| 4026666 | 156101 | None | code01 | Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work..(P.No.5, I.No. 1.4 .1CMN SR 2023-24). | Cum | 242.0 | 242.0 | 16.65 | False | None | None | False | None | False | 4029.3 | 0 |
| 4026667 | 156101 | None | code02 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:4:8( M5) Using 40 mm nominal size graded crushed coarse aggregates complete as per specifications and as per directions of Engineer-in-charge PWD SR 2023-24 Volume No 01 It No 2.1.2 Pg No 15 | Cum | 5832.0 | 5832.0 | 4.54 | False | None | None | False | None | False | 26477.28 | 0 |
| 4026668 | 156101 | None | code03 | Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) complete as per specifications and as per directions of Engineer-in-chargePWD DSR 2023-24 Volume No 02 It No 5.4 Pg No 09 | Cum | 6389.0 | 6389.0 | 5.03 | False | None | None | False | None | False | 32136.67 | 0 |
| 4026669 | 156101 | None | code04 | Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates complete as per specifications and as per directions of Engineer-in-charge.PWD DSR 2023-24 Volume No 02 It No 2.3.1 Pg No 07 | Cum | 9364.0 | 9364.0 | 4.46 | False | None | None | False | None | False | 41763.44 | 0 |
| 4026670 | 156101 | None | code05 | Providing Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work including straightening, cut ting, bending, placing in position, binding andanchoring to adjacent members whereever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. (The laps and wastages shall not be measured separately (P.No. 84 I.No.11.32 BLDG SR 2023-24) | Tonne | 89457.0 | 89457.0 | 0.45 | False | None | None | False | None | False | 40255.65 | 0 |
| 4026671 | 156101 | None | code06 | Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. (P.No. 113 I.No.6.2 BLDG SR 2023-24) | Cum | 7978.0 | 7978.0 | 11.43 | False | None | None | False | None | False | 91188.54 | 0 |
| 4026672 | 156101 | None | code07 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.PWD DSR 2023-24 Volume No 02 It No 11.5.1 Pg No 77 | Sqm | 4478.0 | 4478.0 | 4.86 | False | None | None | False | None | False | 21763.08 | 0 |
| 4026673 | 156101 | None | code08 | Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long brackets of 15x15mm M.S Square tube, the entire door frame to be reinforced with 19x19mm M.S Square tube of 19 gauge. The door frame to be fixed to the wall using M.S. Screws of 65/80mm size complete as per manufacturers specification & direction of Engineer-in-charge (P.No. 103 I.No.12.54 BLDG SR 2023-24 ) | Mtr | 318.0 | 318.0 | 11.4 | False | None | None | False | None | False | 3625.2 | 0 |
| 4026674 | 156101 | None | code09 | Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Prelaminated PVC C Channel of 5mm thick sheet & 30x50mm wide to form stiles & 5mm thick & 75mm wide Prelaminated PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet Prelaminated on either side fitted in the M.S. frame, Sealed to the stiles & rails with PVC Designer beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75mm Aluminium hinges.(P.No.77 I.No.12.55 BLDG SR2023-24 | Sqm | 2366.0 | 2366.0 | 6.3 | False | None | None | False | None | False | 14905.8 | 0 |
| 4026675 | 156101 | None | code10 | Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (P.No.41 I.No.8.1.2 BLDG SR 2023-24) | Sqm | 241.0 | 241.0 | 15.96 | False | None | None | False | None | False | 3846.36 | 0 |
| 4026676 | 156101 | None | code11 | Providing 20 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. . (P.No.41 I.No.8.3.1 BLDG SR 2023-24) | Sqm | 333.0 | 333.0 | 87.96 | False | None | None | False | None | False | 29290.68 | 0 |
| 4026677 | 156101 | None | code12 | Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uPVC solvent cement, trenching, refilling & testing of (P.No.125 I.No.13.50.2 BLDG SR 202023-24) | Mtr | 172.0 | 172.0 | 60.0 | False | None | None | False | None | False | 10320.0 | 0 |
| 4026678 | 156101 | None | code13 | Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 100 mm nominal pipes (P.No.A 125, I.No. 13.50 SR 2023-24). | Mtr | 930.0 | 930.0 | 20.0 | False | None | None | False | None | False | 18600.0 | 0 |
| 4026679 | 156101 | None | code14 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:(P.No.A 121, I.No. 14.1.1 SR 2023-24). | Each | 4884.0 | 4884.0 | 4.0 | False | None | None | False | None | False | 19536.0 | 0 |
| 4026680 | 156101 | None | code15 | Providing and fixing Bib cock with wall flange made of Stainless steelwith all concealed fitting arrangements & all necessary accesories complete - Classa Economy (P.No.:139, 1.No.14.55 of BLD SR 2023). | Each | 1117.0 | 1117.0 | 4.0 | False | None | None | False | None | False | 4468.0 | 0 |
| 4026681 | 156101 | None | code16 | Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 L/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge (P.No.45 , I.No. 8.29 SR 2023-24). | Sqm | 130.0 | 130.0 | 103.9 | False | None | None | False | None | False | 13507.0 | 0 |
| 4026682 | 156101 | None | code17 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/m2 including pointing the joints with white cement and matching pigment etc., complete.(P.No.60 , I.No. 9.9 SR 2023-24). | Sqm | 1076.0 | 1076.0 | 24.16 | False | None | None | False | None | False | 25996.16 | 0 |
| 4026683 | 156101 | None | code18 | White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps (P.No.132 , I.No. 14.7.3 SR 2023-24). | Each | 2866.0 | 2866.0 | 2.0 | False | None | None | False | None | False | 5732.0 | 0 |
| 4026684 | 156101 | None | code19 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank (P.No.134 , I.No. 13.34 SR 2023-24). | Ltr | 9.0 | 9.0 | 1000.0 | False | None | None | False | None | False | 9000.0 | 0 |
| 4026685 | 156101 | None | code20 | Concealed Conduit System Supplying heavy gauge PVC conduit pipe ……mm dia .......mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary ( 2/1.2.2)25mm dia 2mm thick | Mtr | 57.0 | 57.0 | 50.0 | False | None | None | False | None | False | 2850.0 | 0 |
| 4026686 | 156101 | None | code21 | Supplying heavy gauge PVC Conduit Pipe ….dia .......mm thick with suitable size bends, metal junction boxes adhesive paste etc.,by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering up to the wall surface and run with 18 SWG GI fish wire run through out the conduit wherever necessary.( 2/1.3.2)25mm dia 2mm thick | Mtr | 58.0 | 58.0 | 40.0 | False | None | None | False | None | False | 2320.0 | 0 |
| 4026687 | 156101 | None | code22 | Supplying and fixing PVC/Metal Conduit accessor (2/1.5.2)deep Junction box 25mm junction box | Mtr | 51.0 | 51.0 | 12.0 | False | None | None | False | None | False | 612.0 | 0 |
| 4026688 | 156101 | None | code23 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The
box should be firmly flush mounted after due groove cuttin in Brick/Stone/C.C wall (2/3.4) 8 way | Each | 140.0 | 140.0 | 2.0 | False | None | None | False | None | False | 280.0 | 0 |
| 4026689 | 156101 | None | code24 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The
box should be firmly flush mounted after due groove cuttin in Brick/Stone/C.C wall (2/3.4) 10-12 way | Each | 159.0 | 159.0 | 6.0 | False | None | None | False | None | False | 954.0 | 0 |
| 4026690 | 156101 | None | code25 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting
back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. (15/16/3.64.) 8 moudule | Each | 200.0 | 200.0 | 18.0 | False | None | None | False | None | False | 3600.0 | 0 |
| 4026691 | 156101 | None | code26 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting
back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. (15/16/3.6.6.) 12 moudule | Each | 267.0 | 267.0 | 2.0 | False | None | None | False | None | False | 534.0 | 0 |
| 4026692 | 156101 | None | code27 | Supplying and fixing of modular switch / socket/stepped electrinic fan regulater*dimmer/telephone socat etc on existing modular switch plate as per IS 3854 and IS 1293. (16/3.7.1) using Group "A" material 6Amps one way | Each | 63.0 | 63.0 | 12.0 | False | None | None | False | None | False | 756.0 | 0 |
| 4026693 | 156101 | None | code28 | Supplying and fixing of modular switch / socket/stepped electrinic fan regulater*dimmer/telephone socat etc on existing modular switch plate as per IS 3854 and IS 1293. (16/3.7.3) using Group "A" material 6Amps one way | Each | 95.0 | 95.0 | 16.0 | False | None | None | False | None | False | 1520.0 | 0 |
| 4026694 | 156101 | None | code29 | Supplying & errection of RCC rings for well steining of 0.3 Mtr Depth using M-20 grade concrete using clean graded granite or trap or jelly of approved quality 20mm and down size well compacted including centering, formwork and plastering for both faces with C.M 1:3 proportion as per design using 6.50mm M.S. coil at the rate of 10 Kgs/ring including cost of steel and fabrication, bailing out of water, errection etc., complete (RWS 2023-24 Volume No 05 It No 11.20.3 Pg No 99 | Each | 1041.0 | 1041.0 | 10.0 | False | None | None | False | None | False | 10410.0 | 0 |