| 1725952212000 | 0 | None | None | Roads | Resurface of Thavarekatte - Bijjahally, Gattigundha, Kolagondanahally via Tamilnadu Border Road at Ch 11.00km to 16.00km and Construction of Box Culvert and Protection wall for rain water near Navagrama in Kanakapura Taluk | 24694330.65 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3948072 | 152897 | None | 2.5(ii) A | Clearing and Grubbing Road Land. Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, including removal and disposal of top organic soil not exceeding 150 mm in thickness-By Mechanical Means using Dozer A. In area of light jungle( I.No. 2.5(ii) A, Vol-3 Page No.9) | 100 Sqm | 408.72 | 408.72 | 270.0 | False | None | None | False | None | False | 110354.4 | 0 | | 3948073 | 152897 | None | 16.8(B) | Construction of unlined surface drains of average crosssectional area 0.40 m2 in soil to specified lines, grades, levels and dimensions. Excavated material to be used in embankment with a lift upto 3m and lead of 50 m (average lead 25 m) as per Technical Specification Clause 307.Mechanical Means. (P.144 I No. 16.8(B))Vol-3 | m | 26.0 | 26.0 | 6000.0 | False | None | None | False | None | False | 156000.0 | 0 | | 3948074 | 152897 | None | 1.7 | Construction of Embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded with desired compaction. (Royalty shall be recovered @ Rs. 60.00/m3) (Vol-1 P. no -7 / I.No.1.7) | Cum | 123.76 | 123.76 | 81.0 | False | None | None | False | None | False | 10024.56 | 0 | | 3948075 | 152897 | None | 3.5 | Scarifying the existing Bituminous road surface to a depth of 50mm and disposal of scarified material by Mechanical means using Hydraulic excavator with all lifts and lead (Vol-3 P. no -17 / I.No.3.5) | Sqm | 6.24 | 6.24 | 440.0 | False | None | None | False | None | False | 2745.6 | 0 | | 3948076 | 152897 | None | 4.1 (v) | Construction of Granular Sub-Base of required grading as per design mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401 For Grading -V Material ( I.No. 4.1 (v) Page No.23) | Cum | 2586.48 | 2586.48 | 129.6 | False | None | None | False | None | False | 335207.808 | 0 | | 3948077 | 152897 | None | 4.17 | Wet Mix Macadam (Plant Mix Method) Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver/grader in sub-base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.( I.No. 4.17 / P.No.26) | Cum | 2661.36 | 2661.36 | 259.2 | False | None | None | False | None | False | 689824.512 | 0 | | 3948078 | 152897 | None | 5.1 (i) | Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 kg/m2 using mechanical means. (Vol 3, I.No.5.1 (i) Page No 31) | Sqm | 42.64 | 42.64 | 1260.0 | False | None | None | False | None | False | 53726.4 | 0 | | 3948079 | 152897 | None | 5.32 | Tack coat on Bituminous surface
Providing and applying tack coat with VG-10 Bitumen using
pressure distributor at the rate of 0.20 kg/m2
on the prepared
bituminous surface cleaned with mechanical broom (Vol 3I.No.5.32 (i) Page No 43) | Sqm | 12.48 | 12.48 | 39210.0 | False | None | None | False | None | False | 489340.8 | 0 | | 3948080 | 152897 | None | 5.12 C | Dense Graded Bituminous Macadam Grading - I for traffic 20 MSA Providing and laying Dense Graded Bituminous Macadam with 40/60 TPH capacity hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder VG-30, at 4.0 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with mechanical paver finisher to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects. (Vol 3 I.No.5.12 C Page No 34) | Cum | 9826.96 | 9826.96 | 173.0 | False | None | None | False | None | False | 1700064.08 | 0 | | 3948081 | 152897 | None | 5.16 C | Providing and laying Bituminous Concrete with 40/60 TPH capacity hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder VG-30, @ 5.4 per cent of mix and filler, transporting the hot mix to work site, laying with mechanical paver finisher to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects (Vol 3 I.No.5.16 C Page No 38) | Cum | 11392.16 | 11392.16 | 1191.48 | False | None | None | False | None | False | 13573530.7968 | 0 | | 3948082 | 152897 | None | 3.6 | Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2 (Vol 3 P-17 / I.No.3.6) | Cum | 512.72 | 512.72 | 1110.75 | False | None | None | False | None | False | 569503.74 | 0 | | 3948083 | 152897 | None | 8.15 | Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 g/m2 area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35:2015.The finished surface to be level, uniform and free from streaks and holes. (I.no 8.15/ Page No.67, Vol-3) | Sqm | 551.2 | 551.2 | 1135.0 | False | None | None | False | None | False | 625612.0 | 0 | | 3948084 | 152897 | None | 8.43 | Supplying and Fixing of Molded Shank Raised Pavement Markers / Cat's Eye made of polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face and shall support a load of 16000 kg tested in accordance to ASTM D 4280 Type H and complying to Specifications of Category A of MORTH Circular No W/NH/33023/10-97 DO III Dt 11.06. 1997. The height, width and length shall not exceed 50 mm, 100 mm and 102 +/- 2 mm and with minimum reflective area of 13 cm2 on each side and the slope to the base shall be 35 +/- 5 degree. The strength of detachment of the integrated cylindrical shanks, (of diameter not less than 19 +/- 2 mm and height not less than 30+/- 2 mm) from the body is to be a minimum value of 500 Kg. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer's recommendation and complete as directed by the engineer.The contractor shall submit a two year warranty for satisfactory field performance including stipulated retro-reflectance of the reflecting panel, to the Engineer (I.no 8.43/ Page No.74, Vol-3) | No | 379.6 | 379.6 | 2300.0 | False | None | None | False | None | False | 873080.0 | 0 | | 3948085 | 152897 | None | 8.5 | Direction and Place Identification Signs upto 0.9 m2 Size Board. Providing and erecting direction and place identification retroreflectorised sign as per IRC:67:2022 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick or Aluminium composite material sheet with overall thickness of 4mm with area not exceeding 0.9 m2 fixed over back support frame of min 35 x 35 x 3mm angle mounted on a mild steel circular pipe 65 NB, firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 x 45 x 60 cm, 60 cm below ground level as per approved drawing . (Vol 3, I.no 8.7 /Page No. 65) | Sqm | 9370.4 | 9370.4 | 5.4 | False | None | None | False | None | False | 50600.16 | 0 | | 3948086 | 152897 | None | 8.6 A ii | Retro-Reflectorised Traffic Signs Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC:67:2022 made of Class C Type XI retro reflective sheeting fixed over 2 mm thick aluminium sheeting vide clause 801.3, 3mm/4mm thick Aluminium composite material sheet depending on the size ofthe sign fixed over the back support frame of min 25 x 25 x 3mm angle mounted on a mild steel circular pipe 65 NB, 3.2 mm thickness firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing.The sign shall be maintained as per section 12 of IRC:67:2022 90 cm equilateral triangle. (Vol 3, I.no 8.6 A ii /Page No. 64) | Each | 4937.92 | 4937.92 | 12.0 | False | None | None | False | None | False | 59255.04 | 0 | | 3948087 | 152897 | None | 8.16 ii | Kilometre Stone Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc Ordinary kilometer stone (precast). (Vol 3, I.no 8.16 ii /Page No. 67) | No | 3044.08 | 3044.08 | 4.0 | False | None | None | False | None | False | 12176.32 | 0 | | 3948088 | 152897 | None | 8.16 iii | Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc 200 m stone (precast) (Vol 3, I.no 8.16 iii /Page No. 67) | No | 875.68 | 875.68 | 20.0 | False | None | None | False | None | False | 17513.6 | 0 | | 3948089 | 152897 | None | 8.48 | Chevron Boards Supply and installation of retro- reflective Chevron signboardsof 600x450mm made out of cube corner micro prismatic grade sheeting confirming to Type XI standards of IRC:67:2022 & ASTM D 4956-09 specification & fixed over 3 mm thick Aluminium Composite Panel sheet having minimum 0.30 mm thick aluminum skin on both sides & fixed over back support frame of 25x25x 3mm MS angle frame. Supported on 75 mm dia OR 75x75x6mm Mild steel with clear height of not less than 2.1 m from the ground level to the bottom of the Sign board & 60 cm below ground level. The sign post should be painted with one coat of red oxide paint and two coats of synthetic enamel paint of black and white colour with bands of 30 cm height, firmly fixed to the ground by means of foundation with M 20 grade cement, concrete foundation size of 45 cm x 45 cm x 60 cm including cost & conveyance of all materials, equipment,machinery & Labour with all leads and lifts for satisfactorycompletion of the work as directed by Engineer incharge. (Vol 3, I.no 8.48 /Page No. 76) | Nos | 3729.44 | 3729.44 | 10.0 | False | None | None | False | None | False | 37294.4 | 0 | | 3948090 | 152897 | None | 8.17 | Road Delineators Supplying and installation of delineators (road way indicators, hazard markers, object markers), 80-100 cm high above ground level, painted black and white in 15 cm wide strips, fitted with 80 x 100 mm rectangular or 75 mm dia circular reflectorised panels at the top, buried or pressed into the ground and conforming to IRC-79-2019 and the drawings. (Vol 3, I.no 8.17 /Page No. 67) | Each | 2101.84 | 2101.84 | 20.0 | False | None | None | False | None | False | 42036.8 | 0 | | 3948091 | 152897 | None | 11.59 | Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. (Made of G.I. wire of dia. 4 mm, PVC coated to
achieve outer dia not less than 5 mm in required colour and shade) (Vol 2, I.no 11.59 /Page No. 95) | Sqm | 874.64 | 874.64 | 540.0 | False | None | None | False | None | False | 472305.6 | 0 | | 3948092 | 152897 | None | 11.57.1 | Fencing with G.I. barbed wire Angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with horizontal lines and two diagonals interwoven with horizontal wires, of barbed wire weighing 9.38 kg per 100 m (minimum), between the two posts fitted and fixed with G.I. staples, turn buckles etc. complete. (Cost of posts, struts, earth work and concrete work to be paid for separately). Payment to be made per metre cost of total length of barbed wire used With G.I. barbed wire (Vol 2, I.no 11.57.1 /Page No. 95) | m | 18.72 | 18.72 | 550.0 | False | None | None | False | None | False | 10296.0 | 0 | | 3948093 | 152897 | None | 1.14.1 | Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5mm including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. In all kinds of soils Depth upto 3 m (I.No- 1.14.1 Vol 1 Page No.8) | Cum | 106.08 | 106.08 | 834.0 | False | None | None | False | None | False | 88470.72 | 0 | | 3948094 | 152897 | None | 2.1.3 | Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates (Vol 1 I.No.2.1.3 Page No 15) | Cum | 6228.56 | 6228.56 | 75.29 | False | None | None | False | None | False | 468948.2824 | 0 | | 3948095 | 152897 | None | 2.3.2 | Providing and laying in Cement Concrete for all Basement & surface level
works, return walls, retaining walls, sunken floors etc. The granite/trap/
basalt crushed graded coarse aggregates and fine aggregates as per relevant
IS Codes machine mixed with super plasticisers, laid in layers, well compacted
using needle vibrators, providing weep holes wherever necessary, including all
lead & lifts, cost of all materials of quality, labour, Usage charges of machinery,
curing and all other appurtenances required to complete the work as per
technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (Vol 1 I.No.2.3.2 Page No 16) | Cum | 6739.2 | 6739.2 | 111.98 | False | None | None | False | None | False | 754655.616 | 0 | | 3948096 | 152897 | None | Addendum I | Addendum I - Percentage Additionalities for Formwork, Centering & Scaffolding for Box Culvert Consider 20PERC(Vol 1 Sl.NO 6 (Bridges) Page No 112) | Cum | 1347.84 | 1347.84 | 111.98 | False | None | None | False | None | False | 150931.1232 | 0 | | 3948097 | 152897 | None | 2.2.1 | Providing and laying in position Cement Concrete for all Foundation works.The granite/trap/basalt crushed graded coarse aggregates and fine aggregatesas per relevant IS Codes machine mixed with super plasticizers laid in finishedlayers, well compacted using needle vibrators, including all lead & lifts, costof all materials, quality confirming to the requirements of relevant IS codes,labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (Vol 1 I.No 2.2.1 Page No 15) | Cum | 6538.48 | 6538.48 | 151.2 | False | None | None | False | None | False | 988618.176 | 0 | | 3948098 | 152897 | None | Addendum I | Addendum I - Percentage Additionalities for Formwork, Centering & Scaffolding for Cement Concrete Drain Walls Consider 35perc(Vol 1 Sl.NO 4, Page No 112) | Cum | 2288.47 | 2288.47 | 74.4 | False | None | None | False | None | False | 170262.168 | 0 | | 3948099 | 152897 | None | 2.11 h | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification (Vol 1 I.NO 2.11 h Page No 18) | Tonne | 82171.44 | 82171.44 | 14.61 | False | None | None | False | None | False | 1200524.7384 | 0 | | 3948100 | 152897 | None | 12.1 | Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V :20H towards drawing foce. Complete as per drawing
and Technical Specifications (Vol 3 I.NO12.1 Page No 117) | m | 143.52 | 143.52 | 500.0 | False | None | None | False | None | False | 71760.0 | 0 | | 3948101 | 152897 | None | 16.8(B) | Construction of unlined surface drains of average crosssectional area 0.40 m2 in soil to specified lines, grades, levels and dimensions. Excavated material to be used in embankment with a lift upto 3m and lead of 50 m (average lead 25 m) as per Technical Specification Clause 307.Mechanical Means. (P.144 I No. 16.8(B))Vol-3 | m | 26.0 | 26.0 | 8000.0 | False | None | None | False | None | False | 208000.0 | 0 | | 3948102 | 152897 | None | 10.2 | Maintenance of Earthen Shoulder (filling with fresh soil) Making up loss of material/ irregularities on shoulder to the design level by adding fresh approved soil and compacting it with appropriate equipment( I.No. 10.2 , Vol-3 Page No.91) | Sqm | 100.88 | 100.88 | 4000.0 | False | None | None | False | None | False | 403520.0 | 0 | | 3948103 | 152897 | None | 10.3 | Maintenance of Earth Shoulder (stripping excess soil) Stripping excess soil from the shoulder surface to achieve the approved level and compacting with plate compactor( I.No. 10.3 , Vol-3 Page No.91) | Sqm | 40.56 | 40.56 | 3200.0 | False | None | None | False | None | False | 129792.0 | 0 | | 3948104 | 152897 | None | 10.5 | Filling Pot-holes and Patch Repairs with Bituminous concrete, 40mm. Removal of all failed material, trimming of completed excavation to provide firm vertical faces, cleaning of surface, painting of tack coat on the sides and base of excavation as per clause 503, back filling the pot holes with hot bituminous material as per clause 504, compacting, trimming and finishing the surface to form a smooth continuous surface, all as per clause 3004.2 ( I.No. 10.5 , Vol-3 Page No.91) | Sqm | 443.04 | 443.04 | 380.0 | False | None | None | False | None | False | 168355.2 | 0 |
|