| 3989980 | 154483 | None | code01 | Earth work in surface excavation for stripping, seating of bund, Road way, by manual means for lowering & leveling the ground for all works other than foundation & depth in all kinds of soil not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage & other appurtenances required to complete the work.Volume-01 Pg- 07 Item-1.1 | Cum | 77.0 | 77.0 | 431.29 | False | None | None | False | None | False | 33209.33 | 0 |
| 3989981 | 154483 | None | code02 | Earth work excavation for FOUNDATION by Mechanical means depth upto 1.50m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including cost of explosives, dressing of excavated surfaces, disposing off or levelling the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, blasting materials, tools, usage of Machinery & all other appurtenaces required to complete the work Depth exceeding 1.5 m, but not exceeding 3 m Volume-01 Pg- 07 Item-1.16.2 | Cum | 509.3 | 509.3 | 362.7 | False | None | None | False | None | False | 184723.11 | 0 |
| 3989982 | 154483 | None | code03 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. Volume-01 Pg- 07 Item-1.9 | Cum | 224.4 | 224.4 | 379.86 | False | None | None | False | None | False | 85240.584 | 0 |
| 3989983 | 154483 | None | code04 | Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation,top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 l/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications. Volume-II Pg- 05 Item-4.1 | Sqm | 104.5 | 104.5 | 178.9 | False | None | None | False | None | False | 18695.05 | 0 |
| 3989984 | 154483 | None | code05 | Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) Volume-II Pg- 09 Item-5.4 | Cum | 5887.2 | 5887.2 | 77.6 | False | None | None | False | None | False | 456846.72 | 0 |
| 3989985 | 154483 | None | code06 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Volume-II Pg- 15 Mix 1:4:8 (M 7.5) Using 40 mm nominal size graded crushed coarse aggregates Volume-II Pg- 15 Item 2.1.2 | Cum | 5726.6 | 5726.6 | 11.61 | False | None | None | False | None | False | 66485.826 | 0 |
| 3989986 | 154483 | None | code07 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Volume-II Pg- 15 Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates 2.1.4 | Cum | 6300.8 | 6300.8 | 17.96 | False | None | None | False | None | False | 113162.368 | 0 |
| 3989987 | 154483 | None | code08 | Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarseaggregates and fine aggregates as per relevant IS Codes machinemixed with super plasticizers laid in finished layers, well compactedusing needle vibrators, including all lead & lifts, cost of all materials,quality confirming to the requirements of relevant IS codes , labour,Usage charges of machinery, curing and all the otherappurtenancesrequired to complete the work as per technical specifications. (The costof steel reinforcement to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse vol -1, P-15/2.2.2.1 aggregates. Including Form work for footing | Cum | 7466.58 | 7466.58 | 59.62 | False | None | None | False | None | False | 445157.4996 | 0 |
| 3989988 | 154483 | None | code09 | Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarseaggregates and fine aggregates as per relevant IS Codes machinemixed with super plasticizers laid in finished layers, well compactedusing needle vibrators, including all lead & lifts, cost of all materials,quality confirming to the requirements of relevant IS codes , labour,Usage charges of machinery, curing and all the otherappurtenancesrequired to complete the work as per technical specifications. (The costof steel reinforcement & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse vol -1, P-15/2.2.2.1 aggregates. Including Form work for Columns in Ground floor | Cum | 11180.73 | 11180.73 | 145.53 | False | None | None | False | None | False | 1627131.6369 | 0 |
| 3989989 | 154483 | None | code10 | Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarseaggregates and fine aggregates as per relevant IS Codes machinemixed with super plasticizers laid in finished layers, well compactedusing needle vibrators, including all lead & lifts, cost of all materials,quality confirming to the requirements of relevant IS codes , labour,Usage charges of machinery, curing and all the otherappurtenancesrequired to complete the work as per technical specifications. (The costof steel reinforcement & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse vol -1, P-15/2.2.2.1 aggregates. Including Form work for Columns Including Form work for Columns in First floor | Cum | 11292.52 | 11292.52 | 3.2 | False | None | None | False | None | False | 36136.064 | 0 |
| 3989990 | 154483 | None | code11 | Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarseaggregates and fine aggregates as per relevant IS Codes machinemixed with super plasticizers laid in finished layers, well compactedusing needle vibrators, including all lead & lifts, cost of all materials,quality confirming to the requirements of relevant IS codes , labour,Usage charges of machinery, curing and all the otherappurtenancesrequired to complete the work as per technical specifications. (The costof steel reinforcement & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse vol -1, P-15/2.2.2.1 aggregates. Including Form work for Columns Including Form work for Columns in Second floor | Cum | 11404.34 | 11404.34 | 1.07 | False | None | None | False | None | False | 12202.6438 | 0 |
| 3989991 | 154483 | None | code12 | Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarseaggregates and fine aggregates as per relevant IS Codes machinemixed with super plasticizers laid in finished layers, well compactedusing needle vibrators, including all lead & lifts, cost of all materials,quality confirming to the requirements of relevant IS codes , labour,Usage charges of machinery, curing and all the otherappurtenancesrequired to complete the work as per technical specifications. (The costof steel reinforcement to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarseaggregates. vol - 1,P-15/2.2.2.1 Including Form work for Plinth Beams, Roof Slabs, & Staircase | Cum | 9865.35 | 9865.35 | 100.8 | False | None | None | False | None | False | 994427.28 | 0 |
| 3989992 | 154483 | None | code13 | Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarseaggregates and fine aggregates as per relevant IS Codes machinemixed with super plasticizers laid in finished layers, well compactedusing needle vibrators, including all lead & lifts, cost of all materials,quality confirming to the requirements of relevant IS codes , labour,Usage charges of machinery, curing and all the otherappurtenancesrequired to complete the work as per technical specifications. (The costof steel reinforcement to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarseaggregates. vol - 1,P-15/2.2.2.1 Including Form work for Roof Slabs First floor | Cum | 9964.0 | 9964.0 | 33.45 | False | None | None | False | None | False | 333295.8 | 0 |
| 3989993 | 154483 | None | code14 | Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarseaggregates and fine aggregates as per relevant IS Codes machinemixed with super plasticizers laid in finished layers, well compactedusing needle vibrators, including all lead & lifts, cost of all materials,quality confirming to the requirements of relevant IS codes , labour,Usage charges of machinery, curing and all the otherappurtenancesrequired to complete the work as per technical specifications. (The costof steel reinforcement to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarseaggregates. vol - 1,P-15/2.2.2.1 Including Form work for Roof Slabs Second floor | Cum | 10062.66 | 10062.66 | 3.74 | False | None | None | False | None | False | 37634.3484 | 0 |
| 3989994 | 154483 | None | code15 | Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarseaggregates and fine aggregates as per relevant IS Codes machinemixed with super plasticizers laid in finished layers, well compactedusing needle vibrators, including all lead & lifts, cost of all materials,quality confirming to the requirements of relevant IS codes , labour,Usage charges of machinery, curing and all the otherappurtenancesrequired to complete the work as per technical specifications. (The costof steel reinforcement to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarseaggregates. vol - 1,P-15/2.2.2.1 Including Form work for Beams & Lintels | Cum | 10523.04 | 10523.04 | 15.12 | False | None | None | False | None | False | 159108.3648 | 0 |
| 3989995 | 154483 | None | code16 | Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarseaggregates and fine aggregates as per relevant IS Codes machinemixed with super plasticizers laid in finished layers, well compactedusing needle vibrators, including all lead & lifts, cost of all materials,quality confirming to the requirements of relevant IS codes , labour,Usage charges of machinery, curing and all the otherappurtenancesrequired to complete the work as per technical specifications. (The costof steel reinforcement to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarseaggregates. vol - 1,P-15/2.2.2.1 Including Form work for Beams First floor | Cum | 10628.27 | 10628.27 | 10.55 | False | None | None | False | None | False | 112128.2485 | 0 |
| 3989996 | 154483 | None | code17 | Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarseaggregates and fine aggregates as per relevant IS Codes machinemixed with super plasticizers laid in finished layers, well compactedusing needle vibrators, including all lead & lifts, cost of all materials,quality confirming to the requirements of relevant IS codes , labour,Usage charges of machinery, curing and all the otherappurtenancesrequired to complete the work as per technical specifications. (The costof steel reinforcement to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarseaggregates. vol - 1,P-15/2.2.2.1 Including Form work for Beams Second floor | Cum | 10733.5 | 10733.5 | 1.74 | False | None | None | False | None | False | 18676.29 | 0 |
| 3989997 | 154483 | None | code18 | Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarseaggregates and fine aggregates as per relevant IS Codes machinemixed with super plasticizers laid in finished layers, well compactedusing needle vibrators, including all lead & lifts, cost of all materials,quality confirming to the requirements of relevant IS codes , labour,Usage charges of machinery, curing and all the otherappurtenancesrequired to complete the work as per technical specifications. (The costof steel reinforcement to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarseaggregates. vol - 1,P-15/2.2.2.1 Including Form work for Chejja | Cum | 9536.51 | 9536.51 | 0.57 | False | None | None | False | None | False | 5435.8107 | 0 |
| 3989998 | 154483 | None | code19 | Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarseaggregates and fine aggregates as per relevant IS Codes machinemixed with super plasticizers laid in finished layers, well compactedusing needle vibrators, including all lead & lifts, cost of all materials,quality confirming to the requirements of relevant IS codes , labour,Usage charges of machinery, curing and all the otherappurtenancesrequired to complete the work as per technical specifications. (The costof steel reinforcement to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarseaggregates. vol - 1,P-15/2.2.2.1 Including Form work for substructure & Sump tank | Cum | 6158.37 | 6158.37 | 5.65 | False | None | None | False | None | False | 34794.7905 | 0 |
| 3989999 | 154483 | None | code20 | Providing Thermo-Mechanically Treated bars of grade Fe-500D ormore Steel reinforcement for R.C.C. work including straightening,cutting, bending, placing in position, binding and anchoring to adjacent members whereever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. (Thelaps and wastages shall not be measured separately) Volume- 2 ,Page 84/11.32. | Kgs | 101.2 | 101.2 | 16000.0 | False | None | None | False | None | False | 1619200.0 | 0 |
| 3990000 | 154483 | None | code21 | Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting,hoisting, fixing in position and applying a priming coat of approved steel primer all complete including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.Vol-02 P-75/11.2 | Kgs | 111.1 | 111.1 | 278.0 | False | None | None | False | None | False | 30885.8 | 0 |
| 3990001 | 154483 | None | code22 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. 11.28 | Kgs | 550.0 | 550.0 | 350.0 | False | None | None | False | None | False | 192500.0 | 0 |
| 3990002 | 154483 | None | code23 | Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Vol-02 P-81/11.16.1 | Kgs | 119.9 | 119.9 | 1500.0 | False | None | None | False | None | False | 179850.0 | 0 |
| 3990003 | 154483 | None | code24 | 11.34A Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding. Vol-02 P-85/11.34A | Kgs | 159.5 | 159.5 | 500.0 | False | None | None | False | None | False | 79750.0 | 0 |
| 3990004 | 154483 | None | code25 | Blocks of minimum strength of 35kg/sqcm and laid using 3/4INCH thick 1:5:5 (Cement : Soil : Quarry dust mixed with lime water) stabilized mud mortar. Concealed electrical works as specified in the drawings shall be carried out during the masonry wall process, Work includes lifting & placing of blocks, packing and raking out joints at all heights with proper curing, cost of labour, equipment and machinery/ fuel, scaffolding all leads and lifts and other incidental charges. Note: 1. Blocks to be rejected if noticed broken, chipped or damaged while stacking; 2. Block test report to be presented to architect and client before starting the walls at site. 3.Test to be done at contractor,s cost. (Required strength of blocks with 7% stabilisation ) 9INCH Thick SMB masonry | Cum | 6607.14 | 6607.14 | 175.78 | False | None | None | False | None | False | 1161403.0692 | 0 |
| 3990005 | 154483 | None | code26 | Blocks of minimum strength of 35kg/sqcm and laid using 3/4INCH thick 1:5:5 (Cement : Soil : Quarry dust mixed with lime water) stabilized mud mortar. Concealed electrical works as specified in the drawings shall be carried out during the masonry wall proc ess, Work includes lifting & placing of blocks, packing and raking out joints at all heights with proper curing, cost of labour, equipment and machinery/ fuel, scaffolding all leads and lifts and other incidental charges. Note: 1. Blocks to be rejected if noticed broken, chipped or damaged while stacking; 2. Block test report to be presented to architect and client before starting the walls at site. 3.Test to be done at contractor,s cost. (Required strength of blocks with 7% stabilisation ) 4INCH Thick SMB masonry | Sq.Ft | 1022.6 | 1022.6 | 131.74 | False | None | None | False | None | False | 134717.324 | 0 |
| 3990006 | 154483 | None | code27 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum ompressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per ecifications.Vol-02 P-17/6.33 | Sqm | 1167.1 | 1167.1 | 233.27 | False | None | None | False | None | False | 272249.417 | 0 |
| 3990007 | 154483 | None | code28 | Providing and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) GREATER THAN 78, solar reflection GREATER THAN 0.70 and initial emittance GREATER THAN 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm heightalong the arapet walls in the same manner as per direction of incharge. Vol-02 P-30/7.46 | Sqm | 1195.7 | 1195.7 | 249.16 | False | None | None | False | None | False | 297920.612 | 0 |
| 3990008 | 154483 | None | code29 | Supplying UNPLASTICISED PVC pipes conforming to IS 16098:2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite, rolling and lowering into trenches, laying rue to line and level and perfect linking at joints, testing and commissioning, including loading and unloading at both destinations and cuts of pipes wherever necessary including jointing of UPVC pipes (with cost of elastomeric sealing rings) and specials (excluding cost of specials) with jointing of approved type, with all labour, lead & lifts, including encasing the pipes alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (contractor will make his own arrangements for procuring water for testing) etc. for:Vol-05 P-134/2.2 Pipes of SN4, 110mm dia Vol-05 P-134/2.2 | Mtr | 298.1 | 298.1 | 97.56 | False | None | None | False | None | False | 29082.636 | 0 |
| 3990009 | 154483 | None | code30 | Providing and fixing on wall face unplasticised PVC moulded fittings accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.Vol-05 P-138/9.8 Bend 87.5 110 mm bend | No | 564.3 | 564.3 | 4.0 | False | None | None | False | None | False | 2257.2 | 0 |
| 3990010 | 154483 | None | code31 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.Vol-05 P-138/9.8 Shoe (Plain) 110 mm bend | Each | 250.0 | 250.0 | 4.0 | False | None | None | False | None | False | 1000.0 | 0 |
| 3990011 | 154483 | None | code32 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4(1 cement: 4 coarse sand) and making good the wall etc. complete. | Each | 85.0 | 85.0 | 48.78 | False | None | None | False | None | False | 4146.3 | 0 |
| 3990012 | 154483 | None | code33 | Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, curing complete as per specifications.Vol-02 P-23/7.18 | Cum | 2218.7 | 2218.7 | 9.28 | False | None | None | False | None | False | 20589.536 | 0 |
| 3990013 | 154483 | None | code34 | Preparing the surface, providing & applying plastering 6mm thick in CM 1:4 (1 cement: 4 fine M-sand) to Internal Ceiling, soffits of staircase / beams, column surface etc. including hacking, scraping, cleaning the surface, rounding of corners wherever required and specified, forming grooves wherever necessary, curing, cost of materials, labour, loading and unloading , transportation, necessary scaffolding, all other incidental charges with all leads and lifts, etc. complete as per drawings, specifications and as directed by the Engineer-in-charge. Vol-02 P-43/8.10 | Sqm | 190.3 | 190.3 | 474.55 | False | None | None | False | None | False | 90306.865 | 0 |
| 3990014 | 154483 | None | code35 | Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Vol-02 P-41/8.1.1 | Sqm | 234.3 | 234.3 | 237.97 | False | None | None | False | None | False | 55756.371 | 0 |
| 3990015 | 154483 | None | code36 | Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Vol-02 P-41/8.1.1 First Floor | Sqm | 236.64 | 236.64 | 325.31 | False | None | None | False | None | False | 76981.3584 | 0 |
| 3990016 | 154483 | None | code37 | Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing omplete as per specifications and as per directions of Engineer-in-charge. Vol-02 P-42/8.8 | Sqm | 337.7 | 337.7 | 114.4 | False | None | None | False | None | False | 38632.88 | 0 |
| 3990017 | 154483 | None | code38 | Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing omplete as per specifications and as per directions of Engineer-in-charge. Vol-02 P-42/8.8 First Floor | Sqm | 341.08 | 341.08 | 106.3 | False | None | None | False | None | False | 36256.804 | 0 |
| 3990018 | 154483 | None | code39 | Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing omplete as per specifications and as per directions of Engineer-in-charge. Vol-02 P-42/8.8 Second Floor | Sqm | 344.45 | 344.45 | 223.14 | False | None | None | False | None | False | 76860.573 | 0 |
| 3990019 | 154483 | None | code40 | KSRB 4-5 : Providing lath plaster with cement mortar 1:3, 5cms thick with 6mm dia mild steel bars at 20 cms c/c both horizontally and vertically fixed with chicken mesh for drop chajja, facia, backing to cup boards including cost of all materials, labour, providing and removing form work HOM curing, complete as per specifications. Specification No. KBS SR 2018-19 /4.27 | Sqm | 1179.2 | 1179.2 | 150.0 | False | None | None | False | None | False | 176880.0 | 0 |
| 3990020 | 154483 | None | code41 | Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold pplied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ .6kg per m2 to achieve final DFT (dry film thickness) of 1mm including prime coat of epoxy primer @150 g per m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification & with a 10 years warranty on product & work from certified nufacturers as per the direction of the Engineer In charge.Vol-02 P-133/15.1 | Sqm | 819.5 | 819.5 | 295.23 | False | None | None | False | None | False | 241940.985 | 0 |
| 3990021 | 154483 | None | code42 | Providing and fixing 18G MS man hole covers including one coat of primer & 2 coats of enamel paint, all complete. | Each | 3500.0 | 3500.0 | 2.0 | False | None | None | False | None | False | 7000.0 | 0 |
| 3990022 | 154483 | None | code43 | Supplying and fixing in position PVC Rungs as per specification from M/s. Arpitha Exports or Equivalent the design approved by Architect / Engineers Sizes, 25mm Thick x 170 mm wide x 260 mm length reinforced inside with 10 mm Steel rod, bent in U shape including fixing in position, damage to shuttering (if required), used in the UG Sump tank, Over Head Tank, Swimming Pools & Man Holes with necessary civil work etc., all complete. | Each | 350.0 | 350.0 | 5.0 | False | None | None | False | None | False | 1750.0 | 0 |
| 3990023 | 154483 | None | code44 | Wall bores in Brick masonry upto 45 cm thick. including cost of materials,labour, HOM complete as per specifications. SR 2018-19 | Each | 138.6 | 138.6 | 9.0 | False | None | None | False | None | False | 1247.4 | 0 |
| 3990024 | 154483 | None | code45 | Providing and fixing 75mm thick Granite stone slab for Storm Water Drain cover with edges to be neatly dressed joints filled with 1:3 CM, etc., all complete. | Sq.Ft | 350.0 | 350.0 | 100.0 | False | None | None | False | None | False | 35000.0 | 0 |
| 3990025 | 154483 | None | code46 | Wall bores in size stone masonry. including cost of materials, labour, HOMcomplete as per specifications. 50mm dia upto 110 mm dia. Pipes. | Each | 416.9 | 416.9 | 20.0 | False | None | None | False | None | False | 8338.0 | 0 |
| 3990026 | 154483 | None | code47 | Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (i nner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover..Vol-05 P-187/9 | Each | 5474.7 | 5474.7 | 3.0 | False | None | None | False | None | False | 16424.1 | 0 |
| 3990027 | 154483 | None | code48 | KSRB 7.10 : Providing and fixing in position anodized aluminium windows and ventilators as per approved drawings with sliding shutters using three track window frame section of size 61.85x31.75mm. with 1.2mm thick, bottom section weight 0.695 kg/m, sides and top sections 1.3 mm. thick weight 0.659 kg/m; and shutter comprising top and bottom section of size 40mmx18mm, 1.25mm thick 0.417 kg./m; shutter outer side 40mmx18mm, 1.25mm.thick weight 0.417 kg/m, shutter interlock section 40mmx26.7mm, 1.1mm thick, weight 0.469 kg/m. the shutters mounted on nylon rollers with approved quality of fixtures such as aluminium handles tower bolts etc.; and providing and fixing 5.5mm. thick plain glass for shutters fitted with rubber beading aluminium sections anodised 12 to 15 microns, including cutting to required length, joints mitred subdividing the frame tenonned and rivetted in the assembled frame stiffened with end clips at corners angles etc., and fixed to the walls, lintels, floor beams/cills as the case may be with necessary steel screws, raul plugs, or teak wood gatties including cutting with making good the original surface using cement mortar, aluminium sections pretreated for removal of any and including cost of materials, fixtures, labour and HOM of machinery complete as per specifications. P -38/7.11.2 | Sqm | 3374.8 | 3374.8 | 83.34 | False | None | None | False | None | False | 281255.832 | 0 |
| 3990028 | 154483 | None | code49 | Providing Mathi / Nandi wood wrought and putup for purlins, common rafters and similar work including cost of materials, labour, usage charges complete as per specifications. Vol-02 P-99/12.3 | Cum | 81356.0 | 81356.0 | 1.2 | False | None | None | False | None | False | 97627.2 | 0 |
| 3990029 | 154483 | None | code50 | Providing Teak wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps ), but including cost of materials, labour, usage charges complete as per specifications. Vol-02 P-99/12.10 | Cum | 259213.9 | 259213.9 | 0.24 | False | None | None | False | None | False | 62211.336 | 0 |
| 3990030 | 154483 | None | code51 | Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround oor shutters covered with cross bonded wooden sheets (core veneer) hot ressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS ecifications 2202 (part-I) 1991. from manufacturer complete as per spcification. 30 mm thick Both side teak Vol-02 P-106/12.57.1 | Sqm | 4178.9 | 4178.9 | 45.08 | False | None | None | False | None | False | 188384.812 | 0 |
| 3990031 | 154483 | None | code52 | Providing and fixing in position fully panelled Teak wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. (excluding cost of fixtures) Vol-02 P-100/12.14 | Sqm | 10267.4 | 10267.4 | 5.94 | False | None | None | False | None | False | 60988.356 | 0 |
| 3990032 | 154483 | None | code53 | Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. Vol-02 P-107/12.60 | No | 915.2 | 915.2 | 25.0 | False | None | None | False | None | False | 22880.0 | 0 |
| 3990033 | 154483 | None | code54 | Providing and fixing chromium plated brass night latch of approved
quality including necessary screws etc. complete. Vol-02 P-107/12.61 | No | 683.1 | 683.1 | 25.0 | False | None | None | False | None | False | 17077.5 | 0 |
| 3990034 | 154483 | None | code55 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete Vol-02 P-107/12.63 | No | 122.1 | 122.1 | 75.0 | False | None | None | False | None | False | 9157.5 | 0 |
| 3990035 | 154483 | None | code56 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. Vol-02 P-107/12.59 | No | 968.0 | 968.0 | 25.0 | False | None | None | False | None | False | 24200.0 | 0 |
| 3990036 | 154483 | None | code57 | Providing and fixing sky light fabricated using appropriate extruded sections (Jindal / Indal or other approved make), from designated sections for outer frame and intermediate sections with necessary ardware etc.,., complete all as per architects instructions & drawings. Rate to include cost of providing and fixing 6mm thick Antelio plus Dew drop ST150 Glass + 1.52 thick clear PVD lamination + 6mm thick clear toughened glass with all necessary hardware, fittings etc complete all as per architects instructions & drawings. | Sqm | 12500.0 | 12500.0 | 5.94 | False | None | None | False | None | False | 74250.0 | 0 |
| 3990037 | 154483 | None | code58 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & hade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. omplete. Size of Tile 600x600 mm Vol-2 Pg/61/9.17.2 | Sqm | 1212.2 | 1212.2 | 123.54 | False | None | None | False | None | False | 149755.188 | 0 |
| 3990038 | 154483 | None | code59 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & hade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. omplete. Size of Tile 600x600 mm Vol-2 Pg/61/9.17.2 First Floor | Sqm | 1224.32 | 1224.32 | 257.73 | False | None | None | False | None | False | 315543.9936 | 0 |
| 3990039 | 154483 | None | code60 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & hade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. omplete. Size of Tile 600x600 mm Vol-2 Pg/61/9.17.2 Second Floor | Sqm | 1236.44 | 1236.44 | 61.54 | False | None | None | False | None | False | 76090.5176 | 0 |
| 3990040 | 154483 | None | code61 | Providing and fixing glazed screen printed border tile 75mm wide having thickness 5mm, of approved quality & make, in all shades, design and prints, in dado, over 12mm thick bed of cement mortar 1:3 (1 Cement : 3 Coarse sand) and jointing with grey cement slurry @ 3.3 kg/m2 including pointing with white cement mixed with pigment of matching shade, all complete as approved by Engineer - in - Charge
Vol-2 Pg/61/9.18 | Sqm | 143.0 | 143.0 | 1.73 | False | None | None | False | None | False | 247.39 | 0 |
| 3990041 | 154483 | None | code62 | Providing and fixing glazed screen printed border tile 75mm wide having thickness 5mm, of approved quality & make, in all shades, design and prints, in dado, over 12mm thick bed of cement mortar 1:3 (1 Cement : 3 Coarse sand) and jointing with grey cement slurry @ 3.3 kg/m2 including pointing with white cement mixed with pigment of matching shade, all complete as approved by Engineer - in - Charge Vol-2 Pg/61/9.18 First Floor | Sqm | 144.43 | 144.43 | 53.45 | False | None | None | False | None | False | 7719.7835 | 0 |
| 3990042 | 154483 | None | code63 | Providing and fixing glazed screen printed border tile 75mm wide having thickness 5mm, of approved quality & make, in all shades, design and prints, in dado, over 12mm thick bed of cement mortar 1:3 (1 Cement : 3 Coarse sand) and jointing with grey cement slurry @ 3.3 kg/m2 including pointing with white cement mixed with pigment of matching shade, all complete as approved by Engineer - in - Charge Vol-2 Pg/61/9.18 Second Floor | Sqm | 145.85 | 145.85 | 53.45 | False | None | None | False | None | False | 7795.6825 | 0 |
| 3990043 | 154483 | None | code64 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser, treads of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints as per direction of Engineer in charge.Vol-2 Pg/61/9.19 | Mtr | 1356.3 | 1356.3 | 333.33 | False | None | None | False | None | False | 452095.479 | 0 |
| 3990044 | 154483 | None | code65 | Providing, laying & fixing cement base, precast, pre polished cement concrete, designer tiles 25mm thick conforming to IS 1237 heavy duty tiles for flooring, treads of steps and landing, laid on a bed of 12mm thick cement mortar 1:3 mis finished with flush pointing using white cement, including cost of materials, mortar, including cutting, griding the edge to half/full round wherever required, labour, curing complete as per specification.Vol-2 Pg/65/9.40 | Sqm | 1246.3 | 1246.3 | 33.92 | False | None | None | False | None | False | 42274.496 | 0 |
| 3990045 | 154483 | None | code66 | Providing and laying heavy duty cobble stones 60mm thick interlock pavers, using cement and course sand for manufacture of blocks of approved size, shape and colour with a minimum compressive strength of 30 MPa as per IRC SP 63:2018 & IS 15658 over 50mm thick sand bed ( average thickness ) and compacting with plate vibrator having 3 tons compaction force thereby forcing part of sand underneath to come up in between joints, final compaction of paver surface joints into its final level, including cost of materials, labour and Usage charges of machinery complete as per specifications..Vol-2 Pg/64/9.31 | Sqm | 1195.7 | 1195.7 | 229.46 | False | None | None | False | None | False | 274365.322 | 0 |
| 3990046 | 154483 | None | code67 | Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints finished with cement mortar 1:3 over existing cement oncrete bed , including cost of materials, mortar, labour, curing complete as per specifications.taxes/duties) of granite - Rs.180/- per Sq.ft) Vol-2 Pg/64/9.30 | Sqm | 2641.1 | 2641.1 | 18.02 | False | None | None | False | None | False | 47592.622 | 0 |
| 3990047 | 154483 | None | code68 | Providing and laying flooring and steps machine cut granite slabs 40 mm thick on cement mortar bed 1:6, 25 mm thick, and pointed with cement mortar 1:3 over existing cement concrete bed , including cost of materials, mortar labour, curing complete as per specifications. Vol-2 Pg/63/9.28 | Sqm | 2600.4 | 2600.4 | 40.61 | False | None | None | False | None | False | 105602.244 | 0 |
| 3990048 | 154483 | None | code69 | Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints finished with cement mortar 1:3 over existing cement oncrete bed , including cost of materials, mortar, labour, curing complete as per specifications.Vol-2 Pg/63/9.30 | Sqm | 2634.5 | 2634.5 | 117.26 | False | None | None | False | None | False | 308921.47 | 0 |
| 3990049 | 154483 | None | code70 | Providing and fixing 20mm thick granite stone slabs for coping on Toilet Ledge / balcony parapet / planter bed walls etc., over 12mm thick bed of cement mortar 1:3 (1 cement :3 coarse sand) and cement slurry @ 4.4 kg/sqm including pointing in white cement, rubbing, curing moulding and polishing to edge to give high gloss finish etc. Complete. Granite Ledge | Sqm | 2641.1 | 2641.1 | 1.2 | False | None | None | False | None | False | 3169.32 | 0 |
| 3990050 | 154483 | None | code71 | Providing and fixing 20mm thick gang saw water cut Lakared granite for cladding in CM 1:3 (1 cement : 3 coarse sand) proportion with a coat of rough plastering using CM 1:4 (1 cement : 4 fine sand), cut to required shape, pattern with paper joints, finished with cement mortar using white cement and colour pigments to match the colour of slab making through jointing with sealant, grooves in joints including cost of curing etc., complete including cost and conveyance of all materials, mortar, labour for all items of work, usage charges of machinery etc., complete as per specification. Vol-2 Pg/72/10.19 | Sqm | 3847.8 | 3847.8 | 150.0 | False | None | None | False | None | False | 577170.0 | 0 |
| 3990051 | 154483 | None | code72 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge.Vol-02 P-50/8.51 | Sqm | 91.3 | 91.3 | 112.0 | False | None | None | False | None | False | 10225.6 | 0 |
| 3990052 | 154483 | None | code73 | Providing and finishing external walls in two coats with APEX ULTIMA paint of approved shade to give and even shade after thoroughly brooming the surface to remove all dirt and loose powdered material, free from mortor drops and other foreign matter cost of materials, labour, complete as per specification. | Sqm | 190.0 | 190.0 | 1205.2 | False | None | None | False | None | False | 228988.0 | 0 |
| 3990053 | 154483 | None | code74 | Painting with silicon & acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces :Two coats with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust,mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.Vol-02 P-47/8.35.2 | Sqm | 105.6 | 105.6 | 621.0 | False | None | None | False | None | False | 65577.6 | 0 |
| 3990054 | 154483 | None | code75 | Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 ltr/10 Sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Vol-02 P-45/8.29 | Sqm | 228.8 | 228.8 | 950.0 | False | None | None | False | None | False | 217360.0 | 0 |
| 3990055 | 154483 | None | code76 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 25 mm nominal dia pipes 13.32.3 | Mtr | 523.6 | 523.6 | 200.0 | False | None | None | False | None | False | 104720.0 | 0 |
| 3990056 | 154483 | None | code77 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, ic fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 32 mm nominal dia pipes 13.32.4 | Mtr | 611.6 | 611.6 | 150.0 | False | None | None | False | None | False | 91740.0 | 0 |
| 3990057 | 154483 | None | code78 | Jaguar Bib cock with flange (KUP-35037M) | No | 1600.0 | 1600.0 | 15.0 | False | None | None | False | None | False | 24000.0 | 0 |
| 3990058 | 154483 | None | code79 | Jaguar stop cock and flush cock with fitting sleeve, operating lever & adjustable wall flange (ALD083, ALD-089 & ALD-081) | No | 800.0 | 800.0 | 15.0 | False | None | None | False | None | False | 12000.0 | 0 |
| 3990059 | 154483 | None | code80 | Supply of Gunmetal Ball Valve of Non rising stem, screwed in bonnet,
inside screw, integral seats, screwed female ends to IS:554/ BS 21/ ISO
7, Unbreakable sheet metal Handwheel, confoming to IS:778 Class-1
including provision of re-packing under pressure with appurtenances,
complete : 150 mm nominal bore Vol 05 Pg 80 Item 61 | No | 232.1 | 232.1 | 5.0 | False | None | None | False | None | False | 1160.5 | 0 |
| 3990060 | 154483 | None | code81 | Supplying UNPLASTICISED PVC pipes conforming to IS 16098:2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading and unloading at both destinations and cuts of pipes wherever necessary including jointing of UPVC pipes (with cost of elastomeric sealing rings) and specials (excluding cost of specials) with jointing of approved type, with all labour, lead & lifts, including encasing the pipes alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (contractor will make his own arrangements for procuring water for testing) etc. for: Pipes of SN4, 110mm dia. | Mtr | 298.1 | 298.1 | 100.0 | False | None | None | False | None | False | 29810.0 | 0 |
| 3990061 | 154483 | None | code82 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 100 mm diameter | No | 222.2 | 222.2 | 6.0 | False | None | None | False | None | False | 1333.2 | 0 |
| 3990062 | 154483 | None | code83 | The Non Return Valve (NRV) assembly complete with rubber ‘O’ ring.Vol 05 Pg 157 Item 2.13 | No | 638.0 | 638.0 | 10.0 | False | None | None | False | None | False | 6380.0 | 0 |
| 3990063 | 154483 | None | code84 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. | Ltr | 8.8 | 8.8 | 6000.0 | False | None | None | False | None | False | 52800.0 | 0 |
| 3990064 | 154483 | None | code85 | Providing GM (copper alloy) wheel valves/ check valve confirming to IS 778/1990 Class-I with latest amendments No. 1 and with ISI mark screwed in bonnet integral seat inside, screw, rising spindle screwed female ends confirming to IS 554/ 1990 body hudraulically tested 1.50 HP seat hydraulically tested 1.00 HP. For 25 mm dia GM (Copper alloy) wheel valves/ check valve | Nos | 996.6 | 996.6 | 5.0 | False | None | None | False | None | False | 4983.0 | 0 |
| 3990065 | 154483 | None | code86 | Providing GM (copper alloy) wheel valves/ check valve confirming to IS 778/1990 Class-I with latest amendments No. 1 and with ISI mark screwed in bonnet integral seat inside, screw, rising spindle screwed female ends confirming to IS 554/ 1990 body hudraulically tested 1.50 HP seat hydraulically tested 1.00 HP. For 32 mm dia GM (Copper alloy) wheel valves/ check valve | No | 1141.8 | 1141.8 | 5.0 | False | None | None | False | None | False | 5709.0 | 0 |
| 3990066 | 154483 | None | code87 | Providing and fixing wash basin with C.I. brackets, 15 mm PTMT pillar
cock, 32 mm PTMT waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm PTMT pillar cock. Vol 02 Pg 157 Item 14.7B | No | 1897.5 | 1897.5 | 10.0 | False | None | None | False | None | False | 18975.0 | 0 |
| 3990067 | 154483 | None | code88 | Providing NP/CP waste unions conforming to ISI specifications and fixing them in position as per directions including cost of materials, fixtures and conveyance to work spot etc., complete. 32 mm dia nominal bore | No | 129.6 | 129.6 | 5.0 | False | None | None | False | None | False | 648.0 | 0 |
| 3990068 | 154483 | None | code89 | Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover..Vol 05 Pg 187 Item 9 | No | 5474.7 | 5474.7 | 6.0 | False | None | None | False | None | False | 32848.2 | 0 |
| 3990069 | 154483 | None | code90 | KSRB 11-1 : Providing and fixing white vitreous china clay, water closet Indian type (Squatting pan) of size 580mm with footrests, 100mm S or P trap, 10 litre low level, P.V.C flushing cistern ( all are approved make ) with fittings, C.I / M.S brackets, 32mm diameter flush pipe fittings and clamps, overflow arrangements with specials and 25mm mosquito proof coupling of approved design, painting of fittings and brackets, cutting and making good the wall and floor wherever required, including cost of materials, labour complete as per specifications. Specification No. KBS 11 Vol 02 pg 123. Item 14.1 | No | 4670.6 | 4670.6 | 2.0 | False | None | None | False | None | False | 9341.2 | 0 |
| 3990070 | 154483 | None | code91 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : Vol 02 pg 123. Item 14.3 | No | 5505.5 | 5505.5 | 4.0 | False | None | None | False | None | False | 22022.0 | 0 |
| 3990071 | 154483 | None | code92 | White Vitreous China Wash basin size 550x400 mm with a pair of 15
mm C.P. brass pillar taps Vol 02 pg 125. Item 14.7.3 | No | 2781.9 | 2781.9 | 5.0 | False | None | None | False | None | False | 13909.5 | 0 |
| 3990072 | 154483 | None | code93 | KSRB 11-18-6 : Providing and fixing sand cast iron soil waste double unequal junction of required degree with access door insertion of rubber washers 3mm thick bolts and nuts, including cost of materials, labour, testing complete as per specifications. KBS 11-1.10 with access door 100 x 100 x 75 x 75 mm | No | 1164.24 | 1164.24 | 3.0 | False | None | None | False | None | False | 3492.72 | 0 |
| 3990073 | 154483 | None | code94 | Providing and fixing 100 mm sand cast Iron grating for gully trap. Vol 02 pg 128. Item 14.29 | No | 221.4 | 221.4 | 8.0 | False | None | None | False | None | False | 1771.2 | 0 |
| 3990074 | 154483 | None | code95 | Providing and fixing CI Nahani trap of approved make conforming to ISI specifications and construction of Cistern in M-15 as per directions (Rate is inclusive of cost of materials and fixtures and conveyance of materials to work spot).-do- 10cms x 7.5cms | No | 270.0 | 270.0 | 8.0 | False | None | None | False | None | False | 2160.0 | 0 |
| 3990075 | 154483 | None | code96 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. 14.31 | No | 1068.1 | 1068.1 | 4.0 | False | None | None | False | None | False | 4272.4 | 0 |
| 3990076 | 154483 | None | code97 | Electrical Works:- Supplying heavy gauge PVC conduit pipe confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary19/20mm dia 2mm thick P/1 of 47/1.2.1 | Mtr | 61.0 | 61.0 | 500.0 | False | None | None | False | None | False | 30500.0 | 0 |
| 3990077 | 154483 | None | code98 | Do- 25 mm dia 2 mm thick | Mtr | 70.0 | 70.0 | 500.0 | False | None | None | False | None | False | 35000.0 | 0 |
| 3990078 | 154483 | None | code99 | Supplying heavy gauge PVC Conduit Pipe with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering up to the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary. P/1-471.3.1 19/20mm dia 2mm thick | Mtr | 75.0 | 75.0 | 100.0 | False | None | None | False | None | False | 7500.0 | 0 |
| 3990079 | 154483 | None | code100 | Do- 25mm dia 2mm thick | Mtr | 80.0 | 80.0 | 200.0 | False | None | None | False | None | False | 16000.0 | 0 |
| 3990080 | 154483 | None | code101 | Supplying And Fixing Metal Fan Box with Round Hook. P 2 of 47/1.12 | No | 163.0 | 163.0 | 10.0 | False | None | None | False | None | False | 1630.0 | 0 |
| 3990081 | 154483 | None | code102 | Supplying and fixing PVC/metal conduit Deep junction box P 1 of 47 /1.5.1 19/20 mm deep Junction box | No | 49.0 | 49.0 | 10.0 | False | None | None | False | None | False | 490.0 | 0 |
| 3990082 | 154483 | None | code103 | Do- 25 mm deep Junction box | No | 51.0 | 51.0 | 50.0 | False | None | None | False | None | False | 2550.0 | 0 |
| 3990083 | 154483 | None | code104 | Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Short point upto 3m from tapping point to out let via switch box P3-47/2.2.1 | Point | 251.0 | 251.0 | 80.0 | False | None | None | False | None | False | 20080.0 | 0 |
| 3990084 | 154483 | None | code105 | Do- Medium point above 3Mtr upto 6Mtr from tapping point to out let via switch box | Point | 361.0 | 361.0 | 40.0 | False | None | None | False | None | False | 14440.0 | 0 |
| 3990085 | 154483 | None | code106 | Do- Long point above 6Mtr upto 10Mtr from tapping point to out let via switch box | Point | 542.0 | 542.0 | 50.0 | False | None | None | False | None | False | 27100.0 | 0 |
| 3990086 | 154483 | None | code107 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 1.5 sqmm | Mtr | 26.0 | 26.0 | 1500.0 | False | None | None | False | None | False | 39000.0 | 0 |
| 3990087 | 154483 | None | code108 | Do- 2.5 sqmm | Mtr | 40.0 | 40.0 | 2000.0 | False | None | None | False | None | False | 80000.0 | 0 |
| 3990088 | 154483 | None | code109 | Do- . 4 sqmm | Mtr | 59.0 | 59.0 | 500.0 | False | None | None | False | None | False | 29500.0 | 0 |
| 3990089 | 154483 | None | code110 | Do- 6 sqmm | Mtr | 87.0 | 87.0 | 300.0 | False | None | None | False | None | False | 26100.0 | 0 |
| 3990090 | 154483 | None | code111 | Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/NF screws etc., complete..1-3Way P5-47/3.3 | Each | 91.0 | 91.0 | 20.0 | False | None | None | False | None | False | 1820.0 | 0 |
| 3990091 | 154483 | None | code112 | Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/NF screws etc., complete. 8Way | Each | 195.0 | 195.0 | 10.0 | False | None | None | False | None | False | 1950.0 | 0 |
| 3990092 | 154483 | None | code113 | Do- 10-12Way | Each | 277.0 | 277.0 | 10.0 | False | None | None | False | None | False | 2770.0 | 0 |
| 3990093 | 154483 | None | code114 | Do- 16-18Way | Each | 225.0 | 225.0 | 8.0 | False | None | None | False | None | False | 1800.0 | 0 |
| 3990094 | 154483 | None | code115 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.1 to 3 Module P5-47/3.5 | Each | 152.0 | 152.0 | 20.0 | False | None | None | False | None | False | 3040.0 | 0 |
| 3990095 | 154483 | None | code116 | Do- 8 Module | Each | 302.0 | 302.0 | 10.0 | False | None | None | False | None | False | 3020.0 | 0 |
| 3990096 | 154483 | None | code117 | Do- 10-12 Module | Each | 363.0 | 363.0 | 10.0 | False | None | None | False | None | False | 3630.0 | 0 |
| 3990097 | 154483 | None | code118 | Do- 16-18Way | Each | 403.0 | 403.0 | 8.0 | False | None | None | False | None | False | 3224.0 | 0 |
| 3990098 | 154483 | None | code119 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6Amps one way Switch P/5-47/3.6.1 | Each | 88.0 | 88.0 | 120.0 | False | None | None | False | None | False | 10560.0 | 0 |
| 3990099 | 154483 | None | code120 | Do- 6Amps Two way Switch | Each | 152.0 | 152.0 | 20.0 | False | None | None | False | None | False | 3040.0 | 0 |
| 3990100 | 154483 | None | code121 | Do- 6Amps 3way socket | Each | 162.0 | 162.0 | 50.0 | False | None | None | False | None | False | 8100.0 | 0 |
| 3990101 | 154483 | None | code122 | Do- Stepped Fan Regulator. | Each | 313.0 | 313.0 | 25.0 | False | None | None | False | None | False | 7825.0 | 0 |
| 3990102 | 154483 | None | code123 | Do- 32Amps DP switch | Each | 375.0 | 375.0 | 30.0 | False | None | None | False | None | False | 11250.0 | 0 |
| 3990103 | 154483 | None | code124 | Do- 6Amps Bell push | Each | 159.0 | 159.0 | 2.0 | False | None | None | False | None | False | 318.0 | 0 |
| 3990104 | 154483 | None | code125 | Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and ,C, Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.6-32Amps SP - P/13-47/5.17 | Each | 523.0 | 523.0 | 15.0 | False | None | None | False | None | False | 7845.0 | 0 |
| 3990105 | 154483 | None | code126 | Do- 6-32Amps DP | Each | 1103.0 | 1103.0 | 8.0 | False | None | None | False | None | False | 8824.0 | 0 |
| 3990106 | 154483 | None | code127 | Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB,s single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS enclosure.II -Double Door6Way TP &N | Each | 3735.0 | 3735.0 | 2.0 | False | None | None | False | None | False | 7470.0 | 0 |
| 3990107 | 154483 | None | code128 | Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment,s on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit . The pit should be filled with equal proportion of salt and charcoal 150mm all-round the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI wire of size as per lSI specification 7.3.3. of IS 732 using 12mm dia bolts, nuts, washers and check nuts etc., the pipe shall have 16 through holes of 12 mm dia | No | 2999.7 | 2999.7 | 2.0 | False | None | None | False | None | False | 5999.4 | 0 |
| 3990108 | 154483 | None | code129 | Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete.12INCH Sweep (300mm) P/22-47/6.2.1 | Each | 2997.0 | 2997.0 | 10.0 | False | None | None | False | None | False | 29970.0 | 0 |
| 3990109 | 154483 | None | code130 | Fixing one exhaust fan after making a suitable notch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 amps, ceiling rose with sufficient length of 23 / 0.0076 inch PVC insulated twin core wire of approved make with wire mesh and wooden frame.P/46-47/13.13 | Each | 702.0 | 702.0 | 10.0 | False | None | None | False | None | False | 7020.0 | 0 |
| 3990110 | 154483 | None | code131 | Supplying of Ceiling Fan with Capacitor rating As per guideline of BEE 5 star rating and IS:374/79 and also comply with IS: 1709/1984 with latest amendment, Rated voltage 220 V/50 Hz, Rated power input 48 W plus or mius 10 , Rated current As per IS:374/79, Rated power factor 0.9 lagging(min), Rated speed 350 +/- 10 RPM, Rated air delivery 210 +/- 10% Cubic Meter Minimum, Rated service value 4.2 CMM / Watt, Three Blades of blade leaf 1.05 mm thick Aluminium Alloy sheet, Class B motor insulation, Bearing Two ball bearings, Top 6202, Bottom 6201, as per IS specification, Motor winding. Temp rise Shall not exceed 75 deg C over and ambient of 40 C by resistance method at 245 Volts, Insulation resistance Shall not be less than Two Mega Ohms (2M Ohms), Leakage current Should not exceed 210 Micro Amp, Power input, watt& current, Air Delivery & Fan Speed as per IS:374/1979 with latest amendment, 2 year manufacturer Warranty.48INCH Sweep 5 Star (1200mm) P/22-47/6.3.1 | Each | 2085.0 | 2085.0 | 20.0 | False | None | None | False | None | False | 41700.0 | 0 |
| 3990111 | 154483 | None | code132 | Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing ,S,, hook with fan regulator to the existing board together with supplying and fixing 5 amps. ceiling rose, necessary length of 23 / 0.0076 inch PVC insulated twin twisted copper wire and wiring.P46-47/13.10 | Each | 162.0 | 162.0 | 20.0 | False | None | None | False | None | False | 3240.0 | 0 |
| 3990112 | 154483 | None | code133 | Supplying, erecting, testing & commissioning of ON-LINE UPS system suitable for operation on 230V, 50Hz, A/C supply, with isolation transformer all accessories complete and Excluding batteries and wiring complete.3 kVA ON LINE UPS P/29-47/9.3.3 | Each | 47973.0 | 47973.0 | 1.0 | False | None | None | False | None | False | 47973.0 | 0 |
| 3990113 | 154483 | None | code134 | Supplying, installation, testing & commissioning of 12V DC, AH batteries in poly propylene container for U.P.S. Sealed maintenance free batteries.75/80 AH capacity P/29-47/9.5.6 | Each | 10748.0 | 10748.0 | 2.0 | False | None | None | False | None | False | 21496.0 | 0 |
| 3990114 | 154483 | None | code135 | Supply of LED pole mounting type post top lantern with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate/ clear glass material, delivering superior light outputRated life Burning Hrs 50000 hr@ Lumen Maintenance of 70%, CCT GREATER THAN 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminaire GREATER THAN IK08. Power FactorGREATER THAN0.9 with mains, Surge Protection- Min 5KV along with Over voltage/Overload, short circuit/ miss-wiring protection. Compatible for pole mounting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/1 EC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB LED EfficiencyGREATER THAN1301m/w, nominal CRI GREATER THAN75. Luminaire manufacturer should have in- house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008. Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/ Lumileds/Osram make LED Source. LED Post Top Lantern with 25 W | Each | 7173.0 | 7173.0 | 4.0 | False | None | None | False | None | False | 28692.0 | 0 |
| 3990115 | 154483 | None | code136 | Supplying of .....feet -PVC Batten with integrated LED tube .... W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI GREATER THAN 80. Power Input: 220-240V@ 50/60Hz & Power factor GREATER THAN0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition.LED light fitting 1 x 4,- 20/22 w P/35-47/11.3.2 | Each | 740.0 | 740.0 | 50.0 | False | None | None | False | None | False | 37000.0 | 0 |
| 3990116 | 154483 | None | code137 | Supply of LED floodlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate/clear glass material, delivering superior light output Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, CCT GREATER THAN 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminaire GREATER THAN IK08. Power Factor GREATER THAN0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mauling with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100 V to 270V 50/60Hz application. Compliance to IS 10322/ IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with W System Power consumption. LED EfficiencyGREATER THAN 1301m/w, nominal CRI GREATER THAN75. Luminaire manufacturer should have in- house facility accredited by NABL / CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008. Housing with supplier word mark / name shall be Engraved / Embossing on the die cast housing / Body part Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above. LED Floodlight 70W | No | 7390.0 | 7390.0 | 4.0 | False | None | None | False | None | False | 29560.0 | 0 |
| 3990117 | 154483 | None | code138 | Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076INCH twin twisted PVC insulated wires, required Nos of round blocks and clamps.On wall/ ceiling / Rafter / Girders P45-47/13.7.1 | Each | 119.0 | 119.0 | 58.0 | False | None | None | False | None | False | 6902.0 | 0 |
| 3990118 | 154483 | None | code139 | Supplying and fixing of heavy duty cable glands suitable for UG cable of 1.1 KV class (metal only)25mm dia | Each | 84.0 | 84.0 | 4.0 | False | None | None | False | None | False | 336.0 | 0 |
| 3990119 | 154483 | None | code140 | Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes.25 sqmm Long Barrel | Each | 20.0 | 20.0 | 16.0 | False | None | None | False | None | False | 320.0 | 0 |
| 3990120 | 154483 | None | code141 | Do- 50 sqmm Long Barrel | Each | 60.0 | 60.0 | 8.0 | False | None | None | False | None | False | 480.0 | 0 |
| 3990121 | 154483 | None | code142 | 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip
thickness and resistivity as per IS-3975 16 Sqmm, 4 Core, P/9-27/32 | Mtr | 150.0 | 150.0 | 100.0 | False | None | None | False | None | False | 15000.0 | 0 |
| 3990122 | 154483 | None | code143 | Labour charges for laying of 1.1 KV class UG cable in existing trench GI pipe/ stoneware pipe /on wall / on pole as required.In existing trench/duct.4 sqmm to 16 sqmm P/9-14/31.05 | Mtr | 16.15 | 16.15 | 100.0 | False | None | None | False | None | False | 1615.0 | 0 |
| 3990123 | 154483 | None | code144 | Do- Cutting road surface | Mtr | 82.0 | 82.0 | 50.0 | False | None | None | False | None | False | 4100.0 | 0 |
| 3990124 | 154483 | None | code145 | Do- Hard Soil | Mtr | 15.5 | 15.5 | 50.0 | False | None | None | False | None | False | 775.0 | 0 |
| 3990125 | 154483 | None | code146 | Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40mm dia 2.9mm thick 2.5 mtr long GI pipe with GI funnel with mesh and suitable size reducer fixed on the top of the earth electrode.The funnel should be enclosed in a CC chamber of 400x400x400mm with a cast iron cover. The earth electrode shall have staggered holes of 12mm dia and the electrode should be covered 150mm all-round with alternate layers of salt and charcoal from the bottom of the CC chamber. The connection from the electrode is to be established through GI strip using GI bolts and nuts. | No | 4150.0 | 4150.0 | 2.0 | False | None | None | False | None | False | 8300.0 | 0 |
| 3990126 | 154483 | None | code147 | Supplying and fixing of class A (medium duty) GI pipe of wall thickness not less than 3.25mm on pole/wall/drain crossing with necessary clamping arrangements for UG cable of 1.1KV 100mm P/16-27/49.08 | Mtr | 1528.0 | 1528.0 | 10.0 | False | None | None | False | None | False | 15280.0 | 0 |
| 3990127 | 154483 | None | code148 | Supplying and fixing of round or oblong type bulk head fitting glass cover | No | 68.0 | 68.0 | 8.0 | False | None | None | False | None | False | 544.0 | 0 |
| 3990128 | 154483 | None | code149 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 TV/Telephone Socket | No | 147.0 | 147.0 | 15.0 | False | None | None | False | None | False | 2205.0 | 0 |
| 3990129 | 154483 | None | code150 | Do- RJ45/I.O Outlet Cat-6 | No | 211.0 | 211.0 | 8.0 | False | None | None | False | None | False | 1688.0 | 0 |
| 3990130 | 154483 | None | code151 | Supplying and drawing PVC flexible one pair telephone unarmoured tinned copper cable. 2 Pair | Mtr | 19.0 | 19.0 | 100.0 | False | None | None | False | None | False | 1900.0 | 0 |
| 3990131 | 154483 | None | code152 | Do- 5 Pair | Mtr | 58.0 | 58.0 | 100.0 | False | None | None | False | None | False | 5800.0 | 0 |
| 3990132 | 154483 | None | code153 | Supplying and drawing PVC insulated gas injected physical foam jelly flooded co-axial TV cable.RG-6. | Mtr | 42.0 | 42.0 | 100.0 | False | None | None | False | None | False | 4200.0 | 0 |
| 3990133 | 154483 | None | code154 | Supplying & Fixing of switch mounting rack with power manager & Cable manager.6U with 450mm depth | No | 4657.0 | 4657.0 | 1.0 | False | None | None | False | None | False | 4657.0 | 0 |
| 3990134 | 154483 | None | code155 | Supplying & Fixing of Patch panel for LAN cabling16 Port 10/100/1000 patch panel | No | 8053.0 | 8053.0 | 1.0 | False | None | None | False | None | False | 8053.0 | 0 |
| 3990135 | 154483 | None | code156 | Supplying and fixing of 1.5HP sump motor civil SR 2018-19 Item 212 | No | 17329.0 | 17329.0 | 1.0 | False | None | None | False | None | False | 17329.0 | 0 |
| 3990136 | 154483 | None | code157 | Supplying, installation, testing and commissioning of solar hot water heater comprising of solar Flat Plate Collector (FPC) of size 2120x1040x100mm and stainless steel hot water storage tank with stainless steel heat exchanger absorber made of copper sheet and copper tube of following capacity aluminium box collector with appropriate capacity electrical back up arrangement excluding inlet and out let pipes. SS Model with 100mm thick of 48Kg/M3density Rock wool insulation with 22SWG Aluminium cladding. 100 L | No | 32743.0 | 32743.0 | 1.0 | False | None | None | False | None | False | 32743.0 | 0 |