None code21 UGT/OHT (inside) waterproofing with Anti microbial Coating Providing and Applying two component, water based food grade epoxy resin coating on inside surface of Potable water tank having anti algae, antifungal, Non toxic, hygiene cum damp-proof coating Certified by CFTRI as per 21 CFR 175 300 of US FDA, having mixing Ratio (Base: Hardener: Water) 1:1:1 to be applied @ 0.35 Kg/m2 in 2 coats. Ensure that this coating is applied over the protective plaster, and that Item No. 4 is completed across the entire surface prior to applying the protective plaster. The Waterproofing material shall have Specific Gravity: 1.2, Water vapor permeance: 244.48 g/m2/24 hrs, as per IS 7809/Pt 2/1977, Adhesion strength: 2 N/mm2 as per ASTM D 4541: 02. The finished cost to include surface preparation completely as per specification. Sqm 1840.3 1840.3 657.79 False None None False None False 1210530.937 0 3870693 148325 None code22 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 408.1 408.1 867.79 False None None False None False 354145.099 0 3870694 148325 None code23 Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 55.0 55.0 7.8 False None None False None False 429.0 0 3870695 148325 None code24 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 126.5 126.5 7.8 False None None False None False 986.7 0 3870696 148325 None code25 Providing White washing with lime to give an even shade :New work (three coats) with lime of approved quality, including cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 28.6 28.6 867.79 False None None False None False 24818.794 0 3870697 148325 None code26 Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 97.9 97.9 867.79 False None None False None False 84956.641 0 3870698 148325 None code27 Providing & fixing 455x610 mm cast iron cover with frame weight to be not less 38kgs (weight of cover 23 kgs and weight of frame 15 kgs)and necessary locking arrangements with M.S flats 32x6 mm etc & painting with two or more coats with black Japan paint etc. complete as directed by the engineer-in-charge. Nos 2158.2 2158.2 6.0 False None None False None False 12949.2 0 1724827882000 0 None None Buildings Proposed Construction of KSIC Bhavan at Queens Road, Bangalore City. 364695.44 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3870699 148326 None code1 BOREWELL: Geophysical investigation at site for sinking borewells for Providing drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical sounding by adopting Venner or Schlumbergers's method, including reconnaissance survey of geological formation. Geophysical investigation of existing ground water in the vicinity, its quality, quantity and acceptability of the users, indic ting the location of the site, recommended depth of casing pipe required seal the top unconsolidated formation including an extra depth of 1.0 metre in consolidated formation for proper seating of casin pipe, depth of drilling required to cover full depth of aquifer proposed to be tapped, probable yield and other information required including transportation of instruments and accessories to work site, engaging techn al personal and labour required etc. NOTE: 1) Additional rate on item 1&2 is allowed for drilling in over burden and fixing Casing pipes beyond 20 M (for fixing Casing pipes only) a) Above M and upto 30 M - 15%, b) Above 30 M - 30% (Measurement of overburden is restricted to the depth of casing pipe fixed excluding initial depth of 20M and projection above ground level). 2) A sum of R . 100/- is to be deducted for Dry Borewell towards yield test. tc. complete. Each 5816.8 5816.8 1.0 False None None False None False 5816.8 0 3870700 148326 None code2 Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete ) (Above 450m of drilling add 10% for every 50m depth) - Borewell depth of 0 to 50 Mtrs Rmtr 407.0 407.0 50.0 False None None False None False 20350.0 0 3870701 148326 None code3 Borewell depth of 50 to 100 Mtrs Rmtr 510.4 510.4 50.0 False None None False None False 25520.0 0 3870702 148326 None code4 Borewell depth of 100 to 150 Mtrs Rmtr 542.3 542.3 50.0 False None None False None False 27115.0 0 3870703 148326 None code5 Borewell depth of 150 to 200 Mtrs Rmtr 629.2 629.2 50.0 False None None False None False 31460.0 0 3870704 148326 None code6 Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 nd latest ammendments, electrical resistance welded steel tubes, terial and conforming to IS 1387-1993 and manufactured by basic open hearth electric or basic oxygen process in random length of 5-7m both ends.threaded conforming to IS 554-1985 one end fixe with socket conforming to IS 4270-2001 and the other end with screwed pipes all shall be responsibaly free from defects. The tubes shall be responsible straight end should be with ISI marking weighing 25.10kg/m.prices include Collar-Medium duty. m 2126.3 2126.3 35.0 False None None False None False 74420.5 0 3870705 148326 None code7 Supply and delivery at site 50mm(2”) dia heavy duty unplasticized PVC Column pipes with heavy duty collars,rubber profile ring,vibration control profile ring,freezing and turbulence free leak proof EPDM ring with ISI mark with its latest amendments. Rmtr 605.0 605.0 60.0 False None None False None False 36300.0 0 3870706 148326 None code8 Providing and fixing MS casing collars per IS 1239 (part-II) 1982 with all latest amendments if any for any dia. The thic ness of plate used for covering one end shall be 3mm (minimum). The dimensions of caps and colars shall be strictly as per IS 1239 (Part-II) 1982 with all amendments. Nos 165.0 165.0 1.0 False None None False None False 165.0 0 3870707 148326 None code9 Providing and laying at site of wor MS asing caps as per IS 1239 (part- II) 1982 with all latest amendm nts if any for any dia. The thickness of plate used for covering one e shall be 3mm (minimum). The dimensions of caps and olars shall be strictly as per IS 1239 (Part-II) 1982 with all mendments including cost of material and labour charges for fixing, if a y etc. complete with all lead and lifts and as directed by the Engineer in charge. Nos 180.4 180.4 1.0 False None None False None False 180.4 0 3870708 148326 None code10 Providing NP/CP 50mm dia Waste Unions conforming to ISI specifications and fixing them in position as per directions (Rates includes cost of materials fixtures and conveyance to work spot etc complete) Nos 231.0 231.0 1.0 False None None False None False 231.0 0 3870709 148326 None code11 Providing Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications, to work site as per necessary ammendments and instructions of engineer incharge of work. For HP etc Complete.5.00 HP - 90 LPM @ 110 m = 15 STG Outlet Dia - 2.00" Each 35350.7 35350.7 1.0 False None None False None False 35350.7 0 3870710 148326 None code12 Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog Voltmeter 1ni with Phase selector switch, Isolating switch OUTGOING for Main Electrical Pump: 1 No. MCB 1 No. DOL of S/D Starter suitable for respective HP 1 No. Electrcal Protection Like single Phase preventor, under voltage over Volage, under current over current & dry run protectionsuitable for thepumpdescribedabove 1 no Indoor type NOTE: 1) DOL- Direct Online Starter 2) S-D- Star Delta Starter etc. complete.3 to 6 HP pumps Each 10505.0 10505.0 1.0 False None None False None False 10505.0 0 3870711 148326 None code13 Supply and delivery at site 50mm(2”) dia heavy duty CI adopter set complete suitable for uPVC Column pipes for Submersible pumpsets Set 1705.0 1705.0 1.0 False None None False None False 1705.0 0 3870712 148326 None code14 Supply and delivery at site Stringing of heavy duty Naylone/PP rope with ISI etc complete suitable for Single phase Pumpsets. Job 44.0 44.0 100.0 False None None False None False 4400.0 0 3870713 148326 None code15 Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well caps, cable clips and water tight gland cable protectors, bolts, nuts, valve and gauges,tools and equipments etc., involved in the job as per specifications, with necessary tests as per specifications, with testing of as per instructions of engineer incharge of work. Job 7150.0 7150.0 1.0 False None None False None False 7150.0 0 3870714 148326 None code16 Labour charges for erection of indoor type panel board and meter board units with all necessary materials and labour tools and equipments including cement concrete for foundation/bed etc,complete as per specification, with testing of as per instructions of engineer incharge of work. Job 1485.0 1485.0 1.0 False None None False None False 1485.0 0 3870715 148326 None code17 Supplying and drawing 3 core flat PVC sheathed submersible pump cable manufactured with electrolytic grade copper with flexible copper with low resistance conductor confirming to13:8130-1984 and virgin grade PVC insulation and powder coating extruded PVC sheathed suitable for working voltage upto 1100 Volts as per IS-694:1990.3C x 4 mm2 m 184.8 184.8 275.0 False None None False None False 50820.0 0 3870716 148326 None code18 Fabricating supplying and mounting MS box made out ....SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour etc., complete. 16SWG Sq CM 0.47 0.47 30000.0 False None None False None False 14100.0 0 3870717 148326 None code19 Supply and Installation / Fixing / Provision of Outdoor type Thermoplastic Modular Panel enclosure with transparent Polycarbonate Lid, shock proof, IP65 (Weather Proof), rust proof, dust proof, water proof, corrosion proof having internally Embedded gasket on both lid and flap suitable to fix Single Phase / Three Phase Energy Meter in suitable base plate and having a provision for Fuse / MCB cut-out with suitable transparent hinged flap opening for operating MCB along with complete tamper proof SEALING facility. 600mmx600mmx170mm. Each 15972.0 15972.0 1.0 False None None False None False 15972.0 0 3870718 148326 None code20 Supply and fixing polished wood board made of not less than 15mm thick plank on both sides of not more than 2 pieces and fixing the same to the wall using tapered inverted wooden plugs screws.20" x 20" x 2.5" Each 358.74 358.74 1.0 False None None False None False 358.74 0 3870719 148326 None code21 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.6-32 A SP Each 456.5 456.5 1.0 False None None False None False 456.5 0 3870720 148326 None code22 Fixing of ..... A TPST / change over switch / Contactor along with neutral link with screws, bolts, nuts and wiring using required capacity wires and circuit labelling..15A to 63A TPST Each 305.8 305.8 1.0 False None None False None False 305.8 0 3870721 148326 None code23 Supplying, fixing and wiring heavy duty low voltage capacitors conforming to IS 2834. 3 phase, 400/440 V grade, for power factor improvement of rotating machineries like induction motor. Kvar 528.0 528.0 1.0 False None None False None False 528.0 0 1724827882000 1 None None Buildings Proposed Construction of KSIC Bhavan at Queens Road, Bangalore City. 455701.52 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3870722 148327 None code1 COMPOUND WALL: Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work 1.14.1 In all kinds of soils Depth upto 3 m. Cum 112.2 112.2 40.5 False None None False None False 4544.1 0 3870723 148327 None code2 Loading and Unloading of Stone Boulder/Stone aggregates/ Sand/Kankar/Moorum. Cum 148.5 148.5 10.0 False None None False None False 1485.0 0 3870724 148327 None code3 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. Cum 292.6 292.6 40.5 False None None False None False 11850.3 0 3870725 148327 None code4 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications.Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates. Including FormWork Cum 6587.9 6587.9 3.532 False None None False None False 23268.4628 0 3870726 148327 None code5 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Tonne 86912.1 86912.1 0.932 False None None False None False 81002.0772 0 3870727 148327 None code6 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 Using 20 mm nominal size graded crushed coarse aggregates Cum 6838.7 6838.7 0.7 False None None False None False 4787.09 0 3870728 148327 None code7 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates - Column Cum 12796.41 12796.41 1.3401 False None None False None False 17148.469041 0 3870729 148327 None code8 do -Footing Cum 8129.48 8129.48 5.471 False None None False None False 44476.38508 0 3870730 148327 None code9 do -Plinth Beam Cum 11290.95 11290.95 5.25 False None None False None False 59277.4875 0 3870731 148327 None code10 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. Sqm 1441.0 1441.0 52.5 False None None False None False 75652.5 0 3870732 148327 None code11 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 408.1 408.1 112.0 False None None False None False 45707.2 0 3870733 148327 None code12 Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 97.9 97.9 112.0 False None None False None False 10964.8 0 3870734 148327 None code13 Providing and fixing M.S. Gate as per Chief Architect Drawing, using 50mm x 50mm 14 guage M.S. hollow pipe frame work bent to ornamental shape as shown in the drawing and 35mm x 6mm and 16 x 16mm Square rods for verticals alternatively spaced at 4cms c/c in two halves and 40mmx6mm M.S. flats for horizontal member and at the top cast iron spikes are provided at alternate vertical members asshown in the drawing etc., complete. All the steel surface should be thoroughly cleaned free of rust and painted with anti corrosive paint (shop paint) etc., complete. The work includes cost of all materials, labour charges for all items of work, hire charges for welding, cutting and grinding equipment, and electricity charges, with lead and lift, loading and unloading charges, etc., complete as per specifiocation. Sqm 3313.2 3313.2 22.799 False None None False None False 75537.6468 0 1724827882000 1 None None Buildings Proposed Construction of KSIC Bhavan at Queens Road, Bangalore City. 699996.14 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3870735 148328 None code1 DISMANTLING WORK : Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge. Cum 2668.6 2668.6 139.751 False None None False None False 372939.5186 0 3870736 148328 None code2 Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge. Cum 530.2 530.2 278.208 False None None False None False 147505.8816 0 3870737 148328 None code3 Dismantling of cement concrete platform along with curtain walls and base concrete etc. including stacking of useful materials near the site and disposal of unserviceable materials to the appropriate disposal area as per direction of Engineer-in-charge. 120 x 120 cm (outside to outside) Cum 831.6 831.6 17.1 False None None False None False 14220.36 0 3870738 148328 None code4 Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer- in-charge. In cement mortar Cum 1852.4 1852.4 30.888 False None None False None False 57216.9312 0 3870739 148328 None code5 Taking out doors, windows and clerestory window shutters (steel or wood) including stacking to the appropriate disposal area as per direction of Engineer-in-charge.Of area 3 m² and below Sqm 103.4 103.4 187.2 False None None False None False 19356.48 0 3870740 148328 None code6 Loading and Unloading of Stone Boulder/Stone aggregates/Sand/ Kankar/Moorum. (Tipper 5.5 m3) Cum 148.5 148.5 597.69 False None None False None False 88756.965 0 1724827882000 0 None None Buildings Proposed Construction of KSIC Bhavan at Queens Road, Bangalore City. 128675.32 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3870741 148329 None code 1 RAIN WATER HARVESTING: Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work. In all kinds of soils Depth upto 1.5 m Cum 266.2 266.2 16.9668 False None None False None False 4516.56216 0 3870742 148329 None code 2 Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work. Depth exceeding 1.5m, but not exceeding 3 m Cum 284.9 284.9 16.9668 False None None False None False 4833.84132 0 3870743 148329 None code3 Loading and Unloading of Stone Boulder/Stone aggregates/ Sand/Kankar/Moorum.Taking output 10 t load and lead 10 km = 100 t.km (135+12x10x1.35) Cum 326.7 326.7 33.9336 False None None False None False 11086.10712 0 3870744 148329 None code4 Providing and fixing factory made precast RCC perforated drain covers, having concrete of strength not less than M-25, of size 1000 x 450x50 mm, reinforced with 8 mm dia four nos longitudinal & 9 nos cross sectionalT.M.T. hoop bars, including providing 50 mm dia perforations @ 100 to 125 mm c/c, including providing edge binding with M.S. flats of size 50 mm x 1.6 mm complete, all as per direction of Engineer-in-charge. Each 1235.3 1235.3 70.0 False None None False None False 86471.0 0 3870745 148329 None code5 Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. Cum 1102.2 1102.2 2.8278 False None None False None False 3116.80116 0 3870746 148329 None code6 Supplying, filling, spreading &leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. Cum 1304.6 1304.6 1.4139 False None None False None False 1844.57394 0 3870747 148329 None code7 Supplying, filling, spreading &leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -in-charge. Cum 1311.2 1311.2 1.4139 False None None False None False 1853.90568 0 3870748 148329 None code8 Gravel packing in tube well construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge. Cum 1472.9 1472.9 1.4139 False None None False None False 2082.53331 0 3870749 148329 None code9 Providing and laying 100mm thick pre-cast cover slabs over Rain water harvesting pit of width not exceeding 1000 mm using M20 concrete reinforced with TMT bars Fe 500 @ 6kg/m2, slabs jointed in CM 1:3 proportion and nicely finished Including providing holes in the Cover slabs wherever necessary for easy drainage of surface water including of labour, materials, scaffolding, usage of machinery, curing, lead and lift charges etc, Complete. Sqm 1287.0 1287.0 10.0 False None None False None False 12870.0 0 1724827882000 0 None None Buildings Proposed Construction of KSIC Bhavan at Queens Road, Bangalore City. 981026.71 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3870750 148330 None code1 INTERNAL PLUMBING: Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work - 40mm dia pipes, From wash basin waste lines m 334.4 334.4 8.0 False None None False None False 2675.2 0 3870751 148330 None code2 do - 50mm dia pipes, From sink & urinal waste lines m 424.6 424.6 5.0 False None None False None False 2123.0 0 3870752 148330 None code3 Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. ( Internal drainage) - 75mm nominal dia pipes m 317.9 317.9 15.0 False None None False None False 4768.5 0 3870753 148330 None code4 do - 110mm nominal dia pipes m 423.5 423.5 25.0 False None None False None False 10587.5 0 3870754 148330 None code5 do - PVC pipe - OD 75mm and 6 Kg/sqcm - (Shaft Drainage) m 317.9 317.9 60.0 False None None False None False 19074.0 0 3870755 148330 None code6 do - PVC pipe - OD 110mm and 6 Kg/sqcm - (Shaft Drainage) m 423.5 423.5 60.0 False None None False None False 25410.0 0 3870756 148330 None code7 Providing and fixing PVC (S.W.R) Multi Floor Trap 10.0 cm X 7.5 cm X 5.0 cm X 4.0 cm with all fitting arrangements & all necessary accessories complete Each 268.4 268.4 8.0 False None None False None False 2147.2 0 3870757 148330 None code8 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 75 mm diameter m 216.7 216.7 50.0 False None None False None False 10835.0 0 3870758 148330 None code9 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 100 mm diameter m 320.1 320.1 100.0 False None None False None False 32010.0 0 3870759 148330 None code10 SANITARY AND CP FIXTURESProviding and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. Each 1342.0 1342.0 3.0 False None None False None False 4026.0 0 3870760 148330 None code11 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 Each 682.0 682.0 12.0 False None None False None False 8184.0 0 3870761 148330 None code12 Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete. Each 12346.4 12346.4 4.0 False None None False None False 49385.6 0 3870762 148330 None code13 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: One urinal basin with 5 litre white P.V.C. automatic flushing cistern Each 4899.4 4899.4 1.0 False None None False None False 4899.4 0 3870763 148330 None code14 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. Nos 797.5 797.5 2.0 False None None False None False 1595.0 0 3870764 148330 None code15 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15mm C.P. brass pillar taps Each 3390.2 3390.2 7.0 False None None False None False 23731.4 0 3870765 148330 None code16 Providing and fixing CP Brass 32mm size Bottle Trap of approved quality& make and as per the direction of Engineer-in-charge. Each 891.0 891.0 8.0 False None None False None False 7128.0 0 3870766 148330 None code17 Providing and fixing unplasticised PVC connection pipe with brass unions :(30 cm length 15 mm nominal bore) Each 91.3 91.3 8.0 False None None False None False 730.4 0 3870767 148330 None code18 Providing and fixing PTMT Bottle Trap for Wash basin and sink. Bottle trap 31mm single piece moulded with height of 270 mm, eTFective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 g Each 336.6 336.6 8.0 False None None False None False 2692.8 0 3870768 148330 None code19 Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. Waste coupling 31 mm dia of 79 mm length and 62mm breadth weighing not less than 45 g Each 99.0 99.0 8.0 False None None False None False 792.0 0 3870769 148330 None code20 Providing and fixing brass bib cock of approved quality 15 mm nominal bore Nos 314.6 314.6 3.0 False None None False None False 943.8 0 3870770 148330 None code21 Providing and fixing granite stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal parti- tions by cutting a chase of appropriate width with chase cutter and embed- ding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in- charge and finished smooth. Sqm 3067.9 3067.9 2.0 False None None False None False 6135.8 0 3870771 148330 None code22 WATER SUPPLY: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. - 15 mm nominal dia Pipes m 339.9 339.9 10.0 False None None False None False 3399.0 0 3870772 148330 None code23 do - 20 mm nominal dia Pipes m 416.9 416.9 15.0 False None None False None False 6253.5 0 3870773 148330 None code24 do - 25 mm nominal dia pipes m 524.7 524.7 15.0 False None None False None False 7870.5 0 3870774 148330 None code25 do - 32 mm nominal dia pipes m 612.7 612.7 10.0 False None None False None False 6127.0 0 3870775 148330 None code26 SHAFTS AND TERRACEProviding and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work - 25 mm nominal dia Pipes m 325.6 325.6 25.0 False None None False None False 8140.0 0 3870776 148330 None code27 do - 32 mm nominal dia Pipes m 409.2 409.2 15.0 False None None False None False 6138.0 0 3870777 148330 None code28 do - 40 mm nominal dia Pipes m 524.7 524.7 10.0 False None None False None False 5247.0 0 3870778 148330 None code29 50mm nominal dia Pipes m 793.1 793.1 50.0 False None None False None False 39655.0 0 3870779 148330 None code30 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : - 25 mm nominal bore Nos 365.2 365.2 7.0 False None None False None False 2556.4 0 3870780 148330 None code31 Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) : - 32 mm nominal bore Nos 657.8 657.8 2.0 False None None False None False 1315.6 0 3870781 148330 None code32 do - 40 mm nominal bore Nos 772.2 772.2 2.0 False None None False None False 1544.4 0 3870782 148330 None code33 50 mm nominal bore Nos 940.5 940.5 4.0 False None None False None False 3762.0 0 3870783 148330 None code34 Providing and fixing gun metal non- return valve of approved quality (screwed end) : 50 mm nominal bore Horizontal Nos 1497.1 1497.1 2.0 False None None False None False 2994.2 0 3870784 148330 None code35 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. Ltr 9.9 9.9 4000.0 False None None False None False 39600.0 0 3870785 148330 None code36 FIRST FLOOR: Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work - 40mm dia pipes, From wash basin waste lines m 337.74 337.74 12.0 False None None False None False 4052.88 0 3870786 148330 None code37 50mm dia pipes, From sink & urinal waste lines m 428.84 428.84 15.0 False None None False None False 6432.6 0 3870787 148330 None code38 Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. ( Internal drainage) - 75mm nominal dia pipes m 321.07 321.07 20.0 False None None False None False 6421.4 0 3870788 148330 None code39 do -110mm nominal dia pipes m 427.73 427.73 25.0 False None None False None False 10693.25 0 3870789 148330 None code40 Providing and fixing PVC (S.W.R) Multi Floor Trap 10.0 cm X 7.5 cm X 5.0 cm X 4.0 cm with all fitting arrangements & all necessary accessories complete Each 271.08 271.08 10.0 False None None False None False 2710.8 0 3870790 148330 None code41 SANITARY AND CP FIXTURES: Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. Each 1355.42 1355.42 4.0 False None None False None False 5421.68 0 3870791 148330 None code42 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 Each 688.82 688.82 15.0 False None None False None False 10332.3 0 3870792 148330 None code43 Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete. Each 12469.86 12469.86 4.0 False None None False None False 49879.44 0 3870793 148330 None code44 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: One urinal basin with 5 litre white P.V.C. automatic flushing cistern Each 4948.39 4948.39 1.0 False None None False None False 4948.39 0 3870794 148330 None code45 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. Nos 805.47 805.47 2.0 False None None False None False 1610.94 0 3870795 148330 None code46 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15mm C.P. brass pillar taps Each 3424.1 3424.1 5.0 False None None False None False 17120.5 0 3870796 148330 None code47 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : (510x1040 mm bowl depth 250 mm) Each 6241.59 6241.59 1.0 False None None False None False 6241.59 0 3870797 148330 None code48 Providing and fixing Sink cock with swivel spout & wall flange, wall mountable made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class- Economy Each 2142.0 2142.0 1.0 False None None False None False 2142.0 0 3870798 148330 None code49 Providing and fixing CP Brass 32mm size Bottle Trap of approved quality& make and as per the direction of Engineer-in-charge. Each 899.91 899.91 7.0 False None None False None False 6299.37 0 3870799 148330 None code50 Providing and fixing unplasticised PVC connection pipe with brass unions :(30 cm length 15 mm nominal bore) Each 92.21 92.21 7.0 False None None False None False 645.47 0 3870800 148330 None code51 Providing and fixing PTMT Bottle Trap for Wash basin and sink. Bottle trap 31mm single piece moulded with height of 270 mm, eTFective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 g Each 339.96 339.96 7.0 False None None False None False 2379.72 0 3870801 148330 None code52 Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. Waste coupling 31 mm dia of 79 mm length and 62mm breadth weighing not less than 45 g Each 99.99 99.99 7.0 False None None False None False 699.93 0 3870802 148330 None code53 Providing and fixing brass bib cock of approved quality 15 mm nominal bore Nos 317.74 317.74 5.0 False None None False None False 1588.7 0 3870803 148330 None code54 Providing and laying flooring and steps fine dressed granite stone slabs 40 mm thick on cement mortar bed 1:6, 25 mm thick, and pointed with cement mortar 1:3 over existing cement concrete bed , including cost of materials, mortar, labour, curing complete as per specifications. Sqm 4783.96 4783.96 4.0 False None None False None False 19135.84 0 3870804 148330 None code55 Providing and fixing granite stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal parti- tions by cutting a chase of appropriate width with chase cutter and embed- ding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in- charge and finished smooth. Sqm 3098.57 3098.57 2.0 False None None False None False 6197.14 0 3870805 148330 None code56 WATER SUPPLY: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc - 15 mm nominal dia Pipes m 343.29 343.29 10.0 False None None False None False 3432.9 0 3870806 148330 None code57 do - 20 mm nominal dia Pipes m 421.06 421.06 15.0 False None None False None False 6315.9 0 3870807 148330 None code58 do - 25 mm nominal dia pipes m 529.94 529.94 15.0 False None None False None False 7949.1 0 3870808 148330 None code59 do - 32 mm nominal dia pipes m 618.82 618.82 10.0 False None None False None False 6188.2 0 3870809 148330 None code60 SECOND FLOOR: Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work - 40mm dia pipes, From wash basin waste lines m 341.08 341.08 12.0 False None None False None False 4092.96 0 3870810 148330 None code61 50mm dia pipes, From sink & urinal waste lines m 433.09 433.09 15.0 False None None False None False 6496.35 0 3870811 148330 None code62 Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. ( Internal drainage) - 75mm nominal dia pipes m 324.25 324.25 20.0 False None None False None False 6485.0 0 3870812 148330 None code63 do -110mm nominal dia pipes m 431.96 431.96 25.0 False None None False None False 10799.0 0 3870813 148330 None code64 Providing and fixing PVC (S.W.R) Multi Floor Trap 10.0 cm X 7.5 cm X 5.0 cm X 4.0 cm with all fitting arrangements & all necessary accessories complete Each 273.76 273.76 10.0 False None None False None False 2737.6 0 3870814 148330 None code65 SANITARY AND CP FIXTURES: Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. Each 1368.84 1368.84 4.0 False None None False None False 5475.36 0 3870815 148330 None code66 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 Each 695.64 695.64 15.0 False None None False None False 10434.6 0 3870816 148330 None code67 Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete. Each 12593.32 12593.32 4.0 False None None False None False 50373.28 0 3870817 148330 None code68 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: One urinal basin with 5 litre white P.V.C. automatic flushing cistern Each 4997.38 4997.38 1.0 False None None False None False 4997.38 0 3870818 148330 None code69 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. Nos 813.45 813.45 2.0 False None None False None False 1626.9 0 3870819 148330 None code70 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15mm C.P. brass pillar taps Each 3458.0 3458.0 4.0 False None None False None False 13832.0 0 3870820 148330 None code71 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : (510x1040 mm bowl depth 250 mm) Each 6303.39 6303.39 1.0 False None None False None False 6303.39 0 3870821 148330 None code72 Providing and fixing Sink cock with swivel spout & wall flange, wall mountable made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class- Economy Each 2163.21 2163.21 1.0 False None None False None False 2163.21 0 3870822 148330 None code73 Providing and fixing CP Brass 32mm size Bottle Trap of approved quality& make and as per the direction of Engineer-in-charge. Each 908.82 908.82 6.0 False None None False None False 5452.92 0 3870823 148330 None code74 Providing and fixing unplasticised PVC connection pipe with brass unions :(30 cm length 15 mm nominal bore) Each 93.12 93.12 6.0 False None None False None False 558.72 0 3870824 148330 None code75 Providing and fixing PTMT Bottle Trap for Wash basin and sink. Bottle trap 31mm single piece moulded with height of 270 mm, eTFective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 g Each 343.33 343.33 6.0 False None None False None False 2059.98 0 3870825 148330 None code76 Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. Waste coupling 31 mm dia of 79 mm length and 62mm breadth weighing not less than 45 g Each 100.97 100.97 6.0 False None None False None False 605.82 0 3870826 148330 None code77 Providing and fixing brass bib cock of approved quality 15 mm nominal bore Nos 320.89 320.89 5.0 False None None False None False 1604.45 0 3870827 148330 None code78 Providing and laying flooring and steps fine dressed granite stone slabs 40 mm thick on cement mortar bed 1:6, 25 mm thick, and pointed with cement mortar 1:3 over existing cement concrete bed , including cost of materials, mortar, labour, curing complete as per specifications. Sqm 4831.33 4831.33 4.0 False None None False None False 19325.32 0 3870828 148330 None code79 Providing and fixing granite stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal parti- tions by cutting a chase of appropriate width with chase cutter and embed- ding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in- charge and finished smooth. Sqm 3129.25 3129.25 2.0 False None None False None False 6258.5 0 3870829 148330 None code80 WATER SUPPLY: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc - 15 mm nominal dia Pipes m 346.69 346.69 10.0 False None None False None False 3466.9 0 3870830 148330 None code81 20 mm nominal dia Pipes m 425.23 425.23 15.0 False None None False None False 6378.45 0 3870831 148330 None code82 25 mm nominal dia pipes m 535.19 535.19 15.0 False None None False None False 8027.85 0 3870832 148330 None code83 32 mm nominal dia pipes m 624.95 624.95 10.0 False None None False None False 6249.5 0 3870833 148330 None code84 TERRACE FLOOR: Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work - 40mm dia pipes, From wash basin waste lines m 344.43 344.43 10.0 False None None False None False 3444.3 0 3870834 148330 None code85 50mm dia pipes, From sink & urinal waste lines m 437.33 437.33 15.0 False None None False None False 6559.95 0 3870835 148330 None code86 Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. ( Internal drainage) - 75mm nominal dia pipes m 327.43 327.43 15.0 False None None False None False 4911.45 0 3870836 148330 None code87 110mm nominal dia pipes m 436.2 436.2 20.0 False None None False None False 8724.0 0 3870837 148330 None code88 Providing and fixing PVC (S.W.R) Multi Floor Trap 10.0 cm X 7.5 cm X 5.0 cm X 4.0 cm with all fitting arrangements & all necessary accessories complete Each 276.45 276.45 8.0 False None None False None False 2211.6 0 3870838 148330 None code89 SANITARY AND CP FIXTURES: Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. Each 1382.26 1382.26 3.0 False None None False None False 4146.78 0 3870839 148330 None code90 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 Each 702.46 702.46 12.0 False None None False None False 8429.52 0 3870840 148330 None code91 Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete. Each 12716.79 12716.79 3.0 False None None False None False 38150.37 0 3870841 148330 None code92 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: One urinal basin with 5 litre white P.V.C. automatic flushing cistern Each 5046.38 5046.38 1.0 False None None False None False 5046.38 0 3870842 148330 None code93 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. Nos 821.42 821.42 2.0 False None None False None False 1642.84 0 3870843 148330 None code94 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15mm C.P. brass pillar taps Each 3491.9 3491.9 1.0 False None None False None False 3491.9 0 3870844 148330 None code95 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : (510x1040 mm bowl depth 250 mm) Each 6365.19 6365.19 1.0 False None None False None False 6365.19 0 3870845 148330 None code96 Providing and fixing Sink cock with swivel spout & wall flange, wall mountable made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class- Economy Each 2184.42 2184.42 1.0 False None None False None False 2184.42 0 3870846 148330 None code97 Providing and fixing CP Brass 32mm size Bottle Trap of approved quality& make and as per the direction of Engineer-in-charge. Each 917.73 917.73 3.0 False None None False None False 2753.19 0 3870847 148330 None code98 Providing and fixing unplasticised PVC connection pipe with brass unions :(30 cm length 15 mm nominal bore) Each 94.03 94.03 3.0 False None None False None False 282.09 0 3870848 148330 None code99 Providing and fixing PTMT Bottle Trap for Wash basin and sink. Bottle trap 31mm single piece moulded with height of 270 mm, eTFective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 g Each 346.69 346.69 3.0 False None None False None False 1040.07 0 3870849 148330 None code100 Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. Waste coupling 31 mm dia of 79 mm length and 62mm breadth weighing not less than 45 g Each 101.97 101.97 3.0 False None None False None False 305.91 0 3870850 148330 None code101 Providing and fixing brass bib cock of approved quality 15 mm nominal bore Nos 324.03 324.03 5.0 False None None False None False 1620.15 0 3870851 148330 None code102 Providing and laying flooring and steps fine dressed granite stone slabs 40 mm thick on cement mortar bed 1:6, 25 mm thick, and pointed with cement mortar 1:3 over existing cement concrete bed , including cost of materials, mortar, labour, curing complete as per specifications. Sqm 4878.69 4878.69 4.0 False None None False None False 19514.76 0 3870852 148330 None code103 Providing and fixing granite stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal parti- tions by cutting a chase of appropriate width with chase cutter and embed- ding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in- charge and finished smooth. Sqm 3159.93 3159.93 2.0 False None None False None False 6319.86 0 3870853 148330 None code104 WATER SUPPLY: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. - 15 mm nominal dia Pipes m 350.09 350.09 10.0 False None None False None False 3500.9 0 3870854 148330 None code105 do - 20 mm nominal dia Pipes m 429.4 429.4 15.0 False None None False None False 6441.0 0 3870855 148330 None code106 do - 25 mm nominal dia pipes m 540.44 540.44 15.0 False None None False None False 8106.6 0 3870856 148330 None code107 do - 32 mm nominal dia pipes m 631.08 631.08 10.0 False None None False None False 6310.8 0 3870857 148330 None code108 Providing fixing Air Vent Cowel pipes - 75mm Nos 350.0 350.0 5.0 False None None False None False 1750.0 0 3870858 148330 None code109 do - 110mm Nos 500.0 500.0 5.0 False None None False None False 2500.0 0 3870859 148330 None code110 Drilling with core cutting machine in RCC beams, slabs,floors etc., for alying pipes and rendering the same in RCC 1:2:4, finishing the same to the satisfication of the owner or his authorised representative etc., including nominal reniforcement wherever required complete. The quoted rate shall also include for providing EPOXY based water proofing compound for sealing the joints around the pipes - Core cut-75mm dia Nos 600.0 600.0 20.0 False None None False None False 12000.0 0 3870860 148330 None code111 do - Core cut-110mm dia Nos 900.0 900.0 30.0 False None None False None False 27000.0 0 3870861 148330 None code112 do - Core cut-160mm dia Nos 1200.0 1200.0 20.0 False None None False None False 24000.0 0 3870862 148330 None code113 do - Providing and fixing 7.50cms to 15cms dia N.P. Grating 100mm dia. (Page.91/I.No.12.111) Nos 150.0 150.0 36.0 False None None False None False 5400.0 0 3870863 148330 None code114 SANITARY AND CP FIXTURES: Supplying, fixing, testing and commissioning of CP health faucet Hand operated spray unit (instant type) CP Crutch etc., complete as directed by the Engineer in charge. ALD-577. (Jaguar make or Equalent) Nos 1850.0 1850.0 15.0 False None None False None False 27750.0 0 1724827882000 0 None None Buildings Proposed Construction of KSIC Bhavan at Queens Road, Bangalore City. 4344866.26 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3870864 148331 None code1 INTERNAL ELECTRICAL: Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Short point up to 3Mtr from tapping point to out let via switch Point 295.9 295.9 65.0 False None None False None False 19233.5 0 3870865 148331 None code2 Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Medium point above 3Mtr up to 6Mtr from tapping point to out let via switch Point 416.9 416.9 100.0 False None None False None False 41690.0 0 3870866 148331 None code3 Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Long point above 6Mtr up to 10Mtr from tapping point to out let via switch Point 610.5 610.5 200.0 False None None False None False 122100.0 0 3870867 148331 None code4 Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Two outlet in a row, above 3Mtr up to 6Mtr from tapping point to out let via switches Point 744.7 744.7 30.0 False None None False None False 22341.0 0 3870868 148331 None code5 Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Three outlet in a row, above 6Mts up to 10Mtr from tapping point to out let via switches Point 1087.9 1087.9 10.0 False None None False None False 10879.0 0 3870869 148331 None code6 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 1-2Way Each 151.8 151.8 100.0 False None None False None False 15180.0 0 3870870 148331 None code7 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 3Way Each 174.9 174.9 120.0 False None None False None False 20988.0 0 3870871 148331 None code8 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 4-5Way Each 194.7 194.7 30.0 False None None False None False 5841.0 0 3870872 148331 None code9 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 6Way Each 242.0 242.0 40.0 False None None False None False 9680.0 0 3870873 148331 None code10 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 8 Way Each 287.1 287.1 110.0 False None None False None False 31581.0 0 3870874 148331 None code11 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 10-12Way Each 350.9 350.9 90.0 False None None False None False 31581.0 0 3870875 148331 None code12 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 1 to 2 Module Each 150.7 150.7 100.0 False None None False None False 15070.0 0 3870876 148331 None code13 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 3 Module Each 177.1 177.1 120.0 False None None False None False 21252.0 0 3870877 148331 None code14 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 4 Module Each 192.5 192.5 30.0 False None None False None False 5775.0 0 3870878 148331 None code15 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 6 Module Each 257.4 257.4 40.0 False None None False None False 10296.0 0 3870879 148331 None code16 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 8 Module Each 312.4 312.4 110.0 False None None False None False 34364.0 0 3870880 148331 None code17 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 10-12 Module Each 378.4 378.4 90.0 False None None False None False 34056.0 0 3870881 148331 None code18 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps one way Switch Each 112.2 112.2 690.0 False None None False None False 77418.0 0 3870882 148331 None code19 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps Two way Switch Each 182.6 182.6 10.0 False None None False None False 1826.0 0 3870883 148331 None code20 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps 3way socket Each 188.1 188.1 285.0 False None None False None False 53608.5 0 3870884 148331 None code21 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator. Each 392.7 392.7 68.0 False None None False None False 26703.6 0 3870885 148331 None code22 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 32Amps DP switch Each 358.6 358.6 40.0 False None None False None False 14344.0 0 3870886 148331 None code23 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16Amps universal socket Each 259.6 259.6 50.0 False None None False None False 12980.0 0 3870887 148331 None code24 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 16Amps one way switch Each 198.0 198.0 10.0 False None None False None False 1980.0 0 3870888 148331 None code25 Supplyin and Fixing Metal Fan Box with Round Hook. No 128.7 128.7 68.0 False None None False None False 8751.6 0 3870889 148331 None code26 Supplying heavy gauge PVC conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary. 19/20mm dia 2mm thick m 72.6 72.6 2800.0 False None None False None False 203280.0 0 3870890 148331 None code27 Supplying heavy gauge PVC conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary. 25mm dia 2mm thick m 85.8 85.8 3650.0 False None None False None False 313170.0 0 3870891 148331 None code28 Supplying heavy gauge PVC conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary. 32mm dia 2.5mm thick m 113.3 113.3 700.0 False None None False None False 79310.0 0 3870892 148331 None code29 Supplying heavy gauge PVC conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., by groove cutting in wall and fixing by bracing U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary. 19/20mm dia 2mm thick m 74.8 74.8 1400.0 False None None False None False 104720.0 0 3870893 148331 None code30 Supplying heavy gauge PVC conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., by groove cutting in wall and fixing by bracing U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary. 25mm dia 2mm thick m 86.9 86.9 1900.0 False None None False None False 165110.0 0 3870894 148331 None code31 Supplying heavy gauge PVC conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., by groove cutting in wall and fixing by bracing U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary. 32mm dia 2.5mm thick m 108.9 108.9 350.0 False None None False None False 38115.0 0 3870895 148331 None code32 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 1.5 sqmm m 28.6 28.6 1650.0 False None None False None False 47190.0 0 3870896 148331 None code33 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 2.5 sqmm m 46.2 46.2 5000.0 False None None False None False 231000.0 0 3870897 148331 None code34 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 4 sqmm m 69.3 69.3 2500.0 False None None False None False 173250.0 0 3870898 148331 None code35 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 6 sqmm m 101.2 101.2 2000.0 False None None False None False 202400.0 0 3870899 148331 None code36 Supplying and fixing regular MCB distribution boards on wall/ wood board I flush mounting using required clamps,i bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase I 3 phase I single door with powder coated painting. Made out of 14 SWG MS enclosure III - Double Door 12 Way SP & N Each 2561.9 2561.9 3.0 False None None False None False 7685.7 0 3870900 148331 None code37 Supplying and fixing regular MCB distribution boards on wall/ wood board I flush mounting using required clamps,i bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase I 3 phase I single door with powder coated painting. Made out of 14 SWG MS enclosure III - Double Door 4 Way TP & N Each 4441.8 4441.8 5.0 False None None False None False 22209.0 0 3870901 148331 None code38 Supplying and fixing regular MCB distribution boards on wall/ wood board I flush mounting using required clamps,i bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase I 3 phase I single door with powder coated painting. Made out of 14 SWG MS enclosure III - Double Door 6 Way TP & N Each 5434.0 5434.0 5.0 False None None False None False 27170.0 0 3870902 148331 None code39 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 6-32Amps SP Each 456.5 456.5 180.0 False None None False None False 82170.0 0 3870903 148331 None code40 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 40Amps TPN Each 3348.4 3348.4 5.0 False None None False None False 16742.0 0 3870904 148331 None code41 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 50-63Amps TPN Each 3396.8 3396.8 5.0 False None None False None False 16984.0 0 3870905 148331 None code42 Supplying, fixing and wiring Residual current Circuit Breaker [RCCB] 240/450V up to 300mA sensitivity on existing wood/panel board 32-40 Amps 4 pole Each 5661.7 5661.7 10.0 False None None False None False 56617.0 0 3870906 148331 None code43 Supplying, fixing and wiring Earth Leakage Miniature Circuit Breaker [ELMCB] 240/450V up to 300mA sensitivity on existing wood/panel board 16-25 Amps 2 pole Each 4704.7 4704.7 3.0 False None None False None False 14114.1 0 3870907 148331 None code44 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 4 core 16 sqmm Km 97259.8 97259.8 0.2 False None None False None False 19451.96 0 3870908 148331 None code45 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 3.5 core 25 sqmm Km 153503.9 153503.9 0.1 False None None False None False 15350.39 0 3870909 148331 None code46 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 3.5 core 50 sqmm Km 169468.2 169468.2 0.05 False None None False None False 8473.41 0 3870910 148331 None code47 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 3.5 core 95 sqmm Km 410536.5 410536.5 0.1 False None None False None False 41053.65 0 3870911 148331 None code48 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 3.5 core 120 sqmm Km 502577.9 502577.9 0.1 False None None False None False 50257.79 0 3870912 148331 None code49 Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff 2.5 sqmm to 25 sqmm Km 22974.6 22974.6 0.1 False None None False None False 2297.46 0 3870913 148331 None code50 Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff 35 sqmm to 95 sqmm Km 34252.9 34252.9 0.15 False None None False None False 5137.935 0 3870914 148331 None code51 Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff 35 sqmm to 95 sqmm Km 35505.8 35505.8 0.1 False None None False None False 3550.58 0 3870915 148331 None code52 Supplying and fiixing of heavy duty cable glands suitable for UG cable of 1.1 KV class (metal only) 32mm dia Each 128.7 128.7 6.0 False None None False None False 772.2 0 3870916 148331 None code53 Supplying and fiixing of heavy duty cable glands suitable for UG cable of 1.1 KV class (metal only) 63mm dia Each 426.8 426.8 10.0 False None None False None False 4268.0 0 3870917 148331 None code54 Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 16 sqmm Each 13.68 13.68 16.0 False None None False None False 218.88 0 3870918 148331 None code55 Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 25 sqmm Each 22.0 22.0 16.0 False None None False None False 352.0 0 3870919 148331 None code56 Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 50 sqmm Long Barrel Each 66.0 66.0 8.0 False None None False None False 528.0 0 3870920 148331 None code57 Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 95sqmm Long Barrel Each 159.5 159.5 8.0 False None None False None False 1276.0 0 3870921 148331 None code58 Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 120sqmm Long Barrel Each 209.0 209.0 16.0 False None None False None False 3344.0 0 3870922 148331 None code59 Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit should be filled with equal proportion of salt and charcoal 150 mm all-round the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI wire of size as per lSI specification 7.3.3. of IS 732 using 12 mm dia bolts, nuts, washers and check nuts etc., the pipe shall have 16 through holes of 12 mm dia No 3861.0 3861.0 10.0 False None None False None False 38610.0 0 3870923 148331 None code60 Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 25x3mm GI strip m 90.2 90.2 200.0 False None None False None False 18040.0 0 3870924 148331 None code61 Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 25x3mm GI strip 25x6mm Copper strip m 627.0 627.0 40.0 False None None False None False 25080.0 0 3870925 148331 None code62 Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 25x3mm GI strip 600x600x3mm Copper plate Each 8163.1 8163.1 10.0 False None None False None False 81631.0 0 3870926 148331 None code63 Supply of round/square recess surface mounted rolling type LED Down light with W GU 10 LED Lamp Rib Fabricated from Die cast aluminium with white powder coated prewired to mains connector & has swiveling unit of aluminium die cast eye ball & LED Lamp position retained by circular wire spring, with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than 80. Power Input: 220 -240V 50/60Hz & Power factor greater than 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition LED square or round down light 10 -12W Each 973.5 973.5 15.0 False None None False None False 14602.5 0 3870927 148331 None code64 Supply of round/square recess/surface mounted rolling type LED Down light with .......W GU 10 LED Lamp Rib Fabricated from Die cast aluminium with white powder coated prewired to mains connector & has swiveling unit of aluminium die cast eye ball & LED Lamp position retained by circular wire spring, with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than 80. Power Input: 220-240V @ 50/60Hz & Power factor greater than 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition LED square or round down light 15-18W Each 1456.4 1456.4 90.0 False None None False None False 131076.0 0 3870928 148331 None code65 Supplying of ......feet - PVC Batten with integrated LED tube .....W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than 80. Power Input: 220-240V @ 50/60Hz & Power factor greater than 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. LED light fighting 1 x4'- 20/22 w Each 759.0 759.0 120.0 False None None False None False 91080.0 0 3870929 148331 None code66 Supplying & fixing of retrofit type - LED bulb.......W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI greater than 70%. efficacy greater than 80 lumen per watt, life greater than 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF greater than 0.95, power loss should Lesser than 5% of lamp wattage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 volts. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. 7 W, 6500K Each 163.9 163.9 12.0 False None None False None False 1966.8 0 3870930 148331 None code67 Supplying & fixing of retrofit type - LED bulb.......W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI Greater than 70%. efficacy Greater than 80 lumen per watt, life Greater than 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF Greater than 0.95, power loss should Lesser than 5% of lamp wattage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 volts. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. 12 W, 6500K Each 295.9 295.9 31.0 False None None False None False 9172.9 0 3870931 148331 None code68 Supplying of recess mounting non integral type ........LED ...... W luminaire comprising of pressure decast/extruded aluminium housing, with spring loaded fase ceiling clamps, Power LEDs with CCT 6500 degree K, CRI greater than 70%. efficacy Greater than100 lumen per watt, 120degree beam spread, life greater than 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The lamp compartment is enclosed with anti glare opal diffuser which enhances the lighting level. LEDs are driven by HF electronic driver integrated in a separate control gear assembly., with PF greater than 0.95, power loss should greater than 5% of lamp wattage., short circuit & open circuit protection to be integrated in the circuit, , THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 volts. BIS Approved and Tested by NABL/ CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition.LED modular down light 2x2 -34 -36watt Each 5008.3 5008.3 90.0 False None None False None False 450747.0 0 3870932 148331 None code69 Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output. Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, maximum light intensity should be between 60 degrees to 70 degrees. CCT greater than 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminaire greater than IK08. Power Factor greater than 0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mouting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with ........W System Power consumption. LED Efficiency greater than130lm/w, nominal CRI greater than75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008 . Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/ Lumileds/Osram make LED Source. LED Streetlight 40watts Each 4426.4 4426.4 6.0 False None None False None False 26558.4 0 3870933 148331 None code70 Supplying and fixing of LED Bulkhead of 10W with IP65 protection and IK 08 impact resistance suitable for surface and wall mounting applications. Each 926.2 926.2 7.0 False None None False None False 6483.4 0 3870934 148331 None code71 Supplying exhaust fan of 1440 RPM of 300mm (12") size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply. Each 1641.2 1641.2 13.0 False None None False None False 21335.6 0 3870935 148331 None code72 Supplying of Ceiling Fan with Capacitor rating As per guideline of BEE 5 star rating and IS:374/19 and also comply with IS: 1709/1984 with latest amendment, Rated voltage 220 V/50 Hz, Rated power upto 35 W +/- 10 %, Rated current As per IS:374/19, Rated power factor 0.9 lagging(min), Rated speed 350 +/- 10% RPM, Rated air delivery 210 +/- 10% Cubic Meter Minimum, Rated service value 6.2 CMM / W, Three Blades of blade leaf 1.05 mm thick Aluminium Alloy sheet, Class B motor insulation, Bearing Two ball bearings, Top 6202, Bottom 6201, as per IS specification, Motor winding. Temp rise Shall not exceed 75 deg C over and ambient of 40 0C by resistance method at 245 V, Insulation resistance Shall not be less than Two Mega Ohms (2M Ohms), Leakage current Should not exceed 210 Micro Amp, Power input, W& current, Air Delivery & Fan Speed as per IS:374/2019 with latest amendment, 2year manufacturer Warranty. (BLDC fans) 48" Sweep 5 Star (1200 mm) Each 2944.7 2944.7 68.0 False None None False None False 200239.6 0 3870936 148331 None code73 Supplying wall mounting fan suitable to operate at singlephase 230v A.C. supply. 300mm Sweep Each 2741.2 2741.2 3.0 False None None False None False 8223.6 0 3870937 148331 None code74 Supplying & Fixing of 70-150 Watts lamp holder 2 Pin Each 69.3 69.3 43.0 False None None False None False 2979.9 0 3870938 148331 None code75 Fixing all types and all capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling / rafters / girders using 23/0.0076” twin twisted PVC insulated wires, required Nos of round blocks and clamps. On wall / ceiling / Rafter / Girders Each 134.2 134.2 315.0 False None None False None False 42273.0 0 3870939 148331 None code76 Fixing a ceiling / wall mounting fan of all capacities and all types, with necessary clamps and 'S' hook made out of 15mm dia MS rod, with 5 amps. ceiling rose of approved quality with necessary length of 23 / 0.0076 inch PVC insulated twin twisted wire of approved quality, mounted on a suitable size wooden board and wired. Each 346.5 346.5 71.0 False None None False None False 24601.5 0 3870940 148331 None code77 Fixing one exhaust fan after making a suitable nitch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 amps, ceiling rose with sufficient length of 23 / 0.0076 inch PVC insulated twin core wire of approved make with wire mesh and wooden frame. Each 777.7 777.7 13.0 False None None False None False 10110.1 0 3870941 148331 None code78 Supplying and fixing telescopic M.S. bracket fabricated by using 0.5m length 4” dia telescopic M. S. pipe, with 2” dia 1.5m long M. S. bracket and are welded with suitable angle, using 6mm thick M. S. sheet, grip bolts & nuts, as required, suitable for 9 to 12 Mtrs. M. S. tubular pole, with necessary two coats of painting, with all other accessories. Single bracket 1.5 Mtr. Length Each 1607.1 1607.1 6.0 False None None False None False 9642.6 0 3870942 148331 None code79 Fixing halogen/metal halide / SVL / IL / LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires. Each 178.2 178.2 6.0 False None None False None False 1069.2 0 3870943 148331 None code80 MAIN LT PANEL: Fabricating supplying and mounting MS box made out ...SWG suitable for floor I wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 2 coats of red oxide primer paint and finally finished with approved colour enameled metal paint etc., complete 16SWG Sq CM 0.47 0.47 376000.0 False None None False None False 176720.0 0 3870944 148331 None code81 Supplying .........amps rated 3phase with neutral bus bar using required capacity electrolytic aluminum strips covered with heat shrinkable coloured PVC sleeve, mounted on phenoliciFRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete. 250Amps 4x30x10mm Aluminum Strips m 3778.5 3778.5 10.0 False None None False None False 37785.0 0 3870945 148331 None code82 Supplying and fixing angle iron frame work iabricated out of M.S. angle iron.. and M.S. flat ... with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint 40x40x6mm m 335.5 335.5 24.0 False None None False None False 8052.0 0 3870946 148331 None code83 Supplying and fixing angle iron frame work iabricated out of M.S. angle iron.. and M.S. flat ... with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint 50x100x50x6mm C channel m 831.6 831.6 24.0 False None None False None False 19958.4 0 3870947 148331 None code84 Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuit in Thermal Magnetic Release. Micro processor release shall have Earth Fault as per IS-13947. (Icu=100% lcs). In 4P MCCB, all Poles should have protection for Short-Cicrcuit/Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB. MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism.FOUR POLE 160Amps 35kA Each 14791.7 14791.7 1.0 False None None False None False 14791.7 0 3870948 148331 None code85 Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuit in Thermal Magnetic Release. Micro processor release shall have Earth Fault as per IS-13947. (Icu=100% lcs). In 4P MCCB, all Poles should have protection for Short-Cicrcuit/Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB. MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism.FOUR POLE 100Amps 25kA Each 9335.7 9335.7 2.0 False None None False None False 18671.4 0 3870949 148331 None code86 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 50-63Amps TPN Each 3396.8 3396.8 15.0 False None None False None False 50952.0 0 3870950 148331 None code87 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 6-32Amps TPN Each 1888.7 1888.7 6.0 False None None False None False 11332.2 0 3870951 148331 None code88 Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, KVA, KWH,KVAR suitable for 3 phase, 4 wire LT network with IP 54 degree of protection and completely wired as required with communication Port and Class 0.5s accuracy Each 10246.5 10246.5 1.0 False None None False None False 10246.5 0 3870952 148331 None code89 Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220v A.C. 50 Hz 12/24v D.C Each 566.5 566.5 3.0 False None None False None False 1699.5 0 3870953 148331 None code90 Supplying, fixing and wiring 50/5 to 400/5Amps 5VA burden Current Transformer. Class 0.5 accuracy with Tape Wound Each 618.2 618.2 3.0 False None None False None False 1854.6 0 3870954 148331 None code91 Supplying, fixing and wiring heavy duty low voltage capacitors conforming to IS 2834. 3 phase, 400/440 volts grade, for power factor improvement of rotating machinery Kvar 528.0 528.0 15.0 False None None False None False 7920.0 0 3870955 148331 None code92 Supply and fixing of 4pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947. 25 Amps Each 2431.0 2431.0 2.0 False None None False None False 4862.0 0 3870956 148331 None code93 CAPACITOR PANEL: Fabricating supplying and mounting MS box made out ...SWG suitable for floor I wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 2 coats of red oxide primer paint and finally finished with approved colour etc., complete 16SWG Sq CM 0.47 0.47 160000.0 False None None False None False 75200.0 0 3870957 148331 None code94 Supplying .........amps rated 3phase with neutral bus bar using required capacity electrolytic aluminum strips covered with heat shrinkable coloured PVC sleeve, mounted on phenoliciFRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete. 100Amps 4x30x10mm Aluminum Strips m 2711.5 2711.5 6.0 False None None False None False 16269.0 0 3870958 148331 None code95 Supplying and fixing angle iron frame work iabricated out of M.S. angle iron.. and M.S. flat ... with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint 40x40x6mm m 335.5 335.5 12.0 False None None False None False 4026.0 0 3870959 148331 None code96 Supplying and fixing angle iron frame work iabricated out of M.S. angle iron.. and M.S. flat ... with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint 50x100x50x6mm C channel m 831.6 831.6 12.0 False None None False None False 9979.2 0 3870960 148331 None code97 Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuit in Thermal Magnetic Release. Micro processor release shall have Earth Fault as per IS-13947. (Icu=100% lcs). In 4P MCCB, all Poles should have protection for Short-Cicrcuit/Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB. MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism.FOUR POLE 100Amps 25kA Each 9335.7 9335.7 1.0 False None None False None False 9335.7 0 3870961 148331 None code98 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 6-32Amps TPN Each 1888.7 1888.7 3.0 False None None False None False 5666.1 0 3870962 148331 None code99 Supplying, fixing and wiring heavy duty low voltage capacitors conforming to IS 2834. 3 phase, 400/440 volts grade, for power factor improvement of rotating machinery Kvar 528.0 528.0 30.0 False None None False None False 15840.0 0 3870963 148331 None code100 Supply and fixing of 4pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947. 25 Amps Each 2431.0 2431.0 3.0 False None None False None False 7293.0 0 3870964 148331 None code101 Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, KVA, KWH,KVAR suitable for 3 phase, 4 wire LT network with IP 54 degree of protection and completely wired as required with communication Port and Class 0.5s accuracy Each 10246.5 10246.5 1.0 False None None False None False 10246.5 0 3870965 148331 None code102 Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220v A.C. 50 Hz 12/24v D.C Each 566.5 566.5 3.0 False None None False None False 1699.5 0 3870966 148331 None code103 Supplying, fixing and wiring 50/5 to 400/5Amps 5VA burden Current Transformer. Class 0.5 accuracy with Tape Wound Each 618.2 618.2 3.0 False None None False None False 1854.6 0 1724827882000 0 None None Buildings Proposed Construction of KSIC Bhavan at Queens Road, Bangalore City. 13395794.86 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3870967 148332 None code1 PUMP: Supply and delivery of Centrifugal pumpset at site brand new best make and with discharge duty confirming to ISI standards and its latest amendments. (pump room collection sump pumps) (2 HP, Size 65x50 Head 13M, Discharge 462 LPM) Each 17173.0 17173.0 2.0 False None None False None False 34346.0 0 3870968 148332 None code2 Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well caps, cable clips and water tight gland cable protectors, bolts, nuts, valve and gauges,tools and equipments etc., involved in the job as per specifications, with necessary tests as per specifications, with testing of as per instructions of engineer incharge of work. Job 7152.0 7152.0 2.0 False None None False None False 14304.0 0 3870969 148332 None code3 Supply and delivery of Centrifugal pumpset at site brand new best make and with discharge duty confirming to ISI standards and its latest amendments. (Basement collection sump pumps) (2 HP, Size 65x50 Head 13M, Discharge 462 LPM) Each 17173.0 17173.0 2.0 False None None False None False 34346.0 0 3870970 148332 None code4 Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well caps, cable clips and water tight gland cable protectors, bolts, nuts, valve and gauges,tools and equipments etc., involved in the job as per specifications, with necessary tests as per specifications, with testing of as per instructions of engineer incharge of work. Job 7152.0 7152.0 2.0 False None None False None False 14304.0 0 3870971 148332 None code5 PUMP: Supplying, installing, testing and commissioning approved make centrifigal monoblock pump made of C.I Construction suitable for building application. Thequoted rate shall also include for auto lvl.controller with cabling between hePumps, control panel, UGR & OHT etc.,. complete.approx. Length of cable = 80. providing necessary safety devices viz. dry run protection, over load relays etc., complete working on 230V, 50Hz, 1Ph, with starter, 6.0 Lps @ 35.0m Head (1No. Working + 1No. Stand By) (From Domestic Water Sump to O.H.T) Nos 40000.0 40000.0 2.0 False None None False None False 80000.0 0 3870972 148332 None code6 External water supply and sanitary works: Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work - In all kinds of soils Depth upto 1.5 m Cum 266.2 266.2 71.0 False None None False None False 18900.2 0 3870973 148332 None code7 Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. Cum 292.6 292.6 71.0 False None None False None False 20774.6 0 3870974 148332 None code8 Providing UPVC FOAM CORE pipes conforming to IS 16098 P-1 2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading and unloading at both destinations and cuts of pipes wherever necessary including jointing of UPVC pipes (with cost of elastomeric sealing rings) and specials (excluding cost of specials) with jointing of approved type, with all labour, lead & lifts, including encasing the pipes alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (contractor will make his own arrangements for procuring water for testing) etc. complete. for: - Pipes of SN8 Self Fit - 160mm dia. m 678.7 678.7 45.0 False None None False None False 30541.5 0 3870975 148332 None code9 Providing UNPLASTICISED PVC pipes conforming to IS 16098:2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading and unloading at both destinations and cuts of pipes wherever necessary including jointing of UPVC pipes (with cost of elastomeric sealing rings) and specials (excluding cost of specials) with jointing of approved type, with all labour, lead & lifts, including encasing the pipes alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (contractor will make his own arrangements for procuring water for testing) etc. complete for - Pipes of SN4, 160mm dia. m 633.6 633.6 70.0 False None None False None False 44352.0 0 3870976 148332 None code10 Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover.. Each 5999.4 5999.4 6.0 False None None False None False 35996.4 0 3870977 148332 None code11 Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover..(CATCH BASIN) Each 5999.4 5999.4 4.0 False None None False None False 23997.6 0 3870978 148332 None code12 Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber 150 x 100 mm size P type With Non Modular common burnt clay bricks of designation 3.5 & with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: Nos 2839.1 2839.1 5.0 False None None False None False 14195.5 0 3870979 148332 None code13 Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. (50 mm nominal bore, 242mm long, weighing not less than 1240 g) No 1478.4 1478.4 2.0 False None None False None False 2956.8 0 3870980 148332 None code14 ELEVATORS : Design, supplying, erecting testing and commissioning of - 13Passenger lift(5 stops/5 Opening) with speed of 1mtr per second, variable voltage variable frequency drive, with or without machine room for the available well size, operating at 415 V 3 phase 50 cycles AC supply, Stainless Steel car entrance doors enclosures with suitable colour vinyl flooring, LED car illumination, emergency light, intercom and fan as desired by the user, central opening / side opening door with or without attendant operation, 7 segment display buttons, call register indicator, fireman drive, SS handrails inside car, full length infrared curtain in car door, automatic rescue device with batteries, voice announcing in regional/ international languages, Braille buttons with one year warranty and maintenance with necessary scaffolding and minor civil works like fixing of guide rail, counter weight etc.,The total product and services shall adhere to IS 14665/2016 ( with latest amendments) part/section 1 to 5 with regards to general guidelines of fire safety rated doors, MRLL beams, pressure switch, manual change over for doors during emergency, ARD of 10 times with sufficient battery back up and standard dimensions of chair car and door openings for all sizes and capacities of lifts including fitness certificate and duly observing all other safety norms prescribed and adhere to CPWD specifications, PCB Norms, National Electricity Code (NEC), NBC-2016, IEC and Karnataka State Lifts, Escalators and Passengers Conveyers Act 2012 and Rules 2014. The Supplier shall be registered in Government Electrical Inspectorate in the State of Karnataka. Each 2072994.15 2072994.15 1.0 False None None False None False 2072994.15 0 3870981 148332 None code15 UPS : Supplying, erecting, testing & commissioning of ON-LINE UPS system suitable for operation on 230V, 50Hz, A/C supply, with isolation transformer all accessories complete and Excluding batteries and wiring complete. 5 kVA ON LINE UPS Each 75221.3 75221.3 2.0 False None None False None False 150442.6 0 3870982 148332 None code16 Supplying, installation, testing & commissioning of 12V DC, AH batteries in poly propylene container for U.P.S. Sealed maintenance free batteries. 26 AH capacity Each 3972.1 3972.1 32.0 False None None False None False 127107.2 0 3870983 148332 None code17 TELEPHONE AND NETWORKING SYSTEM: RJ45/ I.O. outlet Cat 6 Each 370.7 370.7 70.0 False None None False None False 25949.0 0 3870984 148332 None code18 Telephone socket Each 171.6 171.6 70.0 False None None False None False 12012.0 0 3870985 148332 None code19 Supplying and drawing UTP-CAT 6E LAN cable. m 41.8 41.8 3200.0 False None None False None False 133760.0 0 3870986 148332 None code20 Supplying & Fixing of I/O Socket with back box Single I/O Each 539.0 539.0 70.0 False None None False None False 37730.0 0 3870987 148332 None code21 Supplying & Fixing of switch mounting rack with power manager & Cable manager as per standard specification 9U with 450mm depth Each 9323.6 9323.6 5.0 False None None False None False 46618.0 0 3870988 148332 None code22 Supplying fixing of Network Switches. 16 port 10/100/1000 Switch Each 7084.0 7084.0 5.0 False None None False None False 35420.0 0 3870989 148332 None code23 Supplying & fixing of ..mtrs. Cat 6Patch Cable. 2Mtr Each 282.7 282.7 70.0 False None None False None False 19789.0 0 3870990 148332 None code24 Supplying & Fixing of Patch panel for Lan Cabling. 16 Port 10/100 patch panel Each 3355.0 3355.0 5.0 False None None False None False 16775.0 0 3870991 148332 None code25 Supplying and drawing PVC flexible 2 pair telepone unarmoured tinned copper cable. m 23.1 23.1 3200.0 False None None False None False 73920.0 0 3870992 148332 None code26 Supplying and fixing of MDF krone junction box with KRONE Module / Telephone cable termination. 20 Pair Each 421.3 421.3 4.0 False None None False None False 1685.2 0 3870993 148332 None code27 EPABX:- Supply,Installation,Testing & Commissioning of micro-processor based, state of the Art, Telephone PBX System , IP READY,based on Linux/GRUB compliant, integrated Software for multiTasking for Hospitality Services including Billing ,comprising of items as below but not limited to them. Expanadable upto 100 Ports Providing PRI cards for Trunk lines / for tie line with reqd.software 16Analog Trunk Lines 4 Digital Extensions 70 Analogue Extensions( Expandable up to 100) In-Built Voicemail ( 4 Port & 80 Min) LAN Connectivity Embedded WELCOME MESSAGE Least Cost Routing Personal Assistant Music on Hold . Nos 180000.0 180000.0 1.0 False None None False None False 180000.0 0 3870994 148332 None code28 TELEPHONES Analog push button telephone with Caller ID, flash and radial Nos 1800.0 1800.0 70.0 False None None False None False 126000.0 0 3870995 148332 None code29 Supply, Installation, Testing and Commissioning of 6-core OFC - Armoured outdoor cable (SM) m 98.0 98.0 150.0 False None None False None False 14700.0 0 3870996 148332 None code30 Supplying heavy gauge PVC conduit pipe 25mm dia 2mm thick thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary. m 85.8 85.8 3500.0 False None None False None False 300300.0 0 3870997 148332 None code31 CCTV: IP DOME CAMERAS-Supplying, installation, testing and commissioning of SITC of 1/2.8*2 Megapixel Progressive CMOS,1920x1080(2MP),2.7mm13.5mm,F1.4,Motorized, with a min illumination of 0.05lux/F1.4[color,30IRE]0Lux/F1.4(IRon),30M IR distance, BLC/HLC/WDR(120db),min 2streams,compression should be H.265/H. 264H/MJPEG,128GB SD card,ONVIF Profiles,profile G&Q,POE camera,operating temperature of 60 degrees.All the cameras should have CE,FCC,UL,IP66,IK10.The prices should include the necessary mounts and brackets. Each 20200.0 20200.0 14.0 False None None False None False 282800.0 0 3870998 148332 None code32 IP BULLET CAMERAS-Supplying, installation, testing and commissioning of SITC of 1/2.8*2 Megapixel Progressive CMOS,1920x1080(2MP),2.7mm13.5mm,F1.4,Motorized, with a min illumination of 0.05lux/F1.4[color,30IRE]0Lux/F1.4(IRon),60M IR distance, BLC/HLC/WDR(120db),min 2streams,compression should be H.265/H. 264H/MJPEG,128GB SD card,ONVIF Profiles,profile G&Q,POE camera,operating temperature of 60 degrees.All the cameras should have CE,FCC,UL,IP66,IK10.The prices should include the necessary mounts and brackets. Each 21700.0 21700.0 4.0 False None None False None False 86800.0 0 3870999 148332 None code33 Supplying, installation, testing and commissioning of SITC of complete 32 channel 4K embedded network video recorder,up to 12MP(4K) resolution live view,preview,and play back,full POE Support (for up to 16 channels),internal storage supports 8HDDs expandable up to 64TB (8TB each),operating temperatures(-10 degree C) and (55 degree C),UL,CE,FCC. Each 230000.0 230000.0 1.0 False None None False None False 230000.0 0 3871000 148332 None code34 Supply and Installation of 4 TB Survalance Hard Disk The rate shall include all mounting accessories complete as required Each 14500.0 14500.0 10.0 False None None False None False 145000.0 0 3871001 148332 None code35 Supply and Installation of 16 Port L2 Managed Poe Switch The rate shall include all mounting accessories complete as required Each 40250.0 40250.0 2.0 False None None False None False 80500.0 0 3871002 148332 None code36 Supply and Installation of I/Os Each 125.0 125.0 80.0 False None None False None False 10000.0 0 3871003 148332 None code37 Supply and Installation of 2 Mtrs Patch Chord The rate shall include all mounting accessories complete as required Each 225.0 225.0 16.0 False None None False None False 3600.0 0 3871004 148332 None code38 Supply and Installation of Quad Face Plate Camera Side With IOS The rate shall include all mounting accessories complete as required Each 285.0 285.0 16.0 False None None False None False 4560.0 0 3871005 148332 None code39 Supply and Installation of 6 Core Single Mode Ofc Cable The rate shall include all mounting accessories complete as required m 98.0 98.0 50.0 False None None False None False 4900.0 0 3871006 148332 None code40 Supply and Installation of 43"LED Monitor The rate shall include all mounting accessories complete as required Each 60000.0 60000.0 1.0 False None None False None False 60000.0 0 3871007 148332 None code41 Supplying and drawing UTP-CAT 6E LAN cable Rmtr 41.8 41.8 1500.0 False None None False None False 62700.0 0 3871008 148332 None code42 Supplying heavy gauge PVC Consealed conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary. 25mm dia 2mm thick Rmtr 85.8 85.8 1200.0 False None None False None False 102960.0 0 3871009 148332 None code43 Supplying & Fixing of Patch panel for LAN cabling .24 Port 10/100 patch panel Each 4510.0 4510.0 1.0 False None None False None False 4510.0 0 3871010 148332 None code44 Supplying & Fixing of switch mounting rack with power manager & Cable manager 9U with 450mm depth Each 9323.6 9323.6 1.0 False None None False None False 9323.6 0 3871011 148332 None code45 AIR CONDITIONER: Supplying, erecting, testing and commissioning of voltage stabilizer suitable for 170 to 270 v in put and load variation from no load to full load, with over load protection, spike suppression, operating at 00 C to 400 C. Range etc., complete. 4 KVA Capacity Each 5271.2 5271.2 6.0 False None None False None False 31627.2 0 3871012 148332 None code46 Installation charges for split type air conditioner with allied works for one indoor and one outdoor unit is to be mounted on suitable Angle Iron support up to 3.0 ton split/cassette type A/C. Each 3492.5 3492.5 6.0 False None None False None False 20955.0 0 3871013 148332 None code47 Supply erection, testing, commissioning of Cassette type split Air conditioners suitable for operation on single/three phase AC supply,hermetically sealed compressor with air cooled condenser motorcapacitor start, capacitors run relay and over load protection, one ceiling mounted indoor unit and one outdoor condenser unit including standard accessories covered with insulation tube including battery operated cordless unit.2 TR Cassette 1 Ph Each 86696.5 86696.5 6.0 False None None False None False 520179.0 0 3871014 148332 None code48 EXTERNAL ELECTRICAL: Supply RCC Pole - 9 Mtr Long, 145 Kg WL as per IS- 785 Set 7288.28 7288.28 2.0 False None None False None False 14576.56 0 3871015 148332 None code49 Erection of RCC Pole - 9 Mtr Long, 145 Kg WL as per IS- 785 Set 1146.39 1146.39 2.0 False None None False None False 2292.78 0 3871016 148332 None code50 Supply of 11 kV, 45 KN Polymeric Insulator No 89.61 89.61 6.0 False None None False None False 537.66 0 3871017 148332 None code51 Erection of 11 kV, 45 KN Polymeric Insulator No 49.44 49.44 6.0 False None None False None False 296.64 0 3871018 148332 None code52 Supply of Spiral Earth Electrode No 246.17 246.17 2.0 False None None False None False 492.34 0 3871019 148332 None code53 Erection of Spiral Earth Electrode No 95.79 95.79 2.0 False None None False None False 191.58 0 3871020 148332 None code54 Supply and fixing of Caution/Danger Board No 154.5 154.5 1.0 False None None False None False 154.5 0 3871021 148332 None code55 Supply of Anti Climbing Device (12 Mtr GI Barbed Wire Each 91.67 91.67 2.0 False None None False None False 183.34 0 3871022 148332 None code56 Erection of Anti Climbing Device (12 Mtr GI Barbed Wire Each 43.26 43.26 2.0 False None None False None False 86.52 0 3871023 148332 None code57 Supply and fixing of 11 kV, 400 Amps Double Break GOS Set 21897.8 21897.8 1.0 False None None False None False 21897.8 0 3871024 148332 None code58 Supply and fixing of H-Frame for mounting GOS No 6253.13 6253.13 1.0 False None None False None False 6253.13 0 3871025 148332 None code59 Supply of DOLO Cut Out Set of 3 Nos 6051.25 6051.25 1.0 False None None False None False 6051.25 0 3871026 148332 None code60 Erection of DOLO Cut Out Set of 3 Nos 244.11 244.11 1.0 False None None False None False 244.11 0 3871027 148332 None code61 Supply, erection, testing and commissioning of 63 KVA 5Star rated Aluminium wound Distribution Transformer 11KV/433V with Off Load Tap Switch, Buchholtz relay winding temperature indicator, oil temperature indicator, , oil level indicator with + 5% to -10% Steps of 2.5%, HT and LT Cable Entry Box Type, stacked core with oil as per IS:1180(Part-1):2014 with all standard accessories as per latest IS standard No:2026/1977 and IS:335, technical specification & ESCOM approved. Each 246192.1 246192.1 1.0 False None None False None False 246192.1 0 3871028 148332 None code62 Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit should be filled with equal proportion of salt and charcoal 150 mm all-round the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI wire of size as per lSI specification 7.3.3. of IS 732 using 12 mm dia bolts, nuts, washers and check nuts etc., the pipe shall have 16 through holes of 12 mm dia No 3861.0 3861.0 8.0 False None None False None False 30888.0 0 3871029 148332 None code63 Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 25x6mm GI strip m 140.8 140.8 60.0 False None None False None False 8448.0 0 3871030 148332 None code64 Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 40x6mm Copper strip Mtr 1807.3 1807.3 60.0 False None None False None False 108438.0 0 3871031 148332 None code65 Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 600x600x3mm Copper plate Each 8163.1 8163.1 8.0 False None None False None False 65304.8 0 3871032 148332 None code66 Supply & Making of 11KV (E) Extruded "X" linked for tubing & moulded & cross-linked components using Heat Shrink Stress Control tube having High Permittivity XLPE Terminations - INDOOR & OUTDOOR JOINTING KIT & confirming to the GTP. 3x95Sqmm.Outdoor Set 4473.7 4473.7 4.0 False None None False None False 17894.8 0 3871033 148332 None code67 Supply & Making of 11KV (E) Extruded "X" linked for tubing & moulded & cross-linked components using Heat Shrink Stress Control tube having High Permittivity XLPE Terminations - INDOOR & OUTDOOR JOINTING KIT & confirming to the GTP. 3x95Sqmm.Indoor Set 3451.8 3451.8 2.0 False None None False None False 6903.6 0 3871034 148332 None code68 11 kV, 3 Core, XPLE HTUG Cable with pressure extruded inner sheeth, ROUND WIRE ARMOURED as per IS-7098 (Part-2) Armouring wires dia and Resistivity as per IS-3975. 95 Sqmm, (54 GI Wires - 2.5 mm Dia) Km 978632.6 978632.6 0.1 False None None False None False 97863.26 0 3871035 148332 None code69 Providing chain link fencing 50 mm size of 8 guage properly stretched between rectangular Poles and fixed with suitable bolts & nuts, the free ends shall be welded to the Pole and block pipe at top and bottom as required including cost of all materials, labour, lead and lifts, cutting, bending wherever necessary, wastage and lapping etc., complete as per the direction of the engineer incharge for work including two coats of approved quality paint over one coat of primer paint. Sqm 1085.7 1085.7 150.0 False None None False None False 162855.0 0 3871036 148332 None code70 LT KIOSK: Fabricating supplying and mounting MS box made out ...SWG suitable for floor I wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 2 coats of red oxide primer paint and finally finished with approved colour enameled metal paint etc., complete 16SWG Sq CM 0.47 0.47 176000.0 False None None False None False 82720.0 0 3871037 148332 None code71 Supplying .........amps rated 3phase with neutral bus bar using required capacity electrolytic aluminum strips covered with heat shrinkable coloured PVC sleeve, mounted on phenoliciFRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete. 250Amps 4x30x10mm Aluminum Strips m 3778.5 3778.5 6.0 False None None False None False 22671.0 0 3871038 148332 None code72 Supplying and fixing angle iron frame work iabricated out of M.S. angle iron.. and M.S. flat ... with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint 40x40x6mm m 335.5 335.5 12.0 False None None False None False 4026.0 0 3871039 148332 None code73 Supplying and fixing angle iron frame work iabricated out of M.S. angle iron.. and M.S. flat ... with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint 50x100x50x6mm C channel m 831.6 831.6 12.0 False None None False None False 9979.2 0 3871040 148332 None code74 Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuit in Thermal Magnetic Release. Micro processor release shall have Earth Fault as per IS-13947. (Icu=100% lcs). In 4P MCCB, all Poles should have protection for Short-Cicrcuit/Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB. MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism.FOUR POLE 160Amps 35kA Each 14791.7 14791.7 1.0 False None None False None False 14791.7 0 3871041 148332 None code75 Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220v A.C. 50 Hz 12/24v D.C Each 566.5 566.5 3.0 False None None False None False 1699.5 0 3871042 148332 None code76 D G SETS : Supplying, installing, testing and commissioning of 82.5 KVA/66kw Diesel Generator set with following specifications. Power rating as per standard reference condition as per-BS 5514 / ISO 3046 / ISO 8528 & IS 1002 / ISO 3046 Generator set specificationsEngine: Diesel generating set are rated at 1500RPM and conform to ISO 8528 specifications. The engines are radiator cooled, four stroke and multi cylinder, conforming to ISO 3046. The scope of supply includes: Electrical starter motor 12V DC Battery charging alternator, Bosch fuel system with mechanical governor, A1 Class. Spin-on lube oil filter, Spin-on dual fuel filter with water separator, Turbocharger, Charge air cooler, Silencer (Hospital grade),Dry type air cleaner, Shutoff coil, Flywheel and flywheel housing, First fill of lube oil and coolant, Safety for low lube oil pressure, Safety for high water temperature, Permissible overload of 10% for one hour in 12 hours of operation Capacity of Fuel Tank: Fuel tank suitable for 8 hours of operation 415 Volts, 0.8 pf (lag) suitable for 50 Hz, 3 phase, 4 wire systems, conforming toIS/IEC 60034-1. The Alternator is brushless type, screen protected, revolving field, self excited, self regulated through an AVR. The alternator shall have + 1.0 % Voltage regulation (max) in static conditions- IP: 23 protections with insulation class H. Mounting arrangement: Engine and alternator are mounted on a common MS fabricated base frame with AVM pads. Control Panel: The control panel is manufactured with 14/16 gauge CRCA sheet and is powder coated for weather-proof and long lasting finish. The control panel consists of the following parts:- PS0500 Controller, Aluminium bus bars with suitable capacity within/outgoing terminals, Indicating lamps for ‘Load On’ and ‘Set Running’, Instrument fuses duly wired and ferruled, MCCB of suitable rating with overload and short circuit protections. Genset Controller: microprocessor based generator set monitoring and control system. The control provides a simple operator interface to the generator set, manual and remote start/ stop control, shutdown fault indication, and an LCD hour counter. The integration of all functions into a single control system provides enhanced reliability and performance compared to conventional generator set control systems. This control has been designed and tested to meet harsh environment in which gensets are typically applied. Features, Functions, protections 16 character x 2 line alphanumeric LCD display with LED Backlight. Operator interface, Provide a record of most recent fault conditions. Fault history stored in the control non volatile memory, Provide Alternator Data. Voltage (1 ph or 3 ph line to line and line to neutral voltage, Current (1 ph or 3 ph), kVA (3 ph and total), Frequency, Provide Engine Data, Starting battery voltage, Engine running hours, Engine Temp, Engine oil pressure, Control includes provision for Service adjustment and calibration of DG control functions, Voltage, frequency selection, Configurable input and output set up, Meter calibration, Engine controls, Power Start operates on 12 VDC batteries,- Auto start mode accepts a ground signal from remote devices to automatically start the DG set. The remote start will also wake up the control system from sleep mode. Acoustic enclosure: The acoustic enclosure shall be made of 1.6 mm thick CRCA sheets in suitable approved shade and a structural/ sheet metal base frame painted in black. The walls of the enclosure are insulated with fire retardant foam so as to comply with the 75dBA at 1 mtr sound levels specified by Ministry of Environment & Forest. The enclosure has the following features: Specially designed to meet stringent MOEF/ CPCB norms of 75dBA @ 1mtr at 75% load under free field conditions, Two point lifting for easy handling at customer site, Designed to have optimum serviceability, Air inlet louvers specially designed to operate at rated load made on special purpose CNC machines Set 864585.7 864585.7 1.0 False None None False None False 864585.7 0 3871043 148332 None code77 Supply, Erection, testing and commissioning of AMF panel suitable for .....KVA DG set. The panel is of cubical type base/floor mounting control panel with hinged doors, undrilled bottom gland plate, aluminium Bus Bar with the accommodation for .....amps 4 pole contactor for alternator with thermal O/L relay,..... Amps 4 pole contactor for mains, HRC fuse for short circuit protection, Microprocessor based AMF module with supply failure timer, Restoration timer, 3 impulse automatic engine start/stop logic, Mains/generator voltage, ....capacity bypass switch and frequency sensing, PCC 1301 controller with water temperature/Lube oil pressure/ engine speed, Voltage/ampere/Frequency/ KVA, Running-hour count, No of starts, Fault indication, over / under speed, Fails to start, Low oil pleasure, High engine temperature, Under/over voltage, over current, Earth fault relay, with indications for Mains on, Load on Mains, Battery charger on Push buttons AMf module by pass Mode, Battery charger unit with inbuilt Auto/Manual and flat/Boost facility. 25 KVA Each 120484.1 120484.1 1.0 False None None False None False 120484.1 0 3871044 148332 None code78 Supply & installation of exhaust gas piping of suitable diameter as per manufactures standard welded black MS, B class pipe confirming to IS:3589 cut to required lengths and installed with necessary bends, supports and clamps, anti- vibration mountings, insulation of exhaust system with mineral wool / Rockwool, 50mm thick wire mesh & aluminum cladding etc. m 3000.0 3000.0 5.0 False None None False None False 15000.0 0 3871045 148332 None code79 Supply and laying of 2Cx2.5SQ MM and 6CX2.5 SQ MM Sheilded Sensor and control Cables m 200.0 200.0 50.0 False None None False None False 10000.0 0 3871046 148332 None code80 SOLAR POWER SYSTEM: Supply, Installation, Testing and Commissioning of ongrid Solar Photovoltaic Power Plant conforming to MNRE specifications as amended, consisting of Mono/Poly Crystalline silicon solar cells, net metering facility, necessary protections, earthing,mounted on Aluminium/GI structure of suitable strength with followingcomponents complete as required:-a) Solar Photovoltaic Module of capacity 330 Wp or above, manufactured in India,conforming to IS 14286/IEC 61215, IS/IEC 61730-Part-1, IS/IEC 61730-Part-2. SolarPhotovoltaic Module conversion efficiency shall not be less than 16.5%. PV modulesused in solar power plants/ systems must be warranted for their output peak wattcapacity, which should not be less than 90% at the end of 10 years and 80% at theend of 25 years.b) Power Conditioning Unit (PCU) of 350-800 V DC Input voltage range and 400 VAC, three phase, 4 wire, 50Hz +/- 2.5 Hz, output voltage suitable to generate ACPower with efficiency not less than 97%, total harmonic distortion less than 3% and suitable for ambient temperature from 0 to 50 degree C. The PCU shall adjust the voltage and frequency level to suit the Grid Voltage Frequency. c) Data Monitoring System complete with accessories. d) Fixing of Array junction box & Main junction box with IP 65 protection and termination arrangement for incoming and outgoing cable along with glands, lugs and other accessories etc. as required. e) Lightning and surge voltage protection. f) Connections & Interconnections by supplying & fixing required size XLP insulated copper conductor 1.1 kV grade armoured power and control cables between solar modules, main power cable to grid supply PCU unit along withsupplying & fixing of necessary channel/conduit lugs and other accessories etc. as required Kwhr 67166.0 67166.0 10.0 False None None False None False 671660.0 0 3871047 148332 None code81 FIRE FIGHTING : Supply, erection, testing & commissioning of electrical motor driven end suction back pull out centrifugal pump capable of delivering,adequate LPM at required head. when running at 2900 rpm directly coupled to TEFC electrical motor of adequate HP to operate on 400/440 V 3 phase, 50 cycles AC supply with required foundation for pump, a terminal box suitable for reception, common bed plate with necessary anti vibration pads, necessary foundation bolts and accessories,neoprine gaskets (16 kg/sq.cm) Control panel is excluded.Required GA drawingfor the pump/ foundation shall be submitted by the contractor. (2280 lpm at 70m head) No 313500.0 313500.0 1.0 False None None False None False 313500.0 0 3871048 148332 None code82 Supply, installation, testing & commissioning of diesel engine driven pump, horizontal mounted, Horizontal spiltcase centrifugal single stage pump, capable of delivering required flow at required head when running at 1800 RPM with adequate BHP automatic diesel engine driven pumpset having the residential silencer system and other accessories like fuel tank, necessary radiator cooling system, flanges, neoprene gaskets (16.0 kg/sqcm), 200 litres fuel storage tank with piping, valves as per detailed specification and two separate starting mechanisms (automatic starting by battery power, electric starting motor as well as manual starting by electric start motor) common bed plate with anti vibration pads, necessary foundation, foundation bolts etc., complete in all respects as per the detailed specifdication. Control panel excluded. Required GA drawingfor the pump shall be submitted by the contractor. Required GA drawingfor the pump/ foundation shall be submitted by the contractor.(2280 lpm at 70m head) No 616000.0 616000.0 1.0 False None None False None False 616000.0 0 3871049 148332 None code83 Supply, Installation, testing and commisioning electrically driven jockey pump of capacity 180.0 Lpm at required head end suction type bronze impeller pump oupled to electrical driven motor with suitable HP with all the necessary accessories, operating on 3Ph 50Hz, 400/440 V AC supply including foundation, foundation bolts, anti vibration pad,etc. complete. Including cost of materials, labour, usage charges of machinery complete as per specifications. Control panle is excluded. Required GA drawingfor thepump/ foundation shall be submitted by the contractor.(180 lpm at 70m head) No 93500.0 93500.0 1.0 False None None False None False 93500.0 0 3871050 148332 None code84 Supplying Installing testing and commissiong COMMON Control panel for fire fighting system consiting of electrical motor driven 60HP Main fire pump, Diesel engine driven pump 60 HP Sprinkler pump 50HP & Jockey pump 25HP Unit 305800.0 305800.0 1.0 False None None False None False 305800.0 0 3871051 148332 None code85 Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13039 of following sizes as required 150mm dia Nos 13750.0 13750.0 9.0 False None None False None False 123750.0 0 3871052 148332 None code86 Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13039 of following sizes as required 100mm dia Nos 9900.0 9900.0 5.0 False None None False None False 49500.0 0 3871053 148332 None code87 Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13039 of following sizes as required 80mm dia Nos 9900.0 9900.0 2.0 False None None False None False 19800.0 0 3871054 148332 None code88 Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :150 mm dia Nos 12650.0 12650.0 6.0 False None None False None False 75900.0 0 3871055 148332 None code89 Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :100 mm dia Nos 7832.0 7832.0 2.0 False None None False None False 15664.0 0 3871056 148332 None code90 Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :80 mm dia Nos 6050.0 6050.0 2.0 False None None False None False 12100.0 0 3871057 148332 None code91 Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange.200mm dia No 26950.0 26950.0 3.0 False None None False None False 80850.0 0 3871058 148332 None code92 Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :100 mm dia No 13629.0 13629.0 1.0 False None None False None False 13629.0 0 3871059 148332 None code93 Supplying and fixing air vessel made of 250 mm dia, 8mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and painting with synthetic enamel paint of approved shade as required. No 33000.0 33000.0 1.0 False None None False None False 33000.0 0 3871060 148332 None code94 Pressure guage of 150 mm dia including Isolation Valve and forged siphon Tube including with all accssories as per IS:Spec. No 3190.0 3190.0 3.0 False None None False None False 9570.0 0 3871061 148332 None code95 Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required. Nos 2145.0 2145.0 6.0 False None None False None False 12870.0 0 3871062 148332 None code96 Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished seamless type tubes including cost of materials,labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Kg 161.7 161.7 300.0 False None None False None False 48510.0 0 3871063 148332 None code97 FIREFIGHTING ELECTRICALSupply of the Following XLPE armoured cable 1100 V Grade with ISI mark stranded / solid, aluminimum conductor complete with crimping type Lugs and Glands etc completed. - 3.5 Core 95.00 Sq.mm.Main Panel Electrical Pump Km 565444.0 565444.0 0.1 False None None False None False 56544.4 0 3871064 148332 None code98 4.0 Core 16.00 Sq.mm.Main Panel to Jockey Km 201786.2 201786.2 0.2 False None None False None False 40357.24 0 3871065 148332 None code99 12 Core x 2.5Sqmm For Main Panel to DG m 580.0 580.0 50.0 False None None False None False 29000.0 0 3871066 148332 None code100 3 Core x 1.5Sqmm for Pressure Switch m 104.5 104.5 70.0 False None None False None False 7315.0 0 3871067 148332 None code101 Supplying, installation, testing & commissioning of 12V ..AH batteries in poly propylene container for D.G. sets. Low maintenance batteries, plate type. (150 AH capacity) Nos 31005.7 31005.7 1.0 False None None False None False 31005.7 0 3871068 148332 None code102 Supplying and installing following size of perforated painted with powder cating m.s. cable trays with perforation not more than 17.5% in convenient sections, joined with connectors, suspended from the ceiling with m.s. suspenders including bolts & nuts, painting suspendrrs etc as required. m 854.7 854.7 100.0 False None None False None False 85470.0 0 3871069 148332 None code103 GI/Copper strips for grounding connections, using necessary fixing materials as required. (25 x 3 mm GI strip) m 90.2 90.2 150.0 False None None False None False 13530.0 0 3871070 148332 None code104 Supplying Installing, testing and commissioning of Gun metal AIR RELEASE VALVE SIZE OF 25mm dia including cost of materials, labour, usage charges of machinery complete as per specifications. complete Each 1650.0 1650.0 1.0 False None None False None False 1650.0 0 3871071 148332 None code105 SITC of Gun metal BALL VALVE SIZE OF 25mm dia ---- etc., complete as per specificaiton with all lead and lift, loading unloading, labour, hire charges of machineries and all such incidental charges necessary for successful completion of work and as per directions of the Engineer-in-charge of the work Nos 1320.0 1320.0 8.0 False None None False None False 10560.0 0 3871072 148332 None code106 SITC of Gun metal BALL VALVE SIZE OF 19/20 mm dia ---- etc., complete as per specificaiton with all lead and lift, loading unloading, labour, hire charges of machineries and all such incidental charges necessary for successful completion of work and as per directions of the Engineer-in-charge of the work Nos 1045.0 1045.0 8.0 False None None False None False 8360.0 0 3871073 148332 None code107 FIRE HYDRANT & SPRINKER SYSTEM : Supply, Installation testing and commissioning of approved make heavy quantity (Class 'C') confirming to as per IS1239 Such as Tees elbows check nuts unions,Flanger, Nipples etc. including cutting welding, Trending fixing on walls, cealing (Using 41-Tech pipe/M.S.angle supports work includes two coats of metal primer and two coats of Red enamel paint etc - 150 mm dia m 4290.0 4290.0 200.0 False None None False None False 858000.0 0 3871074 148332 None code108 do - 100 mm dia m 3135.0 3135.0 120.0 False None None False None False 376200.0 0 3871075 148332 None code109 do - 80 mm dia m 2530.0 2530.0 100.0 False None None False None False 253000.0 0 3871076 148332 None code110 Wraping and Galing of U/G pipe line work includes one coat of anti corrossion paint (Black) and two coats of Bituminous cloth. including cost of materials, labour, usage charges of machinery complete as per specifications. - 150 mm dia m 440.0 440.0 200.0 False None None False None False 88000.0 0 3871077 148332 None code111 Wraping and Galing of U/G pipe line work includes one coat of anti corrossion paint (Black) and two coats of Bituminous cloth. including cost of materials, labour, usage charges of machinery complete as per specifications. - 100 mm dia m 275.0 275.0 50.0 False None None False None False 13750.0 0 3871078 148332 None code112 Supplying, installing , testing and commissioning approved make CI butterfly valves of 100mm diameter confirming to IS 13039 with necessary nuts & bolts etc., complete ---- etc., complete as per specificaiton with all lead and lift, loading unloading, labour, hire charges of machineries and all such incidental charges necessary for successful completion of work and as per directions of the Engineer-in-charge of the work Nos 9900.0 9900.0 5.0 False None None False None False 49500.0 0 3871079 148332 None code113 Supplying, installing , testing and commissioning approved make CI butterfly valves of 50mm diameter confirming to IS 13039 with necessary nuts & bolts etc., complete ---- etc., complete as per specificaiton with all lead and lift, loading unloading, labour, hire charges of machineries and all such incidental charges necessary for successful completion of work and as per directions of the Engineer-in-charge of the work Nos 4950.0 4950.0 5.0 False None None False None False 24750.0 0 3871080 148332 None code114 Providing & fixing Flow Switch in following sizes M.S. pipe including connnection etc as required.150mm dia Each 9923.1 9923.1 5.0 False None None False None False 49615.5 0 3871081 148332 None code115 Providing, fixing, testing & commissioning ofinstallation control valve of cast iron body,brass/bronze working parts comprising of water motor alarm, bronze seat clapper, clapper arm andhydraulically driven mechanical gong bell to sound continuous alarm when the wet riser/sprinkler system activates, pressure gauges, emergency releases, strainer, pressure switch, cock valve complete with drain valve and bypass, test control box, ball valves, MS pipe of required size, flanges, orifice plate, gasket etc of follwing sizes as required : 150mm dia Each 77000.0 77000.0 1.0 False None None False None False 77000.0 0 3871082 148332 None code116 Supplying Installing, testing and commissioning of 150mm dia 4 way Fire brigade inlet connection with Non retrn valve of 4 nos. 63 mm dia. including cost of materials, labour, usage charges of machinery complete as per specifications. No 41800.0 41800.0 1.0 False None None False None False 41800.0 0 3871083 148332 None code117 Supplying Installing, testing and commissioning of 100mm dia 2 way Fire brigade inlet connection of 2 nos. 63 mm dia. including cost of materials, labour, usage charges of machinery complete as per specifications. No 36300.0 36300.0 1.0 False None None False None False 36300.0 0 3871084 148332 None code118 FIRE HYDRANT SYSTEM Supplying Installing, testing and commissioning of 63mm dia single headed Gun mental Hydrant Valve with flanged inlet, stop valve,spindle and cast iron hand wheel. It has a female instantaneous outlet with Blank Cap and is Hydrostatically tested to 21 Kgf/cm2 pressure having a flow rate of 900 LPM at 7 Kgf/cm 2 of pressure with blank cap and wheel as per IS 5290 etc. complete including cost of materials, labour, usage charges of machinery complete as per specifications. No 11550.0 11550.0 5.0 False None None False None False 57750.0 0 3871085 148332 None code119 Supplying Installing, testing and commissioning of63mm mm dia double headed Gun mental Hydrant Valve with flanged inlet 2Nos, stop valve, spindle and cast iron hand wheel. It has a 2 Nos female instantaneous outlet with blank cap and is hydrostatically tested to 21 Kgf/cm2 pressure having a flow rate of 900 LPM at 7 Kgf/cm2 of pressure confirms to IS : 2190 with blank cap and wheel as per IS 5290 etc. including cost of materials, labour, usage charges of machinery complete as per specifications. complete No 20350.0 20350.0 5.0 False None None False None False 101750.0 0 3871086 148332 None code120 Supplying Installing, testing and commissioning of Reinforced Rubber Lined 2nos .RRL Fire hose of 63mm dia 15m length as per IS 8423 binded with one set of male and Female lnstantainious Gun metal coupling as per IS 903 complete including cost of materials, labour, usage charges of machinery complete as per specifications. Each 5500.0 5500.0 20.0 False None None False None False 110000.0 0 3871087 148332 None code121 Supplying Installing, testing and commissioning of Gun metal Branch pipe size of 63mm dia x19mm dia as per IS 903 complete including cost of materials, labour,usage charges of machinery complete as per specifications. Each 4950.0 4950.0 10.0 False None None False None False 49500.0 0 3871088 148332 None code122 Supplying Installing, testing and commissioning of Hose cabinet made out of 18 gauge M.S.sheet with double glass door with lacing arrangement and painted with two coats of Fire red Enamel paint at outer ise of the Box and two coats of white enamel paint at inner side of the box is to accomodated 2 Nos. of Fire hose box size 20"x24"x10" complete including cost of materials, labour, usage charges of machinery complete as per specifications. Each 7150.0 7150.0 5.0 False None None False None False 35750.0 0 3871089 148332 None code123 Supplying Installing, testing and commissioning of Hose reel cabin Each 5610.0 5610.0 5.0 False None None False None False 28050.0 0 3871090 148332 None code124 Supplying Installing, testing and commissioning of 19mm dia 40.0m length hose with rubber lining smooth bore, reinforced of natural/synthetic fibres, a rubber cover finish shall be smooth, fluted or fabric marked with minimum thickness of 1.50mm and to with stand a working pressure of 10Kgf/sqcm confirms & tested as per IS 444/ IS 12585 including cost of materials, labour, usage charges of machinery complete as per specifications Each 5720.0 5720.0 5.0 False None None False None False 28600.0 0 3871091 148332 None code125 Supplying Installing, testing and commissioning of Gun metal AIR RELEASE VALVE SIZE OF 25mm dia including cost of materials, labour, usage charges of machinery complete as per specifications. complete Each 1650.0 1650.0 1.0 False None None False None False 1650.0 0 3871092 148332 None code126 SITC of Gun metal BALL VALVE SIZE OF 25mm dia ---- etc., complete as per specificaiton with all lead and lift, loading unloading, labour, hire charges of machineries and all such incidental charges necessary for successful completion of work and as per directions of the Engineer-in-charge of the work Nos 1320.0 1320.0 5.0 False None None False None False 6600.0 0 3871093 148332 None code127 Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof. Nos 344.3 344.3 20.0 False None None False None False 6886.0 0 3871094 148332 None code128 Supplying Installing, testing and commissioning of approved make 15mm dia sprinkler bulb pendent/wall mounted type designed to operate 68 degrees centegrad Make Tyco/HD FIRE complete (Colour code of bulb liquid inside Glass bulb type Pendents As per IS 9972: 57COrange, 68C - Red, 79C - Yellow, 93C - Green, 141C - Blue, 182C Mauve, 227/260C - Black) Each 412.5 412.5 1.0 False None None False None False 412.5 0 3871095 148332 None code129 Stainless steel braided flexible pipe (hose) for dropping sprinklers below false ceiling, pipe shall be 16 bar pressure rating and 1500 mm long 25 mm dia with union / reducer collar, clamps etc. as required. Each 2750.0 2750.0 1.0 False None None False None False 2750.0 0 3871096 148332 None code130 Supplying Installing, testing and commissioning of Ceiling Mounted powder coated Surface Finishing Mild Steel Rosette Plate including cost of materials, labour, usage charges of machinery complete as per specifications Each 121.0 121.0 1.0 False None None False None False 121.0 0 3871097 148332 None code131 Supply, Erection, Testing & commissioning of MS Forged Tees & Collar ---- etc., complete as per specificaiton with all lead and lift and as per directions of the Engineer-in-charge of the work - Socket Elbow 25/15 Nos 180.0 180.0 50.0 False None None False None False 9000.0 0 3871098 148332 None code132 do - Socket Elbow 25/25 Nos 180.0 180.0 50.0 False None None False None False 9000.0 0 3871099 148332 None code133 do - Socket Tee 25/15/25 Nos 250.0 250.0 40.0 False None None False None False 10000.0 0 3871100 148332 None code134 do - Socket Tee 25/25/25 Nos 250.0 250.0 50.0 False None None False None False 12500.0 0 3871101 148332 None code135 do - Socket Tee 32/15/32 Nos 350.0 350.0 20.0 False None None False None False 7000.0 0 3871102 148332 None code136 do - Socket Tee 32/25/32 Nos 310.0 310.0 40.0 False None None False None False 12400.0 0 3871103 148332 None code137 do - Socket Tee 40/15/40 Nos 450.0 450.0 50.0 False None None False None False 22500.0 0 3871104 148332 None code138 do - Socket Tee 40/25/40 Nos 450.0 450.0 50.0 False None None False None False 22500.0 0 3871105 148332 None code139 do - Forged Collar 25/15 Nos 110.0 110.0 311.0 False None None False None False 34210.0 0 3871106 148332 None code140 Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished seamless type tubes including cost of materials,labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Kg 161.7 161.7 1000.0 False None None False None False 161700.0 0 3871107 148332 None code141 FIRE EXTINGUSHERS & SIGN BOARD: CO2 2Kg Squeeze grip Providing 2 Kg C02 Gas Type Fire Extinugisher Squeeze grip type, used Unused Mechanism, Squeeze Grip, Gross Weight 9.1 Kg. empty Weight 7.1 Kg. Can Height 595MM Diameter 108MM, Discharge Time less than 8 Sees, Controllable discharge mechanism, Applicable on Class 8&C Fire, 8 Rating 88, Can Construction : Hot spinning/Forging, Valve Construction : Forging & Machining, Internal Coating of Can : Not Applicable, External coating of Can : Spray Painting, Sheet metal thickness: 4.0MM lSI Approved, 1 Year Warranty.with instalert system with Superior quality EPDM Rubber Hosepipe etc., including cost of materials, labour, usage charges of machinery complete as per specifications. complete Each 6050.0 6050.0 10.0 False None None False None False 60500.0 0 3871108 148332 None code142 Providing Water Mist 4 Kg CO2 Gas Type Fire Extinguisher, used Unused Mechanism, Squeeze Grip , Gross Weight 9.1 Kg. empty Weight 7.1 Kg. Can Height 600MM Diameter 108MM, Discharge Time less than 8 Secs, Controllable discharge mechanism, Applicable on Class B&C Fire, B Rating 13B, Can Constructing : Hot spinning/Forging, Value Construction : Forging & Machining, Internal Coating of Can : Not Applicable, External coating of Can : Spray Painting, Sheet metal thickness : 4.0MM ISI Approved, 1 Year Warranty. ---- With all Lead & Lifts etc., complete. as per the detailed specifications and the Directions of Engineer In charge of the work Each 9500.0 9500.0 5.0 False None None False None False 47500.0 0 3871109 148332 None code143 Providing Aqueous Film-Forming Foam - 9 Ltr Providing 9 Ltr Fire Extinugisher Aqueous Film-Forming Foam Type, Stored Pressure Type, Pressure Gauge, Gross Weight 15.1Okg. empty weight 6.10kg Can Height 615 MM, Diameter 175 MM, Discharge Time less than 60 Sees, Controllable discharge mechanism (Squeeze grip with easy snap safety seal), Range minimum 6 Meters, applicable on Class A,8,CARating 13A, 8 Rating 558, Can Construction;Deep drawn & CO, Mig welded, Valve Construction: Forging & Machining, Internal Coating of Can : Epoxy Powder coating, External Coating of Can : Epoxy PoIyster Powder coating, Sheet metal thickness: 2.0MM, lSI and EN Approved, Helium Leak Detection Tested, 1 Years Warranty with instalert system with Superior quality EPDM Rubber Hosepipe etc., including cost of materials, labour, usage charges of machinery complete as per specifications. complete Each 8910.0 8910.0 2.0 False None None False None False 17820.0 0 3871110 148332 None code144 Providing ABC Powder based MAP 50, 6Kg:-Providing 6kg Fire Extinguisher Mono Ammonium Phos phate Powder 50, Stored Pressure Type, Pressure Gauge, Gross Weight 9.5 Kg, empty weight 3.5 Kg, Can Height 435MM, Diameter 160MM, Discharge Time less than 9 Sees, Controllable discharge mechanism (Squeeze grip with easy snap safety seal), Range minimum 4 meters, applicable on Class A,8,C and electrically started Fire, A Rating 3A, 8 Rating 218, Can construction : Deep drawn & Co., Mig welded, valve Construciton : Forging and Mechining, Internal Coating of Can: Epoxy powder coating, External Coating of Can: Epoxy PoIyster power coating, Sheet metal thickness: 1.60MM, 5 years Warranty with instalert system with Superior quality EPDM Rubber Hosepipe etc., including cost of materials, labour, usage charges of machinery complete as per specifications. complete. IS 15683 Approved, Each 3135.0 3135.0 10.0 False None None False None False 31350.0 0 3871111 148332 None code145 Supply, installation in position, testing and commissioning of 4.5Kg C0 Gas Type Fire Extinugisher, Trolley Mounted, 2 Easy Weight Management used Unused Mechanism, Squeeze Grip, Gross Weight 19.1 Kg. empty Weight 14.6 Kg. Can Height 860MM Diameter 140MM, Discharge Time less than13 Sees, Controllable discharge mechanism, Applicable on Class 8&C Fire, 8 Rating 138, Can Constuctin : Hot spinning/Forging, Valve Construction : Forging & Machining, Internal Coating of Can : Not Applicable, External coating of Can : Spray Painting, Sheet metal thickness : 4.5M M lSI Approved 1Year Warranty. with instalert system with Superior quality EPDM Rubber Hosepipe etc., including cost of materials, labour, usage charges of machinery complete as per specifications. complete Each 7150.0 7150.0 8.0 False None None False None False 57200.0 0 3871112 148332 None code146 Supplying of two bucket stand alongwith buckets. complete Each 1210.0 1210.0 5.0 False None None False None False 6050.0 0 3871113 148332 None code147 Providing and fixing in position the following type of sign boards made out of 3mm thick "Opaque" PVC foam board with computer cut, PVC non-reflective self adhesive vinyl painted foam board, complete with mirror fasteners.: Providing's Escape Singage Photoluminescent rigid plastic, 2 mm thickness, Printed on High Quality glass paint with UV resistance, 5 years warranty, Material Used - Non Radiocactive, non-phosphorous, non toxic and lead free. Available in different types & sizes, Time after removing the light source (in minutes) 60 minutes, Luminescent intensity (milicandelas * per square meter - mcd/sqm) : 30 mcd/sqm.Luminescent Intensity greater than 0.32 mcd/sqm, Period of Light Decay* (In Minutes) :3100, including cost of materials, labour, usage charges of machinery complete as per specifications.(Signage with the following text "IN CASE OF FIRE, USE STAIRS UNLESS INSTRUCTED OTHERWISE" Size:-25cm x 30 cm) Sq CM 2.2 2.2 3750.0 False None None False None False 8250.0 0 3871114 148332 None code148 Providing's Escape Singage Photoluminescent rigid plastic, 2 mm thickness, Printed on High Quality glass paint with UV resistance, 5 years warranty, Material Used - Non Radiocactive, non-phosphorous, non toxic and lead free. Available in different types & sizes, Time after removing the light source (in minutes) 60 minutes, Luminescent intensity (milicandelas * per square meter - mcd/sqm) : 30 mcd/sqm.Luminescent Intensity greater than 0.32 mcd/sqm, Period of Light Decay* (In Minutes) :3100, including cost of materials, labour, usage charges of machinery complete as per specifications.(Floor identification signage ( ie, GROUND FLOOR …etc.) at each stair enclosure on every floor, indicating the floor number in words, lettering size shall be 7.5 cm with contrasting colour from back ground.Size shall be 15cm x 60cm.) Sq CM 2.2 2.2 4500.0 False None None False None False 9900.0 0 3871115 148332 None code149 Providing's Escape Singage Photoluminescent rigid plastic, 2 mm thickness, Printed on High Quality glass paint with UV resistance, 5 years warranty, Material Used - Non Radiocactive, non-phosphorous, non toxic and lead free. Available in different types & sizes, Time after removing the light source (in minutes) 60 minutes, Luminescent intensity (milicandelas * per square meter - mcd/sqm) : 30 mcd/sqm.Luminescent Intensity greater than 0.32 mcd/sqm, Period of Light Decay* (In Minutes) :3100, including cost of materials, labour, usage charges of machinery complete as per specifications.(signage with text FIRE EXIT,Size shall be 15cm x 60cm.) Sq CM 2.2 2.2 4500.0 False None None False None False 9900.0 0 3871116 148332 None code150 Providing and fixing in position the signages "FIRE ORDER" it should contain the following text on 3mm thick "Opaque" PVC foam board of computerized cut, PVC non-reflective self adhesive vinyl painted foam board of size 3' x 4'.A) ALERT THE SECURITY AT SECURITY ROOM BY ACTUATING MANUAL CALL POINT LOCATED AT STRATEGIC LOCATIONS. B) EVACUATE THE OCCUPANTS BY USING FIRE EXITS AND EMERGENCY EXITS ONLY AND ASSEMBLE AT VARIOUS ASSEMBLY POITS. C) IF POSSIBLE TRY TO EXTINGUISH THE FIRE BY USING NEAREST / SUITABLE PORTABLE EXTINGUISHER OR WATER FROM NEAREST WET RISER. D) BE CALM AND DO NOT GIVE ANY ROOM FROM PANIC, WALK, DO NOT RUN. E) IF YOU ENCOUNTER SERIOUS DIFFICULTY IN EVACUATION, LIE DOWN FLAT AND TRY TO ATTRACT ATTENTION OF RESCUE TEAM. Each 2750.0 2750.0 5.0 False None None False None False 13750.0 0 3871117 148332 None code151 ACTION BY SECURITY/RECEPTION UPON RECEIPT OF INFORMATION THROUGH FIRE ALARM OR FIRE DETECTORS OR BY USING PUBLIC ADDRESS SYSTEM. A) ALERT THE OCCUPANTS BY USING PUBLIC ADDRESS SYSTEM. B) INFORM FIRE CONTROL THROUGH ANY ONE OF THE FOLLOWING PHONE NUMBERS: (Current phone numbers to be provided in this location by the contractor). C) REFER EVACUATION PLAN FROM EVACUATING STANDARD PEOPLE. D) GUIDE THE FIRE FORCE, ON THEIR ARRIVAL TO THE SEAT OF FIRE. E) IN CASE OF THE CASUALTIES, CALL AMBULANCE BY DIALLING NUMBER: (Current phone numbers to be provided in this location by the contractor). F) FIRE FIGHTING AGENCY: PHONE (Current phone numbers to be provided in this location by the contractor). FAX : (Current fax numbers to be provided in this location by the contractor) Each 2750.0 2750.0 5.0 False None None False None False 13750.0 0 3871118 148332 None code152 Providing's Escape Singage Photoluminescent rigid plastic, 2 mm thickness, Printed on High Quality glass paint with UV resistance, 5 years warranty, Material Used - Non Radiocactive, non-phosphorous, non toxic and lead free. Available in different types & sizes, Time after removing the light source (in minutes) 60 minutes, Luminescent intensity (milicandelas * per square meter - mcd/sqm) : 30 mcd/sqm.Luminescent Intensity greater than 0.32 mcd/sqm, Period of Light Decay* (In Minutes) :3100, including cost of materials, labour, usage charges of machinery complete as per specifications.(route plan Fire Escape Route Plan A2 Size) Sq CM 2.2 2.2 9000.0 False None None False None False 19800.0 0 3871119 148332 None code153 TWO WAY TACK BACK & PA SYSTEM: Supply installation testing commissioning of P.A System Rack made out of 18 gauge M.S. Sheet with glass door with locking arrangement and powder coating grey paint two coats at inner and outer of box, is to accomodated 1 No. 250 watt amplifire, 1 No. 40 zone console and 1 no Mike and in built electronic connections circuits.Size or Rack: 0.50 m hight x 0.40 m width x 0.40 m depth ---- including all lead and lift charges loading and unloading charges labour charges, curing, cost& conveyance of all materials, transportation charges, all incidental charges, hire charges of all machinery and equipment required for successful completion of work etc., complete. The work shall be executed as per standard technical specification and directions of Engineer in charge of the work Nos 49500.0 49500.0 1.0 False None None False None False 49500.0 0 3871120 148332 None code154 Supplying Installing, testing and commissioning of P.A.System console panel with push button with speaker and indictoron Accomdated in M.S.Cabinet with painting -do- 40 Zone cansole. Complete Nos 89100.0 89100.0 1.0 False None None False None False 89100.0 0 3871121 148332 None code155 P.A.System amplifier 250W RMS out put with complete wiring and controls accessable form front Nos 38775.0 38775.0 1.0 False None None False None False 38775.0 0 3871122 148332 None code156 Supplying Installing, testing and commissioning of MIKE Each 6050.0 6050.0 1.0 False None None False None False 6050.0 0 3871123 148332 None code157 Supplying Installing, testing and commissioning of Public address system (Two way comminication type) as per requirement of Fire Force authority and which Generally comprise of Supplying Installing, testing and commissioning of Approved make 5W.wall mounted speaker with talk back facility with store enamel painted M.S.Sheet hosing etc. complete including cost of materials, labour, usage charges of machinery complete as per specifications. Each 2695.0 2695.0 5.0 False None None False None False 13475.0 0 3871124 148332 None code158 SupplyingheavygaugePVCconduitpipe......mmdia..........mmthickconfirmingtoIS2509withsuitablesizebends,metal/PVCJunctionboxes,adhesivepasteetc.,andrunningbeforeconcretingtheslab.TheconduitshouldbetiedtothereinforcementrodsbyusingbindingwiresandunusedwaysofjunctionboxesandpipeendsshouldbecoveredusingPVCendenclosures,runwith18SWGGIfishwirewherever necessary(19/20 mm dia 2 mm thick) m 75.9 75.9 1000.0 False None None False None False 75900.0 0 3871125 148332 None code159 Wiringforlighting/powercircuitusingoneofFRLSPVCinsulated1100Vgrade,multistrandcopperwirewithlowconductorresistancesinglecoreinopenorconcealedsystemofwiringwithspecifiedIS-694:2010 (1.5 mm2) m 28.6 28.6 2000.0 False None None False None False 57200.0 0 3871126 148332 None code160 FIRE ALARM SYSTEM: Supply, Installation, Testing & Commissioning of Analogue Addressable loop powered Sounder & Beacon  with inbuilt isolator and  having Min 15 distinct sound patterns/ multitone to indicate Exit doors and direct occupants for safe and fast evacuation and 100dB output with minimum 1Hz Frequency flash rate designed for IP65 requirements and approved to operate in 10C to +55C temperature, complies with the essential requirement of the EMC Directive to be supplied with Junction Box, Glands and other mounting accessories for proper installation. (For Detectors/Device without inbuilt isolator, Fault Isolator or Isolator base to be provided with each detector/device) Approval: VDS/UL/EN54. Make: Advanced (UK),Simplex, Notifier,Argus(Uk) Each 5390.0 5390.0 5.0 False None None False None False 26950.0 0 3871127 148332 None code161 Supplying Installing, testing and commissioning of Resettable type Manual Call point . works on 24V DC LED indicator with glass Fronted. Fire Symbol .The red Manual Call Point is approved to EN54-11 standard. MECHANICAL CONSTRUCTION The component parts of the call point are moulded in polycarbonate or ABS, depending on their function. Each 3300.0 3300.0 5.0 False None None False None False 16500.0 0 1724827882000 1 None None Buildings Proposed Construction of KSIC Bhavan at Queens Road, Bangalore City. 8812234.9 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3871128 148333 None code1 FIRST FLOOR : Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes Form work, all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates - COLUMNS Cum 12924.37 12924.37 32.508 False None None False None False 420145.41996 0 3871129 148333 None code2 do - LIFT CORE WALL Cum 12924.37 12924.37 10.416 False None None False None False 134620.23792 0 3871130 148333 None code3 do - RCC BEAMS Cum 12164.11 12164.11 46.297 False None None False None False 563161.80067 0 3871131 148333 None code4 do - RCC SLAB Cum 11403.85 11403.85 61.26 False None None False None False 698599.851 0 3871132 148333 None code5 do - RCC STAIRCASE Cum 11403.85 11403.85 3.7395 False None None False None False 42644.697075 0 3871133 148333 None code6 do - LINTELS Cum 12164.11 12164.11 4.5329 False None None False None False 55138.694219 0 3871134 148333 None code7 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates.Including FormWork Cum 10680.59 10680.59 3.256 False None None False None False 34776.00104 0 3871135 148333 None code8 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Tonne 99486.71 99486.71 23.154 False None None False None False 2303515.28334 0 3871136 148333 None code9 Extra for providing throating or drip moulding to RCC chejjas with plastering ( labour charges only ) as per specifications. Specification No . KBS Rmtr 36.66 36.66 35.1 False None None False None False 1286.766 0 3871137 148333 None code10 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. Sqm 1455.41 1455.41 398.604 False None None False None False 580132.24764 0 3871138 148333 None code11 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. Sqm 1226.54 1226.54 113.778 False None None False None False 139553.26812 0 3871139 148333 None code12 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification.-do- 35 mm thick both side Commercial Sqm 3690.74 3690.74 22.68 False None None False None False 83705.9832 0 3871140 148333 None code13 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. Cum 109783.46 109783.46 0.6749 False None None False None False 74092.857154 0 3871141 148333 None code14 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. Nos 1128.77 1128.77 9.0 False None None False None False 10158.93 0 3871142 148333 None code15 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Handles 300mm No 611.05 611.05 18.0 False None None False None False 10998.9 0 3871143 148333 None code16 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Aldrop 16mm dia, 300mm No 416.62 416.62 9.0 False None None False None False 3749.58 0 3871144 148333 None code17 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Tower Bolts 200x10mm No 166.65 166.65 18.0 False None None False None False 2999.7 0 3871145 148333 None code18 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS hinges 100 mm No 77.77 77.77 36.0 False None None False None False 2799.72 0 3871146 148333 None code19 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Door stopper 75mm No 111.1 111.1 9.0 False None None False None False 999.9 0 3871147 148333 None code20 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. No 1168.77 1168.77 9.0 False None None False None False 10518.93 0 3871148 148333 None code21 Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Fastener with threaded dia 12 mm Nos 66.66 66.66 54.0 False None None False None False 3599.64 0 3871149 148333 None code22 Supplying and fixing new teak wood beads wherever necessary including cost of materials, labour, complete as per specifications. Rmtr 57.77 57.77 52.6499 False None None False None False 3041.584723 0 3871150 148333 None code23 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) Sqm 7481.47 7481.47 28.7999 False None None False None False 215465.587853 0 3871151 148333 None code24 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) Sqm 6353.8 6353.8 2.025 False None None False None False 12866.445 0 3871152 148333 None code25 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding Kg 186.64 186.64 647.3249 False None None False None False 120816.719336 0 3871153 148333 None code26 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 850 kg/m3, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-InCharge. (Fixtures shall be paid for separately)Size 62 x 100mm m 779.92 779.92 19.2 False None None False None False 14974.464 0 3871154 148333 None code27 Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) having minimum density of 650 kg/m3 and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength of 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws The cost includes cost of materials, transportation, labour and fixing charges.(Cost of Fixtures to be paid separately)30 mm thickness Sqm 3871.83 3871.83 5.76 False None None False None False 22301.7408 0 3871155 148333 None code28 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. Nos 1237.65 1237.65 19.0 False None None False None False 23515.35 0 3871156 148333 None code29 Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge... ( Inside) Sqm 346.63 346.63 771.798 False None None False None False 267528.34074 0 3871157 148333 None code30 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. Sqm 111.1 111.1 1137.7574 False None None False None False 126404.84714 0 3871158 148333 None code31 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.. ( Outside) Sqm 387.73 387.73 230.711 False None None False None False 89453.57603 0 3871159 148333 None code32 Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per direc- tions of Engineer-in-charge. Sqm 393.29 393.29 18.7849 False None None False None False 7387.913321 0 3871160 148333 None code33 Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. ( length of mesh only be measured for payment.Plaster mesh 150mm wide Rmtr 42.21 42.21 4200.0 False None None False None False 177282.0 0 3871161 148333 None code34 Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge: 10mm to 15 mm wide and 8 mm deep groove. Rmtr 57.7 57.7 512.8 False None None False None False 29588.56 0 3871162 148333 None code35 Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 600x600 mm Sqm 1305.42 1305.42 343.61 False None None False None False 448555.3662 0 3871163 148333 None code36 Providing and laying Polished Glazed Vitrified tiles with thickness 10 mm in floor with different sizes with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).Size of Tile 600x600 mm Sqm 1473.18 1473.18 22.32 False None None False None False 32881.3776 0 3871164 148333 None code37 Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints fin- ished with cement mortar 1:3 over existing cement concrete bed , including cost of materials, mortar, labour, curing complete as per specifications. Sqm 5919.4 5919.4 19.4399 False None None False None False 115072.54406 0 3871165 148333 None code38 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 327.74 327.74 153.984 False None None False None False 50466.71616 0 3871166 148333 None code39 Providing and supplying crystalline integral concrete waterproofing admixture that waterproofs concrete by forming crystals deep in the pores, capillaries and microcracks of the concrete, self-seal waterproofing compound to bridge shrinkage cracks upto 0.5mm in width & resist hydro-static pressure upto 16bar for both positive & negative pressure confirming to DIN 1048 part 5 for 56% reduction in depth of penetration against control, resistance to chloride penetration confirming to ASTM C 1202 with 64% improvement against control & protecting steel re-inforcement against corrosion mixed @ 1% by weight of cementitious content in concrete. ie., integral crystaline waterproofing admix @ 0.5 kg/bag of cement. (For calculation purpose 320 kg of Cement for M-20 grade of Concrete is considered in the analysis) Sqm 683.26 683.26 46.59 False None None False None False 31833.0834 0 3871167 148333 None code40 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thick- ness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete. Sqm 987.67 987.67 29.5 False None None False None False 29136.265 0 3871168 148333 None code41 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. Sqm 1609.8 1609.8 131.664 False None None False None False 211952.7072 0 3871169 148333 None code42 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Kg 627.71 627.71 176.3999 False None None False None False 110727.981229 0 3871170 148333 None code43 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 141.09 141.09 1137.7574 False None None False None False 160526.191566 0 3871171 148333 None code44 Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 g/L and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 L/ 10 m². Over and including priming coat of exterior primer applied @ 0.90 L/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 173.31 173.31 230.711 False None None False None False 39984.52341 0 3871172 148333 None code45 Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 L/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 314.41 314.41 230.711 False None None False None False 72537.84551 0 3871173 148333 None code46 Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 55.55 55.55 30.8249 False None None False None False 1712.323195 0 3871174 148333 None code47 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 127.76 127.76 30.8249 False None None False None False 3938.189224 0 3871175 148333 None code48 Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 58.88 58.88 54.4319 False None None False None False 3204.950272 0 3871176 148333 None code49 Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below: 1. The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of 160/180 no. 2. Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs. 3. On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs.4. On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final melamine polish is applied with compressor pressure spray gun using melamine clear polish and melamine thinner mixed in required proportion complete as per direction of Engineer-in-Charge. (Final coat to be done in 1 or 2 layers without gap of time.) Sqm 752.14 752.14 54.431 False None None False None False 40939.73234 0 3871177 148333 None code50 Providing and supplying aluminium extruded tubular and other alu- minium sections as per the architectural drawings and approved draw- ings of Chief Architect, GoK.The aluminium quality shall be as per grade 6063 T5 or T6 as per BS 1474,including super durable powder coating of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge. ( The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid on this account).The weight of aluminium extruded section shall be taken for purpose of payment. Kg 452.17 452.17 607.152 False None None False None False 274535.91984 0 3871178 148333 None code51 Providing, assembling and supplying vision glass panels (IGUs) comprising of hermetically-sealed 6-12- 6 mm insulated glass (double glazed) vision panel units of size and shape as required and specified, comprising of an outer heat strengthened float glass 6mm thick, of approved colour and shade with reflective soft coating on surface 2 of approved colour and shade, an inner Heat strengthned clear float glass 6mm thick, spacer tube 12mm wide, dessicants, including primary seal and secondary seal (structural silicone sealant) etc. all complete for the required performances, as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineer-in-Charge. The IGUs shall be assembled in the factory/ workshop of the glass processor. (Payment for fixing of IGU Panels in the curtain glazing is included in cost of item No.18.2)For payment, only the actual area of glass on face 1 of the glass panels (excluding the areas of the grooves and weather silicone sealant) provided and fixed in position, shall be measured in m2.(i) Coloured tinted float glass 6mm thick substrate with reflective soft coating on face 2, + 12mm Airgap + 6mm Heat Strengthened clear Glass of approved make having properties as visible Light transmittance (VLT) of 25 to 35 %, Light reflection internal 10 to 15%, light reflection external 10 to 20 %, shading coefficient (0.25-0.28) and U value of 3.0 to 3.3 W/ m2 degree K etc. The properties of performance glass shall be decided by technical sanctioning authority as per the site requirement. Sqm 3380.77 3380.77 93.408 False None None False None False 315790.96416 0 3871179 148333 None code52 Extra for openable side / top hung vision glass panels (IGUs) including providing and supplying at site all accessories and hardwares for the openable panels as specified and of the approved make such as heavy duty stainless steel friction hinges, min 4 -point cremone locking sets with stainless steel plates, handles, buffers etc. including necessary stainless steel screws/ fasteners, nuts, bolts, washers etc. all complete as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineer- in-Charge. Sqm 4619.53 4619.53 93.408 False None None False None False 431501.05824 0 3871180 148333 None code53 Providing & fixing 10 mm thick plaster of Paris (gypsum anhydrous) ceiling up to a height of 5 m above floor level, over first class kail wood strips 25x6 mm with 10 mm gap in between and reinforced with rabbit wire mesh fixed to wooden frame. Flat surfaces Sqm 1415.41 1415.41 19.184 False None None False None False 27153.22544 0 3871181 148333 None code54 Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per m2 including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross “T” of size 24x28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between main’T’ at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross ‘T’ of length 600 mm and size 24 x28 mm made of 0.33 mm thick (Minimum) sheet to be inter locked at middle of the 1200x 600 mm panel to from grid of size 600x600 mm, resting on periphery walls /partitions on a Perimeter wall angle pre-coated steel of size(24x24X3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm interval and laying 15 mm thick densified edges calicum silicate ceiling tiles of approved texture in the grid, including, cutting/ making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required. Main ‘T’ runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm G.I. adjustable rods with galvanised steel level clips of size 85 x 30 x 0.8 mm, spaced at 1200 mm centre to centre along main ‘T’, bottom exposed with 24 mm of all T sections shall be pre-painted with polyster baked paint, for all heights, as per specifications, drawings and as directed by Engineer-in-Charge. Sqm 1880.92 1880.92 28.776 False None None False None False 54125.35392 0 3871182 148333 None code55 Providing and laying Gypsum panel partitions 100 mm thick with water proof Gypsum panels of size 666x500x100 mm, made of calcite phosphor Gypsum fixed with tongue and groove, jointed with bonding plaster as per manufacturer’s specifications in superstructure above plinth level up to floor I level. Gypsum blocks will have a minimum compressive strength of 9.3 kg/cm2 including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. Sqm 909.9 909.9 74.55 False None None False None False 67833.045 0
generalCriterionList	createdTs version createdDate modifiedDate criterionType description tenderEligibilityCriterionDocumentList 1724827885000 0 None None ELIGIBILITY Tenders from Joint ventures are not acceptable. None 1724827885000 0 None None ELIGIBILITY Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka None 1724827885000 1 None None ELIGIBILITY Tenders must be accompanied by earnest money deposit specified for the works shown in the table above. Earnest money deposit will have to be in any one of the forms specified in the Tender documents and shall have to be valid for 45 days beyond the validity of tender date None 1724827885000 0 None None ELIGIBILITY It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission. None 1724827885000 0 None None ELIGIBILITY EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection. None 1724828608000 0 None None ELIGIBILITY Tenders must be uploaded on or before 17.00 hours on the specified date. If the office happens to be closed on the date of receipt of the tenders as specified, the tenders will be received and opened on the next working day at the same time and place. None 1724828709000 0 None None ELIGIBILITY A Pre-tender meeting will be held on 21.08.2024 at 4.30 PM at the office of the Commissioner, Karnataka Slum Development Board, Bengaluru to clarify issues if any, and to answer queries on any matter that may be sought by post/ e-mail or raised at that stage as stated in Clause 8.2 of Instructions to Tenderers of the tender documents. None 1724828782000 0 None None ELIGIBILITY Eligibility Criteria and other details can be seen in the in tender documents None 1724828794000 0 None None ELIGIBILITY The terms & Conditions laid down in Karnataka Transparency in Public Procurements Act 1999 and Rules 2000 with subsequent amendments are applicable. None 1724828804000 0 None None ELIGIBILITY Conditional tenders will be rejected. None 1724828816000 0 None None ELIGIBILITY Deduction of Royalty and CESS as per the prevailing rates, time to time government rules/orders. None 1724828825000 0 None None ELIGIBILITY CGST & SGST will be paid as per the prevailing time to time govt rules None 1724828839000 0 None None ELIGIBILITY Further information can be had from the office of the Technical Director, Bangalore Circle, Karnataka Slum Development Board, Bengaluru (Phone No. 080-23460085, 23563504) and also can be seen in Website: www.ksdb.karnataka.gov.in None 1724831004000 0 None None ELIGIBILITY The Tenderer should visit the proposed construction site and submit the feasibility report regarding men, material & completion of works to the concerned Assistant Executive Engineer, Bangalore No.3 Sub-Division, Bangalore. None 1724831053000 0 None None ELIGIBILITY Successfully/substantially Satisfactorily completed as prime contractor, at least one single work such as similar residential building /building construction projects of value not less than 50% the value of work put to tender of respective workRs. 388.05 lakhs None 1724831064000 0 None None ELIGIBILITY The tenderer or his identified sub-contractor should possess required valid electrical license issued by KPWD/Government electrical Inspectorate for executing building electrification works and other infrastructure works like External Electrification, DG set/license by BWSSB/KUWS&DB for executing External water supply & Drainage works ,Sump Tank, Bore well Compound wall Demolision of old Building and rain water harvesting should have executed similar not less than 50 % of value of work put of respective work totalling to Rs.42.62 Lakhs in any one year None 1724831075000 0 None None ELIGIBILITY The Tenderer or his identified sub-contractor should possess valid license issued for executing Other allied works Like Fire Fighting works, Lift(13 Passenger cum bed lift-1No), UPS System, Telephone & Networking, CCTV System, AC works and Solar similar not less than 50 % of value of work put of respective work totalling to Rs.55.39 Lakhs in any one year None 1724831085000 0 None None ELIGIBILITY Liquid assets and/or availability of credit facilities of no less than 30% of the value of work put to tender of respective work(Credit lines/ letter of credit/ certificates from the Nationalized Banks for met-out the fund requirement Rs. 232.83 lakhs etc. (Standard format) None 1724831997000 0 None None ELIGIBILITY Executed in any one year, the following minimum quantities of work: Earth Work-3351.00cum,RCC and PCC Work-761.00cum, Reinforcement Steel(TMT)-125.60Ton, CC Block Masonry-1979.49Sqm, Plastering-84.00sqm, Flooring-661.44sqm, Painting-5146.00sqm None
preQualCriterionList	None
technicalCriterionList	createdTs version createdDate modifiedDate description criterionCategoryText criterionTypeOthersValue tenderTechnicalCriterionDocumentList None None None None Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs) None None None None None None Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction) None None None None None None Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year None None None None None None Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year None None None None None None Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx) None None None None None None Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period) None None None None None None Total value of civl engineering works executed and payments received in the last five years (year-wise) None None None None None None List of existing commitments and ongoing works None None None None None None List of works for which tenders already submitted None None None None None None Banker Details for reference None None None None None None Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded None None None None None None Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years None None None None None None Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded None None None None None None List of Financial Resources with Certificates None None None None None None Successfully/substantially Satisfactorily completed as prime contractor, at least one single work such as similar residential building /building construction projects of value not less than 50% the value of work put to tender of respective work Rs. 388.05 lakhs Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None Achieved in at least two financial years a minimum financial turnover (in all classes of civil engineering construction works only) Rs. 1552.20 lakhs shown in the table below against the work mentioned of IFT (In lakhs) (Usually not less than 2 times the estimated annual payments under this contract Past Experience None createdTs version createdDate modifiedDate documentName None None None None Audited CA Certificate of Annual Turnover None None None None The tenderer or his identified sub-contractor should possess required valid electrical license issued by KPWD/Government electrical Inspectorate for executing building electrification works and other infrastructure works like External Electrification, DG set/license by BWSSB/KUWS&DB for executing External water supply & Drainage works ,Sump Tank, Bore well Compound wall Demolision of old Building and rain water harvesting should have executed similar not less than 50 % of value of work put of respective work totalling to Rs.42.62 Lakhs in any one year. Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None The Tenderer or his identified sub-contractor should possess valid license issued for executing Other allied works Like Fire Fighting works, Lift(13 Passenger cum bed lift-1No), UPS System, Telephone & Networking, CCTV System, AC works and Solar similar not less than 50 % of value of work put of respective work totalling to Rs.55.39 Lakhs in any one year. Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None Executed in any one year, the following minimum quantities of work: Earth Work-3351.00cum,RCC and PCC Work-761.00cum, Reinforcement Steel(TMT)-125.60Ton, CC Block Masonry-1979.49Sqm, Plastering-84.00sqm, Flooring-661.44sqm, Painting-5146.00sqm Past Experience None createdTs version createdDate modifiedDate documentName None None None None Satisfactory Performance Certificate None None None None Availability by owning at least 50% of the required/specified key and critical equipments for this work-Transit weigh batch mixer (Ajax type)-1 Nos, Concrete mixer-1nos, Generatoe 25 KVA-1Nos, Tipper/Tractor/JCB-2nos, Vibrators-1nos Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- equipments None None None None Liquid assets and/or availability of credit facilities of no less than 30% of the value of work put to tender of respective work(Credit lines/ letter of credit/ certificates from the Nationalized Banks for met-out the fund requirement Rs. 232.83 lakhs etc. (Standard format) Others Line of credit createdTs version createdDate modifiedDate documentName None None None None Line of Credit None None None None The remaining can be deployed on lease/hire basis for all works provided, the relevant documents (commitment agreements etc) for availability for this work are furnished. Dumper Trucks/Tippers:2nos, Excavators:1No, Batching Plant of Minimum Capacity of 18 Cum/Hr:1No, Concrete Pump:1nos,JCB : 1 No Others Hire Equipments createdTs version createdDate modifiedDate documentName None None None None Others -- Hire Equipments None None None None as per tender document Others as per tender document createdTs version createdDate modifiedDate documentName None None None None Others -- as per tender document
tenderCriterionDocumentList	documentName optional documentTypeText Annual Turnover Certificate with UDIN Number certified by CA True Technical Bid Company Registration Certificate True Technical Bid Reserved Category Certificate False Technical Bid Small Scale Industries Certificate False Technical Bid work Done certificate True Technical Bid Quantities as per bid documents True Technical Bid Line of Credit True Technical Bid Equipments Own and Hire Documents True Technical Bid GST Registration certifiacte True Technical Bid PWDKPWD Class-1 Registration cerificate True Technical Bid Site Visit certificate from AEE, No.3 sud divison True Technical Bid
tenderWorkLocationList	tenderSubEstimateName districtName taluqName loksabhaContName assemblyContName locationDescription latitudeDegrees latitudeMinutes latitudeSeconds longitudeDegrees longitudeMinutes longitudeSeconds Buildings None None None None Queens Road - Bangalore None None None None None None Buildings None None None None Queens Road, Bangalore None None None None None None Buildings None None None None Queens Road, Bangalore None None None None None None
tenderAddress	createdTs 1724832077000 version 0 createdDate None modifiedDate None blockNumber Office of the Chief Engineer, Karnataka Slum Development Board, #55 1st Floor Abhaya Complex, Risaldar Street Sheshadripuram, Bengaluru-560020 street None city Bengaluru state Karnataka pin 560020
tenderRecallDTO	None