createdTs	None
version	None
createdDate	None
modifiedDate	None
noticeInvitingTenderDTO	createdTs 1725626105636 version 5 createdDate None modifiedDate None tenderType RFQ evaluationType TWO_COVER evaluationTypeText Two Cover invitingStrategy OPEN invitingStrategyText Open taxType INCLUSIVE_TAX tenderFee 2160.00 emd 146000.00 bidValueType ITEM_WISE bidValueTypeText Item wise tenderReceiptClose 21-09-2024 17:00:00 tenderQueryClose 17-09-2024 11:30:00 technicalBidOpen 23-09-2024 17:30:00 publishedDate 09-09-2024 17:27:45 publishedByPost DUDC_EE_UK publishedByUser KPE12421 - K M RAVIKUMAR bidValidityPeriod 90 noOfCalls 1 preBidMeetingDate 17-09-2024 11:30:00 preBidMeetingYn True preQualificationBidOpen None denominationType RUPEES denominationTypeText Rupees retenderedYn None percentageRateTypeText None contactPerson Bhaskar Gowda splitEmdRequiredYn False emdBankGuarantee None emdCash None bgValidityPeriod None hideWeightage None multipleCurrencySelectionAllowedYn False isTechWeightageAllowed False highestBidderSelection False isVariableEmdAllowed None qcbsTenderYn None itemwiseEmdRequiredYn None sampleSubmissionDate None officeNumber None mobileNumber 9448629028 tenderSupplierList None
tenderSchedule	createdTs 1725626105687 version 6 createdDate None modifiedDate None tenderNumber DMA/2024-25/OW/WORK_INDENT18913 title Improvement of Buildings and other works for TMC Bhatkal Limits description Additional works of Purakarmika Griha Bhagya Yojana. Additional work under Purakarmika Griha Bhagya Yojana.Construction of shade in front of Kokti Mahasati temple.Installation of sheets at the top of Vikala Chetana School.Replacement of main pipeline from Kadvinakatta Pump House and construction of Hanuman Nagar Bore Well. and drinking water system.Installation of light to Bunder road divider. category WORKS categoryText Works ecv 8621000.00 deptName Directorate of Municipal Administration status PUBLISHED statusText Published remarks None csrValue None ecvtenderYn True location 2205 locationName DMA District Urban Development Cell Uttara Kannada provisionalAmount 8621000.0 groupOverheadTotal 1320443.72 fileNumber naa1e86ist2022
tenderSubEstimateList	createdTs version createdDate modifiedDate workCategoryName subEstimateName estimateTotal itemList 1725626106000 0 None None Other Works Additional works of Purakarmika Griha Bhagya Yojana. 3469834.72 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3937282 152184 None PWD SR.2023.24.Vol.2.Page No.17.Item No.6.32 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. Sqm 1467.2 1467.2 235.329 False None None False None False 345274.7088 0 3937283 152184 None PWD SR.2023.24.Vol.2.Page No.17.Item No.6.32 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. Sqm 1481.87 1481.87 32.269 False None None False None False 47818.46303 0 3937284 152184 None PWD SR.2023.24.Vol.2.Page No.17.Item No.6.33 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. Sqm 1392.5 1392.5 64.75 False None None False None False 90164.375 0 3937285 152184 None PWD SR.2023.24.Vol.2.Page No.17.Item No.6.33 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. Sqm 1406.29 1406.29 84.389 False None None False None False 118675.40681 0 3937286 152184 None PWD SR.2023.24.Vol.2.Page No.17.Item No.6.34 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. Sqm 1236.48 1236.48 5.76 False None None False None False 7122.1248 0 3937287 152184 None PWD SR.2023.24.Vol.2.Page No.42.Item No.8.8 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 415.52 415.52 182.24 False None None False None False 75724.3648 0 3937288 152184 None PWD SR.2023.24.Vol.2.Page No.42.Item No.8.8 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 419.67 419.67 345.28 False None None False None False 144903.6576 0 3937289 152184 None PWD SR.2023.24.Vol.2.Page No.41.Item No.8.2.1 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 330.4 330.4 572.23 False None None False None False 189064.792 0 3937290 152184 None PWD SR.2023.24.Vol.2.Page No.41.Item No.8.2.1 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 333.7 333.7 572.23 False None None False None False 190953.151 0 3937291 152184 None PWD SR.2023.24.Vol.2.Page No.71.Item No.10.14 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per m2, including pointing in white cement mixed with pigment of matching shade complete Sqm 1238.72 1238.72 46.99 False None None False None False 58207.4528 0 3937292 152184 None PWD SR.2023.24.Vol.2.Page No.71.Item No.10.14 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per m2, including pointing in white cement mixed with pigment of matching shade complete Sqm 1251.1 1251.1 46.99 False None None False None False 58789.189 0 3937293 152184 None PWD SR.2023.24.Vol.2.Page No.59.Item No.9.7.1 Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding for Bathrooms: Toilet: Chemically exposed areas and joints filled with acid and/or alkali resisting cement as per IS : 4457, complete as per the direction of Engineer-in- Charge. In flooring on a bed of 10 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand) with Acid and alkali resistant tile Sqm 1395.52 1395.52 13.33 False None None False None False 18602.2816 0 3937294 152184 None PWD SR.2023.24.Vol.2.Page No.59.Item No.9.7.1 Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding for Bathrooms: Toilet: Chemically exposed areas and joints filled with acid and/or alkali resisting cement as per IS : 4457, complete as per the direction of Engineer-in- Charge. In flooring on a bed of 10 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand) with Acid and alkali resistant tile Sqm 1409.47 1409.47 13.33 False None None False None False 18788.2351 0 3937295 152184 None PWD SR.2023.24.Vol.2.Page No.46.Item No.8.30 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge Sqm 194.88 194.88 182.24 False None None False None False 35514.9312 0 3937296 152184 None PWD SR.2023.24.Vol.2.Page No.46.Item No.8.30 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge Sqm 196.82 196.82 345.28 False None None False None False 67958.0096 0 3937297 152184 None PWD SR.2023.24.Vol.2.Page No.50.Item No.8.54.2 Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 g/L of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats as per specifications and as per directions of Engineer in charge. Sqm 123.2 123.2 572.23 False None None False None False 70498.736 0 3937298 152184 None PWD SR.2023.24.Vol.2.Page No.50.Item No.8.54.2 Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 g/L of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats as per specifications and as per directions of Engineer in charge. Sqm 124.43 124.43 572.23 False None None False None False 71202.5789 0 3937299 152184 None PWD SR.2023.24.Vol.2.Page No.86.Item No.11.34A Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding Kg 188.16 188.16 301.32 False None None False None False 56696.3712 0 3937300 152184 None PWD SR.2023.24.Vol.2.Page No.85.Item No.11.34A Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding Kg 190.04 190.04 301.32 False None None False None False 57262.8528 0 3937301 152184 None PWD SR.2023.24.Vol.2.Page No.99.Item No.12.12 Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps ), but including cost of materials, labour, usage charges complete as per specifications. Cum 139106.24 139106.24 0.28 False None None False None False 38949.7472 0 3937302 152184 None PWD SR.2023.24.Vol.2.Page No.99.Item No.12.12 Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps ), but including cost of materials, labour, usage charges complete as per specifications. Cum 140497.3 140497.3 0.28 False None None False None False 39339.244 0 3937303 152184 None PWD SR.2023.24.Vol.2.Page No.99.Item No.12.15 Providing and fixing in position fully panelled Honne wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. ( excluding cost of fixtures ) Sqm 8337.28 8337.28 7.56 False None None False None False 63029.8368 0 3937304 152184 None PWD SR.2023.24.Vol.2.Page No.99.Item No.12.15 Providing and fixing in position fully panelled Honne wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. ( excluding cost of fixtures ) Sqm 8420.65 8420.65 7.56 False None None False None False 63660.114 0 3937305 152184 None PWD SR.2023.24.Vol.2.Page No.104.Item No.12.55.1 Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, lovered with heat moulded Prelaminated PVC C Channel of 5mm thick sheet & 30x50mm wide to form stiles & 5mm thick & 75mm wide Prelaminated PVC Sheets for top rail, lock rail & bottomrail on either side & 5mm thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet Prelaminated on either side fitted in the M.S. frame, Sealed to the stiles & rails with PVC Designer beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75mm Aluminium hinges. Sqm 2649.92 2649.92 6.3 False None None False None False 16694.496 0 3937306 152184 None PWD SR.2023.24.Vol.2.Page No.104.Item No.12.55.1 Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, lovered with heat moulded Prelaminated PVC C Channel of 5mm thick sheet & 30x50mm wide to form stiles & 5mm thick & 75mm wide Prelaminated PVC Sheets for top rail, lock rail & bottomrail on either side & 5mm thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet Prelaminated on either side fitted in the M.S. frame, Sealed to the stiles & rails with PVC Designer beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75mm Aluminium hinges. Sqm 2676.41 2676.41 6.3 False None None False None False 16861.383 0 3937307 152184 None PWD SR.2023.24.Vol.2.Page No.111.Item No.12.54 Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long brackets of 15x15mm M.S Square tube, the entire door frame to be reinforced with 19x19mm M.S Square tube of 19 gauge. The door frame to be fixed to the wall using M.S. Screws of 65/80mm size complete as per manufacturers specification & direction of Engineer-in-charge. Mtr 356.16 356.16 36.0 False None None False None False 12821.76 0 3937308 152184 None PWD SR.2023.24.Vol.2.Page No.111.Item No.12.54 Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long brackets of 15x15mm M.S Square tube, the entire door frame to be reinforced with 19x19mm M.S Square tube of 19 gauge. The door frame to be fixed to the wall using M.S. Screws of 65/80mm size complete as per manufacturers specification & direction of Engineer-in-charge. Mtr 359.72 359.72 36.0 False None None False None False 12949.92 0 3937309 152184 None PWD SR.2023.24.Vol.2.Page No.101.Item No.12.55.1 Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Prelaminated PVC C Channel of 5mm thick sheet & 30x50mm wide to form stiles & 5mm thick & 75mm wide Prelaminated PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet Prelaminated on either side fitted in the M.S. frame, Sealed to the stiles & rails with PVC Designer beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75mm Aluminium hinges. -do- with both side prelam Mtr 2649.92 2649.92 36.0 False None None False None False 95397.12 0 3937310 152184 None PWD SR.2023.24.Vol.2.Page No.101.Item No.12.55.1 Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Prelaminated PVC C Channel of 5mm thick sheet & 30x50mm wide to form stiles & 5mm thick & 75mm wide Prelaminated PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet Prelaminated on either side fitted in the M.S. frame, Sealed to the stiles & rails with PVC Designer beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 No of 75mm Aluminium hinges. -do- with both side prelam Mtr 2676.41 2676.41 36.0 False None None False None False 96350.76 0 3937311 152184 None PWD SR.2023.24.Vol.2.Page No.104.Item No.12.51 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. No 1137.92 1137.92 6.0 False None None False None False 6827.52 0 3937312 152184 None PWD SR.2023.24.Vol.2.Page No.104.Item No.12.51 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. No 1149.29 1149.29 6.0 False None None False None False 6895.74 0 3937313 152184 None PWD SR.2023.24.Vol.2.Page No.105.Item No.12.58 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete No 134.4 134.4 6.0 False None None False None False 806.4 0 3937314 152184 None PWD SR.2023.24.Vol.2.Page No.105.Item No.12.60 Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. complete. No 1178.24 1178.24 3.0 False None None False None False 3534.72 0 3937315 152184 None PWD SR.2023.24.Vol.2.Page No.105.Item No.12.62 Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete No 265.44 265.44 12.0 False None None False None False 3185.28 0 3937316 152184 None PWD SR.2023.24.Vol.2.Page No.105.Item No.12.63 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete No 145.6 145.6 6.0 False None None False None False 873.6 0 3937317 152184 None PWD SR.2023.24.Vol.2.Page No.105.Item No.12.69.2 Providing and fixing ISI marked oxidised M.S. single acting spring hinges with necessary screws etc., 125mm No 272.16 272.16 9.0 False None None False None False 2449.44 0 3937318 152184 None PWD SR.2023.24.Vol.2.Page No.105.Item No.12.69.3 Providing and fixing ISI marked oxidised M.S. single acting spring hinges with necessary screws etc., 100mm No 241.92 241.92 9.0 False None None False None False 2177.28 0 3937319 152184 None PWD SR.2023.24.Vol.2.Page No.105.Item No.12.58 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete No 135.74 135.74 6.0 False None None False None False 814.44 0 3937320 152184 None PWD SR.2023.24.Vol.2.Page No.105.Item No.12.60 Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. complete. No 1190.02 1190.02 3.0 False None None False None False 3570.06 0 3937321 152184 None PWD SR.2023.24.Vol.2.Page No.105.Item No.12.62 Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete No 268.09 268.09 12.0 False None None False None False 3217.08 0 3937322 152184 None PWD SR.2023.24.Vol.2.Page No.105.Item No.12.63 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete No 147.05 147.05 6.0 False None None False None False 882.3 0 3937323 152184 None PWD SR.2023.24.Vol.2.Page No.105.Item No.12.69.2 Providing and fixing ISI marked oxidised M.S. single acting spring hinges with necessary screws etc., 125mm No 274.88 274.88 9.0 False None None False None False 2473.92 0 3937324 152184 None PWD SR.2023.24.Vol.2.Page No.105.Item No.12.69.3 Providing and fixing ISI marked oxidised M.S. single acting spring hinges with necessary screws etc., 100mm No 244.33 244.33 9.0 False None None False None False 2198.97 0 3937325 152184 None PWD SR.2023.24.Vol.2.Page No.84.Item No.11.26.1 Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. M.S. tube including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Kg 154.56 154.56 108.145 False None None False None False 16714.8912 0 3937326 152184 None PWD SR.2023.24.Vol.2.Page No.77.Item No.11.2 Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in- Charge. Kg 126.56 126.56 17.1 False None None False None False 2164.176 0 3937327 152184 None PWD SR.2023.24.Vol.2.Page No.21.Item No.7.7 Providing & fixing reinforced by organic fibres and/or inorganic syntheticfibres cement 6 mm thick corrugated sheets (as per IS: 14871) roofing up to any pitch and fixing with polymer coated J, or L hooks, bolts and nuts 8 mm dia. G.I. plain and bitumen washers or with self drilling fastener and EPDM washers etc. complete (excluding the cost of purlins, rafters and trusses), including cutting sheets to size and shape wherever required as per design drawings. Sqm 485.28 485.28 13.049 False None None False None False 6332.41872 0 3937328 152184 None PWD SR.2023.24.Vol.2.Page No.77.Item No.11.5.2 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using flats 30x6mm for diagonal braces and central cross piece including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Sqm 4798.55 4798.55 1.89 False None None False None False 9069.2595 0 3937329 152184 None PWD SR.2023.24.Vol.2.Page No.109.Item No.12.85 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) Sqm 6405.28 6405.28 1.62 False None None False None False 10376.5536 0 3937330 152184 None PWD SR.2023.24.Vol.2.Page No.109.Item No.12.85 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) Sqm 6469.33 6469.33 1.62 False None None False None False 10480.3146 0 3937331 152184 None PWD SR.2023.24.Vol.2.Page 62.Item No.9.21.2 Providing and laying Vitrified tiles with thickness 9-10 mm in floor with different sizes with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). Size of Tile 600x600 mm Sqm 1386.56 1386.56 121.48 False None None False None False 168439.3088 0 3937332 152184 None PWD SR.2023.24.Vol.2.Page 62.Item No.9.21.2 Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). Size of Tile 600x600 mm Sqm 1400.42 1400.42 121.48 False None None False None False 170123.0216 0 3937333 152184 None PWD SR.2023.24.Vol.2.Page 149.Item No.15.1 Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6kg per m2 to achieve final DFT (dry film thickness) of 1mm including prime coat of epoxy primer @150 g per m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification & with a 10 years warranty on product & work from certified manufacturers as per the direction of the Engineer In charge. Sqm 924.19 924.19 169.96 False None None False None False 157075.3324 0 3937334 152184 None S.R.Electrical 2023.24 Chapter.1, Item No.1.1.1 Concealed Conduit System Supplying Heavy Gauge PVC Conduit pipe 19/20 mm dia 2mm thick confirming to IS 2509 with suitable size bends,metal/PVC junction boxes adhesive paste etc.and running before concreting the slab.The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipes ends should be covered using PVC end enclosures.run with 18SWG GI fish wire wherever necessary.19/20 mm dia 2 mm thick Mtr 69.0 69.0 117.0 False None None False None False 8073.0 0 3937335 152184 None S.R.Electrical 2023.24 Chapter.1.Item No.1.2.2 Concealed Conduit System Supplying Heavy Gauge PVC Conduit pipe 25 mm dia 2mm thick confirming to IS 2509 with suitable size bends,metal/PVC junction boxes adhesive paste etc,and running before concreting the slab.The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipes ends should be covered using PVC end enclosures.run with 18SWG GI fish wire wherever necessary.25 mm dia 2 mm thick Mtr 78.0 78.0 39.0 False None None False None False 3042.0 0 3937336 152184 None S.R.Electrical 2023.24 Chapter.1, Item No.1.3.1 Concealed conduit System,Supplying Heavy Gauge PVC Conduit Pipe 19/20mm dia 2mm thick with suitable size bends,metal/PVE junction boxes adhesive paste etc.,by groove cutting in the wall & fixing by using U or J hooks and cement plastering up to the wall surface and run with 18 SWG GI fish wire run through out the conduit wherever necessary.19/20 mm dia 2 mm thick Mtr 68.0 68.0 78.0 False None None False None False 5304.0 0 3937337 152184 None S.R.Electrical 2023.24 Chapter.1, Item No.1.3.2 Concealed conduit System,Supplying Heavy Gauge PVC Conduit Pipe 25mm dia 2mm thick with suitable size bends,metal/PVE junction boxes adhesive paste etc.,by groove cutting in the wall & fixing by using U or J hooks and cement plastering up to the wall surface and run with 18 SWG GI fish wire run through out the conduit wherever necessary.25 mm dia 2 mm thick Mtr 79.0 79.0 78.0 False None None False None False 6162.0 0 3937338 152184 None S.R.Electrical 2023.24 Chapter.1, Item No.1.1.3 Concealed conduit System,Supplying Heavy Gauge PVC Conduit Pipe 32mm dia 2.5 mm thick with Confirming to IS 2509 with suitable size bends,metal/PVC junction boxes adhesive paste etc.,and running before concreting the slab.The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosure.Run with 18SWG GI fish wire wherever necessary.32 mm dia 2.5 mm thick Mtr 106.0 106.0 78.0 False None None False None False 8268.0 0 3937339 152184 None S.R.Electrical 2023.24 Chapter.3, Item No.3.3.1 Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall,including necessary rawl plugs,Machine/NF screws etc.,complete. Each 103.0 103.0 48.0 False None None False None False 4944.0 0 3937340 152184 None S.R.Electrical 2023.24 Chapter.3, Item No.3.3.2 Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall,including necessary rawl plugs,Machine/NF screws etc.,complete. Each 124.0 124.0 18.0 False None None False None False 2232.0 0 3937341 152184 None S.R.Electrical 2023.24 Chapter.3, Item No.3.3.4 Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall,including necessary rawl plugs,Machine/NF screws etc.,complete. Each 173.0 173.0 12.0 False None None False None False 2076.0 0 3937342 152184 None S.R.Electrical 2023.24 Chapter.3, Item No.3.5.1 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. Each 137.0 137.0 96.0 False None None False None False 13152.0 0 3937343 152184 None S.R.Electrical 2023.24 Chapter.3, Item No.3.5.2 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. Each 161.0 161.0 54.0 False None None False None False 8694.0 0 3937344 152184 None S.R.Electrical 2023.24 Chapter.3, Item No.3.5.4 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. Each 234.0 234.0 48.0 False None None False None False 11232.0 0 3937345 152184 None S.R.Electrical 2023.24 Chapter.3, Item No.3.6.1 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Each 102.0 102.0 60.0 False None None False None False 6120.0 0 3937346 152184 None S.R.Electrical 2023.24 Chapter.3, Item No.3.6.2 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Each 166.0 166.0 24.0 False None None False None False 3984.0 0 3937347 152184 None S.R.Electrical 2023.24 Chapter.3, Item No.3.6.3 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Each 171.0 171.0 48.0 False None None False None False 8208.0 0 3937348 152184 None S.R.Electrical 2023.24 Chapter.3, Item No.3.6.10 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Each 236.0 236.0 12.0 False None None False None False 2832.0 0 3937349 152184 None S.R.Electrical 2023.24 Chapter.3, Item No.3.6.11 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Each 156.0 156.0 24.0 False None None False None False 3744.0 0 3937350 152184 None S.R.Electrical 2023.24 Chapter.2, Item No.2.1.1 Point Wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC conduit /casing capping using 1100V grade, COPPER conductor flexible multi strand FRLS PVC insulated to 2X1.5 Sqmm cabale confirming to the GTP with a 6 Amps flush type SP control switch shall be fixed on the existing plastic sheet/gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Nos 285.0 285.0 12.0 False None None False None False 3420.0 0 3937351 152184 None S.R.Electrical 2023.24 Chapter.2, Item No.2.1.2 Point Wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC conduit /casing capping using 1100V grade, COPPER conductor flexible multi strand FRLS PVC insulated to 2X1.5 Sqmm cabale confirming to the GTP with a 6 Amps flush type SP control switch shall be fixed on the existing plastic sheet/gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Nos 394.0 394.0 6.0 False None None False None False 2364.0 0 3937352 152184 None S.R.Electrical 2023.24 Chapter.3, Item No.3.1.2 Supplying 6A flush type socket and 6Amps flush type SP switch either surface / flush mounting in existing gang box or in a 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring using necessary capacity wires as required. as per IS 1293 and IS 3654 Each 147.0 147.0 24.0 False None None False None False 3528.0 0 3937353 152184 None S.R.Electrical 2023.24 Chapter.2, Item No.2.3.1 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100v grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694:1990 & confirming to the attached GTP Mtr 19.0 19.0 234.0 False None None False None False 4446.0 0 3937354 152184 None S.R.Electrical 2023.24 Chapter.2, Item No.2.3.2 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100v grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694:1990 & confirming to the attached GTP Mtr 26.0 26.0 117.0 False None None False None False 3042.0 0 3937355 152184 None S.R.Electrical 2023.24 Chapter.2, Item No.2.3.3 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100v grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694:1990 & confirming to the attached GTP Mtr 42.0 42.0 110.0 False None None False None False 4620.0 0 3937356 152184 None S.R.Electrical 2023.24 Chapter.2, Item No.2.3.4 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100v grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694:1990 & confirming to the attached GTP Mtr 63.0 63.0 80.0 False None None False None False 5040.0 0 3937357 152184 None S.R.Electrical 2023.24 Chapter.11, Item No.11.3.2 Supplying of .4'.feet -PVC Batten with integrated LED tube 20/22 W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRIgreather than 80. Power Input: 220-240V@ 50/60Hz & Power factorgreather than 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. Each 690.0 690.0 12.0 False None None False None False 8280.0 0 3937358 152184 None S.R.Electrical 2023.24 Chapter.13, Item No.13.7.1 Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, required Nos of round blocks and clA. Each 122.0 122.0 12.0 False None None False None False 1464.0 0 3937359 152184 None S.R.Electrical 2023.24 Chapter.5, Item No.5.7.3 Supplying & fixing of porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers etc., complete. 63 Amps Each 401.0 401.0 24.0 False None None False None False 9624.0 0 3937360 152184 None S.R.Electrical 2023.24Chapter.5, Item No.5.18.4 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing material sand 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10 K and complete wiring as required confirming to IEC60898. Each 739.0 739.0 12.0 False None None False None False 8868.0 0 3937361 152184 None S.R.Electrical 2023.24 Chapter.5, Item No.5.19.5 Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clA, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS enclosure. Each 2932.0 2932.0 12.0 False None None False None False 35184.0 0 3937362 152184 None S.R.Electrical 2023.24 Chapter.5, Item No.5.20.1 Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board. Each 4277.0 4277.0 18.0 False None None False None False 76986.0 0 3937363 152184 None S.R.Electrical 2023.24 Chapter.5, Item No.5.42.2 Fabricating supplying and mounting MS box made out 16 SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clA with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour etc., complete. Sq CM 0.43 0.43 2000.0 False None None False None False 860.0 0 3937364 152184 None S.R.Electrical 2023.24 Chapter.11, Item No.11.11.4 Supplying & fixing of retrofit type.LED bulb . W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRIgreather than70%. efficacygreather than 80 lumen per W, lifegreather than25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PFgreather than 0.95, power loss should less than 5% of lamp Wage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. Each 154.0 154.0 12.0 False None None False None False 1848.0 0 3937365 152184 None S.R.Electrical 2023.24 Chapter.11, Item No.11.11.5 Supplying & fixing of retrofit type.LED bulb . W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRIgreather than70%. efficacygreather than 80 lumen per W, lifegreather than25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PFgreather than 0.95, power loss should less than5% of lamp Wage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. Each 269.0 269.0 12.0 False None None False None False 3228.0 0 3937366 152184 None S.R.Electrical 2023.24 Chapter.5 Item No 5.44.1 Supply and Installation / Fixing / Provision of Outdoor type Thermoplastic Modular Panel enclosure with transparentPolycarbonate Lid, shock proof, IP65 (Weather Proof), rust proof, dust proof, water proof, corrosion proof having internally Embedded gasket on both lid and flap suitable to fix Single Phase / Three Phase Energy Meter in suitable base plate and having a provision for Fuse / MCB cut-out with suitable transparent hinged flap opening for operating MCB along with complete tamper proof SEALING facility. 300 mm x 300 mm x 214 mm mm Each 4512.0 4512.0 6.0 False None None False None False 27072.0 0 3937367 152184 None UniSR 2023.24, Vol.VI, Item No.32.04 Code.287056 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part- 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 No 88418.0 88418.0 0.02 False None None False None False 1768.36 0 3937368 152184 None BESCOM Part III 2023.24, Item No Item No.51.01 GI Grounding pipe, B - Class, 42 mm dia, 2.5 Mtr long, 3.2 mm thick with bolt, nut, GI Strips and washer completeMinimum Weight of GI Pipe: 7.3 Kg No 743.0 743.0 6.0 False None None False None False 4458.0 0 3937369 152184 None S.R.Electrical 2023.24, Item No.51.02,Code.600095 Grounding Material Good Quality well burnt Charcoal for grounding purposes packed in non returnable gunny bag of 30 Kg each No 676.0 676.0 1.0 False None None False None False 676.0 0 3937370 152184 None S.R.Electrical 2023.24, Item No.51.03,Code.607054 Grounding Material Good Quality Salt for grounding purposes packed in 50 Kg gunny bag Bag 310.0 310.0 1.0 False None None False None False 310.0 0 3937371 152184 None S.R.Electrical 2023.24, Item No.53.03 LT Single Phase 5-30 Amps, DLMS Complaint Static Energy Meter, 1.0 Accuracy Class (Used for LT-2, LT-3 & LT-5 Installations) No 958.0 958.0 7.0 False None None False None False 6706.0 0 3937372 152184 None PWD.2023.24.Vol.2.Page No.122.Item No.13.32.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. Mtr 424.48 424.48 40.0 False None None False None False 16979.2 0 3937373 152184 None PWD.2023.24.Vol.2.Page No.122.Item No.13.32.3 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. Mtr 534.24 534.24 35.0 False None None False None False 18698.4 0 3937374 152184 None PWD SR.2023.24.Vol.2.Page No.117.Item No.13.1.1. Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee,including cutting and threading the pipe etc. complete : No 680.96 680.96 12.0 False None None False None False 8171.52 0 3937375 152184 None PWD SR.2023.24.Vol.2.Page No.120.Item No.13.18.2. Providing and fixing PTMT stop cock of approved quality and colour 20 mm nominal bore,89 mm long,weighing not less than 88 g No 161.28 161.28 36.0 False None None False None False 5806.08 0 3937376 152184 None PWD SR.2023.24.Vol.2.Page No.117.Item No.13.4.1. Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) :25 mm nominal bore No 614.88 614.88 12.0 False None None False None False 7378.56 0 3937377 152184 None PWD SR.2023.24.Vol.2.Page No.120.Item No.13.17.1 Providing and fixing PTMT bib cock of approved quality and colour. 15mm nominal bore,86 mm long,weighing not less than 88 g Each 176.96 176.96 36.0 False None None False None False 6370.56 0 3937378 152184 None PWD SR.2023.24.Vol.2.Page No.119.Item No.13.11.2 Providing and fixing G.I. Union in existing G.I. pipe line,cutting and threading the pipe and making long screws,including excavation,refilling the earth or cutting of wall and making good the same complete wherever required : 20 mm nominal bore Set 632.8 632.8 24.0 False None None False None False 15187.2 0 3937379 152184 None PWD SR.2023.24.Vol.2.Page No.115.Item No.13.6.1.1 Providing and fixing gun metal non- return valve of approved quality (screwed end) : 25 mm nominal bore Horizontal No 694.4 694.4 12.0 False None None False None False 8332.8 0 3937380 152184 None PWD SR.2023.24.Vol.2.Page No.123.Item No.13.34 Providing and placing on terrace (at all floor levels) polyethylene water storage tank,IS 12701 marked,with cover and suitable locking arrangement and making necessary holes for inlet,outlet and overflow pipes but without fittings and the base support for tank. Ltr 8.96 8.96 3000.0 False None None False None False 26880.0 0 3937381 152184 None PWD SR.2023.24.Vol.2.Page No.125.Item No.13.51 Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size),i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick,finished with a floating coat of neat cement complete as per standard design : With common burnt clay (non modular) bricks of class designation 3.5 Each 1910.72 1910.72 12.0 False None None False None False 22928.64 0 3937382 152184 None PWD SR.2023.24.Vol.2.Page No.131.Item No.14.1.1 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap,10 litre low level white P.V.C. flushing cistern,including flush pipe,with manually controlled device (handle lever) conforming to IS : 7231,with all fittings and fixtures complete,including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests Each 5470.08 5470.08 6.0 False None None False None False 32820.48 0 3937383 152184 None PWD SR.2023.24.Vol.2.Page No.125.Item No.13.48 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A,including jointing with seal ring conforming to IS : 5382,leaving 10 mm gap for thermal expansion,(i) Single socketed pipes 100 mm diameter Mtr 325.92 325.92 70.0 False None None False None False 22814.4 0 3937384 152184 None PWD SR.2023.24.Vol.2.Page No.119.Item No.13.10.5 Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) :40 mm nominal bore Nos 570.08 570.08 24.0 False None None False None False 13681.92 0 3937385 152184 None PWD SR.2023.24.Vol.5.Page No.113.Item No.10.1.6 Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite,rolling and lowering into trenches,laying true to line and level and perfect linking at joints,testing and commissioning,including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type,with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. complete For: PVC pipes 90mm dia.,6 kg/sqcm & class 3 Mtr 329.28 329.28 50.0 False None None False None False 16464.0 0 3937386 152184 None PWD SR.2023.24.Vol.5.Page No.113.Item No.10.1.7 Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite,rolling and lowering into trenches,laying true to line and level and perfect linking at joints,testing and commissioning,including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type,with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. complete For: PVC pipes 110mm dia.,6 kg/sqcm & class 3 Mtr 460.32 460.32 35.0 False None None False None False 16111.2 0 3937387 152184 None PWD SR.2023.24.Vol.2.Page No.136.Item No.14.31 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. Each 1366.4 1366.4 6.0 False None None False None False 8198.4 0 3937388 152184 None PWD SR.2023.24.Vol.2.Page No.132.Item No.14.7.2 Providing and fixing wash basin with C.I. brackets,15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern,including painting of fittings and brackets,cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap Each 2868.32 2868.32 6.0 False None None False None False 17209.92 0 3937389 152184 None PWD SR.2023.24.Vol.2.Page No.134.Item No.14.10.2.2 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm,including painting of fittings and brackets,cutting and making good the walls wherever required :610x460 mm bowl depth 200 mm Each 3180.8 3180.8 6.0 False None None False None False 19084.8 0 3937390 152184 None PWD SR.2023.24.Vol.5.Page No.157.Item No.13.40.1 Supply and delivery of Centrifugal pumpset at site brand new best make and with discharge duty confirming to ISI standards and its latest amendments 2 HP,Size 65x50 Head 13M,Discharge 462 LPM Each 17483.2 17483.2 6.0 False None None False None False 104899.2 0 1725626106000 0 None None Other Works Construction of shade in front of Kokti Mahasati temple. 253854.96 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3937391 152185 None PWD SR.2023.24.Vol.1.Page No.8.Item No.1.14.1 Mechanical Means Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. In all kinds of soils Depth upto 3 m Cum 114.24 114.24 10.0 False None None False None False 1142.4 0 3937392 152185 None PWD SR.2023.24.Vol.1.Page No.15.Item No.2.1.3 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates Cum 6707.68 6707.68 1.0 False None None False None False 6707.68 0 3937393 152185 None PWD SR.2023.24.Vol.1.Page No.16.Item No.2.4.2 Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 7081.76 7081.76 2.43 False None None False None False 17208.6768 0 3937394 152185 None PWD SR.2023.24.Vol.1.Page No.16.Item No.2.5.1 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 7425.6 7425.6 0.36 False None None False None False 2673.216 0 3937395 152185 None PWD SR.2023.24.Vol.2.Page No.77.Item No.11.2 Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-inCharge. Kg 126.56 126.56 317.79 False None None False None False 40219.5024 0 3937396 152185 None PWD SR.2023.24.Vol.2.Page No.26.Item No.7.38 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 g/m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 m or as desired by Engineer in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. Sqm 636.16 636.16 36.0 False None None False None False 22901.76 0 3937397 152185 None PWD SR.2023.24.Vol.2.Page No.27.Item No.7.39.6 Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 g/m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :Gutter (600 mm over all girth) Mtr 1202.88 1202.88 10.0 False None None False None False 12028.8 0 3937398 152185 None PWD SR.2023.24.Vol.2.Page No.48.Item No.8.40 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 128.8 128.8 1172.15 False None None False None False 150972.92 0 1725626106000 0 None None Other Works Installation of sheets at the top of Vikala Chetana School. 613948.37 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3937399 152186 None PWD SR.2023.24.Vol.1.Page No.8.Item No.1.14.1 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m,as per drawing and technical specifications,including setting out,shoring,strutting,barricading,caution lights,including dressing of excavated surfaces,disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour,tools,usage of machinery & other appurtenaces required to complete the work Cum 114.24 114.24 3.072 False None None False None False 350.94528 0 3937400 152186 None PWD SR.2023.24.Vol.1.Page No.15.Item No.2.1.4 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed,laid in layers not exceeding 150 mm thickness,well compacted using plate vibrators,including all lead & lifts,cost of all materials of quality,labour,Usage charges of machineries,curing,and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Cum 6963.04 6963.04 0.32 False None None False None False 2228.1728 0 3937401 152186 None PWD SR.2023.24.Vol.1.Page No.15.Item No.2.2.1 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers,well compacted using needle vibrators,including all lead & lifts,cost of all materials,quality confirming to the requirements of relevant IS codes ,labour,Usage charges of machinery,curing and all the other appurtenances required to complete the work as per technical specifications. (The cost 'of steel reinforcement & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 7544.4 7544.4 0.64 False None None False None False 4828.416 0 3937402 152186 None PWD SR.2023.24.Vol.1.Page No.16.Item No.2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building ,Road works,Water works,Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers,well compacted using needle vibrators. The cost includes all lead & lifts,cost of all materials,quality confirming to the requirements of relevant IS codes ,labour,Usage charges of machinery,curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement,dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 12454.26 12454.26 0.41 False None None False None False 5106.2466 0 3937403 152186 None PWD SR.2023.24.Vol.1.Page No.16.Item No.2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building ,Road works,Water works,Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers,well compacted using needle vibrators. The cost includes all lead & lifts,cost of all materials,quality confirming to the requirements of relevant IS codes ,labour,Usage charges of machinery,curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement,dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 11769.96 11769.96 0.38 False None None False None False 4472.5848 0 3937404 152186 None PWD SR.2023.24.Vol.1.Page No.16.Item No.2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building ,Road works,Water works,Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers,well compacted using needle vibrators. The cost includes all lead & lifts,cost of all materials,quality confirming to the requirements of relevant IS codes ,labour,Usage charges of machinery,curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement,dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 11085.66 11085.66 2.45 False None None False None False 27159.867 0 3937405 152186 None PWD SR.2023.24.Vol.2.Page No.18.Item No.2.11 Supplying,fitting and placing TMT FE 550/550D Steel Reinforcement including cost of all materials,machinery,labour,cleaning,straightening,cutting,bending,hooking,laping/welding joints,tying with binding wire/soft annealed steel wire and other ancilary operations complete as per drawing andtechnical specification Tonne 100191.84 100191.84 0.346 False None None False None False 34666.37664 0 3937406 152186 None PWD SR.2023.24.Vol.2.Page No.84.Item No.11.25.2 Providing and fixing Steel work welded in built up sections/framed work,including cutting,hoisting,fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings,frames,guard bar,ladder,railings,brackets,gates and similar works including cost of materials,labour,usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Kgs 152.32 152.32 284.91 False None None False None False 43397.4912 0 3937407 152186 None PWD SR.2023.24.Vol.1.Page No.15.Item No.2.2.3 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers,well compacted using needle vibrators,including all lead & lifts,cost of all materials,quality confirming to the requirements of relevant IS codes ,labour,Usage charges of machinery,curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 12063.74 12063.74 0.486 False None None False None False 5862.97764 0 3937408 152186 None PWD SR.2023.24.Vol.1.Page No.16.Item No.2.5.1 Providing and laying in position Reinforced cement concrete for all Super structures of building ,Road works,Water works,Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers,well compacted using needle vibrators. The cost includes all lead & lifts,cost of all materials,quality confirming to the requirements of relevant IS codes ,labour,Usage charges of machinery,curing andall other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement,dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarseaggregates Cum 11880.96 11880.96 1.05 False None None False None False 12475.008 0 3937409 152186 None PWD SR.2023.24.Vol.2.Page No.77.Item No.11.2 Providing and fixing Structural Steel work riveted,bolted or welded in built up sections,trusses and framed work,including cutting,hoisting,fixing in position and applying a priming coat of approved steel primer all complete including cost of materials,labour,usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Kgs 126.56 126.56 1027.401 False None None False None False 130027.87056 0 3937410 152186 None PWD SR.2023.24.Vol.2.Page No.26.Item No.7.38 Providing and fixing precoated galvanised iron profile sheets (size,shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per m2 as per IS: 277,in 240 mpa steel grade,5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 m or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x 55 mm) with EPDM seal,complete upto any pitch in horizontal/vertical or curved surfaces,excluding the cost of purlins,rafters and trusses and including cutting to size and shape wherever required. Sqm 636.16 636.16 133.5 False None None False None False 84927.36 0 3937411 152186 None PWD SR.2023.24.Vol.2.Page No.26.Item No.7.39.2 Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness,Zinc coating 120 grams per m2 as per IS: 277,in 240 mpa steel grade,5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/self tapping screws complete : Flashings/Aprons.( Upto 600 mm) Mtr 462.56 462.56 16.0 False None None False None False 7400.96 0 3937412 152186 None CSR.2023.24.Vol.2.Page No.47.Item No.8.33.3 Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90L/10 sqm over an under coat of primer applied @ 0.80 L/10 m² of approved brand and manufacture including preparing the surface after thorougly cleaning oil,grease,dirt and foreign matter,cost of materials,labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 155.68 155.68 240.444 False None None False None False 37432.32192 0 3937413 152186 None CSR.2023.24.Vol.2.Page No.17.Item No.6.33 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/cum and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part-I)-2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials,labour,scaffolding and curing,usage charges of machinery etc complete as per specifications. Sqm 1378.72 1378.72 123.459 False None None False None False 170215.39248 0 3937414 152186 None CSR.2023.24.Vol.2.Page No.42.Item No.8.6.1 Providing 12 mm cement plaster with Cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick masonry including rounding off corners wherever required smooth rendering,providing and removing scaffolding,including cost of materials,labour,curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 361.76 361.76 119.959 False None None False None False 43396.36784 0 1725626106000 0 None None Other Works Replacement of main pipeline from Kadvinakatta Pump House and construction of Hanuman Nagar Bore Well. and drinking water system. 2116479.69 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3937415 152187 None PWD SR.2023.24.Vol.5.Page No.200.Item No.16.36 Clearing and grubbing land including uprooting rank vegetable grass,bushes,shrubs,saplings and trees upto 300mm girth by manual means,in areas of light jungle,removal of stumps,disposal of unserviceable materials,stacking of serviceable materials from road boundary etc. including cost of labour charges,all lead and lifts,etc. complete as directed by the Engineer in charge Sqm 20.16 20.16 585.0 False None None False None False 11793.6 0 3937416 152187 None PWD SR.2023.24.Vol.5.Page No.19.Item No.2.13.5 Removing and cleaning the CI/DI pipes and specials including jointing materials,washing (excluding valves) etc. for 250mm dia. pipes & specials Rmtr 141.12 141.12 390.0 False None None False None False 55036.8 0 3937417 152187 None PWD SR.2023.24.Vol.5.Page No.19.Item No.2.13.5 Removing and cleaning the CI/DI pipes and specials including jointing materials,washing (excluding valves) etc. for 150mm dia. pipes & specials Rmtr 141.12 141.12 20.0 False None None False None False 2822.4 0 3937418 152187 None PWD SR.2023.24.Vol.5.Page No.51.Item No.4.1.4 Providing and laying Ductile Iron pipes of class - conforming to IS 8329:2000 with latest amendments,conveyiing to work site,rolling and lowering into trenches,laying true to line,level and perfect linking at joints,testing and commissioning,including loading and unloading at both destinations,cutting of pipes wherever necessary,jointing with DI specials (excluding cost of specials) and rubber gaskets,cleaning the socket and spigot end with soap solution,applying soft soap to the socket and spigot ends before insertion of rubber gaskets,jacking and fixing in perfect conditions etc. The cost to include soap solution,soft soap,waste etc. and giving necessary hydraulic test to the required pressure as per ISS with all lead and lifts and cost of all jointing materials. (The contractor will make his own arrangements for water for testing. Earth work excavation in trenches to be measured and paid for seperately) Note: In sewerage projects for internal cement mortal lining(CML)of DI pipes,if High Alumina Cement(HAC)as recommended in Annexure B clause 16.3 of IS8329:2000 is considered in place of Slag or Sulphate Resistance Cement(SRC ),the cost of pipes may be increased by 5-6% from the prices listed. Rmtr 3516.8 3516.8 390.0 False None None False None False 1371552.0 0 3937419 152187 None PWD SR.2023.24.Vol.5.Page No.51.Item No.4.1.2 Providing and laying Ductile Iron pipes of class - conforming to IS 8329:2000 with latest amendments,conveying to work site,rolling and lowering into trenches,laying true to line,level and perfect linking at joints,testing and commissioning,including loading and unloading at both destinations,cutting of pipes wherever necessary,jointing with DI specials (excluding cost of specials) and rubber gaskets,cleaning the socket and spigot end with soap solution,applying soft soap to the socket and spigot ends before insertion of rubber gaskets,jacking and fixing in perfect conditions etc. The cost to include soap solution,soft soap,waste etc. and giving necessary hydraulic test to the required pressure as per ISS with all lead and lifts and cost of all jointing materials. (The contractor will make his own arrangements for water for testing. Earth work excavation in trenches to be measured and paid for seperately) Note: In sewerage projects for internal cement mortal lining(CML)of DI pipes,if High Alumina Cement(HAC)as recommended in Annexure B clause 16.3 of IS8329:2000 is considered in place of Slag or Sulphate Resistance Cement(SRC ),the cost of pipes may be increased by 5-6% from the prices listed. Rmtr 2257.92 2257.92 20.0 False None None False None False 45158.4 0 3937420 152187 None PWD SR.2023.24.Vol.5.Page No.5.Item No.1.5.8 Suppling Ductile Iron Push on special confirming to IS 9523:2000. All Socketed D.I. Un-Equal Tees 250mm X 100mm No 7008.96 7008.96 5.0 False None None False None False 35044.8 0 3937421 152187 None PWD SR.2023.24.Vol.5.Page No.133.Item No.11.15.11 Supply and delivery at site GM (copper alloy) gate valves confirming to Class-I as per IS 778 with latest amendments,1 No. screwed in bonnet inside screw,rising spring spindle integral seat screwed females ends confirming to IS 554/ 1990 body hydraulically tested 1.5HP seat standard tested 1 HP with IS mark. For 150 mm dia GM (Copper alloy) Gate valves Each 2936.64 2936.64 3.0 False None None False None False 8809.92 0 3937422 152187 None PWD SR.2023.24.Vol.5.Page No.130.Item No.11.8.11 Supply and delivery at site wrought middle steel (galvanized) GI bend confirming to IS 1239-II,1991 with latest amendments if any.For 150 mm dia GI BEND Each 598.08 598.08 3.0 False None None False None False 1794.24 0 3937423 152187 None PWD SR.2021.22.Vol.5.Page No.129.Item No.11.6.11 Supply and delivery at site wrought middle steel (galvanized) GI bend confirming to IS 1239-II,1991 with latest amendments if any.For 150 mm dia GI collar Each 712.32 712.32 4.0 False None None False None False 2849.28 0 3937424 152187 None PWD SR.2021.22.Vol.3.Page No.78.Item No.8.54 Providing and fixing board displaying information,such as 'Name of work,Tender cost,Name of Contractor,Work completion and liability period etc,having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border/messages/symbols etc. with approved colour shade paint complete,on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm,3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 oncrete block of size 60 cm x 60 cm x 75 cm including,excavation,refilling,transportation,and labour etc complete. Spec. No. As directed by Engineer in Charge & MoRTH specification 804 No 10080.0 10080.0 1.0 False None None False None False 10080.0 0 3937425 152187 None PWD SR.2023.24.Vol.9.Page No.60.Item No.1.10.3 Suppling Ductile Iron Push on special confirming to IS 9523:2000.All D.I. Flanged MJ COLLAR Each 1966.72 1966.72 2.0 False None None False None False 3933.44 0 3937426 152187 None PWD SR.2023.24.Vol.9.Page No.60.Item No.1.10.3 Suppling Ductile Iron Push on special confirming to IS 9523:2000.All D.I. Flanged MJ COLLAR Each 3551.52 3551.52 4.0 False None None False None False 14206.08 0 3937427 152187 None 4.2.1 Fabricating,supplying and erection of. ms long hot dip Galvanized Octagonal hot dip Pole with BSEN10025 grade S355JO steel plate for shaft,IS2062 for base plate with door opening arrangements,including suitable boards,Bakelite sheet and MCBs as per IS specification suitable to withstand the wind speed of 47m/s for. m Pole in single section and single joint welded as per IS9595/IS10178 AWS having dimensions bottom. mm,top. mm with 3mm thick,suitable base plate and 4 Nos of. long J bolts along with template and the Pole shall be hot dip galvanized in single dipping with not less than 65 micron as per ASTM-A123 and 153 etc.,(excluding foundation) as per drawing appended. 3 m.Top 70 mm and Bottom 94 mm dia 5 mm thickness Each 6300.0 6300.0 4.0 False None None False None False 25200.0 0 3937428 152187 None 11.9.2 Supply of LED floodlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate/clear glass material,delivering superior light output Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%,CCT greather than 5500K,IP 66 optical and electrical compartment & impact resistance of complete luminaire greather than IK08. Power Factor greather than 0.9 with mains,Surge Protection- Min 5KV along with Over voltage/ Overload,short circuit/ miss-wiring protection. Compatible for pole mauling with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100 V to 270V 50/60Hz application. Compliance to IS 10322/ IEC 60598,LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with W System Power consumption. LED Efficiency greather than 1301m/w,nominal CRI greather than 75. Luminaire manufacturer should have in- house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008. Housing with supplier word mark/name shall be Engraved/Embossing on the die cast housing/Body part Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should LED Floodlight 100W Each 9486.0 9486.0 3.0 False None None False None False 28458.0 0 3937429 152187 None 2.3.4 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade,multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments.4 mm2 Mtr 63.0 63.0 80.0 False None None False None False 5040.0 0 3937430 152187 None 5.48 Supplying and fixing Microprocessor Based Astronomical timer Switch with using necessary bolts,nuts and washers. Each 4843.0 4843.0 1.0 False None None False None False 4843.0 0 3937431 152187 None 1.1.2 Supplying heavy gauge PVC conduit pipe . dia mm thick confirming to IS 2509 with suitable size bends,junction boxes,adhesive paste etc,and fixing using inverted wood plugs in case of RCC ceiling and RCC wall/ stone structure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws. 25 mm dia 2 mm thick Mtr 81.0 81.0 10.0 False None None False None False 810.0 0 3937432 152187 None 5.18.6 50-63 A DP Each 1102.0 1102.0 1.0 False None None False None False 1102.0 0 3937433 152187 None 5.9.3 Supplying and fixing HRC fuse units base on existing switch/panel board. 100 to 300 A Each 919.0 919.0 1.0 False None None False None False 919.0 0 3937434 152187 None 5.20.8 Supplying,fixing and wiring Residual current circ uit breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board. 32-40 A 2 pole Each 5147.0 5147.0 1.0 False None None False None False 5147.0 0 3937435 152187 None 12.60.1 Supplying & Fixing Chemical earthling for grounding. Conduits,IC cut-outs & other equipments backfill compound which is non-corrosive,thermally conductive,potential to permissible limits,superior Fault conduction capacity,non-toxic,weather resistance & capable of achieving ohmic value less than one ohm. Using 4ft. Copper bonded rod with backfill compound" Each 4528.0 4528.0 1.0 False None None False None False 4528.0 0 3937436 152187 None 12.58.2 GI/Copper strips for grounding connections,using necessary fixing materials as required. 25 x 3 mm GI strip Mtr 85.0 85.0 10.0 False None None False None False 850.0 0 3937437 152187 None 12.58.25 1.1 kV,XLPE or Heat resistant PVC insulated,PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1,Armouring strip thickness and resistivity as per IS-3975 16 Sqmm,4 Core,(11 GI Strips.4 x 0.8 mm) Km 141842.0 141842.0 0.08 False None None False None False 11347.36 0 3937438 152187 None PWD SR.2023.24.Vol.5.Page No.142.Item No.12.24 Labour charges for Lifting of non functioning submersible pump set along with cable and GI pipes (Each length = 6m)). for 50 mm Job 256.48 256.48 16.666 False None None False None False 4274.49568 0 3937439 152187 None PWD SR.2023.24.Vol.5.Page No.140.Item No.12.6 Re-drilling of filled-up borewell,including yield test at final depth Rmtr 497.28 497.28 200.0 False None None False None False 99456.0 0 3937440 152187 None PWD SR.2023.24.Vol.5.Page No.143.Item No.12.32 Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and latest ammendments,electrical resistance welded steel tubes,material and conforming to IS 1387-1993 and manufactured by basic open hearth electric or basic oxygen process in random length of 5-7m both ends.threaded conforming to IS 554-1985 one end fixed with socket conforming to IS 4270-2001 and the other end with screwed pipes all shall be responsibaly free from defects. The tubes shall be responsible straight end should be with ISI marking weighing 25.10kg/m.prices include Collar-Medium duty Rmtr 2164.96 2164.96 20.0 False None None False None False 43299.2 0 3937441 152187 None PWD SR.2023.24.Vol.5.Page No.143 Item No.12.33 Providing and fixing MS casing collars as per IS 1239 (part-II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum). The dimensions of caps and colars shall be strictly as per IS 1239 (Part-II) 1982 with all amendments Each 168.0 168.0 5.0 False None None False None False 840.0 0 3937442 152187 None PWD SR.2023.24.Vol.5.Page No.155 143.Item No.12.34 Providing and laying at site of work MS casing caps as per IS 1239 (part II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum). The dimensions of caps and colars shall be strictly as per IS 1239 (Part-II) 1982 with all amendments including cost of material and labour charges for fixing,if any etc. complete with all lead and lifts and as directed by the Engineer in charge Each 183.68 183.68 1.0 False None None False None False 183.68 0 3937443 152187 None PWD SR.2023.24.Vol.5.Page No.153.Item No.13.18.4 Providing,supplying to work site,Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase,SS Bowl & Impeller with Low volt Motor as per specifications,as per necessary ammendments and instructions of engineer incharge of work. For 15.00 HP.155 LPM @ 210 m = 15 STG Outlet Dia.2.00 Each 69246.24 69246.24 1.0 False None None False None False 69246.24 0 3937444 152187 None PWD SR.2023.24.Vol.5.Page No.154 Item No.13.22.2 Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendments 1x3x2.5 m2 Rmtr 95.2 95.2 200.0 False None None False None False 19040.0 0 3937445 152187 None PWD SR.2023.24.Vol.5.Page No.162.Item No.13.25.1 Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments Size 50 mm Each 1400.0 1400.0 2.0 False None None False None False 2800.0 0 3937446 152187 None PWD SR.2023.24.Vol.5.Page No.156 Item No.13.32 Labour charges for Erection,Electrification and commissioning of Pump sets,including aligning and balancing of all items including supply and erection of two pair of supporting clamps,bore well caps,cable clips and water tight gland cable protectors,bolts,nuts,valve and gauges,tools and equipments etc.,involved in the job as per specifications,with necessary tests as per specifications,with testing of as per instructions of engineer incharge of work. Job 7280.0 7280.0 1.0 False None None False None False 7280.0 0 3937447 152187 None PWD SR.2023.24.Vol.5.Page No.155 Item No.13.23.3 Supply,installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No,Analog Ammeter,1 No Analog Voltmeter 1ni with Phase selector switch,Isolating switch OUTGOINGfor Main Electrical Pump: 1 No. MCB 1 No. DOL of S/D Starter suitable for respective HP 1 No. Electrcal Protection Like single Phase preventor,under voltage over Volage,under current over current & dry run protection suitable for the pump described above 1 no Indoor type NOTE: 1) DOL Direct Online Starter 2) S-D- Star Delta Starter 6 to 15 HP pumps Each 17808.0 17808.0 1.0 False None None False None False 17808.0 0 3937448 152187 None PWD SR.2023.24.Vol.5.Page No.155 Item No.13.30 Supply and delivery at site Accessories for Single Phase pumpset like SS Groove Nipples,SS Studs & Nuts,Screw Clips &water proof Insulation Tape etc complete with ISI mark Each 5040.0 5040.0 1.0 False None None False None False 5040.0 0 3937449 152187 None 5.35 Supplying,fixing and wiring Electronic Trivector Meter (ETV) 5to32/63A three phase4 wire whole current class-1 Accuracy Energy Meter. Each 6389.6 6389.6 1.0 False None None False None False 6389.6 0 3937450 152187 None PWD SR.2023.24.Vol.5.Page No.157.Item No.13.39 Earthing: Supplying and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit. The pits should be filled up with equal proportion of salt and charcoal 150mm around the pipe to complete depth. The connection from the pipe to the conduits etc. is to established through GI wire of sizes as per clause 7.3.3 of IS 732 using 12mm bolts,nuts,washers and check nuts,the pipe shall have 16 through holes of 12mm dia. Job 4200.0 4200.0 1.0 False None None False None False 4200.0 0 3937451 152187 None SR.2022.23,Part.3,Page No.9.Item No.32.10 1.1 kV,XLPE or Heat resistant PVC insulated,PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1,Armouring strip thickness and resistivity as per IS-3975 35 Sqmm,4 Core,(15 GI Strips.4 x 0.8 mm) Km 197198.4 197198.4 0.23 False None None False None False 45355.632 0 3937452 152187 None SR.20223.24,Part.3,Page No.10.Item No. Epoxy Terminating Kit (Pothead) suitable for 1.1 kV,LTUG Cable Up to 4C x 50 Sqmm Km 362.88 362.88 1.0 False None None False None False 362.88 0 3937453 152187 None SR.2022.23,Part.4,Page No.52 of 81. Item No.21.06 Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff HT Cable 35 to 95 Sqmm Km 34875.68 34875.68 0.2 False None None False None False 6975.136 0 3937454 152187 None SR.2023.24,Part.4,Page No.63 of 81.Item No.29.02 Earth work excavation for cable trench of 0.5 to 0.75 Mtr. Width and Depth upto 1 Mtr including trial pits,depositing on bank upto a lead of 50 Mtr,Supplying and Displaying necessary Danger Boards and Lighting,Using sight Rails and Sign Boards at every 100 Mtr wherever necessary as directed. Ordinary Soil Cum 291.2 291.2 135.0 False None None False None False 39312.0 0 3937455 152187 None R.2022.23,Part.4,Page No.63 of 81. Item No.29.07 Refilling the cable trenches with selected available earth from trench excavation including watering,consolidation in layers of 15 cm. Thickness including depositing of the surplus earth with a lead of 200 Mtr Cum 64.96 64.96 135.0 False None None False None False 8769.6 0 3937456 152187 None PWD SR.2023.24.Vol.5.Page No.128.Item No.11.3.6 Providing,Laying and Fixing GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary,including testing for water tightness,with all lead and commissioning. (contractor will make his own arrangements for procuring water for testing) Heavy Duty GI pipe of 50mm dia Rmtr 760.48 760.48 100.0 False None None False None False 76048.0 0 3937457 152187 None PWD SR.2023.24.Vol.5.Page No.66.Item No.2.6.5 Labour charges for laying and jointing GI pipes with earth work including fixing collars,elbows,tees,bends,gland cocks and other fittings with cuts and threads,white lead paints wherever necessary,conveying the materials from office to workspot and retuning the surplus materials from workspot to stores for:50mm dia. GI pipes & specials. Rmtr 35.84 35.84 100.0 False None None False None False 3584.0 0 3937458 152187 None PWD SR.2023.24.Vol.1.Page No.15.Item No.2.1.3 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed,laid in layers not exceeding 150 mm thickness,well compacted using plate vibrators,including all lead & lifts,cost of all materials of quality,labour,Usage charges of machineries,curing,and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately). Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates Cum 6707.68 6707.68 0.729 False None None False None False 4889.89872 0 1725626106000 0 None None Other Works Installation of light to Bunder road divider. 846438.54 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3937459 152188 None PWD SR.2023.24 .Vol.3.Page No.13.Item No.2.27 Removal of Telephone/Electric Poles and Lines Removal of telephone/ Electric poles including excavation and dismantling of foundation concrete and lines under the supervision of concerned department, disposal with all lifts and lead and stacking the serviceable and unserviceable material separately Cum 379.68 379.68 18.0 False None None False None False 6834.24 0 3937460 152188 None PWD SR.2023.24.Vol.1.Page No.8.Item No.1.14.1 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usageof machinery & other appurtenaces required to complete the work Cum 114.24 114.24 18.0 False None None False None False 2056.32 0 3937461 152188 None PWD SR.2023.24.Vol.1.Page No.15.Item No.2.1.3 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing,and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates Cum 6707.68 6707.68 1.8 False None None False None False 12073.824 0 3937462 152188 None PWD SR.2023.24.Vol.1.Page No.15.Item No.2.2.1 Providing and laying in position Reinforced cement concrete for all Foundation works. he granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials,quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately)M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 7604.75 7604.75 4.374 False None None False None False 33263.1765 0 3937463 152188 None PWD SR.2023.24.Vol.1.Page No.16.Item No.2.3.1 Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 12038.99 12038.99 1.118 False None None False None False 13459.59082 0 3937464 152188 None PWD SR.2023.24.Vol.1.Page No.18.Item No.2.11 H Supplying, fitting and placing TMT FE 550/550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire/soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. All other type of structures Kg 88492.32 88492.32 0.522 False None None False None False 46192.99104 0 3937465 152188 None PWD SR.2023.24.Vol.1.Page No.7.Item No.1.9 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. Cum 297.92 297.92 11.826 False None None False None False 3523.20192 0 3937466 152188 None PWD SR.2023.24.Vol.2.Page No.84.Item No.11.25.2 Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Kg 152.32 152.32 18.0 False None None False None False 2741.76 0 3937467 152188 None 4.3 Supply and erection of 14 Feet Height Street Light Pole 14 Feet Height Street Light Pole on suitable cement concrete foundation with 2.5 Feet height dia 5mm cast iron decorative round pedestal as per design weighing not less than 37 Kgs, the pedestal shall be fitted with Class 'C' G.I. Pipe 7 Feet height 75mm outer dia and 7 feet height top piece outer dia of 65mm fixed by measure of threading/welding/coupling complete. (excluding foundation). No 20600.0 20600.0 18.0 False None None False None False 370800.0 0 3937468 152188 None 11.8.3 Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, maximum light intensity should be between 60 degrees to 70 degrees. CCT greater Than 5500K, IP66 optical and electrical compartment & impact resistance of complete luminaire greater Than IK08. Power Factor greater Than0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/miss-wiring protection. Compatible for pole mounting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with W System Power consumption. LED Efficiency greater Than1301m/w, nominal CRI greater Than75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008. Housing with supplier word mark/name shall be Engraved/Embossing on the die cast housing/Body part. Warranty of 2 Years against any manufacturing defect LED Streetlight 70W No 5992.0 5992.0 18.0 False None None False None False 107856.0 0 3937469 152188 None 32.05 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 16 Sqmm, 4 Core, (11 GI Strips.4 x 0.8 mm) Km 141842.0 141842.0 1.0 False None None False None False 141842.0 0 3937470 152188 None 13.5 Fixing halogen/metal halide/SVL/IL/LED floodlight fitting over existing pole/ wall ceiling including clA, bolts, nuts and wiring using suitable capacity wires. Each 162.0 162.0 18.0 False None None False None False 2916.0 0 3937471 152188 None 21.05 Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff 2.5 to 25 Sqmm Km 20886.0 20886.0 0.54 False None None False None False 11278.44 0 3937472 152188 None P No.63, I N0.7.20.1 Supplying and laying double walled corrugated (DWC) HDPE Pipe including all necessary connecting Socket/Coupling/Tees/Bends/End- caps of same materials in existing trench as per IS 14930 part -II suitable for drawing underground cables.40mmOD/ 32mm ID Mtr 75.0 75.0 396.0 False None None False None False 29700.0 0 3937473 152188 None 1.1.3 Supplying heavy gauge PVC conduit pipe dia mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using inverted wood plugs in case of RCC ceiling and RCC wall/stone structure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws. Mtr 106.0 106.0 180.0 False None None False None False 19080.0 0 3937474 152188 None 2.5.2 Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for working voltage up to 1100 Volts as per IS-694:1990 3C x 1.5 mm2 Mtr 72.0 72.0 54.0 False None None False None False 3888.0 0 3937475 152188 None 2.3.5 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS- 694:confirming to latest amendments. 6 mm2 Mtr 92.0 92.0 10.0 False None None False None False 920.0 0 3937476 152188 None 5.3 Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 20A single phase Class-1 Accuracy with Temper Proof Energy Meter. Each 1380.0 1380.0 1.0 False None None False None False 1380.0 0 3937477 152188 None 5.44.3 Supply and Installation/Fixing/Provision of Outdoor type Thermoplastic Modular Panel enclosure with transparent Polycarbonate Lid, shock proof, IP65(Weather Proof), rust proof, dust proof, water proof, corrosion proof having internally Embedded gasket on both lid and flap suitable to fix Single Phase/ Three Phase Energy Meter in suitable base plate and having a provision for Fuse/ MCB cut-out with suitable transparent hinged flap opening for operating MCB along with complete tamper proof SEALING facility.300 mm x 600 mm x 170 mm Each 6867.0 6867.0 1.0 False None None False None False 6867.0 0 3937478 152188 None 5.41.1 Supplying and fixing angle iron frame work fabricated out of M.S. angle iron. and M.S. flat with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. 40 x 40 x 6 mm Mtr 305.0 305.0 10.0 False None None False None False 3050.0 0 3937479 152188 None 5.48 Supplying and fixing Microprocessor Based Astronomical timer Switch with using necessary bolts, nuts and washers etc. Each 4843.0 4843.0 2.0 False None None False None False 9686.0 0 3937480 152188 None 5.13.1 Supply and fixing of 3 pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washersand wiring etc., complete with AC-3 Rating and as per IS-13947. 25 A Each 1290.0 1290.0 2.0 False None None False None False 2580.0 0 3937481 152188 None 5.18.4 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required.confirming to IEC-60898. a) 6-32Amps DP Each 739.0 739.0 2.0 False None None False None False 1478.0 0 3937482 152188 None 5.7.2 Supplying and fixing porcelain fuse channel with cutout on existing panel board using necessary nuts, bolts, washers etc., complete. 32Amps Each 241.0 241.0 2.0 False None None False None False 482.0 0 3937483 152188 None 51.01 GI Grounding pipe, B.Class, 42 mm dia, 2.5 Mtr long, 3.2 mm thick with bolt, nut, GI Strips and washer complete Minimum Weight of GI Pipe: 7.3 Kg No 743.0 743.0 2.0 False None None False None False 1486.0 0 3937484 152188 None 51.02 Good Quality well burnt Charcoal for grounding purposes packed in non returnable gunny bag of 30 Kg each. No 676.0 676.0 2.0 False None None False None False 1352.0 0 3937485 152188 None 51.03 Good Quality Salt for grounding purposes packed in 50 Kg gunny bag. Bag 310.0 310.0 2.0 False None None False None False 620.0 0 3937486 152188 None 60.02 Alluminium End Terminal (Lug) 16 Sq mm No 2.0 2.0 180.0 False None None False None False 360.0 0 3937487 152188 None 8.02 Guy Wire & GI Wire as per IS-2141 8 SWG GI Wire(4.064 mm Dia), Std Wt: 131 Kg/KM Mtr 75040.0 75040.0 0.1 False None None False None False 7504.0 0 3937488 152188 None 48.05 (Vol.5, It.No.11.2.6) GI Pipe B.Class as per IS-1239, GI Pipe.50 mm Dia Medium Duty GI pipe of 50mm dia, Mtr 584.0 584.0 2.0 False None None False None False 1168.0 0
generalCriterionList	createdTs version createdDate modifiedDate criterionType description tenderEligibilityCriterionDocumentList 1725626109000 0 None None ELIGIBILITY Tenders from Joint ventures are not acceptable. None 1725626109000 0 None None ELIGIBILITY Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka None 1725626109000 0 None None ELIGIBILITY Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document. None 1725626109000 0 None None ELIGIBILITY It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission. None 1725626109000 0 None None ELIGIBILITY EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection. None 1725631680000 0 None None ELIGIBILITY All terms and conditions as per Tender document None
preQualCriterionList	None
technicalCriterionList	createdTs version createdDate modifiedDate description criterionCategoryText criterionTypeOthersValue tenderTechnicalCriterionDocumentList None None None None Achieved in at least two financial years a minimum annual financial turnover of Rs.73.00 Lakh in the past 5 years (2019-20 to 2023-24) and attach duly signed by CA having UDIN No Others annual financial turnover createdTs version createdDate modifiedDate documentName None None None None Others -- annual financial turnover None None None None Satisfactory completed, at least any one year similar Nature of work of Value not less than Rs.36.50 Lakh as Prime Contractor Others similar Nature of work createdTs version createdDate modifiedDate documentName None None None None Others -- similar Nature of work None None None None Executed in any one year (for a continuous period of 12 months), the minimum quantities of work as per tender document Others minimum quantities of work createdTs version createdDate modifiedDate documentName None None None None Others -- minimum quantities of work None None None None Year-wise break of quantity in the past five years signed by Executive Officer should be uploaded Others Year-wise break of quantity createdTs version createdDate modifiedDate documentName None None None None Others -- Year-wise break of quantity None None None None KPWD Registration Certificate Others KPWD Registration Certificate createdTs version createdDate modifiedDate documentName None None None None Others -- KPWD Registration Certificate None None None None GST Registration Others GST Registration createdTs version createdDate modifiedDate documentName None None None None Others -- GST Registration None None None None Liquid Assets and or Availability of Credit Facilities of no less than Rs. 21.90 Lakh Others Liquid Assets createdTs version createdDate modifiedDate documentName None None None None Others -- Liquid Assets None None None None Profit and Loss Statement Others Profit and Loss Statement createdTs version createdDate modifiedDate documentName None None None None Others -- Profit and Loss Statement None None None None Adhaar Card Others Adhaar Card createdTs version createdDate modifiedDate documentName None None None None Others -- Adhaar Card None None None None Annual Turnover duly signed by CA with UDIN No duly signed by CA with UDIN No Others Annual Turnover duly signed by CA with UDIN No createdTs version createdDate modifiedDate documentName None None None None Others -- Annual Turnover duly signed by CA with UDIN No None None None None PAN Card Others PAN Card createdTs version createdDate modifiedDate documentName None None None None Others -- PAN Card None None None None IT Returns for past 5 years specified in Tender document Others IT Returns createdTs version createdDate modifiedDate documentName None None None None Others -- IT Returns None None None None Not Applicable Others Not Applicable createdTs version createdDate modifiedDate documentName None None None None Others -- Not Applicable None None None None Not Applicable Others Not Applicable createdTs version createdDate modifiedDate documentName None None None None Others -- Not Applicable None None None None Not Applicable Others Not Applicable createdTs version createdDate modifiedDate documentName None None None None Others -- Not Applicable
tenderCriterionDocumentList	documentName optional documentTypeText Annual Turnover Certificate True Technical Bid Company Registration Certificate True Technical Bid Reserved Category Certificate False Technical Bid Small Scale Industries Certificate False Technical Bid
tenderWorkLocationList
tenderAddress	createdTs 1725631913000 version 0 createdDate None modifiedDate None blockNumber District Urban Development Cell Karwar street None city karwar state Karnataka pin 581301
tenderRecallDTO	None