createdTs	None
version	None
createdDate	None
modifiedDate	None
noticeInvitingTenderDTO	createdTs 1726146127799 version 3 createdDate None modifiedDate None tenderType RFQ evaluationType TWO_COVER evaluationTypeText Two Cover invitingStrategy OPEN invitingStrategyText Open taxType INCLUSIVE_TAX tenderFee 1690.00 emd 160000.00 bidValueType ITEM_WISE bidValueTypeText Item wise tenderReceiptClose 24-09-2024 16:30:00 tenderQueryClose 24-09-2024 15:30:00 technicalBidOpen 25-09-2024 17:30:00 publishedDate 17-09-2024 10:17:42 publishedByPost RDPR_EE_DIV_BLR publishedByUser KPE19203 - H INDUDHAR bidValidityPeriod 90 noOfCalls 1 preBidMeetingDate None preBidMeetingYn False preQualificationBidOpen None denominationType RUPEES denominationTypeText Rupees retenderedYn None percentageRateTypeText None contactPerson EE PRE DIVISION BALLARI splitEmdRequiredYn False emdBankGuarantee None emdCash None bgValidityPeriod None hideWeightage None multipleCurrencySelectionAllowedYn False isTechWeightageAllowed False highestBidderSelection False isVariableEmdAllowed None qcbsTenderYn None itemwiseEmdRequiredYn None sampleSubmissionDate None officeNumber 08392266173 mobileNumber None tenderSupplierList None
tenderSchedule	createdTs 1726146127847 version 4 createdDate None modifiedDate None tenderNumber RDPR/2024-25/BD/WORK_INDENT8753 title Construction of Taluk Panchayath Building (Spillover work) at Kampli in Ballari Dist. description Construction of Taluk Panchayath Building (Spillover work) at Kampli in Ballari Dist. category WORKS categoryText Works ecv 6757068.68 deptName Rural Development and Panchayat Raj Department status PUBLISHED statusText Published remarks None csrValue None ecvtenderYn True location 818 locationName RDPR Division Office Ballari provisionalAmount 8000000.0 groupOverheadTotal None fileNumber AEE/RDPR/SD/BLR/JE-1/ZP/2024-25/7
tenderSubEstimateList	createdTs version createdDate modifiedDate workCategoryName subEstimateName estimateTotal itemList 1726146128000 0 None None Buildings Construction of TP Building (Contituation work) at Kampli village in Ballari Dist. 6202987.48 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3990948 154496 None code01 Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work. In all kinds of soils upto 300 mm depth Cum 99.75 99.75 13.5 False None None False None False 1346.625 0 3990949 154496 None code02 Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 l/Sqm including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications. Sqm 123.9 123.9 54.0 False None None False None False 6690.6 0 3990950 154496 None code03 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In all kinds of soils Depth upto 3 m Cum 107.1 107.1 19.17 False None None False None False 2053.107 0 3990951 154496 None code04 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates Cum 6288.45 6288.45 21.71 False None None False None False 136522.2495 0 3990952 154496 None code05 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. Cum 279.3 279.3 5.56 False None None False None False 1552.908 0 3990953 154496 None code06 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. Sqm5 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 6633.15 6633.15 2.56 False None None False None False 16980.864 0 3990954 154496 None code07 Additionalities for Formwork, Centering andScaffolding for footing Cum 532.22 532.22 2.56 False None None False None False 1362.4832 0 3990955 154496 None code08 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. Sqm5 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 6652.8 6652.8 0.47 False None None False None False 3126.816 0 3990956 154496 None code09 Additionalities for Formwork, Centering andScaffolding 70% for Columns Cum 4656.96 4656.96 0.47 False None None False None False 2188.7712 0 3990957 154496 None code10 Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. Sqm5 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 6804.0 6804.0 1.45 False None None False None False 9865.8 0 3990958 154496 None code11 Additionalities for Formwork, Centering andScaffolding 50% for Plinth beam Cum 3402.0 3402.0 1.45 False None None False None False 4932.9 0 3990959 154496 None code12 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. Sqm5 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 7185.15 7185.15 0.95 False None None False None False 6825.8925 0 3990960 154496 None code13 Additionalities for Formwork, Centering andScaffolding 70% for Columns Cum 5029.61 5029.61 0.95 False None None False None False 4778.1295 0 3990961 154496 None code14 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. Sqm5 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 7185.15 7185.15 10.1 False None None False None False 72570.015 0 3990962 154496 None code15 Additionalities for Formwork, Centering andScaffolding 60% for Lintel beam Cum 4311.09 4311.09 2.17 False None None False None False 9355.0653 0 3990963 154496 None code16 Additionalities for Formwork, Centering andScaffolding 50% for Roof slab and Stair case Cum 3592.58 3592.58 10.1 False None None False None False 36285.058 0 3990964 154496 None code17 Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Buildings Tonne 93929.85 93929.85 1.43 False None None False None False 134319.6855 0 3990965 154496 None code18 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. Cum 8367.45 8367.45 3.62 False None None False None False 30290.169 0 3990966 154496 None code19 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1 cement : 3 coarse sand) finished rough with sponge to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 404.25 404.25 36.33 False None None False None False 14686.4025 0 3990967 154496 None code20 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 133.35 133.35 1091.37 False None None False None False 145534.1895 0 3990968 154496 None code21 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 182.7 182.7 279.56 False None None False None False 51075.612 0 3990969 154496 None code22 Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 L/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 297.15 297.15 84.0 False None None False None False 24960.6 0 3990970 154496 None code23 Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 55.65 55.65 69.55 False None None False None False 3870.4575 0 3990971 154496 None code24 Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @0.75 L/10 m² of approved brand and manufacture to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering and knotting , cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 144.9 144.9 69.55 False None None False None False 10077.795 0 3990972 154496 None code25 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 120.75 120.75 65.16 False None None False None False 7868.07 0 3990973 154496 None code26 Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ Sqm including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600x600 mm Sqm 1233.75 1233.75 234.66 False None None False None False 289511.775 0 3990974 154496 None code27 Providing and laying Polished Sadarahalli Grey Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 20 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Sqm 2189.25 2189.25 153.89 False None None False None False 336903.6825 0 3990975 154496 None code28 Providing edge moulding to 18mm thick Granite stone counters, vanities etc including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge. m 344.4 344.4 77.54 False None None False None False 26704.776 0 3990976 154496 None code29 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thick- ness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ Sqm including pointing the joints with white cement and matching pigments etc., complete. Sqm 933.45 933.45 31.46 False None None False None False 29366.337 0 3990977 154496 None code30 Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. Sqm 1461.6 1461.6 114.14 False None None False None False 166827.024 0 3990978 154496 None code31 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Kg 593.25 593.25 123.3 False None None False None False 73147.725 0 3990979 154496 None code32 Providing and fixing granite stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal parti- tions by cutting a chase of appropriate width with chase cutter and embed- ding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in- charge and finished smooth. Sqm 2928.45 2928.45 1.35 False None None False None False 3953.4075 0 3990980 154496 None code33 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. Sqm5 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 7257.0 7257.0 10.38 False None None False None False 75327.66 0 3990981 154496 None code34 Additionalities for formwork, Centering and Scaffolding 70% for Columns Cum 5079.9 5079.9 10.38 False None None False None False 52729.362 0 3990982 154496 None code35 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. Sqm5 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 7257.0 7257.0 42.27 False None None False None False 306753.39 0 3990983 154496 None code36 Additionalities for formwork, Centering and Scaffolding 60% for Beam & Lintel Cum 4354.2 4354.2 10.67 False None None False None False 46459.314 0 3990984 154496 None code37 Additionalities for formwork, Centering and Scaffolding 50% for Roof Slab and Staircase Cum 3628.5 3628.5 31.61 False None None False None False 114696.885 0 3990985 154496 None code38 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. Sqm0 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 7031.12 7031.12 1.32 False None None False None False 9281.0784 0 3990986 154496 None code39 Additionalities for formwork, Centering and Scaffolding 45% for Chejjas Cum 3164.0 3164.0 1.32 False None None False None False 4176.48 0 3990987 154496 None code40 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 Using 20 mm nominal size graded crushed coarse aggregates Cum 6593.13 6593.13 2.59 False None None False None False 17076.2067 0 3990988 154496 None code41 Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Buildings Tonne 94869.15 94869.15 5.09 False None None False None False 482883.9735 0 3990989 154496 None code42 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. Cum 8451.12 8451.12 66.88 False None None False None False 565210.9056 0 3990990 154496 None code43 Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in foundations and plinth in Cement mortar 1:3 (1 cement : 3 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. Sqm 1063.68 1063.68 18.89 False None None False None False 20092.9152 0 3990991 154496 None code44 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. Cum 104793.31 104793.31 0.34 False None None False None False 35629.7254 0 3990992 154496 None code45 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. No. 1077.47 1077.47 5.0 False None None False None False 5387.35 0 3990993 154496 None code46 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification. 35 mm thick one side teak and one side commercial Sqm 4132.77 4132.77 15.12 False None None False None False 62487.4824 0 3990994 154496 None code47 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 850 kg/Cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mSqm , modulus of elasticity 900 N/mSqm and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-InCharge. (Fixtures shall be paid for separately) Size 62 x 125mm m 802.2 802.2 11.4 False None None False None False 9145.08 0 3990995 154496 None code48 Providing and fixing factory made 18 mm thick single extruded WPC (Wood Polymer Composite) solid plain white colour board Jali, CNC (Computer Numeric Control) routed of approved design by Engineer-incharge which are machine cut for duct/shaft covering, partitions and facades comprising of virgin Polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) having minimum density of 650 kg/Cum and screw withdrawal strength of 1800 N (Face) minimum compressive strength 50 N/mSqm , modulus of elasticity 850 N/mSqm and resistance to spread of flame of Class A category with properties of being termite/borer proof, water/moisture proof and fire retardant and fixing as per requirement at site with necessary stainless steel fasteners and SS screws etc., all complete as per direction of Engineer-In-Charge. (Note: M.S framework required with priming coat shall be paid separately). Sqm 4631.55 4631.55 3.15 False None None False None False 14589.3825 0 3990996 154496 None code49 Providing & fixing of 2-track x 2-panel sliding windows made out of multi chambered UPVC (Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 50mm width x 42mmheight with reinforcement of 1mm thickness and Sash with overall size of 31mm X 57mm with Gi reinforcement of 1mm for the frame and 1.5 mm for the sash. Coextruded Glazing bead for fixing of glass shall be of size 21.5mm x 9.5 mm. Windows shall be provided with 5mm plain float glass, standard hardware& single point locking system with touch lock. Wall thickness of frame & sash shall be of 1.8+-0.2 mm. Maximum possible size 1519mm x 1519mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) Sqm 5716.1 5716.1 36.9 False None None False None False 210924.09 0 3990997 154496 None code50 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) Sqm 6004.95 6004.95 1.35 False None None False None False 8106.6825 0 3990998 154496 None code51 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding Kg 178.16 178.16 954.45 False None None False None False 170044.812 0 3990999 154496 None code52 Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 270.43 270.43 467.29 False None None False None False 126369.2347 0 3991000 154496 None code53 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1 cement : 3 coarse sand) finished rough with sponge to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 408.29 408.29 412.68 False None None False None False 168493.1172 0 3991001 154496 None code54 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 295.88 295.88 43.72 False None None False None False 12935.8736 0 3991002 154496 None code55 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. Sqm 106.05 106.05 657.0 False None None False None False 69674.85 0 3991003 154496 None code56 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 134.68 134.68 657.0 False None None False None False 88484.76 0 3991004 154496 None code57 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 184.53 184.53 314.19 False None None False None False 57977.4807 0 3991005 154496 None code58 Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 L/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 300.12 300.12 98.5 False None None False None False 29561.82 0 3991006 154496 None code59 Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 56.21 56.21 21.17 False None None False None False 1189.9657 0 3991007 154496 None code60 Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @0.75 L/10 m² of approved brand and manufacture to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering and knotting , cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 146.35 146.35 21.17 False None None False None False 3098.2295 0 3991008 154496 None code61 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 121.96 121.96 43.29 False None None False None False 5279.6484 0 3991009 154496 None code62 Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ Sqm including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600x600 mm Sqm 1246.09 1246.09 140.74 False None None False None False 175374.7066 0 3991010 154496 None code63 Providing and laying Polished Sadarahalli Grey Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 20 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Sqm 2211.14 2211.14 70.89 False None None False None False 156747.7146 0 3991011 154496 None code64 Providing edge moulding to 18mm thick Granite stone counters, vanities etc including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge. m 347.84 347.84 37.01 False None None False None False 12873.5584 0 3991012 154496 None code65 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thick- ness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ Sqm including pointing the joints with white cement and matching pigments etc., complete. Sqm 933.45 933.45 10.53 False None None False None False 9829.2285 0 3991013 154496 None code66 Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. Sqm 1461.6 1461.6 45.97 False None None False None False 67189.752 0 3991014 154496 None code67 Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. M.S. tube including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Kg 146.35 146.35 64.8 False None None False None False 9483.48 0 3991015 154496 None code68 Newly Constructed Roof/Bathroom/Toilet/balcony/utility with Cementatius Waterproof coating - Below 500 Sqm Providing and Applying CFTRI approved two component flexible polymer modified acrylic cementitious waterproofing coating with a mix ratio of (5 Liquid :7 Powder) to the RCC surface like Roof, bathroom, toilet, balcony & utility area applied @ 2.2kg/Sqm in 2 coats to achieve 1.2mm DFT, having Elongation at break less than120% as per ASTM D 412, Tensile strength less than1N/ mSqm as per ASTM D 412, Adhesion strength: 0.80N/mSqm as per ASTM D 4541, crack bridging upto 2mm as per ASTM C 836. The finished cost to include surface preparation, making coving of 50 mm X 50mm at all right angles of wall Junction with Polymer Repair Mortar and lay 45 gsm glass fibre mesh over the angle fillet when the first coat in still wet, treatment of cracks completely as per specification. Sqm 556.76 556.76 10.53 False None None False None False 5862.6828 0 3991016 154496 None code69 Providing and applying two coats of High Albedo paint having minimum Solar Reflective Index (SRI) 108 (with solar reflectance & thermal remittance tested as per ASTM) C 1549 and ASTM C 1371 respectively), VOC less than 10 cc/g. The coating thickness and the methodology of application shall strictly as per manufacturer's specifications and as approved by Engineer-in-Charge. Surface preparation includes cleaning with metal wire brush to remove all dust, fungus etc., washing with water all complete. The contractor shall give guarantee for the performance of SRI and also the durability of coating, all complete as per direction of Engineer-in-Charge. Sqm 431.62 431.62 215.53 False None None False None False 93027.0586 0 3991017 154496 None code70 Providing and fixing 6mm Clear/opal white/solar bronze/blue/green tinted Multi wall poly carbonate sheet for Tubular structure. The work including cost of all materials, labour charges and usage charges of machinery for cutting, welding, grinding and erection equipments, with all lead, transportation, loading and unloading and all other incidental charges etc. complete as per specification and directions of the Engineer in charge of the work. Sqm 3314.06 3314.06 19.2 False None None False None False 63629.952 0 3991018 154496 None code71 Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in- Charge. Kg 119.84 119.84 410.0 False None None False None False 49134.4 0 3991019 154496 None code72 Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete No. 251.34 251.34 8.0 False None None False None False 2010.72 0 3991020 154496 None code73 Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : 100x70x4 mm (ordinary type) No. 148.47 148.47 24.0 False None None False None False 3563.28 0 3991021 154496 None code74 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete No. 137.87 137.87 8.0 False None None False None False 1102.96 0 3991022 154496 None code75 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. No. 127.26 127.26 8.0 False None None False None False 1018.08 0 3991023 154496 None code76 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In all kinds of soils Depth upto 3 m Cum 107.1 107.1 52.2 False None None False None False 5590.62 0 3991024 154496 None code77 Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5 m. Including cost of all labour complete as per specifications Cum 168.0 168.0 52.2 False None None False None False 8769.6 0 3991025 154496 None code78 Providing and fixing brass bib cock of approved quality : 20 mm nominal bore No. 320.25 320.25 12.0 False None None False None False 3843.0 0 3991026 154496 None code79 Providing and fixing in position brass PUSH cock of approved quality 20mm nominal bore including cost of all materials, labour and HOM of equipments with all leads complete as per specifications. (In Hand Wash) DR No 168.0 168.0 10.0 False None None False None False 1680.0 0 3991027 154496 None code80 Providing and fixing brass stop cock of approved quality :20 mm nominal bore No. 320.25 320.25 5.0 False None None False None False 1601.25 0 3991028 154496 None code81 Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) :40 mm nominal bore No. 737.1 737.1 1.0 False None None False None False 737.1 0 3991029 154496 None code82 Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) :50 mm nominal bore No. 897.75 897.75 1.0 False None None False None False 897.75 0 3991030 154496 None code83 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 20 mm nominal bore No. 329.7 329.7 1.0 False None None False None False 329.7 0 3991031 154496 None code84 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 25 mm nominal bore No. 348.6 348.6 1.0 False None None False None False 348.6 0 3991032 154496 None code85 Providing and fixing gun metal non- return valve of approved quality (screwed end) : 25 mm nominal bore Horizontal No. 651.0 651.0 1.0 False None None False None False 651.0 0 3991033 154496 None code86 Providing and fixing gun metal non- return valve of approved quality (screwed end) :32 mm nominal bore Vertical No. 849.45 849.45 1.0 False None None False None False 849.45 0 3991034 154496 None code87 Providing and fixing unplasticised PVC connection pipe with brass unions : 30 cm length 15 mm nominal bore No. 87.15 87.15 3.0 False None None False None False 261.45 0 3991035 154496 None code88 Providing and fixing Chlorinated Polyveny Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20 mm nominal dia pipes m 397.95 397.95 40.0 False None None False None False 15918.0 0 3991036 154496 None code89 Providing and fixing Chlorinated Polyveny Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 25 mm nominal dia pipes m 500.85 500.85 30.0 False None None False None False 15025.5 0 3991037 154496 None code90 Providing and fixing Chlorinated Polyveny Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 32 mm nominal dia pipes m 584.85 584.85 22.0 False None None False None False 12866.7 0 3991038 154496 None code91 Providing and fixing Chlorinated Polyveny Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 25 mm nominal dia Pipes m 333.9 333.9 50.0 False None None False None False 16695.0 0 3991039 154496 None code92 Providing and fixing Chlorinated Polyveny Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 32 mm nominal dia Pipes m 420.0 420.0 30.0 False None None False None False 12600.0 0 3991040 154496 None code93 Providing and fixing in position / brass / gun metal easy clean strainer of approved make with stainless steel strainer etc.., complete -PVC- Supreme/Prince / Mahesh m 3858.0 3858.0 2.0 False None None False None False 7716.0 0 3991041 154496 None code94 Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete. m 52.5 52.5 20.0 False None None False None False 1050.0 0 3991042 154496 None code95 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 100 mm diameter m 305.55 305.55 40.0 False None None False None False 12222.0 0 3991043 154496 None code96 Providing, lowering, laying, jointing, testing and commissioning of Glazed Stone Ware Pipes of following dia, conforming to IS 651:1992, IS 4127 with latest amendments, including conveying to work site, caulking with hemp dipped in tar and jointing with CM 1:1.5 using OPC, perfect linking and curing for 10 days and testing with water etc. with all lead, lifts and as per Technical Specifications. The cost to include the cost of all jointing materials, necessary survey works for laying of sewer lines etc. complete. The contractor will make own arrangements for procuring water for testing. 150 mm dia. pipes m 610.05 610.05 30.0 False None None False None False 18301.5 0 3991044 154496 None code97 Constructing brick masonry chamber of internal dimension 600x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover. Each 5030.55 5030.55 2.0 False None None False None False 10061.1 0 3991045 154496 None code98 Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover.. Each 5726.7 5726.7 2.0 False None None False None False 11453.4 0 3991046 154496 None code99 KSRB 12-7.1: Making connection of drain or sewer line of size 100 to 230mm external dia with existing manhole including breaking into and making good the walls, floors with cement concrete M 15 with 20mm and downsize granite metal, cement plastered on both sides of mix 1:3, finished with a floating coat of neat cement, and making necessary channels for the drain, including cost of materials, labour charges, curing complete as per specifications. Specification No. KBS No. 2828.7 2828.7 1.0 False None None False None False 2828.7 0 3991047 154496 None code100 Providing and fixing white vitreous china wash basin including making all connections but including the cost of fittings :Flat back wash basin of size 630x450 mm Each 1035.3 1035.3 3.0 False None None False None False 3105.9 0 3991048 154496 None code101 C.P. Brass piller tap elbow operated for sinks Unit 650.0 650.0 3.0 False None None False None False 1950.0 0 3991049 154496 None code102 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 453x357 mm Each 1068.9 1068.9 8.0 False None None False None False 8551.2 0 3991050 154496 None code103 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g. Each 520.8 520.8 8.0 False None None False None False 4166.4 0 3991051 154496 None code104 Providing and fixing CI Nahani trap of approved make conforming to ISI specifications and construction of Cistern in M-15 as per directions (Rate is inclusive of cost of materials and fixtures and conveyance of materials to work spot). --do-10cms x 7.5cms Each 262.5 262.5 20.0 False None None False None False 5250.0 0 3991052 154496 None code105 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. l 9.45 9.45 4000.0 False None None False None False 37800.0 0 3991053 154496 None code106 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests Each 5128.2 5128.2 2.0 False None None False None False 10256.4 0 3991054 154496 None code107 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid Each 6275.85 6275.85 3.0 False None None False None False 18827.55 0 3991055 154496 None code108 Supplying and fixing of 2/1.5 H.P. Monolbock Pump of approved make with all accessories conforming to ISI specification including cost of all materials, labour, with all lead and lift etc. complete as per directions of the Engineer-in-cahrge of the work. With all lead and lifts etc., complete as per specification and as per the directions of the Engineer- In-Charge of the work. No. 11443.95 11443.95 1.0 False None None False None False 11443.95 0 3991056 154496 None code109 Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary 19/20 mm dia 2 mm thick m 66.0 66.0 300.0 False None None False None False 19800.0 0 3991057 154496 None code110 Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary 25 mm dia 2 mm thick m 78.0 78.0 100.0 False None None False None False 7800.0 0 3991058 154496 None code111 Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary 32 mm dia 2.5 mm thick m 103.0 103.0 50.0 False None None False None False 5150.0 0 3991059 154496 None code112 Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary 40 mm dia 2.5 mm thick m 147.0 147.0 30.0 False None None False None False 4410.0 0 3991060 154496 None code113 Supplying and fixing sheet Metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc. 75 x 75 x 65 mm Each 106.0 106.0 6.0 False None None False None False 636.0 0 3991061 154496 None code114 Supplying and fixing sheet Metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc. 100 x 75 x 65 mm Each 118.0 118.0 4.0 False None None False None False 472.0 0 3991062 154496 None code115 Supplying and fixing sheet Metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc. 135 x 75 x 65 mm Each 139.0 139.0 1.0 False None None False None False 139.0 0 3991063 154496 None code116 Supplying and fixing sheet Metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc. 180 x 90 x 65 mm Each 161.0 161.0 3.0 False None None False None False 483.0 0 3991064 154496 None code117 Supplying and fixing sheet Metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc. 200 x 90 x 65 mm Each 179.0 179.0 1.0 False None None False None False 179.0 0 3991065 154496 None code118 Supplying and fixing sheet Metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc. 200 x 200 x 65 mm Each 348.0 348.0 1.0 False None None False None False 348.0 0 3991066 154496 None code119 Supplying and fixing PVC/metal conduit Deep junction box 19/20 mm deep Junction box Each 49.0 49.0 40.0 False None None False None False 1960.0 0 3991067 154496 None code120 Supplying and fixing PVC/metal conduit Deep junction box 25 mm deep Junction box Each 56.0 56.0 20.0 False None None False None False 1120.0 0 3991068 154496 None code121 Extra for Groove cutting in brick wall/CC floor to the suitable depth for concealing of Conduit/GI pipe and plastering, finishing upto wall surface complete. upto 50 mm conduit in brick wall m 29.0 29.0 180.0 False None None False None False 5220.0 0 3991069 154496 None code122 Supplying And Fixing Metal Fan Box with Round Hook. No 117.0 117.0 20.0 False None None False None False 2340.0 0 3991070 154496 None code123 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Short point upto 3Mtr from tapping point to out let via switch box Point 269.0 269.0 10.0 False None None False None False 2690.0 0 3991071 154496 None code124 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Medium point above 3Mtr upto 6Mtr from tapping point to out let via switch box Point 379.0 379.0 5.0 False None None False None False 1895.0 0 3991072 154496 None code125 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:2010 1.5 sqmm m 26.0 26.0 900.0 False None None False None False 23400.0 0 3991073 154496 None code126 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:2010 2.5 sqmm m 42.0 42.0 600.0 False None None False None False 25200.0 0 3991074 154496 None code127 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:2010 4 sqmm m 63.0 63.0 200.0 False None None False None False 12600.0 0 3991075 154496 None code128 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:2010 6 sqmm m 92.0 92.0 180.0 False None None False None False 16560.0 0 3991076 154496 None code129 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.3 Module Each 161.0 161.0 6.0 False None None False None False 966.0 0 3991077 154496 None code130 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 4 Module Each 175.0 175.0 4.0 False None None False None False 700.0 0 3991078 154496 None code131 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 6 Module Each 234.0 234.0 1.0 False None None False None False 234.0 0 3991079 154496 None code132 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 8 Module Each 284.0 284.0 3.0 False None None False None False 852.0 0 3991080 154496 None code133 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 10-12 Module Each 363.0 363.0 1.0 False None None False None False 363.0 0 3991081 154496 None code134 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 16 Module Each 397.0 397.0 1.0 False None None False None False 397.0 0 3991082 154496 None code135 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A One Way Switch Each 102.0 102.0 100.0 False None None False None False 10200.0 0 3991083 154496 None code136 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A Two Way Switch Each 166.0 166.0 2.0 False None None False None False 332.0 0 3991084 154496 None code137 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator Two Module Each 357.0 357.0 40.0 False None None False None False 14280.0 0 3991085 154496 None code138 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 16A One Way Switch Each 180.0 180.0 30.0 False None None False None False 5400.0 0 3991086 154496 None code139 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 32A DP Switch Each 326.0 326.0 20.0 False None None False None False 6520.0 0 3991087 154496 None code140 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16A Universal Socket Each 236.0 236.0 25.0 False None None False None False 5900.0 0 3991088 154496 None code141 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. TV/Telephone Socket Each 156.0 156.0 1.0 False None None False None False 156.0 0 3991089 154496 None code142 Supplying and fixing 32A security and energy saving DP switch with key tag suitable to operate on 230 V, 50Hz AC supply & completely wired on existing box. Each 646.0 646.0 1.0 False None None False None False 646.0 0 3991090 154496 None code143 Supplying fully automatic star-delta starter unit push button type with suitable wires, 3 contactors, one adjustable thermal timer mounted on a common base plate held in steel enclosure for use on 400/440 V 3 phase and wired after fixing to the existing wooden board for motor. upto 12.5 HP Each 7455.0 7455.0 1.0 False None None False None False 7455.0 0 3991091 154496 None code144 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 6-32 A SP Each 415.0 415.0 3.0 False None None False None False 1245.0 0 3991092 154496 None code145 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 6-32 A DP Each 739.0 739.0 2.0 False None None False None False 1478.0 0 3991093 154496 None code146 Supplying and fixing regular MCB distribution boards on wall/wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS enclosure. II - Double Door 12 Way SP & N Each 2329.0 2329.0 3.0 False None None False None False 6987.0 0 3991094 154496 None code147 Supplying and fixing regular MCB distribution boards on wall/wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS enclosure. III - Double Door 4 Way TP & N Each 4038.0 4038.0 2.0 False None None False None False 8076.0 0 3991095 154496 None code148 Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of percentage leakage current, programmable delay/auto/ manual reset facility suitable to mount on DIN rail/ flush mounting on panel board. Each 9255.0 9255.0 1.0 False None None False None False 9255.0 0 3991096 154496 None code149 Supplying ......... A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete 250 A 4 x 30 x 10 mm Aluminium Strips m 3435.0 3435.0 3.0 False None None False None False 10305.0 0 3991097 154496 None code150 Supplying ......... A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete 400 A 4 x 50 x 10 mm Aluminium Strips m 4445.0 4445.0 1.0 False None None False None False 4445.0 0 3991098 154496 None code151 Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, kVA, kWH, kVAR suitable for 3 phase, 4 wire LT network with IP 54 degree of protection and completely wired as required with communication Port and Class 0.5s accuracy Each 9315.0 9315.0 1.0 False None None False None False 9315.0 0 3991099 154496 None code152 Supplying and fixing Electronic Trivector Meter (ETV) suitable for operation LT operation and -CT operated meter in polycarbonate body in class 0.5 accuracy as per IS 14697 and completely wired. Each 4390.0 4390.0 1.0 False None None False None False 4390.0 0 3991100 154496 None code153 Earthing: Supplying and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit. The pits should be filled up with equal proportion of salt and charcoal 150mm around the pipe to complete depth. The connection from the pipe to the conduits etc. is to established through GI wire of sizes as per clause 7.3.3 of IS 732 using 12mm bolts, nuts, washers and check nuts, the pipe shall have 16 through holes of 12mm dia. Job 3750.0 3750.0 1.0 False None None False None False 3750.0 0 3991101 154496 None code154 Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVC extruded Inner sheath armoured UG LT cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness in average +5% and resistivity 14 Ohms/Kms m 139.54 139.54 35.0 False None None False None False 4883.9 0 3991102 154496 None code155 Labour charges for laying of 1.1 KV class UG cable in existing trench GI pipe / stoneware pipe/ on wall/on pole as required. m 23.64 23.64 35.0 False None None False None False 827.4 0 3991103 154496 None code156 Digging of trench of 0.6m deep x 0.50 mtr wide refilling the trench to the required ground level and consolidating etc.,complete. m 889.0 889.0 35.0 False None None False None False 31115.0 0 3991104 154496 None code157 Refilling the cable trenches with selected available earth from trench excavation including watering, consolidation in layers of 15 cm. Thickness including depositing of the surplus earth with a lead of 200 Mtr m 58.0 58.0 35.0 False None None False None False 2030.0 0 3991105 154496 None code158 Epoxy Terminating Kit (Pothead) suitable for 1.1KV,LTUG cable Each 382.0 382.0 10.0 False None None False None False 3820.0 0 3991106 154496 None code159 Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete. 12" Sweep (300 mm) Each 2969.0 2969.0 4.0 False None None False None False 11876.0 0 3991107 154496 None code160 Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball bearing system 48" Sweep (1200 mm) Regular model Each 2984.0 2984.0 35.0 False None None False None False 104440.0 0 3991108 154496 None code161 Supplying of .....feet -PVC Batten with integrated LED tube W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI less than 80. Power Input: 220-240V@ 50/60Hz & Power factor less than0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. LED light fitting 1 x 4' - 20/22 W Each 690.0 690.0 20.0 False None None False None False 13800.0 0 3991109 154496 None code162 Supply of round/square recess/surface mounted rolling type LED Down light with ...... W GU 10 LED Lamp Rib Fabricated from diecast aluminium with white powder coated prewired to mains connector & has swivelling unit of aluminium die cast eye ball & LED Lamp position retained by circular wire spring, with Life of 25000 burning hours & 70% lumen maintenance with CRI less than 80. Power Input: 220-240V @50/60Hz & Power factor less than0.9 along with CE approved. 2years Warranty against any manufacturing defect working under standard electrical condition LED square or round down light 10-12W Each 885.0 885.0 25.0 False None None False None False 22125.0 0 3991110 154496 None code163 Supplying and fixing of 5'-80 W of T8 Fluorescent Tube with 54W power consumption with low 3mg Mercury content less phosphor coating Operating voltage range from 180V to 265V, 50Hz AC power Supply No 520.0 520.0 30.0 False None None False None False 15600.0 0 3991111 154496 None code164 Supplying of patty fitting, made out of CRCA Sheet metal body with locking type holder completely wired with HF Electronic Ballast, Operating voltage range from 180V to 265V, 50Hz AC power supply excluding Tube. 1 x 4' Tube light fitting. Each 340.0 340.0 20.0 False None None False None False 6800.0 0 3991112 154496 None code165 Supplying & Fixing of 70-150 W lamp holder 2 Pin No 63.0 63.0 15.0 False None None False None False 945.0 0 3991113 154496 None code166 Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, required Nos of round blocks and clamps. On wall/ ceiling / Rafter / Girders Each 122.0 122.0 75.0 False None None False None False 9150.0 0 3991114 154496 None code167 Fixing a ceiling /wall mounting fan of all capacities and all types, with necessary clamps and 'S' hook made out of 15mm dia MS rod, with 5 A. ceiling rose of approved quality with necessary length of 23/0.0076 inch PVC insulated twin twisted wire of approved quality, mounted on a suitable size wooden board and wired. Each 315.0 315.0 35.0 False None None False None False 11025.0 0 3991115 154496 None code168 Fixing one exhaust fan after making a suitable notch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 A, ceiling rose with sufficient length of 23 / 0.0076 inch PVC insulated twin core wire of approved make with wire mesh and wooden frame. Each 707.0 707.0 4.0 False None None False None False 2828.0 0 3991116 154496 None code169 Fixing all types and all capacities of 1'x4' / 2'x2' LED Light fittings indoor on the wall / ceiling / rafters / girders with necessary supporting frame, using 2310.0076" twin twisted PVC insulated wires, required Nos of round blocks and clamps. Each 490.0 490.0 25.0 False None None False None False 12250.0 0 3991117 154496 None code170 Supplying, fixing and wiring 50/5 to 400/5A 5VA burden Current Transformer Class 0.5 accuracy with Tape Wound. Each 562.0 562.0 2.0 False None None False None False 1124.0 0 3991118 154496 None code171 Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C. Each 515.0 515.0 3.0 False None None False None False 1545.0 0 3991119 154496 None code172 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In all kinds of soils Depth upto 3 m Cum 107.1 107.1 39.59 False None None False None False 4240.089 0 3991120 154496 None code173 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. Cum 279.3 279.3 1.36 False None None False None False 379.848 0 3991121 154496 None code174 Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with :Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 5891.55 5891.55 8.99 False None None False None False 52965.0345 0 3991122 154496 None code175 Providing and Filling in foundation with granite / trap broken metal 100mm. and down size & with approved sand including hand packing, ramming, watering, including cost of all materials and labour with all lead and lift complete as per specifications. Cum 2816.1 2816.1 5.03 False None None False None False 14164.983 0 3991123 154496 None code176 Brick Bats Sqm 840.0 840.0 4.42 False None None False None False 3712.8 0 3991124 154496 None code177 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. Sqm5 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 10777.73 10777.73 1.14 False None None False None False 12286.6122 0 3991125 154496 None code178 Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Buildings Tonne 93929.85 93929.85 0.18 False None None False None False 16907.373 0 3991126 154496 None code179 Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. complete For: PVC pipes 140mm dia., 6 kg/sqcm & class 3 m 613.2 613.2 2.0 False None None False None False 1226.4 0 3991127 154496 None code180 Providing to work spot rolling, lowering and placing in position RCC perforated rings in the already excavated pit including loading and unloading at both the destinations with all lead and lift with appurtenances., complete. Sqm 6464.85 6464.85 2.0 False None None False None False 12929.7 0 3991128 154496 None code181 Geophysical investigation at site for sinking borewells for Providing drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical sounding by adopting Venner or Schlumbergers's method, including reconnaissance survey of geological formation. Geophysical investigation of existing ground water in the vicinity, its quality, quantity and acceptability of the users, indicating the location of the site, recommended depth of casing pipe required to seal the top unconsolidated formation including an extra depth of 1.0 metre in consolidated formation for proper seating of casing pipe, depth of drilling required to cover full depth of aquifer proposed to be tapped, probable yield and other information required including transportation of instruments and accessories to work site, engaging technical personal and labour required etc. NOTE: 1) Additional rate on item 1&2 is allowed for drilling in over burden and fixing Casing pipes beyond 20 M (for fixing Casing pipes only) a) Above 20 M and upto 30 M - 15%, b) Above 30 M - 30% (Measurement of overburden is restricted to the depth of casing pipe fixed excluding initial depth of 20M and projection above ground level). 2) A sum of Rs. 100/- is to be deducted for Dry Borewell towards yield test. etc. complete. Each 5552.4 5552.4 1.0 False None None False None False 5552.4 0 3991129 154496 None code182 Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete ) (Above 450m of drilling add 10% for every 50m depth) Borewell depth of 0 to 50 Mtrs m 388.5 388.5 50.0 False None None False None False 19425.0 0 3991130 154496 None code183 Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. complete For: PVC pipes 200mm dia., 6 kg/sqcm & class 3 m 1170.75 1170.75 50.0 False None None False None False 58537.5 0 3991131 154496 None code184 Providing and fixing MS casing collars as per IS 1239 (part-II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum). The dimensions of caps and colars shall be strictly as per IS 1239 (Part-II) 1982 with all amendments Each 157.5 157.5 1.0 False None None False None False 157.5 0 3991132 154496 None code185 Providing and laying at site of work MS casing caps as per IS 1239 (part- II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum). The dimensions of caps and colars shall be strictly as per IS 1239 (Part-II) 1982 with all amendments including cost of material and labour charges for fixing, if any etc. complete with all lead and lifts and as directed by the Engineer in charge Each 172.2 172.2 1.0 False None None False None False 172.2 0 3991133 154496 None code186 Providing Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications, to work site as per necessary ammendments and instructions of engineer incharge of work. For 3 HP etc. complete. 3.00 HP - 135 LPM @ 56 m = 8 STG Outlet Dia - 2.00" Each 27205.5 27205.5 1.0 False None None False None False 27205.5 0 3991134 154496 None code187 Supply and delivery at site of brand new best make pressure gauge bourdon type as per IS 778/1984 with ISI Mark and as per its latest amendments. Size 100 mm Each 16695.0 16695.0 1.0 False None None False None False 16695.0 0 3991135 154496 None code188 Providing, Laying and Fixing of GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, including testing for water tightness, with all lead and commissioning. (contractor will make his own arrangements for procuring water for testing) For:Heavy Duty GI Pipe etc. complete. Heavy Duty GI pipe of 40mm dia m 522.9 522.9 50.0 False None None False None False 26145.0 0 3991136 154496 None code189 Supply and delivery at site wrought middle steel (galvanized) GI elbow confirming to IS 1239-II, 1991 with latest amendments if any for: For 40 mm dia GI elbow Each 216.3 216.3 2.0 False None None False None False 432.6 0 3991137 154496 None code190 supply and laying of Submersible calbes PVC 1x3x2.50sq.m m 189.0 189.0 60.0 False None None False None False 11340.0 0 3991138 154496 None code191 Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well caps, cable clips and water tight gland cable protectors, bolts, nuts, valve and gauges,tools and equipments etc., involved in the job as per specifications, with necessary tests as per specifications, with testing of as per instructions of engineer incharge of work. Job 6825.0 6825.0 1.0 False None None False None False 6825.0 0 3991139 154496 None code192 Providing Main connection from poll PVC insulated sheathed steel/wire cable 3.5x10 including cost of all materials with all lead and lifts loading and unloading charges, cost of labour, HOM charges of all machineries incidental and equipment charges and implementation of environmental and social safeguards etc complete and as per the direction of engineer in charge of work. m 60.9 60.9 70.0 False None None False None False 4263.0 0 3991140 154496 None code193 Labour charges for erection of indoor type panel board and meter board units with all necessary materials and labour tools and equipments including cement concrete for foundation/bed etc,complete as per specification, with testing of as per instructions of engineer incharge of work. Each 1417.5 1417.5 1.0 False None None False None False 1417.5 0 3991141 154496 None code194 Earthing: Providing and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit. The pits should be filled up with equal proportion of salt and charcoal 150mm around the pipe to complete depth. The connection from the pipe to the conduits etc. is to established through GI wire of sizes as per clause 7.3.3 of IS 732 using 12mm bolts, nuts, washers and check nuts, the pipe shall have 16 through holes of 12mm dia. Job 3937.5 3937.5 1.0 False None None False None False 3937.5 0 3991142 154496 None code 195 Supply and erection of 14 Feet Height Street Light Pole 14 Feet Height Street Light Pole on suitable cement concrete foundation with 2.5 Feet height dia 95 mm cast iron decorative round pedestal as per design weighing not less than 37Kgs, the pedestal shall be fitted with Class 'C' G.I.Pipe 7 Feet height 75 mm outer dia and 7 feet height top piece outer dia of 65 mm fixed by measure of threading/welding/coupling complete. (excluding foundation) Each 20600.0 20600.0 1.0 False None None False None False 20600.0 0 3991143 154496 None code 196 Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, maximum light intensity should be between 60 degrees to 70 degrees. CCT 5500K, IP66 optical and electrical compartment & impact resistance of complete luminaire IK08. Power Factor 0.9 with mains, Surge Protection Min 5KV along with Over voltage/ Overload, short circuit/ miss wiring protection. Compatible for pole mounting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light withsingle screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with .W System Power consumption. LED Efficiency1301m/w, nominal CRI 75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency Design & Development facility certified by ISO 90012008. Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/ Lumileds/Osram make LED Source LED Streetlight 25W Each 2425.0 2425.0 1.0 False None None False None False 2425.0 0 3991144 154496 None code 197 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 50 mm nominal dia Pipes m 757.05 757.05 30.0 False None None False None False 22711.5 0 1726146128000 0 None None Buildings Electrical 554081.2 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3991145 154497 None code1 PART A Supply and erection of PSC Pole 9.0m Long 200Kg WL Errection of RCC/PSC Poles 9 to 10M Long but in a pit of 1.8M depth No 6067.82 6067.82 5.0 False None None False None False 30339.1 0 3991146 154497 None code2 excavation in Ordinary Soil No 629.0 629.0 5.0 False None None False None False 3145.0 0 3991147 154497 None code3 Supply and erection ofRCC Pole9.0M Long 145kg WL Errection of RCC/PSC Poles 9 to 10M Long but in a pit of 1.8M depth No 9462.68 9462.68 3.0 False None None False None False 28388.04 0 3991148 154497 None code4 excavation in Ordinary Soil No 629.0 629.0 3.0 False None None False None False 1887.0 0 3991149 154497 None code5 Supply and fixing 11KV Horizontal cross arm with Fixing of VShape/Horizontal Cross arm including single top support Braces and insulators fixing No 1019.28 1019.28 5.0 False None None False None False 5096.4 0 3991150 154497 None code6 Supply and fixing 11KV Horizontal cross arm with Fixing of VShape/Horizontal Cross arm including single top support Braces and insulators fixing No 1015.74 1015.74 4.0 False None None False None False 4062.96 0 3991151 154497 None code7 Supply and fixing Guy with complete set Fixing of Guy Sets with break insulators making use of 7/3.15mm (7/10 SWG) galvanised steel wire with turn buckle and anchoring arrangement as per approved drawing Set 266.0 266.0 1.0 False None None False None False 266.0 0 3991152 154497 None code8 excavation in Ordinary Soil Set 327.0 327.0 1.0 False None None False None False 327.0 0 3991153 154497 None code9 Supply of 28300811KV 5KN No 241.9 241.9 6.0 False None None False None False 1451.4 0 3991154 154497 None code10 Supply of Silcon rubber composite insula No 219.48 219.48 18.0 False None None False None False 3950.64 0 3991155 154497 None code11 supply and fixing of Rabbit ACSR Conductor For rabbit ACSR m 73.42 73.42 1000.0 False None None False None False 73420.0 0 3991156 154497 None code12 PART B Supply and erection of 9M RCC DP Transformer stct Erection of pole upto 63kVA with 9Ms. RCC pole No 42958.72 42958.72 1.0 False None None False None False 42958.72 0 3991157 154497 None code13 excavation in Ordinary Soil No 629.0 629.0 2.0 False None None False None False 1258.0 0 3991158 154497 None code14 Supply of SWG G.I. Wire Kg 88.54 88.54 5.0 False None None False None False 442.7 0 3991159 154497 None code15 Supply of SWG Guy wire Kg 91.13 91.13 10.0 False None None False None False 911.3 0 3991160 154497 None code16 Supply and fixing Guy with complete set Fixing of Guy Sets with break insulators making use of 7/3.15mm (7/10 SWG) galvanised steel wire with turn buckle and anchoring arrangement as per approved drawing Set 1646.6 1646.6 4.0 False None None False None False 6586.4 0 3991161 154497 None code17 excavation in Ordinary Soil Set 327.0 327.0 4.0 False None None False None False 1308.0 0 3991162 154497 None code18 Supply of Earthing Materials type for grounding Ordinary Soil No 2488.0 2488.0 3.0 False None None False None False 7464.0 0 3991163 154497 None code19 Providing GI Pipe Earting for lighting arresters Transformer Neutral and Transformer metal parts (Excluding digging of pits) No 190.0 190.0 3.0 False None None False None False 570.0 0 3991164 154497 None code20 Supply of 11 kVA 5KN No 241.9 241.9 3.0 False None None False None False 725.7 0 3991165 154497 None code21 Supply of Silcon rubber composite insula No 219.48 219.48 3.0 False None None False None False 658.44 0 3991166 154497 None code22 supply and fixing of LT Spacer for TC Wiring No 49.56 49.56 4.0 False None None False None False 198.24 0 3991167 154497 None code23 Supply and wiring of95sq.mm (P.G. clamps rabbit) Wiringof one circuit of LT wiring Kit for 25/63/100KVA DTC to the existing LT protection kit / Distribution boxvia metering box No 402.45 402.45 4.0 False None None False None False 1609.8 0 3991168 154497 None code24 supply and fixing of LT Protection kit Fixing of LT Protection Kit No 2743.14 2743.14 2.0 False None None False None False 5486.28 0 3991169 154497 None code 25 supply and fixing of 11KV D.O.L.O. cutouts convent fixing 11KV D.O.L.O. cutouts/ Horn GapFuses including fixing of cross arms and wiring Set 7169.5 7169.5 1.0 False None None False None False 7169.5 0 3991170 154497 None code 26 supply and fixing of L.A. 9kV 5KA Metal Oxide Fixing of 3 no lighting arrestors including wiring. No 1908.78 1908.78 3.0 False None None False None False 5726.34 0 3991171 154497 None code27 supply and fixing of 11KV GOS 200A single break Fixing of GOS incuding wiring 11kV SB200A Set 12255.0 12255.0 1.0 False None None False None False 12255.0 0 3991172 154497 None code 28 supply and fixing of 63kVA aluminum wdg BEE4 sta Erectionof 25063kVA Transformer on Transformer structure No 206193.0 206193.0 1.0 False None None False None False 206193.0 0 3991173 154497 None code 29 supply and fixing of LT Electronic TriVector met LT Electroic TriVector Meter 5A class0.5/1.0 Accuracy No 4194.0 4194.0 1.0 False None None False None False 4194.0 0 3991174 154497 None code30 supply and fixing of with CT Ratio 100/5for50/63 LT Metering box for housing ETV meter with CT m 8075.74 8075.74 1.0 False None None False None False 8075.74 0 3991175 154497 None code31 Supply of AL lead wire 95sq.mm m 111.29 111.29 40.0 False None None False None False 4451.6 0 3991176 154497 None code32 PART C supply and fixing of PSC Pole8.0m Long 200Kg WL Ordinary soil No 4867.82 4867.82 1.0 False None None False None False 4867.82 0 3991177 154497 None code33 Same as above but Errection of RCC/PSC Poles 7.5 to 8M Long but in a pit of 1.5M depth No 922.0 922.0 1.0 False None None False None False 922.0 0 3991178 154497 None code34 supply and fixing of RCC Pole8.0M Long 115kg WL Ordinary soil No 6555.22 6555.22 1.0 False None None False None False 6555.22 0 3991179 154497 None code35 Same as above but Errection of RCC/PSC Poles 7.5 to 8M Long but in a pit of 1.5M depth No 922.0 922.0 1.0 False None None False None False 922.0 0 3991180 154497 None code36 supply and fixing of 4 Pin cross arm with pole clamp Fixing of 4 pin cross arm with insulator andbraces No 659.14 659.14 1.0 False None None False None False 659.14 0 3991181 154497 None code37 supply and fixing of 4 Pin cross arm with pole clamp Fixing of 4 pin cross arm with insulator andbraces No 655.6 655.6 2.0 False None None False None False 1311.2 0 3991182 154497 None code38 supply and fixing of Guy with complete set Fixing of Guy Sets with break insulators making use of 7/3.15mm 7/10 SWG galvanised steel wire with turn buckle and anchoring arrangement as per approved drawing Set 1646.6 1646.6 2.0 False None None False None False 3293.2 0 3991183 154497 None code39 excavation in Ordinary Soil Set 327.0 327.0 2.0 False None None False None False 654.0 0 3991184 154497 None code40 supply of 1.1 kV pin insulator Shell on No 36.58 36.58 8.0 False None None False None False 292.64 0 3991185 154497 None code41 supply of 1.1kV pininsulator G.I. pin No 41.3 41.3 8.0 False None None False None False 330.4 0 3991186 154497 None code42 supply of No.8 Strain Inslator No 31.86 31.86 8.0 False None None False None False 254.88 0 3991187 154497 None code43 supply and fixing of Weasel ACSR Conductor Strining of conductor wrensquirrelweaset binding of conductor on each insulator and dead endingon strain or disc/strain insulator by means of clamps m 44.88 44.88 480.0 False None None False None False 21542.4 0 3991188 154497 None code44 Deposit 20KW Each 37800.0 37800.0 1.0 False None None False None False 37800.0 0 3991189 154497 None code45 Electrical inspected charges Each 4100.0 4100.0 1.0 False None None False None False 4100.0 0
generalCriterionList	createdTs version createdDate modifiedDate criterionType description tenderEligibilityCriterionDocumentList 1726146130000 0 None None ELIGIBILITY Tenders from Joint ventures are not acceptable. None 1726146130000 0 None None ELIGIBILITY Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka None 1726146130000 0 None None ELIGIBILITY Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document. None 1726146130000 0 None None ELIGIBILITY It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission. None 1726146130000 0 None None ELIGIBILITY EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection. None
preQualCriterionList	None
technicalCriterionList	createdTs version createdDate modifiedDate description criterionCategoryText criterionTypeOthersValue tenderTechnicalCriterionDocumentList None None None None Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs) None None None None None None Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender) None None None None None None Work done certificate for satisfactorily completed as prime contractor, at least one similar work comprising of Building costing Rs. 33.79 lakhs from competent authorities not below the rank of Executive Engineer or equivalent list of such works in FORMAT-2 Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None Certificate issued by the competent authority not below the rank of Executive Engineer for having executed in any one year,for a continuous period of 12 months the following minimum quantities of work To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e 2019-20. 2020-21, 2021-22,2022-23 & 2023-24 executed in any one year, the following minimum quantities of work RCC/PCC 85.69 cum Steel- 5.36 MT SSM/BBM 63.59 cum Plastering 768.00 sqm flooring 641.82 sqm Past Experience None createdTs version createdDate modifiedDate documentName None None None None Others -- Information in the prescribed format and certificate from the competent authority. None None None None Copy of Registration for having registered in PWD Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None PWD Registration Certificate (Class I/II/III/IV) None None None None Liquid Assets and or availability of credit facilities of no less than Rs. 20.27 Lakhs Credit Lines/letter of credit/ certificates from the banks for meeting the fund requirement etc Financial Status None createdTs version createdDate modifiedDate documentName None None None None Line of Credit None None None None To qualify for award of this contract, each Tenderer in his name should have in the last five years i.e.2019-20. 2020-21, 2021-22,2022-23 & 2023-24 a achieved in at least two financial years an average annual financial turnover in all classes of civil engineering construction works only usually not less than the estimated annual payments under this contract of Rs.67.58 Lakhs Financial Status None createdTs version createdDate modifiedDate documentName None None None None Audited CA Certificate of Annual Turnover None None None None The information on litigation in which the Tenderer is involved are to be furnished. Others LITIGATION createdTs version createdDate modifiedDate documentName None None None None Others -- The information on litigation in which the Tenderer is involved are to be furnished. None None None None Name, address, and telephone, telex, and fax numbers of the tenderers bankers who may provide references if contacted by the employer. Others Name, address, and telephone, telex, and fax numbers of the tenderers bankers who may provide references if contacted by the employer. createdTs version createdDate modifiedDate documentName None None None None Others -- Name, address, and telephone, telex, and fax numbers of the tenderers bankers who may provide references if contacted by the employer. None None None None The information of the works for which tenderer has already submitted tender are to be furnished. Others TENDERED WORKS createdTs version createdDate modifiedDate documentName None None None None Others -- The information of the works for which tenderer has already submitted tender are to be furnished. None None None None The works for which tender acceptance letters are received are to be furnished Others TENDERED WORKS createdTs version createdDate modifiedDate documentName None None None None Others -- The works for which tender acceptance letters are received are to be furnished None None None None Existing commitments and ongoing works which are yet to be completed Others NEW WORKS createdTs version createdDate modifiedDate documentName None None None None Others -- Existing commitments and ongoing works which are yet to be completed None None None None Information on Existing commitments and on going works which are yet to be completed Others COMMITTED WORKS createdTs version createdDate modifiedDate documentName None None None None Others -- Information on Existing commitments and on going works which are yet to be completed None None None None Tenderers who meet the above specified minimum qualifying criteria will only be qualified if their available tender capacity is more than the total tender value The available tender capacity will be calculated as under Assessed available tender capacity AXNX2.5-BwhereA is Maximum value of civil engineering works executed in any one year during the last five yearsupdated to price level taking into account the completed as well as works in progressN is Number of years prescribed for completion of the works for which Tenders are invitedB is Value at price level of existing commitments and on-going works to be completed during the next years period of completion of the works for which Tenders are invited Others financial status createdTs version createdDate modifiedDate documentName None None None None Others -- Information in the prescribed format None None None None A site engineer having B.E Civil with minimum experience of 5 years in construction or Diploma in Civil Engineering with minimum experience of 8 years in construction. Others Technical status createdTs version createdDate modifiedDate documentName None None None None Others -- Information in the prescribed format and certificate from the competent authority.
tenderCriterionDocumentList	documentName optional documentTypeText Valid PWD Registration certificate True Technical Bid To qualify for award of this contract, each Tenderer in his name should have in the last five years i.e.2019-20. 2020-21, 2021-22,2022-23 & 2023-24 a achieved in at least two financial years an average annual financial turnover in all classes of civil engineering construction works only usually not less than the estimated annual payments under this contract of Rs.67.58 Lakhs True Technical Bid To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e 2019-20. 2020-21, 2021-22,2022-23 & 2023-24 executed in any one year, the following minimum quantities of work RCC/PCC 85.69 cum Steel- 5.36 MT SSM/BBM 63.59 cum Plastering 768.00 sqm flooring 641.82 sqm True Technical Bid Work done certificate for satisfactorily completed as prime contractor, at least one similar work comprising of Building costing Rs. 33.79 lakhs from competent authorities not below the rank of Executive Engineer or equivalent list of such works in FORMAT-2 True Technical Bid Liquid Assets and or availability of credit facilities of no less than Rs. 20.27 Lakhs Credit Lines/letter of credit/ certificates from the banks for meeting the fund requirement etc True Technical Bid A site engineer having B.E Civil with minimum experience of 5 years in construction or Diploma in Civil Engineering with minimum experience of 8 years in construction. True Technical Bid Tenderers who meet the above specified minimum qualifying criteria will only be qualified if their available tender capacity is more than the total tender value The available tender capacity will be calculated as under Assessed available tender capacity AXNX2.5-B True Technical Bid Information on Existing commitments and on going works which are yet to be completed True Technical Bid Existing commitments and ongoing works which are yet to be completed True Technical Bid The works for which tender acceptance letters are received are to be furnished True Technical Bid The information of the works for which tenderer has already submitted tender are to be furnished. True Technical Bid The information on litigation in which the Tenderer is involved are to be furnished. True Technical Bid Name, address, and telephone, telex, and fax numbers of the tenderers bankers who may provide references if contacted by the employer. True Technical Bid
tenderWorkLocationList
tenderAddress	None
tenderRecallDTO	None