| 1726050175000 | 0 | None | None | Buildings | Providing flooring, Gate, structural steel work and construction of cc road in RK Layout main road in ward no 03 of bommasandra TMC limits. | 1678722.1 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3957965 | 153378 | None | 001 | Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver/grader in sub-base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. Wet Mix Macadam (Plant mix method) (P.No. 26, It.No. 4.17 of CSR 2023-24 Volume 3) | Cum | 2635.77 | 2635.77 | 78.2 | False | None | None | False | None | False | 206117.214 | 0 | | 3957966 | 153378 | None | 002 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:2:4 (M15) Using 20 mm nominal size graded crushed coarse aggregates (P.No. 15, It.No. 2.1.6 of CSR 2023-24 Volume 1) | Cum | 6430.29 | 6430.29 | 28.52 | False | None | None | False | None | False | 183391.8708 | 0 | | 3957967 | 153378 | None | 003 | Providing and constructing un-reinforced plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS:383:2016:, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including construction joints, primer, sealant, curing of concrete slabs for 14-days, and water finishing to lines and grade as per drawing and technical specification clause 1501 with all lead, lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments etc., complete. as per the directions of the Engineer-in-charge of the work.(P.No. 149, It.No. 16.28 of CSR 2023-24 Volume 3) | Cum | 6956.62 | 6956.62 | 58.5 | False | None | None | False | None | False | 406962.27 | 0 | | 3957968 | 153378 | None | 004 | Providing and laying Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand)Light shade pigment using white cement .(P.No. 59, It.No. 9.6.1 of CSR 2023-24 Volume 2) | Cum | 1307.07 | 1307.07 | 117.95 | False | None | None | False | None | False | 154168.9065 | 0 | | 3957969 | 153378 | None | 005 | Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in- Charge. .(P.No. 77, It.No. 11.2 of CSR 2023-24 Volume 2) | Kg | 116.39 | 116.39 | 900.0 | False | None | None | False | None | False | 104751.0 | 0 | | 3957970 | 153378 | None | 006 | Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work.(P.No. 08, It.No. 1.12 of CSR 2023-24 Volume 1) | Cum | 97.85 | 97.85 | 945.0 | False | None | None | False | None | False | 92468.25 | 0 | | 3957971 | 153378 | None | 007 | Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (P.No. 16, It.No. 2.4.2 of CSR 2023-24 Volume 1) | Cum | 6512.69 | 6512.69 | 3.57 | False | None | None | False | None | False | 23250.3033 | 0 | | 3957972 | 153378 | None | 008 | As per recommendations of Technical working group, rates for formwork shall be added on percentage basis to the finished concrete item rate. ( PWD SR 2023-24 Vol:1P.NO.111 I.No: 15) | Cum | 3256.35 | 3256.35 | 3.57 | False | None | None | False | None | False | 11625.1695 | 0 | | 3957973 | 153378 | None | 009 | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification Buildings (P.No. 18, It.No. 2.11a of CSR 2023-24 Volume 1) | Tonne | 92140.71 | 92140.71 | 0.36 | False | None | None | False | None | False | 33170.6556 | 0 | | 3957974 | 153378 | None | 010 | Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints finished with cement mortar 1:3 over existing cement concrete bed , including cost of materials, mortar, labour, curing complete as per specifications. (P.No. 64, It.No. 9.30 of CSR 2023-24 Volume 2) | Sqm | 5487.84 | 5487.84 | 12.27 | False | None | None | False | None | False | 67335.7968 | 0 | | 3957975 | 153378 | None | 011 | Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (P.No. 41, It.No. 8.3.1 of CSR 2023-24 Volume 2) | Sqm | 364.62 | 364.62 | 34.3 | False | None | None | False | None | False | 12506.466 | 0 | | 3957976 | 153378 | None | 012 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing
with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be
considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. (P.No. 85, It.No. 11.28 of CSR 2023-24 Volume 2) | Kg | 581.95 | 581.95 | 187.2 | False | None | None | False | None | False | 108941.04 | 0 | | 3957977 | 153378 | None | 013 | Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. (P.No. 99, It.No. 12.11 of CSR 2023-24 Volume 2) | Cum | 142216.22 | 142216.22 | 0.82 | False | None | None | False | None | False | 116617.3004 | 0 | | 3957978 | 153378 | None | 014 | Providing and fixing in position fully panelled Honne wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. ( excluding cost of fixtures ) (P.No. 100, It.No. 12.15 of CSR 2023-24 Volume 2) | Sqm | 7667.32 | 7667.32 | 15.12 | False | None | None | False | None | False | 115929.8784 | 0 | | 3957979 | 153378 | None | 015 | Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 g/L and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 L/ 10 m². Over and including priming coat of exterior primer applied @ 0.90 L/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (P.No. 46, It.No. 8.32 of CSR 2023-24 Volume 2) | Sqm | 160.68 | 160.68 | 258.19 | False | None | None | False | None | False | 41485.9692 | 0 |
|