createdTs	None
version	None
createdDate	None
modifiedDate	None
noticeInvitingTenderDTO	createdTs 1725619016666 version 4 createdDate None modifiedDate None tenderType RFQ evaluationType TWO_COVER evaluationTypeText Two Cover invitingStrategy OPEN invitingStrategyText Open taxType INCLUSIVE_TAX tenderFee 5000.00 emd 350000.00 bidValueType ITEM_WISE bidValueTypeText Item wise tenderReceiptClose 27-09-2024 16:00:00 tenderQueryClose 26-09-2024 16:00:00 technicalBidOpen 30-09-2024 16:30:00 publishedDate 20-09-2024 11:10:00 publishedByPost PWD_EE_DIV_HSPT publishedByUser KPE10057 - DEVADASA T bidValidityPeriod 90 noOfCalls 1 preBidMeetingDate 23-09-2024 11:50:43 preBidMeetingYn True preQualificationBidOpen None denominationType RUPEES denominationTypeText Rupees retenderedYn None percentageRateTypeText None contactPerson Executive Engineer splitEmdRequiredYn True emdBankGuarantee 250000.00 emdCash 100000.00 bgValidityPeriod 135 hideWeightage None multipleCurrencySelectionAllowedYn False isTechWeightageAllowed False highestBidderSelection False isVariableEmdAllowed None qcbsTenderYn None itemwiseEmdRequiredYn None sampleSubmissionDate None officeNumber 080394200231 mobileNumber None tenderSupplierList None
tenderSchedule	createdTs 1725619016702 version 9 createdDate None modifiedDate None tenderNumber PWD/2024-25/BD/WORK_INDENT11950 title CONSTRUCTION OF PRIMARY HEALTH CENTER AT THOOLAHALLI, KOTTURU TALUK, IN VIJAYANAGARA DISTRICTDMF 2023-24 description CONSTRUCTION OF PRIMARY HEALTH CENTER AT THOOLAHALLI, KOTTURU TALUK, IN VIJAYANAGARA DISTRICT DMF 2023-24 category WORKS categoryText Works ecv 23321060.59 deptName Public Works Department status PUBLISHED statusText Published remarks None csrValue None ecvtenderYn True location 1694 locationName PWD Division Office Hosapete provisionalAmount 30000000.0 groupOverheadTotal 0.0 fileNumber PWD/2024-25/BD/DMF/PHC
tenderSubEstimateList	createdTs version createdDate modifiedDate workCategoryName subEstimateName estimateTotal itemList 1725619017000 1 None None Buildings Civil works -Ground Floor 17453138.07 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3935477 152093 None CSR 2023-24 V-3 Page No 9 Item No 2.5A Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, including removal and disposal of top organic soil not exceeding 150 mm in thickness. (ii) By Mechanical Means using Dozer A. In area of light jungle 100 Sqm 412.65 412.65 15.91 False None None False None False 6565.2615 0 3935478 152093 None CSR 2023-24 V-1, Page No 8, Item No 1.12 Earth work in surface excavation by mechanical means for lowering & levelling the ground for all works other than foundation in all kinds of soils & up-to depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift up-to 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work. In all kinds of soils up-to 300 mm depth. Cum 99.75 99.75 477.3 False None None False None False 47610.675 0 3935479 152093 None CSR 2023-24V-1, Page No 8, Item No 1.14.1 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift up-to 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work. In all kinds of soils Depth up-to 3 m Cum 107.1 107.1 812.38 False None None False None False 87005.898 0 3935480 152093 None CSR 2023-24 V-1, Page No 15, Item No 2.1.3 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates. Cum 6288.45 6288.45 126.55 False None None False None False 795803.3475 0 3935481 152093 None CSR 2023-24 V-1, Page No 15, Item No 2.1.3 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates. Cum 6288.45 6288.45 22.5 False None None False None False 141490.125 0 3935482 152093 None CSR 2023-24 V-2, Page No 5, Item No 4.1 Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 l/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications. Sqm 123.9 123.9 891.0 False None None False None False 110394.9 0 3935483 152093 None CSR 2023-24 V-1, Page No 7, Item No 1.9 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up-to 1.5 m. Cum 279.3 279.3 324.95 False None None False None False 90758.535 0 3935484 152093 None CSR 2023-24 V-1, Page No 7, Item No 1.11 Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. Cum 454.65 454.65 597.15 False None None False None False 271494.2475 0 3935485 152093 None CSR 2023-24 V-1, Page No 15, Item No 2.2.3 Providing and laying in position cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 6652.8 6652.8 114.6 False None None False None False 762410.88 0 3935486 152093 None CSR 2023-24 V-1, Page No 16, Item No 2.4.3 Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. Cum 6652.8 6652.8 19.3 False None None False None False 128399.04 0 3935487 152093 None CSR 2023-24 V-1, Page No 16, Item No 2.3.2 Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS C M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. Cum 6804.0 6804.0 64.09 False None None False None False 436068.36 0 3935488 152093 None CSR 2023-24 V-1, Page No 18, Item No 2.11a Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, lapping/welding joints, tying with binding wire / soft annealed steel wire and other ancillary operations complete as per drawing and technical specification. (a. Buildings) t 93929.85 93929.85 13.18 False None None False None False 1237995.423 0 3935489 152093 None CSR 2023-24 V-1, Page No 111, Item No 1 Form Work and Centering PERCENT On Finished Rate of Concrete per CUM Foundation up-to Plinth a.Isolated 8PERCENT Cum 532.22 532.22 114.59 False None None False None False 60987.0898 0 3935490 152093 None CSR 2023-24 V-1, Page No 111, Item No 3 Form Work and CenteringPERCENT On Finished Rate of Concrete per CUM Foundation, Sub structure of Cross drainages -5 PERCENT Cum 314.42 314.42 126.51 False None None False None False 39777.2742 0 3935491 152093 None CSR 2023-24 V-1, Page No 111, Item No 9 Form Work and Centering PERCENT On Finished Rate of Concrete per CUM RCC Columns Shaft (Slip Centering)-70% Cum 4656.96 4656.96 19.31 False None None False None False 89925.8976 0 3935492 152093 None CSR 2023-24 V-1, Page No 111, Item No 2 Form Work and Centering On Finished Rate of Concrete per CUM Plinth Beams of Buildings 50 PERCENT Cum 3402.0 3402.0 30.35 False None None False None False 103250.7 0 3935493 152093 None CSR 2023-24 V-1, Page No 112, Item No 11 Form Work and Centering PERCENT On Finished Rate of Concrete per CUM Earth retaining structures -10 PERCENT Cum 680.4 680.4 33.75 False None None False None False 22963.5 0 3935494 152093 None CSR 2023-24 V-1, Page No 16, Item No 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 7185.15 7185.15 177.66 False None None False None False 1276513.749 0 3935495 152093 None CSR 2023-24 V-1, Page No 16, Item No 2.5.2) Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 7257.0 7257.0 12.76 False None None False None False 92599.32 0 3935496 152093 None CSR 2023-24 V-1, Page No 111, Item No 9 Form Work and Centering PERCENT On Finished Rate of Concrete per CUM RCC Columns / Shaft (Slip Centering)-70 PERCENT Cum 5029.61 5029.61 22.75 False None None False None False 114423.6275 0 3935497 152093 None CSR 2023-24 V-1, Page No 111, Item No 9 Form Work and Centering On Finished Rate of Concrete per CUM RCC Columns Shaft Slip Centering 70 PERCENT Cum 5079.9 5079.9 7.78 False None None False None False 39521.622 0 3935498 152093 None CSR 2023-24 V-1, Page No112, Item No14 Form Work and Centering PERCENT On Finished Rate of Concrete per CUM RCC Beams, Lintels & Troughs of Aqueducts-60 PERCENT Cum 4311.09 4311.09 50.39 False None None False None False 217235.8251 0 3935499 152093 None CSR 2023-24 V-1, Page No112, Item No14 Form Work and Centering On PERCENT Finished Rate of Concrete per CUM RCC Beams, Lintels & Troughs of Aqueducts-60 PERCENT Cum 4354.2 4354.2 2.16 False None None False None False 9405.072 0 3935500 152093 None CSR 2023-24V-1, Page No 112, Item No 16 Form Work and Centering PERCENT On Finished Rate of Concrete per CUM Staircase and other similar structures 50 PERCENT Cum 3628.5 3628.5 100.56 False None None False None False 364881.96 0 3935501 152093 None CSR 2023-24 V-1, Page No 112, Item No 16 Form Work and Centering On Finished Rate of Concrete per CUM Chejjas Canopy Other Architectural projections of minor sections 45 PERCENT Cum 3233.32 3233.32 3.81 False None None False None False 12318.9492 0 3935502 152093 None CSR 2023-24 V-1, Page No 112, Item No 16 Form Work and Centering PERCENT On Finished Rate of Concrete per CUM Chejjas, Canopy & Other Architectural projections of minor sections -45 PERCENT Cum 3265.65 3265.65 0.12 False None None False None False 391.878 0 3935503 152093 None CSR 2023-24 V-1, Page No 18, Item No 2.11a Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, lapping/welding joints, tying with binding wire / soft annealed steel wire and other ancillary operations complete as per drawing and technical specification t 93929.85 93929.85 18.67 False None None False None False 1753670.2995 0 3935504 152093 None CSR 2023-24 V-1, Page No 18, Item No 2.11a Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, lapping/welding joints, tying with binding wire / soft annealed steel wire and other ancillary operations complete as per drawing and technical specification. t 94869.15 94869.15 2.04 False None None False None False 193533.066 0 3935505 152093 None CSR 2023-24 V-2, Page No 17, Item No 6.32 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 5.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. Sqm 1375.5 1375.5 957.63 False None None False None False 1317220.065 0 3935506 152093 None CSR 2023-24 V-2, Page No 17, Item No 6.32 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 5.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. Sqm 1389.26 1389.26 196.71 False None None False None False 273281.3346 0 3935507 152093 None CSR 2023-24 V-2, Page No 17, Item No 6.34 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. Sqm 1159.2 1159.2 136.59 False None None False None False 158335.128 0 3935508 152093 None CSR 2023-24 V-2, Page No 100, ItemNo 12.13.1 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. Cum 103755.75 103755.75 0.17 False None None False None False 17638.4775 0 3935509 152093 None CSR 2023-24 V-2, Page No 105, Item No 12.57.7 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification.'-do- 40 mm thick both side Teak Sqm 5208.0 5208.0 8.64 False None None False None False 44997.12 0 3935510 152093 None CSR 2023-24 V-2, Page No 104, Item No 12.51 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications Nos 1066.8 1066.8 12.0 False None None False None False 12801.6 0 3935511 152093 None CSR 2023-24 V-2, Page No 105, Item No 12.58 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. Complete. Nos 126.0 126.0 4.0 False None None False None False 504.0 0 3935512 152093 None CSR 2023-24 V-2, Page No 105, Item No 12.59 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer having brand logo with ISI, IS 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete Nos 1169.7 1169.7 4.0 False None None False None False 4678.8 0 3935513 152093 None CSR 2023-24 V-2, Page No 105, Item No 12.60 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete Nos 1104.6 1104.6 2.0 False None None False None False 2209.2 0 3935514 152093 None CSR 2023-24 V-2, Page No 105, Item No 12.62 Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. Complete.( Nos 248.85 248.85 8.0 False None None False None False 1990.8 0 3935515 152093 None CSR 2023-24 V-2, Page No 105, Item No 12.63 Providing and fixing aluminium tower bolts, ISI marked, anodised (an- odic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. Complete Nos 136.5 136.5 8.0 False None None False None False 1092.0 0 3935516 152093 None CSR 2023-24 V-2, Page No 105, Item No 12.64 Providing and fixing PTMT door catcher of length 72 mm and dia. of 42 mm with suitable washers weighing not less than 33 gms Nos 57.75 57.75 4.0 False None None False None False 231.0 0 3935517 152093 None CSR 2023-24 V-2, Page No 107, Item No 12.75.1 Providing and fixing bright finished brass butt hinges with necessary screws etc. complete 125x85x5.5 mm (heavy type Nos 288.75 288.75 16.0 False None None False None False 4620.0 0 3935518 152093 None CSR 2023-24 V-2, Page No 107, Item No 12.76.3 Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete :150x10mm Nos 303.45 303.45 2.0 False None None False None False 606.9 0 3935519 152093 None CSR 2023-24 V-2, Page No 69, Item No 10.6.3 Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Fastener with threaded dia 12 mm Nos 63.0 63.0 8.0 False None None False None False 504.0 0 3935520 152093 None CSR 2023-24 V-2, Page No 205, Item No 20.79 Supplying and fixing new teak wood beads wherever necessary including cost of materials, labour, complete as per specifications m 54.6 54.6 16.8 False None None False None False 917.28 0 3935521 152093 None CSR 2023-24 V-2, Page No 110, Item No 12.90 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) Sqm 7070.7 7070.7 48.6 False None None False None False 343636.02 0 3935522 152093 None CSR 2023-24 V-2, Page No 110, Item No 12.90 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) Sqm 7141.41 7141.41 1.8 False None None False None False 12854.538 0 3935523 152093 None CSR 2023-24 V-2, Page No 109, Item No 12.85 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) Sqm 6004.95 6004.95 2.88 False None None False None False 17294.256 0 3935524 152093 None CSR 2023-24 V-2, Page No 104, Item No 12.54 Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long brackets of 15x15mm M.S Square tube, the entire door frame to be reinforced with 19x19mm M.S Square tube of 19 gauge. The door frame to be fixed to the wall using M.S. Screws of 65/80mm size complete as per manufacturers specification & direction of Engineer-in-charge.) m 333.9 333.9 74.1 False None None False None False 24741.99 0 3935525 152093 None CSR 2023-24 V-2, Page No 104, Item No 12.55.1) Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Prelaminated PVC C Channel of 5mm thick sheet & 30x50mm wide to form stiles & 5mm thick & 75mm wide Prelaminated PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet Prelaminated on either side fitted in the M.S. frame, Sealed to the stiles & rails with PVC Designer beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75mm Aluminium hinges.'-do- with both side prelam Sqm 2484.3 2484.3 20.48 False None None False None False 50878.464 0 3935526 152093 None CSR 2023-24 V-2, Page No 111, Item No 12.92 Providing& fixing of Openable door made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPV(Thermo Plastic Vulcanized) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the openable frame. The frame having overall size of 60mm x 55mm with GI reinforcement of 1mm thickness and openable sash with overall size of 60mm x 102mm and GI reinforcement of 2mm thickness. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 34 mm. Windows shall be provided with 6mm plain float glass, Standard hardware with 2D/3D hinge & Multi point locking system with Handle. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 1900mm x 2400mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) Sqm 6557.25 6557.25 40.95 False None None False None False 268519.3875 0 3935527 152093 None CSR 2023-24 V-2, Page No 86, Item No 11.34A Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding Kg 176.4 176.4 1081.08 False None None False None False 190702.512 0 3935528 152093 None CSR 2023-24 V-2, Page No 86, Item No 11.34A Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding Kg 178.16 178.16 37.8 False None None False None False 6734.448 0 3935529 152093 None CSR 2023-24 V-2, Page No 87, Item No 11.35.1.3 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For Fixed Portion :Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) including cost of materials, labour, usage charges of machinery complete as per specifications. Kg 523.95 523.95 37.8 False None None False None False 19805.31 0 3935530 152093 None CSR 2023-24 V-2, Page No 47, Item No 8.34.3 Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 52.5 52.5 51.48 False None None False None False 2702.7 0 3935531 152093 None CSR 2023-24 V-2, Page No 47, Item No 8.34.3 Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 53.03 53.03 1.8 False None None False None False 95.454 0 3935532 152093 None CSR 2023-24 V-2, Page No 48, Item No 8.41 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge Sqm 175.35 175.35 51.48 False None None False None False 9027.018 0 3935533 152093 None CSR 2023-24 V-2, Page No 48, Item No 8.41 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge Sqm 177.1 177.1 1.8 False None None False None False 318.78 0 3935534 152093 None CSR 2023-24 V-2, Page No 47, Item No 8.34.1 Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 55.65 55.65 8.64 False None None False None False 480.816 0 3935535 152093 None CSR 2023-24 V-2, Page No 54, Item No 8.82 Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below: 1. The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of 160/180 nos. 2. Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs. 3. On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs. 4. On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final melamine polish is applied with compressor pressure spray gun using melamine clear polish and melamine thinner mixed in required proportion complete as per direction of Engineer-in-Charge. (Final coat to be done in 1 or 2 layers without gap of time.) Sqm 710.85 710.85 8.64 False None None False None False 6141.744 0 3935536 152093 None CSR 2023-24 V-2, Page No 85, Item No 11.28 Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Kg 593.25 593.25 372.6 False None None False None False 221044.95 0 3935537 152093 None CSR 2023-24 V-2, Page No 41, Item No 8.1.1 Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 267.75 267.75 2281.29 False None None False None False 610815.3975 0 3935538 152093 None CSR 2023-24 V-2, Page No 41, Item No 8.1.1 Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 270.43 270.43 210.26 False None None False None False 56860.6118 0 3935539 152093 None CSR 2023-24 V-2, Page No 42, Item No 8.7 Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge Sqm 384.3 384.3 491.75 False None None False None False 188979.525 0 3935540 152093 None CSR 2023-24 V-2, Page No 42, Item No 8.7 Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 388.14 388.14 212.96 False None None False None False 82658.2944 0 3935541 152093 None CSR 2023-24 V-2, Page No 43, Item No 8.12 Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers including cost of material etc as per specifications and as per directions of the Engineer- in-Charge Kg 67.2 67.2 983.5 False None None False None False 66091.2 0 3935542 152093 None CSR 2023-24 V-2, Page No 43, Item No 8.12 Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers including cost of material etc as per specifications and as per directions of the Engineer- in-Charge Kg 67.87 67.87 425.92 False None None False None False 28907.1904 0 3935543 152093 None CSR 2023-24 V-2, Page No 41, Item No 8.2.1 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 309.75 309.75 187.56 False None None False None False 58096.71 0 3935544 152093 None CSR 2023-24 V-2, Page No 65, Item No 9.39 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. Sqm 1521.45 1521.45 187.56 False None None False None False 285363.162 0 3935545 152093 None CSR 2023-24 V-2, Page No 60, Item No 9.12.2 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08 and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1 4 1 cement 4 coarse sand), jointing with grey cement slurry 3.3 kgPER SQM including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm Sqm 1202.25 1202.25 304.85 False None None False None False 366505.9125 0 3935546 152093 None CSR 2023-24 V-2, Page No 60, Item No 9.11 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete. Sqm 933.45 933.45 48.2 False None None False None False 44992.29 0 3935547 152093 None CSR 2023-24 V-2, Page No 64, Item No 9.30 Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints finished with cement mortar 1:3 over existing cement concrete bed, including cost of materials, mortar, labour, curing complete as per specifications Sqm 5594.4 5594.4 243.45 False None None False None False 1361956.68 0 3935548 152093 None CSR 2023-24 V-2, Page No 69, Item No 10.1.2 Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch up, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Area of slab over 0.50 m2 Sqm 4133.85 4133.85 13.0 False None None False None False 53740.05 0 3935549 152093 None CSR 2023-24 V-2, Page No 69, Item No 10.1.2 Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch up, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Area of slab over 0.50 m2 Sqm 4175.19 4175.19 1.0 False None None False None False 4175.19 0 3935550 152093 None CSR 2023-24 V-2, Page No 69, Item No 10.2 Providing edge moulding to 18mm thick Granite stone counters, vanities etc including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge. m 344.4 344.4 5.0 False None None False None False 1722.0 0 3935551 152093 None CSR 2023-24 V-2, Page No 69, Item No 10.4 Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in Granite, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete Each 620.55 620.55 2.0 False None None False None False 1241.1 0 3935552 152093 None CSR 2023-24 V-2, Page No 63, Item No 9.29 Providing and laying flooring and steps fine dressed granite stone slabs 40 mm thick on cement mortar bed 1:6, 25 mm thick, and pointed with cement mortar 1:3 over existing cement concrete bed , including cost of materials, mortar, labour, curing complete as per specifications Sqm 4521.3 4521.3 30.0 False None None False None False 135639.0 0 3935553 152093 None CSR 2023-24 V-2, Page No 65, Item No 9.40 Providing, laying & fixing cement base, precast, pre polished cement concrete, designer tiles 25mm thick conforming to IS 1237 heavy duty tiles for flooring, treads of steps and landing, laid on a bed of 12mm thick cement mortar 1:3 mis finished with flush pointing using white cement, including cost of materials, mortar, including cutting, griding the edge to half/full round wherever required, labour, curing complete as per specification Sqm 978.6 978.6 18.5 False None None False None False 18104.1 0 3935554 152093 None CSR 2023-24 V-2, Page No 33, Item No 7.54 Providing & Fixing of Integral Densified Tegular/Butt edged Eco Friendly Lightweight Calcium Silicate Suspended Ceiling System in Module Size of 600x600x15mm with Exposed GI Plain T24 Grid for Offices, Hospitals, Institutions, Airports, Banking Sector, Auditoriums, Community halls, laboratories, Factories and All buildings in high humidity or coastal Areas. The Eco Friendly Lightweight Calcium Silicate Ceiling tiles shall be made from Non Cementitious Hydrated Calcium Silicate Slurry/ Mixture, Reinforced recycled material with fibers and natural fillers. Free from Formaldehyde and other harmful materials. Doesn't contain any toxic ingredients.The Tiles should have Humidity Resistance (RH) of 100%, Water Resistance, Non Combustible as per BS:476 Part 4, Fire Performance: as per BS 476 Part-6 for Fire Propagation, as per BS 476 Part 7 for Surface Spread of Flame, As per UK standards Fire Performace A1-S1 d0, Thermal Conductivity K 0.048 to 0.050 w/m K as per ECBC code 2007, NRC (Noise Reductions Coefficient) 0.5 to 0.75 (Semi Perforated & Fully Perforated Tiles) as per IS 8225 1987, Sound Attenuation (STA) 30 32dB,Thickness of tile should be 15mm thick with 450 kg per cum density all around on edge resting portion with Integral Densified edge and 10mm thick with 350 kgper cum density in the center of the body, Light Reflectance greater than 85percent, Weight of material is 5 to 5.5 kg/per sqm and Suitable for Green Building application with InOrganic Recycled content of 46- 50 percent out of which 18-20 perent should be FLYASH and meets the GRIHA & SVAGRIHA norms under the categories: GRIHA V.2015 criterion:11&12, GRIHA V.3 criterion: 17&29 and SVAGRIHA criterion:12 The tiles Shall be laid on 24mm Wide T Sections Flanges colour white having rotary stitching on all T sections. the Main runner with a web height of 38mm and 1200mm & 600mm Cross Tees with a web height of 32mm having thickness of 0.33mm and Wall angle of 24*24mm with 0.4 mm thickness , having load carrying capacity of 15 kg per sqm. The T sections should have Galvanizing of 120 grams per sqm and need to be installed with Suspension system. Sqm 1981.35 1981.35 411.1 False None None False None False 814532.985 0 3935555 152093 None CSR 2023-24 V-2, Page No 27, Item No 7.40.2 Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized at 120 grams per sqm, both side inclusive) consisting of main T runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross T of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main T at 600 mm center to center to form a grid of 1200x600 mm and secondary cross T of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/ making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main T runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GIadjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-chargeGI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/m2 (both sides inclusive) and 20 percent perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece Sqm 1795.5 1795.5 48.2 False None None False None False 86543.1 0 3935556 152093 None CSR 2023-24 V-2, Page No 50, Item No 8.51 Providing and applying white cement based putty o average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prerare the surface evevn and smooth complete as per specifications and as per directions of Engineer in incharge. Sqm 105.0 105.0 2896.3 False None None False None False 304111.5 0 3935557 152093 None CSR 2023-24 V-2, Page No 50, Item No 8.51 Providing and applying white cement based putty o average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prerare the surface evevn and smooth complete as per specifications and as per directions of Engineer in incharge. Sqm 106.05 106.05 228.26 False None None False None False 24206.973 0 3935558 152093 None CSR 2023-24 V-2, Page No 51, Item No 8.55.2 Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre as per specifications and as per directions of Engineer in charge. Sqm 55.65 55.65 2896.3 False None None False None False 161179.095 0 3935559 152093 None CSR 2023-24 V-2, Page No 51, Item No 8.55.2 Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre as per specifications and as per directions of Engineer in charge Sqm 56.21 56.21 228.26 False None None False None False 12830.4946 0 3935560 152093 None CSR 2023-24 V-2, Page No 50, Item No 8.54.2 Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats as per specifications and as per directions of Engineer in charge Sqm 115.5 115.5 2896.3 False None None False None False 334522.65 0 3935561 152093 None CSR 2023-24 V-2, Page No 50, Item No 8.54.2 Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats as per specifications and as per directions of Engineer in charge. Sqm 116.66 116.66 228.26 False None None False None False 26628.8116 0 3935562 152093 None CSR 2023-24 V-2, Page No 46, Item No 8.30 Finishing walls with Acrylic Smooth exterior paint of required shade New work (Two coat applied at 1.67 ltr per 10 sqm over and including priming coat of exterior primer applied at 2.20 kg per 10 sqm) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge Sqm 182.7 182.7 491.75 False None None False None False 89842.725 0 3935563 152093 None CSR 2023-24 V-2, Page No 46, Item No 8.30 Finishing walls with Acrylic Smooth exterior paint of required shade New work (Two coat applied at 1.67 ltr per 10 sqm over and including priming coat of exterior primer applied at 2.20 kg per 10 sqm) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge Sqm 184.53 184.53 212.96 False None None False None False 39297.5088 0 3935564 152093 None CSR 2023-24 V-2, Page No 149, Item No 15.1 Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace Chajjas Sunken portion of C Bathroom cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400 percent and tensile strength greater than 2 MPa as per A S T M D412. The waterproofing membrane to be applied in 2 coats at 1.6 kg per sqm to achieve final DFT Dry Film Thickness of 1 mm including prime coat of epoxy primer at 150 g per sqm and protection with 120 gsqm Geo textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification Sqm 857.85 857.85 540.0 False None None False None False 463239.0 0 3935565 152093 None CSR 2023-24 V-2, Page No 54, Item No 8.80 Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge: 20 mm to 25 mm wide to required depth m 69.3 69.3 1845.0 False None None False None False 127858.5 0 3935566 152093 None CSR 2023-24 V-2, Page No 43, Item No 8.16.1 Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanized iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. ( length of mesh only be measured for payment. Plaster Mesh( m 35.7 35.7 1845.0 False None None False None False 65866.5 0 3935567 152093 None CSR 2023-24 V-2, Page No 77, Item No 11.5.2 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using flats 30x6mm for diagonal braces and central cross piece including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge Sqm 4498.64 4498.64 2.52 False None None False None False 11336.5728 0 3935568 152093 None CSR 2021-22 V-2, Page No 44, Item No 8.16.4 Providing 12 mm thick plain cement mortar bands in cement mortar 1:4 (1 cement : 4 fine sand): Moulded Band including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge m 8.4 8.4 148.8 False None None False None False 1249.92 0 3935569 152093 None CSR 2021-22 V-2, Page No 44, Item No 8.16.4 Providing 12 mm thick plain cement mortar bands in cement mortar 1:4 (1 cement : 4 fine sand): Moulded Band including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. m 8.48 8.48 4.8 False None None False None False 40.704 0 1725619017000 1 None None Buildings WATER SUPPLY & SANITARY WORKS 619848.21 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3935570 152094 None CSR 2023-24 V-2, Page No -131, Item No -14.3.1 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid Each 6275.85 6275.85 11.0 False None None False None False 69034.35 0 3935571 152094 None CSR 2023-24 V-2, Page No -131, Item No -14.4.1 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :One urinal basin with 5 litre white P.V.C. automatic flushing cistern Urinal Basin Each 4676.7 4676.7 3.0 False None None False None False 14030.1 0 3935572 152094 None CSR 2023-24 V-2, Page No -136, Item No -14.34.1 Providing and fixing toilet paper holder : C.P. brass Each 638.4 638.4 11.0 False None None False None False 7022.4 0 3935573 152094 None CSR 2023-24 V-2, Page No -117, Item No -13.2.2 Providing and fixing brass bib cock of approved quality : 20 mm nominal bore Nos 320.25 320.25 11.0 False None None False None False 3522.75 0 3935574 152094 None CSR 2023-24 V-2, Page No -70, Item No -10.8 Providing and fixing granite stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in- charge and finished smooth. Sqm 2928.45 2928.45 2.88 False None None False None False 8433.936 0 3935575 152094 None CSR 2023-24 V-2, Page No -132, Item No -14.7.2 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap Standard Pattern WashBasin Each 2689.05 2689.05 5.0 False None None False None False 13445.25 0 3935576 152094 None CSR 2023-24 V-2, Page No -134, Item No -14.11.2) Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required : Size 600x450x200 mm Laboratory Sink Nos 5336.1 5336.1 2.0 False None None False None False 10672.2 0 3935577 152094 None CSR 2023-24-V-2, Page No -140, Item No -14.62) Providing and fixing Sink cock with swivel spout & wall flange, wall mountable made of Stainless steel with all concealed fitting arrangements & all necessary accessories complete - Class a.Economy Nos 2024.4 2024.4 2.0 False None None False None False 4048.8 0 3935578 152094 None CSR 2023-24-V-2, Page No -137, Item No -14.40.2 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g Towel Rail Each 520.8 520.8 10.0 False None None False None False 5208.0 0 3935579 152094 None CSR 2023-24 V-2, Page No -120, Item No -13.22.2) Providing and fixing PTMT grating of approved quality and colour. Rectangular type with openable circular lid Nos 212.1 212.1 21.0 False None None False None False 4454.1 0 3935580 152094 None CSR 2023-24 V-2, Page No -135, Item No -14.22A Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge. Nos 850.5 850.5 12.0 False None None False None False 10206.0 0 3935581 152094 None CSR 2023-24 V-2, Page No -136, Item No -14.32.2) Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :Rectangular shape 453x357 mm Mirror Each 1068.9 1068.9 10.0 False None None False None False 10689.0 0 3935582 152094 None CSR 2023-24 V-2, Page No -136, Item No -14.29) Providing and fixing 100 mm sand cast Iron grating for gully trap. Iron grating for gully trap Each 49.35 49.35 10.0 False None None False None False 493.5 0 3935583 152094 None CSR 2023-24 V-2, Page No -136, Item No -14.28.2.2) Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.40mm dia pipes, From wash basin waste lines m 96.6 96.6 12.0 False None None False None False 1159.2 0 3935584 152094 None CSR 2023-24 V-2, Page No -128, Item No -13.64.1) Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 75mm nominal dia pipes m 303.45 303.45 37.0 False None None False None False 11227.65 0 3935585 152094 None CSR 2023-24 V-2, Page No -128, Item No -13.64.2 Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 110Mm nominal dia pipes m 404.25 404.25 26.0 False None None False None False 10510.5 0 3935586 152094 None CSR 2023-24 V-2, Page No -125, Item No -13.48 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382,leaving 10mm gap for thermal expansion,(i)the single socketed pipes 100mm diameter m 305.55 305.55 20.0 False None None False None False 6111.0 0 3935587 152094 None CSR 2023-24 V-2, Page No -122, Item No -13.32.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot &cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.20 mm nominal dia pipes Cold Water Supply m 397.95 397.95 40.0 False None None False None False 15918.0 0 3935588 152094 None CSR 2023-24 V-2, Page No -122, Item No -13.32.3) Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot &cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc 25 mm nominal dia pipes Cold Water Supply m 500.85 500.85 43.0 False None None False None False 21536.55 0 3935589 152094 None CSR 2023-24 V-2, Page No -122, Item No -13.32.4) Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot &cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc32 mm nominal dia pipes m 584.85 584.85 6.0 False None None False None False 3509.1 0 3935590 152094 None CSR 2023-24 V-2, Page No -123, Item No 13.33.5) Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 40 mm nominal dia Pipes Cold Water Supply- Down Take m 500.85 500.85 20.0 False None None False None False 10017.0 0 3935591 152094 None CSR 2023-24 V-2, Page No -123, Item No -13.33.6) Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot &cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, TERRACE FLOOR including cutting chases and making good the walls etc40 mm nominal dia Pipes TERRACE FLOOR m 764.62 764.62 107.0 False None None False None False 81814.34 0 3935592 152094 None CSR 2023-24V-2, Page No -136, Item No -14.31) Providing and fixing 600x450 mm bevelLed edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete Bevelled Edge mirror Nos 1281.0 1281.0 5.0 False None None False None False 6405.0 0 3935593 152094 None CSR 2023-24 V-2, Page No -123, Item No -13.34) Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.TERRACE FLOOR Ltr 9.54 9.54 2000.0 False None None False None False 19080.0 0 3935594 152094 None CSR 2023-24 V-2, Page No -121, Item No -13.26) Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 g Nos 105.0 105.0 10.0 False None None False None False 1050.0 0 3935595 152094 None CSR 2023-24 V-2, Page No -117, Item No 13.5.3) Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :25 mm nominal bore TERRACE FLOOR Nos 352.09 352.09 1.0 False None None False None False 352.09 0 3935596 152094 None CSR 2023-24 V-2, Page No -118, Item No 13.6.3.1) Providing and fixing gun metal non- return valve of approved quality (screwed end) : 40 mm nominal bore Horizontal TERRACE FLOOR FROM OHT Nos 1018.08 1018.08 3.0 False None None False None False 3054.24 0 3935597 152094 None CSR 2023-24 V-5, Page No -133, Item No -11.15.5) Supply and delivery at site GM (copper alloy) gate valves confirming to Class-I as per IS 778 with latest amendments, 1 No. screwed in bonnet inside screw, rising spring spindle integral seat screwed females ends confirming to IS 554 1990 body hydraulically tested 1.5HP seat standard tested 1 HP with IS mark.For 40 mm dia GM (Copper alloy) Gate valves Nos 1590.75 1590.75 7.0 False None None False None False 11135.25 0 3935598 152094 None CSR 2023-24 V-5, Page No -133, Item No -11.15.6) Supply and delivery at site GM (copper alloy) gate valves confirming to Class-I as per IS 778 with latest amendments, 1 No. screwed in bonnet inside screw, rising spring spindle integral seat screwed females ends confirming to IS 554/ 1990 body hydraulically tested 1.5HP seat standard tested 1 HP with IS markFor50 mm dia GM (Copper alloy) Gate valves Nos 1790.12 1790.12 2.0 False None None False None False 3580.24 0 3935599 152094 None CSR 2023-24 V-5, Page No -86, Item No -7.5.1) Supplying and fixing DI/CI puddle flanges confoMing to IS 7181-1986 with latest ammendments., in position for RCC walls including hoisting and conveying them to work spot with all lead and lifts etc. complete a)For DI/CI puddle flanges of 80mm dia. Puddle Flanges No 1675.59 1675.59 2.0 False None None False None False 3351.18 0 3935600 152094 None CSR 2023-24 V-2, Page No -123, Item No -13.37) Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc, and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof. m 328.8 328.8 20.0 False None None False None False 6576.0 0 3935601 152094 None CSR 2023-24 V-5, Page No -126, Item No -16.15.1) Providing and constructing "WIRE CUT BRICK MACHINEHOLE CHAMBERS" using Portland/Pozzolana cement, conical in shape at top,with CC 1:3:6 foundation using 40mm and down size graded metal of approved quality and with an offset of 0.15M alround the chamber. Construct Brick masonry in CM 1:4, 340 mm thick, with wirecut bricks of approved quality, plaster inside and out side with CM 1:3, 12mm thick, except for the conical surface outside where the plaster thickness shall be 20mm. Slope inside to be 1:6 in the concrete towards central drain and finished smooth. Fixing of pipes in CC 1:2:4 with graded metal of 20mm and down size. Providing and fixing SFRC Machinehole frame and cover (Heavy Duty) conforming to IS:12592 with latest amendment, in CC 1:2:4.Providing and fixing footsteps made of 12mm dia. steel bars (Fe-500) with 3mm thick plastic encapsulation (IS-10910). The footsteps shall be fixed 30cms apart and on CC block embeded to masonry wall. The whole works include watering, curing, barricading, danger lighting, pouring tar over MH frame and cover, cost of tar, shoring, strutting, de-watering, engraving Machinehole number with flow direction on the inner conical surface etc. as per the drawing etc. as per technical specifications and for the following diameters and depth etc. for 1.2mm dia,Constructing Brick Masonry Circular Machinehole 1.2 m internal dia. ,1.0 M depth & SFRC cover & frame Nos 30499.35 30499.35 3.0 False None None False None False 91498.05 0 3935602 152094 None CSR 2023-24 V-2, Page No -124, Item No -13.39) Providing and fixing squre-mouth S.W gully trap class SP-1 complete with C.I grating brick masonry chamber 150 X100mm size Ptype with Non modular common burnt clay bricks of designation 3.5 & with water tight CI.cover with frame of 300x300mm size(inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design. Nos 2710.05 2710.05 10.0 False None None False None False 27100.5 0 3935603 152094 None CSR 2023-24 V-1, Page No -5, Item No -1.4.1) RAIN WATER HARVESTING Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work.In all kinds of soils Depth upto 1.5 m Cum 254.1 254.1 20.25 False None None False None False 5145.525 0 3935604 152094 None CSR 2023-24 V-1, Page No -5, Item No -1.4.2) Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work.Depth exceeding 1.5m, but not exceeding 3 m Cum 271.95 271.95 20.25 False None None False None False 5506.9875 0 3935605 152094 None CSR 2023-24 V-2, Page No -175, Item No -17.1) Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. Cum 1052.1 1052.1 10.56 False None None False None False 11110.176 0 3935606 152094 None CSR 2023-24 V-2, Page No -175, Item No -17.2) Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge Cum 1245.3 1245.3 10.56 False None None False None False 13150.368 0 3935607 152094 None CSR 2023-24 V-2, Page No -175, Item No -17.3) Supplying, filling, spreading &leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -in-charge Cum 1251.6 1251.6 10.56 False None None False None False 13216.896 0 3935608 152094 None CSR 2023-24 V-2, Page No -175, Item No -17.4) Gravel packing in tube well construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as,per direction of Engineer-in-charge Cum 1405.95 1405.95 20.72 False None None False None False 29131.284 0 3935609 152094 None CSR 2023-24 V-2, Page No -175, Item No -17.6.3) Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel screwed and socketed/plain ended casing pipes of required dia, conforming to IS: 4270,of reputed & approved make, including painted with outside surface with two coats of anticorrosive paint of approved brand and manufacture, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer- in-charge.200 mm nominal size dia having minimum wall thickness 5.40 mmEngineer-in-charge. m 1970.85 1970.85 6.0 False None None False None False 11825.1 0 3935610 152094 None CSR 2023-24 V-2, Page No -176, Item No -17.8 Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by "V" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge hr 972.3 972.3 32.0 False None None False None False 31113.6 0 3935611 152094 None CSR 2023-24 V-2, Page No -176, Item No -17.9.3) Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of:200 mm dia Each 266.7 266.7 6.0 False None None False None False 1600.2 0 3935612 152094 None CSR 2023-24 V-2, Page No -176, Item No -17.11.3) Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I).200 mm dia Each 300.3 300.3 6.0 False None None False None False 1801.8 0 1725619017000 1 None None Buildings Septic Tank with Soak pit 332034.29 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3935613 152095 None CSR 2023-24 V-3, Page No -9, Item No -2.5iiA) Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, including removal and disposal of top organic soil not exceeding 150 mm in thickness.By Mechanical Means using Dozer In area of light jungle 100 Sqm 412.65 412.65 0.17 False None None False None False 70.1505 0 3935614 152095 None CSR 2023-24 V-1, Page No 8, Item No -1.14.1)- Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work.In all kinds of soils Depth upto 3 m Cum 107.1 107.1 39.17 False None None False None False 4195.107 0 3935615 152095 None CSR 2023-24 V-1, Page No 15, Item No -2.1.3)- Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately)Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates Cum 6288.45 6288.45 1.16 False None None False None False 7294.602 0 3935616 152095 None CSR 2023-24 V-1, Page No 16, Item No -2.3.2)- Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 6804.0 6804.0 10.61 False None None False None False 72190.44 0 3935617 152095 None CSR 2023-24 V-1, Page No -112, Item No -11 Form Work and Centering Earth retaining structures-10(On Finished Rate of Concrete per CUM Cum 680.4 680.4 7.47 False None None False None False 5082.588 0 3935618 152095 None CSR 2023-24 V-1, Page No 112, Item No -15- Form Work and Centering RCC Roof Slabs (50PERCENT) ( PERCENT On Finished Rate of Concrete per CUM Cum 3402.0 3402.0 3.14 False None None False None False 10682.28 0 3935619 152095 None CSR 2023-24 V-1, Page No -18, Item No -2.11a) Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, lapping/welding joints, tying with binding wire / soft annealed steel wire and other ancillary operations complete as per drawing and technical specification. (a. Buildings) t 93929.85 93929.85 1.44 False None None False None False 135258.984 0 3935620 152095 None SR 2018-19,Item No-12.6.1 KSRB 12-6.1 : Providing 20mm square M.S footrest and fixing in manhole with M 10 cement concrete block of 20x20x10cms, using 20mm and down size metal of size including cost of materials, labour charges, curing complete as per specifications. Specification No. KBS 12.4.6 Nos 318.15 318.15 15.0 False None None False None False 4772.25 0 3935621 152095 None CSR 2023-24 V-2, Page No 150, Item No -15.5)- Providing and laying water proofing treatment to the Rafts, Below grade slab, Lift pits, water retaining structures with fully bonded High Density Polyethlene Membrane (HDPE) of 1.2mm composite thickness and having tensile strength of 25 MPa (as per ASTM D 412), elongation of 500 (as per ASTM D 412), puncture resistance of 1000N (as per ASTM E 154), peel adhesion to concrete 1200N/m (as per ASTM D 903), hydrostatic head resistance 70m (as per ASTM D 5385). The system should be fully bonded to the RCC thereby conforming to IS 16471:2017 requirements of UG waterproofing structures. The membrane should be minimum 2.4m wide to reduce the number of joints with minimum 75mm factory made selvedge’s and comprising of an HDPE layer and a pressure sensitive adhesive layer which is covered by a weather proof protective and trafficable granular layer to protect self-adhesive polymer layer, etc, including surface preparation completely as per specification & with a 10 years warranty on product & work from certified manufacturers as per the direction of the Engineer In charge Sqm 635.25 635.25 53.41 False None None False None False 33928.7025 0 3935622 152095 None CSR 2023-24 V-2, Page No 42, Item No -8.5.2)- Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 366.45 366.45 53.41 False None None False None False 19572.0945 0 3935623 152095 None CSR 2023-24 V-2, Page No 176, Item No 17.12 Providing and laying 100mm thick pre-cast cover slabs over drains & Rain pit of width not exceeding 800 mm using M20 concrete reinforced with Micro Alloyed High carbon steel with 3mm - 3ply wired steel @ 2.00 kg/m2, slabs jointed in CM 1:3 proportion and nicely finished Including providing holes in the Cover slabs wherever necessary for easy drainage of surface water including of labour, materials, scaffolding, usage of machinery, curing, lead and lift charges etc, Complete Sqm 974.4 974.4 6.37 False None None False None False 6206.928 0 3935624 152095 None CSR 2023-24 V-2, Page No 13, Item No 6.3 Providing Brick work with common burnt clay modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work Cum 9317.7 9317.7 1.6 False None None False None False 14908.32 0 3935625 152095 None CSR 2023-24 V-2, Page No 175, Item No 17.1 Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge Cum 1052.1 1052.1 5.6 False None None False None False 5891.76 0 3935626 152095 None CSR 2023-24 V-2, Page No 175, Item No 17.2 Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge Cum 1245.3 1245.3 5.6 False None None False None False 6973.68 0 3935627 152095 None CSR 2023-24 V-2, Page No 175, Item No 17.3 Supplying, filling, spreading &leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -in-charge Cum 1251.6 1251.6 4.0 False None None False None False 5006.4 0 1725619017000 1 None None Buildings Sump Tank 246297.0 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3935628 152096 None CSR 2023-24V-3, Page No 9, Item No -2.5iiA Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, including removal and disposal of top organic soil not exceeding 150 mm in thickness.By Mechanical Means using Dozer In area of light jungle 100 Sqm 412.65 412.65 0.19 False None None False None False 78.4035 0 3935629 152096 None CSR 2023-24 V-1, Page No -8, Item No -1.14.1 EXCAVATION Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work.In all kinds of soils Depth upto 3 m Cum 107.1 107.1 23.89 False None None False None False 2558.619 0 3935630 152096 None CSR 2023-24 V-1, Page No 15, Item No -2.1.3- Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately)Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates Cum 6288.45 6288.45 2.39 False None None False None False 15029.3955 0 3935631 152096 None CSR 2023-24 V-1, Page No 16, Item No -2.3.2 Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates( Cum 6804.0 6804.0 10.69 False None None False None False 72734.76 0 3935632 152096 None CSR 2023-24 V-1, Page No 112, Item No 11 Form Work and Centering Earth retaining structures-10PECENT ( %On Finished Rate of Concrete per CUM Cum 680.4 680.4 4.38 False None None False None False 2980.152 0 3935633 152096 None CSR 2023-24 V-1, Page No 112, Item No -15 Form Work and Centering RCC Roof Slabs (50%) ( % On Finished Rate of Concrete per CUM Cum 3402.0 3402.0 6.32 False None None False None False 21500.64 0 3935634 152096 None CSR 2023-24 V-1, Page No 18, Item No -2.11a- Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, lapping/welding joints, tying with binding wire / soft annealed steel wire and other ancillary operations complete as per drawing and technical specification. (a. Buildings) t 93929.85 93929.85 0.91 False None None False None False 85476.1635 0 3935635 152096 None SR 2018-19,Item No-12.6.1 KSRB 12-6.1 : Providing 20mm square M.S footrest and fixing in manhole with M 10 cement concrete block of 20x20x10cms, using 20mm and down size metal of size including cost of materials, labour charges, curing complete as per specifications. Specification No. KBS 12.4.6 Nos 318.15 318.15 3.0 False None None False None False 954.45 0 3935636 152096 None CSR 2023-24 V-2, Page No 150, Item No -15.5- Providing and laying water proofing treatment to the Rafts, Below grade slab, Lift pits, water retaining structures with fully bonded High Density Polyethlene Membrane (HDPE) of 1.2mm composite thickness and having tensile strength of 25 MPa (as per ASTM D 412), elongation of 500% (as per ASTM D 412), puncture resistance of 1000N (as per ASTM E 154), peel adhesion to concrete 1200N/m (as per ASTM D 903), hydrostatic head resistance 70m (as per ASTM D 5385). The system should be fully bonded to the RCC thereby conforming to IS 16471:2017 requirements of UG waterproofing structures. The membrane should be minimum 2.4m wide to reduce the number of joints with minimum 75mm factory made selvedge’s and comprising of an HDPE layer and a pressure sensitive adhesive layer which is covered by a weather proof protective and trafficable granular layer to protect self-adhesive polymer layer, etc, including surface preparation completely as per specification & with a 10 years warranty on product & work from certified manufacturers as per the direction of the Engineer In charge. Sqm 635.25 635.25 44.6 False None None False None False 28332.15 0 3935637 152096 None CSR 2023-24 V-2, Page No 42, Item No- 8.6.1)- Providing 12 mm cement plaster with Cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, Curing complete as per specifications and as per directions of Engineerin- Charge. Sqm 339.15 339.15 49.1 False None None False None False 16652.265 0 1725619017000 0 None None Buildings UPS WORKS 482651.4 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3935638 152097 None CSR 2023-24 V-6, Page No 38, Item No 9.3.5 Supplying, erecting, testing & commissioning of ON-LINE UPS system suitable for operation on 230V, 50Hz, A/C supply, with isolation transformer all accessories complete and Excluding batteries and wiring complete.10 kVA ON LINE UPS Each 108748.5 108748.5 2.0 False None None False None False 217497.0 0 3935639 152097 None CSR 2023-24 V-6, Page No 38, Item No 9.3.5 Supplying, installation,testing & commissioning of 12v DC, AH batteries in poly propylene container for U.P.S Low maintenance Tubular batteries.120 AH capacity Each 16572.15 16572.15 16.0 False None None False None False 265154.4 0 1725619017000 0 None None Buildings EXTERNAL ELECTRIFICATION WORKS GESCOM 639680.0 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3935640 152098 None AS PER GESCOM DATARATE External Electrification works as per Gescom Data Sheet With GST Including Rs 639680.0 639680.0 1.0 False None None False None False 639680.0 0 1725619017000 0 None None Buildings INTERNAL ELECTRIFICATION WORKS(PWD SR 2023-2024 / BESOM CSR 2023-2024) 1785732.53 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3935641 152099 None PWD SR 23-24 V-6(ITEM NO:2.2.1) POINT WIRING USING COPPER WIRE WITHOUT SWITCH Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet.(Page 5)point wiring using class A Materials.Short point upto 3 mts from tapping point to out let via switch box Point 282.45 282.45 55.0 False None None False None False 15534.75 0 3935642 152099 None PWD SR 23-24V-6(ITEM NO:2.2.2) Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet.(Page 5)point wiring using class A Materials Medium point above 3 mts upto 6mts from tapping point to outlet via switch box Point 397.95 397.95 63.0 False None None False None False 25070.85 0 3935643 152099 None PWD SR 23-24V-6(ITEM NO:2.2.3) Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet.(Page 5)point wiring using class A Materials. PWD SR 23-24V-6(ITEM NO:2.2.3) Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet.(Page 5)point wiring using class A Materials. PWD SR 23-24V-6(ITEM NO:2.2.3) Long point above 6 mts upto 10 mts from tapping point to outlet via switch box Point 582.75 582.75 76.0 False None None False None False 44289.0 0 3935644 152099 None PWD SR 23-24V-6(ITEM NO:3.4.2 3WAY Each 166.95 166.95 14.0 False None None False None False 2337.3 0 3935645 152099 None PWD SR 23-24V-6(ITEM NO:3.4.4 6WAY Each 231.0 231.0 14.0 False None None False None False 3234.0 0 3935646 152099 None PWD SR 23-24V-6(ITEM NO:3.4.5 8WAY Each 274.05 274.05 20.0 False None None False None False 5481.0 0 3935647 152099 None PWD SR 23-24V-6(ITEM NO:3.4.6 10-12WAY Each 334.95 334.95 34.0 False None None False None False 11388.3 0 3935648 152099 None PWD SR 23-24V-6(ITEM NO:3.5.2 3MODULE Each 169.05 169.05 14.0 False None None False None False 2366.7 0 3935649 152099 None PWD SR 23-24V-6(ITEM NO:3.5.4 6 MODULE Each 245.7 245.7 14.0 False None None False None False 3439.8 0 3935650 152099 None PWD SR 23-24V-6(ITEM NO:3.5.5 8 MODULE Each 298.2 298.2 20.0 False None None False None False 5964.0 0 3935651 152099 None PWD SR 23-24V-6(ITEM NO:3.5.6 10-12MODULE Each 361.2 361.2 34.0 False None None False None False 12280.8 0 3935652 152099 None PWD SR 23-24V-6(ITEM NO:3.6.1 Supplying and fixing of modular switch / socket / stepped electronic fan regulator's / dimmer / telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293 6 amps one way switch Each 107.1 107.1 289.0 False None None False None False 30951.9 0 3935653 152099 None PWD SR 23-24V-6(ITEM NO:3.6.3 6 amps 3 way switch Each 179.55 179.55 107.0 False None None False None False 19211.85 0 3935654 152099 None PWD SR 23-24V-6(ITEM NO:3.6.4 stepped fan Regulator's Each 374.85 374.85 48.0 False None None False None False 17992.8 0 3935655 152099 None PWD SR 23-24V-6(ITEM NO:3.6.10 6/16 Amps universal sockets Each 247.8 247.8 7.0 False None None False None False 1734.6 0 3935656 152099 None PWD SR 23-24V-6(ITEM NO:3.6.7 16A one way switch Each 189.0 189.0 7.0 False None None False None False 1323.0 0 3935657 152099 None PWD SR 23-24V-6(ITEM NO:3.6.9 32A DP switch Each 342.3 342.3 13.0 False None None False None False 4449.9 0 3935658 152099 None PWD SR 23-24V-6(ITEM NO:3.6.8 6A Bell push Each 185.85 185.85 2.0 False None None False None False 371.7 0 3935659 152099 None PWD SR 23-24V-6(ITEM NO:12.2.1) Supplying and fixing one of 230 V Ding dong bell and a flush type bell push with gang box fixed on necessary wooden or rawl plugs using NF screws with Remote Ding Donng bell Each 258.3 258.3 2.0 False None None False None False 516.6 0 3935660 152099 None PWD SR 23-24V-6(ITEM NO:13.12) Extra length of GI pipe of class B 19mm dia for down rod. Each 206.85 206.85 40.0 False None None False None False 8274.0 0 3935661 152099 None PWD SR 23-24V-6(ITEM NO:1.13) Supply and fixing one metal Fan box with round hook Each 122.85 122.85 48.0 False None None False None False 5896.8 0 3935662 152099 None PWD SR 23-24V-6(ITEM NO:1.2.1 Concealed Conduit System Supplying 2 mm thick heavy gauge PVC conduit pipe with suitable size bends / metal / PVC junction boxes adhesive paste etc.and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wires where ever necessary 20 mm dia 2mm thick Mtr 69.3 69.3 725.0 False None None False None False 50242.5 0 3935663 152099 None PWD SR 23-24V-6(ITEM NO:1.2.2 25 mm dia 2mm thick Mtr 81.9 81.9 550.0 False None None False None False 45045.0 0 3935664 152099 None PWD SR 23-24V-6(ITEM NO:1.2.3 32 mm dia 2.5mm thick Mtr 108.15 108.15 210.0 False None None False None False 22711.5 0 3935665 152099 None PWD SR 23-24V-6(ITEM NO:1.3.1 Groove Cutting in Wall Supplying 2 mm thick heavy gauge PVC conduit pipe with bends metal junction boxes adhesives paste etc and bracing U or J hooks and cement plastering upto the surface of the trick level and run with 18 SWG Gi fish wire run through out the conduit wherever necessary 20 mm dia 2mm thick Mtr 71.4 71.4 195.0 False None None False None False 13923.0 0 3935666 152099 None PWD SR 23-24V-6(ITEM NO:1.3.2 25 mm dia 2mm thick Mtr 82.95 82.95 260.0 False None None False None False 21567.0 0 3935667 152099 None PWD SR 23-24V-6(ITEM NO:1.3.3) 32 mm dia 2mm thick Mtr 103.95 103.95 30.0 False None None False None False 3118.5 0 3935668 152099 None PWD SR 23-24V-6(ITEM NO:1.5.1) Supplying and fixing PVC/metal conduit deep junction box 19/20mm deep junction box Each 51.45 51.45 95.0 False None None False None False 4887.75 0 3935669 152099 None PWD SR 23-24V-6(ITEM NO:1.5.2) 25mm deep junction box Each 58.8 58.8 105.0 False None None False None False 6174.0 0 3935670 152099 None PWD SR 23-24V-6(ITEM NO:1.5.3) 32mm deep junction box Each 64.05 64.05 15.0 False None None False None False 960.75 0 3935671 152099 None PWD SR 23-24V-6(ITEM NO:2.3.2) TOTAL OF POINT WIRING WIRING FOR Lighting/Power Circuits FRLS PVC insulated 1100V grade, multistrand copper with low conductor resistance single core wire in open or concealed wiring system with specified IS -694:1990 & cofirming to Latest amendments. 1.5 Sq.mm Mtr 27.3 27.3 2800.0 False None None False None False 76440.0 0 3935672 152099 None PWD SR 23-24V-6(ITEM NO:2.3.3) 2.5 sq.mm Mtr 44.1 44.1 1850.0 False None None False None False 81585.0 0 3935673 152099 None PWD SR 23-24V-6(ITEM NO:2.3.4) 4 sq.mm Mtr 66.15 66.15 550.0 False None None False None False 36382.5 0 3935674 152099 None PWD SR 23-24V-6(ITEM NO:2.3.5) 6sq.mm Mtr 96.6 96.6 175.0 False None None False None False 16905.0 0 3935675 152099 None PWD SR 23-24V-6(ITEM NO:2.3.6 10sq.mm Mtr 175.35 175.35 110.0 False None None False None False 19288.5 0 3935676 152099 None PWD SR 23-24V-6(ITEM NO:5.19.9) 12 Way TP & N Each 2445.45 2445.45 4.0 False None None False None False 9781.8 0 3935677 152099 None PWD SR 23-24V-6(ITEM NO:5.18.1) Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.6-32 A SP Each 435.75 435.75 35.0 False None None False None False 15251.25 0 3935678 152099 None PWD SR 23-24V-6(ITEM NO:5.18.5) 40 A DP Each 1113.0 1113.0 10.0 False None None False None False 11130.0 0 3935679 152099 None PWD SR 23-24V-6(ITEM NO:5.18.9) 50-63 A TPN Each 3242.4 3242.4 8.0 False None None False None False 25939.2 0 3935680 152099 None PWD SR 23-24V-6(ITEM NO:5.20.4) Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V up to 300mA sensitivity on existing wood/ panel board. 32-40Amps 2 pole Each 4786.95 4786.95 3.0 False None None False None False 14360.85 0 3935681 152099 None PWD SR 23-24V-6(ITEM NO:5.20.10) 63Amps 4 pole Each 5822.25 5822.25 2.0 False None None False None False 11644.5 0 3935682 152099 None PWD SR 23-24V-6 ITEM NO:5.17 Supplying and fixing regular MCCB distribution Panel confirming to IS/IEC 61439 - 3 and IK09 tested as per IS/IEC 62262 with minimum IP43 protection provided with Polyurethane (PUR) gasket, with suitable earthing system, on wall/wood board/flush mounting using required cl A , bolts, nuts, etc., with provision for fixing of suitable type capacity MCCB's as an incomer for 3 phase Double door with necessary bus bar completely wired to use on 440V 3phase 4 wire powder coated painting etc., complete with a provision for fixing of single/three phase suitable capacity MCB's as outgoings confirming to IS/IEC 60898 - 2, 12 Way Each 16305.45 16305.45 1.0 False None None False None False 16305.45 0 3935683 152099 None PWD SR 23-24V-6(ITEM NO 5.15.9 Supplying and fixing regular MCCB distribution Panel confirming to IS/IEC 61439 3 and IK09 tested as per IS/IEC 62262 with minimum IP43 protection provided with Polyurethane (PUR) gasket, with suitable earthing system, on wall/wood board/flush mounting using required cl A , bolts, nuts, etc., with provision for fixing of suitable type capacity MCCB's as an incomer for 3 phase Double door with necessary bus bar completely wired to use on 440V 3phase 4 wire powder coated painting etc., complete with a provision for fixing of single/three phase suitable capacity MCB's as outgoings confirming to IS/IEC 60898 2, 100 A 25 kA Each 8911.35 8911.35 1.0 False None None False None False 8911.35 0 3935684 152099 None PWD SR 23-24V-6(ITEM NO:5.5.2 Supplying of TPST with rewirable porcelain channels in SM enclosure. Made out of 14 SWG powder coated paint of approved colour. 63A Each 4407.82 4407.82 1.0 False None None False None False 4407.82 0 3935685 152099 None PWD SR 23-24V-6(ITEM NO:5.5.3 Supplying of TPST with rewirable porcelain channels in SM enclosure. Made out of 14 SWG powder coated paint of approved colour 100A Each 7949.55 7949.55 2.0 False None None False None False 15899.1 0 3935686 152099 None PWD SR 23-24V-6(ITEM NO:11.3.2 Supplying of .feet -PVC Batten with integrated LED tube .W with high quality diffuser with Life of 25000 burning hours & 70 percent lumen maintenance with CRI greater than 80. Power Input: 220-240V at 50/60Hz & Power factorgreater than 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition LED light fitting 1 x 4' - 20/22 W Each 724.5 724.5 87.0 False None None False None False 63031.5 0 3935687 152099 None PWD SR 23-24V-6(ITEM NO:11.5.3 Supply of round/square recess/surface mounted rolling type LED Down light with . W GU 10 LED Lamp Rib Fabricated from diecast aluminium with white powder coated prewired to mains connector & has swivelling unit of aluminium die cast eye ball & LED Lamp position retained by circular wire spring, with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than 80. Power Input: 220-240V at 50/60Hz & Power factor greater than 0.9 along with CE approved. 2Years Warranty against any manufacturing defect working understandard electrical condition LED square or round down light 15-18W Each 1390.2 1390.2 15.0 False None None False None False 20853.0 0 3935688 152099 None PWD SR 23-24V-6(ITEM NO:11.6.3 Supplying of recess mounting non integral type . LED w luminaire comprising of pressure decast/extruded aluminium housing, with spring loaded false ceiling clA, Power LEDs with CCT 6500 degree K, CRI greater than 70 percent. efficacy greater than 100 lumen per W, 120degree beam spread, lifegreater than 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The lamp compartment is enclosed with anti glare opal diffuser which enhances the lighting level LEDs are driven by HF electronic driver integrated in a separate control gear assembly., with PF greater than 0.95, power loss should less than 5 perecent of lamp Wage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20 percent, Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition LED modular down light 2'x2'-34-36W No 4780.65 4780.65 14.0 False None None False None False 66929.1 0 3935689 152099 None WD SR 2023-24, Chapter 11 I.No. 11.11.4 Retrofit type LED Bulb (PWD SR 2023-24, Chapter 11 I.No. 11.11.4) 9W 6500K 9W 6500K Each 161.7 161.7 12.0 False None None False None False 1940.4 0 3935690 152099 None PWD SR 23-24V-6(ITEM NO:6.1 Supplying exhaust fan of 1440 RPM of 300 mm (12") size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply Each 1566.6 1566.6 13.0 False None None False None False 20365.8 0 3935691 152099 None PWD SR 23-24V-6(ITEM NO:6.4.1 Supplying of Ceiling Fan with Capacitor rating As per guideline of BEE 5 star rating and IS:374/79 and also comply with IS: 1709/1984 with latest amendment, Rated voltage 220 V/50 Hz, Rated power input 48 W +/- 10 %, Rated current As per IS:374/79, Rated power factor 0.9 lagging(min), Rated speed 350 +/- 10% RPM, Rated air delivery 210 +/- 10% Cubic Meter Minimum, Rated service value 4.2 CMM / W, Three Blades of blade leaf 1.05 mm thick Aluminium Alloy sheet, Class B motor insulation, Bearing Two ball bearings, Top 6202, Bottom 6201, as per IS specification, Motor winding. Temp rise Shall not exceed 75 deg C over and ambient of 40 0C by resistance method at 245 V, Insulation resistance Shall not be less than Two Mega Ohms (2M Ohms), Leakage current Should not exceed 210 Micro Amp, Power input, W& current, Air Delivery & Fan Speed as per IS:374/1979 with latest amendment, 2 year manufacturer Warranty 48" Sweep 5 Star (1200 mm) Each 2810.85 2810.85 48.0 False None None False None False 134920.8 0 3935692 152099 None PWD SR 23-24V-6(ITEM NO:13.7.1) Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling rafters / girders using 23/0.0076" twin twisted PVC insulated wires, required Nos of round blocks and clA. Each 128.1 128.1 102.0 False None None False None False 13066.2 0 3935693 152099 None PWD SR 23-24V-6(ITEM NO:13.10) Fixing a ceiling / Wall mounting fan of all capacities and alltypes to the existing 'S'' hook with fan regulator to the existing board together with supplying and fixing 5 A. ceiling rose,necessary length of 23 / 0.0076 inch PVC insulated twintwisted copper wire and wiring. Each 179.55 179.55 48.0 False None None False None False 8618.4 0 3935694 152099 None PWD SR 23-24V-6(ITEM NO:13.10 Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts and 5 A. ceiling rose with sufficient length of 23/0.0076 inch PVC insulated twin core wire. Each 516.6 516.6 13.0 False None None False None False 6715.8 0 3935695 152099 None PWD SR 23-24V-6(ITEM NO:5.42.1 TOTAL OF ELECTRICAL FIXTURE CONTROL SWITCH GEARS & ACCESSORIES MAIN LT PANEL Fabricating supplying and mounting MS box made out .SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking rrangements, with suitable size clA with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour etc., complete. 14 SWG Sq CM 0.53 0.53 110000.0 False None None False None False 58300.0 0 3935696 152099 None PWD SR 23-24V-6(ITEM NO:5.40.2) Supplying . A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete 250 A 4 x 50 x 10 mm Aluminium Strips Mtr 3606.75 3606.75 7.0 False None None False None False 25247.25 0 3935697 152099 None PWD SR 23-24V-6(ITEM NO:5.41.1 Supplying and fixing angle iron frame work fabricated out of M.S. angle iron. and M.S. Flat.with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. 40 x 40 x 6 mm Mtr 320.25 320.25 16.0 False None None False None False 5124.0 0 3935698 152099 None PWD SR 23-24V-6(ITEM NO:5.18.5) Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 40 A DP Each 1113.0 1113.0 5.0 False None None False None False 5565.0 0 3935699 152099 None PWD SR 23-24V-6(ITEM NO:5.18.9 50-63 A TPN Each 3242.4 3242.4 5.0 False None None False None False 16212.0 0 3935700 152099 None PWD SR 23-24V-6(ITEM NO:5.15.9 125 A 25 KA Each 8911.35 8911.35 1.0 False None None False None False 8911.35 0 3935701 152099 None PWD SR 23-24V-6(ITEM NO:5.38) Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C. Each 540.75 540.75 3.0 False None None False None False 1622.25 0 3935702 152099 None PWD SR 23-24V-6(ITEM NO:5.22 Supplying, fixing and wiring 0 to 600V 96x96mm AC Voltmeter on existing panel/wood board Each 540.75 540.75 1.0 False None None False None False 540.75 0 3935703 152099 None PWD SR 23-24V-6(ITEM NO: 5.21 Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of percentage leakage current, programmable delay/auto/ manual reset facility suitable to mount on DIN rail/ flush mounting on panel board. Each 9717.75 9717.75 1.0 False None None False None False 9717.75 0 3935704 152099 None PWD SR 23-24V-6(ITEM NO: 5.26) Supplying, fixing and wiring 0 to 1500A CT operated AC analog type Ammeter without CT Each 504.0 504.0 3.0 False None None False None False 1512.0 0 3935705 152099 None PWD SR 23-24V-6(ITEM NO: 5.27) Supplying, fixing and wiring rotary selector switch suitable for Ammeter Each 210.0 210.0 1.0 False None None False None False 210.0 0 3935706 152099 None PWD SR 23-24V-6(ITEM NO:5.28 Supplying, fixing and wiring rotary selector switch suitable for Voltmeter Each 168.0 168.0 1.0 False None None False None False 168.0 0 3935707 152099 None PWD SR 23-24V-6(ITEM NO:5.29) Supplying, fixing and wiring 3 Phase Digital Ammeter / Voltmeter Each 1496.25 1496.25 1.0 False None None False None False 1496.25 0 3935708 152099 None PWD SR 23-24V-6(ITEM NO:2.3.2) WIRES & CABLES Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments 1.5 mm2 Mtr 27.3 27.3 60.0 False None None False None False 1638.0 0 3935709 152099 None PWD SR 23-24V-6(ITEM NO:2.3.3) Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with 2.5 mm2 specified IS-694:confirming to latest amendments. 2.5 mm2 Mtr 44.1 44.1 45.0 False None None False None False 1984.5 0 3935710 152099 None PWD SR 23-24V-6(ITEM NO:2.3.7 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with 16 mm2 specified IS-694:confirming to latest amendments. 16 mm2 Mtr 333.9 333.9 55.0 False None None False None False 18364.5 0 3935711 152099 None PWD SR 23-24V-6(ITEM NO:5.42.1) APFCR PANEL - 60 KVAR Fabricating supplying and mounting MS crcabox made outSWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clA with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour etc., complete. 14 SWG Sq CM 0.53 0.53 80000.0 False None None False None False 42400.0 0 3935712 152099 None PWD SR 23-24V-6(ITEM NO:5.39) Supplying, fixing and wiring Automatic Power Factor controller circuit unit fully, static units controlled by 14 stage microprocessor operation, relays LED display, self programming function for power stages and operating logic checking facility for healthy and efficient of each individual capacitor bank, measurement of network harmonics with indication when limit values are exceeded, Comprehensive displays with large, three phase LED display, Long term memory for settings, protection for over voltage, power factor correction fault and no voltage, to connect/ disconnect banks, with automatic recognition or with standard programs Each 22722.0 22722.0 1.0 False None None False None False 22722.0 0 3935713 152099 None PWD SR 23-24V-6(ITEM NO:5.40.2) Supplying . A rated 3Phase with Neutral bus bar arrangement using required capacity Electrolytic Al strips covered with Heat shrinkable PVC sleves mounted on Phenolic/FRP/DMC insulators which are mounted on powder coated 40x6mm MS flat frame work in existing Panel Board. The Bus bars shall have suitable holes for termination of Incoming & outgoing cables as per IS specification with necessary bolts, nuts & washers etc complete 250 A 4 x 30 x 10 mm Aluminium Strips Mtr 3606.75 3606.75 4.0 False None None False None False 14427.0 0 3935714 152099 None PWD SR 23-24V-6(ITEM NO:5.15.11 Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuit in Thermal Magnetic Release. Micro processor release shall have Earth Fault as per IS-13947. (Icu=100% lcs). In 4P MCCB, all Poles should have protection for Short-Cicrcuit/Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB. MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism THREE Pole.Incomers 160 A 25 kA Each 8911.35 8911.35 1.0 False None None False None False 8911.35 0 3935715 152099 None PWD SR 23-24V-6(ITEM NO:5.15.14)THREE Out Goings Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuit in Thermal Magnetic Release. Micro processor release shall have Earth Fault as per IS-13947. (Icu=100% lcs). In 4P MCCB, all Poles should have protection for Short-Cicrcuit/Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB. MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism 16 - 32 A TP Each 842.1 842.1 8.0 False None None False None False 6736.8 0 3935716 152099 None PWD SR 23-24V-6(ITEM NO: 5.41.1) Supplying and fixing angle iron frame work fabricated out of M.S. angle iron. and M.S. Flat.with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. 40 x 40 x 6 mm Mtr 320.25 320.25 10.0 False None None False None False 3202.5 0 3935717 152099 None PWD SR 23-24V-6(ITEM NO:5.4.2) Fixing a shunt capacitor of . kVAR capacity with necessary clA, bolts, and nuts on existing wooden or metal board including banking of more than one capacitor.6 to 10 kVAR Each 224.7 224.7 4.0 False None None False None False 898.8 0 3935718 152099 None PWD SR 23-24V-6(ITEM NO:5.4.3) 11 to 20 kVAR Each 361.2 361.2 1.0 False None None False None False 361.2 0 3935719 152099 None PWD SR 23-24V-6(ITEM NO:5.13.1) Supply and fixing of 4pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947. 25A Each 1354.5 1354.5 6.0 False None None False None False 8127.0 0 3935720 152099 None PWD SR 23-24V-6(ITEM NO:5.18.1) Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 6-32 A SP Each 435.75 435.75 3.0 False None None False None False 1307.25 0 3935721 152099 None PWD SR 23-24V-6(ITEM NO:5.38 Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C Each 540.75 540.75 3.0 False None None False None False 1622.25 0 3935722 152099 None PWD SR 23-24V-6(ITEM NO:5.34) Supplying, fixing and wiring 1000/5A to 1600/5A 15VA Burden class 1 Current Transformer Each 590.1 590.1 3.0 False None None False None False 1770.3 0 3935723 152099 None PWD SR 23-24V-6(ITEM NO:2.3.2 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest endmentsAutomatic APFCR with controller along with colling Fans and Interlocking,1.5 mm2 Mtr 27.3 27.3 40.0 False None None False None False 1092.0 0 3935724 152099 None PWD SR 23 24 V-6 ITEM NO 2.3.3 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendmentsAutomatic APFCR with controller along with colling Fans and Interlocking.2.5 mm2 Mtr 44.1 44.1 45.0 False None None False None False 1984.5 0 3935725 152099 None PWD SR 23-24V-6(ITEM NO:2.3.4) Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest mendmentsAutomatic APFCR with controller along with colling Fans and Interlocking.4 mm2 Mtr 66.15 66.15 35.0 False None None False None False 2315.25 0 3935726 152099 None PWD SR 23-24V-6(ITEM NO:2.3.4 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendmentsAutomatic APFCR with controller along with colling Fans and Interlocking. Mtr 333.9 333.9 15.0 False None None False None False 5008.5 0 3935727 152099 None PWD SR 23-24V-6 (ITEM NO:32.11 upplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVC extruded Inner sheath armoured UG LT cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness in average +5% and resistivity 14 Ohms/Kms (Max) as per IS-3975,50 Sqmm, 3.5 Core. Km 187921.65 187921.65 0.08 False None None False None False 15033.732 0 3935728 152099 None PWD SR 23-24V-6(ITEM NO:21.06 Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff(PWD SR 23-24V-6(ITEM NO:21.05)LT CABLE 35 to 95 Sqmm Km 32695.95 32695.95 0.08 False None None False None False 2615.676 0 3935729 152099 None PWD SR 23-24 V-6 Sl No.510 I.NO.63.04 P.No.28 oF81 Supplying and fixing of heavy duty cable glands suitable for UG cable of 1.1 KV class (metal only) (42/6.11),45mm dia Each 206.85 206.85 1.0 False None None False None False 206.85 0 3935730 152099 None PWD SR 23-24V-6 Sl No.459 P.No.26 of 81 INO:59.03 Heavy Duty Copper Terminal Long Barrel,50 Sqmm Copper Terminal, Apprx Wt: 17 Gm No 60.9 60.9 8.0 False None None False None False 487.2 0 3935731 152099 None PWD SR 23-24V-6(ITEM NO:12.60.1 Supplying & Fixing Chemical earthling for grounding. Conduits, IC cut-outs & other equipments backfill compound which is non-corrosive, thermally conductive, potential to permissible limits, superior Fault conduction capacity, non toxic, weather resistance & capable of achieving ohmic value less than one ohm,Using 4ft. Copper bonded rod with backfill compound. Each 4754.4 4754.4 2.0 False None None False None False 9508.8 0 3935732 152099 None PWD SR 23-24V-6(ITEM NO:5.34 Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit . The pit should be filled with equal proportion of salt and charcoal 150mm all-round the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI wire of size as per lSI specification 7.3.3. of IS 732 using 12mm dia bolts, nuts, washers and check nuts etc., the pipe shall have 16 through holes of 12 mm dia. Each 3685.5 3685.5 2.0 False None None False None False 7371.0 0 3935733 152099 None PWD SR 23-24V-6(ITEM NO:12.58.11 Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required.600x600x3mm Copper plate Each 7792.05 7792.05 2.0 False None None False None False 15584.1 0 3935734 152099 None PWD SR 23-24V-6(ITEM NO: 6.18.3 Supplying and running GI/Copper conductor for grounding and (along with other wires in conduit system of wiring) using necessary suitable size clamps, nails, guttas/spacers etc8 SWG GI Wire Mtr 19.95 19.95 60.0 False None None False None False 1197.0 0 3935735 152099 None PWD SR 23-24 V-6 ITEM NO: 6.8.5 P.No.31 of 105 Supplyingof.TRInvertortypesplitAirconditionerssuitableforoperationonA/Csupplysinglephase50Hz230Vwithhermeticallysealedinvertercompressorwithaircooledcondenser,latestR410A/R-32refrigerantfanmotor,start&runcapacitors,relay&overloadprotectorinternalunit,withoneindoor&oneoutdoorunitThecondenserunitwillbeplacedoutsidetheroomavoidnoiseincludingstandardlengthofsuitablesizecoppertubingcoveredwithnitrilerubberinsulationtube.suitablecapacity3coresheathed/PVCcopper cable and a battery operated wireless remote unit.1.5 Ton capacity Each 59151.75 59151.75 4.0 False None None False None False 236607.0 0 3935736 152099 None PWD SR 23-24 V-6 ITEM NO 6.12 P.No.32 of 105 InstallationchargesforsplittypeairconditionerwithalliedworksforoneindoorandoneoutdoorunitistobemountedonsuitableAngleIron support upto 3.0 Ton split/cassette type A/C Each 3333.75 3333.75 4.0 False None None False None False 13335.0 0 3935737 152099 None WD SR 23-24 V-6 ITEM NO 6.22 P.No.32 of 105 ExtraforFabricationsupplyandfixingofStandfabricatedusingslottedangle/Langleofsize6mmx50mmformountingoutdoor/indoor A.C. unit/ Batteries.4kVA Capacity Each 5047.35 5047.35 4.0 False None None False None False 20189.4 0 3935738 152099 None PWD SR 23-24 V-6 ITEM NO 9.1.2 P.No.38 of 105 Supplying,erecting,testingandcommissioningofvoltagestabilizersuitablefor170to270vinputandloadvariationfromnoloadtofullload,withoverloadprotection,spikesuppression,operatingat00Cto 400 C. Range etc., complete.4kVA Capacity Each 5031.6 5031.6 4.0 False None None False None False 20126.4 0 3935739 152099 None SR V-6 P.NO.45 46 OF 105 I.NO.11.8.5 LED Streetlight 120 W Each 10563.0 10563.0 6.0 False None None False None False 63378.0 0 3935740 152099 None SR V-6 P.NO. 56 OF 105I.NO.13.2.2 Using 32mm dia G.I.Pipe Each 1359.75 1359.75 6.0 False None None False None False 8158.5 0 3935741 152099 None SR V-6 P.NO.56 OF105,I.NO.13.5 Fixinghalogen/metalhalide/SVL/IL/LEDfloodlightfittingoverexistingpole/wallceilingincludingclamps,bolts,nutsandwiringusing suitable capacity wires. Each 170.1 170.1 6.0 False None None False None False 1020.6 0 1725619017000 0 None None Buildings CC Road works 1761679.09 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3935742 152100 None CSR 2023-24 V-3, Page No 9, Item No 2.5A Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, including removal and disposal of top organic soil not exceeding 150 mm in thickness. (ii) By Mechanical Means using Dozer A. In area of light jungle 100 Sqm 412.65 412.65 4.52 False None None False None False 1865.178 0 3935743 152100 None CSR 2023-24 V-1, Page No 8, Item No 1.12 Earth work in surface excavation by mechanical means for lowering & levelling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work.In all kinds of soils upto 300 mm depth Cum 99.75 99.75 135.6 False None None False None False 13526.1 0 3935744 152100 None CSR 2023-24 V-3, Page No17, Item No 305.3.4 Compacting Original Ground Compacting original ground supporting embankment Loosening, levelling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacted by rolling so as to achieve minimum dry density as given in Table 300-2 for embankment construction. Cum 110.25 110.25 135.6 False None None False None False 14949.9 0 3935745 152100 None CSR 2023-24 V-1, Page No 7, Item No 1.8 Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work Cum 497.7 497.7 135.6 False None None False None False 67488.12 0 3935746 152100 None CSR 2023-24V-3, Page No 23, Item No 4.2 Construction of Granular Sub-Base of required grading as per design spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with front end loader at OMC and compacting with vibratory roller to achieve the desired density, complete as per clause 401 Cum 2476.95 2476.95 135.6 False None None False None False 335874.42 0 3935747 152100 None CSR 2023-24 V-3, Page No 49, Item No 6.1 Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1, cement content not to be less than 150 kg/ m3, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 t vibratory roller, finishing and curing. Cum 5166.0 5166.0 67.8 False None None False None False 350254.8 0 3935748 152100 None CSR 2023-24V-3, Page No 49, Item No 6.2.1 Construction of M40 grade un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub base with Cement at 420 kg/m3, coarse and fine aggregate conforming to IS 383:2016, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design transported to site, laid with a paver finisher, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures as approved, curing compound, finishing to lines and grades as per drawing Cum 9514.05 9514.05 90.4 False None None False None False 860070.12 0 3935749 152100 None CSR 2023-24 V-3,Page No 66, Item No 8.10 Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces Sqm 114.45 114.45 16.95 False None None False None False 1939.9275 0 3935750 152100 None CSR 2023-24 V-3, Page No 123, Item No 13.14 Providing and applying 2 coats of water based cement paint to unplastered concrete surface after cleaning the surface of dirt, dust, oil, grease, efflorescence and applying paint @ of 1 litre for 2 m2 Sqm 88.2 88.2 450.0 False None None False None False 39690.0 0 3935751 152100 None CSR 2023-24 V-3, Page No 74, Item No 8.42.1 Supplying and fixing M15 grade precast cement concrete Kerb stones for Roadway, Sidewalls and gutters fixed with CM 1:3 fixed and finsihed in line as per direction of Engineer in charge. (The cost of PCC shall be paid extra) m 318.15 318.15 150.0 False None None False None False 47722.5 0 3935752 152100 None CSR 2023-24 V-1, Page No 15, Item No 2.1.3 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications.Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates Cum 6288.45 6288.45 4.5 False None None False None False 28298.025 0
generalCriterionList	createdTs version createdDate modifiedDate criterionType description tenderEligibilityCriterionDocumentList 1725619018000 0 None None ELIGIBILITY Tenders from Joint ventures are not acceptable. None 1725619018000 0 None None ELIGIBILITY Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka None 1725619018000 1 None None ELIGIBILITY EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection. None 1725619018000 0 None None ELIGIBILITY It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission. None 1725619018000 0 None None ELIGIBILITY EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection. None 1725862328000 0 None None ELIGIBILITY Bidder shall pay Contract Management Module processing fees of 0.025% of the contact value (Min Rs.500/- & Max Rs.7500/-) soon after contract has been issued to bidder. None 1725862334000 0 None None ELIGIBILITY As per Karnataka State Government order No.LD/300/LET/2006 Bangalore Dated 01.01.2007 and Government Letter No.PW/134/BMS/2007 Dated 27.7.2007, a sum amounting to 1%of the bill amount will be deducted towards Construction Labour Welfare fund. None 1725862338000 0 None None ELIGIBILITY The Item Rate quoted shall include the Royalty Charges on construction materials and other taxes as per prevailing Government Orders. None 1725862342000 0 None None ELIGIBILITY Conditional tenders will not be accepted. None 1725862349000 0 None None ELIGIBILITY The Tenderer shall obtain the workdone certificate in the prescribed format from the Competent Authority not below the rank of Executive Engineer (District Level Officer) and scan the Original Certificate and attach the scanned file to the Bid. The Original Certificate/Certificates shall be produced at the time of opening of technical Bids for physical verification. None 1725862353000 0 None None ELIGIBILITY Financial Year will be reckoned as the period between first day of April and Thirty first day of March of succeeding year(both days inclusive). None 1725862359000 0 None None ELIGIBILITY The Tenderer shall scan the Original Ownership Documents/ Lease/ Hire commitment Agreement for the Machinery and attach the scanned file to the Bid. The Original Documents shall be produced at the time of opening of technical Bids for physical verification. None 1725862367000 0 None None ELIGIBILITY The tenderer shall note that the scanned Documents can also be uploaded in the tasks created under Document/Evidence Required from the Bidder None 1725862371000 0 None None ELIGIBILITY The Employer reserves the right to Reject any or all Tenders without assigning any reason. None 1725862375000 0 None None ELIGIBILITY The Department is not responsible for any delay in accessing KPP-Portal None 1725862380000 0 None None ELIGIBILITY Tenderer shall note that the Tenders of those found Eligible as mentioned in Clause 3 - Qualification of the Tenderer in Section 2 : Instructions to Tenderers (ITT), will only be considered for evaluation. None 1725862384000 0 None None ELIGIBILITY The rates of all the items appeared in Bill of Quantities are inclusive of all leads and lifts None 1725862390000 0 None None ELIGIBILITY As per circular of Govt. of Karnataka Government Order No. PWD 107 CRM 2013, Bangalore, Dated: 20.02.2014, If the tenderer uploads the Bank Guarantee, but does not produce original at the time of technical scrutiny, such tenders will not be disqualified either in the technical bid stage or financial bid stage. But the qualified tenderer (L1) must submit the original copy of the BG at the time of agreement. None 1725862394000 0 None None ELIGIBILITY The contractor shall bound to comply the prevailing rules and regulations with regard to the EPF rules and any modifications before and after execution of agreement None 1725862399000 0 None None ELIGIBILITY After the award of the contract, the contractor has to furnish the details in respect of labour employed and the EPF details for this work in every RA bill. None 1725862405000 0 None None ELIGIBILITY The Increase in GST shall not be paid in the extended period of contract for which the contractor alone is responsible for delay as determined by the authority while granting the extension of time. None 1725862411000 0 None None ELIGIBILITY The bidder should mention the UDIN No on the turnover certificate, failing which bid is rejected. None 1725862418000 0 None None ELIGIBILITY If the bidder uploaded the false document while participating in the tender, the bidder will be responsible and action will be initiated as per the tender clause. None 1725862426000 0 None None ELIGIBILITY The star rates inrespect of specified materials ( Cement, Steel and Bitumen) shall be payable as per CIRCULAR NO.PWD 159 CRM 2009 Bangalore Dated 30.09.2010 None 1725862432000 0 None None ELIGIBILITY Financial turnover of previous years shall be given a weight of 10% per year to bring them to the price level of the 2024-25 in the Technical Qualification Criteria mentioned in the next section. None 1725862451000 0 None None ELIGIBILITY The work should be completed in 11(Eleven) Months ( including monsoon) None 1725862464000 0 None None ELIGIBILITY The earnest money deposit shall be in two parts i.e.,Part (1) Rs.1,00,000by e.payment and balance Part (2) Rs. Balance amount as specified in the KPP portal shall be in the form of Bank Guarantee in the prescribed format obtained from the Nationalized / Schedule Bank FDR or specified small savings instrument pledged to the Executive Engineer, Public Works Department Division, HOSAPETE payable at HOSAPETE before the prescribed date and time of opening of Technical Bid without fail None 1725862469000 0 None None ELIGIBILITY Any dispute or difference or claim arising out of, or in connection with, or relating to the present contract or the breach, termination or invalid thereof shall be referred and settled under the Arbitration centre Karnataka (Domastic and international Rules 2012,by one or more arbitratiors appointed in accordance with its rules None 1725862474000 0 None None ELIGIBILITY The deffect liability period is one year (1Year)from the date of actual completion of work. None 1725862478000 0 None None ELIGIBILITY 18%GST Will paid extra to the executed quantites None
preQualCriterionList	None
technicalCriterionList	createdTs version createdDate modifiedDate description criterionCategoryText criterionTypeOthersValue tenderTechnicalCriterionDocumentList None None None None Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year None None None None None None Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx) None None None None None None Total value of civl engineering works executed and payments received in the last five years (year-wise) None None None None None None List of existing commitments and ongoing works None None None None None None List of works for which tenders already submitted None None None None None None Banker Details for reference None None None None None None Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded None None None None None None Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years None None None None None None Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded None None None None None None List of Financial Resources with Certificates None None None None None None To qualify for award of this contract, each Tenderer in his name should have in the last five years i.e.,2019-20, 2020-21 2021-22,2022-23 & 2023-24 b) Executed in any one year, the following minimum quantities of work 1 Earth work /Embankment/Sub Grade/Shoulder 2036.00 Cum 2.CC/PCC/RCC/DLC 581.00Cum 3.Steel 30.10Tonnes 4.Flooring 519.00 Sqm 5.SSM/BBM/Solid bricks 210.00 Cum 6.Plastering 2790.00 7. Gsb 109.00 cum Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None To qualify for award of this contract, each Tenderer in his name should have in the last five years i.e.,2019-20, 2020-21 2021-22,2022-23 &2023-24 b) Satisfactorily completed, as prime contractor, at least one similar work such as Building Work of value not less than Rs.116.60 Lakhs Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None Registration Certificate Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None PWD Registration Certificate (Class I/II/III/IV) None None None None To qualify for award of this contract, each Tenderer in his name should have in the last five years i.e.2019-20, 2020-21 2021-22, 2022-23 &2023-24 a) Achieved in at least two financial years a minimum financial turnover (in all classes of civil engineering construction works only) of Rs. 466.42 Lakhs. Financial Status None createdTs version createdDate modifiedDate documentName None None None None Audited CA Certificate of Annual Turnover None None None None Liquid Assets and /or availability of credit facilities of no less than Rs.63.60lakhs (Credit Lines/letter of credit/ certificates from the banks for meeting the fund requirement etc., Financial Status None createdTs version createdDate modifiedDate documentName None None None None Line of Credit
tenderCriterionDocumentList	documentName optional documentTypeText Registration Certificate True Technical Bid Annual Turnover Certificate Not below the rank of Charterd Accountant,The bidder should mention the UDIN No True Technical Bid Single Work Done Certificate Not Below the rank of Executive Engineer/Work indent should be mentioned True Technical Bid Quantity Wise Work Done Certificate/Work indent should be mentioned True Technical Bid Liquid Assets True Technical Bid GST CERTIFICATE True Technical Bid Principal Place of Business. True Technical Bid Tender Bid Capacity True Technical Bid List of Existing commitments & Ongoing works- Format-5 True Technical Bid List of works for which tenders acceptence letter received-Format-6 True Technical Bid List of works for which tenders already submitted-Format-7 True Technical Bid Profit and loss ac & Balance sheets for 5 years True Technical Bid Income Tax returns for 5 years True Technical Bid
tenderWorkLocationList
tenderAddress	createdTs 1725863199000 version 0 createdDate None modifiedDate None blockNumber Office Of the Executive Engineer, PWD Division, Behind S.P Office,Dam Road, Hosapete street None city Hosapete state Karnataka pin 583201
tenderRecallDTO	None