createdTs	None
version	None
createdDate	None
modifiedDate	None
noticeInvitingTenderDTO	createdTs 1724394205626 version 5 createdDate None modifiedDate None tenderType RFQ evaluationType TWO_COVER evaluationTypeText Two Cover invitingStrategy OPEN invitingStrategyText Open taxType INCLUSIVE_TAX tenderFee 4690.00 emd 280800.00 bidValueType ITEM_WISE bidValueTypeText Item wise tenderReceiptClose 21-10-2024 16:30:00 tenderQueryClose 08-10-2024 17:30:00 technicalBidOpen 22-10-2024 17:00:00 publishedDate 20-09-2024 12:55:12 publishedByPost DUDC_EE_VJN publishedByUser KPE11860 - NAGARAJA T bidValidityPeriod 90 noOfCalls 1 preBidMeetingDate 12-09-2024 12:11:24 preBidMeetingYn True preQualificationBidOpen None denominationType RUPEES denominationTypeText Rupees retenderedYn None percentageRateTypeText None contactPerson B VEERESH AEE DUDC VIJAYANAGARA DIST splitEmdRequiredYn False emdBankGuarantee None emdCash None bgValidityPeriod None hideWeightage None multipleCurrencySelectionAllowedYn False isTechWeightageAllowed False highestBidderSelection False isVariableEmdAllowed None qcbsTenderYn None itemwiseEmdRequiredYn None sampleSubmissionDate None officeNumber 08394295655 mobileNumber 9731867295 tenderSupplierList None
tenderSchedule	createdTs 1724394205674 version 8 createdDate None modifiedDate None tenderNumber DMA/2024-25/BD/WORK_INDENT26684 title Construction of New TP office building, Construction of Toilet building and Construction of Library building at Mariyammanahalli Town Limits under NP-4 Grant description Construction of New TP office building, Construction of Toilet building and Construction of Library building at Mariyammanahalli Town Limits under NP-4 Grant category WORKS categoryText Works ecv 18720164.04 deptName Directorate of Municipal Administration status PUBLISHED statusText Published remarks None csrValue None ecvtenderYn True location 2212 locationName DMA District Urban Development Cell Vijayanagara provisionalAmount 22113000.0 groupOverheadTotal None fileNumber AMNP4MMHALLI1
tenderSubEstimateList	createdTs version createdDate modifiedDate workCategoryName subEstimateName estimateTotal itemList 1724394206000 0 None None Buildings Construction of New TP office building, Construction of Toilet building and Construction of Library building at Mariyammanahalli Town Limits under NP-4 Grant 18720164.04 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3842078 146628 None MMHB001 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the workV-1 I.No.1.14.1 P.No.8 Cum 107.1 107.1 861.3 False None None False None False 92245.23 0 3842079 146628 None MMHB002 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately)V-1 I.No.2.1.3 P.No.15 Cum 6288.45 6288.45 96.52 False None None False None False 606961.194 0 3842080 146628 None MMHB003 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregatesV-1 I.No.2.2.2 P.No.15 Cum 7185.02 7185.02 111.98 False None None False None False 804578.5396 0 3842081 146628 None MMHB004 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregateV-1 I.No.2.5.2 P.No.16 Cum 12214.75 12214.75 34.06 False None None False None False 416034.385 0 3842082 146628 None MMHB005 Plinth Beam Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregateV-1 I.No.2.5.2 P.No.16 Cum 10777.72 10777.72 27.92 False None None False None False 300913.9424 0 3842083 146628 None MMHB006 Chejjas Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregateV-1 I.No.2.5.2 P.No.16 Cum 10418.46 10418.46 1.62 False None None False None False 16877.9052 0 3842084 146628 None MMHB007 Lintels Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregateV-1 I.No.2.5.2 P.No.16 Cum 11496.24 11496.24 8.84 False None None False None False 101626.7616 0 3842085 146628 None MMHB008 Roof Beam Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregateV-1 I.No.2.5.2 P.No.16 Cum 11496.24 11496.24 31.63 False None None False None False 363626.0712 0 3842086 146628 None MMHB009 Roof Slab Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregateV-1 I.No.2.5.2 P.No.16 Cum 10777.72 10777.72 80.57 False None None False None False 868360.9004 0 3842087 146628 None MMHB010 Staircase Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregateV-1 I.No.2.5.2 P.No.16 Cum 10777.72 10777.72 4.56 False None None False None False 49146.4032 0 3842088 146628 None MMHB011 Providing Coursed rubble masonry (first sort) with hard stone in foundation and plinth with Cement mortar 1:6 (1 cement : 6 coarse sandV-2 I.No.5.2 P.No.9 Cum 6948.9 6948.9 66.62 False None None False None False 462935.718 0 3842089 146628 None MMHB012 Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)V-2 I.No.5.4 P.No.9 Cum 6708.45 6708.45 53.29 False None None False None False 357493.3005 0 3842090 146628 None MMHB013 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.V-1 I.No.1.9 P.No.7 Cum 279.3 279.3 1315.17 False None None False None False 367326.981 0 3842091 146628 None MMHB014 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. BuildingV-1 I.No.2.11a P.No.18 Tonne 93929.85 93929.85 28.91 False None None False None False 2715511.9635 0 3842092 146628 None MMHB015 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications.V-2 I.No.6.32 P.No.17 Cum 1375.5 1375.5 767.24 False None None False None False 1055338.62 0 3842093 146628 None MMHB016 Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.V-2 I.No.8.4.1 P.No.41 Sqm 339.15 339.15 480.39 False None None False None False 162924.2685 0 3842094 146628 None MMHB017 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.V-2 I.No.8.2.2 P.No.41 Sqm 292.95 292.95 1663.16 False None None False None False 487222.722 0 3842095 146628 None MMHB018 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including ounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.V-2 I.No.8.8 P.No.42 Sqm 389.55 389.55 431.19 False None None False None False 167970.0645 0 3842096 146628 None MMHB019 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge.V-2 I.No.8.25 P.No.50 Sqm 105.0 105.0 1850.64 False None None False None False 194317.2 0 3842097 146628 None MMHB020 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-chargeV-2 I.No.8.25 P.No.45 Sqm 143.85 143.85 2281.84 False None None False None False 328242.684 0 3842098 146628 None MMHB021 Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps ), but including cost of materials, labour, usage charges complete as per specifications.V-2 I.No.12.12 P.No.99 Cum 130412.1 130412.1 1.18 False None None False None False 153886.278 0 3842099 146628 None MMHB022 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications.V-2 I.No.12.51 P.No.104 Each 1066.8 1066.8 18.0 False None None False None False 19202.4 0 3842100 146628 None MMHB023 Providing and fixing in position fully panelled Mathi/Nandi wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. (excluding cost of fixtures)V-2 I.No.12.15 P.No.100 Sqm 7241.85 7241.85 48.23 False None None False None False 349274.4255 0 3842101 146628 None MMHB024 Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Prelaminated PVC C Channel of 5mm thick sheet & 30x50mm wide to form stiles & 5mm thick & 75mm wide Prelaminated PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet Prelaminated on either side fitted in the M.S. frame, Sealed to the stiles & rails with PVC Designer beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75mm Aluminium hinges.V-2 I.No.12.55.1 P.No.104 Each 2484.3 2484.3 18.0 False None None False None False 44717.4 0 3842102 146628 None MMHB025 Door Fixtures-Providing and fixing bright finished brass handles with screws etc. completeBrass handles 125 mm with plate 175x32 mmV-2 I.No.12.79.1 P.No.108 Each 261.45 261.45 32.0 False None None False None False 8366.4 0 3842103 146628 None MMHB026 Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc.125x65x2.12mmV-2 I.No.12.68 P.No.106 Each 57.75 57.75 48.0 False None None False None False 2772.0 0 3842104 146628 None MMHB027 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.V-2 I.No.12.60 P.No.105 Each 1104.6 1104.6 16.0 False None None False None False 17673.6 0 3842105 146628 None MMHB028 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. completeV-2 I.No.12.63 P.No.105 Each 136.5 136.5 32.0 False None None False None False 4368.0 0 3842106 146628 None MMHB029 PProviding & fixing of 2-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6 PHR with TPE (Thermo Plastic Elastomer) and lead free, gaskets -grey color having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 44mm width x 40mmheight with reinforcement of 1mm thickness and Sash with overall size of 27mm X 53mm with UPVC honeycomb structure inside in lieu of GI reinforcement. Coextruded Glazing bead for fixing of glass shall be of size 9.5mm x 21.5mm. Windows shall be provided with 5mm plain float glass, standard hardware& single point locking system with Crescent Locks. Wall thickness of frame & sash shall be of 2 mm.Maximum possible size 1219mm x 1219mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made)V-2 I.No.12.84 P.No.108 Sqm 5274.15 5274.15 31.5 False None None False None False 166135.725 0 3842107 146628 None MMHB030 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings / wooden frames with rawl plugs screws etc.V-2 I.No.11.34B P.No.86 Kg 192.15 192.15 402.29 False None None False None False 77300.0235 0 3842108 146628 None MMHB031 Applying priming coat: With ready mixed aluminium primer of approved brand and manufacture on resinous wood and plywood including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.V-2 I.No.8.34.2 P.No.47 Sqm 60.9 60.9 34.81 False None None False None False 2119.929 0 3842109 146628 None MMHB032 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.V-2 I.No.8.40 P.No.48 Sqm 120.75 120.75 108.99 False None None False None False 13160.5425 0 3842110 146628 None MMHB033 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 500x500 mmV-2 I.No.9.12.1 P.No.60 Sqm 1136.1 1136.1 437.98 False None None False None False 497589.078 0 3842111 146628 None MMHB034 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/m2 including pointing the joints with white cement and matching pigment etc., complete.V-2 I.No.9.11 P.No.60 Sqm 933.45 933.45 18.11 False None None False None False 16904.7795 0 3842112 146628 None MMHB035 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications.V-2 I.No.9.39 P.No.65 Sqm 1521.45 1521.45 161.14 False None None False None False 245166.453 0 3842113 146628 None MMHB036 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications.V-2 I.No.6.34 P.No.17 Sqm 1159.2 1159.2 81.0 False None None False None False 93895.2 0 3842114 146628 None MMHB037 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.V-2 I.No.11.28 P.No.85 Kg 593.25 593.25 361.6 False None None False None False 214519.2 0 3842115 146628 None MMHB038 Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material to the appropriate disposal area as per direction of Engineer-in-charge.G.S. Sheet V-2, I.No19.27.1 P.189 V-2 I.No.19.27.1 P.No.189 Sqm 114.45 114.45 70.49 False None None False None False 8067.5805 0 3842116 146628 None MMHB039 Dismantling steel work manually/ by mechanical means in built up sections without dismembering and stacking to the appropriate disposal area as per direction of Engineer-in-charge. V-2, I.No19.19 P.189V-2 I.No.19.19 P.No.189 Kgs 3.15 3.15 2534.28 False None None False None False 7982.982 0 3842117 146628 None MMHB040 Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge. V-2, I.No19.3 P.187V-2 I.No.19.3 P.No.187 Cum 2547.3 2547.3 56.18 False None None False None False 143107.314 0 3842118 146628 None MMHB041 Taking out doors, windows and clerestory window shutters (steel or wood) including stacking to the appropriate disposal area as per direction of Engineer-in-charge. Of area 3 m² and below V-2, I.No19.13.1 P.188V-2 I.No.19.13.1 P.No.188 Sqm 98.7 98.7 22.89 False None None False None False 2259.243 0 3842119 146628 None MMHB042 Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer in-charge In cement mortar V-2, I.No 19.9.2. P.187V-2 I.No.19.9.2 P.No.187 Cum 1768.2 1768.2 51.36 False None None False None False 90814.752 0 3842120 146628 None MMHB043 Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge. In cement mortar V-2, I.No 19.7.3 P.187V-2 I.No.19.7.3 P.No.187 Cum 1080.45 1080.45 34.24 False None None False None False 36994.608 0 3842121 146628 None MMHB044 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately).Mix 1:4:8 (M10) Using 40 mm nominal size graded crushed coarse aggregates (PWD Common Sr- 2023-24. Vol-1. Page no: 15,Item No: 2.1.2)V-1 I.No.2.1.2 P.No.15 Cum 6125.62 6125.62 14.05 False None None False None False 86064.961 0 3842122 146628 None MMHB045 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. .(PWD Common Sr- 2023-24. Vol-1 . Page no:15.Item No: 2.2.1)V-1 I.No.2.2.1 P.No.15 Cum 6799.39 6799.39 8.32 False None None False None False 56570.9248 0 3842123 146628 None MMHB046 Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications..(PWD Common Sr- 2023-24. Vol-1 . Page no:16.Item No: 2.4.3)V-1 I.No.2.4.3 P.No.16 Cum 11309.76 11309.76 1.72 False None None False None False 19452.7872 0 3842124 146628 None MMHB047 Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with Cement mortar 1:6 (1 cement : 6 coarse sand) :(PWD Common Sr- 2023-24. Vol-1 . Page no:9.Item No: 5.1.1)V-1 I.No.5.1.1 P.No.9 Cum 5891.55 5891.55 22.4 False None None False None False 131970.72 0 3842125 146628 None MMHB048 Refilling available Earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5 m. Including cost of all labour complete as per specifications (PWD Common Sr- 2021-22. Vol-1 . Page no: 7.Item No: 1.10)V-1 I.No.1.10 P.No.7 Cum 128.1 128.1 4.92 False None None False None False 630.252 0 3842126 146628 None MMHB049 Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications..(PWD Common Sr- 2023-24. Vol-1 . Page no:16.Item No: 2.4.3)V-1 I.No.2.4.3 P.No.16 Cum 9979.2 9979.2 4.97 False None None False None False 49596.624 0 3842127 146628 None MMHB050 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work..(PWD Common Sr- 2023-24. Vol-2 . Page no: 14,Item No: 6.8.)V-2 I.No.6.8 P.No.14 Cum 8367.45 8367.45 29.03 False None None False None False 242907.0735 0 3842128 146628 None MMHB051 Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in foundations and plinth in Cement mortar 1:4 (1cement : 4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work..(PWD Common Sr- 2023-24. Vol-2 . Page no: 14, Item No: 6.13)V-2 I.No.6.13 P.No.14 Sqm 1024.8 1024.8 28.6 False None None False None False 29309.28 0 3842129 146628 None MMHB052 Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Electric resistance or induction butt welded tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge(PWD Common Sr- 2023-24. Vol-2 . Page no: 83, Item No: 11.16.3)V-2 I.No.11.16.3 P.No.83 Kg 128.1 128.1 283.36 False None None False None False 36298.416 0 3842130 146628 None MMHB053 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 g/m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 m or as desired by Engineer in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. (PWD Common Sr- 2023-24. Vol-2 . Page no: 26, Item No: 7.38)V-2 I.No.7.38 P.No.26 Sqm 596.4 596.4 34.72 False None None False None False 20707.008 0 3842131 146628 None MMHB054 Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 g/m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :. Ridges plain (500 - 600mm) (PWD Common Sr- 2023- 24. Vol-2 . Page no: 26, Item No: 7.39.1)V-2 I.No.7.39.1 P.No.26 Rmtr 473.55 473.55 6.2 False None None False None False 2936.01 0 3842132 146628 None MMHB055 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. .Mix 1:3:6 Using 20 mm nominal size graded crushed coarse aggregates (PWD Common Sr- 2023-24. Vol-1. Page no: 15,Item No: 2.1.4)V-1 I.No.2.1.4 P.No.15 Cum 6527.85 6527.85 2.51 False None None False None False 16384.9035 0 3842133 146628 None MMHB056 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in Charge..(PWD Vol-2 Common Sr- 2023-24 .Page No:77, Item No:11.5.1)V-2 I.No.11.5.1P.No.77 Sqm 4701.9 4701.9 10.08 False None None False None False 47395.152 0 3842134 146628 None MMHB057 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding.(PWD Common Sr- 2023-24. Vol-2 .Page no: 86,Item No: 11.34A. )V-2 I.No.11.34A P.No.86 Kg 176.4 176.4 343.29 False None None False None False 60556.356 0 3842135 146628 None MMHB058 Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. M.S. tube including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.(PWD Common Sr- 2023-24. Vol-2 .Page no: 84,Item No: 11.26.1. )V-2 I.No.11.26.1P.No.84 Kg 144.9 144.9 88.32 False None None False None False 12797.568 0 3842136 146628 None MMHB059 Providing and laying Vitrified tiles with thickness 9-10 mm in floor with different sizes with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). Size of Tile 600x600 mm (PWD Vol-2 Common Sr-2023-2024.Page No:62.Item No:9.21.2)V-2 I.No.9.21.2 P.No.62 Sqm 1299.9 1299.9 36.29 False None None False None False 47173.371 0 3842137 146628 None MMHB060 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/m2 includ- ing pointing the joints with white cement and matching pigment etc., complete(PWD Vol-2 Common Sr-2021- 2022.Page No:60.Item No:9.9)V-2 I.No.9.9 P.No.60 Sqm 1129.8 1129.8 15.84 False None None False None False 17896.032 0 3842138 146628 None MMHB061 Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge(PWD Common Sr- 2023-24. Vol-2 . Page no: 45,Item No: 8.28)V-2 I.No.8.28 P.No.45 Sqm 93.45 93.45 220.12 False None None False None False 20570.214 0 3842139 146628 None MMHB062 Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5 m. Including cost of all labour complete as per specificationsV-1 I.No.1.10 Cum 168.0 168.0 19.02 False None None False None False 3195.36 0 3842140 146628 None MMHB063 Providing and fixing in position brass PUSH cock of approved quality 20mm nominal bore including cost of all materials, labour and HOM of equipments with all leads complete as per specifications. (In Hand Wash) DR No 310.8 310.8 4.0 False None None False None False 1243.2 0 3842141 146628 None MMHB064 Providing and laying 100mm thick pre-cast cover slabs over drains & Rain pit of width not exceeding 800 mm using M20 concrete reinforced with Micro Alloyed High carbon steel with 3mm - 3ply wired steel @ 2.00 kg/m2, slabs jointed in CM 1:3 proportion and nicely finished Including providing holes in the Cover slabs wherever necessary for easy drainage of surface water including of labour, materials, scaffolding, usage of machinery, curing, lead and lift charges etc, Complete.V-2 I.No.17.12 Sqm 974.4 974.4 3.54 False None None False None False 3449.376 0 3842142 146628 None MMHB065 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications.(PWD Vol-2 Common Sr- 2023-24 .Page No:100, Item No:12.13.1)V-2 I No.12.13.1 P.No 100 Cum 103755.75 103755.75 0.13 False None None False None False 13488.2475 0 3842143 146628 None MMHB066 Providing and fixing in position fully panelled Matti/Nandi wood shutters for doors with , stiles and rails of 30mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. (excluding cost of fixtures) (PWD Vol-2 Common Sr- 2023-24 .Page No:100, Item No:12.21)V-2 I No.12.21 P.No 100 Cum 6029.1 6029.1 5.04 False None None False None False 30386.664 0 3842144 146628 None MMHB067 Providing & fixing of 2.5 track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL- 16) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 81mm width x 42mmheight with reinforcement of 1mm thickness and Sash with overall size of 31mm x 57mm and mesh sash of size with GI reinforcement of 1.5mm thickness. Coextruded Glazing bead for fixing of glass shall be of size 21.5mm x 9.5mm. Windows shall be provided with 5mm plain float glass, standard hardware& single point locking system with touch lock. Wall thickness of frame & sash shall be of 1.8-2.0mm. Maximum possible size 1519mm x 1519mm (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) (PWD Vol-2 Common Sr-2023-24 .Page No:109, Item No:12.87)V-2 I No.12.87P.No 109 Sqm 6878.55 6878.55 8.63 False None None False None False 59361.8865 0 3842145 146628 None MMHB068 Providing 20 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.(PWD Common Sr- 2023-24. Vol-2 .Page no: 41,Item No: 8.3.2.)V-2 I No.8.3.2 P.No 41 Sqm 349.65 349.65 32.52 False None None False None False 11370.618 0 3842146 146628 None MMHB069 Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete.(PWD Vol-2 Common Sr-2023-2024.Page No:60.Item No:12.12.2) Size of Tile 600x600 mmV-2 I No.9.12.27 P.No 60 Sqm 1202.25 1202.25 39.13 False None None False None False 47044.0425 0 3842147 146628 None MMHB070 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(PWD Common Sr- 2023-24. Vol-2 . Page no: 48, Item No: 8.39) V-2 I No.8.39 P.No 48 Sqm 133.35 133.35 89.47 False None None False None False 11930.8245 0 3842148 146628 None MMHB071 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregateV-2 I.No.2.5.2 P.No.16 Cum 12336.9 12336.9 13.23 False None None False None False 163217.187 0 3842149 146628 None MMHB072 Chejjas Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse V-2 I.No.2.5.2 P.No.16 Cum 10522.65 10522.65 0.4 False None None False None False 4209.06 0 3842150 146628 None MMHB073 Lintels Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse V-2 I.No.2.5.2 P.No.16 Cum 11611.2 11611.2 3.98 False None None False None False 46212.576 0 3842151 146628 None MMHB074 Roof Beam Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarsV-2 I.No.2.5.2 P.No.16 Cum 11611.2 11611.2 15.7 False None None False None False 182295.84 0 3842152 146628 None MMHB075 Roof Slab Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarsV-2 I.No.2.5.2 P.No.16 Cum 10885.5 10885.5 34.44 False None None False None False 374896.62 0 3842153 146628 None MMHB076 KSRB 4.9.2 : Providing T.M.T steel reinforcement for R.C.C work including straightening, cutting, bending, hooking, placing in position, lapping and / or welding wherever required, tying with binding wire and anchoring to the adjoining members wherever necessary complete as per design (laps, hooks and wastage shall not be measured and paid) cost of materials, labour, HOM of machinery complete as per specifications. Specification No. KBS 4.6.3 - TMT bars Fe 500V-1 I.No.2.11a P.No.18 Tonne 94869.14 94869.14 11.14 False None None False None False 1056842.2196 0 3842154 146628 None MMHB077 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications.V-2 I.No.6.32 P.No.17 Cum 1389.25 1389.25 349.37 False None None False None False 485362.2725 0 3842155 146628 None MMHB078 KSRB15-3-13 : Providing 12mm thick cement plaster in single coat with cement mortar 1:3, to ceiling including rounding off corners wherever required smooth rendering, : Providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications.V-2 I.No.8.4.1 P.No.41 Sqm 342.54 342.54 251.14 False None None False None False 86025.4956 0 3842156 146628 None MMHB079 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.V-2 I.No.8.2.2 P.No.41 Sqm 295.87 295.87 637.05 False None None False None False 188483.9835 0 3842157 146628 None MMHB080 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including ounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.V-2 I.No.8.8 P.No.42 Sqm 393.44 393.44 559.68 False None None False None False 220200.4992 0 3842158 146628 None MMHB081 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge.V-2 I.No.8.51 P.No.50 Sqm 106.05 106.05 888.2 False None None False None False 94193.61 0 3842159 146628 None MMHB082 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-chargeV-2 I.No.8.25 P.No.45 Sqm 145.28 145.28 1447.88 False None None False None False 210348.0064 0 3842160 146628 None MMHB083 Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps ), but including cost of materials, labour, usage charges complete as per specifications.V-2 I.No.12.12 P.No.99 Cum 131716.22 131716.22 0.21 False None None False None False 27660.4062 0 3842161 146628 None MMHB084 KSRB 9-27.1 : Fixing of door frame in an existing opening including embeeding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debries with lead upto 50 m. including cost of materials, labour charges, complete as per specifications.V-2 I.No.12.51 P.No.104 Nos 1077.46 1077.46 3.0 False None None False None False 3232.38 0 3842162 146628 None MMHB085 Providing and fixing in position fully panelled Mathi/Nandi wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. (excluding cost of fixtures)V-2 I.No.12.15 P.No.100 Sqm 7314.26 7314.26 8.64 False None None False None False 63195.2064 0 3842163 146628 None MMHB086 Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Prelaminated PVC C Channel of 5mm thick sheet & 30x50mm wide to form stiles & 5mm thick & 75mm wide Prelaminated PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet Prelaminated on either side fitted in the M.S. frame, Sealed to the stiles & rails with PVC Designer beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75mm Aluminium hinges.V-2 I.No.12.55.1 P.No.104 Sqm 2509.14 2509.14 12.59 False None None False None False 31590.0726 0 3842164 146628 None MMHB087 Door Fixtures-Providing and fixing bright finished brass handles with screws etc. completeBrass handles 125 mm with plate 175x32 mmV-2 I.No.12.79.1 P.No.108 Nos 264.06 264.06 6.0 False None None False None False 1584.36 0 3842165 146628 None MMHB088 Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc.125x65x2.12mmV-2 I.No.12.68 P.No.106 Nos 58.32 58.32 9.0 False None None False None False 524.88 0 3842166 146628 None MMHB089 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.V-2 I.No.12.60P.No.105 Nos 1115.64 1115.64 3.0 False None None False None False 3346.92 0 3842167 146628 None MMHB090 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. completeV-2 I.No.12.63 P.No.105 Nos 137.86 137.86 6.0 False None None False None False 827.16 0 3842168 146628 None MMHB091 Providing & fixing of 2-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6 PHR with TPE (Thermo Plastic Elastomer) and lead free, gaskets -grey color having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 44mm width x 40mmheight with reinforcement of 1mm thickness and Sash with overall size of 27mm X 53mm with UPVC honeycomb structure inside in lieu of GI reinforcement. Coextruded Glazing bead for fixing of glass shall be of size 9.5mm x 21.5mm. Windows shall be provided with 5mm plain float glass, standard hardware& single point locking system with Crescent Locks. Wall thickness of frame & sash shall be of 2 mm.Maximum possible size 1219mm x 1219mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made)V-2 I.No.12.84 P.No.108 Sqm 5326.89 5326.89 22.5 False None None False None False 119855.025 0 3842169 146628 None MMHB092 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings / wooden frames with rawl plugs screws etc.V-2 I.No.11.34B P.No.86 Kgs 194.07 194.07 274.86 False None None False None False 53342.0802 0 3842170 146628 None MMHB093 Applying priming coat: With ready mixed aluminium primer of approved brand and manufacture on resinous wood and plywood including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.V-2 I.No.8.34.2 P.No.47 Sqm 61.5 61.5 6.43 False None None False None False 395.445 0 3842171 146628 None MMHB094 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.V-2 I.No.8.40 P.No.48 Sqm 121.95 121.95 29.34 False None None False None False 3578.013 0 3842172 146628 None MMHB095 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 500x500 mmV-2 I.No.9.12.1 P.No.60 Sqm 1147.46 1147.46 251.14 False None None False None False 288173.1044 0 3842173 146628 None MMHB096 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/m2 including pointing the joints with white cement and matching pigment etc., complete.V-2 I.No.9.11 P.No.60 Sqm 942.78 942.78 12.64 False None None False None False 11916.7392 0 3842174 146628 None MMHB097 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications.V-2 I.No.9.39 P.No.65 Sqm 1536.66 1536.66 74.78 False None None False None False 114911.4348 0 3842175 146628 None MMHB098 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications.V-2 I.No.6.34 P.No.17 Sqm 1170.79 1170.79 190.85 False None None False None False 223445.2715 0 3842176 146628 None MMHB099 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.V-2 I.No.11.28 P.No.85 Kg 599.18 599.18 165.96 False None None False None False 99439.9128 0 3842177 146628 None MMHB100 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work - 25 mm nominal dia PipesV-2 I.No.13.33.3 P.No.122 Mtr 310.8 310.8 90.0 False None None False None False 27972.0 0 3842178 146628 None MMHB101 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work - 32 mm nominal dia PipesV-2 I.No.13.33.4 P.No.122 Mtr 390.6 390.6 20.0 False None None False None False 7812.0 0 3842179 146628 None MMHB102 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work - 40 mm nominal dia PipesV-2 I.No.13.33.5 P.No.123 Mtr 500.85 500.85 122.0 False None None False None False 61103.7 0 3842180 146628 None MMHB103 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work - 40 mm nominal dia PipesV-2 I.No.13.33.2 P.No.123 Mtr 397.95 397.95 20.0 False None None False None False 7959.0 0 3842181 146628 None MMHB104 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work - 20 mm nominal dia PipesV-2 I.No.13.33.2 P.No.122 Mtr 227.85 227.85 60.0 False None None False None False 13671.0 0 3842182 146628 None MMHB105 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work - 25 mm nominal dia PipesV-2 I.No.13.33.3 P.No.122 Mtr 310.8 310.8 50.0 False None None False None False 15540.0 0 3842183 146628 None MMHB106 Providing and placing on terrace, (at all floor levels) polyethylene water storage tanks IS : 12701 marked with cover and suitable locking arrangements, and making necessary holes for inlet, outlet and over flow pipes, but without fittings and the base support for tankV-2 I.No.13.34 P.No.123 Ltr 9.45 9.45 5000.0 False None None False None False 47250.0 0 3842184 146628 None MMHB107 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.V-2 I.No.13.15 P.No.119 Each 761.25 761.25 24.0 False None None False None False 18270.0 0 3842185 146628 None MMHB108 Providing and fixing brass bib cock of approved quality 20 mm nominal boreV-2 I.No.13.2.2 P.No.117 Each 320.25 320.25 24.0 False None None False None False 7686.0 0 3842186 146628 None MMHB109 Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) :40 mm nominal boreV-2 I.No.13.4.3 P.No.117 Each 737.1 737.1 4.0 False None None False None False 2948.4 0 3842187 146628 None MMHB110 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gV-2 I.No.14.40.2 P.No.137 Each 520.8 520.8 18.0 False None None False None False 9374.4 0 3842188 146628 None MMHB111 Rectangular shape 453x357 mm Mirror with Plastic moulded frameV-2 SI.No.711 P.No.A-33 Unit 304.5 304.5 18.0 False None None False None False 5481.0 0 3842189 146628 None MMHB112 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Angle back wash basin size 600 x 480 mm with single 15mm C.P. brass pillar tapV-2 I.No.14.7.5 P.No.132 Unit 2689.05 2689.05 2.0 False None None False None False 5378.1 0 3842190 146628 None MMHB113 Providing and fixing white vitreous china pedestal type water closet(European type) with seat and lid, 10 litre low level white vitreous chinaflushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mmflush bend, overflow arrangement with specials of standard make andmosquito proof coupling of approved municipal design complete,including painting of fittings and brackets, cutting and making goodthe walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lidV-2 I.No.14.3.1 P.No.131 Pan 6275.85 6275.85 15.0 False None None False None False 94137.75 0 3842191 146628 None MMHB114 Providing and fixing 100 mm sand cast Iron grating for gully trapV-2 I.No.14.29 P.No.136 Nos 49.35 49.35 20.0 False None None False None False 987.0 0 3842192 146628 None MMHB115 Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required :Single half stall urinal with 5 litre P.V.C. automatic flushing cisternV-2 I.No.14.5.1 P.No.132 Each 9074.1 9074.1 8.0 False None None False None False 72592.8 0 3842193 146628 None MMHB116 Providing and fixing granite stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in- charge and finished smooth.V-2 I.No.10.8 P.No.70 Sqm 2928.45 2928.45 5.4 False None None False None False 15813.63 0 3842194 146628 None MMHB117 Prvoviding and fixing unplasticied PVC connection pipe with brass union 30cm length 15mm nominal bore Set 87.15 87.15 4.0 False None None False None False 348.6 0 3842195 146628 None MMHB118 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked black solid plastic seat and lidV-2 I.No.14.2.2 Pan 5076.75 5076.75 4.0 False None None False None False 20307.0 0 3842196 146628 None MMHB119 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Flat back wash basin size 450x 300 mm with single 15mm C.P. brass pillar tapV-2 I.No.14.7.7 Unit 2203.95 2203.95 4.0 False None None False None False 8815.8 0 3842197 146628 None MMHB120 Supplying & erection of RCC rings for well steining of 0.3 Mtr Depth using M-20 grade concrete using clean graded granite or trap or jelly of approved quality 20mm and down size well compacted including centering, from work and plastering for both faces with C.M 1:3 proportion as per design using 6.50mm M.S. coil at the rate of 10 Kgs/ring including cost of steel and fabrication, bailing out of water, errection etc., complete iii) For 1.20 M dia (clear) rings of steining thickness 0.075 M upto 18 M depth RWS SR 2019-20 Zone-BV-2 I.No.114/11.20.3 Each 1097.25 1097.25 10.0 False None None False None False 10972.5 0 3842198 146628 None MMHB121 Supplying and wiring adopting loop system in the existing PVC conduit/ pipe using copper PVC insulated multistrand 2 x 1.5 sq.mm wire without switch on the existing the matel box the other end of the wires shall be terminated with sufficient loose length in a PVC round block , complete for each outlet point wiring using class A Materials Short point upto 3 mts from tapping point to out let via switchEle SR I.No.2.1.1 P.No.05 Point 285.0 285.0 250.0 False None None False None False 71250.0 0 3842199 146628 None MMHB122 Supplying and wiring adopting loop system in the existing PVC conduit/ pipe using copper PVC insulated multistrand 2 x 1.5 sq.mm wire without switch on the existing the matel box the other end of the wires shall be terminated with sufficient loose length in a PVC round block , complete for each outlet point wiring using class Medium point above 3 mts upto 6mts from tapping point to outlet via switchEle SR I.No.2.1.2 P.No.05 Point 394.0 394.0 220.0 False None None False None False 86680.0 0 3842200 146628 None MMHB123 Supplying and wiring adopting loop system in the existing PVC conduit/ pipe using copper PVC insulated multistrand 2 x 1.5 sq.mm wire without switch on the existing the matel box the other end of the wires shall be terminated with sufficient loose length in a PVC round block , complete for each outlet point wiring using class Long point above 6 mts upto 10 mts from tapping point to outlet via switchEle SR I.No.2.1.3 P.No.05 Point 570.0 570.0 250.0 False None None False None False 142500.0 0 3842201 146628 None MMHB124 Supplying and flush mounting powder coated/Galavanized metal box suitable for mounding modular switch plates. The box should be firmly flush mounted after due groove cutting in brick / stone / cc wall 1 - 3 ModuleEle SR I.No.3.4.1 P.No.8 Each 138.0 138.0 63.0 False None None False None False 8694.0 0 3842202 146628 None MMHB125 Supplying and flush mounting powder coated/Galavanized metal box suitable for mounding modular switch plates. The box should be firmly flush mounted after due groove cutting in brick / stone / cc wall 4 - 5 ModuleEle SR I.No.3.4.3 P.No.8 Each 177.0 177.0 40.0 False None None False None False 7080.0 0 3842203 146628 None MMHB126 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of machine screws , bolts nuts etc,.complete on the existing metal box1 to 3 moduleEle SR I.No.3.5.2 P.No.8 Each 161.0 161.0 63.0 False None None False None False 10143.0 0 3842204 146628 None MMHB127 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of machine screws , bolts nuts etc,.complete on the existing metal box4 moduleEle SR I.No.3.5.3 P.No.8 Each 175.0 175.0 40.0 False None None False None False 7000.0 0 3842205 146628 None MMHB128 Supplying and fixing of modular switch / socket / stepped electronic fan regulator's / dimmer / telephone socket etc on existing modular switch plate6 amps one way switch Ele SR I.No.3.6.1 P.No.9 Each 102.0 102.0 217.0 False None None False None False 22134.0 0 3842206 146628 None MMHB129 Supplying and fixing of modular switch / socket / stepped electronic fan regulator's / dimmer / telephone socket etc on existing modular switch plate 6 amps two way switch Ele SR I.No.3.6.2 P.No.9 Each 166.0 166.0 69.0 False None None False None False 11454.0 0 3842207 146628 None MMHB130 Supplying and fixing of modular switch / socket / stepped electronic fan regulator's / dimmer / telephone socket etc on existing modular switch plate stepped fan Regulator'sEle SR I.No.3.6.4 P.No.9 Each 357.0 357.0 33.0 False None None False None False 11781.0 0 3842208 146628 None MMHB131 Supply and fixing one metal Fan box with round hook Ele SR I.No.1.13 P.No.4 Each 117.0 117.0 31.0 False None None False None False 3627.0 0 3842209 146628 None MMHB132 Supply and fixing of Metal Socket set of 20A,230V, 2pole & Earth Plug & Socket on a suitable MS box for incorporating SP/TP MCB( without MCB) ,complete with internal connections with all accessories complete.Ele SR I.No.5.45.1 P.No.21 Each 945.0 945.0 22.0 False None None False None False 20790.0 0 3842210 146628 None MMHB133 Supplying 2 mm thick heavy gauge PVC conduit pipe with suitable size bends / metal / PVC junction boxes adhesive paste etc..and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures seen with fish wires where ever necessary 20 mm diaEle SR I.No.1.2.1 P.No.2 Mtr 66.0 66.0 250.0 False None None False None False 16500.0 0 3842211 146628 None MMHB134 Supplying 2 mm thick heavy gauge PVC conduit pipe with suitable size bends / metal / PVC junction boxes adhesive paste etc..and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures seen with fish wires where ever necessary 25 mm diaEle SR I.No.1.2.2 P.No.2 Mtr 78.0 78.0 250.0 False None None False None False 19500.0 0 3842212 146628 None MMHB135 Supplying 2 mm thick heavy gauge PVC conduit pipe with suitable size bends / metal / PVC junction boxes adhesive paste etc..and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures seen with fish wires where ever necessary 40 mm dia 2.5mm thickEle SR I.No.1.2.4 P.No.2 Mtr 147.0 147.0 220.0 False None None False None False 32340.0 0 3842213 146628 None MMHB136 WIRING FOR Lighting/Power Circuits using one of FRLS PVC insulated 1100 v grade multistrand copper wire with low conductor resistance single core wire in open or concealed wiring system with specified IS-694:1990 and conforming to GTP of Group-A. WIRING FOR Lighting/Power Circuits using one of FRLS PVC insulated 1100 v grade multistrand copper wire with low conductor resistance single core wire in open or concealed wiring system with specified IS-694:1990 and conforming to GTP of Group-A.1.5 Sq.mmEle SR I.No.2.3.2 P.No.5 Mtr 26.0 26.0 180.0 False None None False None False 4680.0 0 3842214 146628 None MMHB137 WIRING FOR Lighting/Power Circuits using one of FRLS PVC insulated 1100 v grade multistrand copper wire with low conductor resistance single core wire in open or concealed wiring system with specified IS-694:1990 and conforming to GTP of Group-A. WIRING FOR Lighting/Power Circuits using one of FRLS PVC insulated 1100 v grade multistrand copper wire with low conductor resistance single core wire in open or concealed wiring system with specified IS-694:1990 and conforming to GTP of Group-A.2,5 sq.mmEle SR I.No.2.3.3 P.No.5 Mtr 42.0 42.0 150.0 False None None False None False 6300.0 0 3842215 146628 None MMHB138 WIRING FOR Lighting/Power Circuits using one of FRLS PVC insulated 1100 v grade multistrand copper wire with low conductor resistance single core wire in open or concealed wiring system with specified IS-694:1990 and conforming to GTP of Group-A. WIRING FOR Lighting/Power Circuits using one of FRLS PVC insulated 1100 v grade multistrand copper wire with low conductor resistance single core wire in open or concealed wiring system with specified IS-694:1990 and conforming to GTP of Group-A.4 sq.mmEle SR I.No.2.3.4 P.No.5 Mtr 63.0 63.0 180.0 False None None False None False 11340.0 0 3842216 146628 None MMHB139 WIRING FOR Lighting/Power Circuits using one of FRLS PVC insulated 1100 v grade multistrand copper wire with low conductor resistance single core wire in open or concealed wiring system with specified IS-694:1990 and conforming to GTP of Group-A. WIRING FOR Lighting/Power Circuits using one of FRLS PVC insulated 1100 v grade multistrand copper wire with low conductor resistance single core wire in open or concealed wiring system with specified IS-694:1990 and conforming to GTP of Group-A.6sq.mmEle SR I.No.2.3.5 P.No.5 Mtr 92.0 92.0 200.0 False None None False None False 18400.0 0 3842217 146628 None MMHB140 WIRING FOR Lighting/Power Circuits using one of FRLS PVC insulated 1100 v grade multistrand copper wire with low conductor resistance single core wire in open or concealed wiring system with specified IS-694:1990 and conforming to GTP of Group-A. WIRING FOR Lighting/Power Circuits using one of FRLS PVC insulated 1100 v grade multistrand copper wire with low conductor resistance single core wire in open or concealed wiring system with specified IS-694:1990 and conforming to GTP of Group-A.10sq.mmEle SR I.No.2.3.6 P.No.5 Mtr 167.0 167.0 110.0 False None None False None False 18370.0 0 3842218 146628 None MMHB141 Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase / 3 phase / single/ DOUBLE door with powder coated painting. Made out of 14SWG MS enclouser.6 Way TP & N( LDB/PDB)Ele SR I.No.5.19.12 P.No.18 Each 4940.0 4940.0 10.0 False None None False None False 49400.0 0 3842219 146628 None MMHB142 Supplying and fixing miniature circuit breaker, on the existing MCB distribution board using necessary fixing materials and C type curve,indicator ON/OFF, energy cross-3 with short circuit breaking capacity of 10K & complete wiring as required conforming to IEC 60898. 5-32 Amps SPEle SR I.No.5.18.1 P.No.17 Each 415.0 415.0 38.0 False None None False None False 15770.0 0 3842220 146628 None MMHB143 Supplying and fixing 63A DP MCB miniature circuit breaker on the existing MCB distribution board ( Main / EMGPNL)using necessary fixing materials and wiring complete as requiredEle SR I.No.5.18.6 P.No.17 Each 1102.0 1102.0 22.0 False None None False None False 24244.0 0 3842221 146628 None MMHB144 Supplying and fixing 32A DP MCB miniature circuit breaker on the existing MCB distribution board (EMG PNL) using necessary fixing materials and wiring complete as requiredEle SR I.No.5.18.4 P.No.17 Each 739.0 739.0 15.0 False None None False None False 11085.0 0 3842222 146628 None MMHB145 Supply of box type suitable for 28W T5 single/twin lamp and suspension mounted luminaire & optical reflector. Prewired with HF electronic ballast, push fit type lamp holders and main contactors. Channel cover shall be made of CRCA MS sheet & finishing is done with stove enameled white with end caps made of engineering plastic.1x 4'-28WEle SR I.No.11.3.3 P.No.43 Each 1269.0 1269.0 60.0 False None None False None False 76140.0 0 3842223 146628 None MMHB146 Supplying capacitor type 48" sweep ceiling fan complete with down rod blades , shackle canopies etc suitable for operation on 230V 50 cycles single phase AC supply conforming to ISS - 374 - 1979 and with double ball bearing system [Khaitan, Crompton greaves, Usha]Ele SR I.No.6.3.1 P.No.30 Each 2984.0 2984.0 33.0 False None None False None False 98472.0 0 3842224 146628 None MMHB147 Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing 'S' hook with fan regulator to the existing board together with supplying and fixing 5 amps. ceiling rose, necessary length of 23 / 0.0076 inch PVC insulated twin twisted copper wire and wiring. ---- etc., complete as per specificaiton with all lead and lift and as per directions of the Engineer-in-chargeEle SR I.No.13.10 P.No.57 Each 171.0 171.0 31.0 False None None False None False 5301.0 0 3842225 146628 None MMHB148 Supplying heavy gauge PVC conduit pipe ……mm dia .......mm thick confirming to IS 2509 with suitable size bends,metal/PVC junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary 19/20 mm dia 2mm thickEle SR I.No.1.2.1 Mtr 69.3 69.3 145.0 False None None False None False 10048.5 0 3842226 146628 None MMHB149 Supplying heavy gauge PVC conduit pipe ……mm dia .......mm thick confirming to IS 2509 with suitable size bends,metal/PVC junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary 125mm dia 2mm thickEle SR I.No.1.2.2 Mtr 81.9 81.9 50.0 False None None False None False 4095.0 0 3842227 146628 None MMHB150 Supplying and fixing sheet metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc 75x75x65mmEle SR I.No.1.4.1 Each 106.0 106.0 9.0 False None None False None False 954.0 0 3842228 146628 None MMHB151 Supplying and fixing sheet metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc 100x75x65mmEle SR I.No.1.4.2 Each 118.0 118.0 6.0 False None None False None False 708.0 0 3842229 146628 None MMHB152 Supplying and fixing sheet metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc180X90X65mmEle SR I.No.1.4.4 Each 161.0 161.0 6.0 False None None False None False 966.0 0 3842230 146628 None MMHB153 Supplying and fixing PVC/metal conduit Deep junction box 19/20mm Deep Junction BoxEle SR I.No.1.5.1 Each 49.0 49.0 9.0 False None None False None False 441.0 0 3842231 146628 None MMHB154 Supplying and fixing PVC/metal conduit Deep junction box 25mm Deep Junction BoxEle SR I.No.1.5.2 Each 56.0 56.0 3.0 False None None False None False 168.0 0 3842232 146628 None MMHB155 Extra for Groove cutting in brick wall/CC floor to the suitable depth for concealing of Conduit/GI pipe and plastering, finishing upto wall surface complete. upto 50mm Conduit in Brick WallsEle SR I.No.1.7.1 Mtr 29.0 29.0 27.0 False None None False None False 783.0 0 3842233 146628 None MMHB156 Supplying And Fixing Metal Fan Box with Round Hook. Ele SR I.No.1.13 Nos 117.0 117.0 2.0 False None None False None False 234.0 0 3842234 146628 None MMHB157 Point wiring Copper without switch.Supplying and wiring adopting loop system in existing PVC Conduit /casing usingf 1100v Grade , COPPER conductor flexible multistrand FRLS PVC insulated., 2x1.5 Sqm. Cable confirming to the GTP without switch, the other end of the wires shall be terminated with sufficient loose length in a wood /PVC round block. Complete for each outlet(5/2.3) Group A Short piont up to 3 Mtr from tapping piont out let via switch. Ele SR I.No.1.2.1 Point 269.0 269.0 11.0 False None None False None False 2959.0 0 3842235 146628 None MMHB158 Point wiring Copper without switch.Supplying and wiring adopting loop system in existing PVC Conduit /casing usingf 1100v Grade , COPPER conductor flexible multistrand FRLS PVC insulated., 2x1.5 Sqm. Cable confirming to the GTP without switch, the other end of the wires shall be terminated with sufficient loose length in a wood /PVC round block. Complete for each outlet(5/2.3) Group A Short piont up to 6 Mtr from tapping piont out Ele SR I.No.1.2.2 Point 379.0 379.0 6.0 False None None False None False 2274.0 0 3842236 146628 None MMHB159 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 1.5 SqmmEle SR I.No.2.3.2 Mtr 26.0 26.0 240.0 False None None False None False 6240.0 0 3842237 146628 None MMHB160 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 2.5 SqmmEle SR I.No.2.3.3 Mtr 42.0 42.0 78.0 False None None False None False 3276.0 0 3842238 146628 None MMHB161 Supplying and fixing superior quality switch mounting poly carbonate plate with necessary supporting back plate with required nos of machine tools, bolts, nuts etc., complete on the existing metal/PVC box.4 ModuleEle SR I.No.3.5.2 Each 161.0 161.0 6.0 False None None False None False 966.0 0 3842239 146628 None MMHB162 Supplying and fixing superior quality switch mounting poly carbonate plate with necessary supporting back plate with required nos of machine tools, bolts, nuts etc., complete on the existing metal/PVC box1 to 3 ModuleEle SR I.No.3.5.1 Each 137.0 137.0 1.0 False None None False None False 137.0 0 3842240 146628 None MMHB163 Supplying and fixing superior quality switch mounting poly carbonate plate with necessary supporting back plate with required nos of machine tools, bolts, nuts etc., complete on the existing metal/PVC box.8 ModuleEle SR I.No.3.5.5 Each 284.0 284.0 6.0 False None None False None False 1704.0 0 3842241 146628 None MMHB164 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 16Amps one way switchEle SR I.No.3.6.7 Each 180.0 180.0 3.0 False None None False None False 540.0 0 3842242 146628 None MMHB165 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16Amps universal socketEle SR I.No.3.6.10 Each 236.0 236.0 4.0 False None None False None False 944.0 0 3842243 146628 None MMHB166 Supplying and fixing 32Amps security and energy saving DP switch with key tag suitable to operate on 230 Volts,50Hz AC supply & completely wired on existing box.Ele SR I.No.3.7 Each 646.0 646.0 3.0 False None None False None False 1938.0 0 3842244 146628 None MMHB167 Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers.32AmpsEle SR I.No.5.7.2 Each 241.0 241.0 9.0 False None None False None False 2169.0 0 3842245 146628 None MMHB168 Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase / 3 phase / single door with powder coated painting. Made out of 14 SWG MS enclosure. II - Double Door 8 Way SP & NEle SR I.No.5.19.8 Each 1854.0 1854.0 3.0 False None None False None False 5562.0 0 3842246 146628 None MMHB169 Earth Electrode for Grounding Supplying fixing andwiring earth electrode for groundingof lifts, transformers, DGsetsetc. using 40mm dia 2.9mm thick 2.5m long GI pipe with GI funnel with mesh and suitable size reducer fixed on the top of the earth electrode.The funnel should be enclosed in a CC chamber of 400x400x400mm with a cast iron cover. The earth electrode shall have staggered holes of 12mm dia and the electrode should be covered 150mm all-round with alternate layers of salt and charcoal from the bottom of the CC chamber. The connection from the electrode is to be established through GI strip using GI bolts and nutsEle SR I.No.12.57 Job 4256.0 4256.0 3.0 False None None False None False 12768.0 0 3842247 146628 None MMHB170 PVC Batten with LED Tubes Supplying of ......feet - PVC Batten with integrated LED tube .....W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than 80. Power Input: 220-240V @ 50/60Hz & Power factor less then 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition.LED light fighting 1 x4'- 20/22 w Ele SR I.No.11.3.2 Each 690.0 690.0 12.0 False None None False None False 8280.0 0 3842248 146628 None MMHB171 Fixing all types and all capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling / rafters / girders using 23/0.0076” twin twisted PVC insulated wires, required Nos of round blocks and clamps. On wall / ceiling / Rafter / Girders Ele SR I.No.13.7.1 Each 122.0 122.0 13.0 False None None False None False 1586.0 0 3842249 146628 None MMHB172 Supplying 250 amps rated 3phase Supplying ......... amps rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete.250Amps 4x30x10mm Aluminium StripsEle SR I.No.5.40.2 m 3435.0 3435.0 0.5 False None None False None False 1717.5 0 3842250 146628 None MMHB173 Energy Meter. Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 32/63 Amps three phase 4 wire whole current class-1 Accuracy Energy Meter. Ele SR I.No.5.35 Each 5705.0 5705.0 1.0 False None None False None False 5705.0 0 3842251 146628 None MMHB174 Fluorescent Tubes Supplying and fixing of 5'-80 Watts of T8 Fluorescent Tube with 54W power consumption with low 3mg Mercury content less phosphor coating. Operating voltage range from 180V to 265V, 50Hz AC power Supply Ele SR I.No.12.21 Nos 520.0 520.0 1.0 False None None False None False 520.0 0 3842252 146628 None MMHB175 Patty Type Fittimg Supplying of patty fitting, made out of CRCA Sheet metal body with locking type holder completely wired with HF Electronic Ballast, Operating voltage range from 180V to 265V, 50Hz AC power supply excluding Tube. 1 x 4' Tube light fitting. Ele SR I.No.12.25.2 Each 340.0 340.0 1.0 False None None False None False 340.0 0 3842253 146628 None MMHB176 Supplying & Fixing of 70-150 Watts lamp holder 2 Pin Ele SR I.No.12.46 Nos 63.0 63.0 3.0 False None None False None False 189.0 0 3842254 146628 None MMHB177 Fixing of Fan Fixing a ceiling / wall mounting fan of all capacities and all types, with necessary clamps and 'S' hook made out of 15mm dia MS rod, with 5 amps. ceiling rose of approved quality with necessary length of 23 / 0.0076 inch PVC insulated twin twisted wire of approved quality, mounted on a suitable size wooden board and wired. Ele SR I.No.13.11 Each 315.0 315.0 2.0 False None None False None False 630.0 0
generalCriterionList	createdTs version createdDate modifiedDate criterionType description tenderEligibilityCriterionDocumentList 1724394207000 1 None None ELIGIBILITY GST paid seprately None 1724394207000 0 None None ELIGIBILITY Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka None 1724394207000 0 None None ELIGIBILITY Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document. None 1724394207000 0 None None ELIGIBILITY It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission. None 1724394207000 0 None None ELIGIBILITY EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection. None
preQualCriterionList	None
technicalCriterionList	createdTs version createdDate modifiedDate description criterionCategoryText criterionTypeOthersValue tenderTechnicalCriterionDocumentList None None None None To qualify for award of this contract each tenderer in its name should have in the last five years. Satisfactorily completed (at least 90% of the Contract value), as prime contractor, at least one similar work such as Building work Rs 110.56 Lakhs (Performance Certificate certified by Not less than the ranking of EE) Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None Executed in one year (for a continuous period of 12 months) the following minimum quantities of work Earthwork excavation-689.04Cum Past Experience None createdTs version createdDate modifiedDate documentName None None None None Others -- Quantity wise work done None None None None Executed in one year (for a continuous period of 12 months) the following minimum quantities of work All type of Cement Concrete (Plain and Reinforced) 397.72 Cum Past Experience None createdTs version createdDate modifiedDate documentName None None None None Others -- Quantity wise work done None None None None Executed in one year (for a continuous period of 12 months) the following minimum quantities of work Steel reinforcement / TMT Steel 33.56 Tones Past Experience None createdTs version createdDate modifiedDate documentName None None None None Others -- Quantity wise work done None None None None Executed in one year (for a continuous period of 12 months) the following minimum quantities of work BBM/SSM/ Similar masonary walls 959.15 Cum Past Experience None createdTs version createdDate modifiedDate documentName None None None None Others -- Quantity wise work done None None None None PWD Registration certificate Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None PWD Registration Certificate (Class I/II/III/IV) None None None None GST Registration certificate Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None GST Registration None None None None To qualify for award of this contract each tenderer in its name should have in the last five years i.e. 2019-20 to 2023-24 achieved in at least two financial years an average annual financial turnover (in all classes of civil engineering construction works only) of Rs 442.26.00 Lakhs Financial Status None createdTs version createdDate modifiedDate documentName None None None None Audited CA Certificate of Annual Turnover None None None None liquid assets and or availability of credit facilities of not less than Rs. 66.33 Lakhs (Credit lines/ letters of credit/ certificates from Nationalized / Scheduled banks for meeting the fund requirement etc). (Usually not less than 30% of the estimated cash flow Financial Status None createdTs version createdDate modifiedDate documentName None None None None Line of Credit None None None None Not Applicable Others Not Applicable createdTs version createdDate modifiedDate documentName None None None None Others -- Not applicable None None None None Not Applicable Others Not Applicable createdTs version createdDate modifiedDate documentName None None None None Others -- Not applicable None None None None Not Applicable Others Not Applicable createdTs version createdDate modifiedDate documentName None None None None Others -- Not Applicable None None None None Not Applicable Others Not Applicable createdTs version createdDate modifiedDate documentName None None None None Others -- Not applicable None None None None Not Applicable Others Not Applicable createdTs version createdDate modifiedDate documentName None None None None Others -- Not Applicable None None None None Not Applicable Others Not Applicable createdTs version createdDate modifiedDate documentName None None None None Others -- Not applicable
tenderCriterionDocumentList	documentName optional documentTypeText Upload All Relevant Documents as per Bid Document and Technical Criteria True Technical Bid
tenderWorkLocationList
tenderAddress	createdTs 1724396157000 version 0 createdDate None modifiedDate None blockNumber DUDC DC office, Dam Road Vijayangara Dist street None city HOSPET state Karnataka pin 583201
tenderRecallDTO	None