createdTs	None
version	None
createdDate	None
modifiedDate	None
noticeInvitingTenderDTO	createdTs 1726810184773 version 2 createdDate None modifiedDate None tenderType RFQ evaluationType TWO_COVER evaluationTypeText Two Cover invitingStrategy RESERVED invitingStrategyText Reserved taxType INCLUSIVE_TAX tenderFee 1370.00 emd 55000.00 bidValueType ITEM_WISE bidValueTypeText Item wise tenderReceiptClose 05-10-2024 16:00:00 tenderQueryClose 24-09-2024 16:00:00 technicalBidOpen 07-10-2024 11:00:00 publishedDate 20-09-2024 16:22:30 publishedByPost EWHFWD_EE_EEOFF_KLB publishedByUser KPE14208 - MANIK S KANKATTE bidValidityPeriod 90 noOfCalls 1 preBidMeetingDate None preBidMeetingYn False preQualificationBidOpen None denominationType RUPEES denominationTypeText Rupees retenderedYn None percentageRateTypeText None contactPerson Ishwar S Kumbar splitEmdRequiredYn False emdBankGuarantee None emdCash None bgValidityPeriod None hideWeightage None multipleCurrencySelectionAllowedYn False isTechWeightageAllowed None highestBidderSelection False isVariableEmdAllowed None qcbsTenderYn None itemwiseEmdRequiredYn None sampleSubmissionDate None officeNumber 08472241982 mobileNumber 9686581469 tenderSupplierList None
tenderSchedule	createdTs 1726810184796 version 5 createdDate None modifiedDate None tenderNumber EWHFWD/2024-25/BD/WORK_INDENT580 title CONSTRUCTION OF HEALTH AND WELLNESS CENTRE AT ANANTHASHAYANAGUDI IN HOSPET TALUK IN VIJAYANAGARA DISTRICT description CONSTRUCTION OF HEALTH AND WELLNESS CENTRE AT ANANTHASHAYANAGUDI IN HOSPET TALUK IN VIJAYANAGARA DISTRICT category WORKS categoryText Works ecv 5466369.46 deptName Engineering Wing of Health and Family Welfare Department status PUBLISHED statusText Published remarks None csrValue None ecvtenderYn False location 3525 locationName EWHFWD Executive Engineer Office Kalburagi provisionalAmount 6500000.0 groupOverheadTotal None fileNumber HFW/AEE/HWC-ANANTHASHAYANAGUDI/15THFINANCE/2024-25
tenderSubEstimateList	createdTs version createdDate modifiedDate workCategoryName subEstimateName estimateTotal itemList 1726810185000 0 None None Buildings Ground Floor 3050796.75 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 4034421 156515 None PWD V- 3 SR 2023-24 Page No-7 It No-2.4 (II) B Ground Floor: Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth upto 300 mm, removal of stumps of trees cut earlier and disposalof unserviceable materials and stacking of serviceable material to be used or auctioned, including removal and disposal of top organic soil not exceeding 150 mm in thickness. By Manual Means ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work 100 Sqm 1575.0 1575.0 2.12 False None None False None False 3339.0 0 4034422 156515 None PWD V- 2 SR 2023-24 Page No-8 It No-1.12 Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work. ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Cum 99.75 99.75 42.38 False None None False None False 4227.405 0 4034423 156515 None PWD V- 1 SR 2023-24 Page No-5 It No-1.4.1 Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work. In all kinds of soils Depth upto 1.5 m ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Cum 254.1 254.1 133.61 False None None False None False 33950.301 0 4034424 156515 None PWD V- 1 SR 2023-24 Page No-6 It No-1.5.1 Earth work excavation by manual means for drains,canals, waste weir draft, approach channels, key trench, foundation of Bridges and such similar works, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, excavated surface leveled and sides neatly dressed disposing off or leveling the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage & other appurtenances required to complete the work. In ordinary/soft rock without blasting upto 1.5 m depth ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Cum 313.95 313.95 33.4 False None None False None False 10485.93 0 4034425 156515 None PWD V- 2 SR 2023-24 Page No-5 It No-4.1 Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 l/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications. ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Sqm 123.9 123.9 104.26 False None None False None False 12917.814 0 4034426 156515 None PWD V- 1 SR 2023-24 Page No-7 It No-1.9 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Cum 279.3 279.3 133.61 False None None False None False 37317.273 0 4034427 156515 None PWD V- 1 SR 2023-24 Page No-7 It No-1.8 Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work. ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Cum 497.7 497.7 62.58 False None None False None False 31146.066 0 4034428 156515 None PWD V- 1 SR 2023-24 Page No-15 It No-2.1.2 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:4:8 Using 40 mm nominal size graded crushed coarse aggregates ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Cum 5947.2 5947.2 22.16 False None None False None False 131789.952 0 4034429 156515 None PWD V- 1 SR 2023-24 Page No-15 It No-2.2.1 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Cum 7129.46 7129.46 30.77 False None None False None False 219373.4842 0 4034430 156515 None PWD V- 1 SR 2023-24 Page No-16 It No-2.3.1 Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse , COLUMNS aggregates Up to Plinth ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Cum 11286.55 11286.55 2.03 False None None False None False 22911.6965 0 4034431 156515 None PWD V- 1 SR 2023-24 Page No-16 It No-2.3.1 Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse , PLINTH BEAM ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Cum 9958.73 9958.73 11.73 False None None False None False 116815.9029 0 4034432 156515 None PWD V- 1 SR 2023-24 Page No-16 It No-2.5.1 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates, COLUMNS ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Cum 11834.55 11834.55 4.78 False None None False None False 56569.149 0 4034433 156515 None PWD V- 1 SR 2023-24 Page No-16 It No-2.5.1 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates, RCC BEAMS ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Cum 11138.4 11138.4 5.19 False None None False None False 57808.296 0 4034434 156515 None PWD V- 1 SR 2023-24 Page No-16 It No-2.5.1 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates, RCC SLAB ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Cum 10442.25 10442.25 15.8 False None None False None False 164987.55 0 4034435 156515 None PWD V- 1 SR 2023-24 Page No-16 It No-2.5.1 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates, RCC STAIRCASE ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Cum 10442.25 10442.25 2.95 False None None False None False 30804.6375 0 4034436 156515 None PWD V- 1 SR 2023-24 Page No-16 It No-2.5.1 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates, LINTELS ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Cum 11138.4 11138.4 2.65 False None None False None False 29516.76 0 4034437 156515 None PWD V- 1 SR 2023-24 Page No-16 It No-2.5.1 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates, Chejja ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Cum 10094.18 10094.18 0.61 False None None False None False 6157.4498 0 4034438 156515 None PWD V- 1 SR 2023-24 Page No-15 It No-2.1.4 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 Using 20 mm nominal size graded crushed coarse aggregates ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Cum 10444.56 10444.56 3.58 False None None False None False 37391.5248 0 4034439 156515 None PWD V- 1 SR 2023-24 Page No-18 It No-2.11.a Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Buildings ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work t 93929.85 93929.85 6.92 False None None False None False 649994.562 0 4034440 156515 None PWD V- 2 SR 2023-24 Page No-14 It No-6.8 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Cum 8367.45 8367.45 49.27 False None None False None False 412264.2615 0 4034441 156515 None PWD V- 2 SR 2023-24 Page No-14 It No-6.14 Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:3 (1 cement :3 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Sqm 1113.0 1113.0 37.58 False None None False None False 41826.54 0 4034442 156515 None PWD V- 2 SR 2023-24 Page No-100 It No-12.13.1 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Cum 103755.75 103755.75 0.4 False None None False None False 41502.3 0 4034443 156515 None PWD V- 2 SR 2023-24 Page No-105 It No-12.57.2 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification. -do- 30 mm thick one side teak and one side commercial ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Sqm 3667.65 3667.65 11.34 False None None False None False 41591.151 0 4034444 156515 None PWD V- 2 SR 2023-24 Page No-111 It No-12.93.1 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 850 kg/m3, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-InCharge. (Fixtures shall be paid for separately) Size 62 x 100mm ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work m 737.1 737.1 24.0 False None None False None False 17690.4 0 4034445 156515 None PWD V- 2 SR 2023-24 Page No-112 It No-12.94.1 Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) having minimum density of 650 kg/m3 and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength of 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws The cost includes cost of materials, transportation, labour and fixing charges.(Cost of Fixtures to be paid separately) 30 mm thickness ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Sqm 3659.25 3659.25 6.3 False None None False None False 23053.275 0 4034446 156515 None PWD V- 2 SR 2023-24 Page No-105 It No-12.51 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Nos 1066.8 1066.8 6.0 False None None False None False 6400.8 0 4034447 156515 None PWD V- 2 SR 2023-24 Page No-105 It No-12.60 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Nos 1104.6 1104.6 6.0 False None None False None False 6627.6 0 4034448 156515 None PWD V- 2 SR 2023-24 Page No-105 It No-12.61 Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. complete. ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Nos 1039.5 1039.5 6.0 False None None False None False 6237.0 0 4034449 156515 None PWD V- 2 SR 2023-24 Page No-105 It No-12.62 Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Nos 248.85 248.85 12.0 False None None False None False 2986.2 0 4034450 156515 None PWD V- 2 SR 2023-24 Page No-105 It No-12.63 Providing and fixing aluminium tower bolts, ISI marked, anodised (an- odic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Nos 136.5 136.5 12.0 False None None False None False 1638.0 0 4034451 156515 None PWD V- 2 SR 2023-24 Page No-105 It No-12.64 Providing and fixing PTMT door catcher of length 72 mm and dia. of 42 mm with suitable washers weighing not less than 33 gms ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Nos 57.75 57.75 12.0 False None None False None False 693.0 0 4034452 156515 None PWD V- 2 SR 2023-24 Page No-107 It No-12.75.1 Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : 125x85x5.5 mm (heavy type) ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Nos 288.75 288.75 12.0 False None None False None False 3465.0 0 4034453 156515 None PWD V- 2 SR 2023-24 Page No-69 It No-10.6.3 Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Fastener with threaded dia 12 mm ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Nos 63.0 63.0 36.0 False None None False None False 2268.0 0 4034454 156515 None PWD V- 2 SR 2023-24 Page No-205 It No-20.80 Supplying and fixing new Honne wood beads wherever necessary including cost of materials, labour, complete as per specifications. ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work m 44.1 44.1 35.4 False None None False None False 1561.14 0 4034455 156515 None PWD V- 2 SR 2023-24 Page No-86 It No-11.34A Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding. ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Kg 176.4 176.4 232.47 False None None False None False 41007.708 0 4034456 156515 None PWD V- 2 SR 2023-24 Page No-110 It No-12.89 Providing & fixing of 2.5 track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 94mm width x 45mm height with reinforcement of 1mm thickness and Sash with overall size of 39mm x 58mm with GI reinforcement of 1.5mm and mesh sash of size 25mm x 42mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 5mm plain float glass, standard hardware& single point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 1819mm x 1819mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Sqm 6878.55 6878.55 10.35 False None None False None False 71192.9925 0 4034457 156515 None PWD V- 2 SR 2023-24 Page No-109 It No-12.85 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Sqm 6004.95 6004.95 0.72 False None None False None False 4323.564 0 4034458 156515 None PWD V- 2 SR 2023-24 Page No-43 It No-8.1 Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Sqm 221.55 221.55 92.87 False None None False None False 20575.3485 0 4034459 156515 None PWD V- 2 SR 2023-24 Page No-41 It No-8.1.1 Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Sqm 267.75 267.75 330.84 False None None False None False 88582.41 0 4034460 156515 None PWD V- 2 SR 2023-24 Page No-41 It No-8.4.2 Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Sqm 327.6 327.6 38.43 False None None False None False 12589.668 0 4034461 156515 None PWD V- 2 SR 2023-24 Page No-41 It No-8.2.2 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Sqm 292.95 292.95 225.61 False None None False None False 66092.4495 0 4034462 156515 None PWD V- 2 SR 2023-24 Page No-43 It No-8.16.3 Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. ( length of mesh only be measured for payment Plaster mesh 100mm wide ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work m 46.2 46.2 408.6 False None None False None False 18877.32 0 4034463 156515 None PWD V- 2 SR 2023-24 Page No-54 It No-8.79 Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge: 10mm to 15 mm wide and 8 mm deep groove. ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work m 54.6 54.6 238.64 False None None False None False 13029.744 0 4034464 156515 None PWD V- 2 SR 2021-22 Page No-60 It No-9.12.2 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Sqm 1202.25 1202.25 72.88 False None None False None False 87619.98 0 4034465 156515 None PWD V- 2 SR 2023-24 Page No-63 It No-9.24 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. ** Polished Granite stone slab Black, Cherry Red, Brown, Cat Eye,Lakared, River Pink,Orissa Blue or equivalent. ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Sqm 2994.6 2994.6 31.52 False None None False None False 94389.792 0 4034466 156515 None PWD V- 2 SR 2023-24 Page No-60 It No-9.9 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conformingto IS : 15622 of approved make in colours such as White, Ivory, Grey,Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement :4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/m2 includingpointing the joints with white cement and matching pigment etc.,complete. ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Sqm 1129.8 1129.8 7.2 False None None False None False 8134.56 0 4034467 156515 None PWD V- 2 SR 2023-24 Page No-9.39 It No-65 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, completeas per specifications. ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Sqm 1521.45 1521.45 38.43 False None None False None False 58469.3235 0 4034468 156515 None PWD V- 2 SR 2021-22 Page No-83 It No-11.28 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Kgs 593.25 593.25 94.5 False None None False None False 56062.125 0 4034469 156515 None PWD V- 2 SR 2023-24 Page No-50 It No-8.51 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Sqm 105.0 105.0 423.71 False None None False None False 44489.55 0 4034470 156515 None PWD V- 2 SR 2023-24 Page No-48 It No-8.39 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as perdirections of Engineer-in-charge. ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Sqm 133.35 133.35 423.71 False None None False None False 56501.7285 0 4034471 156515 None PWD V- 2 SR 2023-24 Page No-46 It No-8.32 Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 litre/ 10 m². Over and including priming coat of exterior primer applied @ 0.90 litre/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Sqm 163.8 163.8 225.61 False None None False None False 36954.918 0 4034472 156515 None PWD V- 2 SR 2023-24 Page No-47 It No-8.34.3 Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Sqm 53.0 53.0 11.07 False None None False None False 586.71 0 4034473 156515 None PWD V- 2 SR 2023-24 Page No-48 It No-8.40 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as perdirections of Engineer-in-charge. ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Sqm 121.9 121.9 11.07 False None None False None False 1349.433 0 4034474 156515 None PWD V- 2 SR 2023-24 Page No-47 It No-8.34.1 Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Sqm 55.65 55.65 27.22 False None None False None False 1514.793 0 4034475 156515 None PWD V- 2 SR 2023-24 Page No-48 It No-8.38 Painting with oil type wood preservative of approved brand and manufacture :New work (two coats) to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering and knotting, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Sqm 42.0 42.0 27.22 False None None False None False 1143.24 0 1726810185000 0 None None Buildings First Floor 1750143.03 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 4034476 156516 None PWD V- 1 SR 2023-24 Page No-17 It No-2.5.1 First Floor: Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates, COLUMNS ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Cum 11900.85 11900.85 5.06 False None None False None False 60218.301 0 4034477 156516 None PWD V- 1 SR 2023-24 Page No-17 It No-2.5.1 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates, RCC BEAMS ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Cum 11204.7 11204.7 5.0 False None None False None False 56023.5 0 4034478 156516 None PWD V- 1 SR 2023-24 Page No-17 It No-2.5.1 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates, RCC SLAB ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Cum 10508.55 10508.55 13.56 False None None False None False 142495.938 0 4034479 156516 None PWD V- 1 SR 2023-24 Page No-17 It No-2.5.1 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates, LINTELS ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Cum 11204.7 11204.7 1.91 False None None False None False 21400.977 0 4034480 156516 None PWD V- 1 SR 2023-24 Page No-17 It No-2.5.1 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates, Chejja ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Cum 10160.47 10160.47 0.63 False None None False None False 6401.0961 0 4034481 156516 None PWD V- 2 SR 2023-24 Page No-15 It No-2.1.4 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Cum 7833.42 7833.42 9.87 False None None False None False 77315.8554 0 4034482 156516 None PWD V- 1 SR 2023-24 Page No-18 It No-2.11.a Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Buildings ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work t 94824.42 94824.42 2.84 False None None False None False 269301.3528 0 4034483 156516 None PWD V- 2 SR 2023-24 Page No-14 It No-6.8 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Cum 8447.14 8447.14 35.58 False None None False None False 300549.2412 0 4034484 156516 None PWD V- 2 SR 2023-24 Page No-14 It No-6.14 Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:3 (1 cement :3 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Sqm 1123.6 1123.6 41.21 False None None False None False 46303.556 0 4034485 156516 None PWD V- 2 SR 2023-24 Page No-100 It No-12.13.1 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Cum 104743.9 104743.9 0.33 False None None False None False 34565.487 0 4034486 156516 None PWD V- 2 SR 2023-24 Page No-105 It No-12.57.2 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification. -do- 30 mm thick one side teak and one side commercial ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Sqm 3702.58 3702.58 9.42 False None None False None False 34878.3036 0 4034487 156516 None PWD V- 2 SR 2023-24 Page No-111 It No-12.93.1 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 850 kg/m3, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-InCharge. (Fixtures shall be paid for separately) Size 62 x 100mm ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work m 744.12 744.12 12.0 False None None False None False 8929.44 0 4034488 156516 None PWD V- 2 SR 2023-24 Page No-112 It No-12.94.1 Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) having minimum density of 650 kg/m3 and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength of 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws The cost includes cost of materials, transportation, labour and fixing charges.(Cost of Fixtures to be paid separately) 30 mm thickness ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Sqm 3694.1 3694.1 3.15 False None None False None False 11636.415 0 4034489 156516 None PWD V- 2 SR 2023-24 Page No-105 It No-12.51 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Nos 1076.96 1076.96 5.0 False None None False None False 5384.8 0 4034490 156516 None PWD V- 2 SR 2023-24 Page No-105 It No-12.60 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Nos 1115.12 1115.12 5.0 False None None False None False 5575.6 0 4034491 156516 None PWD V- 2 SR 2023-24 Page No-105 It No-12.61 Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. complete. ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Nos 1049.4 1049.4 7.0 False None None False None False 7345.8 0 4034492 156516 None PWD V- 2 SR 2023-24 Page No-105 It No-12.62 Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Nos 251.22 251.22 12.0 False None None False None False 3014.64 0 4034493 156516 None PWD V- 2 SR 2023-24 Page No-105 It No-12.63 Providing and fixing aluminium tower bolts, ISI marked, anodised (an- odic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Nos 137.8 137.8 12.0 False None None False None False 1653.6 0 4034494 156516 None PWD V- 2 SR 2023-24 Page No-105 It No-12.64 Providing and fixing PTMT door catcher of length 72 mm and dia. of 42 mm with suitable washers weighing not less than 33 gms ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Nos 58.3 58.3 10.0 False None None False None False 583.0 0 4034495 156516 None PWD V- 2 SR 2023-24 Page No-107 It No-12.75.1 Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : 125x85x5.5 mm (heavy type) ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Nos 291.5 291.5 14.0 False None None False None False 4081.0 0 4034496 156516 None PWD V- 2 SR 2023-24 Page No-69 It No-10.6.3 Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Fastener with threaded dia 12 mm ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Nos 63.6 63.6 34.0 False None None False None False 2162.4 0 4034497 156516 None PWD V- 2 SR 2023-24 Page No-205 It No-20.80 Supplying and fixing new Honne wood beads wherever necessary including cost of materials, labour, complete as per specifications. ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work m 44.52 44.52 23.0 False None None False None False 1023.96 0 4034498 156516 None PWD V- 2 SR 2023-24 Page No-86 It No-11.34A Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding. ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Kg 178.08 178.08 163.62 False None None False None False 29137.4496 0 4034499 156516 None PWD V- 2 SR 2023-24 Page No-110 It No-12.89 Providing & fixing of 2.5 track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 94mm width x 45mm height with reinforcement of 1mm thickness and Sash with overall size of 39mm x 58mm with GI reinforcement of 1.5mm and mesh sash of size 25mm x 42mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 5mm plain float glass, standard hardware& single point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 1819mm x 1819mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Sqm 6944.06 6944.06 8.37 False None None False None False 58121.7822 0 4034500 156516 None PWD V- 2 SR 2023-24 Page No-109 It No-12.85 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Sqm 6062.14 6062.14 0.72 False None None False None False 4364.7408 0 4034501 156516 None PWD V- 2 SR 2023-24 Page No-41 It No-8.1.1 Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Sqm 223.66 223.66 87.99 False None None False None False 19679.8434 0 4034502 156516 None PWD V- 2 SR 2023-24 Page No-41 It No-8.1.1 Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Sqm 270.3 270.3 297.92 False None None False None False 80527.776 0 4034503 156516 None PWD V- 2 SR 2023-24 Page No-41 It No-8.4.2 Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Sqm 330.72 330.72 32.02 False None None False None False 10589.6544 0 4034504 156516 None PWD V- 2 SR 2023-24 Page No-41 It No-8.2.2 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Sqm 295.74 295.74 233.86 False None None False None False 69161.7564 0 4034505 156516 None PWD V- 2 SR 2023-24 Page No-43 It No-8.16.3 Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. ( length of mesh only be measured for payment Plaster mesh 100mm wide ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work m 46.64 46.64 268.8 False None None False None False 12536.832 0 4034506 156516 None PWD V- 2 SR 2023-24 Page No-54 It No-8.79 Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge: 10mm to 15 mm wide and 8 mm deep groove. ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work m 55.12 55.12 171.55 False None None False None False 9455.836 0 4034507 156516 None PWD V- 2 SR 2021-22 Page No-60 It No-9.12.2 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Sqm 1213.7 1213.7 55.67 False None None False None False 67566.679 0 4034508 156516 None PWD V- 2 SR 2023-24 Page No-60 It No-9.9 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conformingto IS : 15622 of approved make in colours such as White, Ivory, Grey,Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement :4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/m2 includingpointing the joints with white cement and matching pigment etc.,complete. ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Sqm 1140.56 1140.56 5.98 False None None False None False 6820.5488 0 4034509 156516 None PWD V- 2 SR 2023-24 Page No-9.39 It No-65 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, completeas per specifications. ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Sqm 1535.94 1535.94 32.02 False None None False None False 49180.7988 0 4034510 156516 None PWD V- 2 SR 2023-24 Page No-63 It No-9.24 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. ** Polished Granite stone slab Black, Cat Eye, River Pink or equivalent. ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Sqm 3023.12 3023.12 2.56 False None None False None False 7739.1872 0 4034511 156516 None PWD V- 2 SR 2021-22 Page No-50 It No-8.51 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Sqm 106.0 106.0 385.91 False None None False None False 40906.46 0 4034512 156516 None PWD V- 2 SR 2023-24 Page No-48 It No-8.39 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as perdirections of Engineer-in-charge. ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Sqm 134.62 134.62 385.91 False None None False None False 51951.2042 0 4034513 156516 None PWD V- 2 SR 2023-24 Page No-46 It No-8.32 Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 litre/ 10 m². Over and including priming coat of exterior primer applied @ 0.90 litre/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Sqm 165.36 165.36 233.86 False None None False None False 38671.0896 0 4034514 156516 None PWD V- 2 SR 2023-24 Page No-47 It No-8.34.3 Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Sqm 53.0 53.0 9.09 False None None False None False 481.77 0 4034515 156516 None PWD V- 2 SR 2023-24 Page No-48 It No-8.40 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as perdirections of Engineer-in-charge. ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Sqm 121.9 121.9 9.09 False None None False None False 1108.071 0 4034516 156516 None PWD V- 2 SR 2023-24 Page No-47 It No-8.34.1 Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Sqm 56.18 56.18 22.6 False None None False None False 1269.668 0 4034517 156516 None PWD V- 2 SR 2023-24 Page No-48 It No-8.38 Painting with oil type wood preservative of approved brand and manufacture :New work (two coats) to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering and knotting, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Sqm 42.4 42.4 22.6 False None None False None False 958.24 0 4034518 156516 None PWD V- 2 SR 2023-24 Page No-133 It No-15.1 Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6kg per m2 to achieve final DFT (dry film thickness) of 1mm including prime coat of epoxy primer @150 g per m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification & with a 10 years warranty on product & work from certified manufacturers as per the direction of the Engineer In charge. ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Sqm 789.7 789.7 109.54 False None None False None False 86503.738 0 4034519 156516 None PWD V- 2 SR 2021-22 Page No-23 It No-7.18 Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, curing complete as per specifications. ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Cum 2138.02 2138.02 1.2 False None None False None False 2565.624 0 1726810185000 0 None None Buildings Water Supply and Sanitation 177001.65 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 4034520 156517 None PWD V- 2 SR 2023-24 Page No-136 It No-14.28.1.2 Water Supply and Sanitation: Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe 40 mm dia ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work m 92.4 92.4 20.0 False None None False None False 1848.0 0 4034521 156517 None PWD V- 2 SR 2023-24 Page No-128 It No-13.64.1 Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 75mm nominal dia pipes ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work m 303.45 303.45 50.0 False None None False None False 15172.5 0 4034522 156517 None PWD V- 2 SR 2023-24 Page No-128 It No-13.64.2 Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 110mm nominal dia pipes ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work m 404.25 404.25 40.0 False None None False None False 16170.0 0 4034523 156517 None PWD V- 2 SR 2023-24 Page No-125 It No-13.47 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382,leaving 10mm gap for thermal expansion,(i)the single socketed pipes 75mm diameter ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work m 206.85 206.85 40.0 False None None False None False 8274.0 0 4034524 156517 None PWD V- 2 SR 2023-24 Page No-124 It No-13.44 Providing and fixing PVC (S.W.R) Nahani Trap 10cms x 10cms with all fitting arrangements & all necessary accessories complete ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Each 231.0 231.0 10.0 False None None False None False 2310.0 0 4034525 156517 None PWD V- 2 SR 2023-24 Page No-124 It No-13.44 Providing and fixing PVC (S.W.R) Gully Trap 10cms x 10cms with all fitting arrangements & all necessary accessories complete ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Each 363.3 363.3 6.0 False None None False None False 2179.8 0 4034526 156517 None PWD V- 2 SR 2023-24 Page No-136 It No-14.31 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Nos 1281.0 1281.0 4.0 False None None False None False 5124.0 0 4034527 156517 None PWD V- 2 SR 2023-24 Page No-123 It No-14.3.2 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked black solid plastic seat and lid ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Each 6095.25 6095.25 1.0 False None None False None False 6095.25 0 4034528 156517 None MARKET RATE Supplying, fixing, testing and commissioning of CP health faucet Hand operated spray unit (instant type) CP Crutch etc., complete as directed by the Engineer in charge. ALD-577. ( Jaguar make or Equalent ). ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Each 2100.0 2100.0 1.0 False None None False None False 2100.0 0 4034529 156517 None PWD V- 2 SR 2023-24 Page No-131 It No-14.1.1 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Each 5128.2 5128.2 3.0 False None None False None False 15384.6 0 4034530 156517 None PWD V- 2 SR 2023-24 Page No-131 It No-14.4.1 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : One urinal basin with 5 litre white P.V.C. automatic flushing cistern ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Each 4676.7 4676.7 1.0 False None None False None False 4676.7 0 4034531 156517 None PWD V- 2 SR 2023-24 Page No-124 It No-14.7.2 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Nos 2689.05 2689.05 5.0 False None None False None False 13445.25 0 4034532 156517 None PWD V- 2 SR 2021-22 Page No-133 It No-14.10.2.1 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink without drain board 610x510 mm bowl depth 200 mm ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Nos 5662.65 5662.65 1.0 False None None False None False 5662.65 0 4034533 156517 None PWD V- 2 SR 2021-22 Page No-136 It No-14.27.2 Providing and fixing white vitreous china laboratory sink including making all connections including cost of fittings : Size 600x450x200 mm ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Nos 3489.15 3489.15 1.0 False None None False None False 3489.15 0 4034534 156517 None PWD V- 2 SR 2023-24 Page No-122 It No-13.32.1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 15 mm nominal dia Pipes ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work m 324.45 324.45 25.0 False None None False None False 8111.25 0 4034535 156517 None PWD V- 2 SR 2023-24 Page No-122 It No-13.33.3 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) 25 mm nominal dia Pipes ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work m 310.8 310.8 20.0 False None None False None False 6216.0 0 4034536 156517 None PWD V- 2 SR 2023-24 Page No-115 It No-13.4.1 Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) : 25 mm nominal bore ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work No 576.45 576.45 6.0 False None None False None False 3458.7 0 4034537 156517 None PWD V- 2 SR 2023-24 Page No-139 It No-14.55.a Providing and fixing Bib cock with wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class Economy ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Nos 1172.85 1172.85 4.0 False None None False None False 4691.4 0 4034538 156517 None PWD V- 5 SR 2023-24 Page No-191 It No-16.10 Constructing brick masonry chamber of internal dimension 450x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover.. ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Each 4447.8 4447.8 5.0 False None None False None False 22239.0 0 4034539 156517 None PWD V- 5 SR 2023-24 Page No-191 It No-16.9 Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover.. ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Each 5726.7 5726.7 2.0 False None None False None False 11453.4 0 4034540 156517 None PWD V- 2 SR 2023-24 Page No-123 It No-13.34 Providing and placing on terrace (at all floor levels) polyethylene water storage tank,IS:12701 marked,with cover and suitable locking arrangement and making necessary holes for inlet,outlet and overflow pipes but without fittings and the base support for tank. ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Ltr 9.45 9.45 2000.0 False None None False None False 18900.0 0 1726810185000 0 None None Buildings Electrification 310235.69 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 4034541 156518 None PWD SR V-6 Item No-2.1.1 Electrification: Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet, Short point up to 3Mtr from tapping point to out let via switch ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Point 299.25 299.25 30.0 False None None False None False 8977.5 0 4034542 156518 None PWD SR V-6 Item No-2.1.2 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet, Medium point above 3Mtr up to 6Mtr from tapping point to out let via switch ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Point 413.7 413.7 22.0 False None None False None False 9101.4 0 4034543 156518 None PWD SR V-6 Item No-2.1.3 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet, Long point above 6Mtr up to 10Mtr from tapping point to out let via switch ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Point 598.5 598.5 16.0 False None None False None False 9576.0 0 4034544 156518 None PWD SR V-6 Item No-3.4.1 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall, 1-2Way ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Each 144.9 144.9 21.0 False None None False None False 3042.9 0 4034545 156518 None PWD SR V-6 Item No-3.4.3 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall, 4-5Way ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Each 185.85 185.85 6.0 False None None False None False 1115.1 0 4034546 156518 None PWD SR V-6 Item No-3.4.4 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall, 6Way ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Each 231.0 231.0 2.0 False None None False None False 462.0 0 4034547 156518 None PWD SR V-6 Item No-3.4.5 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall, 8 Way ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Each 274.05 274.05 13.0 False None None False None False 3562.65 0 4034548 156518 None PWD SR V-6 Item No-3.4.6 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall, 10-12Way ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Each 334.95 334.95 4.0 False None None False None False 1339.8 0 4034549 156518 None PWD SR V-6 Item No-3.5.1 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box., 1 to 2 Module ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Each 143.85 143.85 21.0 False None None False None False 3020.85 0 4034550 156518 None PWD SR V-6 Item No-3.5.3 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 4 Module ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Each 183.75 183.75 6.0 False None None False None False 1102.5 0 4034551 156518 None PWD SR V-6 Item No-3.5.4 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 6 Module ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Each 245.7 245.7 2.0 False None None False None False 491.4 0 4034552 156518 None PWD SR V-6 Item No-3.5.5 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 8 Module ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Each 298.2 298.2 13.0 False None None False None False 3876.6 0 4034553 156518 None PWD SR V-6 Item No-3.5.6 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 10-12 Module ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Each 361.2 361.2 4.0 False None None False None False 1444.8 0 4034554 156518 None PWD SR V-6 Item No-3.6.1 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps one way Switch ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Each 107.1 107.1 102.0 False None None False None False 10924.2 0 4034555 156518 None PWD SR V-6 Item No-3.6.3 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps 3way socket ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Each 179.55 179.55 37.0 False None None False None False 6643.35 0 4034556 156518 None PWD SR V-6 Item No-3.6.4 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator Two Module ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Each 374.85 374.85 12.0 False None None False None False 4498.2 0 4034557 156518 None PWD SR V-6 Item No-3.6.7 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 16A One Way Switch ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Each 189.0 189.0 11.0 False None None False None False 2079.0 0 4034558 156518 None PWD SR V-6 Item No-3.6.9 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 32Amps DP switch ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Each 342.3 342.3 6.0 False None None False None False 2053.8 0 4034559 156518 None PWD SR V-6 Item No-3.6.10 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16Amps universal socket ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Each 247.8 247.8 17.0 False None None False None False 4212.6 0 4034560 156518 None PWD SR V-6 Item No-12.2.1 Supplying and fixing one of 230 V Ding dong bell and a flush type bell push with gang box fixed on necessary wooden or rawl plugs using NF screws with Remote. Ding Dong Bell ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Each 258.3 258.3 2.0 False None None False None False 516.6 0 4034561 156518 None PWD SR V-6 Item No-1.13 Supplying And Fixing Metal Fan Box with Round Hook. ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work No 122.85 122.85 12.0 False None None False None False 1474.2 0 4034562 156518 None PWD SR V-6 Item No-1.2.1 Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary 19/20mm dia 2mm thick ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work m 69.3 69.3 80.0 False None None False None False 5544.0 0 4034563 156518 None PWD SR V-6 Item No-1.2.2 Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary 25mm dia 2mm thick ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work m 81.9 81.9 50.0 False None None False None False 4095.0 0 4034564 156518 None PWD SR V-6 Item No-1.1.1 Supplying heavy gauge PVC conduit pipe ....... dia ....... mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted wood plugs in case of RCC ceiling and RCC wall/ stone structure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws. 19/20mm dia 2mm thick ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work m 72.45 72.45 60.0 False None None False None False 4347.0 0 4034565 156518 None PWD SR V-6 Item No-1.1.2 Supplying heavy gauge PVC conduit pipe ....... dia ....... mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted wood plugs in case of RCC ceiling and RCC wall/ stone structure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws. 25mm dia 2mm thick ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work m 85.05 85.05 30.0 False None None False None False 2551.5 0 4034566 156518 None PWD SR V-6 Item No-2.3.2 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:2010 1.5 mm2 ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work m 27.3 27.3 125.0 False None None False None False 3412.5 0 4034567 156518 None PWD SR V-6 Item No-2.3.3 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:2010 2.5 mm2 ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work m 44.1 44.1 200.0 False None None False None False 8820.0 0 4034568 156518 None PWD SR V-6 Item No-2.3.4 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:2010 4 mm2 ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work m 66.15 66.15 100.0 False None None False None False 6615.0 0 4034569 156518 None PWD SR V-6 Item No-5.19.4 Supplying and fixing regular MCB distribution boards on wall/ wood board I flush mounting using required clamps,i bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase I 3 phase I single door with powder coated painting. Made out of 14 SWG MS enclosure I - Single Door 12 Way SP & N ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Each 1956.15 1956.15 2.0 False None None False None False 3912.3 0 4034570 156518 None PWD SR V-6 Item No-5.18.1 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 6-32Amps SP ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Each 435.75 435.75 20.0 False None None False None False 8715.0 0 4034571 156518 None PWD SR V-6 Item No-5.18.4 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 6-32 A DP ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Each 775.95 775.95 1.0 False None None False None False 775.95 0 4034572 156518 None PWD SR V-6 Item No-5.21 Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of percentage leakage current, programmable delay/auto/ manual reset facility suitable to mount on DIN rail/ flush mounting on panel board. ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Each 9717.75 9717.75 2.0 False None None False None False 19435.5 0 4034573 156518 None PWD SR V-6 Item No-5.20.1 Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board. 16-25 A 2 pole ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Each 4490.85 4490.85 2.0 False None None False None False 8981.7 0 4034574 156518 None PWD SR V-6 Item No-11.3.1 Supplying of .....feet -PVC Batten with integrated LED tube .... W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI Greater Than 80. Power Input: 220-240V@ 50/60Hz & Power factor Greater Than0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. LED light fitting 1 x 2' - 9/10 W ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Each 578.55 578.55 6.0 False None None False None False 3471.3 0 4034575 156518 None PWD SR V-6 Item No-11.3.2 Supplying of .....feet -PVC Batten with integrated LED tube .... W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI Greater Than 80. Power Input: 220-240V@ 50/60Hz & Power factor Greater Than0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. LED light fitting 1 x 4' - 20/22 W ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Each 724.5 724.5 29.0 False None None False None False 21010.5 0 4034576 156518 None PWD SR V-6 Item No-11.11.3 Supplying & fixing of retrofit type - LED bulb ...... W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRIGreater Than 70%. efficacy Greater Than80 lumen per W, lifeGreater Than 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF Greater Than 0.95, power loss should lessthan 5% of lamp Wage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. 7W, 6500K ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Each 156.45 156.45 2.0 False None None False None False 312.9 0 4034577 156518 None PWD SR V-6 Item No-11.8.3 Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, maximum light intensity should be between 60 degrees to 70 degrees. CCT Greater Than 5500K, IP66 optical and electrical compartment & impact resistance of complete luminaire Greater Than IK08. Power Factor Greater Than0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mounting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with ........W System Power consumption. LED EfficiencyGreater Than1301m/w, nominal CRI Greater Than75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008. Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/ Lumileds/Osram make LED Source. LED Streetlight 70W ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work No 6291.6 6291.6 2.0 False None None False None False 12583.2 0 4034578 156518 None PWD SR V-6 Item No-6.1 Supplying exhaust fan of 1440 RPM of 300mm (12") size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply. ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Each 1566.6 1566.6 4.0 False None None False None False 6266.4 0 4034579 156518 None PWD SR V-6 Item No-6.3.1 Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double ball bearing system. 48" Sweep (1200mm) Regular model ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Each 3133.2 3133.2 11.0 False None None False None False 34465.2 0 4034580 156518 None PWD SR V-6 Item No-12.46 Supplying & Fixing of 70-150 Watts lamp holder 2 Pin ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Each 66.15 66.15 19.0 False None None False None False 1256.85 0 4034581 156518 None PWD SR V-6 Item No-13.7.1 Fixing all types and all capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling / rafters / girders using 23/0.0076” twin twisted PVC insulated wires, required Nos of round blocks and clamps. On wall / ceiling / Rafter / Girders ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Each 128.1 128.1 37.0 False None None False None False 4739.7 0 4034582 156518 None PWD SR V-6 Item No-13.11 Fixing a ceiling / wall mounting fan of all capacities and all types, with necessary clamps and 'S' hook made out of 15mm dia MS rod, with 5 amps. ceiling rose of approved quality with necessary length of 23 / 0.0076 inch PVC insulated twin twisted wire of approved quality, mounted on a suitable size wooden board and wired. ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Each 330.75 330.75 11.0 False None None False None False 3638.25 0 4034583 156518 None PWD SR V-6 Item No-13.13 Fixing one exhaust fan after making a suitable notch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 A, ceiling rose with sufficient length of 23 / 0.0076 inch PVC insulated twin core wire of approved make with wire mesh and wooden frame. ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Each 742.35 742.35 4.0 False None None False None False 2969.4 0 4034584 156518 None PWD SR V-6 Item No-13.4.1 Supplying and fixing telescopic M.S. bracket fabricated by using 0.5m length 4” dia telescopic M. S. pipe, with 2” dia 1.5m long M. S. bracket and are welded with suitable angle, using 6mm thick M. S. sheet, grip bolts & nuts, as required, suitable for 9 to 12 Mtrs. M. S. tubular pole, with necessary two coats of painting, with all other accessories. Single bracket 1.5 Mtr. Length ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Each 1534.05 1534.05 2.0 False None None False None False 3068.1 0 4034585 156518 None PWD SR V-6 Item No-13.5 Fixing halogen/metal halide / SVL / IL / LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires. ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Each 170.1 170.1 2.0 False None None False None False 340.2 0 4034586 156518 None PWD V-6 It No: 32.03PgNo: 13 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part- 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 10 Sqmm, 4 Core, (10 GI Strips - 4 x 0.8 mm) ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Km 123904.2 123904.2 0.15 False None None False None False 18585.63 0 4034587 156518 None PWD V-6 It No: 20.05 PgNo: 52 Transporting Cable from Store to work spot including loading and unloading (including Crane and other equipment charges if any) LT Cable 2.5 to 25 Sqmm (Single/3.5/4 Core) ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Km 1246.35 1246.35 0.15 False None None False None False 186.9525 0 4034588 156518 None PWD V-6 It No: 21.05PgNo: 52 Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff LT Cable 2.5 to 25 Sqmm ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Km 21930.3 21930.3 0.15 False None None False None False 3289.545 0 4034589 156518 None PWD V-6 It No: 51.01PgNo: 22 GI Grounding pipe, B - Class, 42 mm dia, 2.5 Mtr long, 3.2 mm thick with bolt, nut, GI Strips and washer complete Minimum Weight of GI Pipe: 7.3 Kg ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work No 780.15 780.15 2.0 False None None False None False 1560.3 0 4034590 156518 None PWD V-6 It No: 51.02PgNo: 22 Good Quality well burnt Charcoal for grounding purposes packed in non returnable gunny bag of 30 Kg each ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work No 709.8 709.8 2.0 False None None False None False 1419.6 0 4034591 156518 None PWD V-6 It No: 51.03PgNo: 22 Good Quality Salt for grounding purposes packed in 50 Kg gunny bag ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Bag 325.5 325.5 4.0 False None None False None False 1302.0 0 4034592 156518 None PWD V-6 It No: 1.6.2PgNo: 43 Digging of Pit for providing GI Pipe type Earthing Hard Soil ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Per Pit 3139.5 3139.5 2.0 False None None False None False 6279.0 0 4034593 156518 None PWD SR V-6 Item No-5.42.1 Fabricating supplying and mounting MS box made out ...SWG suitable for floor I wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 2 coats of red oxide primer paint and finally finished with approved colour enameled metal paint etc., complete 14 SWG ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Sq CM 0.53 0.53 10000.0 False None None False None False 5300.0 0 4034594 156518 None PWD SR V-6 Item No-5.40.1 Supplying .........amps rated 3phase with neutral bus bar using required capacity electrolytic aluminum strips covered with heat shrinkable coloured PVC sleeve, mounted on phenoliciFRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete. 100Amps 4x30x6mm Aluminum Strips ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work m 2588.25 2588.25 1.2 False None None False None False 3105.9 0 4034595 156518 None PWD SR V-6 Item No-5.41.1 Supplying and fixing angle iron frame work iabricated out of M.S. angle iron.. and M.S. flat ... with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint 40x40x6mm ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work m 320.25 320.25 2.4 False None None False None False 768.6 0 4034596 156518 None PWD SR V-6 Item No-5.41.4 Supplying and fixing angle iron frame work iabricated out of M.S. angle iron.. and M.S. flat ... with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint 50x100x50x6mm C channel ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work m 793.8 793.8 2.4 False None None False None False 1905.12 0 4034597 156518 None PWD SR V-6 Item No-5.44.2 Supply and Installation /Fixing /Provision of Outdoor type Thermoplastic Modular Panel enclosure with transparent Polycarbonate Lid, shock proof, IP65 (Weather Proof), rust proof, dust proof, water proof, corrosion proof having internally Embedded gasket on both lid and flap suitable to fix Single Phase /Three Phase Energy Meter in suitable base plate and having a provision for Fuse / MCB cut-out with suitable transparent hinged flap opening for operating MCB along with complete tamper proof SEALING facility. 300 mm x 450 mm x 214 mm ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Each 6471.15 6471.15 1.0 False None None False None False 6471.15 0 4034598 156518 None PWD SR V-6 Item No-5.31 Supplying and fixing Electronic Trivector Meter(ETV)suitable For operation LT operationand-CT operatedmeterinpolycarbonatebodyinclass0.5accuracyasperIS14697andcompletely wired. ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Each 4609.5 4609.5 2.0 False None None False None False 9219.0 0 1726810185000 0 None None Buildings Septic Tank 72397.91 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 4034599 156519 None PWD V- 1 SR 2023-24 Page No-5 It No-1.4.1 Septic Tank: Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work. In all kinds of soils Depth upto 1.5 m ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Cum 195.3 195.3 15.56 False None None False None False 3038.868 0 4034600 156519 None PWD V- 1 SR 2023-24 Page No-15 It No-2.1.2 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:4:8 Using 40 mm nominal size graded crushed coarse aggregates ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Cum 5947.2 5947.2 0.72 False None None False None False 4281.984 0 4034601 156519 None PWD V- 1 SR 2023-24 Page No-16 It No-2.3.1 Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. Septic tank ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Cum 7170.28 7170.28 0.52 False None None False None False 3728.5456 0 4034602 156519 None PWD V- 1 SR 2023-24 Page No-16 It No-2.3.1 Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. Walls ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Cum 7303.07 7303.07 2.28 False None None False None False 16650.9996 0 4034603 156519 None PWD V- 1 SR 2023-24 Page No-16 It No-2.3.1 Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. Slab ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Cum 9958.73 9958.73 0.51 False None None False None False 5078.9523 0 4034604 156519 None PWD V- 1 SR 2023-24 Page No-18 It No-2.11.a Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Buildings ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work t 93929.85 93929.85 0.265 False None None False None False 24891.41025 0 4034605 156519 None PWD V- 1 SR 2023-24 Page No-7 It No-1.9 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Cum 279.3 279.3 8.11 False None None False None False 2265.123 0 4034606 156519 None PWD V- 2 SR 2023-24 Page No-41 It No-8.2.2 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Sqm 292.95 292.95 22.2 False None None False None False 6503.49 0 4034607 156519 None PWD V- 2 SR 2023-24 Page No-112 It No-12.96 Providing & fixing fiber glass reinforced plastic (FRP) Door frame of cross section 90mm x 45mm having single rebate of 32mm x 15mm to recieve shutter of 30mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyster resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The fram,e shall be covered with fiber glass form all sides. MS stay shall be provided at the bottom to steady the frame. ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work m 675.15 675.15 2.4 False None None False None False 1620.36 0 4034608 156519 None PWD V- 2 SR 2023-24 Page No-112 It No-12.97.2 Providing and fixing to existing door frames Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames. 35 mm thickness ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Sqm 3816.75 3816.75 0.36 False None None False None False 1374.03 0 4034609 156519 None PWD V- 2 SR 2023-24 Page No-127 It No-13.56 Constructing soak pit 1.20x1.20x1.20 m filled with brickbats including PVC (S.W.R) drain pipe 100 mm diameter and 1.20 m long complete as per standard design. ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Pit 2964.15 2964.15 1.0 False None None False None False 2964.15 0 1726810185000 0 None None Buildings Sump 105794.43 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 4034610 156520 None PWD V- 1 SR 2023-24 Page No-5 It No-1.4.1 Sump: Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work. In all kinds of soils Depth upto 1.5 m ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Cum 254.1 254.1 9.83 False None None False None False 2497.803 0 4034611 156520 None PWD V- 1 SR 2023-24 Page No-15 It No-2.1.2 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:4:8 Using 40 mm nominal size graded crushed coarse aggregates ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Cum 5947.2 5947.2 0.62 False None None False None False 3687.264 0 4034612 156520 None PWD V- 1 SR 2023-24 Page No-16 It No-2.3.1 Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates, Bottom Bed ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Cum 7170.28 7170.28 0.52 False None None False None False 3728.5456 0 4034613 156520 None PWD V- 1 SR 2023-24 Page No-16 It No-2.3.1 Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates, Walls ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Cum 7303.7 7303.7 1.89 False None None False None False 13803.993 0 4034614 156520 None PWD V- 1 SR 2023-24 Page No-16 It No-2.3.1 Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates, Slab ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Cum 9958.73 9958.73 0.57 False None None False None False 5676.4761 0 4034615 156520 None PWD V- 1 SR 2023-24 Page No-18 It No-2.11.a Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Buildings ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work t 93929.85 93929.85 0.24 False None None False None False 22543.164 0 4034616 156520 None PWD V- 1 SR 2023-24 Page No-7 It No-1.9 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Cum 279.3 279.3 4.86 False None None False None False 1357.398 0 4034617 156520 None PWD V- 2 SR 2023-24 Page No-41 It No-8.2.2 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Sqm 292.95 292.95 18.6 False None None False None False 5448.87 0 4034618 156520 None PWD V- 2 SR 2021-22 Page No-133 It No-15.1 Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6kg per m2 to achieve final DFT (dry film thickness) of 1mm including prime coat of epoxy primer @150 g per m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification & with a 10 years warranty on product & work from certified manufacturers as per the direction of the Engineer In charge. ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Kgs 782.25 782.25 37.08 False None None False None False 29005.83 0 4034619 156520 None PWD V- 2 SR 2023-24 Page No-112 It No-12.96 Providing & fixing fiber glass reinforced plastic (FRP) Door frame of cross section 90mm x 45mm having single rebate of 32mm x 15mm to recieve shutter of 30mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyster resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The fram,e shall be covered with fiber glass form all sides. MS stay shall be provided at the bottom to steady the frame. ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work m 675.15 675.15 2.4 False None None False None False 1620.36 0 4034620 156520 None PWD V- 2 SR 2023-24 Page No-112 It No-12.97.2 Providing and fixing to existing door frames Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames. 35 mm thickness ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Sqm 3816.75 3816.75 0.36 False None None False None False 1374.03 0 4034621 156520 None PWD Bal Cir SR 2018-19 Page No-75 It No-11.45 KSRB 12-6.2 : Providing 20mm round M.S footrest and fixing in manhole with M 10 cement concrete block of 20x20x10cms, using 20mm and down size metal of size including cost of materials, labour charges, curing complete as per specifications. Specification No. KBS 12.4.6 ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work Nos 266.7 266.7 4.0 False None None False None False 1066.8 0 4034622 156520 None PWD V- 5 SR 2023-24 Page No-149 It No-13.6.1 Providing, Single Phase Submersible Pump Sets of 100mm dia (4 inch) suitable for bore well confirming to IS 8034-2000 specifications, to work site with testing of as per instructions of engineer incharge of work and latest amendments etc. complete. 1.00 HP/0.75KW 7 STG ---- with all lead and lifts complete as per Specification and as directed by the Engineer in-charge of work No 13983.9 13983.9 1.0 False None None False None False 13983.9 0
generalCriterionList	createdTs version createdDate modifiedDate criterionType description tenderEligibilityCriterionDocumentList 1726810186000 0 None None ELIGIBILITY Tenders from Joint ventures are not acceptable. None 1726810186000 0 None None ELIGIBILITY Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka None 1726810186000 0 None None ELIGIBILITY Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document. None 1726810186000 0 None None ELIGIBILITY It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission. None 1726810186000 0 None None ELIGIBILITY EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection. None 1726810247000 0 None None ELIGIBILITY The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of e-Procurement portal due to internet connectivity issues and technical glitches at bidders end. None 1726810279000 0 None None ELIGIBILITY Bidder shall pay Contract Management Module processing fees of 0.025% of the contact value (Min Rs.500/- & Max Rs.7500/-) soon after contract has been issued to bidder. None 1726810302000 0 None None ELIGIBILITY All the formats prescribed in the bid document shall be filled by the tenderer in complete manner. None 1726810319000 0 None None ELIGIBILITY Royalty on construction materials and other taxes will be deducted as per prevailing Govt., orders as may be modified from time to time. None 1726810341000 0 None None ELIGIBILITY Any discrepancies observed in the documents uploaded by the tenderer the tender shall liable to rejected. None 1726810371000 0 None None ELIGIBILITY Earnest Money Deposit will have to be in any one of the forms as per the instructions in the financial bid document and shall have to be valid for 90 days beyond the validity of the tender. None 1726810390000 0 None None ELIGIBILITY All the formats prescribed in the bid documents shall be filled in complete manner. (section 2 & 3 of the bid document) and shall be uploaded properly, signed by tenderer. Necessary certificates shall be uploaded along with the formats wherever required. General documents section can be used for this purpose. None 1726810407000 0 None None ELIGIBILITY Tenderers are required to read the Bid Documents carefully before submission of their bid. None 1726810427000 0 None None ELIGIBILITY If the tenderer quotes bid price below the estimated contract value (Amount put to tender) then the tenderer has to submit the additional security deposit equal to the difference in cost and the additional security deposit should have a validity for the period of execution. None 1726810445000 0 None None ELIGIBILITY If the numbers of page to be attached in one particular attachment is more, then all the pages can be put into one folder, zipped and then attached or else all the pages can be pasted in one word file and then this word file could be converted to PDF (portable documents format) format and then attached. (Please contract Help Desk for more assistance Phone: 080-25501216/ 25501227) None 1726810462000 0 None None ELIGIBILITY The Contractor shall strictly take all reasonable steps to protect the environment on and off the site and to avoid damage or nuisance to persons or to property of the public or others resulting from pollution, noise or other causes arising as a consequence of his methods of operation. None 1726810475000 0 None None ELIGIBILITY Materials like, steel, cement, bitumen etc., required for the work shall be procured by the tenderer themselves and should got tested positive by the quality control authority before use on the work. None 1726810493000 0 None None ELIGIBILITY Total value of Civil Engineering Construction works executed in the and payments received in the last five year i.e. , 2019-20 , 2020-21, 2021-22, 2022-23 and 2023-24. None 1726810550000 0 None None ELIGIBILITY The Defects Liability Period is 1 (one) year from the date of completion of the work including Maintenance. None 1726810571000 0 None None ELIGIBILITY The Tenderers are bound to furnish the original certified documents to the employer within Three days from the day of opening of technical bid for verification, failing which the bid of tenderer will be considered as technically non responsive. None 1726810597000 0 None None ELIGIBILITY Refer Special Instructions to tenderers in bid document. None 1726810640000 0 None None ELIGIBILITY The Bidder belonging to the schedule caste/schedule Tribe shall be Domicile of the State of Karnataka for more than 10 years. None 1726810665000 0 None None ELIGIBILITY The eligible tenderers belonging to Schedule Caste/schedule Tribe should upload Schedule Caste/schedule Tribe certificate issued by Tahasildar /competent authority and the certificate should be duly attested by Gazetted Officer. None 1726810814000 0 None None ELIGIBILITY The concrete item rate inclusive of formwork. None 1726810881000 0 None None ELIGIBILITY Stipulated Period of completion 6 Months including Monsoon season. None 1726810988000 0 None None ELIGIBILITY List of Minimum Key Personnel to be deployed by the contractor at site for Contract work.Sl. No. Position Qualification No. of persons 1 Site Engineer (Civil) B.E. Civil with minimum experience of 7 years in the Construction of buildings or Diploma in Civil Engineering with minimum experience of 10 years in the Construction of buildings and should have been working in permanent role of the organization for at least two years 1 (One) 2 Site Engineer (Electrical Engineer) B.E. Electrical with minimum experience of 5 years in the Construction of buildings or Diploma in Electrical Engineering with minimum experience of 10 years in the Construction of buildings and should have been working in permanent role of the organization for at least two years 1 (Two) None
preQualCriterionList	None
technicalCriterionList	createdTs version createdDate modifiedDate description criterionCategoryText criterionTypeOthersValue tenderTechnicalCriterionDocumentList None None None None To qualify for award of this contract, each tenderer in its name should have in the last five years i.e.(2019-2020 to 2023-2024) b) Satisfactorily completed as prime contractor, at least one any construction work of value not less than of Rs. 13.67 Lakhs (25% of the cost of the work). Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None To qualify for award of this contract, each tenderer in its name should have in the last five years i.e.(2019-2020 to 2023-2024) (c) Executed in any one year at least one similar work, the following minimum quantities of work Executed in any one year at least one similar work, the following minimum quantities of work: Sl. No, Description of works, Quantity, 1)PCC/RCC:117.00 Cum, 2)TMT Steel:8.20 Tonnes,3)Plaster:1104.00 Sqm, 4)Painting:1015.00 Sqm, 5)Flooring/Wall Tiles:197.00 Sqm Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None To qualify for award of this contract, each tenderer in its name should have in the last five years i.e. (2019-2020 to 2023-2024) d) The Tenderer or his identified sub-contractor should possess required valid electrical license issued by competent authority for executing building electrification works and should have executed similar electrical works totaling Rs.0.78 Lakhs in any one year. Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None To qualify for award of this contract, each tenderer in its name should have in the last five years i.e. (2019-2020 to 2023-2024) e) The Tenderer or his identified sub-contractor should possess valid license issued by competent authority for executing water supply/sanitary engineering works and should have executed similar water supply/sanitary engineering works totaling Rs.0.45 Lakhs in any one year. Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under Assessed available tender capacity( AXNX5.00- B )where A Maximum value of civil engineering works executed in any one year during the last five years 2019-20 to 2023-24 (updated to 2023-24 price level) taking into account the completed as well as works in progress. N Number of years prescribed for completion of the works for which tenders are invited. B Value, at 2023-24 price level, of existing commitments and on-going works to be completed during the next 6 months (period of completion of the works for which Tenders are invited) Note: (1)The statements showing the value of existing commitments and on-going works as well as the Stipulated period of completion remaining for each of the works listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent.(2)Tenderer shall submit the list of Ongoing works duly certified by the Auditor/Chartered Accountant. Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Bid Capacity None None None None To qualify for award of this contract, each tenderer in its name should have in the last five years i.e.(2019-2020 to 2023-2024) a) achieved in at least one financial year a minimum financial turnover (in all classes of civil engineering construction works only) of Rs. 54.66 Lakhs. Financial Status None createdTs version createdDate modifiedDate documentName None None None None Audited CA Certificate of Annual Turnover None None None None Each Tenderer should further demonstrate: Liquid assets and /or availability of credit facilities of not less than Rs. 16.40 Lakhs (Credit lines/letter of credit/ certificates from banks for meeting the fund requirement etc. Financial Status None createdTs version createdDate modifiedDate documentName None None None None Line of Credit None None None None Contractor Registration Certificate Others Registration Certificate createdTs version createdDate modifiedDate documentName None None None None PWD Registration Certificate (Class I/II/III/IV)
tenderCriterionDocumentList	documentName optional documentTypeText Annual Turnover Certificate Certified by Chartered Accountant True Technical Bid Contractor Registration Certificate True Technical Bid The eligible tenderers belonging to Schedule caste / Schedule Tribe should upload Schedule Caste/ Schedule Tribe Certificate issued by Tahasildar /competent authority and the certificate should be duly attested by Gazetted Officer. True Technical Bid The Bidder belonging to the schedule caste/ Schedule Tribe shall be Domicile of the State of Karnataka for more than 10 years. True Technical Bid Workdone certificate issued by the Officer not below the rank of Executive Engineer True Technical Bid Tenderer should have latest GST Registration, PAN Card in their name True Technical Bid
tenderWorkLocationList
tenderAddress	None
tenderRecallDTO	None