| 1726744079000 | 0 | None | None | Buildings | Construction of Toilet at Government Higher Primary School (K P S D palya) in D palya Village, Gouribidanur Taluk | 363093.56 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 4030984 | 156340 | None | code01 | Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications.Mix 1:2:4 Using 20 mm nominal size graded crushed coarse aggregates & with all lead and lift. and as per direction of the Engineer in charge of work. | Cum | 6243.0 | 6243.0 | 0.92 | False | None | None | False | None | False | 5743.56 | 0 | | 4030985 | 156340 | None | code02 | Form Work for Plinth& with all lead and lift. and as per direction of the Engineer in charge of work. | Cum | 3121.0 | 3121.0 | 0.62 | False | None | None | False | None | False | 1935.02 | 0 | | 4030986 | 156340 | None | code03 | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification Buildings & with all lead and lift. and as per direction of the Engineer in charge of work. | t | 89457.0 | 89457.0 | 0.16 | False | None | None | False | None | False | 14313.12 | 0 | | 4030987 | 156340 | None | code04 | Providing Brick work with common burnt clay modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. & with all lead and lift. and as per direction of the Engineer in charge of work. | Cum | 8661.0 | 8661.0 | 11.79 | False | None | None | False | None | False | 102113.19 | 0 | | 4030988 | 156340 | None | code05 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes finsishing concrete structure in line, all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour,Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm and down size graded crushed coarseaggregates & with all lead and lift. and as per direction of the Engineer in charge of work. | Cum | 6630.0 | 6630.0 | 2.84 | False | None | None | False | None | False | 18829.2 | 0 | | 4030989 | 156340 | None | code06 | Form work for Lintel& with all lead and lift. and as per direction of the Engineer in charge of work. | Cum | 3978.0 | 3978.0 | 0.63 | False | None | None | False | None | False | 2506.14 | 0 | | 4030990 | 156340 | None | code07 | Form work for Roof& with all lead and lift. and as per direction of the Engineer in charge of work. | Cum | 3315.0 | 3315.0 | 2.2 | False | None | None | False | None | False | 7293.0 | 0 | | 4030991 | 156340 | None | code08 | Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix 1:3 (1 cement: 3 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 366.0 | 366.0 | 71.19 | False | None | None | False | None | False | 26055.54 | 0 | | 4030992 | 156340 | None | code09 | Providing 12 mm cement plaster with Cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 323.0 | 323.0 | 15.29 | False | None | None | False | None | False | 4938.67 | 0 | | 4030993 | 156340 | None | code10 | Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 371.0 | 371.0 | 38.18 | False | None | None | False | None | False | 14164.78 | 0 | | 4030994 | 156340 | None | code11 | Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment) | Kg | 148.0 | 148.0 | 140.39 | False | None | None | False | None | False | 20777.72 | 0 | | 4030995 | 156340 | None | code12 | Providing & fixing factory made PVC Door frame of size 50x47mm witha wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long brackets of 15x15mm M.S Square tube, the entire door frame to be reinforced with 19x19mm M.S Square tube of 19 gauge. The door frame to be fixed to the wall using M.S. Screws of 65/80mm size completeas per manufacturers specification & direction of Engineer-in-charge.: | Rmtr | 318.0 | 318.0 | 20.4 | False | None | None | False | None | False | 6487.2 | 0 | | 4030996 | 156340 | None | code13 | Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Prelaminated PVC C Channel of 5mm thick sheet & 30x50mm wide to form stiles & 5mm thick & 75mm wide Prelaminated PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet Prelaminated on either side fitted in the M.S. frame, Sealed to the stiles & rails with PVC Designer beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75mm Aluminium hinges.with both side prelam & with all lead and lift. and as per direction of the Engineer in charge of work. | Sqm | 2366.0 | 2366.0 | 6.3 | False | None | None | False | None | False | 14905.8 | 0 | | 4030997 | 156340 | None | code14 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 500x500 mm | Sqm | 1082.0 | 1082.0 | 54.03 | False | None | None | False | None | False | 58460.46 | 0 | | 4030998 | 156340 | None | code15 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 137.0 | 137.0 | 124.68 | False | None | None | False | None | False | 17081.16 | 0 | | 4030999 | 156340 | None | code16 | Providing & fixing White vitreous china water closet squatting pan (Indian type) along with "S" or "P" trap including dismantling of old WC seat and "S" or "P" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer in charge Orissa pattern W.C Pan of size 580 x 440 | No | 3547.0 | 3547.0 | 4.0 | False | None | None | False | None | False | 14188.0 | 0 | | 4031000 | 156340 | None | code17 | Providing and placing on terrace (at all floor levels ) polyethylene water storage tank IS 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fitting and thebase support for tank & with all lead and lift. and as per direction of the Engineer in charge of work. | l | 9.0 | 9.0 | 500.0 | False | None | None | False | None | False | 4500.0 | 0 | | 4031001 | 156340 | None | code18 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required: using White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer s& with all lead and lift. and as per direction of the Engineer in charge of work. | No | 3082.0 | 3082.0 | 1.0 | False | None | None | False | None | False | 3082.0 | 0 | | 4031002 | 156340 | None | code19 | Providing and fixing chorinated poly vinyl Chloride (CPVC) pipes conforming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this includes jointing of pipes and fittings with one step solvent cement, trenching, refilling & testing of joints complete. (external work)25mm nominal OD pipes. & with all lead and lift. and as per direction of the Engineer in charge of work. | No | 296.0 | 296.0 | 40.0 | False | None | None | False | None | False | 11840.0 | 0 | | 4031003 | 156340 | None | code20 | Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour.15 mm nominal bore with 45 cm length .& with all lead and lift. and as per direction of the Engineer in charge of work. | No | 116.0 | 116.0 | 6.0 | False | None | None | False | None | False | 696.0 | 0 | | 4031004 | 156340 | None | code21 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 & with all lead and lift. and as per direction of the Engineer in charge of work. | No | 635.0 | 635.0 | 6.0 | False | None | None | False | None | False | 3810.0 | 0 | | 4031005 | 156340 | None | code22 | Supplying and Fixing Monoblock Type-MB Series Pump Set & with all lead and lift. and as per direction of the Engineer in charge of work. | No | 6925.0 | 6925.0 | 1.0 | False | None | None | False | None | False | 6925.0 | 0 | | 4031006 | 156340 | None | code23 | Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. M.S. tube including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. & with all lead and lift. and as per direction of the Engineer in charge of work. | Kg | 136.0 | 136.0 | 18.0 | False | None | None | False | None | False | 2448.0 | 0 |
|