createdTs	None
version	None
createdDate	None
modifiedDate	None
noticeInvitingTenderDTO	createdTs 1726038870442 version 7 createdDate None modifiedDate None tenderType RFQ evaluationType TWO_COVER evaluationTypeText Two Cover invitingStrategy OPEN invitingStrategyText Open taxType INCLUSIVE_TAX tenderFee 5000.00 emd 373000.00 bidValueType ITEM_WISE bidValueTypeText Item wise tenderReceiptClose 20-09-2024 16:00:00 tenderQueryClose 17-09-2024 16:00:00 technicalBidOpen 21-09-2024 16:30:00 publishedDate 11-09-2024 18:38:00 publishedByPost PWD_EE_DIV_KPL publishedByUser KPE15981 - P HEMANTHARAJ bidValidityPeriod 90 noOfCalls 1 preBidMeetingDate 17-09-2024 11:00:00 preBidMeetingYn True preQualificationBidOpen None denominationType RUPEES denominationTypeText Rupees retenderedYn None percentageRateTypeText None contactPerson P Hemantaraj splitEmdRequiredYn True emdBankGuarantee 273000.00 emdCash 100000.00 bgValidityPeriod 135 hideWeightage None multipleCurrencySelectionAllowedYn False isTechWeightageAllowed False highestBidderSelection False isVariableEmdAllowed None qcbsTenderYn None itemwiseEmdRequiredYn None sampleSubmissionDate None officeNumber 08539222318 mobileNumber 9448021564 tenderSupplierList None
tenderSchedule	createdTs 1726038870480 version 8 createdDate None modifiedDate None tenderNumber PWD/2024-25/BD/WORK_INDENT11253 title Construction of Inspection bungalow and Commercial complex at Alavandi Village in Koppal Taluka Koppal Constituency . description Construction of Inspection bungalow and Commercial complex at Alavandi Village in Koppal Taluka Koppal Constituency. category WORKS categoryText Works ecv 24845244.96 deptName Public Works Department status PUBLISHED statusText Published remarks None csrValue None ecvtenderYn True location 1696 locationName PWD Division Office Koppala provisionalAmount 30000000.0 groupOverheadTotal 0.0 fileNumber PWD/KPL/4059/2024-25
tenderSubEstimateList	createdTs version createdDate modifiedDate workCategoryName subEstimateName estimateTotal itemList 1726038870000 0 None None Buildings Construction of PWD guest house at Alawandi village (Ground Floor) 11738281.8 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3954600 153238 None Vol-1 Pg. No. 8 It. No. 1.12 of 2023-24 Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work. In all kinds of soils upto 300 mm depth Cum 99.75 99.75 140.4 False None None False None False 14004.9 0 3954601 153238 None Vol-1 Pg. No. 8 It. No. 1.14.1 of 2023-24 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. In all kinds of soils Depth upto 3m Cum 107.1 107.1 460.16 False None None False None False 49283.136 0 3954602 153238 None Vol-2 Pg. No. 5 It. No. 4.1 of 2023-24 Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 l/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications. Sqm 123.9 123.9 508.34 False None None False None False 62983.326 0 3954603 153238 None Vol-1 Pg. No. 15 It. No. 2.1.3 of 2023-24 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates Cum 6288.45 6288.45 90.32 False None None False None False 567972.804 0 3954604 153238 None Vol-1 Pg. No. 15 It. No. 2.2.3 of 2023-24 Providing and laying in position Cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 6652.8 6652.8 83.64 False None None False None False 556440.192 0 3954605 153238 None Vol-1 Pg. No. 111 It. No. 1.a of 2023-24 Additional for formwork, Centering & Scaffolding for Sl No 1 a: Foundation upto plinth Isolated. Cum 532.22 532.22 83.64 False None None False None False 44514.8808 0 3954606 153238 None Vol-1 Pg. No. 16 It. No. 2.3.2 of 2023-24 Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 6804.0 6804.0 10.31 False None None False None False 70149.24 0 3954607 153238 None Vol-1 Pg. No. 111 It. No. 9 of 2023-24 Additional for formwork, Centering & Scaffolding for RCC Columns Cum 4762.8 4762.8 10.31 False None None False None False 49104.468 0 3954608 153238 None Repirt Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 6804.0 6804.0 12.38 False None None False None False 84233.52 0 3954609 153238 None Vol-1 Pg. No. 112 It. No. 11 of 2023-24 Additional for formwork, Centering & Scaffolding for Earth retaining structures Cum 680.4 680.4 12.38 False None None False None False 8423.352 0 3954610 153238 None Vol-1 Pg. No. 7 It. No. 1.9 of 2023-24 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. Cum 279.3 279.3 460.16 False None None False None False 128522.688 0 3954611 153238 None Vol-1 Pg. No. 7 It. No. 1.11 of 2023-24 Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. Cum 454.65 454.65 190.5 False None None False None False 86610.825 0 3954612 153238 None Vol-1 Pg. No. 16 It. No. 2.5.2 of 2023-24 Providing and laying in position Cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. Cum 7185.15 7185.15 172.25 False None None False None False 1237642.0875 0 3954613 153238 None Vol-1 Pg. No. 111 It. No. 9 of 2023-24 Additional for formwork, Centering & Scaffolding for RCC Columns Cum 5029.6 5029.6 18.03 False None None False None False 90683.688 0 3954614 153238 None Vol-1 Pg. No. 111 It. No. 2 of 2023-24 Additional for formwork, Centering & Scaffolding for Plinth beam Cum 3592.57 3592.57 35.58 False None None False None False 127823.6406 0 3954615 153238 None Vol-1 Pg. No. 112 It. No. 14 of 2023-24 Additional for formwork, Centering & Scaffolding for RCC lintels & Beams Cum 4311.09 4311.09 34.86 False None None False None False 150284.5974 0 3954616 153238 None Vol-1 Pg. No. 112 It. No. 19 of 2023-24 Additional for formwork, Centering & Scaffolding for Chejjas, Canopy & Other Architectural projections of minor sections Cum 3233.32 3233.32 2.35 False None None False None False 7598.302 0 3954617 153238 None Vol-1 Pg. No. 112 It. No. 15 of 2023-24 Additional for formwork, Centering & Scaffolding for RCC Roof Slab & Staircase of buildings Cum 3592.57 3592.57 82.43 False None None False None False 296135.5451 0 3954618 153238 None Vol-1 Pg. No. 18 It. No. 2.11.a of 2023-24 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification a. Buildings Tonne 93929.85 93929.85 29.53 False None None False None False 2773748.4705 0 3954619 153238 None Vol-2 Pg. No. 14 It. No. 6.8 of 2023-24 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. Cum 8367.45 8367.45 101.79 False None None False None False 851722.7355 0 3954620 153238 None Vol-2 Pg. No. 14 It. No. 6.14 of 2023-24 Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:3 (1 cement :3 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. Sqm 1113.0 1113.0 31.07 False None None False None False 34580.91 0 3954621 153238 None Vol-1 Pg. No. 16 It. No. 2.4.1 of 2023-24 Providing and laying in position Cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (Mix 1:2:4 (M15) Using 20 mm nominal size graded crushed coarse aggregates Cum 6724.2 6724.2 13.27 False None None False None False 89230.134 0 3954622 153238 None Vol-2 Pg. No. 43 It. No. 8.16.2 of 2023-24 Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. ( length of mesh only be measured for payment plaster mesh 150mm wide m 39.9 39.9 789.2 False None None False None False 31489.08 0 3954623 153238 None Vol-2 Pg. No. 41 It. No. 8.1.2 of 2023-24 Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge Sqm 253.05 253.05 940.15 False None None False None False 237904.9575 0 3954624 153238 None Vol-2 Pg. No. 42 It. No. 8.5.2 of 2023-24 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 366.45 366.45 532.03 False None None False None False 194962.3935 0 3954625 153238 None Vol-2 Pg. No. 44 It. No. 8.16.a of 2023-24 Providing lath plaster with cement mortar 1:3, 5cms thick with 6mm dia mild steel bars at 20 cms. c to c both horizontally and vertically fixing chicken mesh for drop chajja, facia, backing to cup boards including cost of all materials, labour, providing and removing form work HOM of machineries, curing, complete as per specifications. Specification No. KBS padadi works for arches as per design & drawing Sqm 1299.9 1299.9 5.79 False None None False None False 7526.421 0 3954626 153238 None Vol-2 Pg. No. 60 It. No. 9.12.2 of 2023-24 Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete.. Size of Tile 600x600 mm Sqm 1202.25 1202.25 286.89 False None None False None False 344913.5025 0 3954627 153238 None Vol-2 Pg. No. 60 It. No. 9.11 of 2023-24 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete. Sqm 933.45 933.45 31.62 False None None False None False 29515.689 0 3954628 153238 None Vol-2 Pg. No. 65 It. No. 9.39 of 2023-24 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. Sqm 1521.45 1521.45 129.86 False None None False None False 197575.497 0 3954629 153238 None Vol-2 Pg. No. 64 It. No. 9.36 of 2023-24 Providing flooring with 25mm thick polished Cuddapah slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mixed with pigment to match the shade of the slab , including cost of materials, labour, curing, polishing complete as per specifications. Sqm 1732.5 1732.5 30.7 False None None False None False 53187.75 0 3954630 153238 None Vol-2 Pg. No. 63 It. No. 9.24 of 2023-24 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. ** Polished Granite stone slab Black, Cat Eye, River Pink or equivalent. Sqm 2994.6 2994.6 273.15 False None None False None False 817974.99 0 3954631 153238 None Vol-2 Pg. No. 69 It. No. 10.2 of 2023-24 Providing edge moulding to 18mm thick Granite stone counters, vanities etc including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge m 344.4 344.4 294.96 False None None False None False 101584.224 0 3954632 153238 None Vol-2 Pg. No. 99 It. No. 12.12 of 2023-24 Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps ), but including cost of materials, labour, usage charges complete as per specifications. Cum 130412.1 130412.1 1.33 False None None False None False 173448.093 0 3954633 153238 None Vol-2 Pg. No. 104 It. No. 12.51 of 2023-24 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. Nos 1066.8 1066.8 12.0 False None None False None False 12801.6 0 3954634 153238 None Vol-2 Pg. No. 105 It. No. 12.57.5 of 2023-24 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification. -do- 35 mm thick one side teak and one side commercial Sqm 4091.85 4091.85 31.68 False None None False None False 129629.808 0 3954635 153238 None Vol-2 Pg. No. 111 It. No. 12.93.1 of 2023-24 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window Clerestory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for100 g) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 850 kg/m3, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-InCharge. (Fixtures shall be paid for separately) Size 62x100mm m 737.1 737.1 34.2 False None None False None False 25208.82 0 3954636 153238 None Vol-2 Pg. No. 111 It. No. 12.94.1 of 2023-24 Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) having minimum density of 650 kg/m3 and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength of 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws The cost includes cost of materials, transportation, labour and fixing charges. (Cost of Fixtures to be paid separately) 30mm thickness Sqm 3659.25 3659.25 9.45 False None None False None False 34579.9125 0 3954637 153238 None Vol-2 Pg. No. 110 It. No. 12.90 of 2023-24 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size -2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) Sqm 7070.7 7070.7 44.04 False None None False None False 311393.628 0 3954638 153238 None Vol-2 Pg. No. 109 It. No. 12.85 of 2023-24 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size- 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) Sqm 6004.95 6004.95 3.66 False None None False None False 21978.117 0 3954639 153238 None Vol-2 Pg. No. 86 It. No. 11.34B of 2023-24 Providing and fixing M.S. grills of required pattern in frames of win- dows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings / wooden frames with rawl plugs screws etc. Kg 192.15 192.15 1001.7 False None None False None False 192476.655 0 3954640 153238 None Vol-2 Pg. No. 85 It. No. 11.28 of 2023-24 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Kg 593.25 593.25 407.12 False None None False None False 241523.94 0 3954641 153238 None Vol-2 Pg. No. 50 It. No. 8.51 of 2023-24 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. Sqm 105.0 105.0 1429.8 False None None False None False 150129.0 0 3954642 153238 None Vol-2 Pg. No. 46 It. No. 8.33.1 of 2023-24 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 L/10 m² over and including one coat of Special primer applied @ 0.75 L/10 m² with paint of approved quality to give an even shade, afterthoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (The gloss should be 50% @ 60 degree angle with 10 years life). Sqm 165.9 165.9 1429.8 False None None False None False 237203.82 0 3954643 153238 None Vol-2 Pg. No. 46 It. No. 8.32 of 2023-24 Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 litre/ 10 m². Over and including priming coat of exterior primer applied @ 0.90 litre/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 163.8 163.8 532.02 False None None False None False 87144.876 0 3954644 153238 None Vol-2 Pg. No. 46 It. No. 8.33.2 of 2023-24 Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @0.75 ltr/10 m² of approved brand and manufacture to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering and knotting , cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 144.9 144.9 43.09 False None None False None False 6243.741 0 3954645 153238 None Vol-2 Pg. No. 47 It. No. 8.33.3 of 2023-24 Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @ 0.80 ltr/10 m² of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 145.95 145.95 47.7 False None None False None False 6961.815 0 3954646 153238 None Vol-2 Pg. No. 107 It. No. 12.74.1 of 2023-24 Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete : 125x64x1.90mm Nos 107.1 107.1 68.0 False None None False None False 7282.8 0 3954647 153238 None Vol-2 Pg. No. 107 It. No. 12.74.3 of 2023-24 Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete : 75x47x1.80mm Nos 75.6 75.6 18.0 False None None False None False 1360.8 0 3954648 153238 None Vol-2 Pg. No. 108 It. No. 12.60 of 2023-24 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete Nos 1104.6 1104.6 18.0 False None None False None False 19882.8 0 3954649 153238 None Vol-2 Pg. No. 218 It. No. 22.15.7 of 2023-24 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in chargee SS Tower Bolts 250x10mm Nos 210.0 210.0 17.0 False None None False None False 3570.0 0 3954650 153238 None Vol-2 Pg. No. 218 It. No. 22.15.5 of 2023-24 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in chargee SS Tower Bolts 150x10mm Nos 126.0 126.0 6.0 False None None False None False 756.0 0 3954651 153238 None Vol-2 Pg. No. 218 It. No. 22.15.4 of 2023-24 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in chargee SS Aldrop 16mm dia, 300mm Nos 393.75 393.75 24.0 False None None False None False 9450.0 0 3954652 153238 None Vol-2 Pg. No. 218 It. No. 22.15.3 of 2023-24 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in chargee SS Aldrop 16mm dia, 200mm Nos 315.0 315.0 12.0 False None None False None False 3780.0 0 3954653 153238 None Vol-2 Pg. No. 218 It. No. 22.9.a of 2023-24 Providing and fixing stainless steel 304 grade fancy handle of approved make fixed with SS screws etc. complete as per direction of Engineer-incharge. 200mm length Nos 1575.0 1575.0 23.0 False None None False None False 36225.0 0 3954654 153238 None Vol-2 Pg. No. 105 It. No. 12.59 of 2023-24 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. Nos 1169.7 1169.7 17.0 False None None False None False 19884.9 0 3954655 153238 None Vol-2 Pg. No. 72 It. No. 10.20 of 2023-24 Providing and fixing of clay tiles for cladding tiles of size 230x75x10mm thick on 12mm thick cement mortar 1:3 (1 cement : 3 coarse sand) & jointed with Adhesive/cement slurry over rough plaster surface excluding cost of rough plastered surface and the surface is painted with red apex paint and black apex paint into the groves. The work includes cost of all materials, labour charges for all items of work, usage charges for equipment, etc., complete as per specification. Sqm 1997.1 1997.1 8.96 False None None False None False 17894.016 0 3954656 153238 None Vol-2 Pg. No. 45 It. No. 8.29 of 2023-24 Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 L/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 297.15 297.15 18.48 False None None False None False 5491.332 0 3954657 153238 None Vol-2 Pg. No. 54 It. No. 8.80 of 2023-24 Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge: 20 mm to 25 mm wide to required depth. m 69.3 69.3 325.0 False None None False None False 22522.5 0 3954658 153238 None Vol-2 Pg. No. 25 It. No. 7.32.1 of 2023-24 Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 g/m2 (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) : 2011 (Board with BIS Certification marks only) Sqm 1032.15 1032.15 460.85 False None None False None False 475666.3275 0 3954659 153238 None Vol-2 Pg. No. 18 It. No. 6.38 of 2023-24 Fabrication and manufacturing of M35 Grade solid precast concrete element with provisions of shear keys, connecting loops, dowel tubes and proper lifting accessories for walls, beams, slabs, stairs, column etc, of various thickness, shape and size of different concrete grades manufactured in controlled factory environment with approved methodology including moulds (Pallet system, Tilts form, table moulds, battery moulds, vertical moulds, beam moulds, column moulds, staircase moulds, Facade mould, etc.), mixing, transporting and placing of concrete, vibrating, curing, finishing, making necessary cutout/holes of required sizes for services, yard handling & stacking all complete as per IS : 11447:1985 and as per approved shop drawings and design mix as per the direction of Engineerin- Charge (Cost of reinforcement, Mechanical, Electrical and Plumbing inserts will be paid separately). Cum 17879.4 17879.4 4.78 False None None False None False 85463.532 0 1726038871000 0 None None Buildings Construction of PWD guest house at Alwandi village (First Floor) 8673342.25 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3954660 153239 None Vol-1 Pg. No. 16 It. No. 2.5.2 of 2023-24 Providing and laying in position Cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. Cum 7257.0 7257.0 142.26 False None None False None False 1032380.82 0 3954661 153239 None Vol-1 Pg. No. 111 It. No. 9 of 2023-24 Additional for formwork, Centering & Scaffolding for RCC Columns Cum 5079.9 5079.9 19.21 False None None False None False 97584.879 0 3954662 153239 None Vol-1 Pg. No. 112 It. No. 14 of 2023-24 Additional for formwork, Centering & Scaffolding for RCC lintels & Beams Cum 4354.2 4354.2 37.56 False None None False None False 163543.752 0 3954663 153239 None Vol-1 Pg. No. 112 It. No. 19 of 2023-24 Additional for formwork, Centering & Scaffolding for Chejjas, Canopy & Other Architectural projections of minor sections Cum 3265.65 3265.65 1.76 False None None False None False 5747.544 0 3954664 153239 None Vol-1 Pg. No. 112 It. No. 15 of 2023-24 Additional for formwork, Centering & Scaffolding for RCC Roof Slab & Staircase of buildings Cum 3628.5 3628.5 83.85 False None None False None False 304249.725 0 3954665 153239 None Vol-1 Pg. No. 18 It. No. 2.11.a of 2023-24 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification a. Buildings Tonne 94869.15 94869.15 16.73 False None None False None False 1587160.8795 0 3954666 153239 None Vol-2 Pg. No. 14 It. No. 6.8 of 2023-24 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. Cum 8451.12 8451.12 123.21 False None None False None False 1041262.4952 0 3954667 153239 None Vol-2 Pg. No. 14 It. No. 6.14 of 2023-24 Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:3 (1 cement :3 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work Sqm 1124.13 1124.13 36.99 False None None False None False 41581.5687 0 3954668 153239 None Vol-1 Pg. No. 16 It. No. 2.4.1 of 2023-24 Providing and laying in position Cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (Mix 1:2:4 (M15) Using 20 mm nominal size graded crushed coarse aggregates Cum 6791.44 6791.44 4.33 False None None False None False 29406.9352 0 3954669 153239 None Vol-2 Pg. No. 43 It. No. 8.16.2 of 2023-24 Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. ( length of mesh only be measured for payment plaster mesh 150mm wide m 40.3 40.3 789.2 False None None False None False 31804.76 0 3954670 153239 None Vol-2 Pg. No. 41 It. No. 8.1.2 of 2023-24 Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 255.58 255.58 1118.74 False None None False None False 285927.5692 0 3954671 153239 None Vol-2 Pg. No. 42 It. No. 8.5.2 of 2023-24 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 370.11 370.11 467.3 False None None False None False 172952.403 0 3954672 153239 None Vol-2 Pg. No. 44 It. No. 8.16.a of 2023-24 Providing lath plaster with cement mortar 1:3, 5cms thick with 6mm dia mild steel bars at 20 cms. c to c both horizontally and vertically fixing chicken mesh for drop chajja, facia, backing to cup boards including cost of all materials, labour, providing and removing form work HOM of machineries, curing, complete as per specifications. Specification No. KBS padadi works for arches as per design & drawing Sqm 1312.9 1312.9 2.24 False None None False None False 2940.896 0 3954673 153239 None Vol-2 Pg. No. 60 It. No. 9.12.2 of 2023-24 Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete.. Size of Tile 600x600 mm Sqm 1214.27 1214.27 297.04 False None None False None False 360686.7608 0 3954674 153239 None Vol-2 Pg. No. 60 It. No. 9.11 of 2023-24 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete. Sqm 942.78 942.78 31.32 False None None False None False 29527.8696 0 3954675 153239 None Vol-2 Pg. No. 65 It. No. 9.39 of 2023-24 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. Sqm 1536.66 1536.66 102.32 False None None False None False 157231.0512 0 3954676 153239 None Vol-2 Pg. No. 64 It. No. 9.36 of 2023-24 Providing flooring with 25mm thick polished Cuddapah slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mixed with pigment to match the shade of the slab , including cost of materials, labour, curing, polishing complete as per specifications. Sqm 1749.83 1749.83 23.72 False None None False None False 41505.9676 0 3954677 153239 None Vol-2 Pg. No. 63 It. No. 9.24 of 2023-24 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. ** Polished Granite stone slab Black, Cat Eye, River Pink or equivalent. Sqm 3024.55 3024.55 178.03 False None None False None False 538460.6365 0 3954678 153239 None Vol-2 Pg. No. 69 It. No. 10.2 of 2023-24 Providing edge moulding to 18mm thick Granite stone counters, vanities etc including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge m 347.84 347.84 156.18 False None None False None False 54325.6512 0 3954679 153239 None Vol-2 Pg. No. 99 It. No. 12.12 of 2023-24 Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps ), but including cost of materials, labour, usage charges complete as per specifications. Cum 131716.22 131716.22 1.25 False None None False None False 164645.275 0 3954680 153239 None Vol-2 Pg. No. 104 It. No. 12.51 of 2023-24 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. Nos 1077.47 1077.47 12.0 False None None False None False 12929.64 0 3954681 153239 None Vol-2 Pg. No. 105 It. No. 12.57.5 of 2023-24 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification. -do- 35 mm thick one side teak and one side commercial Sqm 4132.77 4132.77 32.88 False None None False None False 135885.4776 0 3954682 153239 None Vol-2 Pg. No. 111 It. No. 12.93.1 of 2023-24 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window Clerestory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for100 g) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 850 kg/m3, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-InCharge. (Fixtures shall be paid for separately) Size 62x100mm m 744.47 744.47 39.9 False None None False None False 29704.353 0 3954683 153239 None Vol-2 Pg. No. 111 It. No. 12.94.1 of 2023-24 Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) having minimum density of 650 kg/m3 and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength of 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws The cost includes cost of materials, transportation, labour and fixing charges. (Cost of Fixtures to be paid separately) 30mm thickness Sqm 3695.84 3695.84 11.02 False None None False None False 40728.1568 0 3954684 153239 None Vol-2 Pg. No. 110 It. No. 12.90 of 2023-24 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size -2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) Sqm 7141.41 7141.41 45.99 False None None False None False 328433.4459 0 3954685 153239 None Vol-2 Pg. No. 109 It. No. 12.85 of 2023-24 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size - 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) Sqm 6065.0 6065.0 2.25 False None None False None False 13646.25 0 3954686 153239 None Vol-2 Pg. No. 86 It. No. 11.34B of 2023-24 Providing and fixing M.S. grills of required pattern in frames of win- dows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings / wooden frames with rawl plugs screws etc. Kg 194.07 194.07 1013.04 False None None False None False 196600.6728 0 3954687 153239 None Vol-2 Pg. No. 85 It. No. 11.28 of 2023-24 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Kg 599.18 599.18 427.28 False None None False None False 256017.6304 0 3954688 153239 None Vol-2 Pg. No. 50 It. No. 8.51 of 2023-24 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. Sqm 106.05 106.05 1640.66 False None None False None False 173991.993 0 3954689 153239 None Vol-2 Pg. No. 46 It. No. 8.33.1 of 2023-24 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 L/10 m² over and including one coat of Special primer applied @ 0.75 L/10 m² with paint of approved quality to give an even shade, afterthoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (The gloss should be 50% @ 60 degree angle with 10 years life). Sqm 167.56 167.56 1640.66 False None None False None False 274908.9896 0 3954690 153239 None Vol-2 Pg. No. 46 It. No. 8.32 of 2023-24 Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 litre/ 10 m². Over and including priming coat of exterior primer applied @ 0.90 litre/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 165.44 165.44 467.29 False None None False None False 77308.4576 0 3954691 153239 None Vol-2 Pg. No. 46 It. No. 8.33.2 of 2023-24 Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @0.75 ltr/10 m² of approved brand and manufacture to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering and knotting , cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 146.35 146.35 38.07 False None None False None False 5571.5445 0 3954692 153239 None Vol-2 Pg. No. 47 It. No. 8.33.3 of 2023-24 Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @ 0.80 ltr/10 m² of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 147.41 147.41 48.24 False None None False None False 7111.0584 0 3954693 153239 None Vol-2 Pg. No. 107 It. No. 12.74.1 of 2023-24 Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete : 125x64x1.90mm. Nos 108.17 108.17 72.0 False None None False None False 7788.24 0 3954694 153239 None Vol-2 Pg. No. 107 It. No. 12.74.3 of 2023-24 Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete : 75x47x1.80mm Nos 76.36 76.36 21.0 False None None False None False 1603.56 0 3954695 153239 None Vol-2 Pg. No. 108 It. No. 12.60 of 2023-24 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete Nos 1115.65 1115.65 11.0 False None None False None False 12272.15 0 3954696 153239 None Vol-2 Pg. No. 218 It. No. 22.15.7 of 2023-24 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in chargee SS Tower Bolts 250x10mm Nos 212.1 212.1 18.0 False None None False None False 3817.8 0 3954697 153239 None Vol-2 Pg. No. 218 It. No. 22.15.5 of 2023-24 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in chargee SS Tower Bolts 150x10mm Nos 127.26 127.26 7.0 False None None False None False 890.82 0 3954698 153239 None Vol-2 Pg. No. 218 It. No. 22.15.4 of 2023-24 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in chargee SS Aldrop 16mm dia, 300mm Nos 397.69 397.69 22.0 False None None False None False 8749.18 0 3954699 153239 None Vol-2 Pg. No. 218 It. No. 22.15.3 of 2023-24 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in chargee SS Aldrop 16mm dia, 200mm Nos 318.15 318.15 14.0 False None None False None False 4454.1 0 3954700 153239 None Vol-2 Pg. No. 218 It. No. 22.9.a of 2023-24 Providing and fixing stainless steel 304 grade fancy handle of approved make fixed with SS screws etc. complete as per direction of Engineer-incharge. 200mm length Nos 1590.75 1590.75 18.0 False None None False None False 28633.5 0 3954701 153239 None Vol-2 Pg. No. 105 It. No. 12.59 of 2023-24 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete Nos 1181.4 1181.4 18.0 False None None False None False 21265.2 0 3954702 153239 None Vol-2 Pg. No. 23 It. No. 7.18 of 2023-24 Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, curing complete as per specifications. Cum 2139.03 2139.03 9.38 False None None False None False 20064.1014 0 3954703 153239 None Vol-2 Pg. No. 72 It. No. 10.20 of 2023-24 Providing and fixing of clay tiles for cladding tiles of size 230x75x10mm thick on 12mm thick cement mortar 1:3 (1 cement : 3 coarse sand) & jointed with Adhesive/cement slurry over rough plaster surface excluding cost of rough plastered surface and the surface is painted with red apex paint and black apex paint into the groves. The work includes cost of all materials, labour charges for all items of work, usage charges for equipment, etc., complete as per specification. Sqm 2017.07 2017.07 8.96 False None None False None False 18072.9472 0 3954704 153239 None Vol-2 Pg. No. 45 It. No. 8.29 of 2023-24 Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 L/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 300.12 300.12 18.48 False None None False None False 5546.2176 0 3954705 153239 None Vol-2 Pg. No. 84 It. No. 11.26.3 of 2023-24 Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. G.I. pipes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Kg 194.07 194.07 333.25 False None None False None False 64673.8275 0 3954706 153239 None Vol-2 Pg. No. 54 It. No. 8.80 of 2023-24 Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge: 20 mm to 25 mm wide to required depth. m 69.99 69.99 325.0 False None None False None False 22746.75 0 3954707 153239 None Vol-2 Pg. No. 25 It. No. 7.32.1 of 2023-24 Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 g/m2 (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) : 2011 (Board with BIS Certification marks only) Sqm 1042.47 1042.47 479.38 False None None False None False 499739.2686 0 3954708 153239 None Vol-2 Pg. No. 82 It. No. 11.16.1 of 2023-24 Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Kg 144.23 144.23 1108.8 False None None False None False 159922.224 0 3954709 153239 None Vol-2 Pg. No. 26 It. No. 7.35 of 2023-24 Providing & fixing on roof pressed clay tile (Mangalore tile) of 20 mm nominal thickness and of approved size and as per approved pattern on steel frame work complete. Sqm 311.79 311.79 50.4 False None None False None False 15714.216 0 3954710 153239 None Vol-2 Pg. No. 18 It. No. 6.38 of 2023-24 Fabrication and manufacturing of M35 Grade solid precast concrete element with provisions of shear keys, connecting loops, dowel tubes and proper lifting accessories for walls, beams, slabs, stairs, column etc, of various thickness, shape and size of different concrete grades manufactured in controlled factory environment with approved methodology including moulds (Pallet system, Tilts form, table moulds, battery moulds, vertical moulds, beam moulds, column moulds, staircase moulds, Facade mould, etc.), mixing, transporting and placing of concrete, vibrating, curing, finishing, making necessary cutout/holes of required sizes for services, yard handling & stacking all complete as per IS : 11447:1985 and as per approved shop drawings and design mix as per the direction of Engineerin- Charge (Cost of reinforcement, Mechanical, Electrical and Plumbing inserts will be paid separately). Cum 18058.19 18058.19 4.52 False None None False None False 81623.0188 0 1726038871000 0 None None Buildings Water supply works 783795.39 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3954711 153240 None Vol-2 Pg. No. 122 It. No. 13.33.3 of 2023-24 Providing and fixing Chorinated poly venyl cloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings,this includes jointing of pipes and fitting with one step CPVC solvent cement,trenching,refilling & testing of joints complete as per direction of Engineer incharge (external work) 25mm nominal OD pipes m 310.8 310.8 250.0 False None None False None False 77700.0 0 3954712 153240 None Vol-2 Pg. No. 123 It. No. 13.33.5 of 2023-24 Providing and fixing Chorinated poly venyl cloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings,this includes jointing of pipes and fitting with one step CPVC solvent cement,trenching,refilling & testing of joints complete as per direction of Engineer incharge (external work) 40mm nominal OD pipes m 500.85 500.85 60.0 False None None False None False 30051.0 0 3954713 153240 None Vol-2 Pg. No. 123 It. No. 13.33.6 of 2023-24 Providing and fixing Chorinated poly venyl cloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings,this includes jointing of pipes and fitting with one step CPVC solvent cement,trenching,refilling & testing of joints complete as per direction of Engineer incharge (external work) 50mm nominal OD pipes m 757.05 757.05 120.0 False None None False None False 90846.0 0 3954714 153240 None Vol-2 Pg. No. 122 It. No. 13.32.2 of 2023-24 Providing and fixing Chorinated poly venyl cloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00 mtr spacing. This includes jointing of pipes and fitting with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer incharge. (Concealed work including cutting chases and good the walls etc.,.) 20mm nominal OD pipes. m 397.95 397.95 200.0 False None None False None False 79590.0 0 3954715 153240 None Vol-2 Pg. No. 122 It. No. 13.32.3 of 2023-24 Providing and fixing Chorinated poly venyl cloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00 mtr spacing. This includes jointing of pipes and fitting with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer incharge. (Concealed work including cutting chases and good the walls etc.,.) 25mm nominal OD pipes m 500.85 500.85 100.0 False None None False None False 50085.0 0 3954716 153240 None Vol-2 Pg. No. 117 It. No. 13.4.1 of 2023-24 Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) : 25 mm nominal bore Each 576.45 576.45 10.0 False None None False None False 5764.5 0 3954717 153240 None Vol-2 Pg. No. 117 It. No. 13.4.3 of 2023-24 Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) : 40 mm nominal bore Each 737.1 737.1 2.0 False None None False None False 1474.2 0 3954718 153240 None Vol-2 Pg. No. 117 It. No. 13.4.4 of 2023-24 Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) : 50 mm nominal bore. Each 897.75 897.75 2.0 False None None False None False 1795.5 0 3954719 153240 None Vol-2 Pg. No. 119 It. No. 13.14 of 2023-24 Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 g Nos 888.3 888.3 16.0 False None None False None False 14212.8 0 3954720 153240 None Vol-2 Pg. No. 140 It. No. 14.60.a of 2023-24 Providing and fixing Single lever wall mixer with L shaped Tubular bend set for overhead shower made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete -Economy Class Nos 4184.25 4184.25 3.0 False None None False None False 12552.75 0 3954721 153240 None Vol-2 Pg. No. 140 It. No. 14.60.b of 2023-24 Providing and fixing Single lever wall mixer with L shaped Tubular bend set for overhead shower made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete -Premium Class Nos 8869.35 8869.35 2.0 False None None False None False 17738.7 0 3954722 153240 None Vol-2 Pg. No. 123 It. No. 13.37 of 2023-24 Cutting holes up to 15x15cm in R.C.C floors and roofs for passing drain pipe etc., and repairing the hole after insertion of drain pipe etc., with cement concrete 1:2:4 (1cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) including finishing complete so as to make it leak proof Nos 328.65 328.65 120.0 False None None False None False 39438.0 0 3954723 153240 None Vol-2 Pg. No. 123 It. No. 13.36 of 2023-24 Cutting holes up to 30x30cm in walls including making good the same with common burnt clay F.P.S (non modular) bricks Each 339.15 339.15 150.0 False None None False None False 50872.5 0 3954724 153240 None Vol-2 Pg. No. 119 It. No. 13.16 of 2023-24 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 Nos 651.0 651.0 45.0 False None None False None False 29295.0 0 3954725 153240 None Vol-2 Pg. No. 145 It. No. 14.95.a of 2023-24 Providing and fixing Bidet spray made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete. Economy Class. Each 880.95 880.95 10.0 False None None False None False 8809.5 0 3954726 153240 None Vol-2 Pg. No. 129 It. No. 13.63 of 2023-24 Providing and fixing PVC (S.W.R) Multi Floor Trap 10.0 cm X 7.5 cm X 5.0 cm X 4.0 cm with all fitting arrangements & all necessary accessories complete Each 256.2 256.2 22.0 False None None False None False 5636.4 0 3954727 153240 None Vol-2 Pg. No. 120 It. No. 13.22.2 of 2023-24 Providing and fixing PTMT grating of approved quality and colour Rectangular type with openable circular lid No 212.1 212.1 22.0 False None None False None False 4666.2 0 3954728 153240 None Vol-5 Pg. No. 113 It. No. 10.1.5 of 2023-24 Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for PVC pipes 75mm dia., 6 kg/sqcm & class 3 m 231.0 231.0 80.0 False None None False None False 18480.0 0 3954729 153240 None Vol-5 Pg. No. 113 It. No. 10.1.7 of 2023-24 Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. PVC pipes 110mm dia., 6 kg/sqcm & class 3 m 431.55 431.55 150.0 False None None False None False 64732.5 0 3954730 153240 None Vol-2 Pg. No. 125 It. No. 13.48 of 2023-24 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring confirming to IS : 5383, leaving 10mm gap for termal expansion (i) single socketed pepes 100mm diameter m 305.55 305.55 128.8 False None None False None False 39354.84 0 3954731 153240 None Vol-2 Pg. No. 123 It. No. 13.34 of 2023-24 Providing and placing on terrace, (at all floor levels) polyethylene water storage tanks IS : 12701 marked with cover and suitable locking arrangements, and making necessary holes for inlet, outlet and over flow pipes, but without fittings and the base support for tank Ltr 9.45 9.45 10000.0 False None None False None False 94500.0 0 3954732 153240 None Vol-5 Pg. No. 247 It. No. 21.1.2 of 2023-24 Water purification plants: Providing, Installation and Commissioning of automatic Water purification plant (RO+UF) with all accessories piping, product water tank on single phase power supply as per the enclosed detailed Technical Specifications including cost of material, loading and unloading and as directed by the Engineer in charge. (Ref- detailed specification enclosed seperatly). Note:- 1.The above rates mentioned are only for the preparation of estimate purpose. 2. All items are to be of BSI /NFS standards,with BSI / NFS mark . 3. Tenders to be invited for procurement. 4. No direct payment should be made under any situation or condition or on any account. 5. After commissioning of plant necessary testing to be done for the satisfactory of Engineer Incharge. Note : Refer the ANNEXURE : F for Detailed Specification of Each components For 50 LPH : Cabin Type Each 46200.0 46200.0 1.0 False None None False None False 46200.0 0 1726038871000 0 None None Buildings Sanitary works 634571.7 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3954733 153241 None Vol-1 Pg. No. 10 It. No. 1.17.1 of 2023-24 Earth work excavation for pipeline trenches in all kinds of soils by mechanical means above 600 mm trench width as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricading, caution lights, bracing, using sight rails & boning rods at every 100 mm whevere necessary as directed, removal of stumps and other deleterious matter, dressing of sides and levelling the bottom of trench to the extent required , utilising the available excavated earth locally for the work etc., and all other appurtenances complete in the following strata All kinds of soils. Depth upto 1.50 m Cum 275.1 275.1 139.5 False None None False None False 38376.45 0 3954734 153241 None Vol-1 Pg. No. 7 It. No. 1.10 of 2023-24 Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5 m. Including cost of all labour complete as per specifications Cum 168.0 168.0 115.2 False None None False None False 19353.6 0 3954735 153241 None Vol-5 Pg. No. 96 It. No. 9.2.6 of 2023-24 Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and rolling and lowering into trenches, laying true to line and jointing of pipes and specials with electrofusion welding, giving hydraulic test as per relevant ISS with all lead and lifts including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excation, testing and commissioning. The rate is exclusive of required specials and fittings wherever necessary like saddle Tee, stub ends, flanged sets, bedns, reducers etc. complete (Contractor will make his own arrangements for procuring water for testing) etc. Note: Upto 110mm dia Coil shall be used. For Grade PE80 PN8.0 : HDPE Grade PE80-PN8.0,140mm dia m 934.5 934.5 30.0 False None None False None False 28035.0 0 3954736 153241 None Vol-5 Pg. No. 96 It. No. 9.2.9 of 2023-24 Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and rolling and lowering into trenches, laying true to line and jointing of pipes and specials with electrofusion welding, giving hydraulic test as per relevant ISS with all lead and lifts including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excation, testing and commissioning. The rate is exclusive of required specials and fittings wherever necessary like saddle Tee, stub ends, flanged sets, bedns, reducers etc. complete (Contractor will make his own arrangements for procuring water for testing) etc. Note: Upto 110mm dia Coil shall be used. For Grade PE80 PN8.0 : HDPE Grade PE80-PN8.0,200mm dia m 1803.9 1803.9 120.0 False None None False None False 216468.0 0 3954737 153241 None Vol-2 Pg. No. 131 It. No. 14.3.1 of 2023-24 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid Each 6275.85 6275.85 9.0 False None None False None False 56482.65 0 3954738 153241 None Vol-2 Pg. No. 131 It. No. 14.1.1 of 2023-24 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests Each 5128.2 5128.2 1.0 False None None False None False 5128.2 0 3954739 153241 None Vol-2 Pg. No. 132 It. No. 14.7.1 of 2023-24 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps Each 3236.1 3236.1 15.0 False None None False None False 48541.5 0 3954740 153241 None Vol-2 Pg. No. 137 It. No. 14.40.2 of 2023-24 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g. Each 520.8 520.8 15.0 False None None False None False 7812.0 0 3954741 153241 None Vol-2 Pg. No. 136 It. No. 14.32.4 of 2023-24 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular shape 1500x450 mm Each 1812.3 1812.3 3.0 False None None False None False 5436.9 0 3954742 153241 None Vol-2 Pg. No. 136 It. No. 14.32.2 of 2023-24 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular shape 457x357 mm Each 1068.9 1068.9 8.0 False None None False None False 8551.2 0 3954743 153241 None Vol-2 Pg. No. 131 It. No. 14.4.1 of 2023-24 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flushpipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required One urinal basin with 5 litre white P.V.C. automatic flushing cistern Each 4676.7 4676.7 1.0 False None None False None False 4676.7 0 3954744 153241 None Vol-2 Pg. No. 124 It. No. 13.40 of 2023-24 Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover 180 x 150 mm size P type & With Non Modular common burnt clay bricks of designation 3.5 & frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design Each 2820.3 2820.3 8.0 False None None False None False 22562.4 0 3954745 153241 None Vol-2 Pg. No. 136 It. No. 14.29 of 2023-24 Providing and fixing 100 mm sand cast Iron grating for gully trap Each 49.35 49.35 8.0 False None None False None False 394.8 0 3954746 153241 None Vol-5 Pg. No. 191 It. No. 16.9 of 2023-24 Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover. Each 5726.7 5726.7 18.0 False None None False None False 103080.6 0 3954747 153241 None Vol-5 Pg. No. 196 It. No. 16.23.1 of 2023-24 Supplying and fixing SFRC frame and cover conforming to IS 12592 (part-I)-1988 and IS 12592 (part-II)- 1991 with latest amendment, including cutting slabs to the required size for the opening and fixing the cover in C.C. 1:2:4 and C.M. 1:3 plastering 20 mm thick to all exposed faces, curing for 10 days with all lead and lift with appurtenances. complete Medium Duty. Each 2009.7 2009.7 26.0 False None None False None False 52252.2 0 3954748 153241 None Vol-2 Pg. No. 69 It. No. 10.4 of 2023-24 Extra for providing opening of required size & shape for wash basin/kitchen sink in kitchen platform, vanity counter and similar location in Granite, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. Each 620.55 620.55 3.0 False None None False None False 1861.65 0 3954749 153241 None Vol-2 Pg. No. 133 It. No. 14.10.1.3 of 2023-24 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :Kitchen sink with drain board 510x1040 mm bowl depth 200 mm. Each 5185.95 5185.95 3.0 False None None False None False 15557.85 0 1726038871000 0 None None Buildings Bore Well (1nos) 304439.1 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3954750 153242 None Vol-5 Pg. No. 140 It. No. 12.4 of 2023-24 Geophysical investigation at site for sinking borewells for supplying drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical sounding by adopting Venner or Schlumbergers’s method, including reconnaissance survey of geological formation. Geophysical investigation of existing ground water in the vicinity, its quality, quantity and acceptability of the users, indicating the location of the site, r commended depth of casing pipe required to seal the top unconsolidated formation including an extra depth of 1.0 metre in consolidated formation for proper seating of casing pipe, depth of drilling required to cover full depth of aquifer proposed to be tapped, probable yield and other information required including transportation of instruments and accessories to work site, engaging technical personal and labour required etc. NOTE: 1) Additional rate on item 1&2 is allowed fo drilling in over burden and fixing Casing pipes beyond 20 M (for fixing Casing pipes only) a) Above 20 M and upto 30 M - 15%, b) Above 30 M - 30% (Measurement of overburden is restricted to the depth of casing pipe fixed excluding initial depth of 20M and projection above ground level). 2) A sum of Rs. 100/- is to be deducted for Dry Borewell towards yield test Each 5552.4 5552.4 1.0 False None None False None False 5552.4 0 3954751 153242 None Vol-5 Pg. No. 139 It. No. 12.1.1 of 2023-24 Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete ) 0-50 Mtrs. Rmtr 388.5 388.5 50.0 False None None False None False 19425.0 0 3954752 153242 None Vol-5 Pg. No. 139 It. No. 12.1.2 of 2023-24 Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete ) 50-100Mtrs Rmtr 487.2 487.2 50.0 False None None False None False 24360.0 0 3954753 153242 None Vol-5 Pg. No. 139 It. No. 12.1.3 of 2023-24 Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete ) 100-150 Mtrs. Rmtr 517.65 517.65 10.0 False None None False None False 5176.5 0 3954754 153242 None Vol-5 Pg. No. 143 It. No. 12.32 of 2023-24 Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and latest ammendments, electrical resistance welded steel tubes, material and conforming to IS 1387-1993 and manufactured by basic open hearth electric or basic oxygen process in random length of 5-7m both ends.threaded conforming to IS 554-1985 one end fixed with socket conforming to IS 4270-2001 and the other end with screwed pipes all shall be responsibaly free from defects. The tubes shall be responsible straight end should be with ISI marking weighing 25.10kg/m.prices include Collar-Medium duty. Rmtr 2029.65 2029.65 50.0 False None None False None False 101482.5 0 3954755 153242 None Vol-5 Pg. No. 155 It. No. 13.28 of 2023-24 Supply and delivery at site 50mm(2”) dia heavy duty unplasticized PVC Column pipes with heavy duty collars,rubber profile ring,vibration control profile ring,freezing and turbulence free leak proof EPDM ring with ISI mark with its latest amendments m 577.5 577.5 90.0 False None None False None False 51975.0 0 3954756 153242 None Vol-5 Pg. No. 152 It. No. 13.15.7 of 2023-24 Providing,supplying to work site, Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications,as per necessary ammendments and instructions of engineer incharge of work. For 7.50 HP - 90 LPM @ 165 m = 15 STG Outlet Dia - 2.00” Each 42850.5 42850.5 1.0 False None None False None False 42850.5 0 3954757 153242 None Vol-5 Pg. No. 156 It. No. 13.32 of 2023-24 Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well caps, cable clips and water tight gland cable protectors, bolts, nuts, valve and gauges,tools and equipments etc., involved in the job as per specifications, with necessary tests as per specifications, with testing of as per instructions of engineer incharge of work. Job 6825.0 6825.0 1.0 False None None False None False 6825.0 0 3954758 153242 None Vol-5 Pg. No. 143 It. No. 12.33 of 2023-24 Providing and fixing MS casing collars as per IS 1239 (part-II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum). The dimensions of caps and colars shall be strictly as per IS 1239 (Part-II) 1982 with all amendments Each 157.5 157.5 1.0 False None None False None False 157.5 0 3954759 153242 None Vol-5 Pg. No. 143 It. No. 12.34 of 2023-24 Providing and laying at site of work MS casing caps as per IS 1239 (part- II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum). The dimensions of caps and colars shall be strictly as per IS 1239 (Part-II) 1982 with all amendments including cost of material and labour charges for fixing, if any etc. complete with all lead and lifts and as directed by the Engineer in charge Each 172.2 172.2 1.0 False None None False None False 172.2 0 3954760 153242 None Vol-5 Pg. No. 155 It. No. 13.29 of 2023-24 Supply and delivery at site 50mm(2”) dia heavy duty CI adopter set complete suitable for uPVC Column pipes for Submersible pumpsets Set 1627.5 1627.5 1.0 False None None False None False 1627.5 0 3954761 153242 None Vol-6 Pg. No. 7 It. No. 2.6.3 of 2023-24 Supplying and drawing 3 core flat PVC sheathed submersible pump cable manufactured with electrolytic grade copper with flexible copper with low resistance conductor confirming to13:8130-1984 and virgin grade PVC insulation and powder coating extruded PVC sheathed suitable for working voltage upto 1100 Volts as per IS-694:1990. 3C X 6Sq.mm m 257.25 257.25 90.0 False None None False None False 23152.5 0 3954762 153242 None Vol-5 Pg. No. 155 It. No. 13.24.3 of 2023-24 Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog Voltmeter 1ni with Phase selector switch, Isolating switch OUTGOING for Main Electrical Pump: 1 No. MCB 1 No. DOL of S/D Starter suitable for respective HP 1 No. Electrcal Protection Like single Phase preventor, under voltage over Volage, under current over current & dry run protection suitable for the pump described above 1 no Indoor type NOTE: 1) DOL- Direct Online Starter 2) S-D- Star Delta Starter etc. complete. for outdoor 6 to 15 HP pumps Each 18375.0 18375.0 1.0 False None None False None False 18375.0 0 3954763 153242 None Vol-5 Pg. No. 156 It. No. 13.34 of 2023-24 Labour charges for erection of outdoor type panel board and meter board units with all necessary materials and labour, tools and equipments including providing cement concrete foundation bed etc., complete as per specification, with testing of as per instructions of engineer incharge of work Job 1522.5 1522.5 1.0 False None None False None False 1522.5 0 3954764 153242 None Vol-5 Pg. No. 155 It. No. 13.26 of 2023-24 Supply and delivery at site delivery of best indigenous brand new MCB (Miniature Circuit Breakers) of required capacity as per IS 88228/1978 and its latest amendments and with ISI Mark of 6/10/16/20/25/40 Amps with scalable box. Per 3 Poles 1207.5 1207.5 1.0 False None None False None False 1207.5 0 3954765 153242 None Vol-5 Pg. No. 155 It. No. 13.25 of 2023-24 Supply and delivery at site best indigenous brand new power capacitor as per IS 2834/1986 with latest amendments with KPTCL authorities and erection, electrification and commissioning of the same at the location of respective pump sets. Kvar 577.5 577.5 1.0 False None None False None False 577.5 0 1726038871000 0 None None Buildings Internal Electrical works 1943245.42 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3954766 153243 None Vol-6 Pg. No. 2 It. No. 1.2.1 of 2023-24 Concealed conduit system :supplying……mm dia 2mm 2.5mm thick heavy guage PVC conduit pipe with suitable size bends, metal/PVC junction boxes adhesive pasteetc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused wires and unused junction boxes and pipe ends should be covered using PVC end enclosers. Run with 18 SWG GI fish wire wherever necessary a) 19/20mm dia 2mm thick Mtr 69.3 69.3 1400.0 False None None False None False 97020.0 0 3954767 153243 None Vol-6 Pg. No. 2 It. No. 1.2.2 of 2023-24 Concealed conduit system :supplying……mm dia 2mm 2.5mm thick heavy guage PVC conduit pipe with suitable size bends, metal/PVC junction boxes adhesive pasteetc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused wires and unused junction boxes and pipe ends should be covered using PVC end enclosers. Run with 18 SWG GI fish wire wherever necessary b) 25mm dia 2mm thick Mtr 81.9 81.9 1000.0 False None None False None False 81900.0 0 3954768 153243 None Vol-6 Pg. No. 2 It. No. 1.3.1 of 2023-24 Groove cutting : supplying…….dia 2mm/2.5mm thick heavy guage PVC conduit pipe with bends, metal junction boxes adhesive paste etc., and bracing U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary. a) 19/20mm dia 2mm thick Mtr 71.4 71.4 350.0 False None None False None False 24990.0 0 3954769 153243 None Vol-6 Pg. No. 2 It. No. 1.3.2 of 2023-24 Groove cutting : supplying…….dia 2mm/2.5mm thick heavy guage PVC conduit pipe with bends, metal junction boxes adhesive paste etc., and bracing U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary. b) 25mm dia 2mm thick Mtr 82.95 82.95 250.0 False None None False None False 20737.5 0 3954770 153243 None Vol-6 Pg. No. 5 It. No. 2.2.1 of 2023-24 Point wiring using copper wire without switch. Supplying and wiring adopting loop system in existin PVC conduit /casing caping using copper PVC insulated multi strand 2x1.5Sqmm copper wire without switch, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block.complete outlet. Short point upto 3Mtr from tapping point to outlet via switch box Point 282.45 282.45 50.0 False None None False None False 14122.5 0 3954771 153243 None Vol-6 Pg. No. 5 It. No. 2.2.2 of 2023-24 Point wiring using copper wire without switch. Supplying and wiring adopting loop system in existin PVC conduit /casing caping using copper PVC insulated multi strand 2x1.5Sqmm copper wire without switch, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block.complete outlet. medium point above 3Mtr upto 6Mtr from tapping point outlet via switch box Point 397.95 397.95 130.0 False None None False None False 51733.5 0 3954772 153243 None Vol-6 Pg. No. 5 It. No. 2.2.3 of 2023-24 Point wiring using copper wire without switch. Supplying and wiring adopting loop system in existin PVC conduit /casing caping using copper PVC insulated multi strand 2x1.5Sqmm copper wire without switch, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block.complete outlet. long point above 6Mtr upto 10Mtr tapping point to outlet via switch box Point 582.75 582.75 200.0 False None None False None False 116550.0 0 3954773 153243 None Vol-6 Pg. No. 5 It. No. 2.2.4 of 2023-24 Point wiring using copper wire without switch. Supplying and wiring adopting loop system in existin PVC conduit /casing caping using copper PVC insulated multi strand 2x1.5Sqmm copper wire without switch, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block.complete outlet. long Two outlet in a row, above 3 Mtr upto 6Mtr from tapping point to outlet let via switches 2.3.4 Point 710.85 710.85 4.0 False None None False None False 2843.4 0 3954774 153243 None Vol-6 Pg. No. 8 It. No. 3.4.2 of 2023-24 Supplying and flush mounting powder coated metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in brick/stone /c.c wall 3 way Each 166.95 166.95 25.0 False None None False None False 4173.75 0 3954775 153243 None Vol-6 Pg. No. 8 It. No. 3.4.3 of 2023-24 Supplying and flush mounting powder coated metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in brick/stone /c.c wall 4-5 way Each 185.85 185.85 12.0 False None None False None False 2230.2 0 3954776 153243 None Vol-6 Pg. No. 8 It. No. 3.4.4 of 2023-24 Supplying and flush mounting powder coated metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in brick/stone /c.c wall 6 way Each 231.0 231.0 10.0 False None None False None False 2310.0 0 3954777 153243 None Vol-6 Pg. No. 8 It. No. 3.4.5 of 2023-24 Supplying and flush mounting powder coated metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in brick/stone /c.c wall 8 way Each 274.05 274.05 24.0 False None None False None False 6577.2 0 3954778 153243 None Vol-6 Pg. No. 8 It. No. 3.4.6 of 2023-24 Supplying and flush mounting powder coated metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in brick/stone /c.c wall 10-12 way Each 334.95 334.95 30.0 False None None False None False 10048.5 0 3954779 153243 None Vol-6 Pg. No. 8 It. No. 3.4.7 of 2023-24 Supplying and flush mounting powder coated metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in brick/stone /c.c wall 16 way Each 381.15 381.15 28.0 False None None False None False 10672.2 0 3954780 153243 None Vol-6 Pg. No. 8 It. No. 3.5.2 of 2023-24 Supplying and fixing superior quality modular switch mounting poly carbonate plate with necessary supporting back plate with required nos. of machine screws, bolts, nuts etc., complete on the existing metal/PVC box. 3 module Each 169.05 169.05 25.0 False None None False None False 4226.25 0 3954781 153243 None Vol-6 Pg. No. 8 It. No. 3.5.3 of 2023-24 Supplying and fixing superior quality modular switch mounting poly carbonate plate with necessary supporting back plate with required nos. of machine screws, bolts, nuts etc., complete on the existing metal/PVC box. 4 module Each 183.75 183.75 12.0 False None None False None False 2205.0 0 3954782 153243 None Vol-6 Pg. No. 8 It. No. 3.5.4 of 2023-24 Supplying and fixing superior quality modular switch mounting poly carbonate plate with necessary supporting back plate with required nos. of machine screws, bolts, nuts etc., complete on the existing metal/PVC box. 6 module Each 245.7 245.7 10.0 False None None False None False 2457.0 0 3954783 153243 None Vol-6 Pg. No. 8 It. No. 3.5.5 of 2023-24 Supplying and fixing superior quality modular switch mounting poly carbonate plate with necessary supporting back plate with required nos. of machine screws, bolts, nuts etc., complete on the existing metal/PVC box. 8 module Each 298.2 298.2 24.0 False None None False None False 7156.8 0 3954784 153243 None Vol-6 Pg. No. 8 It. No. 3.5.6 of 2023-24 Supplying and fixing superior quality modular switch mounting poly carbonate plate with necessary supporting back plate with required nos. of machine screws, bolts, nuts etc., complete on the existing metal/PVC box. 10-12 module Each 361.2 361.2 30.0 False None None False None False 10836.0 0 3954785 153243 None Vol-6 Pg. No. 9 It. No. 3.5.7 of 2023-24 Supplying and fixing superior quality modular switch mounting poly carbonate plate with necessary supporting back plate with required nos. of machine screws, bolts, nuts etc., complete on the existing metal/PVC box. 16 Module Each 416.85 416.85 28.0 False None None False None False 11671.8 0 3954786 153243 None Vol-6 Pg. No. 9 It. No. 3.6.1 of 2023-24 Supplying and fixing of modular switch/socket /stepped electronic fan regulator/dimmer/telephone socket etc on excistin modular switch plate. Using group 'A' materials 6Amps one way Each 107.1 107.1 410.0 False None None False None False 43911.0 0 3954787 153243 None Vol-6 Pg. No. 9 It. No. 3.6.2 of 2023-24 Supplying and fixing of modular switch/socket /stepped electronic fan regulator/dimmer/telephone socket etc on excistin modular switch plate. Using group 'A' materials 6Amps 2 way Each 174.3 174.3 30.0 False None None False None False 5229.0 0 3954788 153243 None Vol-6 Pg. No. 9 It. No. 3.6.3 of 2023-24 Supplying and fixing of modular switch/socket /stepped electronic fan regulator/dimmer/telephone socket etc on excistin modular switch plate. Using group 'A' materials 6Amps 3 way socket Each 179.55 179.55 110.0 False None None False None False 19750.5 0 3954789 153243 None Vol-6 Pg. No. 9 It. No. 3.6.4 of 2023-24 Supplying and fixing of modular switch/socket /stepped electronic fan regulator/dimmer/telephone socket etc on excistin modular switch plate. Using group 'A' materials Stepped fan regulator Each 374.85 374.85 36.0 False None None False None False 13494.6 0 3954790 153243 None Vol-6 Pg. No. 9 It. No. 3.6.7 of 2023-24 Supplying and fixing of modular switch/socket /stepped electronic fan regulator/dimmer/telephone socket etc on excistin modular switch plate. Using group 'A' materials 16Amps 1 way switch Each 189.0 189.0 15.0 False None None False None False 2835.0 0 3954791 153243 None Vol-6 Pg. No. 9 It. No. 3.6.10 of 2023-24 Supplying and fixing of modular switch/socket /stepped electronic fan regulator/dimmer/telephone socket etc on excistin modular switch plate. Using group 'A' materials 32Amps DP switch Each 342.3 342.3 2.0 False None None False None False 684.6 0 3954792 153243 None Vol-6 Pg. No. 9 It. No. 3.6.11 of 2023-24 Supplying and fixing of modular switch/socket /stepped electronic fan regulator/dimmer/telephone socket etc on excistin modular switch plate. Using group 'A' materials 6/16Amps universal socket Each 247.8 247.8 15.0 False None None False None False 3717.0 0 3954793 153243 None Vol-6 Pg. No. 9 It. No. 3.6.12 of 2023-24 Supplying and fixing of modular switch/socket /stepped electronic fan regulator/dimmer/telephone socket etc on excistin modular switch plate. Using group 'A' materials TV/Telephone socket Each 163.8 163.8 10.0 False None None False None False 1638.0 0 3954794 153243 None Vol-6 Pg. No. 9 It. No. 3.6.13 of 2023-24 Supplying and fixing of modular switch/socket /stepped electronic fan regulator/dimmer/telephone socket etc on excistin modular switch plate. Using group 'A' materials RJ45/I.O outlet Each 353.85 353.85 10.0 False None None False None False 3538.5 0 3954795 153243 None Vol-6 Pg. No. 5 It. No. 2.3.2 of 2023-24 Wiring for lighting or power circuit using one of FRLS PVC insulated 1100v grade,multis and copper with low conductor resistance single core wire in open or consealed system of wiring with specified IS-694:1990 & confirming to GTP Group 'A' material 1.5 Sqmm Mtr 27.3 27.3 1000.0 False None None False None False 27300.0 0 3954796 153243 None Vol-6 Pg. No. 5 It. No. 2.3.3 of 2023-24 Wiring for lighting or power circuit using one of FRLS PVC insulated 1100v grade,multis and copper with low conductor resistance single core wire in open or consealed system of wiring with specified IS-694:1990 & confirming to GTP Group 'A' material 2.5 Sqmm Mtr 44.1 44.1 1850.0 False None None False None False 81585.0 0 3954797 153243 None Vol-6 Pg. No. 5 It. No. 2.3.4 of 2023-24 Wiring for lighting or power circuit using one of FRLS PVC insulated 1100v grade,multis and copper with low conductor resistance single core wire in open or consealed system of wiring with specified IS-694:1990 & confirming to GTP Group 'A' material 4 Sqmm Mtr 66.15 66.15 600.0 False None None False None False 39690.0 0 3954798 153243 None Vol-6 Pg. No. 5 It. No. 2.3.5 of 2023-24 Wiring for lighting or power circuit using one of FRLS PVC insulated 1100v grade,multis and copper with low conductor resistance single core wire in open or consealed system of wiring with specified IS-694:1990 & confirming to GTP Group 'A' material 6 Sqmm Mtr 96.6 96.6 400.0 False None None False None False 38640.0 0 3954799 153243 None Vol-6 Pg. No. 5 It. No. 2.3.6 of 2023-24 Wiring for lighting or power circuit using one of FRLS PVC insulated 1100v grade,multis and copper with low conductor resistance single core wire in open or consealed system of wiring with specified IS-694:1990 & confirming to GTP Group 'A' material 10 Sqmm Mtr 175.35 175.35 100.0 False None None False None False 17535.0 0 3954800 153243 None Vol-6 Pg. No. 18 It. No. 5.19.12 of 2023-24 Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase / 3 phase / single door with powder coated painting. Made out of 14 SWG MS enclosure.III - Double Door 6Way TP &N Each 5187.0 5187.0 4.0 False None None False None False 20748.0 0 3954801 153243 None Vol-6 Pg. No. 17 It. No. 5.18.1 of 2023-24 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 6-32 amps SP Each 435.75 435.75 30.0 False None None False None False 13072.5 0 3954802 153243 None Vol-6 Pg. No. 17 It. No. 5.18.4 of 2023-24 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 6-32 amps DP No 6.16.3 Each 775.95 775.95 16.0 False None None False None False 12415.2 0 3954803 153243 None Vol-6 Pg. No. 18 It. No. 5.20.10 of 2023-24 Supplying, fixing and wiring Residual currrent circuit breaker (RCCB) 240/450V up to 300mA sensitivity on existing wood/panel board. 63 Amps 4 pole Each 5822.25 5822.25 4.0 False None None False None False 23289.0 0 3954804 153243 None Vol-6 Pg. No. 54 It. No. 12.56 of 2023-24 Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit … The pit should be filled with equal proportion of salt and charcoal 150mm all-round the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI wire of size as per ISI specification 7.3.3. of IS 732 using 12mm dia bolts, nuts, washers and check nuts etc., the pipe shall have 16 through holes of 12 mm dia Nos 3685.5 3685.5 4.0 False None None False None False 14742.0 0 3954805 153243 None Vol-6 Pg. No. 54 It. No. 12.58.3 of 2023-24 Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 25x6mm GI Strip Mtr 134.4 134.4 50.0 False None None False None False 6720.0 0 3954806 153243 None Vol-6 Pg. No. 55 It. No. 12.58.7 of 2023-24 Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 25x3mm Copper Strip Mtr 598.5 598.5 50.0 False None None False None False 29925.0 0 3954807 153243 None Vol-6 Pg. No. 43 It. No. 11.3.3 of 2023-24 Supplying of PVC Batten with integrated LED tube LED light fighting 1 x4'- 36/40 w with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V @ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. Each 1332.45 1332.45 12.0 False None None False None False 15989.4 0 3954808 153243 None Vol-6 Pg. No. 47 It. No. 11.11.4 of 2023-24 Supplying & fixing of retrofit type - LED bulb.......W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI 70%. efficacy 80 lumen per watt, life 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF 0.95, power loss should 5% of lamp wattage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 volts. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. 9W, 6500K Each 161.7 161.7 30.0 False None None False None False 4851.0 0 3954809 153243 None Vol-6 Pg. No. 47 It. No. 11.4.2 of 2023-24 Supplying of recess mounting non integrated type LED down light...... W luminaire comprising of pressure decast/ extruded aluminium housing, with spring loaded false ceiling clamps, LED of Power/COB with CCT 6500 degree K, CRI 70%. efficacy 100 lumen per W, 120degree beam spread, life 25000 burning hours and Compliance to IS10322/IEC 60598, LM 79 & LM 80. The lamp compartment is enclosed with anti glare opal diffuser which enhances the lighting level. LED's are driven by HF electronic driver integrated in a separate control gear assembly., with PF 0.95, power loss should 5% of lamp Wage, short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. 10-12W Each 1332.45 1332.45 103.0 False None None False None False 137242.35 0 3954810 153243 None Vol-6 Pg. No. 44 It. No. 11.4.3 of 2023-24 Supplying of recess mounting non integrated type LED down light...... W luminaire comprising of pressure decast/ extruded aluminium housing, with spring loaded false ceiling clamps, LED of Power/COB with CCT 6500 degree K, CRI 70%. efficacy 100 lumen per W, 120degree beam spread, life 25000 burning hours and Compliance to IS10322/IEC 60598, LM 79 & LM 80. The lamp compartment is enclosed with anti glare opal diffuser which enhances the lighting level. LED's are driven by HF electronic driver integrated in a separate control gear assembly., with PF 0.95, power loss should 5% of lamp Wage, short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. 15-18W Each 1754.55 1754.55 156.0 False None None False None False 273709.8 0 3954811 153243 None Vol-6 Pg. No. 44 It. No. 11.6.2 of 2023-24 Supplying of recess mounting non integral type ........ LED w luminaire comprising of pressure decast/extruded aluminium housing, with spring loaded false ceiling clamps, Power LEDs with CCT 6500 degree K, CRI 70%. efficacy 100 lumen per W, 120degree beam spread, life 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The lamp compartment is enclosed with anti glare opal diffuser which enhances the lighting level LEDs are driven by HF electronic driver integrated in a separate control gear assembly., with PF 0.95, power loss should 5% of lamp Wage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition LED modular down light 1'x1' 24 W Each 3876.6 3876.6 12.0 False None None False None False 46519.2 0 3954812 153243 None Vol-6 Pg. No. 44 It. No. 11.6.3 of 2023-24 Supplying of recess mounting non integral type ........ LED w luminaire comprising of pressure decast/extruded aluminium housing, with spring loaded false ceiling clamps, Power LEDs with CCT 6500 degree K, CRI 70%. efficacy 100 lumen per W, 120degree beam spread, life 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The lamp compartment is enclosed with anti glare opal diffuser which enhances the lighting level LEDs are driven by HF electronic driver integrated in a separate control gear assembly., with PF 0.95, power loss should 5% of lamp Wage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition LED modular down light 2'x2' 36 W Each 4780.65 4780.65 6.0 False None None False None False 28683.9 0 3954813 153243 None Vol-6 Pg. No. 47 It. No. 11.15 of 2023-24 Supplying and fixing of LED Bulkhead of 10W with IP65 protection and IK 08 impact resistance suitable for surface and wall mounting applications. Each 884.1 884.1 6.0 False None None False None False 5304.6 0 3954814 153243 None Vol-6 Pg. No. 9 It. No. 3.10.3 of 2023-24 Extra for supplying 4mm thick white plastic plate and covering for junction boxes of size 110mm conduite using necessary machine screws. No 22.05 22.05 350.0 False None None False None False 7717.5 0 3954815 153243 None Vol-6 Pg. No. 52 It. No. 12.49 of 2023-24 Supplying & Fixing of 250-400 W lamp Holder No 207.9 207.9 80.0 False None None False None False 16632.0 0 3954816 153243 None Vol-6 Pg. No. 4 It. No. 1.13 of 2023-24 Supplying and fixing Metal Fan Box with Round Hook No 122.85 122.85 36.0 False None None False None False 4422.6 0 3954817 153243 None Vol-6 Pg. No. 30 It. No. 6.1 of 2023-24 Supplying exhaust fan of 1440 RPM of 300 mm (12") size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply. Each 3133.2 3133.2 11.0 False None None False None False 34465.2 0 3954818 153243 None Vol-6 Pg. No. 30 It. No. 6.3.1 of 2023-24 Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts,50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double ball bearing system. 48" Sweep (1200mm) Regular model (Khaitan,Crompton Greaves,Orient,Polar,Bajaj,Havells,Almonard) Each 3133.2 3133.2 36.0 False None None False None False 112795.2 0 3954819 153243 None Vol-6 Pg. No. 56 It. No. 13.7.1 of 2023-24 Fixing all types and all capacities fluorecent/false ceiling/spot light/CFL fittings indoor on the wall / rafter / girders using 23/0.0076" twin twisted PVC insulated wires, required nos of round blocks and clamps (if required)a)On wall/ceiling/Rafters/Girders Each 128.1 128.1 319.0 False None None False None False 40863.9 0 3954820 153243 None Vol-6 Pg. No. 57 It. No. 13.10 of 2023-24 Fixing a ceiling/wall mounting fan of all capacities and all types to the existing S hook together with supplying and fixing a 5 amperes ceiling rose,necessary lenth of 23/0.0076 inch PVC insluted twisted copper wire and wiring completely. Each 179.55 179.55 36.0 False None None False None False 6463.8 0 3954821 153243 None Vol-6 Pg. No. 57 It. No. 13.14 of 2023-24 Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts and 5 A. ceiling rose with sufficient length of 23/0.0076 inch PVC insulated twin core wire. Each 516.6 516.6 11.0 False None None False None False 5682.6 0 3954822 153243 None Vol-6 Pg. No. 34 It. No. 7.2.1 of 2023-24 Supplying ...litres capacity vertical/horizontal type wall mounting Electrical water heater with 22 SWG copper/SS sheet metal inner Container tinned inside Fiber body outside, filled with glass wool between inner and outer container for thermal insulation complete. The inlet and outlet pipes so arranged that water flow inside results in water to flow out from the inner container without turbulence. The Inner container shall have direct immersion type copper tube nickel plate. 2kW capacity element with a neon indicator fitted with 20A capacity 25 to 85 degree Centigrade range thermostat. The water heater shall completely be wired with 40/0.0076 inch 3 core copper flexible wire of 1.5 meters length and the outer container provided with heavy gauge brackets for wall mounting. 5 Star With Fibre body 25 L Each 12525.45 12525.45 5.0 False None None False None False 62627.25 0 3954823 153243 None Vol-6 Pg. No. 13 It. No. 32.15 of 2023-24 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part- 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 120 Sqmm, 3.5 Core, (23 GI Strips - 4 x 0.8 mm) Km 479733.45 479733.45 0.05 False None None False None False 23986.6725 0 3954824 153243 None Vol-1 Pg. No. 6 It. No. 1.6.1 of 2023-24 Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, including dressing of excavated surfaces, disposing off or leveling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m. Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering and lift upto 1.5 m including cost of labour, tools, usage& other appurtenances required to complete the work In all kinds of soils. Depth upto 1.50m Mtr 508.2 508.2 50.0 False None None False None False 25410.0 0 3954825 153243 None Vol-6 Pg. No. 52 It. No. 21.07 of 2023-24 Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff LT Cable 120 to 240 Sqmm Km 33891.9 33891.9 0.05 False None None False None False 1694.595 0 3954826 153243 None Vol-6 Pg. No. 26 It. No. 59.06 of 2023-24 Heavy Duty Copper Terminal Long Barrel 120 Sqmm Copper Terminal, Apprx Wt: 64 Gm No 147.0 147.0 8.0 False None None False None False 1176.0 0 3954827 153243 None Vol-6 Pg. No. 52 It. No. 22.10 of 2023-24 Making and Fixing pot head for LT UG Cable Heat shrinkable Straight Through Joint 120 to 240 Sqmm Set 399.0 399.0 3.0 False None None False None False 1197.0 0 3954828 153243 None Vol-5 Pg. No. 95 It. No. 9.1.5 of 2023-24 Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and rolling and lowering into trenches, laying true to line and jointing ofpipes and specials with electrofusion welding, giving hydraulic test as per relevant ISS with all lead and lifts including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excation, testing and commissioning. The rate is exclusive of required specials and fittings wherever necessary like saddle Tee, stub ends, flanged sets, bedns, reducers etc. complete (Contractor will make his own arrangements for procuring water for testing) etc. complete. NOTE: Upto 110mm dia Coil shall be used. For :HDPE PE 80 PN 6.0 HDPE Grade PE80-PN6.0,125mm dia m 638.4 638.4 50.0 False None None False None False 31920.0 0 3954829 153243 None Vol-6 Pg. No. 17 It. No. 5.1.13 of 2023-24 Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts and wiring complete. Protection of Overload and Short circuit with thermal Magnetic/Microprocessed release and Earth Fault as per IS-13947. ( Icu = Ics)(34/9) FOUR POLE 250 A 25 kA Each 22460.55 22460.55 1.0 False None None False None False 22460.55 0 3954830 153243 None Vol-6 Pg. No. 19 It. No. 5.33 of 2023-24 Supplying of multi function digital meter with three line back light LCD type display for voltage,Current,frequency,Power, Powerfactor,KVA,KWH,KVARsuitable for 3 Phase,4 wire LT network with IP 54 degree of protection and completely wired as required wuth communication Port and Class 0.5s accuracy. Each 9780.75 9780.75 1.0 False None None False None False 9780.75 0 3954831 153243 None Vol-6 Pg. No. 18 It. No. 5.21 of 2023-24 Supplying,fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based,digital readout of percentage leakage current,programable delay/auto/manual reset facility suitable to mount on DIN rail/flush mounting on panel board. Each 9717.75 9717.75 1.0 False None None False None False 9717.75 0 3954832 153243 None Vol-6 Pg. No. 19 It. No. 5.36 of 2023-24 Supplying, fixing and wiring 50/5A to 400/5A 5VA Burden class 1 Current Transformer. Each 882.0 882.0 2.0 False None None False None False 1764.0 0 3954833 153243 None Vol-6 Pg. No. 17 It. No. 5.18.9 of 2023-24 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and wiring complete as required. 5.17.9)50-63Amps TPN Each 3242.4 3242.4 6.0 False None None False None False 19454.4 0 3954834 153243 None Vol-6 Pg. No. 17 It. No. 5.16 of 2023-24 Supplying,fixing and Fixing of Shunt trip suitable for MCCB. CBCT Each 1788.15 1788.15 1.0 False None None False None False 1788.15 0 3954835 153243 None Vol-6 Pg. No. 20 It. No. 5.40.2 of 2023-24 Supplying …..amps rated 3phase with netural bus bar using required capacity electrolytic alluminium strips covered with heat shrinkable coloured PVC sleeve,mounted on phenolic/ERP/DMC insulator which are mounted on powder coated 40x6 mm M.S.flat frame work in existing panel board.The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts,nuts and washers etc.,complete. 200Amps 4x30x10mm Alluminium Strips Rmtr 3606.75 3606.75 4.0 False None None False None False 14427.0 0 3954836 153243 None Vol-6 Pg. No. 20 It. No. 5.42.1 of 2023-24 Fabricating supplying and mounting MS box made out 16 SWG suitable for floor/wall mounting,fully weather proof with provision for better heat dissipation, provided with hinged front cover,equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 2 coats of red oxide primer paint and finally finished with approved colour enameled metal paint etc., complete. 14SWG Sq CM 0.53 0.53 90000.0 False None None False None False 47700.0 0 3954837 153243 None Vol-6 Pg. No. 19 It. No. 5.38 of 2023-24 Supplying and fixing of LED type pannel board indicating lamp with reqired colour suitable for 220v A.C.50 Hz 12/24v D.C. Each 540.75 540.75 3.0 False None None False None False 1622.25 0 3954838 153243 None Vol-6 Pg. No. 15 It. No. 5.11.5 of 2023-24 Supplying of an load change over switches 4 poles AC-23A Duty 415V, 50Hz, AC Supply (Open Execution) 250 Amps Each 20254.5 20254.5 1.0 False None None False None False 20254.5 0 1726038871000 0 None None Buildings External Electrification works 767569.3 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3954839 153244 None Vol-6 Pg. No. 3 It. No. 1.01 of 2023-24 RCC Pole - 9 Mtr Long, 145 Kg WL (Dwg No. BESCOM/GM/QS&S/02 Dtd 24.11.2018) as per IS-785 Mtr 7429.8 7429.8 4.0 False None None False None False 29719.2 0 3954840 153244 None Vol-6 Pg. No. 3 It. No. 2.01 of 2023-24 Cross Arms (MS & GI) as per IS-1977 11 kV, Horizontal Cross Arm - Mild Steel (MS) (Dwg No. BESCOM/GM/QS&S/04 Dtd 24.11.2018) No 390.6 390.6 4.0 False None None False None False 1562.4 0 3954841 153244 None Vol-6 Pg. No. 4 It. No. 5.01 of 2023-24 Clamps A Type (MS & GI) as per IS-1977 RCC Pole Clamp - MS (Dwg No. BESCOM/GM/QS&S/30 Dtd 24.11.2018) No 89.25 89.25 4.0 False None None False None False 357.0 0 3954842 153244 None Vol-6 Pg. No. 5 It. No. 6.10 of 2023-24 Insulator as per IS-1445 for Ceremic, IS- 7935 for GI Pin, IEC-61109 for Polymeric 11 kV, 45 kN Polymeric Insulator No 195.3 195.3 12.0 False None None False None False 2343.6 0 3954843 153244 None Vol-6 Pg. No. 5 It. No. 7.02 of 2023-24 ACSR Conductor as per IS-398 (Part - 2/1996) Rabbit ACSR (6/3.35 mm Al + 1/3.35 mm St), Std Wt: 214 Kg/KM Km 48545.7 48545.7 0.3 False None None False None False 14563.71 0 3954844 153244 None Vol-6 Pg. No. 5 It. No. 8.02 of 2023-24 Guy Wire & GI Wire as per IS-2141 8 SWG GI Wire (4.064 mm Dia), Std Wt: 131 Kg/KM MT 78792.0 78792.0 0.03 False None None False None False 2363.76 0 3954845 153244 None Vol-6 Pg. No. 6 It. No. 9.02 of 2023-24 PG Clamp Rabbit to Rabbit No 107.1 107.1 4.0 False None None False None False 428.4 0 3954846 153244 None Vol-6 Pg. No. 7 It. No. 12.08 of 2023-24 Distribution Transformer - 3 Phase, 11kV/433V - Stacked CRGO Core with Oil as per IS-1180 (Part-1): 2014 A. OPEN BUSHING TYPE 250 kVA, Aluminium Wdg, Star 2 (5 Star) No 566024.55 566024.55 1.0 False None None False None False 566024.55 0 3954847 153244 None Vol-6 Pg. No. 9 It. No. 18.02 of 2023-24 LT Distribution Box as per IS-13947 Part- 1&2 LT Distribution Box for 250 kVA DTC with MCCB's (Sheet Metal) (Dwg No. BESCOM/GM/QS&S/08 Dtd 24.11.2018) No 23954.7 23954.7 1.0 False None None False None False 23954.7 0 3954848 153244 None Vol-6 Pg. No. 9 It. No. 19.01 of 2023-24 Lightning Arrester as per IEC-60099-4 9 kV, 5 kA Lightning Arrester Metal Oxide Ceramic type with GROUND DISCONNECTOR (Dwg No. BESCOM/GM/QS&S/26 Dtd 24.10.2007 No 966.0 966.0 1.0 False None None False None False 966.0 0 3954849 153244 None Vol-6 Pg. No. 9 It. No. 20.01 of 2023-24 HG Fuse Unit as per IS-5350 Part-2 11 kV, HG Fuse Unit with Solid Core Insulator (Dwg No. BESCOM/GM/QS&S/21 Dtd 24.11.2018) Set 1122.45 1122.45 2.0 False None None False None False 2244.9 0 3954850 153244 None Vol-6 Pg. No. 9 It. No. 21.03 of 2023-24 Double Pole TC Set for erection of Transformer on RCC/PSCC 9 Mtr Long Poles as per IS-1977 For 25/63/100 kVA 4/5 Star Rated Transformer on RCC Pole - 9 Mtr Long, 145 Kg WL - MS Set 18272.1 18272.1 1.0 False None None False None False 18272.1 0 3954851 153244 None Vol-6 Pg. No. 11 It. No. 24.01 of 2023-24 GOS as per IS-9921, IS-1977 11 kV, 200 Amps Single Break GOS (Dwg No. BESCOM/GM/QS&S/23 Dtd 24.11.2018) Set 9922.5 9922.5 2.0 False None None False None False 19845.0 0 3954852 153244 None Vol-6 Pg. No. 12 It. No. 26.01 of 2023-24 DP Set (2 Pole Strucrure Kit) as per IS-1977 For RCC Pole - 9 Mtr Long, 145KG WL/PSCC Pole - 9 Mtr Long, 300Kg WL - MS (Dwg No. BESCOM/GM/QS&S/35 & 63 Dtd 24.11.2018) Set 6721.05 6721.05 1.0 False None None False None False 6721.05 0 3954853 153244 None Vol-6 Pg. No. 16 It. No. 37.01 of 2023-24 11 kV, 3 Core, XPLE HTUG Cable with pressure extruded inner sheeth, ROUND WIRE ARMOURED as per IS-7098 (Part-2) Armouring wires dia and Resistivity as per IS-3975 95 Sqmm, (54 GI Wires - 2.5 mm Dia) Km 934149.3 934149.3 0.03 False None None False None False 28024.479 0 3954854 153244 None Vol-6 Pg. No. 20 It. No. 45.04 of 2023-24 11 kV, Jointing & Cable Termination Kit as per IS-13573 Heat Shrinkable Indoor Type Cable Termination Kit for XLPE Cable 3x95 Sqmm Set 3931.2 3931.2 2.0 False None None False None False 7862.4 0 3954855 153244 None Vol-6 Pg. No. 20 It. No. 45.10 of 2023-24 11 kV, Jointing & Cable Termination Kit as per IS-13573 Heat Shrinkable Outdoor Type Cable Termination Kit for XLPE Cable 3x95 Sqmm Set 3294.9 3294.9 2.0 False None None False None False 6589.8 0 3954856 153244 None Vol-6 Pg. No. 26 It. No. 59.05 of 2023-24 Heavy Duty Copper Terminal Long Barrel 95 Sqmm Copper Terminal, Apprx Wt: 58 Gm No 135.45 135.45 8.0 False None None False None False 1083.6 0 3954857 153244 None Vol-6 Pg. No. 27 It. No. 60.07 of 2023-24 Aluminium End Terminal (Lug) 95 Sqmm No 15.75 15.75 8.0 False None None False None False 126.0 0 3954858 153244 None Vol-6 Pg. No. 54 It. No. 12.57 of 2023-24 Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40 mm dia 2.9 mm thick 2.5m long GI pipe with GI funnel with mesh and suitable size reducer fixed on the top of the earth electrode.The funnel should be enclosed in a CC chamber of 400x400x400 mm with a cast iron cover. The earth electrode shall have staggered holes of 12 mm dia and the electrode should be covered 150 mm all-round with alternate layers of salt and charcoal from the bottom of the CC chamber. The connection from the electrode is to be established through GI strip using GI bolts and nuts No 4468.8 4468.8 4.0 False None None False None False 17875.2 0 3954859 153244 None Vol-6 Pg. No. 43 It. No. 1.1.1 of 2023-24 Digging of Pit 1.8 Mtr depth for errection of 9 to 10 Mtr Long Steel/RCC/PSCC supports as per approved Drawing Ordinary Soil Per Pit 660.45 660.45 4.0 False None None False None False 2641.8 0 3954860 153244 None Vol-6 Pg. No. 44 It. No. 2.02 of 2023-24 Erection of Poles Erection of RCC/PSCC Pole of 9 to 10 Mtr long in a pit of 1.8 Mtr depth No 1168.65 1168.65 4.0 False None None False None False 4674.6 0 3954861 153244 None Vol-6 Pg. No. 44 It. No. 3.02 of 2023-24 Erection of Double Pole Transformer Structure using 9 Mtr Long RCC (145 Kg WL)/PSCC (300 Kg WL) Pole including fixing of Structure Materials, Erection of Poles etc., complete for mounting of Transformer as per approved drawing For 100 to 250 kVA Per Structure 6261.15 6261.15 1.0 False None None False None False 6261.15 0 3954862 153244 None Vol-6 Pg. No. 45 It. No. 5.01 of 2023-24 Fixing of Cross Arm, Single Top Support, EG Stirrup, Anticlimbing Device, Guy Set, Guarding etc., Fixing of 2 Pin cross arm with Insulator and Braces fixing No 168.0 168.0 4.0 False None None False None False 672.0 0 3954863 153244 None Vol-6 Pg. No. 46 It. No. 8.03 of 2023-24 Erection of Transformer & Structures Erection of 200 - 250 kVA Transformer No 2391.9 2391.9 1.0 False None None False None False 2391.9 0
generalCriterionList	createdTs version createdDate modifiedDate criterionType description tenderEligibilityCriterionDocumentList 1726038872000 0 None None ELIGIBILITY Tenders from Joint ventures are not acceptable. None 1726038872000 0 None None ELIGIBILITY Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka None 1726038872000 0 None None ELIGIBILITY Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document. None 1726038872000 0 None None ELIGIBILITY It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission. None 1726038872000 0 None None ELIGIBILITY EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection. None 1726039418000 0 None None ELIGIBILITY Bidder shall pay Contract Management Module processing fees of 0.025%of the contact value (Min Rs.500/- & Max Rs.7500/-) soon after contract has been issued to bidder. None 1726039431000 0 None None ELIGIBILITY The agency shall furnish affidavit stating that existing commitments furnished by him are true. If found falls action shall be taken as per rules. None 1726039449000 0 None None ELIGIBILITY The bidder shall bear all costs associated with the preparation and submission of each tender and the employer will in no case be responsible and liable for those costs. The department is not responsible for any delay in accessing KPP portal. None 1726039483000 0 None None ELIGIBILITY As per Karnataka State Government order No.LD/300/LET/2006 Bangalore Dated 01.01.2007 and Government Letter No.PW/134/BMS/2007 Dated 27.7.2007, a sum amounting to 1%of the bill amount will be deducted towards Construction Labour Welfare fund. None 1726039501000 0 None None ELIGIBILITY The Employer reserves the right to reject any or all Tenders without assigning any reason. None 1726039515000 0 None None ELIGIBILITY Conditional tenders will not be accepted None 1726039542000 0 None None ELIGIBILITY Financial Year will be reckoned as the period between first day of April and Thirty first day of March of succeeding year. (both days inclusive) None 1726039559000 0 None None ELIGIBILITY The Item Rates quoted shall include cost of Royalty charges on constructive materials & other taxes as per the prevailing Government Orders at the time of execution and including cost and conveyance of all materials, curing, loading and unloading, with all leads & lifts, labour, hire charges of all machineries & equipments and all incidental charges etc.complete necessary for completion of work. All the Items shall be executed as directed by the Engineer-in-charge of the work None 1726039575000 0 None None ELIGIBILITY The Tenderer shall obtain the required work done certificates from the Competent Authority not below the rank of Executive Engineer orequivalent. And scan the original certificates and attach the scanned file tothe bid. The Original Certificate/certificates shall be produced at the timeof opening of technical bids for physical verification None 1726039599000 0 None None ELIGIBILITY Tenderer shall note that the Tenders of those found Eligible as mentioned in Clause 3 -Qualification of the Tenderer in Section 2: Instructions to Tenderers (ITT), will only be considered for evaluation None 1726039624000 0 None None ELIGIBILITY The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of KPPP portal due to internet connectivity issues and technical glitches at bidders end. None 1726039647000 0 None None ELIGIBILITY The tenderer shall furnish required information in all prescribed formats.Scan & upload all the original documents/Formats required for this bid to2 of 17 the KPPP portal. The Original documents/ Formats shall be produced atthe time of opening of technical bid for physical verification None 1726039673000 0 None None ELIGIBILITY The tenderer shall note that the scanned Documents shall also be up loaded in the tasks created under Document/ Evidence required from the bidder None 1726039696000 0 None None ELIGIBILITY All materials required for this work shall be procured by the bidder himself and should got tested by the quality control authorities at his own cost before use on the work. None 1726039719000 0 None None ELIGIBILITY The intending contractors are requested to note that they should abide bythe detailed instructions and conditions contained in the standard bid document KW4 KPWD and further orders theron None 1726039735000 0 None None ELIGIBILITY The KPWD Code, KTTP Act/ Rules, Delegation of powers and other Government orders issued by Government from time to time will apply. None 1726039758000 0 None None ELIGIBILITY If the office happens to be closed on the dates notified, next working day will holds good. None 1726039785000 0 None None ELIGIBILITY The field laboratory shall preferably locate, adjacent to the site with the required amenity as per the clause. Failing which 1% of the amount of work done will be penalized None 1726039809000 0 None None ELIGIBILITY If undue delay caused by the contractor, the progressive damages caused to road will be assessed and make good at the cost and risk of the contractor. In addition, suitable action will be initiated against the contractor for the damage occurred during the undue delay period in accordance with the Karnataka Highway act 1964 None 1726039823000 0 None None ELIGIBILITY All safety precautions, warning signs, night illumination, reflectors,deployment of security guards has to be ensured so that no untoward incident happens on account of negligence or any project activity till completion. Contractor should indemnify the client to that extent. None 1726039839000 0 None None ELIGIBILITY 18%GST shall be paid to the tendered amount separately None 1726039870000 0 None None ELIGIBILITY The increase in GST shall not be paid in the extended period of Contract for which the contractor alone is responsible for delay as determined by the authority while granting the extension of time None 1726039897000 0 None None ELIGIBILITY Any dispute or difference or claim arising out of, or in connection with, or relating to the present contract or the breach, termination or invalidity thereof shall be referred and settled under the Arbitration Centre -Karnataka (Domestic & International) Rules 2012, by one or more arbitrators appointed in accordance with its rules None 1726039920000 0 None None ELIGIBILITY The tenderers shall note that as per the Government Order No.FD/850/EXP-12/15 dated 29-12-2015 and GO No.FD/130/EXP-12/15 dated 8-9-2015 & GO no 850-12/15 Dated 15-12-2016 the exemption from payment of EMD for Micro and small enterprises registered with NSIC under single point vendor registration scheme is applicable only for purchases, but not for works None 1726039936000 0 None None ELIGIBILITY Contractor should follow strictly the prevailing rules of labour act and applicable any other law as concerned to work. In case of any mishap, accidents are cause of death it is the duty of the contractor to settle the 3 of 17 dispute at is own cost. In no way department is held responsible None 1726039961000 0 None None ELIGIBILITY construction materials (Minerals Metal, Sand and Murum, etc.,) shall be bought from the authorized quarries along with the mineral dispatch permit or else 5 times the royalty will be deducted as penalty as per the Directions on the Director, Mines and Geology Department Bangalore Proceedings Dated 25-03-2013 None 1726039975000 1 None None ELIGIBILITY The defect liability period is one (1) years from the date of actual completion of work None 1726039998000 0 None None ELIGIBILITY Financial turn over and Financial commitments of previous years shall be given weight age of 10% per year to bring them to the price level of 2024-25 in the technical qualification criteria None 1726040030000 0 None None ELIGIBILITY As per Govt circular no GO-FD/AE 263/EXP12-2022 dt-11-05-2022, this clause for owning key equipments for works costing up to Rs.3.00 crores is exempted. However it is obligatory for the contractor to use the required machineries for various activities involved in construction as per MORTH specification. None 1726040069000 0 None None ELIGIBILITY The tender period for completion of work is eleven (11) Calendar months. (Including monsoon period) None 1726040094000 0 None None ELIGIBILITY The tenderer has to quote the rates are exclusive of GST and As per Government CIRCULAR NO:FD/447/EXPENDITURE None 1726040122000 0 None None ELIGIBILITY Estimate rates are excluding GST and the prevailing GST 18 percent of APT is added in the form of Lumpsum in santioned estimate as per the guidelines in common SR 2021-22 GO PWD51 RDF 2019 Bengaluru dt 18-03-2022. Therefore, APT or ECV is excluding GST. In kppp portal there is no option to add GST separately over and above APT during DTSprocess. Hence even through the tender has been invited by opting for the INCLUSIVE option, the item wise rates do not include GST. Hence GST will be paid separately for the quoted amount as per the Govt. circular no FD/447/expenditur /12/2022/dt -30-07-2022. Therefore GST declaration certificate must be uploaded mandatorily by the prospective bidders. None 1726040152000 0 None None ELIGIBILITY All necessary arrangements shall be made and precaution taken to prevent completely or partially, damage to the structure or labours / employees during construction period. (As per recent Labour Act) Contractor shall be fully responsible for any damage to the structure during the construction and maintainance period.Any damage caused due to any reasons shall be rectified / replaced at his own cost as per the direction of Engineer in charge. Nothing shall be payable by the Department on account of inclusive of all such arrangements/ precautions work needed None 1726040218000 0 None None ELIGIBILITY The Earnest Money Deposit Rs.3,73,000.00 through KPPP portal OR it shall be in two parts. Part (1) Rs. 1,00,000.00 through KPPP portal under anyone of the option(CC/DD/NEFT/OTC) and Part (2) Balance EMD of Rs.2,73,000.00 shall be in favour of the Executive Engineer, PWD Division Koppal, in the form of Bank Guarantee in the prescribed format obtained from any Nationalized/Scheduled Bank. The scanned copy of the original Part(2) EMD should be uploaded along with the Technical bid. The part (2)of the EMD shall be delivered to the Executive Engineer before the prescribed Date and time of opening of the Technical Bids None 1726040249000 0 None None ELIGIBILITY The contractor shall bound to comply the prevailing rules and regulations with regard to the EPF rules None 1726043413000 0 None None ELIGIBILITY Star rate applicable as per Go No PWD 159 CRM 2009 Dated 30-09-2010 None
preQualCriterionList	None
technicalCriterionList	createdTs version createdDate modifiedDate description criterionCategoryText criterionTypeOthersValue tenderTechnicalCriterionDocumentList None None None None Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year None None None None None None Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year None None None None None None Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx) None None None None None None Total value of civl engineering works executed and payments received in the last five years (year-wise) None None None None None None Banker Details for reference None None None None None None Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded None None None None None None Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years None None None None None None Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded None None None None None None List of Financial Resources with Certificates None None None None None None Satisfactoriy completed as prime contractor at-least one such similar Building work of value not less than Rs.124.23 lakhs (50% of estimated cost of tender) Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None Executed in any one year the following minimum quantities of work (Earth work-592.00 cum,Cement Concrete - 438.00 cum, SSM/BBM-194.50 cum, Steel-37.00 mt, Plaster-2447.00 sqm and Flooring-1107.50 sqm (80% of peak rate of construction) Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs.496.92 Lakhs) Financial Status None createdTs version createdDate modifiedDate documentName None None None None Audited CA Certificate of Annual Turnover None None None None Liquid assets and /or availability of credit facilities of no less than Rs. 67.80 Lakhs (estimated cash flow for 3 months of peak construction period) Financial Status None createdTs version createdDate modifiedDate documentName None None None None Line of Credit None None None None List of existing commitments and ongoing works Others Ongoing Works createdTs version createdDate modifiedDate documentName None None None None Others -- Ongoing work details None None None None List of works for which tenders already submitted Others tenders already submitted createdTs version createdDate modifiedDate documentName None None None None Others -- Tender submitted list
tenderCriterionDocumentList	documentName optional documentTypeText Annual Turnover Certificate True Technical Bid Company Registration Certificate False Technical Bid Reserved Category Certificate False Technical Bid Small Scale Industries Certificate False Technical Bid PWD Registration certificate True Technical Bid Similar Nature Workdone certificate issued by not below the rank of executive engineer True Technical Bid Quantity Wise Work Done Certificate True Technical Bid Line of credit True Technical Bid
tenderWorkLocationList
tenderAddress	createdTs 1726045484000 version 0 createdDate None modifiedDate None blockNumber Office of the Executive Engineer PWD Division Koppal street None city KOPPAL state Karnataka pin 583231
tenderRecallDTO	None