| 1726053803000 | 0 | None | None | Other Works | Construction of swimming pool at Mulagund, Gadag district | 24071734.21 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3959457 | 153430 | None | ITEM01 | Earth work excavation for Foundation by mechanical means for all works and depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting and stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery and other appurtenaces required to complete the work | Cum | 105.06 | 105.06 | 393.6 | False | None | None | False | None | False | 41351.616 | 0 | | 3959458 | 153430 | None | ITEM02 | Earth work excavation for Foundation by mechanical means for all works and depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting and stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery and other appurtenaces required to complete the work Depth exceeding 1.5 m, but not exceeding 3 m | Cum | 437.75 | 437.75 | 1196.0 | False | None | None | False | None | False | 523549.0 | 0 | | 3959459 | 153430 | None | ITEM03 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m | Cum | 273.98 | 273.98 | 891.2 | False | None | None | False | None | False | 244170.976 | 0 | | 3959460 | 153430 | None | ITEM04 | Construction of Granular Sub-Base of required grading as per design mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 501 Grade-III | Cum | 2562.64 | 2562.64 | 83.4 | False | None | None | False | None | False | 213724.176 | 0 | | 3959461 | 153430 | None | ITEM05 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead and lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement and formwork shall be paid separately) | Cum | 6168.67 | 6168.67 | 209.05 | False | None | None | False | None | False | 1289560.4635 | 0 | | 3959462 | 153430 | None | ITEM06 | Providing and laying in Reinforced cement concrete for all Basement and surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead and lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement and formwork to be paid separately) | Cum | 7341.84 | 7341.84 | 164.24 | False | None | None | False | None | False | 1205823.8016 | 0 | | 3959463 | 153430 | None | ITEM07 | Supplying, Fitting and Placing TMT Fe 500 and above Reinforcement in Foundation / Substructure /Superstructure complete as per Drawing and Technical Specifications. | Tonne | 92192.21 | 92192.21 | 19.7 | False | None | None | False | None | False | 1816186.537 | 0 | | 3959464 | 153430 | None | ITEM08 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. | Sqm | 1267.93 | 1267.93 | 192.0 | False | None | None | False | None | False | 243442.56 | 0 | | 3959465 | 153430 | None | ITEM09 | Providing and laying water proofing treatment to the Retaining wall area with PU Elastomeric Single component liquid applied, cold applied, moisture cured high tensile elastomeric PU waterproofing membrane having elongation of more than 500% and having solid content of above 90% at 1.6kg per m2 in 2 coats to achieve final DFT (dry film thickness) of 1mm including prime coat of epoxy primer at150 g/ m2. The cost is inclusive of surface preparation, crack filling, repair of loose mortar etc. completely as per specification and with a 10 years warranty on product and work from certified manufacturers as per the direction of the Engineer In charge. | Sqm | 914.64 | 914.64 | 754.6 | False | None | None | False | None | False | 690187.344 | 0 | | 3959466 | 153430 | None | ITEM10 | Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge | Sqm | 364.62 | 364.62 | 754.6 | False | None | None | False | None | False | 275142.252 | 0 | | 3959467 | 153430 | None | ITEM11 | Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry at 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete | Sqm | 1114.46 | 1114.46 | 777.95 | False | None | None | False | None | False | 866994.157 | 0 | | 3959468 | 153430 | None | ITEM12 | Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints finished with cement mortar 1:3 over existing cement concrete bed , including cost of materials, mortar, labour, curing complete as per specifications. | Sqm | 5487.84 | 5487.84 | 53.46 | False | None | None | False | None | False | 293379.9264 | 0 | | 3959469 | 153430 | None | ITEM13 | Providing edge moulding to 18mm thick Granite stone counters, vanities etc including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge. | Sqm | 337.84 | 337.84 | 112.0 | False | None | None | False | None | False | 37838.08 | 0 | | 3959470 | 153430 | None | ITEM14 | Porcelain mosaic tiles of 48mm X 48mm X 6mm, thermal shock resistance, chemical resistance, sheet size 306mm X 306mm, using adhesive and epoxy grout including laying, Grouting, acid wash and cleaning complete tiles make : piccolo / Pixel / equivalent, Adhesive and epoxy make : Bal endura / latecrete / roff / equivalent | Sqm | 4339.0 | 4339.0 | 658.6 | False | None | None | False | None | False | 2857665.4 | 0 | | 3959471 | 153430 | None | ITEM15 | Providing Water for testing, Dewatering and Pumping charges complete, (Market Rate) | Ltr | 0.1 | 0.1 | 711600.0 | False | None | None | False | None | False | 71160.0 | 0 | | 3959472 | 153430 | None | ITEM16 | Earth work excavation for Foundation by mechanical means for all works and depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting and stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery and other appurtenaces required to complete the work Depth exceeding 1.5 m, but not exceeding 3 m | Cum | 437.75 | 437.75 | 244.61 | False | None | None | False | None | False | 107078.0275 | 0 | | 3959473 | 153430 | None | ITEM17 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m | Cum | 273.98 | 273.98 | 171.227 | False | None | None | False | None | False | 46912.77346 | 0 | | 3959474 | 153430 | None | ITEM18 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead and lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement and formwork shall be paid separately) | Cum | 6168.67 | 6168.67 | 22.16 | False | None | None | False | None | False | 136697.7272 | 0 | | 3959475 | 153430 | None | ITEM19 | Providing and laying in position Reinforced cement concrete M25 for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead and lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement and formwork to be paid separately) | Cum | 7048.16 | 7048.16 | 16.75 | False | None | None | False | None | False | 118056.68 | 0 | | 3959476 | 153430 | None | ITEM20 | Providing and laying in Reinforced cement concrete for all Basement and surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead and lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement and formwork to be paid separately) | Cum | 8009.28 | 8009.28 | 14.07 | False | None | None | False | None | False | 112690.5696 | 0 | | 3959477 | 153430 | None | ITEM21 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead and lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars and formwork to be paid separately) | Cum | 7753.12 | 7753.12 | 3.24 | False | None | None | False | None | False | 25120.1088 | 0 | | 3959478 | 153430 | None | ITEM22 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead and lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars and formwork to be paid separately) | Cum | 8457.95 | 8457.95 | 43.58 | False | None | None | False | None | False | 368597.461 | 0 | | 3959479 | 153430 | None | ITEM23 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead and lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars and formwork to be paid separately) | Cum | 10220.02 | 10220.02 | 3.35 | False | None | None | False | None | False | 34237.067 | 0 | | 3959480 | 153430 | None | ITEM24 | Supplying, Fitting and Placing TMT Fe 500 and above Reinforcement in Foundation / Substructure /Superstructure complete as per Drawing and Technical Specifications. | Tonne | 92140.71 | 92140.71 | 8.099 | False | None | None | False | None | False | 746247.61029 | 0 | | 3959481 | 153430 | None | ITEM25 | Providing Size Stone masonry with hard stone in foundation and plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) | Cum | 6580.67 | 6580.67 | 112.44 | False | None | None | False | None | False | 739930.5348 | 0 | | 3959482 | 153430 | None | ITEM26 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. | Sqm | 1267.93 | 1267.93 | 570.42 | False | None | None | False | None | False | 723252.6306 | 0 | | 3959483 | 153430 | None | ITEM27 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. | Sqm | 1137.12 | 1137.12 | 75.4 | False | None | None | False | None | False | 85738.848 | 0 | | 3959484 | 153430 | None | ITEM28 | Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge | Sqm | 364.62 | 364.62 | 1955.96 | False | None | None | False | None | False | 713182.1352 | 0 | | 3959485 | 153430 | None | ITEM29 | Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali and fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied at 1.43 litre/ 10 m². Over and including priming coat of exterior primer applied at 0.90 litre/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge | Sqm | 160.68 | 160.68 | 1510.36 | False | None | None | False | None | False | 242684.6448 | 0 | | 3959486 | 153430 | None | ITEM30 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge | Sqm | 103.0 | 103.0 | 350.4 | False | None | None | False | None | False | 36091.2 | 0 | | 3959487 | 153430 | None | ITEM31 | Providing and laying Polished Glazed Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand and manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). | Sqm | 1365.78 | 1365.78 | 144.235 | False | None | None | False | None | False | 196993.2783 | 0 | | 3959488 | 153430 | None | ITEM32 | Providing and laying Polished Glazed Vitrified tiles with thickness 10 mm in floor with different sizes with water absorption less than 0.08% and conforming to IS:15622, of approved brand and manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). | Sqm | 2049.7 | 2049.7 | 491.52 | False | None | None | False | None | False | 1007468.544 | 0 | | 3959489 | 153430 | None | ITEM33 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings / wooden frames with rawl plugs screws etc. | Kg | 188.49 | 188.49 | 693.0 | False | None | None | False | None | False | 130623.57 | 0 | | 3959490 | 153430 | None | ITEM34 | Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) having minimum density of 650 kg/m3 and screw withdrawal strength of 1800 N (Face) and 900 N (Edge), minimum compressive strength of 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws The cost includes cost of materials, transportation, labour and fixing charges.(Cost of Fixtures to be paid separately | Sqm | 4162.23 | 4162.23 | 28.35 | False | None | None | False | None | False | 117999.2205 | 0 | | 3959491 | 153430 | None | ITEM35 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge | Sqm | 172.01 | 172.01 | 101.52 | False | None | None | False | None | False | 17462.4552 | 0 | | 3959492 | 153430 | None | ITEM36 | Providing and fixing of 3track x 2panel sliding windows made out of multi chambered UPVC(Matching to RAL9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets grey colour having isolated drainage and reinforced with Galvanized Iron profile throughout the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardwareand Multi point locking system with touch lock. Wall thickness of frame and sash shall be of 2mm to 2.5mm. Maximum possible size 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor TandPs shall not be made) | Sqm | 6936.02 | 6936.02 | 20.52 | False | None | None | False | None | False | 142327.1304 | 0 | | 3959493 | 153430 | None | ITEM37 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows and other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 850 kg/m3, screw withdrawal strength of 2200 N (Face) and 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-InCharge. (Fixtures shall be paid for separately) | Sqm | 831.21 | 831.21 | 90.0 | False | None | None | False | None | False | 74808.9 | 0 | | 3959494 | 153430 | None | ITEM38 | FILTERTANK :- Supply of Imported fiber glass pressure sand filter AQUALUX make tank of dia 1600mm fitted with pressure guage , manual air bleeder, water drain and Emptying Plug fitted with collector homs and diffuser made unplasticized PVC and Polypropylene Filter flow rate- 76 Cum per hour Maximum working pressure 2.5-3.5 kg per CM2 . Supply of 5 valve Battery with connection to the filter with accessories etc., complete. Including PVC Solvent, Teflon Tape and others, inclusive all Taxes HOM of Machinaries , Fabrications , Labour charges etc complete as per additional Technical, Bid Document special specifications enclosed for the succssful completion of the work and as per the directions of the Engineer in charge of work. Complete as per specifications and as directed by the Engineer incharge of work.[Total volume of water 7,84,050 turn over rate 5.15 hours] (Data rate approved by Supintending Engineer, PW,PandIWTD Dharwad Circle, Dharwad vide letter No. 343 Dtd: 21-4-2012) | Nos | 755370.0 | 755370.0 | 2.0 | False | None | None | False | None | False | 1510740.0 | 0 | | 3959495 | 153430 | None | ITEM39 | Supply of Filter Media | Kg | 30.8 | 30.8 | 6400.0 | False | None | None | False | None | False | 197120.0 | 0 | | 3959496 | 153430 | None | ITEM40 | Centrifugal Cast Iron Pumps, Mechanical Seal in Stainless Steel. I.P.-54 motor protection. Stainless steel AISI -420 shaft. With in built strainer basket. Conn. PN-16 according to DIN2501. Flowrate : 76m3/h. 7.5 HP Voltage 400V/ 3 ph. (2 working and 2 standby) Make: Aqualux / Equivalent | Nos | 183040.0 | 183040.0 | 4.0 | False | None | None | False | None | False | 732160.0 | 0 | | 3959497 | 153430 | None | ITEM41 | BUTTERFLY VALVES AND FLANGES:- PVC Butterfly Valves and NRV of 110mm with PVC flange Adapter, with nuts and bolts Make: Supreme / Cepex / Equivalent | Nos | 21615.0 | 21615.0 | 20.0 | False | None | None | False | None | False | 432300.0 | 0 | | 3959498 | 153430 | None | ITEM42 | STAINLESS STEEL MAIN DRAIN:- Made out of Stainless Steel sheet ( 16 guage x 304 guage with Stainless Steel circles and and Stainless steel bolts etc complete including fixing fabricating Turning cutting, rolling, Grainding, Drilling , Buffing etc including transporation , lifting and Unloading inclusive all Taxes HOM of Machinaries , Fabrications , Labour charges etc complete as per additional Technical, Bid Document special specifications enclosed for the succssful completion of the work and as per the directions of the Engineer in charge of work. Main Pool 450mm X 450mm | Nos | 43366.4 | 43366.4 | 2.0 | False | None | None | False | None | False | 86732.8 | 0 | | 3959499 | 153430 | None | ITEM43 | STAINLESS STEEL MAIN DRAIN:- Made out of Stainless Steel sheet ( 16 guage x 304 guage with Stainless Steel circles and and Stainless steel bolts etc complete including fixing fabricating Turning cutting, rolling, Grainding, Drilling , Buffing etc including transporation , lifting and Unloading inclusive all Taxes HOM of Machinaries , Fabrications , Labour charges etc complete as per additional Technical, Bid Document special specifications enclosed for the succssful completion of the work and as per the directions of the Engineer in charge of work. Kids pool 350mm X 350mm | Nos | 35941.4 | 35941.4 | 1.0 | False | None | None | False | None | False | 35941.4 | 0 | | 3959500 | 153430 | None | ITEM44 | FLOOR INLETS:- Providing , Supplying and fixing of Imprted floor Inlet made of ABS Plastic Multiflow and external thread (AQUALUX make) including transporation , lifting and Unloading inclusive all Taxes HOM of Machinaries , Fabrications , Labour charges etc complete as per additional Technical, Bid Document special specifications enclosed for the succssful completion of the work and as per the directions of the Engineer in charge of work. (Data rate approved by Supintending Engineer, PW,PandIWTD Dharwad Circle, Dharwad vide letter No. 343 Dtd: 21-4-2012) | Nos | 2068.0 | 2068.0 | 31.0 | False | None | None | False | None | False | 64108.0 | 0 | | 3959501 | 153430 | None | ITEM45 | S.S. LADDERS FOR 2 STEPS :- Providing Supplying and fixing Stainless Steel ladder OF Standard Design ( 304G) for 3 steps ( SS Pipe of 1.5inch dia x 16guage x 19 dia x 16 guage S.S Sheet of 16 G. S.S Circles , Nylon Flanges S.S Bolts etc including Fabrication labour charges for Cutting, Bending , Embosing and buffing including transporation , lifting and Unloading inclusive all Taxes HOM of Machinaries , Fabrications , Labour charges etc complete as per additional Technical, Bid Document special specifications enclosed for the succssful completion of the work and as per the directions of the Engineer in charge of work. | Nos | 28435.0 | 28435.0 | 2.0 | False | None | None | False | None | False | 56870.0 | 0 | | 3959502 | 153430 | None | ITEM46 | S.S. LADDERS FOR 3 STEPS :- Providing Supplying and fixing Stainless Steel ladder OF Standard Design ( 304G) for 3 steps ( SS Pipe of 1.5inch dia x 16guage x 19 dia x 16 guage S.S Sheet of 16 G. S.S Circles , Nylon Flanges S.S Bolts etc including Fabrication labour charges for Cutting, Bending , Embosing and buffing including transporation , lifting and Unloading inclusive all Taxes HOM of Machinaries , Fabrications , Labour charges etc complete as per additional Technical, Bid Document special specifications enclosed for the succssful completion of the work and as per the directions of the Engineer in charge of work. | Nos | 32560.0 | 32560.0 | 2.0 | False | None | None | False | None | False | 65120.0 | 0 | | 3959503 | 153430 | None | ITEM47 | S.S. LADDERS FOR 5 STEPS :- Providing Supplying and fixing Stainless Steel ladder OF Standard Design ( 304G) for 5 steps ( SS Pipe of 1.5inch dia x 16guage x 19 dia x 16 guage S.S Sheet of 16 G. S.S Circles , Nylon Flanges S.S Bolts etc including Fabrication labour charges for Cutting, Bending , Embosing and buffing including transporation , lifting and Unloading inclusive all Taxes HOM of Machinaries , Fabrications , Labour charges etc complete as per additional Technical, Bid Document special specifications enclosed for the succssful completion of the work and as per the directions of the Engineer in charge of work. | Nos | 40095.0 | 40095.0 | 2.0 | False | None | None | False | None | False | 80190.0 | 0 | | 3959504 | 153430 | None | ITEM48 | TROLLEY SUCTION SWEEPER:- Providing supplying and fixing Trolly Suction Sweeper fabrication of M.S Trolly , with Supply of 2 HP Self priming Pump ( Kirloskar / equivalent make) with prefilter with Starter ( Land T or Eqauivalent) including Fabrication of Stainless steel Suction head fixed with Scrubbing brushes including supply of PVC Flexible Suction hose 30 m Length and Towing rope including transporation , lifting and Unloading, Fabrications , Labour charges etc complete as per additional Technical, Bid Document special specifications enclosed for the succssful completion of the work and as per the directions of the Engineer in charge of work. | Set | 152515.0 | 152515.0 | 1.0 | False | None | None | False | None | False | 152515.0 | 0 | | 3959505 | 153430 | None | ITEM49 | LEAF RAKE:- Providing Supplying of Lead Rake made out of alluminium pipe of Standard make and Deep bag net in Nylon including transporation , lifting and Unloading inclusive all Taxes HOM of Machinaries , Fabrications , Labour charges etc complete as per additional Technical, Bid Document special specifications enclosed for the succssful completion of the work and as per the directions of the Engineer in charge of work. (Data rate approved by Supintending Engineer, PW,PandIWTD Dharwad Circle, Dharwad vide letter No. 343 Dtd: 21-4-2012) | Nos | 4126.1 | 4126.1 | 1.0 | False | None | None | False | None | False | 4126.1 | 0 | | 3959506 | 153430 | None | ITEM50 | TEST KIT :- Providing supplying Test Kit to check free Chlorine and PH of the Swimming pool water including transporation , lifting and Unloading inclusive all Taxes HOM of Machinaries , Fabrications , Labour charges etc complete as per additional Technical, Bid Document special specifications enclosed for the succssful completion of the work and as per the directions of the Engineer in charge of work. | Nos | 3630.0 | 3630.0 | 1.0 | False | None | None | False | None | False | 3630.0 | 0 | | 3959507 | 153430 | None | ITEM51 | Chemical for Start up :- Providing Supplying of Trichloroisocyanuric acid (TCCA90) including transporation , lifting and Unloading inclusive all Taxes complete as per additional Technical, Bid Document special specifications enclosed for the succssful completion of the work and as per the directions of the Engineer in charge of work. | Kg | 852.5 | 852.5 | 200.0 | False | None | None | False | None | False | 170500.0 | 0 | | 3959508 | 153430 | None | ITEM52 | POOL BRUSH ( FOR WALL and FLOOR):- Providing Supplying of Pool brush ( for wall and Floor ) of Stainless Steel body with Nylon Bristle including transporation , lifting and Unloading inclusive all Taxes HOM of Machinaries , Fabrications , Labour charges etc complete as per additional Technical, Bid Document special specifications enclosed for the succssful completion of the work and as per the directions of the Engineer in charge of work. | Nos | 2750.0 | 2750.0 | 2.0 | False | None | None | False | None | False | 5500.0 | 0 | | 3959509 | 153430 | None | ITEM53 | P.P GRATINGS ( MILKY WHITE):- Supplying and fixing PP Gratings ( Milky white) over flow gutter gratings made of Polyprolene materials of standard size and diamentions used for swimming pools including transporation , lifting and Unloading inclusive all Taxes HOM of Machinaries , Fabrications , Labour charges etc complete as per additional Technical, Bid Document special specifications enclosed for the succssful completion of the work and as per the directions of the Engineer in charge of work. | m | 2552.0 | 2552.0 | 84.0 | False | None | None | False | None | False | 214368.0 | 0 | | 3959510 | 153430 | None | ITEM54 | SS HAND RAIL Providing fixing errecting fabricating S.S Handrails of 1 1/2 inch dia x 16 guage x 304 g. pipe using SS Circles and fixed to the swimming pool wall with S.S Achoring bolts for 1 Rft including transporation , lifting and Unloading inclusive all Taxes HOM of Machinaries , Fabrications , Labour charges etc complete as per additional Technical, Bid Document special specifications enclosed for the succssful completion of the work and as per the directions of the Engineer in charge of work. Long wall | m | 2985.0 | 2985.0 | 50.0 | False | None | None | False | None | False | 149250.0 | 0 | | 3959511 | 153430 | None | ITEM55 | SS RINGS FOR LANE SEPARATOR:- Providing Supplying SS. Rings for Lane separator fabricated in 4inch dia x 16 G x 304 G Pipe with S.S Rod including transporation , lifting and Unloading inclusive all Taxes HOM of Machinaries , Fabrications , Labour charges etc complete as per additional Technical, Bid Document special specifications enclosed for the succssful completion of the work and as per the directions of the Engineer in charge of work. | Nos | 3355.0 | 3355.0 | 18.0 | False | None | None | False | None | False | 60390.0 | 0 | | 3959512 | 153430 | None | ITEM56 | PLUMBING - All allied fixtures and fittings Complete for complete working of the swimming pool. All items to be of IS standard and reputed make. | Unit | 231000.0 | 231000.0 | 1.0 | False | None | None | False | None | False | 231000.0 | 0 | | 3959513 | 153430 | None | ITEM57 | Line separator(Float lane) | m | 2255.0 | 2255.0 | 225.0 | False | None | None | False | None | False | 507375.0 | 0 | | 3959514 | 153430 | None | ITEM58 | Starting block for swimming pool [improved Stainless steel with fiber] | Nos | 36740.0 | 36740.0 | 8.0 | False | None | None | False | None | False | 293920.0 | 0 | | 3959515 | 153430 | None | ITEM59 | INSTALLATION :- Installation of all the equipments for the purpose of functioning of swimming pool with necessary staff men material labours, including transportation, lifting and unloading inclusive all taxes HOM of machineries, fabrications, labour charges etc., complete as per additional technical Bid document special specification enclosed for the successful completion of the work and as per the directions for the Engineering in charge of the work | Nos | 120000.0 | 120000.0 | 2.0 | False | None | None | False | None | False | 240000.0 | 0 | | 3959516 | 153430 | None | ITEM60 | Providing and installing at site of work PVC pipes of 10kg/sqcm including cost of pipes and fittings like elbow, bend, collar, tee etc. and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak proof including jointing of approved type with all labour charges and all lift charges, all conveyance charges, handling charges etc. complete 63mm dia pipe | m | 495.0 | 495.0 | 60.0 | False | None | None | False | None | False | 29700.0 | 0 | | 3959517 | 153430 | None | ITEM61 | Providing and installing at site of work PVC pipes of 10kg/sqcm including cost of pipes and fittings like elbow, bend, collar, tee etc. and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak proof including jointing of approved type with all labour charges and all lift charges, all conveyance charges, handling charges etc. complete 75mm dia pipe | m | 814.0 | 814.0 | 70.0 | False | None | None | False | None | False | 56980.0 | 0 | | 3959518 | 153430 | None | ITEM62 | Providing and installing at site of work PVC pipes of 10kg/sqcm including cost of pipes and fittings like elbow, bend, collar, tee etc. and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak proof including jointing of approved type with all labour charges and all lift charges, all conveyance charges, handling charges etc. complete 90mm dia pipe | m | 1210.0 | 1210.0 | 160.0 | False | None | None | False | None | False | 193600.0 | 0 | | 3959519 | 153430 | None | ITEM63 | Providing and installing at site of work PVC pipes of 10kg/sqcm including cost of pipes and fittings like elbow, bend, collar, tee etc. and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak proof including jointing of approved type with all labour charges and all lift charges, all conveyance charges, handling charges etc. complete 110mm dia pipe | m | 1386.0 | 1386.0 | 285.0 | False | None | None | False | None | False | 395010.0 | 0 | | 3959520 | 153430 | None | ITEM64 | Providing and installing at site of work PVC pipes of 10kg/sqcm including cost of pipes and fittings like elbow, bend, collar, tee etc. and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak proof including jointing of approved type with all labour charges and all lift charges, all conveyance charges, handling charges etc. complete 140mm dia pipe | m | 1782.0 | 1782.0 | 20.0 | False | None | None | False | None | False | 35640.0 | 0 | | 3959521 | 153430 | None | ITEM65 | Providing and installing at site of work PVC pipes of 10kg/sqcm including cost of pipes and fittings like elbow, bend, collar, tee etc. and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak proof including jointing of approved type with all labour charges and all lift charges, all conveyance charges, handling charges etc. complete 200mm dia pipe | m | 2266.0 | 2266.0 | 83.0 | False | None | None | False | None | False | 188078.0 | 0 | | 3959522 | 153430 | None | ITEM66 | Commissioning the pool and traning for 1 week about pool maintenance | Nos | 75000.0 | 75000.0 | 2.0 | False | None | None | False | None | False | 150000.0 | 0 | | 3959523 | 153430 | None | ITEM67 | Control panel board which includes Fabricated MS Powder coated box, with the fixtures like MCB, ammeter, volt meter, etc. complete | No | 70000.0 | 70000.0 | 1.0 | False | None | None | False | None | False | 70000.0 | 0 | | 3959524 | 153430 | None | ITEM68 | Supplying heavy gauge PVC conduit pipe 25 mm dia 2 mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary. (Sl.No.1., Item No.1.2.2, Page No.2 , PWD Ele SR 2 2023-2024). | m | 78.0 | 78.0 | 301.0 | False | None | None | False | None | False | 23478.0 | 0 | | 3959525 | 153430 | None | ITEM69 | Supplying heavy gauge PVC conduit pipe 19/20 mm dia 2 mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted wood plugs in case of RCC ceiling and RCC wall/ stone structure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws. (Sl.No.1, Item No.1.1.1, Page No.2 , PWD Ele SR 2 2023-2024). | m | 69.0 | 69.0 | 491.0 | False | None | None | False | None | False | 33879.0 | 0 | | 3959526 | 153430 | None | ITEM70 | Supplying and fixing sheet Metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc.200 x 200 x 65 mm. (Sl.No.1., Item No.1.4.7, Page No.2 , PWD Ele SR 2 2023-2024). | Each | 348.0 | 348.0 | 2.0 | False | None | None | False | None | False | 696.0 | 0 | | 3959527 | 153430 | None | ITEM71 | Supplying and fixing sheet Metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc.200 x 200 x 65 mm. (Sl.No.1., Item No.1.4.7, Page No.2 , PWD Ele SR 2 2023-2024). | Each | 348.0 | 348.0 | 2.0 | False | None | None | False | None | False | 696.0 | 0 | | 3959528 | 153430 | None | ITEM72 | Supplying and fixing PVC/metal conduit Deep junction box. (Sl.No.1., Item No.1.5.2, Page No.2 , PWD Ele SR 2 2023-2024). | Each | 56.0 | 56.0 | 2.0 | False | None | None | False | None | False | 112.0 | 0 | | 3959529 | 153430 | None | ITEM73 | Supplying And Fixing Metal Fan Box with Round Hook.(Sl.No.1, Item No.1.13, Page No.4 , PWD Ele SR 2 2023-2024). | No | 117.0 | 117.0 | 10.0 | False | None | None | False | None | False | 1170.0 | 0 | | 3959530 | 153430 | None | ITEM74 | Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5mm2 (Phase and Neutral) and 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Short Point upto 3 ms from tapping point to outlet via switch box. (Sl.No.2., Item No.2.2.1, Page No.5 , PWD Ele SR 2 2023-2024). | Point | 269.0 | 269.0 | 15.0 | False | None | None | False | None | False | 4035.0 | 0 | | 3959531 | 153430 | None | ITEM75 | Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5mm2 (Phase and Neutral) and 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Medium point above 3m upto 6m from tapping point to out let via switch box. (Sl.No.2, Item No.2.2.2, Page No.5 , PWD Ele SR 2 2023-2024). | Point | 379.0 | 379.0 | 16.0 | False | None | None | False | None | False | 6064.0 | 0 | | 3959532 | 153430 | None | ITEM76 | Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5mm2 (Phase and Neutral) and 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Long point above 6m upto 10m from tapping point to out let via switch box. (Sl.No.2, Item No.2.2.3, Page No.5, PWD Ele SR 2 2023-2024). | Point | 555.0 | 555.0 | 35.0 | False | None | None | False | None | False | 19425.0 | 0 | | 3959533 | 153430 | None | ITEM77 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 1.5 mm2. (Sl.No.2, Item No.2.3.2, Page No5 , PWD Ele SR 2 2023-2024). | m | 26.0 | 26.0 | 312.0 | False | None | None | False | None | False | 8112.0 | 0 | | 3959534 | 153430 | None | ITEM78 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 2.5 mm2. (Sl.No.2, Item No.2.3.3, Page No5, PWD Ele SR 2 2023-2024). | m | 42.0 | 42.0 | 468.0 | False | None | None | False | None | False | 19656.0 | 0 | | 3959535 | 153430 | None | ITEM79 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 4mm2. (Sl.No.2, Item No.2.3.4, Page No5, PWD Ele SR 2 2023-2024). | m | 63.0 | 63.0 | 234.0 | False | None | None | False | None | False | 14742.0 | 0 | | 3959536 | 153430 | None | ITEM80 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 6mm2. (Sl.No.2, Item No.2.3.5, Page No5, PWD Ele SR 2 2023-2024). | m | 92.0 | 92.0 | 63.0 | False | None | None | False | None | False | 5796.0 | 0 | | 3959537 | 153430 | None | ITEM81 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 10mm2. (Sl.No.2, Item No.2.3.6, Page No. 6, PWD Ele SR 2 2023-2024). | m | 167.0 | 167.0 | 78.0 | False | None | None | False | None | False | 13026.0 | 0 | | 3959538 | 153430 | None | ITEM82 | Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for working voltage upto 1100V as per IS- 694:2010. (Sl.No.2, Item No.2.5.8, Page No6, PWD Ele SR 2 2023-2024). | m | 113.0 | 113.0 | 156.0 | False | None | None | False | None | False | 17628.0 | 0 | | 3959539 | 153430 | None | ITEM83 | Supplying, Wiring and Fixing Earth electrode for Grounding conduits,I.C.cutouts and other equipments on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 m. Long buried in a pit..The pit should be filled with equal proportion of salt and charcoal 150mm alround the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI wire of size asper ISI specification 7.3.3 of IS 732 using 12mm dia bolts,nuts,washers and checknuts etc, the pipe shall have 16 through holes of 12mm dia.(Sl.No.12, Item No.12.57, Page No.54, PWD Ele SR 2 2023-2024). | No | 3510.0 | 3510.0 | 2.0 | False | None | None | False | None | False | 7020.0 | 0 | | 3959540 | 153430 | None | ITEM84 | Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/NF screws etc., complete. 4-5 Way. (Sl.No.3, Item No.3.3.3, Page No.8, PWD Ele SR 2 2023-2024). | Each | 137.0 | 137.0 | 2.0 | False | None | None | False | None | False | 274.0 | 0 | | 3959541 | 153430 | None | ITEM85 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. 4-5 Way. (Sl.No.3, Item No.3.4.3, Page No.8, PWD Ele SR 2 2023-2024). | Each | 177.0 | 177.0 | 2.0 | False | None | None | False | None | False | 354.0 | 0 | | 3959542 | 153430 | None | ITEM86 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 4Module. (Sl.No.3, Item No.3.5.3, Page No.8, PWD Ele SR 2 2023-2024). | Each | 175.0 | 175.0 | 2.0 | False | None | None | False | None | False | 350.0 | 0 | | 3959543 | 153430 | None | ITEM87 | Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/NF screws etc., complete. 8 Way. (Sl.No.3, Item No.3.3.5, Page No.8, PWD Ele SR 2 2023-2024). | Each | 219.0 | 219.0 | 4.0 | False | None | None | False | None | False | 876.0 | 0 | | 3959544 | 153430 | None | ITEM88 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. 8 Way. (Sl.No.3, Item No.3.4.5, Page No.8, PWD Ele SR 2 2023-2024). | Each | 261.0 | 261.0 | 4.0 | False | None | None | False | None | False | 1044.0 | 0 | | 3959545 | 153430 | None | ITEM89 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 8 Module. (Sl.No.3, Item No.3.5.5, Page No.8, PWD Ele SR 2 2023-2024). | Each | 284.0 | 284.0 | 4.0 | False | None | None | False | None | False | 1136.0 | 0 | | 3959546 | 153430 | None | ITEM90 | Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/NF screws etc., complete. 10-12Way. (Sl.No.3, Item No.3.3.6, Page No.8, PWD Ele SR 2 2023-2024). | Each | 261.0 | 261.0 | 2.0 | False | None | None | False | None | False | 522.0 | 0 | | 3959547 | 153430 | None | ITEM91 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. 10-12Way. (Sl.No.3, Item No.3.4.6, Page No.8, PWD Ele SR 2 2023-2024). | Each | 319.0 | 319.0 | 2.0 | False | None | None | False | None | False | 638.0 | 0 | | 3959548 | 153430 | None | ITEM92 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 10-12 Module. (Sl.No.3, Item No.3.5.6, Page No.8, PWD Ele SR 2 2023-2024). | Each | 344.0 | 344.0 | 2.0 | False | None | None | False | None | False | 688.0 | 0 | | 3959549 | 153430 | None | ITEM93 | Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/NF screws etc., complete. 16 Way. (Sl.No.3, Item No.3.3.7, Page No.8, PWD Ele SR 2 2023-2024). | Each | 294.0 | 294.0 | 2.0 | False | None | None | False | None | False | 588.0 | 0 | | 3959550 | 153430 | None | ITEM94 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. 16Way. (Sl.No.3, Item No.3.4.7, Page No.8, PWD Ele SR 2 2023-2024). | Each | 363.0 | 363.0 | 2.0 | False | None | None | False | None | False | 726.0 | 0 | | 3959551 | 153430 | None | ITEM95 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 16 Module. (Sl.No.3, Item No.3.5.7, Page No.8, PWD Ele SR 2 2023-2024). | Each | 397.0 | 397.0 | 2.0 | False | None | None | False | None | False | 794.0 | 0 | | 3959552 | 153430 | None | ITEM96 | Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/NF screws etc., complete. 18 Way. (Sl.No.3, Item No.3.3.8, Page No.8, PWD Ele SR 2 2023-2024). | Each | 339.0 | 339.0 | 1.0 | False | None | None | False | None | False | 339.0 | 0 | | 3959553 | 153430 | None | ITEM97 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. 18Way. (Sl.No.3, Item No.3.4.8, Page No.8, PWD Ele SR 2 2023-2024). | Each | 405.0 | 405.0 | 1.0 | False | None | None | False | None | False | 405.0 | 0 | | 3959554 | 153430 | None | ITEM98 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 18 Module. (Sl.No.3, Item No.3.5.8, Page No.8, PWD Ele SR 2 2023-2024). | Each | 457.0 | 457.0 | 1.0 | False | None | None | False | None | False | 457.0 | 0 | | 3959555 | 153430 | None | ITEM99 | Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A One way Switch. (Sl.No.3, Item No.3.6.1, Page No.9, PWD Ele SR 2 2023-2024). | Each | 102.0 | 102.0 | 62.0 | False | None | None | False | None | False | 6324.0 | 0 | | 3959556 | 153430 | None | ITEM100 | Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A Three way Socket. (Sl.No.3, Item No.3.6.3, Page No.9, PWD Ele SR 2 2023-2024). | Each | 171.0 | 171.0 | 8.0 | False | None | None | False | None | False | 1368.0 | 0 | | 3959557 | 153430 | None | ITEM101 | Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293.Stepped Fan Regulator Two Module. (Sl.No.3, Item No.3.6.4, Page No.9, PWD Ele SR 2 2023-2024). | Each | 357.0 | 357.0 | 10.0 | False | None | None | False | None | False | 3570.0 | 0 | | 3959558 | 153430 | None | ITEM102 | Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293.16A One way Switch.(Sl.No.3, Item No.3.6.7, Page No.9, PWD Ele SR 2 2023-2024). | Each | 180.0 | 180.0 | 2.0 | False | None | None | False | None | False | 360.0 | 0 | | 3959559 | 153430 | None | ITEM103 | Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293.32A DP switch.(Sl.No.3, Item No.3.6.9, Page No.9, PWD Ele SR 2 2023-2024). | Each | 326.0 | 326.0 | 1.0 | False | None | None | False | None | False | 326.0 | 0 | | 3959560 | 153430 | None | ITEM104 | Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6/16A Universal Socket.(Sl.No.3, Item No.3.6.10, Page No.9, PWD Ele SR 2 2023-2024). | Each | 236.0 | 236.0 | 1.0 | False | None | None | False | None | False | 236.0 | 0 | | 3959561 | 153430 | None | ITEM105 | Supplying and fixing of metal clad industrial plugs and sockets.3pole+earth 440V PLUG (Sl.No.3, Item No.3.13.4, Page No.9, PWD Ele SR 2 2023-2024). | Each | 609.86 | 609.86 | 2.0 | False | None | None | False | None | False | 1219.72 | 0 | | 3959562 | 153430 | None | ITEM106 | Supplying and fixing of metal clad industrial plugs and sockets.3pole+earth 440V SOCKET (Sl.No.3, Item No.3.13.8, Page No.9, PWD Ele SR 2 2023-2024). | Each | 827.82 | 827.82 | 2.0 | False | None | None | False | None | False | 1655.64 | 0 | | 3959563 | 153430 | None | ITEM107 | Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board. 6A Bakelite Ceiling Rose.(Sl.No.3, Item No.3.14.5, Page No.9, PWD Ele SR 2 2023-2024). | Each | 78.0 | 78.0 | 75.0 | False | None | None | False | None | False | 5850.0 | 0 | | 3959564 | 153430 | None | ITEM108 | Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board. 6A Batten Holder.(Sl.No.3, Item No.3.14.7, Page No.9, PWD Ele SR 2 2023-2024). | Each | 74.0 | 74.0 | 30.0 | False | None | None | False | None | False | 2220.0 | 0 | | 3959565 | 153430 | None | ITEM109 | Supply and fixing polished wood board made of not less than 15mm thick plank on both sides of not more than 2 pieces and fixing the same to the wall using tapered inverted wooden plugs screws. 20inch x 20inch x 2.5inch(Sl.No.5, Item No.5.6.6, Page No.14, PWD Ele SR 2 2023-2024). | Each | 326.13 | 326.13 | 1.0 | False | None | None | False | None | False | 326.13 | 0 | | 3959566 | 153430 | None | ITEM110 | Supplying and fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers.63A(Sl.No.5, Item No.5.7.3, Page No.14, PWD Ele SR 2 2023-2024). | Each | 401.0 | 401.0 | 2.0 | False | None | None | False | None | False | 802.0 | 0 | | 3959567 | 153430 | None | ITEM111 | Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 40 A DP (Sl.No.5, Item No.5.18.5, Page No.17, PWD Ele SR 2 2023-2024). | Each | 1060.0 | 1060.0 | 1.0 | False | None | None | False | None | False | 1060.0 | 0 | | 3959568 | 153430 | None | ITEM112 | Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 50-63 A TPN.(Sl.No.5, Item No.5.18.9, Page No.18, PWD Ele SR 2 2023-2024). | Each | 3088.0 | 3088.0 | 2.0 | False | None | None | False | None | False | 6176.0 | 0 | | 3959569 | 153430 | None | ITEM113 | Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clA, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS enclosure.II - Double Door. 4 Way SP and N. (Sl.No.5, Item No.5.19.6, Page No.18, PWD Ele SR 2 2023-2024). | Each | 1524.0 | 1524.0 | 2.0 | False | None | None | False | None | False | 3048.0 | 0 | | 3959570 | 153430 | None | ITEM114 | Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clA, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS enclosure.II - Double Door. 8 Way SP and N. (Sl.No.5, Item No.5.19.6, Page No.18, PWD Ele SR 2 2023-2024). | Each | 1854.0 | 1854.0 | 1.0 | False | None | None | False | None | False | 1854.0 | 0 | | 3959571 | 153430 | None | ITEM115 | Supplying, fixing and wiring rotary selector switch suitable for Ammeter. (Sl.No.5, Item No.5.27, Page No.19, PWD Ele SR 2 2023-2024). | Each | 200.0 | 200.0 | 1.0 | False | None | None | False | None | False | 200.0 | 0 | | 3959572 | 153430 | None | ITEM116 | Supplying, fixing and wiring rotary selector switch suitable for Voltmeter. (Sl.No.5, Item No.5.28, Page No.19, PWD Ele SR 2 2023-2024). | Each | 160.0 | 160.0 | 2.0 | False | None | None | False | None | False | 320.0 | 0 | | 3959573 | 153430 | None | ITEM117 | Supplying, fixing and wiring 3 Phase Digital Ammeter / Voltmeter. (Sl.No.5, Item No.5.29, Page No.19, PWD Ele SR 2 2023-2024). | Each | 1425.0 | 1425.0 | 2.0 | False | None | None | False | None | False | 2850.0 | 0 | | 3959574 | 153430 | None | ITEM118 | Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 32/63 A three phase 4 wire whole current class-1 Accuracy Energy Meter. (Sl.No.5, Item No.5.35, Page No.19, PWD Ele SR 2 2023-2024). | Each | 5705.0 | 5705.0 | 1.0 | False | None | None | False | None | False | 5705.0 | 0 | | 3959575 | 153430 | None | ITEM119 | Supplying, fixing and wiring heavy duty low voltage capacitors conforming to IS 2834. 3 phase, 400/440 V grade, for power factor improvement of rotating machineries like induction motor.(Sl.No.5, Item No.5.37, Page No.19, PWD Ele SR 2 2023-2024). | Kvar | 480.0 | 480.0 | 4.0 | False | None | None | False | None | False | 1920.0 | 0 | | 3959576 | 153430 | None | ITEM120 | Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C.(Sl.No.5, Item No.5.38, Page No.19, PWD Ele SR 2 2023-2024). | Each | 515.0 | 515.0 | 10.0 | False | None | None | False | None | False | 5150.0 | 0 | | 3959577 | 153430 | None | ITEM121 | Supplying 100 A 4 x 30 x 6 mm Aluminium Strips rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete. (Sl.No.5, Item No.5.40.1, Page No.20, PWD Ele SR 2 2023-2024). | m | 2465.0 | 2465.0 | 2.0 | False | None | None | False | None | False | 4930.0 | 0 | | 3959578 | 153430 | None | ITEM122 | Fabricating supplying and mounting MS box made out 16SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clA with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour etc., complete. (Sl.No.5, Item No.5.40.1, Page No.20, PWD Ele SR 2 2023-2024). | Sq CM | 0.43 | 0.43 | 7500.0 | False | None | None | False | None | False | 3225.0 | 0 | | 3959579 | 153430 | None | ITEM123 | Supply and Installation / Fixing / Provision of Outdoor type Thermoplastic Modular Panel enclosure with transparent Polycarbonate Lid, shock proof, IP65 (Weather Proof), rust proof, dust proof, water proof, corrosion proof having internally Embedded gasket on both lid and flap suitable to fix Single Phase / Three Phase Energy Meter in suitable base plate and having a provision for Fuse / MCB cut-out with suitable transparent hinged flap opening for operating MCB along with complete tamper proof SEALING facility.300 mm x 600 mm x 170 mm(Sl.No.5, Item No.5.44.3, Page No.21, PWD Ele SR 2 2023-2024). | Each | 6867.0 | 6867.0 | 1.0 | False | None | None | False | None | False | 6867.0 | 0 | | 3959580 | 153430 | None | ITEM124 | Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball bearing system.(Sl.No.11, Item No.11.3.2, Page No.43 , PWD Ele SR 2 2023-2024). | Each | 2984.0 | 2984.0 | 10.0 | False | None | None | False | None | False | 29840.0 | 0 | | 3959581 | 153430 | None | ITEM125 | Fixing a ceiling /wall mounting fan of all capacities and all types, with necessary clA and 'S' hook made out of 15mm dia MS rod, with 5 A. ceiling rose of approved quality with necessary length of 23/0.0076 inch PVC insulated twin twisted wire of approved quality, mounted on a suitable size wooden board and wired. (Sl.No.13, Item No.13.11, Page No.57, PWD Ele SR 2 2023-2024). | Each | 315.0 | 315.0 | 10.0 | False | None | None | False | None | False | 3150.0 | 0 | | 3959582 | 153430 | None | ITEM126 | Supplying of LED light fitting 1 x 4' - 36/40 W -PVC Batten with high quality diffuser with Life of 25000 burning hours and 70percent lumen maintenance with CRI greater than 80. Power Input: 220-240Vat 50/60Hz and Power factor greater than 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition.(Sl.No.11, Item No.11.3.2, Page No.43 , PWD Ele SR 2 2023-2024). | Each | 1269.0 | 1269.0 | 16.0 | False | None | None | False | None | False | 20304.0 | 0 | | 3959583 | 153430 | None | ITEM127 | Supply of 200W LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output Rated life Burning Hrs 50000 hr at Lumen Maintenance of 70PERCENT, maximum light intensity should be between 60 degrees to 70 degrees. CCT greater than 5500K, IP66 optical and electrical compartment and impact resistance of complete luminaire greater than IK08. Power Factor greater than 0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mounting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 and LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with 200W System Power consumption. LED Efficiency greater than1301m/w, nominal CRI greater than75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI and any Government certified agency and Design and Development facility certified by ISO 9001:2008. Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect(Sl.No.11, Item No.11.8.8, Page No.45 , PWD Ele SR 2 2023-2024). | Each | 19094.0 | 19094.0 | 3.0 | False | None | None | False | None | False | 57282.0 | 0 | | 3959584 | 153430 | None | ITEM128 | Supplying and Fixing 32.mm dia class A GI pipe bracket upto 2.7 meters long terminated with a reducing collar of 40x25mm to which extra pipe of 175mm length is fixed for fixing MV/SV/MH/FTL street light fitting of all capacities on rail/RCC/wall/tubular pole, using suitable clA, bolts, nuts and wiring using suitable capacity wires. (Sl.No.13, Item No.13.2.2, Page No.56, PWD Ele SR 2 2023-2024). | Each | 1295.0 | 1295.0 | 2.0 | False | None | None | False | None | False | 2590.0 | 0 | | 3959585 | 153430 | None | ITEM129 | Fixing halogen/metal halide /SVL/IL/LED floodlight fitting over existing pole / wall ceiling including clA, bolts, nuts and wiring using suitable capacity wires.. (Sl.No.13, Item No.13.5, Page No.56, PWD Ele SR 2 2023-2024). | Each | 162.0 | 162.0 | 2.0 | False | None | None | False | None | False | 324.0 | 0 | | 3959586 | 153430 | None | ITEM130 | Fixing all types and all capacities of 1'x4' / 2'x2' LED Light fittings indoor on the wall / ceiling / rafters / girders with necessary supporting frame, using 2310.0076inch twin twisted PVC insulated wires, required Nos of round blocks and clA. (Sl.No.13, Item No.13.19, Page No.58, PWD Ele SR 2 2023-2024). | Each | 490.0 | 490.0 | 16.0 | False | None | None | False | None | False | 7840.0 | 0 | | 3959587 | 153430 | None | ITEM131 | Erection of single phase preventer / ammeters / including fixing selector switch / voltmeter / current operated earth leakage circuit breakers / voltage operated circuit breaker / above 100A fuse channel set (3 Nos) HRC fuses above100A (3 Nos.) / Digital ammeter/digital volt meter/set of3 indicating lA /MCB / Relays /A-V selector switches including wiring using suitable capacity wires, bolts, nuts, screws. (Sl.No.13, Item No.13.16, Page No.57, PWD Ele SR 2 2023-2024). | Each | 198.0 | 198.0 | 8.0 | False | None | None | False | None | False | 1584.0 | 0 | | 3959588 | 153430 | None | ITEM132 | 1.1 kV,XLPE or Heat resistant PVC insulated, PVC exutruted Inner sheathed armoured LYUG cable as per IS -1554(Part 1 )or IS 7098 Part-1, Armouring strip thickeness and resistivity as per IS-3975. (Sl.No.204, Item No.32.08, Page No.13, ESCOMs SR 2 2023-2024). | Km | 179844.0 | 179844.0 | 0.26 | False | None | None | False | None | False | 46759.44 | 0 | | 3959589 | 153430 | None | ITEM133 | Epoxy Terminating kit (Pot head) suitable for 1.1kV, LT UG Cable.(Sl.No.249, Item No.35.01, Page No.15, ESCOMs SR 2 2023-2024). | Set | 324.0 | 324.0 | 1.0 | False | None | None | False | None | False | 324.0 | 0 | | 3959590 | 153430 | None | ITEM134 | Laying of cable in existing trench/ GI pipe/ Stone ware/ RCC Hume pipe using wooden/ Aluminium rollers as directed by the department staff. LT Cable. 2.5 to 25Sqmm. (Sl.No.174, Item No.21.05, Page No.52, ESCOMs SR 2 2023-2024). | Km | 20886.0 | 20886.0 | 0.26 | False | None | None | False | None | False | 5430.36 | 0 | | 3959591 | 153430 | None | ITEM135 | Earth work excavation by manual means for drains waste weir, draft approach channels, key trenches foundation of building and bridge and such canals and similar works in all kinds of soils , as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, re- moval of stumps and other deleterious matter, excavated surface lev- eled and sides neatly dressed disposing off the excavated stuff or sort- ing and stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools and other appurtenaces required to complete the work In all kinds of soils Depth upto 1.5 m P.NO.5 I.NO.1.4.1 VOL-1 CSR 2023-24 | Cum | 266.2 | 266.2 | 175.0 | False | None | None | False | None | False | 46585.0 | 0 | | 3959592 | 153430 | None | ITEM136 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled-device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required (Vol -2 IT no-14.1.1 Pg no- 131,) | Nos | 5030.52 | 5030.52 | 4.0 | False | None | None | False | None | False | 20122.08 | 0 | | 3959593 | 153430 | None | ITEM137 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern and C.P. flush bend with fittings and C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required (Vol -2 IT no-14.3.1 Pg no- 131,) | Nos | 6156.31 | 6156.31 | 4.0 | False | None | None | False | None | False | 24625.24 | 0 | | 3959594 | 153430 | None | ITEM138 | Providing and fixing wash basin with C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require (Vol-2 It no-14.7.1 Pg no-132) | Nos | 3174.46 | 3174.46 | 6.0 | False | None | None | False | None | False | 19046.76 | 0 | | 3959595 | 153430 | None | ITEM139 | Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required (Vol-2 It no-14.5.2 Pg no-132) | Nos | 13331.29 | 13331.29 | 3.0 | False | None | None | False | None | False | 39993.87 | 0 | | 3959596 | 153430 | None | ITEM140 | Providing and fixing Bib cock with wall flange made of Stainless steel with all concealed fitting arrangements and all necessary accesories complete - Clas (Vol-2 It no-14.55 Pg no-139) | Nos | 2498.78 | 2498.78 | 23.0 | False | None | None | False | None | False | 57471.94 | 0 | | 3959597 | 153430 | None | ITEM141 | Providing and fixing Exposed set for concealed stop cock made of Stainless steel with all concealed fitting arrangements and all necessary accesories complete - Class (Vol-2 It no-14.67 Pg no-141) | Nos | 883.74 | 883.74 | 15.0 | False | None | None | False | None | False | 13256.1 | 0 | | 3959598 | 153430 | None | ITEM142 | Providing and fixing PVC (S.W.R) Nahani Trap 10cms x 10cms with all fitting arrangements and all necessary accessories complete (Vol-2 It no-13.59 Pg no-127) | Nos | 226.6 | 226.6 | 34.0 | False | None | None | False | None | False | 7704.4 | 0 | | 3959599 | 153430 | None | ITEM143 | Providing and fixing Pillar cock with high neck with 265mm Extended body made of Stainless steel with all concealed fitting arrangements and all necessary accesories complete - Class (Vol-2 It no-14.51 Pg no-139) | Nos | 4976.96 | 4976.96 | 6.0 | False | None | None | False | None | False | 29861.76 | 0 | | 3959600 | 153430 | None | ITEM144 | Providing and fixing PTMT, push cock of approved quality and colour.(Vol-2 It no-13.21.1 Pg no-120) | Nos | 131.84 | 131.84 | 3.0 | False | None | None | False | None | False | 395.52 | 0 | | 3959601 | 153430 | None | ITEM145 | Providing and fixing Overhead rain showers of minimum dimension 225x225mm and wall flange made of Stainless steel with all concealed fitting arrangements and all necessary accesories complete - Class (Vol-2 It no-14.81.b Pg no-120) | Nos | 6123.35 | 6123.35 | 15.0 | False | None | None | False | None | False | 91850.25 | 0 | | 3959602 | 153430 | None | ITEM146 | Providing and fixing 20mm dia chorinated poly vinyl Chloride (CPVC) pipes conforming to IS 15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete. (Concealed work including cutting chases and making good walls). [P-100,13.86.2]-2018-19 | m | 290.46 | 290.46 | 100.0 | False | None | None | False | None | False | 29046.0 | 0 | | 3959603 | 153430 | None | ITEM147 | Providing and fixing 25mm dia chorinated poly vinyl Chloride (CPVC) pipes conforming to IS 15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete. (Concealed work including cutting chases and making good walls). [P-100,13.86.3]-2018-19 | m | 362.15 | 362.15 | 150.0 | False | None | None | False | None | False | 54322.5 | 0 | | 3959604 | 153430 | None | ITEM148 | Making soak pit 2.5 m diameter 3.0 m deep with 45 x 45 cm dry brick honey comb shaft with bricks and PVC S.W.R drain pipe 100 mm diameter, 1.8 m long complete as per standard design.With common burnt clay (non modular) bricks of class designation 3.5 (Vol-2 It no-13.56 Pg no-127) | Nos | 23714.72 | 23714.72 | 2.0 | False | None | None | False | None | False | 47429.44 | 0 | | 3959605 | 153430 | None | ITEM149 | Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead and lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. complete For: 110mm (Vol-5 It no-10.1.7 Pg no-113) | m | 423.33 | 423.33 | 86.0 | False | None | None | False | None | False | 36406.38 | 0 | | 3959606 | 153430 | None | ITEM150 | Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead and lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. complete For: 75 mm ( Vol-5 It no-10.1.5 Pg no-113) | m | 226.6 | 226.6 | 279.0 | False | None | None | False | None | False | 63221.4 | 0 | | 3959607 | 153430 | None | ITEM151 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. (Vol-2 It no-13.34 Pg no-123) | Ltr | 9.27 | 9.27 | 2000.0 | False | None | None | False | None | False | 18540.0 | 0 | | 3959608 | 153430 | None | ITEM152 | Fixing, installing and testing 15mm CP health faucet of approved make with necessary CP flexible hose 1000mm long nozzle, CP wall flange, CP angle cock etc., complete. MR | Nos | 4620.0 | 4620.0 | 2.0 | False | None | None | False | None | False | 9240.0 | 0 | | 3959609 | 153430 | None | ITEM153 | Providing and fixing Angle cock with wall flange made of Stainless steel with all concealed fitting arrangements and all necessary accessories complete - Class (Vol -2 IT no-14.54 Pg no- 139,) | Nos | 1975.54 | 1975.54 | 14.0 | False | None | None | False | None | False | 27657.56 | 0 |
|