createdTs	None
version	None
createdDate	None
modifiedDate	None
noticeInvitingTenderDTO	createdTs 1725277006843 version 9 createdDate None modifiedDate None tenderType RFQ evaluationType TWO_COVER evaluationTypeText Two Cover invitingStrategy OPEN invitingStrategyText Open taxType INCLUSIVE_TAX tenderFee 2430.00 emd 164000.00 bidValueType ITEM_WISE bidValueTypeText Item wise tenderReceiptClose 23-09-2024 17:30:00 tenderQueryClose 13-09-2024 17:30:00 technicalBidOpen 25-09-2024 11:00:00 publishedDate 09-09-2024 15:52:57 publishedByPost DUDC_EE_SMG publishedByUser KPE11254 - NADAF VAHIDA BEGUM bidValidityPeriod 90 noOfCalls 1 preBidMeetingDate 17-09-2024 11:00:00 preBidMeetingYn True preQualificationBidOpen None denominationType RUPEES denominationTypeText Rupees retenderedYn None percentageRateTypeText None contactPerson Prasad P splitEmdRequiredYn False emdBankGuarantee None emdCash None bgValidityPeriod None hideWeightage None multipleCurrencySelectionAllowedYn False isTechWeightageAllowed False highestBidderSelection False isVariableEmdAllowed None qcbsTenderYn None itemwiseEmdRequiredYn None sampleSubmissionDate None officeNumber None mobileNumber 7892520795 tenderSupplierList None
tenderSchedule	createdTs 1725277006889 version 18 createdDate None modifiedDate None tenderNumber DMA/2024-25/BD/WORK_INDENT16212 title Construction of Building and other works for the urban local Body TMC Shikaripura Limits under Amrutha Nagarothana (Municipality) Phase-4 Project. description Construction of Building and other works for the urban local Body TMC Shikaripura Limits under Amrutha Nagarothana (Municipality) Phase-4 Project. category WORKS categoryText Works ecv 9693126.92 deptName Directorate of Municipal Administration status PUBLISHED statusText Published remarks None csrValue None ecvtenderYn True location 2202 locationName DMA District Urban Development Cell Shivamogga provisionalAmount 9701000.0 groupOverheadTotal 1478612.58 fileNumber SMGDC-DUDC/PLAN/29/91935/2022
tenderSubEstimateList	createdTs version createdDate modifiedDate workCategoryName subEstimateName estimateTotal itemList 1725277007000 0 None None Buildings Construction of Building and Park works for the urban local Body TMC Shikaripura Limits under Amrutha Nagarothana (Municipality) Phase-4 Project (Other work) 4724450.54 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3903650 150464 None PWD SR 2021 22 Vol. 1 Page No. 8 Item No. 1.14.1 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. In all kinds of soils Depth upto 3 m Cum 75.19 75.19 503.74 False None None False None False 37876.2106 0 3903651 150464 None PWD SR-2021-22 Vol. 1 Page No. 15 Item No. 2.1.2 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) 2.1.1 Mix 1:4:8 (M10) Using 40 mm and down size graded crushed coarse aggregates. Cum 5362.18 5362.18 123.25 False None None False None False 660888.685 0 3903652 150464 None PWD SR - 2021-22 Vol. 2 Page No. 8 - Item No. 5.4 Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 5512.56 5512.56 250.15 False None None False None False 1378966.884 0 3903653 150464 None PWD SR-2021-22 Vol. 1 Page No. 15 - Item No. 2.1.4 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately)Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates Cum 5899.84 5899.84 26.74 False None None False None False 157761.7216 0 3903654 150464 None PWD SR-2021-22-Vol. 1-Page No. 15-Item No. 2.2.1.1 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately)-M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 6610.99 6610.99 5.16 False None None False None False 34112.7084 0 3903655 150464 None PWD SR-2021-22-Vol. 1-Page No. 17 - Item No. 2.4.2 Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately)M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 10449.97 10449.97 0.78 False None None False None False 8150.9766 0 3903656 150464 None PWD SR-2021-22-Vol. 1-Page No. 17 - Item No. 2.5.1 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately)M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 10824.68 10824.68 2.58 False None None False None False 27927.6744 0 3903657 150464 None PWD SR-2021-22 Vol. 2-Page No. 84 - Item No. 11.32 Providing Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent members whereever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. (The laps and wastages shall not be measured separately) Kgs 94.76 94.76 757.8 False None None False None False 71809.128 0 3903658 150464 None PWD SR-2021-22 -Vol. 2- Page No. 42 - Item No. 8.8 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 316.21 316.21 34.56 False None None False None False 10928.2176 0 3903659 150464 None PWD SR-2021-22-Vol. 2 - Page No. 75 - Item No.11.1 Providing and fixing Structural Steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Kgs 99.91 99.91 8770.05 False None None False None False 876215.6955 0 3903660 150464 None PWD SR-2021-22-Vol. 2-Page No.95. - Item No. 11.58 Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. (Made of G.I. wire of dia 4 mm). Sqm 696.28 696.28 1069.82 False None None False None False 744894.2696 0 3903661 150464 None PWD SR-2021-22-Vol. 2-Page No. 82-Item No. 11.25.2 Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Kgs 123.6 123.6 1387.0 False None None False None False 171433.2 0 3903662 150464 None PWD SR-2021-22-Vol. 2 - Page No. 48- Item No. 8.41 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 133.9 133.9 2080.43 False None None False None False 278569.577 0 3903663 150464 None PWD SR-2021-22 - Vol. 2 Page No. 07- Item No. 1.8 Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work. Cum 414.06 414.06 639.8 False None None False None False 264915.588 0 1725277007000 1 None None Buildings Construction of Building and other works for the urban local Body TMC Shikaripura Limits under Amrutha Nagarothana (Municipality) Phase-4 Project. (PHS - 21.25 L) 1797038.69 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3903664 150465 None PWD SR-2021-22 Vol. 1 Page No. 8 Item No. 1.12 Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work. Cum 66.95 66.95 13.2 False None None False None False 883.74 0 3903665 150465 None PWD SR-2021-22 Vol. 1 Page No. 8 Item No. 1.14.1 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work - In all kinds of soils Depth upto 3 m Cum 75.19 75.19 92.34 False None None False None False 6943.0446 0 3903666 150465 None PWD SR-2021-22 Vol. 1 Page No. 15 Item No. 2.1.3 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Cum 5720.62 5720.62 10.52 False None None False None False 60180.9224 0 3903667 150465 None PWD SR-2021-22 Vol. 1 Page No. 15 Item No. 2.2.1.1 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately)-M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 6610.99 6610.99 2.4 False None None False None False 15866.376 0 3903668 150465 None PWD SR-2021-22 Vol. 2 Page No. 9 Item No. 5.4 Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 5512.56 5512.56 37.22 False None None False None False 205177.4832 0 3903669 150465 None PWD SR-2021-22 Vol. 1 Page No. 17 Item No. 2.4.2 Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately)M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 10449.97 10449.97 0.38 False None None False None False 3970.9886 0 3903670 150465 None PWD SR-2021-22 Vol. 1 Page No. 17 Item No. 2.4.2 Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 9220.56 9220.56 4.02 False None None False None False 37066.6512 0 3903671 150465 None PWD SR-2021-22 Vol. 1 Page No. 17 Item No. 2.5.1 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 10824.68 10824.68 1.2 False None None False None False 12989.616 0 3903672 150465 None PWD SR-2021-22 Vol. 1 Page No. 17 Item No. 2.5.1 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 7959.32 7959.32 1.0 False None None False None False 7959.32 0 3903673 150465 None PWD SR-2021-22 Vol. 1 Page No. 17 Item No. 2.5.1 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 10187.94 10187.94 2.44 False None None False None False 24858.5736 0 3903674 150465 None PWD SR-2021-22 Vol. 1 Page No. 17 Item No. 2.5.1 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 10187.94 10187.94 4.16 False None None False None False 42381.8304 0 3903675 150465 None PWD SR-2021-22 Vol. 2 Page No. 84 Item No. 11.32 Providing Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent members whereever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. (The laps and wastages shall not be measured separately) Kg 94.76 94.76 1130.72 False None None False None False 107147.0272 0 3903676 150465 None PWD SR-2021-22 Vol. 1 Page No. 7 Item No. 1.9 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. Cum 210.12 210.12 36.26 False None None False None False 7618.9512 0 3903677 150465 None PWD SR-2021-22 Vol. 2 Page No. 14 Item No.6.8 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work Cum 6890.7 6890.7 35.46 False None None False None False 244344.222 0 3903678 150465 None PWD SR-2021-22 Vol. 2 Page No. 41 Item No.8.1.1 Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 219.39 219.39 38.32 False None None False None False 8407.0248 0 3903679 150465 None PWD SR-2021-22 Vol. 2 Page No. 41 Item No.8.2.2 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 236.9 236.9 97.96 False None None False None False 23206.724 0 3903680 150465 None PWD SR-2021-22 Vol. 2 Page No. 60 Item No.9.10 Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per m2 including pointing in white cement mixed with pigment of matching shade complete. Sqm 638.6 638.6 41.34 False None None False None False 26399.724 0 3903681 150465 None PWD SR-2021-22 Vol. 2 Page No. 71 Item No.10.14 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per m2, including pointing in white cement mixed with pigment of matching shade complete. Sqm 992.92 992.92 16.14 False None None False None False 16025.7288 0 3903682 150465 None PWD SR-2021-22 Vol. 2 Page No. 45 Item No. 8.25 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 108.15 108.15 38.32 False None None False None False 4144.308 0 3903683 150465 None PWD SR-2021-22 Vol. 2 Page No. 46 Item No. 8.32 Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 litre/ 10 m2. Over and including priming coat of exterior primer applied @ 0.90 litre/10 m2 with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 115.36 115.36 97.96 False None None False None False 11300.6656 0 3903684 150465 None PWD SR-2021-22 Vol. 2 Page No. 105 Item No.12.54 Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long brackets of 15x15mm M.S Square tube, the entire door frame to be reinforced with 19x19mm M.S Square tube of 19 gauge. The door frame to be fixed to the wall using M.S. Screws of 65/80mm size complete as per manufacturers specification & direction of Engineer-in-charge. Sqm 489.25 489.25 72.0 False None None False None False 35226.0 0 3903685 150465 None PWD SR-2021-22 Vol. 2 Page No. 105 Item No.12.55.2 Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Prelaminated PVC C Channel of 5mm thick sheet & 30x50mm wide to form stiles & 5mm thick & 75mm wide Prelaminated PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet Prelaminated on either side fitted in the M.S. frame, Sealed to the stiles & rails with PVC Designer beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75mm Aluminium hinges. with one side prelam Sqm 2941.68 2941.68 22.68 False None None False None False 66717.3024 0 3903686 150465 None PWD SR-2021-22 Vol.2-Page No. 75 - Item No. 11.2 Providing and fixing Structural Steel work riveted,bolted or welded in built up sections,trusses and frramed work,including cutting,hosting,fixing in position and applying a priming coat of approved steeel primer all complete including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Kg 104.03 104.03 1220.64 False None None False None False 126983.1792 0 3903687 150465 None PWD SR-2021-22 Vol-2, Page No. 26 Item No. 7.38 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 m or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. Sqm 572.68 572.68 60.0 False None None False None False 34360.8 0 3903688 150465 None PWD SR-2021-22 Vol. 2 Page No. 27 Item No. 7.39.6 Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Gutter (600 mm over all girth) Rmtr 880.65 880.65 11.0 False None None False None False 9687.15 0 3903689 150465 None PWD SR-2021-22 Vol. 2 Page 83 Item No.11.28 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Kgs 515.0 515.0 100.0 False None None False None False 51500.0 0 3903690 150465 None PWD SR-2021-22 Vol. 2 Page 75 Item No.11.5.2 Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-Incharge including cost of materials, labour, usage charges of machinerycomplete as per specifications. Sqm 3552.47 3552.47 5.04 False None None False None False 17904.4488 0 3903691 150465 None 2021-22 Chapter 1 Item No.1.1.1 Concealed Conduit System Supplying Heavy Gauge PVC Conduit pipe 19/20 mm dia 2mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipes ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary. 19/20 mm dia 2 mm thick (S.R. Electrical Works for 2021-22 Chapter 1 Item No.1.1.1) Mtr 68.0 68.0 40.0 False None None False None False 2720.0 0 3903692 150465 None 2021-22 Chapter 1. Item No.1.2.2 Concealed Conduit System Supplying Heavy Gauge PVC Conduit pipe 25 mm dia 2mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipes ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary. 25 mm dia 2 mm thick (S.R. Electrical Works for 2021-22 Chapter 1. Item No.1.2.2) Mtr 70.0 70.0 30.0 False None None False None False 2100.0 0 3903693 150465 None 2021-22 Chapter 1, Item No.1.3.1 Concealed conduit System, Supplying Heavy Gauge PVC Conduit Pipe 19/20mm dia 2mm thick with suitable size bends, metal/PVE junction boxes adhesive paste etc., by groove cutting in the wall & fixing by using U or J hooks and cement plastering up to the wall surface and run with 18 SWG GI fish wire run through out the conduit wherever necessary.19/20 mm dia 2 mm thick (S.R. Electrical Works for 2021-22 Chapter 1, Item No.1.3.1) Mtr 75.0 75.0 30.0 False None None False None False 2250.0 0 3903694 150465 None 2021-22 Chapter 1, Item No.1.3.2 Concealed conduit System, Supplying Heavy Gauge PVC Conduit Pipe 25mm dia 2mm thick with suitable size bends, metal/PVE junction boxes adhesive paste etc., by groove cutting in the wall & fixing by using U or J hooks and cement plastering up to the wall surface and run with 18 SWG GI fish wire run through out the conduit wherever necessary.25 mm dia 2 mm thick (S.R. Electrical Works for 2021-22 Chapter 1, Item No.1.3.2) Mtr 80.0 80.0 30.0 False None None False None False 2400.0 0 3903695 150465 None 2021-22 Chapter 1, Item No.1.1.3 Concealed conduit System, Supplying Heavy Gauge PVC Conduit Pipe 32mm dia 2.5 mm thick with Confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosure. Run with 18SWG GI fish wire wherever necessary 32 mm dia 2.5 mm thick (S.R. Electrical Works for 2021-22 Chapter 1, Item No.1.1.3) Mtr 100.0 100.0 30.0 False None None False None False 3000.0 0 3903696 150465 None 2021-22 Chapter 3, Item No.3.3.1 Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/NF screws etc., complete.1-3 Way (S.R. Electrical Works for 2021-22 Chapter 3, Item No.3.3.1) Each 91.0 91.0 4.0 False None None False None False 364.0 0 3903697 150465 None 2021-22 Chapter 3, Item No.3.3.2 Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/NF screws etc., complete.4-5 Way (S.R. Electrical Works for 2021-22 Chapter 3, Item No.3.3.2) Each 122.0 122.0 4.0 False None None False None False 488.0 0 3903698 150465 None 2021-22 Chapter 3, Item No.3.3.4 Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/NF screws etc., complete.8 Way (S.R. Electrical Works for 2021-22 Chapter 3, Item No.3.3.4) Each 195.0 195.0 4.0 False None None False None False 780.0 0 3903699 150465 None 2021-22 Chapter 3, Item No.3.5.1 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.1 to 3 Module (S.R. Electrical Works for 2021-22 Chapter 3, Item No.3.5.1) Each 152.0 152.0 4.0 False None None False None False 608.0 0 3903700 150465 None 2021-22 Chapter 3, Item No.3.5.2 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.4 Module (S.R. Electrical Works for 2021-22 Chapter 3, Item No.3.5.2) Each 175.0 175.0 4.0 False None None False None False 700.0 0 3903701 150465 None 2021-22 Chapter 3, Item No.3.5.4 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.8 Module (S.R. Electrical Works for 2021-22 Chapter 3, Item No.3.5.4) Each 302.0 302.0 4.0 False None None False None False 1208.0 0 3903702 150465 None 2021-22 Chapter 3, Item No.3.6.1 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6A One Way Switch (S.R. Electrical Works for 2021-22 Chapter 3, Item No.3.6.1) Each 88.0 88.0 12.0 False None None False None False 1056.0 0 3903703 150465 None 2021-22 Chapter 3, Item No.3.6.2 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6A Two Way Switch (S.R. Electrical Works for 2021-22 Chapter 3, Item No.3.6.2) Each 152.0 152.0 4.0 False None None False None False 608.0 0 3903704 150465 None 2021-22 Chapter 3, Item No.3.6.3 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6A Three Way socket (S.R. Electrical Works for 2021-22 Chapter 3, Item No.3.6.3) Each 162.0 162.0 4.0 False None None False None False 648.0 0 3903705 150465 None 2021-22 Chapter 3, Item No.3.6.10 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.32A DP Switch (S.R. Electrical Works for 2021-22 Chapter 3, Item No.3.6.10) Each 375.0 375.0 4.0 False None None False None False 1500.0 0 3903706 150465 None 2021-22 Chapter 3, Item No.3.6.11 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6/16A Universal Socket (S.R. Electrical Works for 2021-22 Chapter 3, Item No.3.6.11) Each 249.0 249.0 4.0 False None None False None False 996.0 0 3903707 150465 None 2021-22 Chapter 2, Item No.2.1.1 Point Wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC conduit / casing capping using 1100V grade, COPPER conductor flexible multi strand FRLS PVC insulated to 2X1.5 Sqmm cabale confirming to the GTP with a 6 Amps flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Short point upto 3 Mtr from tapping point to outlet via switch. (S.R. Electrical Works for 2021-22 Chapter 2, Item No.2.1.1) Nos 276.0 276.0 12.0 False None None False None False 3312.0 0 3903708 150465 None 2021-22 Chapter 2, Item No.2.1.2 Point Wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC conduit / casing capping using 1100V grade, COPPER conductor flexible multi strand FRLS PVC insulated to 2X1.5 Sqmm cabale confirming to the GTP with a 6 Amps flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Medium point above 3Mtr upto 6Mtr from tapping point to outlet via switch. (S.R. Electrical Works for 2021-22 Chapter 2, Item No.2.1.2) Nos 386.0 386.0 12.0 False None None False None False 4632.0 0 3903709 150465 None 2021-22 Chapter 2, Item No.2.1.3 Point Wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC conduit / casing capping using 1100V grade, COPPER conductor flexible multi strand FRLS PVC insulated to 2X1.5 Sqmm cabale confirming to the GTP with a 6 Amps flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Long point above 6Mtr up to 10Mtr from tapping point to outlet via switch. (S.R. Electrical Works for 2021-22 Chapter 2, Item No.2.1.3) Nos 567.0 567.0 4.0 False None None False None False 2268.0 0 3903710 150465 None 2021-22 Chapter 3, Item No.3.1.2 Supplying 6A flush type socket and 6Amps flush type SP switch either surface / flush mounting in existing gang box or in a 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring using necessary capacity wires as required. as per IS 1293 and IS 3654 6 Amps 3/5 way (S.R. Electrical Works for 2021-22 Chapter 3, Item No.3.1.2) Each 143.0 143.0 8.0 False None None False None False 1144.0 0 3903711 150465 None 2021-22 Chapter 2, Item No.2.3.1 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100v grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694:1990 & confirming to the attached GTP 1 mm2 (S.R. Electrical Works for 2021-22 Chapter 2, Item No.2.3.1) Mtr 18.0 18.0 40.0 False None None False None False 720.0 0 3903712 150465 None 2021-22 Chapter 2, Item No.2.3.2 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100v grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694:1990 & confirming to the attached GTP 1.5 mm2 (S.R. Electrical Works for 2021-22 Chapter 2, Item No.2.3.2) Mtr 26.0 26.0 40.0 False None None False None False 1040.0 0 3903713 150465 None 2021-22 Chapter 2, Item No.2.3.3 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100v grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694:1990 & confirming to the attached GTP 2.5 mm2 Mtr 40.0 40.0 30.0 False None None False None False 1200.0 0 3903714 150465 None 2021-22 Chapter 2, Item No.2.3.4 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100v grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694:1990 & confirming to the attached GTP 4 mm2 (S.R. Electrical Works for 2021-22 Chapter 2, Item No.2.3.4) Mtr 59.0 59.0 30.0 False None None False None False 1770.0 0 3903715 150465 None 2021-22 Chapter 11, Item No.11.3.2 Supplying of .4'.feet -PVC Batten with integrated LED tube 20/22 W with high quality diffuser with Life of 25000 burning hours & 70 percentage lumen maintenance with CRI greater than 80. Power Input: 220-240V@ 50/60Hz & Power factor greater than 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition.LED light fitting 1 x 4' - 20/22 W (S.R. Electrical Works for 2021-22 Chapter 11, Item No.11.3.2) Each 740.0 740.0 10.0 False None None False None False 7400.0 0 3903716 150465 None 2021-22 Chapter 13, Item No.13.7.1 Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, required Nos of round blocks and clA.On wall/ ceiling / Rafter / Girders S.R. Electrical Works for 2021-22 Chapter 13, Item No.13.7.1) Each 119.0 119.0 12.0 False None None False None False 1428.0 0 3903717 150465 None 2021-22 Chapter 5, Item No.5.7.3 Supplying & fixing of porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers etc., complete. 63 Amps (S.R. Electrical Works for 2021-22 Chapter 5, Item No.5.7.3) Each 372.0 372.0 4.0 False None None False None False 1488.0 0 3903718 150465 None 2021-22 Chapter 5, Item No.5.17.4 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.6 - 32 Amps DP (S.R. Electrical Works for 2021-22 Chapter 5, Item No.5.17.4) Each 1103.0 1103.0 4.0 False None None False None False 4412.0 0 3903719 150465 None 2021-22 Chapter 5, Item No.5.18.10 Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clA, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS enclosure.16 Way SP & N (S.R. Electrical Works for 2021-22 Chapter 5, Item No.5.18.10) Each 2650.0 2650.0 2.0 False None None False None False 5300.0 0 3903720 150465 None 2021-22 Chapter 5, Item No.5.20.1 Supplying, fixing and wiring Earth Leakage Miniature Circuit Breaker ELMCB 240/450V up to 300mA sensitivity on existing wood/panel board.16 - 25 Amps 2 Pole (S.R. Electrical Works for 2021-22 Chapter 5, Item No.5.20.1) Each 2536.0 2536.0 4.0 False None None False None False 10144.0 0 3903721 150465 None 2021-22 Chapter 5, Item No.5.42.2 Fabricating supplying and mounting MS box made out 16 SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clA with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour etc., complete.16 SWG (Box 50 cm X 60 cm X 30 cm) (S.R. Electrical Works for 2021-22 Chapter 5, Item No.5.42.2) Sq CM 0.38 0.38 15000.0 False None None False None False 5700.0 0 3903722 150465 None 2021-22 Chapter 11, Item No.11.11.4 Supplying & fixing of retrofit type - LED bulb ...... W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRIgreater than 70%. efficacy greater than 80 lumen per W, life greater than 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF greater than 0.95, power loss should lesser than 5% of lamp Wage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition.9W, 6500K (S.R. Electrical Works for 2021-22 Chapter 11, Item No.11.11.4) Each 160.0 160.0 8.0 False None None False None False 1280.0 0 3903723 150465 None 2021-22 Chapter 11, Item No.11.11.5 Supplying & fixing of retrofit type - LED bulb ...... W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI greater than 70%. efficacy greater than 80 lumen per W, life greater than 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF greater than 0.95, power loss should lesser than than 5% of lamp Wage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition.12W, 6500K (S.R. Electrical Works for 2021-22 Chapter 11, Item No.11.11.5) Each 237.0 237.0 8.0 False None None False None False 1896.0 0 3903724 150465 None Electricals part III 2021-22, Item No. 32.04 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part- 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 16 Sqmm, 2 Core, (9 GI Strips - 4 x 0.8 mm) (BESCOM Electricals part III 2021-22, Item No. 32.04) Km 114683.0 114683.0 0.1 False None None False None False 11468.3 0 3903725 150465 None BESCOM ESCOM Elec part III 2021-22, Item No. 54.01 Grounding Material Pipe Grounding GI Grounding pipe, B - Class, 42 mm dia, 2.5 Mtr long, 3.2 mm thick with bolt, nut, GI Strips and washer complete Minimum Weight of GI Pipe: 7.3 Kg No 770.0 770.0 2.0 False None None False None False 1540.0 0 3903726 150465 None BESCOM Electrical part III 2021-22, Item No. 54.02 Grounding Material Good Quality well burnt Charcoal for grounding purposes packed in non returnable gunny bag of 30 Kg each No 660.0 660.0 2.0 False None None False None False 1320.0 0 3903727 150465 None BESCOM Electrical part III 2021-22, Item No. 54.03 Grounding Material Good Quality Salt for grounding purposes packed in 50Kg gunny bag Bag 303.0 303.0 2.0 False None None False None False 606.0 0 3903728 150465 None BESCOM Electrical part III 2021-22, Item No. 56.05 LT Single Phase 5-30 Amps, DLMS Complaint Static Energy Meter, 1.0 Accuracy Class (Used for LT-2, LT-3 & LT-5 Installations) No 934.0 934.0 2.0 False None None False None False 1868.0 0 3903729 150465 None 2021-22 Vol. V Page No134 Item No. 1.1 M010A Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for:PVC pipes 25mm dia, 10 kg/sqcm & class 5 (WATER SUPPLY AND SEWERAGE CSR-2021-22 - Vol. V Page No. 134 - Item No. 1.1 / M010A) Mtr 48.41 48.41 50.0 False None None False None False 2420.5 0 3903730 150465 None CSR-2021-22 Vol V Page No. 134 Item No. 1.1 M010B Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for:PVC pipes 32mm dia., 10 kg/sqcm & class 5 (WATER SUPPLY AND SEWERAGE CSR-2021-22 - Vol. V - Page No. 134 - Item No. 1.1 / M010B) Mtr 65.92 65.92 50.0 False None None False None False 3296.0 0 3903731 150465 None 2021-22 Vol. 2 Page No. 115 Item No. 13.1.1 Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete :25 to 40 mm nominal bore Nos 485.13 485.13 16.0 False None None False None False 7762.08 0 3903732 150465 None 2021-22 Vol. 2 Page No. 118 - Item No. 13.18.1. Providing and fixing PTMT stop cock of approved quality and colour 15 mm nominal bore, 86 mm long, weighing not less than 88 g Nos 146.26 146.26 16.0 False None None False None False 2340.16 0 3903733 150465 None 2021-22 Vol. 2 Page No. 118 Item No. 13.18.2. Providing and fixing PTMT stop cock of approved quality and colour 20 mm nominal bore, 86 mm long, Nos 155.53 155.53 16.0 False None None False None False 2488.48 0 3903734 150465 None SR-2021-22 Vol. 2 Page No. 115 Item No. 13.4.1 Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) :25 mm nominal bore Nos 543.84 543.84 4.0 False None None False None False 2175.36 0 3903735 150465 None PWD SR-2021-22 Vol. 2 Page No. 115 Item No. 13.4.2 Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) :32 mm nominal bore Nos 605.85 605.85 4.0 False None None False None False 2423.4 0 3903736 150465 None SR-2021-22 Vol. 2 Page No. 118 Item No. 13.17.1 Providing and fixing PTMT bib cock of approved quality and colour. 15mm nominal bore, 86 mm long, weighing not less than 88 g Nos 152.44 152.44 16.0 False None None False None False 2439.04 0 3903737 150465 None SR-2021-22 Vol. 2 Page No. 115 Item No. 13.5.3 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 25 mm nominal bore Nos 395.52 395.52 12.0 False None None False None False 4746.24 0 3903738 150465 None SR-2021-22 Vol. 2 Page No. 117 Item No. 13.11.2 Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : 20 mm nominal bore Set 450.11 450.11 16.0 False None None False None False 7201.76 0 3903739 150465 None SR-2021-22 Vol. 2 Page No. 115 Item No. 13.6.1.1 Providing and fixing gun metal non- return valve of approved quality (screwed end) : 25 mm nominal bore Horizontal Nos 507.79 507.79 4.0 False None None False None False 2031.16 0 3903740 150465 None 1st corrigendum item No. 13.34 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. Ltr 8.24 8.24 2000.0 False None None False None False 16480.0 0 3903741 150465 None SR-2021-22 Vol. 2 Page No. 125 Item No. 14.7A Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required: using White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer Unit 3706.97 3706.97 4.0 False None None False None False 14827.88 0 3903742 150465 None SR-2021-22 Vol. 4 P. 75, It No 11.50.2 KSRB 12-8.1 : Constructing brick masonary inspection chambr 600 X 600mm, and 450mm depth, (clear inside dimsition) for single pipe line using table moulded non-modular bricks of class designation 50 in cement mortar 1:5, C.I cover with frame (light dur\ty) 600 X 600mm intrnal dimntion, total wt of cover with frame to be not less than 38kg ( wt of cover 23kg wt of frame 15kg ) R.C.C. top slab with cement concteate 1:2:4 mix 20mm and down size granite metal, foundation concrate 1:5:10 40mm and down size granite metal, inside plastering 12mm thick with cement mortar 1:3, finish smooth with a flooting coat of cement on walls and bed concrate complete as per standard design including cost of all materials, labourcharges, curring complete as per specifications. No 9004.26 9004.26 8.0 False None None False None False 72034.08 0 3903743 150465 None SR-2021-22 Vol. 2 Page No. 123 Item No. 14.3.1 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid Each 5155.15 5155.15 12.0 False None None False None False 61861.8 0 3903744 150465 None P. 90, It No 12.113.2 Providing and fixing CI Nahani trap of approved make conforming to ISI specification and construction of Cistern in M-15 as per directions (Rate is inclusive of cost of materials and fixtures and conveyance of materials to work spot) (P. 90, It No 12.113.2) 12.5cms X 7.5cms Unit 293.55 293.55 20.0 False None None False None False 5871.0 0 3903745 150465 None SR-2021-22 Vol. 2 Page No. 117 Item No. 13.10.4 Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : 40 mm nominal bore Unit 414.06 414.06 20.0 False None None False None False 8281.2 0 3903746 150465 None CSR-2021-22 Vol. V Page No. 134 Item No 1.1 M010A Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for: PVC pipes 90mm dia., 6 kg/sqcm & class 3 (WATER SUPPLY AND SEWERAGE CSR-2021-22 - Vol. V - Page No. 134 - Item No. 1.1 / M010A) Rmtr 307.97 307.97 20.0 False None None False None False 6159.4 0 3903747 150465 None CSR-2021-22 Vol. V Page No. 134 Item No. 1.1 M010F Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for: PVC pipes 110mm dia., 6 kg/sqcm & class 3 (WATER SUPPLY AND SEWERAGE CSR-2021-22 - Vol. V - Page No. 134 - Item No. 1.1 / M010F) Rmtr 405.82 405.82 20.0 False None None False None False 8116.4 0 3903748 150465 None PWD SR-2021-22 Vol. 2 Page No. 128 Item No. 14.31 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. Nos 1000.13 1000.13 4.0 False None None False None False 4000.52 0 3903749 150465 None PWD SR-2021-22 Vol. 2 Page No. 124 Item No.14.7.2 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap Nos. 2220.68 2220.68 4.0 False None None False None False 8882.72 0 3903750 150465 None PWD SR-2021-22 Vol. 5 Page No.164 Item No. P440A Supply and delivery of Centrifugal pumpset at site brand new best make and with discharge duty confirming to ISI standards and its latest amendments 2 HP, Size 65x50 Head 13M, Discharge 462 LPM Nos. 15887.75 15887.75 2.0 False None None False None False 31775.5 0 3903751 150465 None PWD SR-2021-22 Vol. 1 Page No. 63 Item No. 2.1.4 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately). Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates Cum 5899.84 5899.84 1.5 False None None False None False 8849.76 0 3903752 150465 None PWD SR-2021-22 Vol. 2 Page No. 13 Item No. 6.2 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. Cum 6896.88 6896.88 7.62 False None None False None False 52554.2256 0 3903753 150465 None PWD SR-2021-22 Vol. 1 Page No. 16 Item No. 2.3.1 Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately)-M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 6638.8 6638.8 0.54 False None None False None False 3584.952 0 3903754 150465 None PWD SR-2021-22 Vol. 2 Page No. 42 Item No. 8.6.1 Providing 12 mm cement plaster with Cement mortar 1:3 (1cement: 3 coarse sand) finished with a floating coat of neat cement to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 282.22 282.22 29.4 False None None False None False 8297.268 0 3903755 150465 None PWD SR-2021-22 Vol. 2 Page No. 134 Item No. 15.6 Providing and laying water proofing treatment to the Water tanks & Liquid Retaining structures with two component acrylic polymer modified cementitious waterproofing membrane with minimum elongation of 50% applied @ 1.5 kg/m2 for internal side waterproofing in two layers with waiting period of 4-6 hrs per layer and food grade epoxy coating in two coats certified by CFTRI Mysuru, including surface preparation completely as per specification & with a 10 years warranty on product & work from certified manufacturers as per the direction of the Engineer In charge. Sqm 468.65 468.65 35.4 False None None False None False 16590.21 0 3903756 150465 None PWD SR-2021-22 Vol. 2 Page No. 43 Item No. 8.12 Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers including cost of material etc as per specifications and as per directions of the Engineerin- Charge. Kg 52.53 52.53 8.0 False None None False None False 420.24 0 3903757 150465 None 2021-22 Vol 5 Pg No. 134 Itm No.1 M010, 1.6 M010F. Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for:PVC pipes 90mm dia., 6 kg/sqcm & class 3 (PWD SR-2021-22 Vol. 5 Page No. 134- Item No.1 SOR Code M010 ,1.6 SOR Code M010F.) Mtr 289.43 289.43 2.4 False None None False None False 694.632 0 3903758 150465 None PWD SR-2021-22 Vol. 1 Page No. 10 Item No. 1.17.1 Earth work excavation for pipeline trenches in all kinds of soils by mechanical means above 600 mm trench width as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricading, caution lights, bracing, using sight rails & boning rods at every 100 mm whevere necessary as directed, removal of stumps and other deleterious matter, dressing of sides and levelling the bottom of trench to the extent required , utilising the available excavated earth locally for the work etc., and all other appurtenances complete in the following strata. All kinds of soils. Depth upto 1.50 m Cum 199.82 199.82 81.0 False None None False None False 16185.42 0 3903759 150465 None SR-2021-22 Vol5 Pg No 184 Item No 2.2 SOR No T040B Supplying lowering laying, jointing, testing and commissioning of following diameters glazed stone ware pipes, conforming to IS 651:1992, (with 5th revision) in all respects jointing with EPDM rubber rings (seals according to EN 681 & ASPM 425) The rubber seals joints pipe will have groves in interior of socket and exterior of the spigot. The rubber gasket shall be prefixed at the factory by the manufacturer rigidly with approved glue to have leak proof joint including conveying of pipe to work site and rolling and lowering into trenches, laying true to line, level and perfect linking at joints testing and commissoning including loading and unloading at both destinations and cuts of pipes wherever necessary including jointing of GSW pipes and specials, with rubber gaskets conforming to EN 681 and ASTM C-425 including cleaning the socket and spigot with soap solution and applying talcum powder for detecting crack, then applying glue and before inserting of rubber gaskets, jacking and fixing in perfect condition including the cost of soap solution, talcum powder and glue etc. and giving necessary hydraulic test to the required pressure of water head with all lead and lifts including costing of jointing materials and all necessary survey works for laying of sewers etc., and disposal of debris as directed etc., complete. (Contractor will make his own arrangements for procuring water for testing) with Rubber ring gasket joints Mtr 526.33 526.33 150.0 False None None False None False 78949.5 0 3903760 150465 None SR-2021-22 Vol5 Pg No 187 Item No. 9 SOR No. T130B Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover.. Each 5126.31 5126.31 4.0 False None None False None False 20505.24 0 3903761 150465 None PWD SR-2021-22 Vol. 1 Page No. 7 Item No. 1.1 Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5 m. Including cost of all labour complete as per specifications Cum 125.66 125.66 81.0 False None None False None False 10178.46 0 1725277007000 1 None None Buildings Construction of Building and Park works for the urban local Body TMC Shikaripura Limits under Amrutha Nagarothana (Municipality) Phase-4 Project (PKS work) 1693025.11 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3903762 150466 None SR-2021-22 Vol. 1 Page No. 8 Item No. 1.12 Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work. Cum 66.95 66.95 14.04 False None None False None False 939.978 0 3903763 150466 None SR-2021-22 - Vol. 1 - Page No. 8 - Item No. 1.15.1 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work - In ordinary/soft rock without blasting upto 1.5 m depth Cum 280.16 280.16 70.2 False None None False None False 19667.232 0 3903764 150466 None SR-2021-22 Vol. 1 Page No 15 Item No. 2.1.3 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Cum 5720.62 5720.62 13.01 False None None False None False 74425.2662 0 3903765 150466 None PWD SR-2021-22 Vol. 1 Page No. 9 Item No. 5.1.1 Providing Random rubble masonry with hard stone in foundationand plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : Cum 4892.5 4892.5 21.84 False None None False None False 106852.2 0 3903766 150466 None PWD SR-2021-22 Vol. 1 Page No. 15 Item No. 2.2.1.1 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement to be paid separately)-M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 6610.99 6610.99 9.9 False None None False None False 65448.801 0 3903767 150466 None SR-2021-22 Vol 1 Page No. 15 Item No 2.2.1.1 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement to be paid separately)-M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 10406.19 10406.19 7.01 False None None False None False 72947.3919 0 3903768 150466 None SR-2021-22 Vol 1 Page No. 15 Item No. 2.2.1.1 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement to be paid separately)-M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 9181.94 9181.94 3.35 False None None False None False 30759.499 0 3903769 150466 None SR-2021-22 Vol. 1 Page No. 17 Item No. 2.5.1 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 10187.94 10187.94 5.33 False None None False None False 54301.7202 0 3903770 150466 None PWD SR-2021-22 Vol. 1 Page No. 17 - Item No. 2.5.1 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 9232.82 9232.82 1.47 False None None False None False 13572.2454 0 3903771 150466 None SR-2021-22 Vol 1 Page No. 17 Item No. 2.5.1 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 9551.19 9551.19 13.95 False None None False None False 133239.1005 0 3903772 150466 None PWD SR-2021-22 Vol. 2 Page No. 84 Item No. 11.32 Providing Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent members whereever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. (The laps and wastages shall not be measured separately) Kg 94.76 94.76 3777.8 False None None False None False 357984.328 0 3903773 150466 None SR-2021-22 Vol 1 Page No. 7 Item No. 1.9 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. Cum 210.12 210.12 49.99 False None None False None False 10503.8988 0 3903774 150466 None PWD SR-2021-22 Vol. 2 - Page No. 14 - Item No.6.8 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. Cum 6890.7 6890.7 13.9 False None None False None False 95780.73 0 3903775 150466 None SR-2021-22 Vol 2 Page No. 41 Item No.8.1.1 Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 219.39 219.39 139.29 False None None False None False 30558.8331 0 3903776 150466 None SR-2021-22 Vol. 2 Page No. 41 Item No.8.2.2 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 236.9 236.9 248.71 False None None False None False 58919.399 0 3903777 150466 None SR-2021-22 Vol 2 Page No. 61 Item No.9.17.2 Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600 x 600 mm Sqm 1135.06 1135.06 172.46 False None None False None False 195752.4476 0 3903778 150466 None PWD SR-2021-22 Vol. 2 Page No 50 Item No. 8.51 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. Sqm 85.49 85.49 386.76 False None None False None False 33064.1124 0 3903779 150466 None PWD SR-2021-22 Vol 2 Page No 45 Item No. 8.25 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 108.15 108.15 191.32 False None None False None False 20691.258 0 3903780 150466 None PWD SR-2021-22 Vol 2 Page No 85 Item No. 11.34A Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding Kg 149.35 149.35 362.88 False None None False None False 54196.128 0 3903781 150466 None SR-2021-22 Vol 2 Page No 48 Item No. 8.40 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 92.7 92.7 17.28 False None None False None False 1601.856 0 3903782 150466 None PWD SR-2021-22 Vol 2 Page No 46 Item No. 8.32 Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 litre/ 10 m2. Over and including priming coat of exterior primer applied @ 0.90 litre/10 m2 with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 115.36 115.36 203.82 False None None False None False 23512.6752 0 3903783 150466 None SR-2021-22 Vol. 2 Page No. 110 Item No.12.84 Providing & fixing of 2-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6 PHR with TPE (Thermo Plastic Elastomer) and lead free, gaskets -grey color having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 44mm width x 40mmheight with reinforcement of 1mm thickness and Sash with overall size of 27mm X 53mm with UPVC honeycomb structure inside in lieu of GI reinforcement. Coextruded Glazing bead for fixing of glass shall be of size 9.5mm x 21.5mm. Windows shall be provided with 5mm plain float glass, standard hardware& single point locking system with Crescent Locks. Wall thickness of frame & sash shall be of 2 mm.Maximum possible size 1219mm x 1219mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) Sqm 4237.42 4237.42 17.28 False None None False None False 73222.6176 0 3903784 150466 None SR-2021-22 Vol. 2 Page No. 105 Item No.12.55 Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Prelaminated PVC C Channel of 5mm thick sheet & 30x50mm wide to form stiles & 5mm thick & 75mm wide Prelaminated PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet Prelaminated on either side fitted in the M.S. frame, Sealed to the stiles & rails with PVC Designer beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75mm Aluminium hinges. with one side prelam Sqm 2941.68 2941.68 5.04 False None None False None False 14826.0672 0 3903785 150466 None for 2021-22 Chapter 1, Item No.1.1.1 Concealed Conduit System Supplying Heavy Gauge PVC Conduit pipe 19/20 mm dia 2mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipes ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary. 19/20 mm dia 2 mm thick (S.R. Electrical Works for 2021-22 Chapter 1, Item No.1.1.1) Mtr 68.0 68.0 100.0 False None None False None False 6800.0 0 3903786 150466 None 2021-22 Chapter - 1. Item No.1.2.2 Concealed Conduit System Supplying Heavy Gauge PVC Conduit pipe 25 mm dia 2mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipes ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary. 25 mm dia 2 mm thick (S.R. Electrical Works for 2021-22 Chapter - 1. Item No.1.2.2) Mtr 70.0 70.0 80.0 False None None False None False 5600.0 0 3903787 150466 None S.R. Electrical 2021-22 Chapter 1, Item No.1.3.1 Concealed conduit System, Supplying Heavy Gauge PVC Conduit Pipe 19/20mm dia 2mm thick with suitable size bends, metal/PVE junction boxes adhesive paste etc., by groove cutting in the wall & fixing by using U or J hooks and cement plastering up to the wall surface and run with 18 SWG GI fish wire run through out the conduit wherever necessary.19/20 mm dia 2 mm thick (S.R. Electrical 2021-22 Chapter 1, Item No.1.3.1) Mtr 75.0 75.0 80.0 False None None False None False 6000.0 0 3903788 150466 None 2021-22 Chapter - 1, Item No.1.3.2 Concealed conduit System, Supplying Heavy Gauge PVC Conduit Pipe 25mm dia 2mm thick with suitable size bends, metal/PVE junction boxes adhesive paste etc., by groove cutting in the wall & fixing by using U or J hooks and cement plastering up to the wall surface and run with 18 SWG GI fish wire run through out the conduit wherever necessary.25 mm dia 2 mm thick (S.R. Electrical Works for 2021-22 Chapter - 1, Item No.1.3.2) Mtr 80.0 80.0 120.0 False None None False None False 9600.0 0 3903789 150466 None 2021-22 Chapter - 1, Item No.1.1.3 Concealed conduit System, Supplying Heavy Gauge PVC Conduit Pipe 32mm dia 2.5 mm thick with Confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosure. Run with 18SWG GI fish wire wherever necessary 32 mm dia 2.5 mm thick (S.R. Electrical Works for 2021-22 Chapter - 1, Item No.1.1.3) Mtr 100.0 100.0 100.0 False None None False None False 10000.0 0 3903790 150466 None 2021-22 Chapter - 3, Item No.3.3.1 Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/NF screws etc., complete.1-3 Way (S.R. Electrical Works for 2021-22 Chapter - 3, Item No.3.3.1) Each 91.0 91.0 8.0 False None None False None False 728.0 0 3903791 150466 None S.R. Electrical 2021-22 Chapter - 3, Item No.3.3.2 Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/NF screws etc., complete.4-5 Way (S.R. Electrical Works for 2021-22 Chapter - 3, Item No.3.3.2) Each 122.0 122.0 8.0 False None None False None False 976.0 0 3903792 150466 None S.R. Electrical 2021-22 Chapter - 3, Item No.3.3.4 Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/NF screws etc., complete.8 Way (S.R. Electrical Works for 2021-22 Chapter - 3, Item No.3.3.4) Each 195.0 195.0 2.0 False None None False None False 390.0 0 3903793 150466 None S.R. Electrical 2021-22 Chapter - 3, Item No.3.5.1 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.1 to 3 Module (S.R. Electrical Works for 2021-22 Chapter - 3, Item No.3.5.1) Each 152.0 152.0 5.0 False None None False None False 760.0 0 3903794 150466 None S.R. Electrical2021-22 Chapter - 3, Item No.3.5.2 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.4 Module (S.R. Electrical Works for 2021-22 Chapter - 3, Item No.3.5.2) Each 175.0 175.0 5.0 False None None False None False 875.0 0 3903795 150466 None S.R. Electrical 2021-22 Chapter - 3, Item No.3.5.4 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.8 Module (S.R. Electrical Works for 2021-22 Chapter - 3, Item No.3.5.4) Each 302.0 302.0 5.0 False None None False None False 1510.0 0 3903796 150466 None S.R. Electrical 2021-22 Chapter - 3, Item No.3.6.1 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6A One Way Switch (S.R. Electrical Works for 2021-22 Chapter - 3, Item No.3.6.1) Each 88.0 88.0 32.0 False None None False None False 2816.0 0 3903797 150466 None S.R. Electrical 2021-22 Chapter - 3, Item No.3.6.2 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6A Two Way Switch (S.R. Electrical Works for 2021-22 Chapter - 3, Item No.3.6.2) Each 152.0 152.0 4.0 False None None False None False 608.0 0 3903798 150466 None S.R. Electrical 2021-22 Chapter - 3, Item No.3.6.3 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6A Three Way socket (S.R. Electrical Works for 2021-22 Chapter - 3, Item No.3.6.3) Each 162.0 162.0 4.0 False None None False None False 648.0 0 3903799 150466 None S.R. Electrical2021-22 Chapter - 3, Item No.3.6.10 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.32A DP Switch (S.R. Electrical Works for 2021-22 Chapter - 3, Item No.3.6.10) Each 375.0 375.0 5.0 False None None False None False 1875.0 0 3903800 150466 None S.R. Electrical2021-22 Chapter - 3, Item No.3.6.11 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6/16A Universal Socket (S.R. Electrical Works for 2021-22 Chapter - 3, Item No.3.6.11) Each 249.0 249.0 5.0 False None None False None False 1245.0 0 3903801 150466 None S.R. Electrical2021-22 Chapter - 2, Item No.2.1.1 Point Wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC conduit / casing capping using 1100V grade, COPPER conductor flexible multi strand FRLS PVC insulated to 2X1.5 Sqmm cabale confirming to the GTP with a 6 Amps flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Short point upto 3 Mtr from tapping point to outlet via switch. (S.R. Electrical Works for 2021-22 Chapter - 2, Item No.2.1.1) Nos 276.0 276.0 12.0 False None None False None False 3312.0 0 3903802 150466 None S.R. Electrical 2021-22 Chapter - 2, Item No.2.1.2 Point Wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC conduit / casing capping using 1100V grade, COPPER conductor flexible multi strand FRLS PVC insulated to 2X1.5 Sqmm cabale confirming to the GTP with a 6 Amps flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Medium point above 3Mtr upto 6Mtr from tapping point to outlet via switch. (S.R. Electrical Works for 2021-22 Chapter - 2, Item No.2.1.2) Nos 386.0 386.0 8.0 False None None False None False 3088.0 0 3903803 150466 None S.R. Electrical 2021-22 Chapter - 2, Item No.2.1.3 Point Wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC conduit / casing capping using 1100V grade, COPPER conductor flexible multi strand FRLS PVC insulated to 2X1.5 Sqmm cabale confirming to the GTP with a 6 Amps flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Long point above 6Mtr up to 10Mtr from tapping point to outlet via switch. (S.R. Electrical Works for 2021-22 Chapter - 2, Item No.2.1.3) Nos 567.0 567.0 4.0 False None None False None False 2268.0 0 3903804 150466 None S.R. Electrical 2021-22 Chapter - 3, Item No.3.1.2 Supplying 6A flush type socket and 6Amps flush type SP switch either surface / flush mounting in existing gang box or in a 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring using necessary capacity wires as required. as per IS 1293 and IS 3654 6 Amps 3/5 way (S.R. Electrical Works for 2021-22 Chapter - 3, Item No.3.1.2) Each 143.0 143.0 4.0 False None None False None False 572.0 0 3903805 150466 None S.R. Ele Works for 2021-22 Chapter 2 Item No.2.3.1 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100v grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694:1990 & confirming to the attached GTP 1 mm2 Mtr 18.0 18.0 120.0 False None None False None False 2160.0 0 3903806 150466 None S.R. Electrical 2021-22 Chapter - 2, Item No.2.3.2 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100v grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694:1990 & confirming to the attached GTP 1.5 mm2 (S.R. Electrical Works for 2021-22 Chapter - 2, Item No.2.3.2) Mtr 26.0 26.0 120.0 False None None False None False 3120.0 0 3903807 150466 None S.R. Electrical 2021-22 Chapter - 2, Item No.2.3.3 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100v grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694:1990 & confirming to the attached GTP 2.5 mm2 (S.R. Electrical Works for 2021-22 Chapter - 2, Item No.2.3.3) Mtr 40.0 40.0 80.0 False None None False None False 3200.0 0 3903808 150466 None S.R. Electrical 2021-22 Chapter - 2, Item No.2.3.4 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100v grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694:1990 & confirming to the attached GTP 4 mm2 (S.R. Electrical Works for 2021-22 Chapter - 2, Item No.2.3.4) Mtr 59.0 59.0 80.0 False None None False None False 4720.0 0 3903809 150466 None S.R. Electrical 2021-22 Item No.6.3.1 Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball bearing system.48" Sweep (1200 mm) Regular model (S.R. Electrical Works for 2021-22 Item No.6.3.1) Each 2085.0 2085.0 6.0 False None None False None False 12510.0 0 3903810 150466 None S.R. Elec 2021-22 Chapter - 11, Item No.11.3.2 Supplying of .4'.feet -PVC Batten with integrated LED tube 20/22 W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than 80. Power Input: 220-240V@ 50/60Hz & Power factor greater than 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition.LED light fitting 1 x 4' - 20/22 W (S.R. Electrical Works for 2021-22 Chapter - 11, Item No.11.3.2) Each 740.0 740.0 10.0 False None None False None False 7400.0 0 3903811 150466 None S.R. Electric 2021-22 Chapter - 13, Item No.13.7.1 Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, required Nos of round blocks and clA.On wall/ ceiling / Rafter / Girders (S.R. Electrical Works for 2021-22 Chapter - 13, Item No.13.7.1) Each 119.0 119.0 10.0 False None None False None False 1190.0 0 3903812 150466 None S.R. Electrical 2021-22 Chapter - 5, Item No.5.7.3 Supplying & fixing of porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers etc., complete. 63 Amps (S.R. Electrical Works for 2021-22 Chapter - 5, Item No.5.7.3) Each 372.0 372.0 6.0 False None None False None False 2232.0 0 3903813 150466 None S.R. Electrical 2021-22 Chapter 5, Item No.5.17.4 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.6 - 32 Amps DP (S.R. Electrical Works for 2021-22 Chapter - 5, Item No.5.17.4) Each 1103.0 1103.0 6.0 False None None False None False 6618.0 0 3903814 150466 None S.R. Electrical 2021-22 Chapter 5, Item No.5.18.10 Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clA, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS enclosure.16 Way SP & N (S.R. Electrical Works for 2021-22 Chapter - 5, Item No.5.18.10) Each 2650.0 2650.0 6.0 False None None False None False 15900.0 0 3903815 150466 None S.R. Electrical 2021-22 Chapter 5, Item No.5.20.1 Supplying, fixing and wiring Earth Leakage Miniature Circuit Breaker [ELMCB] 240/450V up to 300mA sensitivity on existing wood/panel board.16 - 25 Amps 2 Pole (S.R. Electrical Works for 2021-22 Chapter - 5, Item No.5.20.1) Each 2536.0 2536.0 6.0 False None None False None False 15216.0 0 3903816 150466 None S.R. Electrical 2021-22 Chapter 5, Item No.5.42.2 Fabricating supplying and mounting MS box made out 16 SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clA with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour etc., complete.16 SWG (Box 50 cm X 60 cm X 30 cm) (S.R. Electrical Works for 2021-22 Chapter - 5, Item No.5.42.2) Sq CM 0.38 0.38 15500.0 False None None False None False 5890.0 0 3903817 150466 None S.R. Electrica 2021-22 Chapter 11, Item No.11.11.4 Supplying & fixing of retrofit type - LED bulb ...... W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI greater than 70%. efficacy greater than 80 lumen per W, life greater than25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF greater than 0.95, power loss should lesser than 5% of lamp Wage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition.9W, 6500K (S.R. Electrical Works for 2021-22 Chapter - 11, Item No.11.11.4) Each 160.0 160.0 8.0 False None None False None False 1280.0 0 3903818 150466 None Electr Works for 2021-22 Chapter 11, It No.11.11.5 Supplying & fixing of retrofit type - LED bulb ...... W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI greater than 70%. efficacy greater than 80 lumen per W, life greater than 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF greater than 0.95, power loss should less than 5% of lamp Wage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition.12W, 6500K (S.R. Electrical Works for 2021-22 Chapter - 11, Item No.11.11.5) Each 237.0 237.0 8.0 False None None False None False 1896.0 0 3903819 150466 None BESCOM Electrical part III 2021-22, Item No 32.04 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part- 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 16 Sqmm, 2 Core, (9 GI Strips - 4 x 0.8 mm) Km 114683.0 114683.0 0.04 False None None False None False 4587.32 0 3903820 150466 None BESCOM Electrical part III 2021-22, Item No 54.01 Grounding Material Pipe Grounding GI Grounding pipe, B - Class, 42 mm dia, 2.5 Mtr long, 3.2 mm thick with bolt, nut, GI Strips and washer complete Minimum Weight of GI Pipe: 7.3 Kg No 770.0 770.0 1.0 False None None False None False 770.0 0 3903821 150466 None BESCOM Electrical part III 2021-22, Item No 54.02 Grounding Material Good Quality well burnt Charcoal for grounding purposes packed in non returnable gunny bag of 30 Kg each No 660.0 660.0 1.0 False None None False None False 660.0 0 3903822 150466 None BESCOM Electrical part III 2021-22, Item No 54.03 Grounding Material Good Quality Salt for grounding purposes packed in 50Kg gunny bag Bag 303.0 303.0 1.0 False None None False None False 303.0 0 3903823 150466 None BESCOM Electrical part III 2021-22, Item No 56.05 LT Single Phase 5-30 Amps, DLMS Complaint Static Energy Meter, 1.0 Accuracy Class (Used for LT-2, LT-3 & LT-5 Installations) No 934.0 934.0 1.0 False None None False None False 934.0 0
generalCriterionList	createdTs version createdDate modifiedDate criterionType description tenderEligibilityCriterionDocumentList 1725277008000 0 None None ELIGIBILITY Tenders from Joint ventures are not acceptable. None 1725277008000 0 None None ELIGIBILITY Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka None 1725277008000 0 None None ELIGIBILITY Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document. None 1725277008000 0 None None ELIGIBILITY It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission. None 1725277008000 0 None None ELIGIBILITY EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection. None 1725790492000 0 None None ELIGIBILITY Blacklisted agencies/contractors are not eligible to participate in the tender. None 1725790509000 0 None None ELIGIBILITY The work done certificate attached should be issued by an officer not below the rank of Executive Engineer. None 1725790525000 0 None None ELIGIBILITY Conditional LOC (Line of credit)/ Bankers certificate shall not be accepted and the tender bid shall be rejected. None 1725790540000 0 None None ELIGIBILITY Turnover certificate from CA with valid UDIN No. to be furnished along with necessary documents. None 1725790550000 0 None None ELIGIBILITY GST shall be paid to the tendered amount separately. None 1725790564000 0 None None ELIGIBILITY Financial turnover of previous years shall be given a weightage of 10% per year to bring them to the price level of the 2024-25 None 1725790582000 0 None None ELIGIBILITY Tenderers are required to read the Bid Documents carefully before submission of their bid. None 1725871103000 0 None None ELIGIBILITY All conditions as per bid document attached. None
preQualCriterionList	None
technicalCriterionList	createdTs version createdDate modifiedDate description criterionCategoryText criterionTypeOthersValue tenderTechnicalCriterionDocumentList None None None None Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender) None None None None None None Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx) None None None None None None List of existing commitments and ongoing works None None None None None None List of works for which tenders already submitted None None None None None None Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded None None None None None None Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years None None None None None None Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded None None None None None None Each tenderer in its name should have in the last five years i.e., 2019-20 to 2023-24 Executed in any one year for a continuous period of 12 months the following minimum quantities of work, Earthwork excavation/Embankment 1132.00Cum, PCC/RCC/DLC/PQC 192.00Cum, Reinforcement Steel14.00 Tonns, All types of massonry292.00Cum Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None Tenderer in his name should have in the last five years i.e., 2019-20 to 2023-24, satisfactory completed, at least one similar Building work of value not less than Rs. 41.07 Lakhs as prime contractor Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None Bid capacity (AXNX2.5-B) Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- BID Capacity None None None None Company registration certificate. Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Company registration certificate. None None None None Each tenderer in its name should have in the last five years i.e., 2019-20 to 2023-24 Achieved in at least two financial years a minimum annual financial turnover of Rs. 82.14 Lakhs. Financial Status None createdTs version createdDate modifiedDate documentName None None None None Audited CA Certificate of Annual Turnover None None None None Liquid assets and /or availability of credit facilities of no less than Rs. 24.64 Lakhs (estimated cash flow for 3 months of peak construction period (Unconditional Credit lines/ letters of credit/ certificates from banks for meeting the fund requirement etc). Financial Status None createdTs version createdDate modifiedDate documentName None None None None Line of Credit None None None None Banker Details for reference Financial Status None createdTs version createdDate modifiedDate documentName None None None None Line of Credit None None None None List of Financial Resources with Certificates. Financial Status None createdTs version createdDate modifiedDate documentName None None None None Others -- List of Financial Resources with Certificates.
tenderCriterionDocumentList	documentName optional documentTypeText Annual Turnover Certificate True Technical Bid Company Registration Certificate True Technical Bid Credit lines/ letters of credit/ certifcates from banks True Technical Bid Work Done Certifcate True Technical Bid List of existing commitments and ongoing works True Technical Bid
tenderWorkLocationList	tenderSubEstimateName districtName taluqName loksabhaContName assemblyContName locationDescription latitudeDegrees latitudeMinutes latitudeSeconds longitudeDegrees longitudeMinutes longitudeSeconds Buildings Shivamogga Shikaripura Shimoga SHIKARIPUR Shikaripura None None None None None None Buildings Shivamogga Shikaripura Shimoga SHIKARIPUR Shikaripur None None None None None None Buildings Shivamogga Shikaripura Shimoga SHIKARIPUR Shikaripura None None None None None None
tenderAddress	createdTs 1725876798000 version 0 createdDate None modifiedDate None blockNumber District commisioner offce, Savalanga road DC office Shivamogga. street None city Shivamogga state Karnataka pin 577201
tenderRecallDTO	None