createdTs	None
version	None
createdDate	None
modifiedDate	None
noticeInvitingTenderDTO	createdTs 1726570819369 version 4 createdDate None modifiedDate None tenderType RFQ evaluationType TWO_COVER evaluationTypeText Two Cover invitingStrategy OPEN invitingStrategyText Open taxType INCLUSIVE_TAX tenderFee 5000.00 emd 665000.00 bidValueType ITEM_WISE bidValueTypeText Item wise tenderReceiptClose 19-10-2024 16:00:00 tenderQueryClose 07-10-2024 16:00:00 technicalBidOpen 21-10-2024 16:00:00 publishedDate 17-09-2024 18:29:55 publishedByPost KHB_EE2_CO_BNG publishedByUser KPE11678 - LOKESHBABU C G bidValidityPeriod 180 noOfCalls 1 preBidMeetingDate 08-10-2024 11:00:00 preBidMeetingYn True preQualificationBidOpen None denominationType RUPEES denominationTypeText Rupees retenderedYn None percentageRateTypeText None contactPerson Lokesh Babu C G splitEmdRequiredYn False emdBankGuarantee None emdCash None bgValidityPeriod None hideWeightage None multipleCurrencySelectionAllowedYn False isTechWeightageAllowed False highestBidderSelection False isVariableEmdAllowed None qcbsTenderYn None itemwiseEmdRequiredYn None sampleSubmissionDate None officeNumber 08022273511 mobileNumber 8022273511 tenderSupplierList None
tenderSchedule	createdTs 1726570819387 version 6 createdDate None modifiedDate None tenderNumber KHB/2024-25/BD/WORK_INDENT283 title Construction of class rooms, library, laboratory, toilet and other allied works for Government First Grade College at M G road Chikkaballapura in Chikkaballapura District under SCP/TSP 2023-24 scheme description Construction of class rooms, library, laboratory, toilet and other allied works for Government First Grade College at M G road Chikkaballapura in Chikkaballapura District under SCP/TSP 2023-24 scheme category WORKS categoryText Works ecv 44263029.99 deptName Karnataka Housing Board status PUBLISHED statusText Published remarks None csrValue None ecvtenderYn False location 5488 locationName KHB Central Office Bengaluru provisionalAmount 44263030.0 groupOverheadTotal None fileNumber 199/2024-25
tenderSubEstimateList	createdTs version createdDate modifiedDate workCategoryName subEstimateName estimateTotal itemList 1726570819000 0 None None Buildings Construction of class rooms, library, laboratory, toilet and other allied works for Government First Grade College at M G road Chikkaballapura in Chikkaballapura District under 2023-24 scheme 44263029.99 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 4015711 155569 None code01 Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material to the appropriate disposal area as per direction of Engineer-in-charge Asbestos cement sheet Sqm 52.53 52.53 513.0 False None None False None False 26947.89 0 4015712 155569 None code02 Demolishing brick work manually/ by mechanical means including stack ing of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge. In cement mortar Sqm 1059.87 1059.87 116.73 False None None False None False 123718.6251 0 4015713 155569 None code03 Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, including removal and disposal of top organic soil not exceeding 150 mm in thickness.By Mechanical Means using Dozer.A In area of light jungle ha 404.79 404.79 4.84 False None None False None False 1959.1836 0 4015714 155569 None code04 Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work. In all kinds of soils upto 300 mm depth Cum 97.85 97.85 146.9008 False None None False None False 14374.24328 0 4015715 155569 None code05 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In all kinds of soils Depth upto 3 m Cum 105.06 105.06 1143.22 False None None False None False 120106.6932 0 4015716 155569 None code06 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In ordinary/soft rock without blasting upto 1.5 m depth Cum 373.89 373.89 209.95 False None None False None False 78498.2055 0 4015717 155569 None code07 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In ordinary/soft rock without blasting 1.5 to 3 m depth Cum 437.75 437.75 83.98 False None None False None False 36762.245 0 4015718 155569 None code08 Loading and Unloading of Stone Boulder/Stone aggregates/ Sand/Kankar/Moorum. (Disposal of 10Km) Cum 122.57 122.57 343.93 False None None False None False 42155.5001 0 4015719 155569 None code09 Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 l/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications. Sqm 121.54 121.54 513.0 False None None False None False 62350.02 0 4015720 155569 None code10 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. Cum 273.98 273.98 1135.1 False None None False None False 310994.698 0 4015721 155569 None code11 Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work. Cum 488.22 488.22 262.0 False None None False None False 127913.64 0 4015722 155569 None code12 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, formwork , cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (Rate including Formwork, Centering & Scaffolding and The cost of steel reinforcement shall be paid separately) Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates Cum 6168.67 6168.67 105.26 False None None False None False 649314.2042 0 4015723 155569 None code13 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (Rate including Formwork, Centering & Scaffolding and The cost of steel reinforcement shall be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates FOOTINGS Cum 7048.17 7048.17 221.18 False None None False None False 1558914.2406 0 4015724 155569 None code14 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (Rate including Formwork, Centering & Scaffolding and The cost of steel reinforcement shall be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Lift Well Cum 7178.69 7178.69 9.0 False None None False None False 64608.21 0 4015725 155569 None code15 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (Rate including Formwork, Centering & Scaffolding and The cost of steel reinforcement shall be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates PEDESTALS Cum 7178.69 7178.69 7.73 False None None False None False 55491.2737 0 4015726 155569 None code16 Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (Rate including Formwork, Centering & Scaffolding and The cost of steel reinforcement shall be paid separately) Plinth Beam Cum 10011.6 10011.6 36.7 False None None False None False 367425.72 0 4015727 155569 None code17 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (Rate including Formwork, Centering & Scaffolding and The cost of steel reinforcement shall be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates COLUMNS Cum 11351.73 11351.73 25.34 False None None False None False 287652.8382 0 4015728 155569 None code18 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (Rate including Formwork, Centering & Scaffolding and The cost of steel reinforcement shall be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates PLINTH Cum 10016.24 10016.24 13.29 False None None False None False 133115.8296 0 4015729 155569 None code19 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (Rate including Formwork, Centering & Scaffolding and The cost of steel reinforcement shall be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Lift Wall Cum 7345.24 7345.24 9.0 False None None False None False 66107.16 0 4015730 155569 None code20 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (Rate including Formwork, Centering & Scaffolding and The cost of steel reinforcement shall be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates RCC BEAMS Cum 10683.98 10683.98 42.64 False None None False None False 455564.9072 0 4015731 155569 None code21 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (Rate including Formwork, Centering & Scaffolding and The cost of steel reinforcement shall be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates RCC SLAB Cum 10016.24 10016.24 67.05 False None None False None False 671588.892 0 4015732 155569 None code22 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (Rate including Formwork, Centering & Scaffolding and The cost of steel reinforcement shall be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates LINTELS Cum 10683.98 10683.98 5.03 False None None False None False 53740.4194 0 4015733 155569 None code23 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (Rate including Formwork, Centering & Scaffolding and The cost of steel reinforcement shall be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates RCC STAIRCASE Cum 9682.36 9682.36 6.25 False None None False None False 60514.75 0 4015734 155569 None code24 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (Rate including Formwork, Centering & Scaffolding and The cost of steel reinforcement shall be paid separately) Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates Cum 9285.09 9285.09 5.95 False None None False None False 55246.2855 0 4015735 155569 None code25 Providing and inserting nipples with approved fixing compound after drilling holes for grouting as per Technical Specifications including subsequent cutting/removal and sealing of the hole as necessary of nipples after completion of grouting with Cement/Epoxy No 210.12 210.12 20.0 False None None False None False 4202.4 0 4015736 155569 None code26 Providing Lath plaster with cement mortar 1:3 5cm thick with 6mm dia mild steel bars at 20cms. C to c both horizontally and vertically fixing chicken mesh for drop chejjas, facia, backing to cup board including cost of all materials, labour, providing and removing form work HOM of machineries, curing, complete as per specification. Sqm 1275.14 1275.14 8.49 False None None False None False 10825.9386 0 4015737 155569 None code27 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, traightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Tonne 92140.71 92140.71 40.51 False None None False None False 3732620.1621 0 4015738 155569 None code28 Extra for providing throating or drip moulding to RCC chejjas with plastering ( labour charges only ) as per specifications. Specification No . KBS m 33.0 33.0 98.2 False None None False None False 3240.6 0 4015739 155569 None code29 Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 6580.67 6580.67 72.57 False None None False None False 477559.2219 0 4015740 155569 None code30 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. Sqm 1349.3 1349.3 530.64 False None None False None False 715992.552 0 4015741 155569 None code31 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. Sqm 1137.12 1137.12 117.27 False None None False None False 133350.0624 0 4015742 155569 None code32 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. Cum 101779.45 101779.45 1.15 False None None False None False 117046.3675 0 4015743 155569 None code33 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. No 1046.48 1046.48 15.0 False None None False None False 15697.2 0 4015744 155569 None code34 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. No 1083.56 1083.56 15.0 False None None False None False 16253.4 0 4015745 155569 None code35 Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. complete. No 1019.7 1019.7 15.0 False None None False None False 15295.5 0 4015746 155569 None code36 Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete No 244.11 244.11 30.0 False None None False None False 7323.3 0 4015747 155569 None code37 Providing and fixing aluminium tower bolts, ISI marked, anodised (an- odic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete No 133.9 133.9 30.0 False None None False None False 4017.0 0 4015748 155569 None code38 Providing and fixing PTMT door catcher of length 72 mm and dia. of 42 mm with suitable washers weighing not less than 33 gms No 56.65 56.65 15.0 False None None False None False 849.75 0 4015749 155569 None code39 Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : : 125x85x5.5 mm (heavy type) No 283.25 283.25 30.0 False None None False None False 8497.5 0 4015750 155569 None code40 Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Fastener with threaded dia 12 mm No 61.8 61.8 90.0 False None None False None False 5562.0 0 4015751 155569 None code41 Supplying and fixing new Honne wood beads wherever necessary including cost of materials, labour, complete as per specifications. m 42.0 42.0 106.8 False None None False None False 4485.6 0 4015752 155569 None code42 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification. -do- 35 mm thick both side commercial Sqm 3421.66 3421.66 41.76 False None None False None False 142888.5216 0 4015753 155569 None code43 Providing & fixing of 2.5 track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 94mm width x 45mm height with reinforcement of 1mm thickness and Sash with overall size of 39mm x 58mm with GI reinforcement of 1.5mm and mesh sash of size 25mm x 42mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 5mm plain float glass, standard hardware& single point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 1819mm x 1819mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) Sqm 6747.53 6747.53 47.25 False None None False None False 318820.7925 0 4015754 155569 None code44 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) Sqm 5890.57 5890.57 2.16 False None None False None False 12723.6312 0 4015755 155569 None code45 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding Kg 173.04 173.04 1037.61 False None None False None False 179548.0344 0 4015756 155569 None code46 Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long brackets of 15x15mm M.S Square tube, the entire door frame to be reinforced with 19x19mm M.S Square tube of 19 gauge. The door frame to be fixed to the wall using M.S. Screws of 65/80mm size complete as per manufacturers specification & direction of Engineer-in-charge. m 327.54 327.54 11.8 False None None False None False 3864.972 0 4015757 155569 None code47 Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Prelaminated PVC C Channel of 5mm thick sheet & 30x50mm wide to form stiles & 5mm thick & 75mm wide Prelaminated PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet Prelaminated on either side fitted in the M.S. frame, Sealed to the stiles & rails with PVC Designer beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75mm Aluminium hinges.- with one side prelam Sqm 2101.2 2101.2 5.28 False None None False None False 11094.336 0 4015758 155569 None code48 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. No 1147.42 1147.42 17.0 False None None False None False 19506.14 0 4015759 155569 None code49 Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge... (Inside) Sqm 321.36 321.36 542.22 False None None False None False 174247.8192 0 4015760 155569 None code50 Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 217.33 217.33 473.0 False None None False None False 102797.09 0 4015761 155569 None code51 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. Sqm 103.0 103.0 1335.04 False None None False None False 137509.12 0 4015762 155569 None code52 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.. ( Outside) Sqm 359.47 359.47 466.34 False None None False None False 167635.2398 0 4015763 155569 None code53 Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge: 10mm to 15 mm wide and 8 mm deep groove. m 53.56 53.56 586.5 False None None False None False 31412.94 0 4015764 155569 None code54 Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. ( length of mesh only be measured for payment Plaster mesh 200mm wide m 44.0 44.0 1636.8 False None None False None False 72019.2 0 4015765 155569 None code55 Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 600x600 mm Sqm 1210.25 1210.25 192.99 False None None False None False 233566.1475 0 4015766 155569 None code56 Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : ** Flamed finish granite stone slab Black, Cherry Red, Brown, Cat Eye, River Pink or equivalent. Sqm 2539.98 2539.98 258.96 False None None False None False 657753.2208 0 4015767 155569 None code57 Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU wa terproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6 kg/m2 to achieve final DFT (Dry Film Thickness) of 1mm including prime coat of epoxy primer @150 g/m2 and protection with 120gsm Geo-textile over the wa terproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification. Sqm 841.51 841.51 39.6 False None None False None False 33323.796 0 4015768 155569 None code58 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/m2 including pointing the joints with white cement and matching pigment etc., complete. Sqm 915.67 915.67 39.6 False None None False None False 36260.532 0 4015769 155569 None code59 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. Sqm 1492.47 1492.47 33.6 False None None False None False 50146.992 0 4015770 155569 None code60 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 303.85 303.85 33.6 False None None False None False 10209.36 0 4015771 155569 None code61 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Kg 581.95 581.95 127.52 False None None False None False 74210.264 0 4015772 155569 None code62 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 130.81 130.81 1335.04 False None None False None False 174636.5824 0 4015773 155569 None code63 Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 litre/ 10 Sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 160.68 160.68 466.34 False None None False None False 74931.5112 0 4015774 155569 None code64 Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 51.5 51.5 49.41 False None None False None False 2544.615 0 4015775 155569 None code65 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 118.45 118.45 49.41 False None None False None False 5852.6145 0 4015776 155569 None code66 Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 54.59 54.59 100.22 False None None False None False 5471.0098 0 4015777 155569 None code67 Polishing on wood work with ready mixed wax polish of approved brand and manufacture : New work to give an even surface including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 139.05 139.05 100.22 False None None False None False 13935.591 0 4015778 155569 None code68 Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Kg 116.39 116.39 1083.0 False None None False None False 126050.37 0 4015779 155569 None code69 Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer including cost of materials ,labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge Sqm 8524.28 8524.28 28.8 False None None False None False 245499.264 0 4015780 155569 None code70 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (Rate including Formwork, Centering & Scaffolding and The cost of steel reinforcement shall be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates COLUMNS First Floor Cum 11465.25 11465.25 17.88 False None None False None False 204998.67 0 4015781 155569 None code71 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (Rate including Formwork, Centering & Scaffolding and The cost of steel reinforcement shall be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates First floorRCC BEAMS Cum 10790.82 10790.82 42.64 False None None False None False 460120.5648 0 4015782 155569 None code72 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (Rate including Formwork, Centering & Scaffolding and The cost of steel reinforcement shall be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates First floor RCC SLAB Cum 10116.4 10116.4 80.75 False None None False None False 816899.3 0 4015783 155569 None code73 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (Rate including Formwork, Centering & Scaffolding and The cost of steel reinforcement shall be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates First floor LINTELS Cum 10790.82 10790.82 5.63 False None None False None False 60752.3166 0 4015784 155569 None code74 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (Rate including Formwork, Centering & Scaffolding and The cost of steel reinforcement shall be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates First floor RCC STAIRCASE Cum 9779.18 9779.18 6.25 False None None False None False 61119.875 0 4015785 155569 None code75 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (Rate including Formwork, Centering & Scaffolding and The cost of steel reinforcement shall be paid separately) Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates First Floor Cum 9377.94 9377.94 6.35 False None None False None False 59549.919 0 4015786 155569 None code76 Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, curing complete as per specifications. First Floor Cum 2098.29 2098.29 2.7 False None None False None False 5665.383 0 4015787 155569 None code77 Providing and inserting nipples with approved fixing compound after drilling holes for grouting as per Technical Specifications including subsequent cutting/removal and sealing of the hole as necessary of nipples after completion of grouting with Cement/Epoxy First Floor No 212.22 212.22 20.0 False None None False None False 4244.4 0 4015788 155569 None code78 Providing Lath plaster with cement mortar 1:3 5cm thick with 6mm dia mild steel bars at 20cms. C to c both horizontally and vertically fixing chicken mesh for drop chejjas, facia, backing to cup board including cost of all materials, labour, providing and removing form work HOM of machineries, curing, complete as per specification. First Floor Sqm 1287.89 1287.89 8.49 False None None False None False 10934.1861 0 4015789 155569 None code79 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, traightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. First Floor Tonne 93062.12 93062.12 20.02 False None None False None False 1863103.6424 0 4015790 155569 None code80 Extra for providing throating or drip moulding to RCC chejjas with plastering ( labour charges only ) as per specifications. Specification No . KBS First Floor m 33.33 33.33 98.2 False None None False None False 3273.006 0 4015791 155569 None code81 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. First Floor Sqm 1362.79 1362.79 602.64 False None None False None False 821271.7656 0 4015792 155569 None code82 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. First Floor Sqm 1148.49 1148.49 48.87 False None None False None False 56126.7063 0 4015793 155569 None code83 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. First Floor Cum 102797.24 102797.24 1.15 False None None False None False 118216.826 0 4015794 155569 None code84 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. First Floor No 1056.94 1056.94 15.0 False None None False None False 15854.1 0 4015795 155569 None code85 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. First Floor No 1094.4 1094.4 15.0 False None None False None False 16416.0 0 4015796 155569 None code86 Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. complete. First Floor No 1029.9 1029.9 15.0 False None None False None False 15448.5 0 4015797 155569 None code87 Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete First Floor No 246.55 246.55 30.0 False None None False None False 7396.5 0 4015798 155569 None code88 Providing and fixing aluminium tower bolts, ISI marked, anodised (an- odic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete First Floor No 135.24 135.24 30.0 False None None False None False 4057.2 0 4015799 155569 None code89 Providing and fixing PTMT door catcher of length 72 mm and dia. of 42 mm with suitable washers weighing not less than 33 gms First Floor No 57.22 57.22 15.0 False None None False None False 858.3 0 4015800 155569 None code90 Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : : 125x85x5.5 mm (heavy type) First Floor No 286.08 286.08 30.0 False None None False None False 8582.4 0 4015801 155569 None code91 Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Fastener with threaded dia 12 mm First Floor No 62.42 62.42 90.0 False None None False None False 5617.8 0 4015802 155569 None code92 Supplying and fixing new Honne wood beads wherever necessary including cost of materials, labour, complete as per specifications. First Floor m 42.42 42.42 106.8 False None None False None False 4530.456 0 4015803 155569 None code93 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification. -do- 35 mm thick both side commercial First Floor Sqm 3455.88 3455.88 41.76 False None None False None False 144317.5488 0 4015804 155569 None code94 Providing & fixing of 2.5 track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 94mm width x 45mm height with reinforcement of 1mm thickness and Sash with overall size of 39mm x 58mm with GI reinforcement of 1.5mm and mesh sash of size 25mm x 42mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 5mm plain float glass, standard hardware& single point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 1819mm x 1819mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) Sqm 6815.01 6815.01 47.25 False None None False None False 322009.2225 0 4015805 155569 None code95 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) First Floor Sqm 5949.48 5949.48 2.16 False None None False None False 12850.8768 0 4015806 155569 None code96 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding First Floor Kg 174.77 174.77 1037.61 False None None False None False 181343.0997 0 4015807 155569 None code97 Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long brackets of 15x15mm M.S Square tube, the entire door frame to be reinforced with 19x19mm M.S Square tube of 19 gauge. The door frame to be fixed to the wall using M.S. Screws of 65/80mm size complete as per manufacturers specification & direction of Engineer-in-charge. First Floor m 330.82 330.82 11.8 False None None False None False 3903.676 0 4015808 155569 None code98 Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Prelaminated PVC C Channel of 5mm thick sheet & 30x50mm wide to form stiles & 5mm thick & 75mm wide Prelaminated PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet Prelaminated on either side fitted in the M.S. frame, Sealed to the stiles & rails with PVC Designer beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75mm Aluminium hinges.- with one side prelam First Floor Sqm 2122.21 2122.21 5.28 False None None False None False 11205.2688 0 4015809 155569 None code99 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. First Floor No 1158.89 1158.89 17.0 False None None False None False 19701.13 0 4015810 155569 None code100 Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (Inside) First Floor Sqm 324.57 324.57 454.82 False None None False None False 147620.9274 0 4015811 155569 None code101 Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 219.5 219.5 564.3 False None None False None False 123863.85 0 4015812 155569 None code102 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. First Floor Sqm 104.03 104.03 1338.93 False None None False None False 139288.8879 0 4015813 155569 None code103 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.. ( Outside) First Floor Sqm 363.06 363.06 792.11 False None None False None False 287583.4566 0 4015814 155569 None code104 Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge: 10mm to 15 mm wide and 8 mm deep groove. First Floor m 54.1 54.1 874.76 False None None False None False 47324.516 0 4015815 155569 None code105 Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. ( length of mesh only be measured for payment Plaster mesh 200mm wide First Floor m 44.44 44.44 1395.6 False None None False None False 62020.464 0 4015816 155569 None code106 Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 600x600 mm First Floor Sqm 1222.35 1222.35 146.36 False None None False None False 178903.146 0 4015817 155569 None code107 Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : ** Flamed finish granite stone slab Black, Cherry Red, Brown, Cat Eye, River Pink or equivalent. First Floor Sqm 2565.38 2565.38 152.88 False None None False None False 392195.2944 0 4015818 155569 None code108 Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU wa terproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6 kg/m2 to achieve final DFT (Dry Film Thickness) of 1mm including prime coat of epoxy primer @150 g/m2 and protection with 120gsm Geo-textile over the wa terproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification. First Floor Sqm 849.93 849.93 37.2 False None None False None False 31617.396 0 4015819 155569 None code109 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/m2 including pointing the joints with white cement and matching pigment etc., complete. First Floor Sqm 924.83 924.83 37.2 False None None False None False 34403.676 0 4015820 155569 None code110 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. First Floor Sqm 1507.39 1507.39 33.6 False None None False None False 50648.304 0 4015821 155569 None code111 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. First Floor Sqm 306.89 306.89 33.6 False None None False None False 10311.504 0 4015822 155569 None code112 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. First Floor Kg 587.77 587.77 127.52 False None None False None False 74952.4304 0 4015823 155569 None code113 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. First Floor Sqm 132.12 132.12 1338.93 False None None False None False 176899.4316 0 4015824 155569 None code114 Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 litre/ 10 Sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. First Floor Sqm 162.29 162.29 792.11 False None None False None False 128551.5319 0 4015825 155569 None code115 Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. First Floor Sqm 52.02 52.02 49.41 False None None False None False 2570.3082 0 4015826 155569 None code116 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. First Floor Sqm 119.63 119.63 49.41 False None None False None False 5910.9183 0 4015827 155569 None code117 Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. First Floor Sqm 55.14 55.14 100.22 False None None False None False 5526.1308 0 4015828 155569 None code118 Polishing on wood work with ready mixed wax polish of approved brand and manufacture : New work to give an even surface including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. First Floor Sqm 140.44 140.44 100.22 False None None False None False 14074.8968 0 4015829 155569 None code119 Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. First Floor Kg 116.39 116.39 1083.0 False None None False None False 126050.37 0 4015830 155569 None code120 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (Rate including Formwork, Centering & Scaffolding and The cost of steel reinforcement shall be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates COLUMNS SECOND FLOOR Cum 11578.77 11578.77 17.88 False None None False None False 207028.4076 0 4015831 155569 None code121 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (Rate including Formwork, Centering & Scaffolding and The cost of steel reinforcement shall be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Second floor RCC BEAMS Cum 10897.66 10897.66 42.64 False None None False None False 464676.2224 0 4015832 155569 None code122 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (Rate including Formwork, Centering & Scaffolding and The cost of steel reinforcement shall be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Second floor RCC SLAB Cum 10216.56 10216.56 80.75 False None None False None False 824987.22 0 4015833 155569 None code123 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (Rate including Formwork, Centering & Scaffolding and The cost of steel reinforcement shall be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Second floor LINTELS Cum 10897.66 10897.66 5.63 False None None False None False 61353.8258 0 4015834 155569 None code124 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (Rate including Formwork, Centering & Scaffolding and The cost of steel reinforcement shall be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Second floor RCC STAIRCASE Cum 9876.01 9876.01 6.25 False None None False None False 61725.0625 0 4015835 155569 None code125 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (Rate including Formwork, Centering & Scaffolding and The cost of steel reinforcement shall be paid separately) Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates Second floor Cum 9470.79 9470.79 6.35 False None None False None False 60139.5165 0 4015836 155569 None code126 Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, curing complete as per specifications. Second floor Cum 2098.29 2098.29 2.7 False None None False None False 5665.383 0 4015837 155569 None code127 Providing and inserting nipples with approved fixing compound after drilling holes for grouting as per Technical Specifications including subsequent cutting/removal and sealing of the hole as necessary of nipples after completion of grouting with Cement/Epoxy Second floor No 214.32 214.32 20.0 False None None False None False 4286.4 0 4015838 155569 None code128 Providing Lath plaster with cement mortar 1:3 5cm thick with 6mm dia mild steel bars at 20cms. C to c both horizontally and vertically fixing chicken mesh for drop chejjas, facia, backing to cup board including cost of all materials, labour, providing and removing form work HOM of machineries, curing, complete as per specification. Second floor Sqm 1300.64 1300.64 8.49 False None None False None False 11042.4336 0 4015839 155569 None code129 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, traightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Second floor Tonne 93983.52 93983.52 19.85 False None None False None False 1865572.872 0 4015840 155569 None code130 Extra for providing throating or drip moulding to RCC chejjas with plastering ( labour charges only ) as per specifications. Specification No . KBS Second floor m 33.66 33.66 98.2 False None None False None False 3305.412 0 4015841 155569 None code131 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. Second floor Sqm 1376.29 1376.29 602.64 False None None False None False 829407.4056 0 4015842 155569 None code132 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. Second floor Sqm 1159.86 1159.86 48.87 False None None False None False 56682.3582 0 4015843 155569 None code133 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. Second floor Cum 103815.04 103815.04 1.15 False None None False None False 119387.296 0 4015844 155569 None code134 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. Second floor No 1067.41 1067.41 15.0 False None None False None False 16011.15 0 4015845 155569 None code135 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. Second floor No 1105.23 1105.23 15.0 False None None False None False 16578.45 0 4015846 155569 None code136 Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. complete. Second floor No 1040.09 1040.09 15.0 False None None False None False 15601.35 0 4015847 155569 None code137 Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete Second floor No 248.99 248.99 30.0 False None None False None False 7469.7 0 4015848 155569 None code138 Providing and fixing aluminium tower bolts, ISI marked, anodised (an- odic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete Second floor No 136.58 136.58 30.0 False None None False None False 4097.4 0 4015849 155569 None code139 Providing and fixing PTMT door catcher of length 72 mm and dia. of 42 mm with suitable washers weighing not less than 33 gms Second floor No 57.78 57.78 15.0 False None None False None False 866.7 0 4015850 155569 None code140 Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : : 125x85x5.5 mm (heavy type) Second floor No 288.92 288.92 30.0 False None None False None False 8667.6 0 4015851 155569 None code141 Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Fastener with threaded dia 12 mm Second floor No 63.04 63.04 90.0 False None None False None False 5673.6 0 4015852 155569 None code142 Supplying and fixing new Honne wood beads wherever necessary including cost of materials, labour, complete as per specifications. Second floor m 42.84 42.84 106.8 False None None False None False 4575.312 0 4015853 155569 None code143 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification. -do- 35 mm thick both side commercial Second floor Sqm 3490.09 3490.09 41.76 False None None False None False 145746.1584 0 4015854 155569 None code144 Providing & fixing of 2.5 track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 94mm width x 45mm height with reinforcement of 1mm thickness and Sash with overall size of 39mm x 58mm with GI reinforcement of 1.5mm and mesh sash of size 25mm x 42mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 5mm plain float glass, standard hardware& single point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 1819mm x 1819mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) Sqm 6882.48 6882.48 47.25 False None None False None False 325197.18 0 4015855 155569 None code145 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) Second floor Sqm 6008.38 6008.38 2.16 False None None False None False 12978.1008 0 4015856 155569 None code146 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding Second floor Kg 176.5 176.5 1037.61 False None None False None False 183138.165 0 4015857 155569 None code147 Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long brackets of 15x15mm M.S Square tube, the entire door frame to be reinforced with 19x19mm M.S Square tube of 19 gauge. The door frame to be fixed to the wall using M.S. Screws of 65/80mm size complete as per manufacturers specification & direction of Engineer-in-charge. Second floor m 334.09 334.09 11.8 False None None False None False 3942.262 0 4015858 155569 None code148 Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Prelaminated PVC C Channel of 5mm thick sheet & 30x50mm wide to form stiles & 5mm thick & 75mm wide Prelaminated PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet Prelaminated on either side fitted in the M.S. frame, Sealed to the stiles & rails with PVC Designer beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75mm Aluminium hinges.- with one side prelam Second floor Sqm 2143.22 2143.22 5.28 False None None False None False 11316.2016 0 4015859 155569 None code149 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. Second floor No 1170.37 1170.37 17.0 False None None False None False 19896.29 0 4015860 155569 None code150 Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge... (Inside) Second floor Sqm 327.79 327.79 470.66 False None None False None False 154277.6414 0 4015861 155569 None code151 Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 221.68 221.68 564.3 False None None False None False 125094.024 0 4015862 155569 None code152 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. Second floor Sqm 105.06 105.06 1354.77 False None None False None False 142332.1362 0 4015863 155569 None code153 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.. ( Outside) Second floor Sqm 366.66 366.66 547.94 False None None False None False 200907.6804 0 4015864 155569 None code154 Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge: 10mm to 15 mm wide and 8 mm deep groove. Second floor m 54.63 54.63 586.5 False None None False None False 32040.495 0 4015865 155569 None code155 Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. ( length of mesh only be measured for payment Plaster mesh 200mm wide Second floor m 44.88 44.88 1395.6 False None None False None False 62634.528 0 4015866 155569 None code156 Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 600x600 mm Second floor Sqm 1234.46 1234.46 249.91 False None None False None False 308503.8986 0 4015867 155569 None code157 Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : ** Flamed finish granite stone slab Black, Cherry Red, Brown, Cat Eye, River Pink or equivalent. Second floor Sqm 2590.78 2590.78 152.88 False None None False None False 396078.4464 0 4015868 155569 None code158 Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU wa terproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6 kg/m2 to achieve final DFT (Dry Film Thickness) of 1mm including prime coat of epoxy primer @150 g/m2 and protection with 120gsm Geo-textile over the wa terproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification. Second floor Sqm 858.34 858.34 37.2 False None None False None False 31930.248 0 4015869 155569 None code159 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/m2 including pointing the joints with white cement and matching pigment etc., complete. Second floor Sqm 933.98 933.98 37.2 False None None False None False 34744.056 0 4015870 155569 None code160 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. Second floor Sqm 1522.32 1522.32 33.6 False None None False None False 51149.952 0 4015871 155569 None code161 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Second floor Sqm 309.93 309.93 33.6 False None None False None False 10413.648 0 4015872 155569 None code162 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Second floor Kg 593.59 593.59 127.52 False None None False None False 75694.5968 0 4015873 155569 None code163 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Second floor Sqm 133.43 133.43 1354.77 False None None False None False 180766.9611 0 4015874 155569 None code164 Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 litre/ 10 Sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Second floor Sqm 163.89 163.89 547.94 False None None False None False 89801.8866 0 4015875 155569 None code165 Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Second floor Sqm 52.53 52.53 49.41 False None None False None False 2595.5073 0 4015876 155569 None code166 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Second floor Sqm 120.82 120.82 49.41 False None None False None False 5969.7162 0 4015877 155569 None code167 Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Second floor Sqm 55.68 55.68 100.22 False None None False None False 5580.2496 0 4015878 155569 None code168 Polishing on wood work with ready mixed wax polish of approved brand and manufacture : New work to give an even surface including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Second floor Sqm 141.83 141.83 100.22 False None None False None False 14214.2026 0 4015879 155569 None code169 Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Second floor Kg 118.72 118.72 1083.0 False None None False None False 128573.76 0 4015880 155569 None code170 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (Rate including Formwork, Centering & Scaffolding and The cost of steel reinforcement shall be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates COLUMNS Cum 11692.28 11692.28 17.88 False None None False None False 209057.9664 0 4015881 155569 None code171 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (Rate including Formwork, Centering & Scaffolding and The cost of steel reinforcement shall be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates RCC BEAMS Cum 11004.5 11004.5 42.64 False None None False None False 469231.88 0 4015882 155569 None code172 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (Rate including Formwork, Centering & Scaffolding and The cost of steel reinforcement shall be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates RCC SLAB Cum 10316.72 10316.72 84.65 False None None False None False 873310.348 0 4015883 155569 None code173 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (Rate including Formwork, Centering & Scaffolding and The cost of steel reinforcement shall be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates LINTELS Cum 11004.5 11004.5 6.23 False None None False None False 68558.035 0 4015884 155569 None code174 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (Rate including Formwork, Centering & Scaffolding and The cost of steel reinforcement shall be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates RCC STAIRCASE Cum 9972.83 9972.83 6.25 False None None False None False 62330.1875 0 4015885 155569 None code175 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (Rate including Formwork, Centering & Scaffolding and The cost of steel reinforcement shall be paid separately) Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates Cum 9563.64 9563.64 6.75 False None None False None False 64554.57 0 4015886 155569 None code176 Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, curing complete as per specifications. Cum 2098.29 2098.29 2.7 False None None False None False 5665.383 0 4015887 155569 None code177 Providing and inserting nipples with approved fixing compound after drilling holes for grouting as per Technical Specifications including subsequent cutting/removal and sealing of the hole as necessary of nipples after completion of grouting with Cement/Epoxy No 216.42 216.42 20.0 False None None False None False 4328.4 0 4015888 155569 None code178 Providing Lath plaster with cement mortar 1:3 5cm thick with 6mm dia mild steel bars at 20cms. C to c both horizontally and vertically fixing chicken mesh for drop chejjas, facia, backing to cup board including cost of all materials, labour, providing and removing form work HOM of machineries, curing, complete as per specification. Sqm 1313.39 1313.39 8.49 False None None False None False 11150.6811 0 4015889 155569 None code179 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, traightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Tonne 94904.93 94904.93 20.1 False None None False None False 1907589.093 0 4015890 155569 None code180 KSRB 4-2.12 : Extra for providing throating or drip moulding to RCC chejjas with plastering ( labour charges only ) as per specifications. Specification No . KBS m 33.99 33.99 98.2 False None None False None False 3337.818 0 4015891 155569 None code181 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. Sqm 1389.78 1389.78 843.44 False None None False None False 1172196.0432 0 4015892 155569 None code182 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. Sqm 1171.23 1171.23 48.87 False None None False None False 57238.0101 0 4015893 155569 None code183 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. Cum 104832.83 104832.83 1.15 False None None False None False 120557.7545 0 4015894 155569 None code184 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. No 1077.87 1077.87 15.0 False None None False None False 16168.05 0 4015895 155569 None code185 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. No 1116.07 1116.07 15.0 False None None False None False 16741.05 0 4015896 155569 None code186 Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. complete. No 1050.29 1050.29 15.0 False None None False None False 15754.35 0 4015897 155569 None code187 Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete No 251.43 251.43 30.0 False None None False None False 7542.9 0 4015898 155569 None code188 Providing and fixing aluminium tower bolts, ISI marked, anodised (an- odic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete No 137.92 137.92 30.0 False None None False None False 4137.6 0 4015899 155569 None code189 Providing and fixing PTMT door catcher of length 72 mm and dia. of 42 mm with suitable washers weighing not less than 33 gms No 58.35 58.35 15.0 False None None False None False 875.25 0 4015900 155569 None code190 Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : : 125x85x5.5 mm (heavy type) No 291.75 291.75 30.0 False None None False None False 8752.5 0 4015901 155569 None code191 Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Fastener with threaded dia 12 mm No 63.65 63.65 90.0 False None None False None False 5728.5 0 4015902 155569 None code192 Supplying and fixing new Honne wood beads wherever necessary including cost of materials, labour, complete as per specifications. m 43.26 43.26 106.8 False None None False None False 4620.168 0 4015903 155569 None code193 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification. -do- 35 mm thick both side commercial Sqm 3524.31 3524.31 41.76 False None None False None False 147175.1856 0 4015904 155569 None code194 Providing & fixing of 2.5 track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 94mm width x 45mm height with reinforcement of 1mm thickness and Sash with overall size of 39mm x 58mm with GI reinforcement of 1.5mm and mesh sash of size 25mm x 42mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 5mm plain float glass, standard hardware& single point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 1819mm x 1819mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) Sqm 6949.96 6949.96 47.25 False None None False None False 328385.61 0 4015905 155569 None code195 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) Sqm 6067.29 6067.29 2.16 False None None False None False 13105.3464 0 4015906 155569 None code196 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding Kg 178.23 178.23 1037.61 False None None False None False 184933.2303 0 4015907 155569 None code197 Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long brackets of 15x15mm M.S Square tube, the entire door frame to be reinforced with 19x19mm M.S Square tube of 19 gauge. The door frame to be fixed to the wall using M.S. Screws of 65/80mm size complete as per manufacturers specification & direction of Engineer-in-charge. m 337.37 337.37 11.8 False None None False None False 3980.966 0 4015908 155569 None code198 Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Prelaminated PVC C Channel of 5mm thick sheet & 30x50mm wide to form stiles & 5mm thick & 75mm wide Prelaminated PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet Prelaminated on either side fitted in the M.S. frame, Sealed to the stiles & rails with PVC Designer beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75mm Aluminium hinges.- with one side prelam Sqm 2164.24 2164.24 5.28 False None None False None False 11427.1872 0 4015909 155569 None code199 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. No 1181.84 1181.84 17.0 False None None False None False 20091.28 0 4015910 155569 None code200 Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge... (Inside) Sqm 331.0 331.0 470.66 False None None False None False 155788.46 0 4015911 155569 None code201 Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 223.85 223.85 564.3 False None None False None False 126318.555 0 4015912 155569 None code202 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. Sqm 106.09 106.09 1354.77 False None None False None False 143727.5493 0 4015913 155569 None code203 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.. ( Outside) Sqm 370.25 370.25 547.94 False None None False None False 202874.785 0 4015914 155569 None code204 Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge: 10mm to 15 mm wide and 8 mm deep groove. m 55.17 55.17 586.5 False None None False None False 32357.205 0 4015915 155569 None code205 Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. ( length of mesh only be measured for payment Plaster mesh 200mm wide m 45.32 45.32 1395.6 False None None False None False 63248.592 0 4015916 155569 None code206 Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 600x600 mm Sqm 1246.56 1246.56 249.91 False None None False None False 311527.8096 0 4015917 155569 None code207 Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : ** Flamed finish granite stone slab Black, Cherry Red, Brown, Cat Eye, River Pink or equivalent. Sqm 2616.18 2616.18 152.88 False None None False None False 399961.5984 0 4015918 155569 None code208 Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU wa terproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6 kg/m2 to achieve final DFT (Dry Film Thickness) of 1mm including prime coat of epoxy primer @150 g/m2 and protection with 120gsm Geo-textile over the wa terproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification. Sqm 866.76 866.76 37.2 False None None False None False 32243.472 0 4015919 155569 None code209 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/m2 including pointing the joints with white cement and matching pigment etc., complete. Sqm 943.14 943.14 37.2 False None None False None False 35084.808 0 4015920 155569 None code210 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. Sqm 1537.24 1537.24 33.6 False None None False None False 51651.264 0 4015921 155569 None code211 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 312.97 312.97 33.6 False None None False None False 10515.792 0 4015922 155569 None code212 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Kg 599.41 599.41 127.52 False None None False None False 76436.7632 0 4015923 155569 None code213 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 134.73 134.73 1354.77 False None None False None False 182528.1621 0 4015924 155569 None code214 Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 litre/ 10 Sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 165.5 165.5 547.94 False None None False None False 90684.07 0 4015925 155569 None code215 Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 53.05 53.05 49.41 False None None False None False 2621.2005 0 4015926 155569 None code216 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 122.0 122.0 49.41 False None None False None False 6028.02 0 4015927 155569 None code217 Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 56.23 56.23 100.22 False None None False None False 5635.3706 0 4015928 155569 None code218 Polishing on wood work with ready mixed wax polish of approved brand and manufacture : New work to give an even surface including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 143.22 143.22 100.22 False None None False None False 14353.5084 0 4015929 155569 None code219 Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Kg 144.28 144.28 690.0 False None None False None False 99553.2 0 4015930 155569 None code220 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 g/m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 m or as desired by Engineer in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required Kg 602.59 602.59 22.2 False None None False None False 13377.498 0 4015931 155569 None code221 Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Kg 119.88 119.88 1083.0 False None None False None False 129830.04 0 4015932 155569 None code222 Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU wa terproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6 kg/m2 to achieve final DFT (Dry Film Thickness) of 1mm including prime coat of epoxy primer @150 g/m2 and protection with 120gsm Geo-textile over the wa terproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification. Sqm 866.76 866.76 457.2 False None None False None False 396282.672 0 4015933 155569 None code223 Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, including removal and disposal of top organic soil not exceeding 150 mm in thickness.By Mechanical Means using Dozer.A In area of light jungle ha 404.79 404.79 0.14 False None None False None False 56.6706 0 4015934 155569 None code224 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In all kinds of soils Depth upto 3 m Cum 105.06 105.06 28.34 False None None False None False 2977.4004 0 4015935 155569 None code225 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In ordinary/soft rock without blasting upto 1.5 m depth Cum 373.89 373.89 2.05 False None None False None False 766.4745 0 4015936 155569 None code226 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In ordinary/soft rock without blasting 1.5 to 3 m depth Cum 437.75 437.75 1.1 False None None False None False 481.525 0 4015937 155569 None code227 Loading and Unloading of Stone Boulder/Stone aggregates/ Sand/Kankar/Moorum. (Disposal of 10Km) Cum 122.57 122.57 50.0 False None None False None False 6128.5 0 4015938 155569 None code228 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. Cum 210.12 210.12 7.94 False None None False None False 1668.3528 0 4015939 155569 None code229 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (Rate including Formwork, Centering & Scaffolding and The cost of steel reinforcement shall be paid separately) Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates Cum 5720.62 5720.62 1.02 False None None False None False 5835.0324 0 4015940 155569 None code230 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (Rate including Formwork, Centering & Scaffolding and The cost of steel reinforcement shall be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates A. Raft Cum 6651.04 6651.04 2.05 False None None False None False 13634.632 0 4015941 155569 None code231 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (Rate including Formwork, Centering & Scaffolding and The cost of steel reinforcement shall be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates sump tank-walls Cum 10469.23 10469.23 5.52 False None None False None False 57790.1496 0 4015942 155569 None code232 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (Rate including Formwork, Centering & Scaffolding and The cost of steel reinforcement shall be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cover slab Cum 9237.56 9237.56 2.05 False None None False None False 18936.998 0 4015943 155569 None code233 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, traightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Tonne 92140.71 92140.71 1.13 False None None False None False 104119.0023 0 4015944 155569 None code234 Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU wa terproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6 kg/m2 to achieve final DFT (Dry Film Thickness) of 1mm including prime coat of epoxy primer @150 g/m2 and protection with 120gsm Geo-textile over the wa terproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification. Sqm 841.51 841.51 27.14 False None None False None False 22838.5814 0 4015945 155569 None code235 Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 307.97 307.97 27.14 False None None False None False 8358.3058 0 4015946 155569 None code236 Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.. Sqm 282.22 282.22 5.52 False None None False None False 1557.8544 0 4015947 155569 None code237 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 92.7 92.7 21.62 False None None False None False 2004.174 0 4015948 155569 None code238 C. I Manhole covers with frame 610 * 455mm size (38kgs) No 2118.64 2118.64 2.0 False None None False None False 4237.28 0 4015949 155569 None code239 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. In all kinds of soils Depth upto 3 m Cum 105.06 105.06 69.19 False None None False None False 7269.1014 0 4015950 155569 None code240 Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5 m. Including cost of all labour complete as per specifications Cum 164.8 164.8 69.19 False None None False None False 11402.512 0 4015951 155569 None code241 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 Using 40 mm nominal size graded rushed coarse aggregates Cum 6168.67 6168.67 1.23 False None None False None False 7587.4641 0 4015952 155569 None code242 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20 mm nominal dia pipes m 390.37 390.37 380.0 False None None False None False 148340.6 0 4015953 155569 None code243 Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 100 mm nominal dia Pipes m 957.9 957.9 387.0 False None None False None False 370707.3 0 4015954 155569 None code244 Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 150 mm nominal dia Pipes m 1636.67 1636.67 111.0 False None None False None False 181670.37 0 4015955 155569 None code245 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid Each 6156.31 6156.31 28.0 False None None False None False 172376.68 0 4015956 155569 None code246 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required One urinal basin with 5 litre white P.V.C.Automatic flushing cistern Each 4587.62 4587.62 15.0 False None None False None False 68814.3 0 4015957 155569 None code247 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White itreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar tap Each 3174.46 3174.46 32.0 False None None False None False 101582.72 0 4015958 155569 None code248 Providing and fixing unplasticised PVC connection pipe with brass unions 20 mm nominal bore m 93.73 93.73 48.0 False None None False None False 4499.04 0 4015959 155569 None code249 Providing and fixing 100 mm sand cast Iron grating for gully trap. Each 48.41 48.41 80.0 False None None False None False 3872.8 0 4015960 155569 None code250 Providing and fixing brass bib cock of approved quality : 15 mm nominal bore Each 215.27 215.27 40.0 False None None False None False 8610.8 0 4015961 155569 None code251 Providing and fixing brass stop cock of approved quality 15 mm nominal bore Each 307.97 307.97 23.0 False None None False None False 7083.31 0 4015962 155569 None code252 Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) : 25 mm nominal bore Each 565.47 565.47 25.0 False None None False None False 14136.75 0 4015963 155569 None code253 Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) : 32 mm nominal bore Each 615.94 615.94 20.0 False None None False None False 12318.8 0 4015964 155569 None code254 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc 20 mm nominal dia pipe m 390.37 390.37 800.0 False None None False None False 312296.0 0 4015965 155569 None code255 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc 25 mm nominal dia pipe m 491.31 491.31 400.0 False None None False None False 196524.0 0 4015966 155569 None code256 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc 32 mm nominal dia pipe m 573.71 573.71 275.0 False None None False None False 157770.25 0 4015967 155569 None code257 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 40 mm nominal dia Pipes m 491.31 491.31 207.0 False None None False None False 101701.17 0 4015968 155569 None code258 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 50 mm nominal dia Pipes m 742.63 742.63 520.0 False None None False None False 386167.6 0 4015969 155569 None code259 Providing and constructing "WIRE CUT BRICK MACHINEHOLE CHAMBERS" using Portland/Pozzolana cement, conical in shape at top, with CC 1:3:6 foundation using 40mm and down size graded metal of approved quality and with an offset of 0.15M alround the chamber. 12.4 Construct Brick masonry in CM 1:4, 340 mm thick, with wirecut bricks of approved quality, plaster inside and out side with CM 1:3, 12mm thick, except for the conical surface outside where the plaster thickness shall be 20mm. Slope inside to be 1:6 in the concrete towards central drain and finished smooth. Fixing of pipes in CC 1:2:4 with graded metal of 20mm and down size. Providing and fixing SFRC Machinehole frame and cover (Heavy Duty) conforming to IS:12592 with latest amendment, in CC 1:2:4.Providing and fixing footsteps made of 12mm dia. steel bars (Fe-500) with 3mm thick plastic encapsulation (IS-10910). The footsteps shall be fixed 30cms apart and on CC block embeded to masonry wall. The whole works include watering, curing, barricading, danger lighting, pouring tar over MH frame and cover, cost of tar, shoring, strutting, de-watering, engraving Machinehole number with flow direction on the inner conical surface etc. as per the drawing etc. as per technical specifications and for the following diameters and depth etc. for 1.2mm Constructing Brick Masonry ircular Machinehole 1.2 m internal dia. ,1.0 M depth & SFRC cover & frame No 29918.41 29918.41 2.0 False None None False None False 59836.82 0 4015970 155569 None code260 Providing and constructing "WIRE CUT BRICK MACHINEHOLE CHAMBERS" using Portland/Pozzolana cement, conical in shape at top, with CC 1:3:6 foundation using 40mm and down size graded metal of approved quality and with an offset of 0.15M alround the chamber. 12.4 Construct Brick masonry in CM 1:4, 340 mm thick, with wirecut bricks of approved quality, plaster inside and out side with CM 1:3, 12mm thick, except for the conical surface outside where the plaster thickness shall be 20mm. Slope inside to be 1:6 in the concrete towards central drain and finished smooth. Fixing of pipes in CC 1:2:4 with graded metal of 20mm and down size. Providing and fixing SFRC Machinehole frame and cover (Heavy Duty) conforming to IS:12592 with latest amendment, in CC 1:2:4. Providing and fixing footsteps made of 12mm dia. steel bars (Fe-500) with 3mm thick plastic encapsulation (IS-10910). The footsteps shall be fixed 30cms apart and on CC block embeded to masonry wall. The whole works include watering, curing, barricading, danger lighting, pouring tar over MH frame and cover, cost of tar, shoring, strutting, de-watering, engraving Machinehole number with flow direction on the inner conical surface etc. as per the drawing etc. as per technical specifications and for the following diameters and depth etc. for 1.2mm Constructing Brick MasonryCircular Machinehole 1.2 m internal dia. , 1.1 M depth & SFRC cover & frame No 30416.93 30416.93 2.0 False None None False None False 60833.86 0 4015971 155569 None code261 Providing and constructing "WIRE CUT BRICK MACHINEHOLE CHAMBERS" using Portland/Pozzolana cement, conical in shape at top, with CC 1:3:6 foundation using 40mm and down size graded metal of approved quality and with an offset of 0.15M alround the chamber. 12.4 Construct Brick masonry in CM 1:4, 340 mm thick, with wirecut bricks of approved quality, plaster inside and out side with CM 1:3, 12mm thick, except for the conical surface outside where the plaster thickness shall be 20mm. Slope inside to be 1:6 in the concrete towards central drain and finished smooth. Fixing of pipes in CC 1:2:4 with graded metal of 20mm and down size. Providing and fixing SFRC Machinehole frame and cover(Heavy Duty) conforming to IS:12592 with latest amendment, in CC 1:2:4. Providing and fixing footsteps made of 12mm dia. steel bars (Fe-500) with 3mm thick plastic encapsulation (IS-10910). The footsteps shall be fixed 30cms apart and on CC block embeded to masonry wall. The whole works include watering, curing, barricading, danger lighting, pouring tar over MH frame and cover, cost of tar, shoring, strutting, de-watering, engraving Machinehole number with flow direction on the inner conical surface etc. as per the drawing etc. as per technical specifications and for the following diameters and depth etc. for 1.2mm Constructing Brick Masonry ircular Machinehole 1.5 m internal dia. & 1.0 M depth includ. SFRC F& No 40830.23 40830.23 2.0 False None None False None False 81660.46 0 4015972 155569 None code262 Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc complete as per standard design: Inside dimensions 455x610 mm and 45 cm deep for single pipe line : With common burnt clay (non modular) bricks of class designation 3.5 No 5811.26 5811.26 24.0 False None None False None False 139470.24 0 4015973 155569 None code263 Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 500X700 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: Inside dimensions 500x700 mm and 45 cm deep for pipe line with one or two inlets :With common burnt clay (non modular) bricks of class designation 3.5 No 6466.34 6466.34 16.0 False None None False None False 103461.44 0 4015974 155569 None code264 Providing and fixing gun metal non- return valve of approved quality (screwed end) 32 mm nominal bore Horizontal No 833.27 833.27 1.0 False None None False None False 833.27 0 4015975 155569 None code265 Providing and fixing PVC (S.W.R) Gully Trap 10cms x 10cms with all fitting arrangements & all necessary accessories complete No 356.38 356.38 3.0 False None None False None False 1069.14 0 4015976 155569 None code266 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. No 9.27 9.27 8000.0 False None None False None False 74160.0 0 4015977 155569 None code267 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. In all kinds of soils Depth upto 3 m Cum 105.06 105.06 24.0 False None None False None False 2521.44 0 4015978 155569 None code268 Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. Cum 1052.1 1052.1 8.0 False None None False None False 8416.8 0 4015979 155569 None code269 Supplying, filling, spreading &leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer in-charge Cum 1245.3 1245.3 8.0 False None None False None False 9962.4 0 4015980 155569 None code270 Supplying, filling, spreading &leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -in-charge Cum 1251.6 1251.6 8.0 False None None False None False 10012.8 0 4015981 155569 None code271 Providing and fixing factory made precast RCC perforated drain covers, having concrete of strength not less than M-25, of size 1000 x 450x50 mm, reinforced with 8 mm dia four nos longitudinal & 9 nos cross sectional T.M.T. hoop bars, including providing 50 mm dia perforations @ 100 to 125 mm c/c, including providing edge binding with M.S. flats of size 50 mm x 1.6 mm complete, all as per direction of Engineer-in-charge No 1179.15 1179.15 6.0 False None None False None False 7074.9 0 4015982 155569 None code272 Providing 4kg Fire Extinguisher Mono Ammonium Phosphate Powder 50, Stored Pressure Type, Pressure Gauge, Gross Weight 6.9 Kg, empty weight 2.9 Kg, Can Height 440MM, Diameter 140MM, Discharge Time less than 13 Sees, Controllable discharge mechanism (Squeeze grip with easy snap safety seal), Range minimum 4 meters, applicable on Class A,8, C and electrically started Fire, A Rating 2A, 8 Rating 218, Can construction : Deep drawn & Co., Mig welded, valve Construciton : Forging and Mechining, Internal Coating of Can: Epoxy powder coating, External Coating of Can: Epoxy Polyster power coating, Sheet metal thickness: 1.60MM, 5 years Warranty with instalert system with Superior quality EPDM Rubber Hosepipe etc., including cost of materials, labour, usage charges of machinery complete as per specifications. complete IS 15683, CE Approved. Make- ANDEX/CEASEFIRE/MINIMAX - Page No 1, SI. No15.3 Part-III No 4931.64 4931.64 5.0 False None None False None False 24658.2 0 4015983 155569 None code273 Supply and installation in position, testing and commissioning 6kg Fir e Ex tinguisher Mono Ammonium Phos phate Powder 50, Stored Pressure Type, Pressure Gauge, Gross Weight 9.5 Kg, empty weight 3.5 Kg, Can Height 435MM, Diameter 160MM, Discharge Time less than 9 Sees, Controllable discharge mechanism (Squeeze grip with easy snap safety seal), Range minimum 4 meters, applicable on Class A,8,C and electrically started Fire, A Rating 3A, 8 Rating 218, Can construction : Deep drawn & Co., Mig welded, valve Construciton : Forging and Mechining, Internal Coating of Can: Epoxy powder coating, External Coating of Can: Epoxy PoIyster power coating, Sheet metal thickness: 1.60MM, 5 years Warranty with instalert system with Superior quality EPDM Rubber Hosepipe etc., including cost cost of supporting materials like MS stand & accessaries if it is fixing n floor / MS brackets & accessories if it is fixing on wall,,, labour, usage charges of machinery complete as per specificed.with regards to general guidelines of fire saf -Providing ABC Powder based MAP 50, 9Kg Page No 1, SI. No15.3 Part-III No 2935.5 2935.5 5.0 False None None False None False 14677.5 0 4015984 155569 None code274 Supply and installation of 9kg Fire Extinguisher Mono Ammonium Phosphate Powder 50, Stored Pressure Type, Pressure Gauge, Gross Weight 14.90 Kg, empty weight 5.90 Kg, Can Height 615MM, Diameter 175M M, Discharge Time less than 13Secs, Controllable discharge mechanism (Squeeze grip with easy snap safety seal), Range minimum 4 meters, applicable on Class A,8, C and electrically started Fire, A Rating 4A, 8 Rating 348, Can construction : Deep drawn & Co., Mig welded, valve Construciton : Forging and Mechining, Internal Coating of Can: Epoxy powder coating, External Coating of Can: Epoxy Polyster power coating, Sheet metal thickness: 2.00MM, 5 years Warrantywith instalert system with Superior quality EPDM Rubber Hosepipe etc.,including including cost of supporting materials like MS stand & accessriesif it is fixing n floor / MS brackets & accessories if it is fixing onwall,including cost of supporting materials like MS stand & accessariesif ited.with regards to general guidelines of fire safety rated doors,MRLL beams, pressure switch, manual change over for doors duringemergency, ARD of 10 times with sufficie Providing ABC Powder based AP 90, 2K Page No 1, SI. No15.3 Part-III No 3347.5 3347.5 5.0 False None None False None False 16737.5 0 4015985 155569 None code275 Water purification plants: Providing, Installation and Commissioning of automatic Water purification plant (RO+UF) with all accessories piping, product water tank on single phase power supply as per the enclosed detailed Technical Specifications including cost of material, loading and unloading and as directed by the Engineer in charge. (Ref- detailed specification enclosed seperatly). Note:- 1.The above rates mentioned are only for the preparation of estimate purpose. 2. All items are to be of BSI /NFS standards,with BSI / NFS mark . 3. Tenders to be invited for procurement. 4. No direct payment should be made under any situation or condition or on any account. 5. After commissioning of plant necessary testing to be done for the satisfactory of Engineer Incharge. Note : Refer the ANNEXURE : F for Detailed Specification of Each For 500 LPH SS : Skid type No 336810.0 336810.0 1.0 False None None False None False 336810.0 0 4015986 155569 None code276 Supplying and wiring adopting loop system in existing pvc conduit/casing caping using 1100v grade,COPPER conducter flexible multistrand FRLS PVC insulated,2x1.5Sq.mm Cable confirming to the GTP without switch,the other end of the wire shall be terminated with sufficient loose length in a wood/PVC round block complete for each outlet. 2.2.1)Short point upto 3Mtr from tapping point to out let via switch box No 269.0 269.0 13.0 False None None False None False 3497.0 0 4015987 155569 None code277 Supplying and wiring adopting loop system in existing pvc conduit/casing caping using 1100v grade,COPPER conducter flexible multistrand FRLS PVC insulated,2x1.5Sq.mm Cable confirming to the GTP without switch,the other end of the wire shall be terminated with sufficient loose length in a wood/PVC round block complete for each outlet. 2.2.2)Medium point above 3Mtr upto 6Mtr from tapping point to out let via switch box No 379.0 379.0 21.0 False None None False None False 7959.0 0 4015988 155569 None code278 Supplying and wiring adopting loop system in existing pvc conduit/casing caping using 1100v grade,COPPER conducter flexible multistrand FRLS PVC insulated,2x1.5Sq.mm Cable confirming to the GTP without switch,the other end of the wire shall be terminated with sufficient loose length in a wood/PVC round block complete for each outlet. 2.2.3)Long point above 6Mtr upto 10Mtr from tapping point to out let via switch box No 555.0 555.0 15.0 False None None False None False 8325.0 0 4015989 155569 None code279 Supplying and wiring adopting loop system in existing pvc conduit/casing caping using 1100v grade,COPPER conducter flexible multistrand FRLS PVC insulated,2x1.5Sq.mm Cable confirming to the GTP without switch,the other end of the wire shall be terminated with sufficient loose length in a wood/PVC round block complete for each outlet. 2.2.4)Two outlet in a row,above 3Mtr upto 6Mtr from tapping point to out let via switches No 677.0 677.0 75.0 False None None False None False 50775.0 0 4015990 155569 None code280 Supplying and wiring adopting loop system in existing pvc conduit/casing caping using 1100v grade,COPPER conducter flexible multistrand FRLS PVC insulated,2x1.5Sq.mm Cable confirming to the GTP without switch,the other end of the wire shall be terminated with sufficient loose length in a wood/PVC round block complete for each outlet. 2.2.5)Three outlet in a row, above 6Mts upto 10Mtr from tapping point to out let via switches box No 989.0 989.0 45.0 False None None False None False 44505.0 0 4015991 155569 None code281 Supplying and flush mounting powder coated metal box suitable for mounting modular switch plates.The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 3.4.1) 1-2Way Each 138.0 138.0 95.0 False None None False None False 13110.0 0 4015992 155569 None code282 Supplying and flush mounting powder coated metal box suitable for mounting modular switch plates.The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 3.4.2) 3Way Each 159.0 159.0 42.0 False None None False None False 6678.0 0 4015993 155569 None code283 Supplying and flush mounting powder coated metal box suitable for mounting modular switch plates.The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 3.4.3)4-5Way Each 177.0 177.0 20.0 False None None False None False 3540.0 0 4015994 155569 None code284 Supplying and flush mounting powder coated metal box suitable for mounting modular switch plates.The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 3.4.4)6 Way Each 220.0 220.0 14.0 False None None False None False 3080.0 0 4015995 155569 None code285 Supplying and flush mounting powder coated metal box suitable for mounting modular switch plates.The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 3.4.5)8Way Each 261.0 261.0 32.0 False None None False None False 8352.0 0 4015996 155569 None code286 Supplying and flush mounting powder coated metal box suitable for mounting modular switch plates.The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 3.4.6)10-12Way Each 319.0 319.0 21.0 False None None False None False 6699.0 0 4015997 155569 None code287 Supplying and flush mounting powder coated metal box suitable for mounting modular switch plates.The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 3.4.6)16Way Each 363.0 363.0 14.0 False None None False None False 5082.0 0 4015998 155569 None code288 Suppling and fixing PVC/metal conduit deep juction boxes 1.5.1)19/20mm deep juction box Each 49.0 49.0 175.0 False None None False None False 8575.0 0 4015999 155569 None code289 Suppling and fixing PVC/metal conduit deep juction boxes 1.5.2) 25mm deep juction box Each 56.0 56.0 195.0 False None None False None False 10920.0 0 4016000 155569 None code290 Suppling and fixing PVC/metal conduit deep juction boxes 1.5.3) 32mm deep juction box Each 61.0 61.0 20.0 False None None False None False 1220.0 0 4016001 155569 None code291 Suppling and fixing PVC/metal conduit deep juction boxes 1.13)Suplay and fixing Metal Fan Box with Round Hook Each 117.0 117.0 92.0 False None None False None False 10764.0 0 4016002 155569 None code292 Supplying and mounting 2 nos of 2 way 6amps flush type switches either surface /flush mounted on exisinting gang box or in 4mm thick plastic sheet and mounted on a flush mounted wooden box and wiring as required Each 170.0 170.0 6.0 False None None False None False 1020.0 0 4016003 155569 None code293 Supplying and fixing superior gality modular switch mounting polycorbonate plate with neceaary supporting back plate with rquired nos. of machine screwes, bolts nuts etc., complete on the existing metal/PVC box. 3.5.1) 1 to 2 Module Each 137.0 137.0 95.0 False None None False None False 13015.0 0 4016004 155569 None code294 Supplying and fixing superior gality modular switch mounting polycorbonate plate with neceaary supporting back plate with rquired nos. of machine screwes, bolts nuts etc., complete on the existing metal/PVC box. 3.5.1) 3 Module Each 161.0 161.0 42.0 False None None False None False 6762.0 0 4016005 155569 None code295 Supplying and fixing superior gality modular switch mounting polycorbonate plate with neceaary supporting back plate with rquired nos. of machine screwes, bolts nuts etc., complete on the existing metal/PVC box. 3.5.2) 4 Module Each 175.0 175.0 20.0 False None None False None False 3500.0 0 4016006 155569 None code296 Supplying and fixing superior gality modular switch mounting polycorbonate plate with neceaary supporting back plate with rquired nos. of machine screwes, bolts nuts etc., complete on the existing metal/PVC box. 3.5.3) 6 Module Each 234.0 234.0 14.0 False None None False None False 3276.0 0 4016007 155569 None code297 Supplying and fixing superior gality modular switch mounting polycorbonate plate with neceaary supporting back plate with rquired nos. of machine screwes, bolts nuts etc., complete on the existing metal/PVC box. 3.5.4) 8 Module Each 284.0 284.0 32.0 False None None False None False 9088.0 0 4016008 155569 None code298 Supplying and fixing superior gality modular switch mounting polycorbonate plate with neceaary supporting back plate with rquired nos. of machine screwes, bolts nuts etc., complete on the existing metal/PVC box. 3.4.6)10-12Way Each 344.0 344.0 21.0 False None None False None False 7224.0 0 4016009 155569 None code299 Supplying and fixing superior gality modular switch mounting polycorbonate plate with neceaary supporting back plate with rquired nos. of machine screwes, bolts nuts etc., complete on the existing metal/PVC box. 3.4.7)16Way Each 397.0 397.0 14.0 False None None False None False 5558.0 0 4016010 155569 None code300 Supplying and fixing of modular switch/Socket/stepped electeonic fan regulator/ dimmer/telephone socket etc on existing modular switch plate. 3.6.1) 6A mps one way Each 102.0 102.0 345.0 False None None False None False 35190.0 0 4016011 155569 None code301 Supplying and fixing of modular switch/Socket/stepped electeonic fan regulator/ dimmer/telephone socket etc on existing modular switch plate. 3.6.2) 6A mps Two way Each 166.0 166.0 12.0 False None None False None False 1992.0 0 4016012 155569 None code302 Supplying and fixing of modular switch/Socket/stepped electeonic fan regulator/ dimmer/telephone socket etc on existing modular switch plate. 3.6.3) 6A mps 3way socket. Each 162.0 162.0 75.0 False None None False None False 12150.0 0 4016013 155569 None code303 Supplying and fixing of modular switch/Socket/stepped electeonic fan regulator/ dimmer/telephone socket etc on existing modular switch plate. 3.6.4) Stepped fan regulator. Each 357.0 357.0 92.0 False None None False None False 32844.0 0 4016014 155569 None code304 Supplying and fixing of modular switch/Socket/stepped electeonic fan regulator/ dimmer/telephone socket etc on existing modular switch plate. 3.6.8) 16Amps one way switch Each 180.0 180.0 22.0 False None None False None False 3960.0 0 4016015 155569 None code305 Supplying and fixing of modular switch/Socket/stepped electeonic fan regulator/ dimmer/telephone socket etc on existing modular switch plate. 3.6.9) 32A DP Switch Each 326.0 326.0 10.0 False None None False None False 3260.0 0 4016016 155569 None code306 Supplying and fixing of modular switch/Socket/stepped electeonic fan regulator/ dimmer/telephone socket etc on existing modular switch plate. 3.6.11) 6/16Amps univeral socket Each 236.0 236.0 22.0 False None None False None False 5192.0 0 4016017 155569 None code307 Supplying and fixing of modular switch/Socket/stepped electeonic fan regulator/ dimmer/telephone socket etc on existing modular switch plate. 3.6.12) TV/Telephone socket Each 156.0 156.0 6.0 False None None False None False 936.0 0 4016018 155569 None code308 Supplying and fixing of bakelite DP/Socket/switch with/without neon indicator over excisting wood board or flush mounting in plastic /nitchesMOUNTING/telephone socket etc on existing modular switch plate. 3.7) 32Amps flush/projected type DP switch Each 646.0 646.0 6.0 False None None False None False 3876.0 0 4016019 155569 None code309 Concealed Conduit System: Supplying …. Mm dia 2mm2.5mm Thick heavy gauge PVC conduit pipe with suitable size bends, metal/PVC junction boxes adhesive paste etc… and running before concreting th eslab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be convered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary 1.2.1) 19/20mm dia 2mm thik m 66.0 66.0 1650.0 False None None False None False 108900.0 0 4016020 155569 None code310 Concealed Conduit System: Supplying …. Mm dia 2mm2.5mm Thick heavy gauge PVC conduit pipe with suitable size bends, metal/PVC junction boxes adhesive paste etc… and running before concreting th eslab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be convered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary 1.2.2) 25mm dia 2mm thik m 78.0 78.0 2800.0 False None None False None False 218400.0 0 4016021 155569 None code311 Concealed Conduit System: Supplying …. Mm dia 2mm2.5mm Thick heavy gauge PVC conduit pipe with suitable size bends, metal/PVC junction boxes adhesive paste etc… and running before concreting th eslab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be convered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary 1.2.3) 32mm dia 2.5mm thik m 103.0 103.0 550.0 False None None False None False 56650.0 0 4016022 155569 None code312 Groove cutting: Supplying …. Mm dia 2mm2.5mm Thick heavy gauge PVC conduit pipe with suitable size bends, metal/PVC junction boxes adhesive paste etc… by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering up to the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary. 1.3.1) 19/20mm dia 2mm thik m 68.0 68.0 550.0 False None None False None False 37400.0 0 4016023 155569 None code313 Groove cutting: Supplying …. Mm dia 2mm2.5mm Thick heavy gauge PVC conduit pipe with suitable size bends, metal/PVC junction boxes adhesive paste etc… by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering up to the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary. 1.3.2) 25mm dia 2mm thik m 79.0 79.0 750.0 False None None False None False 59250.0 0 4016024 155569 None code314 Groove cutting: Supplying …. Mm dia 2mm2.5mm Thick heavy gauge PVC conduit pipe with suitable size bends, metal/PVC junction boxes adhesive paste etc… by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering up to the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary. 1.3.3) 32mm dia 2.5mm thik m 99.0 99.0 150.0 False None None False None False 14850.0 0 4016025 155569 None code315 Wiring for lighting /power circuit using one of PVC insulated 1100v grade,multis and Copper conductor single core cable in open or consealed system of wiring. 2.3.2) 1.5 sqmm m 26.0 26.0 3350.0 False None None False None False 87100.0 0 4016026 155569 None code316 Wiring for lighting /power circuit using one of PVC insulated 1100v grade,multis and Copper conductor single core cable in open or consealed system of wiring. 2.3.3) 2.5 sqmm m 42.0 42.0 4250.0 False None None False None False 178500.0 0 4016027 155569 None code317 Wiring for lighting /power circuit using one of PVC insulated 1100v grade,multis and Copper conductor single core cable in open or consealed system of wiring. 2.3.4) 4 sqmm m 63.0 63.0 1250.0 False None None False None False 78750.0 0 4016028 155569 None code318 Wiring for lighting /power circuit using one of PVC insulated 1100v grade,multis and Copper conductor single core cable in open or consealed system of wiring. 2.3.5) 6 sqmm m 92.0 92.0 1450.0 False None None False None False 133400.0 0 4016029 155569 None code319 Supplying and fixing regular MCB distribution boards on wall/ woodboard /flush mounting required clamps,bolts,nuts etc.. with provision for fixing suitable type capacity MCB's single phase /3 phase /single door with powder coated painting etc., complete II. Double Door 5.19.8) 8Way SP & N Each 1854.0 1854.0 1.0 False None None False None False 1854.0 0 4016030 155569 None code320 Supplying and fixing regular MCB distribution boards on wall/ woodboard /flush mounting required clamps,bolts,nuts etc.. with provision for fixing suitable type capacity MCB's single phase /3 phase /single door with powder coated painting etc., complete II. Double Door 5.19.11)4 Way TP & N Each 4038.0 4038.0 2.0 False None None False None False 8076.0 0 4016031 155569 None code321 Supplying and fixing regular MCB distribution boards on wall/ woodboard /flush mounting required clamps,bolts,nuts etc.. with provision for fixing suitable type capacity MCB's single phase /3 phase /single door with powder coated painting etc., complete II. Double Door 5.19.12)6 Way TP & N Each 4940.0 4940.0 2.0 False None None False None False 9880.0 0 4016032 155569 None code322 Supplying and fixing regular MCB distribution boards on wall/ woodboard /flush mounting required clamps,bolts,nuts etc.. with provision for fixing suitable type capacity MCB's single phase /3 phase /single door with powder coated painting etc., complete II. Double Door 5.19.13)8 Way TP & N Each 6091.0 6091.0 2.0 False None None False None False 12182.0 0 4016033 155569 None code323 Supplying and fixing and wiring Earth Leakage Miniature Circuit Breaker [RCCB] 240/450V up 300mA sensitivity on exsiting wood/panel board. 5.20.4)32-40 Amps 2 Pole Each 4559.0 4559.0 1.0 False None None False None False 4559.0 0 4016034 155569 None code324 Supplying and fixing and wiring Earth Leakage Miniature Circuit Breaker [RCCB] 240/450V up 300mA sensitivity on exsiting wood/panel board. 5.20.8)32-40 Amps 4 Pole Each 5147.0 5147.0 6.0 False None None False None False 30882.0 0 4016035 155569 None code325 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and wiring complete as required. 5.18.1)6-32Amps SP 1 Group 'A' Each 415.0 415.0 58.0 False None None False None False 24070.0 0 4016036 155569 None code326 Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit … The pit should be filled with equal proportion of salt and charcoal 150mm all-round the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI wire of size as per ISI specification 7.3.3. of IS 732 using 12mm dia bolts, nuts, washers and check nuts etc., the pipe shall have 16 through holes of 12 mm dia Nos 3510.0 3510.0 10.0 False None None False None False 35100.0 0 4016037 155569 None code327 Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40 mm dia 2.9 mm thick 2.5m long GI pipe with GI funnel with mesh and suitable size reducer fixed on the top of the earth electrode.The funnel should be enclosed in a CC chamber of 400x400x400 mm with a cast iron cover. The earth electrode shall have staggered holes of 12 mm dia and the electrode should be covered 150 mm all-round with alternate layers of salt and charcoal from the bottom of the CC chamber. The connection from the electrode is to be established through GI strip using GI bolts and nuts Nos 4256.0 4256.0 4.0 False None None False None False 17024.0 0 4016038 155569 None code328 Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. Copper strip 12.58.2)25 x 3 mm GI strip m 82.0 82.0 180.0 False None None False None False 14760.0 0 4016039 155569 None code329 Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. Copper strip 12.58.3)25 x 6 mm GI strip m 128.0 128.0 90.0 False None None False None False 11520.0 0 4016040 155569 None code330 12.58.7)25 x 3 mm Copper strip m 570.0 570.0 60.0 False None None False None False 34200.0 0 4016041 155569 None code331 Supplying, errection, testing & commissioning of ON-LINE UPS system suitable for operation on 230V, 50Hz, A/C supply, with all accessories complete and Excluding batteries and wiring complete. 9.3.2) 3KVA ON LINE UPS Each 38719.0 38719.0 1.0 False None None False None False 38719.0 0 4016042 155569 None code332 Supplying, errection, testing & commissioning of ON-LINE UPS system suitable for operation on 230V, 50Hz, A/C supply, with all accessories complete and Excluding batteries and wiring complete. 9.5.3) 26 AH Capacity batteries Each 3611.0 3611.0 16.0 False None None False None False 57776.0 0 4016043 155569 None code333 Supplying & fixing cast Aluminium round or oblong type bulk head fitting with GI wire guard,glass cover with 15 watts 230V CFL lamp Each 70.0 70.0 8.0 False None None False None False 560.0 0 4016044 155569 None code334 Supplying of 2 feet LED PVC square batten with high quality diffuser with ife of 25000 burninng hours & 70% lumen maintance with CRI greater than 80. power input :220-240V @ 50 hz & power factor greater than .9 along with CE approved drivers. 5 years warranty 11.3.1)LED light fitting 1x2' -9/10w Each 511.0 511.0 23.0 False None None False None False 11753.0 0 4016045 155569 None code335 Supplying of 2 feet LED PVC square batten with high quality diffuser with ife of 25000 burninng hours & 70% lumen maintance with CRI greater than 80. power input :220-240V @ 50 hz & power factor greater than .9 along with CE approved drivers. 5 years warranty 11.3.2)LED light fitting 1x4' -20/22w Each 690.0 690.0 191.0 False None None False None False 131790.0 0 4016046 155569 None code336 Supplying of recess/Surface mounting non integrated type LED down light ...... W luminaire comprising of pressure decast/ extruded aluminium housing, with spring loaded false ceiling clamps, LED of Power/COB with CCT 6500 degree K, CRI greater than 70%. efficacy greater than 100 lumen per watt, 120degree beam spread, life greater than 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The lamp compartment is enclosed with anti glare opal diffuser which enhances the lighting level. LEDs are driven by HF electronic driver integrated in a separate control gear assembly., with PF greater than 0.95, power loss should lesser than 5% of lamp wattage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 volts. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. 11.5.2) LED square or round down light 10-12W Each 885.0 885.0 20.0 False None None False None False 17700.0 0 4016047 155569 None code337 Supplying of recess/Surface mounting non integrated type LED down light ...... W luminaire comprising of pressure decast/ extruded aluminium housing, with spring loaded false ceiling clamps, LED of Power/COB with CCT 6500 degree K, CRI greater than 70%. efficacy greater than 100 lumen per watt, 120degree beam spread, life greater than 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The lamp compartment is enclosed with anti glare opal diffuser which enhances the lighting level. LEDs are driven by HF electronic driver integrated in a separate control gear assembly., with PF greater than 0.95, power loss should lesser than 5% of lamp wattage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 volts. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. 11.5.3) LED square or round down light 15-18W Each 1324.0 1324.0 30.0 False None None False None False 39720.0 0 4016048 155569 None code338 6.1)Supplying exhaust fan of 1440 RPM of 300mm (12") size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply. a) Group 'A' Each 1492.0 1492.0 16.0 False None None False None False 23872.0 0 4016049 155569 None code339 Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double bail bearing system. 48" Sweep (1200mm) 6.3.1)Regular model (Khaitan, Crompton Greaves, Orient, Polar, Bajaj, Usha, Havells, Almonard) Each 2984.0 2984.0 92.0 False None None False None False 274528.0 0 4016050 155569 None code340 Fixing all types and all capacities of fluorescent / fales ceiling /spot light /CFL / LED fittings indoor on the wall /ceiling / refters / girders using 23/0.0076" twin twisted PVC insulated wires, required Nos of round blocks and clamps . On wall / ceiling / Rafter / Girders Each 122.0 122.0 249.0 False None None False None False 30378.0 0 4016051 155569 None code341 Fixing a ceiling / wall mounting fan of all capacities and all types to the existing 's' hook with fan regulator to the existing board together with supplying and fixiting 5amps . Ceiling rose, necessary length of 23/0.0076 inch PVC insulated twin twisted copper wire and wiring . Each 171.0 171.0 108.0 False None None False None False 18468.0 0 4016052 155569 None code342 Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts and wiring complete. Protection of Overload and Short circuit with thermal Magnetic/Microprocessed release and Earth Fault as per IS-13947. ( Icu = Ics)(34/9) 5.15.10)125Amps 25kA Each 10341.0 10341.0 2.0 False None None False None False 20682.0 0 4016053 155569 None code343 Supplying of multi function digital meter with three line back light LCD type display for voltage,Current,frequency,Power, Powerfactor,KVA, KWH,KVAR suitable for 3 Phase,4 wire LT network with IP 54 degree of protection and completely wired as required with communication Port and Class 0.5s accuracy. a)Group A Each 9315.0 9315.0 1.0 False None None False None False 9315.0 0 4016054 155569 None code344 Supplying,fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based,digital readout of percentage leakage current,programable delay/auto/manual reset facility suitable to mount on DIN rail/flush mounting on panel board. a) Group A Each 9255.0 9255.0 1.0 False None None False None False 9255.0 0 4016055 155569 None code345 Supplying, fixing and wiring 50/5A to 400/5A 5VA Burden class 1 Current Transformer. a)Group A Each 562.0 562.0 4.0 False None None False None False 2248.0 0 4016056 155569 None code346 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and wiring complete as required. 1 Group 'A' 5.18.9)50-63Amps TPN Each 3088.0 3088.0 6.0 False None None False None False 18528.0 0 4016057 155569 None code347 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and wiring complete as required. 1 Group 'A' 5.18.8)40 Amps TPN Each 3044.0 3044.0 4.0 False None None False None False 12176.0 0 4016058 155569 None code348 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and wiring complete as required. 1 Group 'A' 5.18.6)50-63Amps DP Each 1102.0 1102.0 2.0 False None None False None False 2204.0 0 4016059 155569 None code349 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and wiring complete as required. 1 Group 'A' 5.17.4)6-32Amps DP Each 739.0 739.0 3.0 False None None False None False 2217.0 0 4016060 155569 None code350 Supplying,fixing and Fixing of Shunt trip suitable for MCCB. CBCT Each 1703.0 1703.0 3.0 False None None False None False 5109.0 0 4016061 155569 None code351 Supplying …..amps rated 3phase with netural bus bar using required capacity electrolytic alluminium strips covered with heat shrinkable coloured PVC sleeve,mounted on phenolic/ERP/DMC insulator which are mounted on powder coated 40x6 mm M.S.flat frame work in existing panel board.The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts,nuts and washers etc.,complete. 5.40.1)100Amps 4x30x6mm Alluminium Strips m 2465.0 2465.0 3.0 False None None False None False 7395.0 0 4016062 155569 None code352 Supplying …..amps rated 3phase with netural bus bar using required capacity electrolytic alluminium strips covered with heat shrinkable coloured PVC sleeve,mounted on phenolic/ERP/DMC insulator which are mounted on powder coated 40x6 mm M.S.flat frame work in existing panel board.The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts,nuts and washers etc.,complete. 5.40.2)250Amps 4x30x10mm Alluminium Strips m 2465.0 2465.0 4.0 False None None False None False 9860.0 0 4016063 155569 None code353 Fabricating supplying and mounting MS box made out 16 SWG suitable for floor/wall mounting,fully weather proof with provision for better heat dissipation, provided with hinged front cover,equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 2 coats of red oxide primer paint and finally finished with approved colour enameled metal paint etc., complete. 5.42.1)14SWG Sq CM 0.5 0.5 18000.0 False None None False None False 9000.0 0 4016064 155569 None code354 Fabricating supplying and mounting MS box made out 16 SWG suitable for floor/wall mounting,fully weather proof with provision for better heat dissipation, provided with hinged front cover,equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 2 coats of red oxide primer paint and finally finished with approved colour enameled metal paint etc., complete. 5.42.2)16SWG Sq CM 0.43 0.43 21000.0 False None None False None False 9030.0 0 4016065 155569 None code355 Supplying and fixing angle iron frame work fabricated out of M.S ange iron..and M.S.flat ….with bolts,washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint. 5.41.2) 50x50x6mm m 395.0 395.0 6.0 False None None False None False 2370.0 0 4016066 155569 None code356 Supplying and fixing angle iron frame work fabricated out of M.S ange iron..and M.S.flat ….with bolts,washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint. 5.41.3)75x75x6mm C channel m 555.0 555.0 8.0 False None None False None False 4440.0 0 4016067 155569 None code357 Supplying and fixing of LED type pannel board indicating lamp with reqired colour suitable for 220v A.C.50 Hz 12/24v D.C. a)Group A Each 515.0 515.0 3.0 False None None False None False 1545.0 0 4016068 155569 None code358 Supplying of LT UG cable having aluminium conductor PVC insulated, sheathed, galvanised, steel wire/steel tap armoured cable with PVC outer sheathing 1.1 KV class I.Class 'A' PVC Cable 6.4.2) 4 core 10 sqmm m 130.0 130.0 120.0 False None None False None False 15600.0 0 4016069 155569 None code359 Supplying of LT UG cable having aluminium conductor PVC insulated, sheathed, galvanised, steel wire/steel tap armoured cable with PVC outer sheathing 1.1 KV class I.Class 'A' PVC Cable 6.4.2) 4 core 16 sqmm m 150.0 150.0 75.0 False None None False None False 11250.0 0 4016070 155569 None code360 Supplying of LT UG cable having aluminium conductor PVC insulated, sheathed, galvanised, steel wire/steel tap armoured cable with PVC outer sheathing 1.1 KV class I.Class 'A' PVC Cable 6.4.5)3.5 core 25 sqmm m 180.0 180.0 65.0 False None None False None False 11700.0 0 4016071 155569 None code361 Supplying of LT UG cable having aluminium conductor PVC insulated, sheathed, galvanised, steel wire/steel tap armoured cable with PVC outer sheathing 1.1 KV class I.Class 'A' PVC Cable 6.4.8)3.5 core 70 sqmm m 350.0 350.0 120.0 False None None False None False 42000.0 0 4016072 155569 None code362 Labour charges for laying of 1.1 KV class UG cable in existing trench GI pipe / stoneware pipe / on wall / on pole as required In existing trench/duct. 6.5.1) 6 sqmm to 16 sqmm m 11.88 11.88 195.0 False None None False None False 2316.6 0 4016073 155569 None code363 Labour charges for laying of 1.1 KV class UG cable in existing trench GI pipe / stoneware pipe / on wall / on pole as required In existing trench/duct. 6.5.2) 25 sqmm to 75 sqmm m 15.5 15.5 125.0 False None None False None False 1937.5 0 4016074 155569 None code364 Supplying tinnd copper lugs and crimping and wiring to terminal point for wire of the following sizes 6.17.5) 10 sqmm Each 8.0 8.0 2.0 False None None False None False 16.0 0 4016075 155569 None code365 Supplying tinnd copper lugs and crimping and wiring to terminal point for wire of the following sizes .6.17.6) 16 sqmm Long Barrel Each 20.0 20.0 4.0 False None None False None False 80.0 0 4016076 155569 None code366 Supplying tinnd copper lugs and crimping and wiring to terminal point for wire of the following sizes 6.17.7) 25 sqmm Long Barrel Each 190.0 190.0 2.0 False None None False None False 380.0 0 4016077 155569 None code367 Supplying tinnd copper lugs and crimping and wiring to terminal point for wire of the following sizes 6.17.10) 70sqmm Long Barrel Each 190.0 190.0 6.0 False None None False None False 1140.0 0 4016078 155569 None code368 Supplying and fixingof heavy duty cable glands suitable or UG cable o 1.1KV class (metal only) 6.11.2) 25 mm dia Each 84.0 84.0 6.0 False None None False None False 504.0 0 4016079 155569 None code369 Supplying and fixingof heavy duty cable glands suitable or UG cable o 1.1KV class (metal only) 6.11.3) 32 mm dia Each 117.0 117.0 2.0 False None None False None False 234.0 0 4016080 155569 None code370 Supplying and fixingof heavy duty cable glands suitable or UG cable o 1.1KV class (metal only) 6.11.4) 45 mm dia Each 194.0 194.0 6.0 False None None False None False 1164.0 0 4016081 155569 None code371 77.22) Supply & fixing of Caution/Danger name board as per drawing( BESCOM SR . CDS-1) Each 207.0 207.0 10.0 False None None False None False 2070.0 0 4016082 155569 None code372 Providing and filling sand in excavated trench to cover already laid UG cable to a depth of 150mm alround the cable. m 100.0 100.0 230.0 False None None False None False 23000.0 0 4016083 155569 None code373 Digging of trench of 0.6m deep x 0.50 mtr wide refiling the trench to the required ground level and consolidating etc., complete. 6.6.1) In soil (Ordinary) m 76.0 76.0 230.0 False None None False None False 17480.0 0 4016084 155569 None code374 PART A - Providing 2 pole structure at tapping point from the existing feeder / sub-station RCC poles DP structure using 9 Mtrs Long RCC pole with 145kg W.L With structure Kit. Set 20928.0 20928.0 1.0 False None None False None False 20928.0 0 4016085 155569 None code375 11 kv,5kA Polymeric pin insulators (24mm Dia FRP ROD) Nos 205.0 205.0 6.0 False None None False None False 1230.0 0 4016086 155569 None code376 11Kv-45kN Polymeric disc insulators Nos 186.0 186.0 6.0 False None None False None False 1116.0 0 4016087 155569 None code377 Guy set complete with No. 15 strain insulators 7/10 SWG guy wire ,Guy Clamp, turn buckle & Anchor rod Set 1170.0 1170.0 2.0 False None None False None False 2340.0 0 4016088 155569 None code378 Caution/danger board No 150.0 150.0 1.0 False None None False None False 150.0 0 4016089 155569 None code379 Anti climbing devices (12m GI barbed wire ) Kg 89.0 89.0 2.0 False None None False None False 178.0 0 4016090 155569 None code380 11kV 400A Double Break GOS Set 21260.0 21260.0 1.0 False None None False None False 21260.0 0 4016091 155569 None code381 H-frame for mounting GOS No 4337.0 4337.0 1.0 False None None False None False 4337.0 0 4016092 155569 None code382 Spiral earth electrode Nos 239.0 239.0 2.0 False None None False None False 478.0 0 4016093 155569 None code383 Lighting arresters ,9Kv,5kv metal oxide ceramic type with grounding disconnector (set/3No's) Set 1584.0 1584.0 1.0 False None None False None False 1584.0 0 4016094 155569 None code384 Earthing material pipe type for grounding Set 1729.0 1729.0 1.0 False None None False None False 1729.0 0 4016095 155569 None code385 11kV Dolo cutouts (1 set/3No's) Set 5872.0 5872.0 1.0 False None None False None False 5872.0 0 4016096 155569 None code386 Erection of 9Mts RCC DP Structure Long including fixing of structure kit & erection of poles Set 5372.0 5372.0 1.0 False None None False None False 5372.0 0 4016097 155569 None code387 Fixing of guyset with break insulator turn buckle and anchor rod Set 593.0 593.0 2.0 False None None False None False 1186.0 0 4016098 155569 None code388 Caution /danger board No 80.0 80.0 1.0 False None None False None False 80.0 0 4016099 155569 None code389 Fixing of Anticlimbing devices (Barbed Wire) Kg 42.0 42.0 2.0 False None None False None False 84.0 0 4016100 155569 None code390 Fixing of 400A 11kV D/B GOS With Wiring Set 1214.0 1214.0 1.0 False None None False None False 1214.0 0 4016101 155569 None code391 Erection of 'H' frame for mounting GOS Set 323.0 323.0 1.0 False None None False None False 323.0 0 4016102 155569 None code392 Fixing of spiral earth electrode along with pole Nos 93.0 93.0 2.0 False None None False None False 186.0 0 4016103 155569 None code393 Fixing of 11Kv lighting arrestor (set/3Nos) Set 119.0 119.0 1.0 False None None False None False 119.0 0 4016104 155569 None code394 Fixing of earth electrode Set 949.0 949.0 1.0 False None None False None False 949.0 0 4016105 155569 None code395 Fixing of DOLO cut out and Wiring (set/3Nos) Set 237.0 237.0 1.0 False None None False None False 237.0 0 4016106 155569 None code396 Guy concreting with Boulders, Mud and Sand Nos 250.0 250.0 2.0 False None None False None False 500.0 0 4016107 155569 None code397 Painting of 9 mtrs long RCC poles of dp structure Nos 960.0 960.0 2.0 False None None False None False 1920.0 0 4016108 155569 None code398 Providing cement concrete to 9 mtrs RCC poles including material & labour charges & curing a) Base concreting with cc 1:4:8500X650X150mm Nos 312.0 312.0 2.0 False None None False None False 624.0 0 4016109 155569 None code399 Providing cement concrete to 9 mtrs RCC poles including material & labour charges & curing b) Pole concreting in cc 1:2:4,650X500X1700mm Nos 3434.0 3434.0 2.0 False None None False None False 6868.0 0 4016110 155569 None code400 Providing cement concrete to 9 mtrs RCC poles including material & labour charges & curing b) Providing coping in cc1:2:4,650X500X1700mm alround the pole for a height of 300mm from ground level Nos 312.0 312.0 2.0 False None None False None False 624.0 0 4016111 155569 None code401 PART B : Erection of 3phase ,11KV / 433 Volts 63KVA,BEE 5 star rated distribution transformer centre using Double pole transformer structure [ D.P.T.S] MATERIAL COST 9mtrs Long RCC DP transformer structure using 9mtrs Long RCC poles structure kit. Set 31554.0 31554.0 1.0 False None None False None False 31554.0 0 4016112 155569 None code402 11KV,5KN polymeric pin insulator (24mm dia FRP rod ) Nos 205.0 205.0 3.0 False None None False None False 615.0 0 4016113 155569 None code403 11KV,45KN polymeric Disc insulator Nos 186.0 186.0 3.0 False None None False None False 558.0 0 4016114 155569 None code404 Guyset complete with No 15 strain insulator 7/10 SWG guywire guyclamp, turn buckle and anchor rod Set 1171.0 1171.0 4.0 False None None False None False 4684.0 0 4016115 155569 None code405 11KV /433V,3phase,63KVA 3phese 50 cycles distribution transformer BEE -5 star rated with oil No 182545.0 182545.0 1.0 False None None False None False 182545.0 0 4016116 155569 None code406 Earthing material pipe type for grounding Set 1729.0 1729.0 3.0 False None None False None False 5187.0 0 4016117 155569 None code407 Caution / danger board No 150.0 150.0 1.0 False None None False None False 150.0 0 4016118 155569 None code408 Anti climbing devices (12mtr GI barbed wire) Kg 89.0 89.0 2.0 False None None False None False 178.0 0 4016119 155569 None code409 GI wire 8 SWG Kg 75.4 75.4 5.0 False None None False None False 377.0 0 4016120 155569 None code410 Guy wire 7/10 SWG Kg 77.23 77.23 10.0 False None None False None False 772.3 0 4016121 155569 None code411 11KV Lighting arresters metal oxide 9KV,5KA polymeric type with grounding disconnector (set/3no's) Set 1584.0 1584.0 1.0 False None None False None False 1584.0 0 4016122 155569 None code412 LT Protection Kit for 63KVA Nos 2023.0 2023.0 2.0 False None None False None False 4046.0 0 4016123 155569 None code413 LT Distrubution box No 22686.0 22686.0 1.0 False None None False None False 22686.0 0 4016124 155569 None code414 LT wiring (From DTC to LT line through metering box & LT Protection Kit )single circuit Set 10080.0 10080.0 1.0 False None None False None False 10080.0 0 4016125 155569 None code415 LT electronic trivector meter 5A class -0.5/1.0 accurracy Nos 3396.0 3396.0 1.0 False None None False None False 3396.0 0 4016126 155569 None code416 LT matering box with CTs and necessary wiring for housing ETV meter Nos 5126.0 5126.0 1.0 False None None False None False 5126.0 0 4016127 155569 None code417 11kv class solid core type HG fuse unit (set /3no's) Set 1069.0 1069.0 1.0 False None None False None False 1069.0 0 4016128 155569 None code418 11KV 200AMPS single break GOS Set 9450.0 9450.0 1.0 False None None False None False 9450.0 0 4016129 155569 None code419 H frame for mounting 11 kv ,200A S/B GOS Set 4332.0 4332.0 1.0 False None None False None False 4332.0 0 4016130 155569 None code420 Spiral earth electrode Nos 239.0 239.0 2.0 False None None False None False 478.0 0 4016131 155569 None code421 Erection of 9Mts RCC DP transformer Structure Set 6983.0 6983.0 1.0 False None None False None False 6983.0 0 4016132 155569 None code422 Fixing of guyset with break insulators turu suckle & anchor rod Set 593.0 593.0 4.0 False None None False None False 2372.0 0 4016133 155569 None code423 Erection of 63 KVA transformer No 1193.0 1193.0 1.0 False None None False None False 1193.0 0 4016134 155569 None code424 Providing Earthings Set 949.0 949.0 3.0 False None None False None False 2847.0 0 4016135 155569 None code425 Fixing of caution / danger board No 80.0 80.0 1.0 False None None False None False 80.0 0 4016136 155569 None code426 Providing Anticlimbing devices Nos 42.0 42.0 2.0 False None None False None False 84.0 0 4016137 155569 None code427 Fixing of 11kv lighting arrestors (set/3no's) Set 119.0 119.0 1.0 False None None False None False 119.0 0 4016138 155569 None code428 Fixing of LT LT Protection Kit Nos 712.0 712.0 2.0 False None None False None False 1424.0 0 4016139 155569 None code429 Fixing of LT Distribution box No 385.0 385.0 1.0 False None None False None False 385.0 0 4016140 155569 None code430 Providing LT wiring No 949.0 949.0 1.0 False None None False None False 949.0 0 4016141 155569 None code431 Fixing of LT metering box No 865.0 865.0 1.0 False None None False None False 865.0 0 4016142 155569 None code432 Fixing of LT electronic trisector meter No 480.0 480.0 1.0 False None None False None False 480.0 0 4016143 155569 None code433 Fixing of HG fuse unit Set 237.0 237.0 1.0 False None None False None False 237.0 0 4016144 155569 None code434 Erection of 200A single break GOS Set 1104.0 1104.0 1.0 False None None False None False 1104.0 0 4016145 155569 None code435 Erection of 'H' frame for mounting GOS No 232.0 232.0 1.0 False None None False None False 232.0 0 4016146 155569 None code436 Fixing of spiral earth electrodes Nos 93.0 93.0 2.0 False None None False None False 186.0 0 4016147 155569 None code437 Guy concreting with boulders mud & sand Nos 250.0 250.0 4.0 False None None False None False 1000.0 0 4016148 155569 None code438 Providing Painting of 9mts RCC of DP structure poles Nos 960.0 960.0 2.0 False None None False None False 1920.0 0 4016149 155569 None code439 Providing cement concrete to 9mtrs RCC poles including material and labour cost a) Base concreting in cc 1:4:8,500X650X150mm Nos 312.0 312.0 2.0 False None None False None False 624.0 0 4016150 155569 None code440 Providing cement concrete to 9mtrs RCC poles including material and labour cost b) pole concreting in cc 1:2:4:650X500X1700mm Nos 3434.0 3434.0 2.0 False None None False None False 6868.0 0 4016151 155569 None code441 Providing cement concrete to 9mtrs RCC poles including material and labour cost c) pole coping in cc 1:2:4 and as per actuals Nos 312.0 312.0 2.0 False None None False None False 624.0 0 4016152 155569 None code442 11KV 3Cx95Sqmm HT UG cable for insulations high quality clean XLPE compound shall be used (tree from microvoids moisture content ambers and contaminations ) with pressure extruded in sheeth ROUND WIRE ARMOURED as per IS-7098.3CX95sqmm (2Run) Km 1115615.0 1115615.0 0.13 False None None False None False 145029.95 0 4016153 155569 None code443 11kv Heat shrinkable outdoor type cable termination kit for XLPE cable of 95 sqmm Kit 3966.0 3966.0 1.0 False None None False None False 3966.0 0 4016154 155569 None code444 11kv Heat shrinkable indoor type cable termination kit for XLPE cable of 95 sqmm Kit 3651.0 3651.0 1.0 False None None False None False 3651.0 0 4016155 155569 None code445 Cable covering tiles 250X125X40mm Nos 10.0 10.0 225.0 False None None False None False 2250.0 0 4016156 155569 None code446 River Sand Cum 1700.0 1700.0 10.0 False None None False None False 17000.0 0 4016157 155569 None code447 Rcc home pipes 2000mm long 150mm dia Nos 300.0 300.0 2.0 False None None False None False 600.0 0 4016158 155569 None code448 Collars for Rcc hume pipes Nos 80.0 80.0 2.0 False None None False None False 160.0 0 4016159 155569 None code449 GI pipe 100mm dia m 1528.0 1528.0 20.0 False None None False None False 30560.0 0 4016160 155569 None code450 Route and joint indicating stores with MS anchor rod Nos 130.0 130.0 2.0 False None None False None False 260.0 0 4016161 155569 None code451 Earth worth excavation for cable trench of 0.5 to 0.75 mtr width and depth up to 1 mtr including trial pits depending on bank up to a lead of 50mtrs. Supply and displaying necessary danger board's and lighting . Using sight ruels and sign board at every 100mts wherever necessary as directed in ordinary soil Cum 260.0 260.0 30.0 False None None False None False 7800.0 0 4016162 155569 None code452 Laying of cable in existing trench 3X95 sqmm Km 45284.0 45284.0 0.13 False None None False None False 5886.92 0 4016163 155569 None code453 Refilling the cable trenches with selected available earth from trench excavation including watering , consolidation in layers of 15cm thickness including depositing of the surplus earth with a lead Cum 58.0 58.0 40.0 False None None False None False 2320.0 0 4016164 155569 None code454 Making and fixing terminations kit(pothead) for HT cable of 3X95sqmm Nos 1965.0 1965.0 6.0 False None None False None False 11790.0 0 4016165 155569 None code455 Covering the cable with tiles Km 3292.0 3292.0 0.01 False None None False None False 32.92 0 4016166 155569 None code456 Spreading and forming with sand around the cable to a depth of 75mm and width of 500mm Km 11570.0 11570.0 0.01 False None None False None False 115.7 0 4016167 155569 None code457 Laying of rcc hume pipe 2000mm long and 150mm dia m 51.0 51.0 4.0 False None None False None False 204.0 0 4016168 155569 None code458 Laying of GI pipe 100mm dia m 58.0 58.0 20.0 False None None False None False 1160.0 0 4016169 155569 None code459 Fixing of route and joint indicating stores Nos 86.0 86.0 2.0 False None None False None False 172.0 0 4016170 155569 None code460 Providing chain link fencing 50mm size of 8 gauge properly stretched between rectangular poles and fixed with suitable bolts and nuts the tree end shall be welded to the pole and block pipe at top and bottom as required including cost of all materials,labour,lead and lifts,cutting,bending whereever necessary,wastage and lapping etc complete as per the directions of the engineer incharge of work including two coats of approved quality paint over one coat of primary paint. Sqm 983.0 983.0 32.0 False None None False None False 31456.0 0 4016171 155569 None code461 Fabricating ,supplying and erecting swaged tubular pole of height … Mtr having three sections , and providing two coats of red oxide paint & finised with two coats of enameled paint of approved quality & colour & M.S. base plate of suitable size welded at the bottom of the pole (as per IS) and 40mm dia GI /flexible PVC pipe of 1 mtr length fitted to the heavy gauge polycarbonate control box including 5 way connector of size 167X125X82mm for 7.5M pole /200X160X98mm for remaining length of pole with front opening cover with locking arrangements and suitable capacity MCB/DP switch, The pole shall be erected in cement concrete work (1:2:4) including excavation and refilling of planting depth of the pole to the ground level and the coping CC shall be up to 0.6M above ground level as per IS 2713-7. Erection of heavy duty pole on footpath/median 9Mt (5Mt Hb,165.1mm dia 4.85mm thick x2M Hm,139.7mm dia 4.50mm thick x 2M Ht,114.3mm dia 3.65mm thick ) as per IS 410 SP 32 Each 15500.0 15500.0 4.0 False None None False None False 62000.0 0 4016172 155569 None code462 Supplying, and fixing of Hot dip Galvanized suitable for out door luminaries and mounted on Octagonal pole using necessary bolts, nuts etc., complete. Single Arm Bracket with 1000mm Standard 40/50MM dia Each 1700.0 1700.0 4.0 False None None False None False 6800.0 0 4016173 155569 None code463 Supplying of LT UG cable having aluminium conductor PVC insulated, sheathed, galvanised, steel wire/steel tap armoured cable with PVC outer sheathing 1.1 KV class I.Class 'A' PVC Cable 6.4.2) 4 core 10 sqmm m 130.0 130.0 310.0 False None None False None False 40300.0 0 4016174 155569 None code464 Labour charges for laying of 1.1 KV class UG cable in existing trench GI pipe / stoneware pipe / on wall / on pole as required In existing trench/duct. 6.5.2) 25 sqmm to 75 sqmm m 15.5 15.5 310.0 False None None False None False 4805.0 0 4016175 155569 None code465 Supplying tinnd copper lugs and crimping and wiring to terminal point for wire of the following sizes 10 sqmm Each 8.0 8.0 8.0 False None None False None False 64.0 0 4016176 155569 None code466 Supplying and fixingof heavy duty cable glands suitable or UG cable o 1.1KV class (metal only) 25 mm dia Each 84.0 84.0 8.0 False None None False None False 672.0 0 4016177 155569 None code467 Digging of trench of 0.6m deep x 0.50 mtr wide refiling the trench to the required ground level and consolidating etc., complete. In soil (ordinary) m 76.0 76.0 290.0 False None None False None False 22040.0 0 4016178 155569 None code468 Supply and installation /Fixing /Provision of Outdoor type Thermoplastic Modular Panel enclosure with transparent Polycarbonate Lid, shock proof ,IP65 (Weather proof ),rust proof,dust proof,water proof,corrosion proof having internally Embedded gasket on both lid and flap suitable to fix Single Phase/Three phase Energy Meter in suitable base plate and having a provision for Fuse/MCB cutout with suitable transparent hinged flap opening for operating MCB along with complete tamper proof sealing facility . a)300mmX300mmX214mm Each 4512.0 4512.0 1.0 False None None False None False 4512.0 0 4016179 155569 None code469 Supplying and fixing Microprocessor based Electronic timer (without contactor,Din Mounting using necessary bolts,nuts and washers etc.,.)3-120sec setting. Each 2315.0 2315.0 3.0 False None None False None False 6945.0 0 4016180 155569 None code470 Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of ani glare clear diffuser with Injection moulded polycarbonate material, deliverying superior light output. Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70% degrees. CCT 5500K, IP 66 optical and elecrical compartment & impact resistance of complete luminaire greater than IK08. Power Factory greater than 0.9 with mains, Surge Protection - Min 5KV along with Over voltage/Overload, short circuit/ miss-wiring protection. Comptatible for pole mouting with oter dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz appplication. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenace at the sight site location with minimized minimal tools. LED Light fixture with W System Power consumption. LED Efficiency greater than 130lm/w, nominal CRI greater than 75. Luminaire manufacturere should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008. Housing with supplier word makr /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/Lumileds/Osram make LED Source. LED street light 90W No 8860.0 8860.0 4.0 False None None False None False 35440.0 0 4016181 155569 None code471 Supply & Installation of IP based H.264 Fixed colour Indoor dome type 2.0 mega pixels Day / Night camera, with high quality VGA CMOS sensor. with inbuilt IR filters and powered through POE (Power over Ethernet enabled). or 12V DC power supply unit with all fixing accessories. Make : Hikvision/CP Plus Each 5750.0 5750.0 17.0 False None None False None False 97750.0 0 4016182 155569 None code472 Supply & Installation of IP based H.264 Fixed colour C/Mount 2.0 mega pixels Day / Night camera, with high quality VGA CMOS sensor. with inbuilt IR filters and powered through POE (Power over Ethernet enabled). or 12V DC power supply unit with all fixing accessories. Make: Hikvision/CP Plus Each 5750.0 5750.0 13.0 False None None False None False 74750.0 0 4016183 155569 None code473 16 channel NVR Make : HIKVISION/ CP Plus Each 25000.0 25000.0 1.0 False None None False None False 25000.0 0 4016184 155569 None code474 32 channel NVR Make : HIKVISION/ CP Plus Each 35000.0 35000.0 1.0 False None None False None False 35000.0 0 4016185 155569 None code475 4 TB hard disc Each 15000.0 15000.0 4.0 False None None False None False 60000.0 0 4016186 155569 None code476 21 Colour SVGA TFT Monitor Make: Samsung/Equ. Each 12000.0 12000.0 1.0 False None None False None False 12000.0 0 4016187 155569 None code477 Supply & Installation of IP based H.264 Fixed colour Indoor dome type 2.0 mega pixels Day / Night camera, with high quality VGA CMOS sensor. with inbuilt IR filters and powered through POE (Power over Ethernet enabled). or 12V DC power supply unit with all fixing accessories. Make : Hikvision/CP Plus Each 350.0 350.0 17.0 False None None False None False 5950.0 0 4016188 155569 None code478 Supply & Installation of IP based H.264 Fixed colour C/Mount 2.0 mega pixels Day / Night camera, with high quality VGA CMOS sensor. with inbuilt IR filters and powered through POE (Power over Ethernet enabled). or 12V DC power supply unit with all fixing accessories. Make: Hikvision/CP Plus Each 350.0 350.0 13.0 False None None False None False 4550.0 0 4016189 155569 None code479 16 channel NVR Make : HIKVISION/ CP Plus Each 1000.0 1000.0 1.0 False None None False None False 1000.0 0 4016190 155569 None code480 32 channel NVR Make : HIKVISION/ CP Plus Each 1000.0 1000.0 1.0 False None None False None False 1000.0 0 4016191 155569 None code481 4 TB hard disc Each 1200.0 1200.0 4.0 False None None False None False 4800.0 0 4016192 155569 None code482 21 Colour SVGA TFT Monitor Make: Samsung/Equ. Each 350.0 350.0 1.0 False None None False None False 350.0 0 4016193 155569 None code483 Supplying and drawing UTP-CAT 6E LAN Cable a)Group A m 38.0 38.0 2850.0 False None None False None False 108300.0 0 4016194 155569 None code484 Supplying and drawing PVC flexible one pair telephone unarmoured tinner copper cable of approval make. 8.2.2)2 Pair m 21.0 21.0 225.0 False None None False None False 4725.0 0 4016195 155569 None code485 Supplying and drawing PVC flexible one pair telephone unarmoured tinner copper cable of approval make. 8.2.6)10 Pair m 81.0 81.0 45.0 False None None False None False 3645.0 0 4016196 155569 None code486 supplying fixing of network switches Supplying & fixing of switch mounting rack with power manager & cable manger 8.4.4)9U with 450mm depth Each 8476.0 8476.0 1.0 False None None False None False 8476.0 0 4016197 155569 None code487 supplying fixing of I/O socket with back box 8.10.1)Single I/o Each 490.0 490.0 75.0 False None None False None False 36750.0 0 4016198 155569 None code488 supplying fixing of I/O socket with back box 8.10.2)Double I/o Each 550.0 550.0 10.0 False None None False None False 5500.0 0 4016199 155569 None code489 supplying fixing of patch panel for LAN cabling 8.9.7)16 port 10/100/1000switch Each 1050.0 1050.0 3.0 False None None False None False 3150.0 0 4016200 155569 None code490 supplying fixing of PVC inssulated gas injected physical foam jelly flooded co-axial TV RG-6 cable m 42.0 42.0 250.0 False None None False None False 10500.0 0 4016201 155569 None code491 supplying fixing of … mtrs Cat6 patch cable 8.11.1)1mtr Each 224.0 224.0 75.0 False None None False None False 16800.0 0 4016202 155569 None code492 supplying fixing of … mtrs Cat6 patch cable 8.11.2)2mtr Each 257.0 257.0 15.0 False None None False None False 3855.0 0 4016203 155569 None code493 MDF 8.13.1) 10Pair Each 345.0 345.0 2.0 False None None False None False 690.0 0 4016204 155569 None code494 Supplaying & Fixind of Power strip Each 1000.0 1000.0 2.0 False None None False None False 2000.0 0
generalCriterionList	createdTs version createdDate modifiedDate criterionType description tenderEligibilityCriterionDocumentList 1726570822000 0 None None ELIGIBILITY Tenders from Joint ventures are not acceptable. None 1726570822000 0 None None ELIGIBILITY Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka None 1726570822000 0 None None ELIGIBILITY Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document. None 1726570822000 0 None None ELIGIBILITY It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission. None 1726570822000 0 None None ELIGIBILITY EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection. None 1726570831000 0 None None ELIGIBILITY The tender document is part and parcel of the agreement. None 1726570835000 0 None None ELIGIBILITY The contractor shall obtain insurance coverage for all the workers deployed for this work. None 1726570842000 0 None None ELIGIBILITY Further details of the work or any clarifications can be obtained from the office of the Executive Engineer (Central office), KHB, Cauvery Bhavan, K.G. Road, Bangalore Ph: 080-22273511 ext-317, None 1726570845000 0 None None ELIGIBILITY The intending bidders are requested to note that they should abide by the detailed instructions and conditions contained in the Tender documents and further modifications done if any. None 1726570849000 0 None None ELIGIBILITY Corrigendum/modification/corrections, if any, will be published in the e procurement Web sites only. None 1726570853000 0 None None ELIGIBILITY KHB reserves the right to withdraw or cancel this invitation to BID/Tender without assigning any reason whatsoever None 1726570856000 0 None None ELIGIBILITY The bidder shall study the Tender document Carefully and quote the rates None 1726570860000 0 None None ELIGIBILITY All scanned documents to be uploaded shall be in original and are to be produced to the Executive Engineer to verify the documents within 3 days from the day of opening of Technical bid for verification, if required. None 1726570864000 0 None None ELIGIBILITY Drawings uploaded are only for Tender Purpose only. None 1726570867000 0 None None ELIGIBILITY GST shall be added separately in the estimate. None 1726570871000 0 None None ELIGIBILITY GST shall be paid to the tendered amount separately. None 1726570874000 0 None None ELIGIBILITY The bidder should maintain register of laborers deployed and wages paid for the workers and shall produce the documents whenever called for by the competent authority. Remittance towards PF shall be commensurate with the labour component of the work involved. None 1726570878000 0 None None ELIGIBILITY The bidder shall give an undertaking that they would abide by the provisions of employees provident fund and shall remit PF of labourers to the respective PF offices or else KHB have the right to deduct the PF amount from the work bills and remit the same to respective PF offices. None 1726570883000 0 None None ELIGIBILITY The contractor shall quote his rates inclusive of PF as per the applicable rate as issued by the PF department from time to time None 1726570888000 0 None None ELIGIBILITY The successful bidder shall give an under taking that they would abide by the provisions of the Employees Provident Fund Act. None
preQualCriterionList	None
technicalCriterionList	createdTs version createdDate modifiedDate description criterionCategoryText criterionTypeOthersValue tenderTechnicalCriterionDocumentList None None None None Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs) None None None None None None Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender) None None None None None None Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction) None None None None None None Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year None None None None None None Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year None None None None None None Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx) None None None None None None Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period) None None None None None None Total value of civl engineering works executed and payments received in the last five years (year-wise) None None None None None None List of existing commitments and ongoing works None None None None None None List of works for which tenders already submitted None None None None None None Banker Details for reference None None None None None None Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded None None None None None None Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years None None None None None None Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded None None None None None None List of Financial Resources with Certificates None None None None None None Scanned Copy of documentary proof for having executed similar nature of work not less than 50% of tender amount as defined in Government order No.FD 480 EXP-12/2014,Bangalore dated:19.07.2014 Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None Scanned copy of Pre-qualification letter issued by Karnataka Housing Board. Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Scanned copy of Pre-qualification letter issued by Karnataka Housing Board. None None None None As per Tender Documents KW-4 clause 3.3 key & critical equipments available. Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- As per Tender Documents KW-4 clause 3.3 key & critical equipments available. None None None None Executed in any one Financial year, the minimum quantities of work as mentioned in tender document Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Executed in any one Financial year, the minimum quantities of work as mentioned in tender document None None None None Required valid electrical license for executing similar nature of work as per tender document Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Required valid electrical license for executing similar nature of work as per tender document None None None None The Tenderer should have executed similar water supply/sanitary engineering works as per tender document Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- The Tenderer should have executed similar water supply/sanitary engineering works as per tender document None None None None Income Tax returns & PAN Financial Status None createdTs version createdDate modifiedDate documentName None None None None ITR Filed Copy (Mentioning PAN) None None None None GST Registration Certificate Financial Status None createdTs version createdDate modifiedDate documentName None None None None GST Registration None None None None To qualify for award of this contract , each tenderer in its name should have in the last five years achieved in at least two financial years a minimum financial turnover (In all classes of civil engineering construction works only) Financial Status None createdTs version createdDate modifiedDate documentName None None None None Audited CA Certificate of Annual Turnover None None None None Scanned copy of latest GST clearance certificate. Financial Status None createdTs version createdDate modifiedDate documentName None None None None Others -- Scanned copy of latest GST clearance certificate. None None None None Scanned copy of Credit lines/ letter of credit /Bankers certificate for at least 20% of amount put to tender in the current financial year on the name of work put to tender. Financial Status None createdTs version createdDate modifiedDate documentName None None None None Line of Credit None None None None Assessed Available Bid Capacity as per tender document Financial Status None createdTs version createdDate modifiedDate documentName None None None None Others -- Assessed Available Bid Capacity as per tender document None None None None Covering letter. Others Covering letter. createdTs version createdDate modifiedDate documentName None None None None Others -- Covering letter.
tenderCriterionDocumentList	documentName optional documentTypeText Annual Turnover Certificate True Technical Bid Company Registration Certificate True Technical Bid Reserved Category Certificate False Technical Bid Small Scale Industries Certificate False Technical Bid Work done certificate True Technical Bid key and critical equipment LIST True Technical Bid Income Tax returns & PAN no. True Technical Bid Pre-qualification certificate issued by KHB True Technical Bid GST clearance certificate True Technical Bid Credit lines/ letter of credit/Bankers certificate True Technical Bid Assessed available tender capacity calculation True Technical Bid Electrical license True Technical Bid Work done certificate with quantities True Technical Bid
tenderWorkLocationList
tenderAddress	createdTs 1726577135000 version 0 createdDate None modifiedDate None blockNumber CAUVERY BHAVAN 3RD FLOOR street None city Bengaluru state Karnataka pin 560009
tenderRecallDTO	None