| 1726222852000 | 0 | None | None | Buildings | Construction of Indian Rhinoceros Enclosure at Sri Chamarajendra Zoological Gardens Mysuru | 14337989.14 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 4001173 | 154829 | None | 001 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge.19.7.3 In cement mortar.(PWD, CSR, 2023-24, P.no.187, It.no.19.7.3) | Cum | 1080.45 | 1080.45 | 36.7 | False | None | None | False | None | False | 39652.515 | 0 | | 4001174 | 154829 | None | 002 | Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineerin- charge.19.9.2 In cement mortar (PWD, CSR, 2023-24, P.no.187, It.no.19.9.2) | Cum | 1768.2 | 1768.2 | 352.35 | False | None | None | False | None | False | 623025.27 | 0 | | 4001175 | 154829 | None | 003 | Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work. In all kinds of soils upto 300 mm depth (PWD, CSR, 2023-24, Page No.8, Item No. 1.12) | Cum | 99.75 | 99.75 | 900.0 | False | None | None | False | None | False | 89775.0 | 0 | | 4001176 | 154829 | None | 004 | Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work 1.14.1 In all kinds of soils Depth upto 3 m (PWD, CSR, 2023-24, Page No.8, Item No. 1.14.1) | Cum | 107.1 | 107.1 | 680.29 | False | None | None | False | None | False | 72859.059 | 0 | | 4001177 | 154829 | None | 005 | Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications.2.1.2 Mix 1:4:8 Using 40 mm nominal size graded crushed coarse aggregates.(PWD, CSR, 2023-24,Page No. 15, Item No. 2.1.2) | Cum | 5947.2 | 5947.2 | 127.22 | False | None | None | False | None | False | 756602.784 | 0 | | 4001178 | 154829 | None | 006 | Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)(PWD, CSR, 2021-22,Page No.9, Item No. 5.4) | Cum | 5238.45 | 5238.45 | 208.13 | False | None | None | False | None | False | 1090278.5985 | 0 | | 4001179 | 154829 | None | 007 | Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)(PWD, CSR, 2021-22,Page No.9, Item No. 5.4) | Cum | 6708.45 | 6708.45 | 208.13 | False | None | None | False | None | False | 1396229.6985 | 0 | | 4001180 | 154829 | None | 008 | Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications.
2.2.1 M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (PWD, CSR, 2023-24,Page No. 15, Item No. 2.2.1) | Cum | 7129.46 | 7129.46 | 67.53 | False | None | None | False | None | False | 481452.4338 | 0 | | 4001181 | 154829 | None | 009 | Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. 2.3.1 M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (PWD, CSR, 2023-24,Page No. 16, Item No. 2.3.1)
| Cum | 7303.07 | 7303.07 | 84.84 | False | None | None | False | None | False | 619592.4588 | 0 | | 4001182 | 154829 | None | 010 | Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. 2.3.1 M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (PWD, CSR, 2023-24,Page No. 16, Item No. 2.3.1 | Cum | 9958.73 | 9958.73 | 6.48 | False | None | None | False | None | False | 64532.5704 | 0 | | 4001183 | 154829 | None | 011 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. 2.5.1 M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (PWD, CSR, 2023-24,Page No. 16, Item No. 2.5.1) | Cum | 7657.65 | 7657.65 | 102.25 | False | None | None | False | None | False | 782994.7125 | 0 | | 4001184 | 154829 | None | 012 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. 2.5.1 M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates m qube 6630.00 (PWD, CSR, 2023-24,Page No. 16, Item No. 2.5.1) | Cum | 11834.55 | 11834.55 | 5.67 | False | None | None | False | None | False | 67101.8985 | 0 | | 4001185 | 154829 | None | 013 | Steel Fabrication
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. a. Buildings (PWD, CSR, 20232-24, Page No. 18, Item No.2.11 a) | Tonne | 93929.85 | 93929.85 | 21.34 | False | None | None | False | None | False | 2004462.999 | 0 | | 4001186 | 154829 | None | 014 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately)2.1.6 Mix 1:2:4 Using 20 mm nominal size graded crushed coarse aggregates (PWD, CSR, 2023-24,Page No. 15, Item No. 2.1.6) | Cum | 6555.15 | 6555.15 | 75.78 | False | None | None | False | None | False | 496749.267 | 0 | | 4001187 | 154829 | None | 015 | Providing Brick work with common burnt clay modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work.(PWD, CSR, 2021-22, Page No. 13, Item No. 6.4) | Cum | 9094.05 | 9094.05 | 32.53 | False | None | None | False | None | False | 295829.4465 | 0 | | 4001188 | 154829 | None | 016 | Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.(PWD, CSR, 2023-24,Page No. 83, Item No. 11.25.1) | Kg | 118.65 | 118.65 | 6000.0 | False | None | None | False | None | False | 711900.0 | 0 | | 4001189 | 154829 | None | 017 | Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.
Hot finished welded type tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.
(PWD, CSR, 2023-24,Page No. 82, Item No. 11.16.1) | Kg | 142.8 | 142.8 | 4000.0 | False | None | None | False | None | False | 571200.0 | 0 | | 4001190 | 154829 | None | 018 | Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineerin- charge. (Made of G.I. wire of dia 4 mm)(PWD, CSR, 2023-24,Page No. 95, Item No. 11.58) | Sqm | 843.15 | 843.15 | 161.4 | False | None | None | False | None | False | 136084.41 | 0 | | 4001191 | 154829 | None | 019 | Providing,fabricating and fixing Profiled Poly Urethane insulated Roof(PUF Sheet) having modular density 40kg/m2 and size 1.06m width and 7.60m length sheets roof having external sheet of 0.5mm steel, bottom sheet of 0.40mm steel with powder coated finish. The precoated sheet shall be of minimum 240MPa steel conforming to IS 14246 : 1995 and shal have zinc coating with minimum 120gsm as per IS 277:1992,.The roofing system shall have suitable water proof over lapping arrangments and GRIHA ceritifed.The fasting shall be of self tapping screws of required length with PVC head along with washer pre-painted aluminium cap unit with build in seal arrangments. The entire roof shall be firmly fastened to the existng frame including all lead and lifts, loading & unloading ,usage charges of machinery and equipments, transportation charges,labour charges and all other incidental charges etc.,complete as per standard technical detailed specifications and as directed by the Engineer in charge of the work.
7.67.1 30 mm thickness.(PWD, CSR, 2023-24,Page No. 38, Item No. 7.67.1)
| Sqm | 2307.9 | 2307.9 | 660.0 | False | None | None | False | None | False | 1523214.0 | 0 | | 4001192 | 154829 | None | 020 | Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.(PWD, CSR, 2023-24,Page No. 41, Item No. 8.2.2) | Sqm | 292.95 | 292.95 | 1457.91 | False | None | None | False | None | False | 427094.7345 | 0 | | 4001193 | 154829 | None | 021 | Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cost of materials, labour, curing as per specifications and as per directions of Engineer-in-charge.(PWD, CSR, 2023-24,Page No. 44, Item No. 8.19.1)
| Sqm | 267.75 | 267.75 | 844.0 | False | None | None | False | None | False | 225981.0 | 0 | | 4001194 | 154829 | None | 022 | Finishing with Epoxy paint (two coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete. On concrete work including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge(PWD, CSR, 2023-24,Page No. 48, Item No. 8.36.2) | Sqm | 180.6 | 180.6 | 2301.91 | False | None | None | False | None | False | 415724.946 | 0 | | 4001195 | 154829 | None | 023 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(PWD, CSR, 2023-24,Page No. 48, Item No. 8.40) | Sqm | 120.75 | 120.75 | 574.92 | False | None | None | False | None | False | 69421.59 | 0 | | 4001196 | 154829 | None | 024 | Constructing brick masonry chamber of internal dimension 450x300mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover.(PWD, CSR, 2023-24,Page No. 191, Item No. 16.11, Vol-5) | Each | 3726.45 | 3726.45 | 8.0 | False | None | None | False | None | False | 29811.6 | 0 | | 4001197 | 154829 | None | 025 | Constructing brick masonry chamber of internal dimension 450x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover.(PWD, CSR, 2023-24,Page No. 191, Item No. 16.10, Vol-5) | Each | 4447.8 | 4447.8 | 6.0 | False | None | None | False | None | False | 26686.8 | 0 | | 4001198 | 154829 | None | 026 | Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. complete For:10.1.7 PVC pipes 110mm dia., 6 kg/sqcm & class 3.(PWD, CSR, 2023-24,Page No. 113, Item No. 10.1.7, Vol-5) | Rmtr | 431.55 | 431.55 | 90.0 | False | None | None | False | None | False | 38839.5 | 0 | | 4001199 | 154829 | None | 027 | Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. complete For:10.1.9 PVC pipes 160mm dia., 6 kg/sqcm & class 3.(PWD, CSR, 2023-24,Page No. 113, Item No. 10.1.9, Vol-5) | Rmtr | 648.9 | 648.9 | 40.0 | False | None | None | False | None | False | 25956.0 | 0 | | 4001200 | 154829 | None | 028 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 13.31.3 25 mm nominal dia Pipes (PWD, CSR, 2023-24,Page No. 122, Item No. 13.31.3, Vol-5) | Rmtr | 333.9 | 333.9 | 120.0 | False | None | None | False | None | False | 40068.0 | 0 | | 4001201 | 154829 | None | 029 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.(PWD, CSR, 2023-24, Page No. 7, Item No. 1.9) | Cum | 279.3 | 279.3 | 680.29 | False | None | None | False | None | False | 190004.997 | 0 | | 4001202 | 154829 | None | 030 | Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.(PWD, CSR, 2023-24, Page No. 7, Item No. 1.11) | Cum | 454.65 | 454.65 | 279.45 | False | None | None | False | None | False | 127051.9425 | 0 | | 4001203 | 154829 | None | 031 | Providing and laying 60mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Cycle Tracks & Pedestrian Footpaths of approved
shape and colour, laid in required pattern and including over 30mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-incharge. (WMM/WBM Base to be paid separately if necessary as per relevant technical specification)(PWD, CSR, 2023-24,Page No. 51, Item No. 6.8.1) | Sqm | 1121.4 | 1121.4 | 220.0 | False | None | None | False | None | False | 246708.0 | 0 | | 4001204 | 154829 | None | 032 | Supplying and fixing M15 grade precast cement concrete Kerb stones for Roadway, Sidewalls and gutters fixed with CM 1:3 fixed and finsihed in line as per direction of Engineer in charge.
(The cost of PCC shall be paid extra) 8.42.5 300 x 300 x 100 mm size (PWD, CSR, 2023-24, Page No.74, Item No. 8.42.5) | m | 310.8 | 310.8 | 76.0 | False | None | None | False | None | False | 23620.8 | 0 | | 4001205 | 154829 | None | 033 | Providing and constructing WIRE CUT BRICK MACHINEHOLE CHAMBERS using Portland/Pozzolana cement, conical in shape at top, with CC 1:3:6 foundation using 40mm and down size graded metal of approved quality and with an offset of 0.15M alround the chamber.
Construct Brick masonry in CM 1:4, 340 mm thick, with wirecut bricks of approved quality, plaster inside and out side with CM 1:3, 12mm thick, except for the conical surface outside where the plaster thickness shall be 20mm. Slope inside to be 1:6 in the concrete towards central drain and finished smooth. Fixing of pipes in CC 1:2:4 with graded metal of 20mm and down size. Providing and fixing SFRC Machinehole frame and cover (Heavy Duty) conforming to IS:12592 with latest amendment, in CC 1:2:4. Providing and fixing footsteps made of 12mm dia. steel bars (Fe-500) with 3mm thick plastic encapsulation (IS-10910). The footsteps shall be fixed 30cms apart and on CC block embeded to masonry wall. The whole works include watering, curing, barricading, danger lighting, pouring tar over MH frame and cover, cost of tar, shoring, strutting, de-watering, engraving Machinehole number with flow direction on the inner conical surface etc. as per the drawing etc. as per technical specifications and for the following diameters and depth etc. for 1.2mm dia 16.15.6 Constructing Brick Masonry Circular Machinehole 1.2 m | Each | 40300.05 | 40300.05 | 2.0 | False | None | None | False | None | False | 80600.1 | 0 | | 4001206 | 154829 | None | 034 | Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and rolling and lowering into trenches, laying true to line and jointing of pipes and specials with electrofusion welding, giving hydraulic test as per relevant ISS with all lead and lifts including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excation, testing and commissioning. The rate is exclusive of required specials and fittings wherever necessary like saddle Tee, stub ends, flanged sets, bedns, reducers etc. complete (Contractor will make his own arrangements for procuring water for testing) etc. complete. NOTE: Upto 110mm dia Coil shall be used. For :HDPE PE 80 PN 6.0 9.1.7 HDPE Grade PE80-PN6.0,160mm dia.(PWD, CSR, 2023-24,Page No. 95, Item No. 9.1.7, Vol-5) | m | 1006.95 | 1006.95 | 60.0 | False | None | None | False | None | False | 60417.0 | 0 | | 4001207 | 154829 | None | 035 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.(PWD, CSR, 2023-24,Page No. 85, Item No. 11.28) | Kg | 593.25 | 593.25 | 820.0 | False | None | None | False | None | False | 486465.0 | 0 |
|