| 1725001191000 | 0 | None | None | Other Works | CONSTRUCTION OF CC ROAD AT WARD NO 04 SEEBINAKERE SALIM HOUSE TO ALTAF HOUSE AND HIMAST LIGHT AND LED LIGHTS FIXING IN TP THIRTHAHALLI LIMIT. | 423500.12 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3883823 | 149190 | None | code01 | Earth work in surface excavation by mechanical means for lowering & levelling the ground for all works other than foundation in all kinds of soils & up to depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces disposing off or levelling the excavated earth or sorting and stacking the selected earth for reuse in a radius of 50m and lift upto 1.5m inclouding cost of labour, tools, usage of machinery nd other appurtenances reuired to complete the work. [ PWD common SR 2023-24 Vol:1 P.NO.8 I.No. 1.13] | Cum | 405.44 | 405.44 | 18.6 | False | None | None | False | None | False | 7541.184 | 0 | | 3883824 | 149190 | None | code02 | Removal of Unserviceable Soil with Disposal up to asuitable distance as directed by the Engineer in charge of work [PWD common SR 2023-24 Vol:3 P.NO.17 I.No. 3.1] | Cum | 95.2 | 95.2 | 18.6 | False | None | None | False | None | False | 1770.72 | 0 | | 3883825 | 149190 | None | code03 | Compacting Original Ground Compacting original ground supporting embankment Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacted by rolling so as to achieve minimum dry density as given in Table 300-2 for embankment construction. [ PWD common SR 2023-24 Vol:3 P.NO.15 I.No. 3.7] | Cum | 117.6 | 117.6 | 18.6 | False | None | None | False | None | False | 2187.36 | 0 | | 3883826 | 149190 | None | code04 | Dry Lean Cement Concrete Sub- base Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1, cement content not to be less than 150 kg/ m3, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 t vibratory roller, finishing and curing.[ PWD commonSR 2023-24 Vol:3 P.NO.49 I.No.6.1] | Sqm | 5510.4 | 5510.4 | 18.6 | False | None | None | False | None | False | 102493.44 | 0 | | 3883827 | 149190 | None | code05 | PQC Providing and constructing un-reinforced plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M20 (Grade), coarse and fine aggregates conforming to IS:383:2016, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including construction joints, , primer, sealant , curing of concrete slabs for 14-days, and water finishing to lines and grade as per drawing and technical specification clause 1501 with all lead, lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments etc., complete. as per the directions of the Engineer-in-charge of the work [PWD common SR 2023-24 Vol:3 P.NO.188 I.No. 16.27] | Sqm | 7138.88 | 7138.88 | 18.6 | False | None | None | False | None | False | 132783.168 | 0 | | 3883828 | 149190 | None | code06 | Construction of Sub grade and Earthen Shoulders Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement oftable No. 300-2 [ PWD commonSR 2023-24 Vol:3 P.NO.17 I.No. 3.6] | Cum | 552.16 | 552.16 | 4.19 | False | None | None | False | None | False | 2313.5504 | 0 | | 3883829 | 149190 | None | code07 | Earth work excavation by manual means for drains,canals, waste weir draft, approach channels, key trench, foundation of Bridges and such similar works, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, excavated surface leveled and sides neatly dressed disposing off or leveling the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage & other appurtenances required to complete the work.In ordinary/soft rock without blasting upto 1.5 m depth., (PWD SR 2023-24, Volume -1 , P.No. 5/ I.No. 1.4.1) | Cum | 271.04 | 271.04 | 14.74 | False | None | None | False | None | False | 3995.1296 | 0 | | 3883830 | 149190 | None | code08 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately)Mix 1:3:6 (M10) Using 40 mm and down size graded crushed coarse aggregates [PWD SR 2023-24 / Page No.15/Sl. No. 2.1.3 Volume I ] | Cum | 6707.68 | 6707.68 | 0.06 | False | None | None | False | None | False | 402.4608 | 0 | | 3883831 | 149190 | None | code09 | Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately)M30 Design Mix Using 20 mm and down size graded crushed coarse aggregates [PWD SR 2021-22/ Page No.15/Sl. No. 2.2.3 Volume I ] | Cum | 7603.2 | 7603.2 | 0.29 | False | None | None | False | None | False | 2204.928 | 0 | | 3883832 | 149190 | None | code10 | Providing Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work including straightening, cut- ting, bending, placing in position, binding and anchoring to adjacent members whereever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. (The laps and wastages shall not be measured separately)[PWD SR 2023-24/ Page No.84/Sl. No. 11.32 Volume II ] | Kg | 118.72 | 118.72 | 65.0 | False | None | None | False | None | False | 7716.8 | 0 | | 3883833 | 149190 | None | code11 | Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ram- ming after watering with a lead upto 50 m , and lift upto 1.5 m. Including cost of all labour complete as per specifications..[PWD SR 2024-25/ Page No.07/ sSl No 1.10/ Volume I ] . | Cum | 179.2 | 179.2 | 0.72 | False | None | None | False | None | False | 129.024 | 0 | | 3883834 | 149190 | None | code12 | Fabricating, supplying and erection of ... ms long hot dip Galvanized Octagonal hot dip Pole with BSEN 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangements, including suitable boards, Bakelite sheet and MCBs as per IS specifications suitable to withstand the wind speed of 47 m/s for m Pole in single section and single joint welded as per IS 9595/IS10178AWS having dimensions bottom ..... mm , top. mm with 3 mm thick, suitable base plate and 4Nos of long J bolts along with template and the Pole shall be hot dip galvanized in single dipping with not less than 65micron as per ASTM-A123 and 153 etc., (excluding foundation) as per drawing appended. 10 m - Top 70 mm and Bottom 175 mm dia.(PWD Ele SR 2022-23 P No-11 I No-4.2.8) | Each | 24080.0 | 24080.0 | 1.0 | False | None | None | False | None | False | 24080.0 | 0 | | 3883835 | 149190 | None | code13 | Supply of LED floodlight luminaire with pressure die cast aluminum housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate/clear glass material, delivering superior light output Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70 percentage, CCT greater than 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminaire greater than IK08. Power Factor greater than 0.9 with mains, Surge Protection Min 5KV along with Over voltage or Overload,short circuit or miss wiring protection. Compatible for pole mauling with outer dia of 40mm to 50mm.Universal Voltage driver to operate wide voltage range from 100 V to 270V 50 or 60Hz application. Compliance to IS 10322 or IEC 60598, LM 79 and LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with W System Power consumption. LED Efficiency greater than 1301m per w, nominal CRI greater than 75. Luminaire manufacturer should have in- house facility accredited by NABL or CPRI and any Government certified agency and Design & Development facility certified by ISO 9001:2008. Housing with supplier word mark or name shall be Engraved or Embossing on the die cast housing or Body part Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer and Cree or Nichia or Lumileds or Osram make LED Source.ED Floodlight 180W (PWD Ele SR 2022-23 P No-46 I No-11.9.6) | Each | 21422.24 | 21422.24 | 4.0 | False | None | None | False | None | False | 85688.96 | 0 | | 3883836 | 149190 | None | code14 | Fixing halogen/metal halide /SVL/IL/LED floodlight fitting over existing pole / wall ceiling including clA, bolts, nuts and wiring using suitable capacity wires.(PWD Ele SR 2022-23, P-56 I No-13.5) | Each | 181.44 | 181.44 | 4.0 | False | None | None | False | None | False | 725.76 | 0 | | 3883837 | 149190 | None | code15 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments.. 1.5 mm2 ( PWD Ele SR 2022-23, P-5 I No-2.3.2) | m | 29.12 | 29.12 | 4.0 | False | None | None | False | None | False | 116.48 | 0 | | 3883838 | 149190 | None | code16 | 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part- 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975.(Mescom SR 2021-22 P No-9 I No-32.05 Part -III) 16 Sqmm, 4 Core, (11 GI Strips - 4 x 0.8 mm) Hescom'"s CSR -2023-24 | Km | 158863.04 | 158863.04 | 0.05 | False | None | None | False | None | False | 7943.152 | 0 | | 3883839 | 149190 | None | code17 | Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff,Hescom'"s CSR -2023-24 | Km | 23392.32 | 23392.32 | 0.04 | False | None | None | False | None | False | 935.6928 | 0 | | 3883840 | 149190 | None | code18 | HDPE pipe grade PE100-PN 3.0, 63mm (KUWS & DB CSR - 2023-24) | m | 62.72 | 62.72 | 80.0 | False | None | None | False | None | False | 5017.6 | 0 | | 3883841 | 149190 | None | code19 | Supplying heavy gauge PVC conduit pipe …….dia .......mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using inverted wood plugs in case of RCC ceiling and RCC wall / stone structure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws. (PWD Ele SR 2023-24 P No-02, I No-1.3.3)32 mm dia 2.5 mm thick | m | 107.52 | 107.52 | 5.0 | False | None | None | False | None | False | 537.6 | 0 | | 3883842 | 149190 | None | code20 | Supplying and drawing 3 core flat PVC sheathed submersible pump cable manufactured with electrolytic grade copper with flexible copper with low resistance conductor confirming to13:8130-1984 and virgin grade PVC insulation and powder coating extruded PVC sheathed suitable for working voltage upto 1100 Volts as per IS-694:1990.3C x 2.5 mm2 (PWD Ele SR 2021-22 P No-07, I No-2.6.1) | m | 131.04 | 131.04 | 15.0 | False | None | None | False | None | False | 1965.6 | 0 | | 3883843 | 149190 | None | code21 | Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 20A single phase Class-1 Accuracy with Temper Proof Energy Meter. (PWD Ele SR 2023-24 P No-19, I No-5.30) | Each | 1545.6 | 1545.6 | 1.0 | False | None | None | False | None | False | 1545.6 | 0 | | 3883844 | 149190 | None | code22 | Supply and Installation / Fixing / Provision of Outdoor type Thermoplastic Modular Panel enclosure with transparent Polycarbonate Lid, shock proof, IP65 (Weather Proof), rust proof, dust proof, water proof, corrosion proof having internally Embedded gasket on both lid and flap suitable to fix Single Phase / Three Phase Energy Meter in suitable base plate and having a provision for Fuse / MCB cut-out with suitable transparent hinged flap opening for operating MCB along with complete tamper proof SEALING facility.300 mm x 600 mm x 170 mm (PWD Ele SR 2021-22 P No-21, I No-5.44.3) | Each | 7691.04 | 7691.04 | 1.0 | False | None | None | False | None | False | 7691.04 | 0 | | 3883845 | 149190 | None | code23 | Supplying and fixing Microprocessor Based Astronomical timer Switch with using necessary bolts, nuts and washers etc.(PWD Ele SR 2023-24 P No-21, I No-5.48) | Each | 5424.16 | 5424.16 | 1.0 | False | None | None | False | None | False | 5424.16 | 0 | | 3883846 | 149190 | None | code24 | Supply and fixing of 4pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947. 25 Amps (PWD Ele SR 2023-24 P No-16, I No-5.13.1) | Each | 5424.16 | 5424.16 | 1.0 | False | None | None | False | None | False | 5424.16 | 0 | | 3883847 | 149190 | None | code25 | Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required.confirming to IEC-60898. a) 6-32Amps SP (PWD Ele SR 2021-22 P No-17, I No-5.17.1) | Each | 464.8 | 464.8 | 1.0 | False | None | None | False | None | False | 464.8 | 0 | | 3883848 | 149190 | None | code26 | Supplying and fixing porcelain fuse channel with cutout on existing panel board using necessary nuts, bolts, washers etc., complete. 32Amps (PWD Ele SR 2023-24 P No-14, I No-5.7.2) | Each | 269.92 | 269.92 | 2.0 | False | None | None | False | None | False | 539.84 | 0 | | 3883849 | 149190 | None | code27 | GI Grounding pipe, B - Class, 42 mm dia, 2.5 Mtr long,3.2 mm thick with bolt, nut, GI Strips and washer complete Minimum Weight of GI Pipe: 7.3 Kg (Mescom SR 2021-22 P No-17, I No-54.01 Part -III)., Hescom"s CSR-2023-24 | Each | 832.16 | 832.16 | 1.0 | False | None | None | False | None | False | 832.16 | 0 | | 3883850 | 149190 | None | code28 | Good Quality well burnt Charcoal for grounding purposes packed in non returnable gunny bag of 30 Kg each.(Mescom SR 2021-22 P No-17, I No-54.02 Part -III)
Hescom"s CSR-2023-24 | Each | 757.12 | 757.12 | 1.0 | False | None | None | False | None | False | 757.12 | 0 | | 3883851 | 149190 | None | code29 | Good Quality Salt for grounding purposes packed in 50 Kg gunny bag. Hescom"s CSR-2023-24 | Bag | 347.2 | 347.2 | 1.0 | False | None | None | False | None | False | 347.2 | 0 | | 3883852 | 149190 | None | code30 | GI Pipe B - Class as per IS-1239. GI Pipe - 50 mm Dia (Mescom SR 2021-22 P No-16 I No-49.05 Part -III) | m | 347.2 | 347.2 | 15.0 | False | None | None | False | None | False | 5208.0 | 0 | | 3883853 | 149190 | None | code31 | Supplying, and fixing of Hot dip Galvanized M.S.Bracket suitable for out door luminaries and mounted on Octagonal pole using necessary bolts, nuts etc., complete.Double Arm Bracket with 1000 mm Standard 40/50 mm dia (PWD Ele SR 2021-22 P No-9, I No-4.7.4) | Each | 3024.0 | 3024.0 | 1.0 | False | None | None | False | None | False | 3024.0 | 0 | | 3883854 | 149190 | None | code32 | Supplying and fixing angle iron frame work fabricated out of M.S.angle iron.. and M.S. Flat......with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint.50 x 100 x 50 x 6 mm C channel (PWD Ele SR 2023-24 P No-20, I No-4.41.4) | m | 846.72 | 846.72 | 2.0 | False | None | None | False | None | False | 1693.44 | 0 |
|