createdTs	None
version	None
createdDate	None
modifiedDate	None
noticeInvitingTenderDTO	createdTs 1726841955036 version 3 createdDate None modifiedDate None tenderType RFQ evaluationType ONE_COVER evaluationTypeText One Cover invitingStrategy OPEN invitingStrategyText Open taxType INCLUSIVE_TAX tenderFee 730.00 emd 72029.00 bidValueType ITEM_WISE bidValueTypeText Item wise tenderReceiptClose 30-09-2024 17:30:00 tenderQueryClose 27-09-2024 17:30:00 technicalBidOpen None publishedDate 21-09-2024 14:50:46 publishedByPost RDPR_EE_DIV_BGK publishedByUser KPE18661 - MALLANAGOUDA R BIRADAR bidValidityPeriod 90 noOfCalls 1 preBidMeetingDate None preBidMeetingYn False preQualificationBidOpen None denominationType RUPEES denominationTypeText Rupees retenderedYn None percentageRateTypeText None contactPerson EE PRED BAGALKOTE splitEmdRequiredYn False emdBankGuarantee None emdCash None bgValidityPeriod None hideWeightage None multipleCurrencySelectionAllowedYn False isTechWeightageAllowed False highestBidderSelection False isVariableEmdAllowed None qcbsTenderYn None itemwiseEmdRequiredYn None sampleSubmissionDate None officeNumber 08354235042 mobileNumber 8660966508 tenderSupplierList None
tenderSchedule	createdTs 1726841955073 version 4 createdDate None modifiedDate None tenderNumber RDPR/2024-25/BD/WORK_INDENT8779 title CONSTRUCTION OF SCHOOL BUILDING 1 ROOM 1LADIES TOILET 1 BOYS TOILET AND 1 CWSN TOILET FOR GOVT HIGH SCHOOL YALLATTI RABAKAVI BANAHATTI TALUKA description SCHOOL ROOM AND TOILET BLOCKS AT HS YALLATTI category WORKS categoryText Works ecv 2881169.13 deptName Rural Development and Panchayat Raj Department status PUBLISHED statusText Published remarks None csrValue None ecvtenderYn True location 796 locationName RDPR Division Office Bagalakote provisionalAmount 2890000.0 groupOverheadTotal 439500.38 fileNumber YALLATTI
tenderSubEstimateList	createdTs version createdDate modifiedDate workCategoryName subEstimateName estimateTotal itemList 1726841955000 0 None None Buildings CONSTRUCTION OF SCHOOL BUILDING 1 ROOM 1LADIES TOILET 1 BOYS TOILET AND 1 CWSN TOILET FOR GOVT HIGH SCHOOL YALLATTI RABAKAVI BANAHATTI TALUKA 2441668.75 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 4042410 156887 None PWD SR2023-24 Vol-II PAGE NO- 187ITEM NO-19.9.2 Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineerin- charge. In cement mortar Cum 1768.2 1768.2 12.95 False None None False None False 22898.19 0 4042411 156887 None PWD CSR 2023-24 Vol -1 P.No.8 I.No 1.4.1 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work Cum 254.1 254.1 45.19 False None None False None False 11482.779 0 4042412 156887 None PWD CSR 2023-24 Volume -1 Pg.No 15. I.No 2.1.2 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:4:8 (M5) Using 40 mm nominal size graded crushed coarse aggregates Cum 5947.2 5947.2 11.02 False None None False None False 65538.144 0 4042413 156887 None PWD SR 2023 24 VoL -II P No 7 I No 1.90 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. Cum 279.3 279.3 60.29 False None None False None False 16838.997 0 4042414 156887 None PWD CSR 2023-24 Volume -1 Pg No 17. I.No 2.2.1.1 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 7129.46 7129.46 7.38 False None None False None False 52615.4148 0 4042415 156887 None PWD CSR 2023-24 Volume -1 P.No 17. I.No 2.4.2 ) Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 11286.56 11286.56 1.34 False None None False None False 15123.9904 0 4042416 156887 None PWD CSR 2023-24 Volume -1 P.No 17. I.No 2.4.2 ) Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 9958.73 9958.73 4.38 False None None False None False 43619.2374 0 4042417 156887 None PWDCSR2023 24Volume1P.No17I.No 2.5.1 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 11834.55 11834.55 2.61 False None None False None False 30888.1755 0 4042418 156887 None PWD CSR 2023-24 Volume -1 P.No 17. I.No 2.5.1 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 11138.4 11138.4 5.39 False None None False None False 60035.976 0 4042419 156887 None PWD CSR 2023-24 Volume -1 P.No 17. I.No 2.5.1 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 10442.25 10442.25 9.71 False None None False None False 101394.2475 0 4042420 156887 None PWD CSR 2023-24 Volume -1 P.No 17. I.No 2.5.1 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 10094.18 10094.18 0.2 False None None False None False 2018.836 0 4042421 156887 None PWD CSR 2023-24 VOLUME 1 P. NO 18 I NO 2. Providing Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent members whereever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. (The laps and wastages shall not be measured separately Kg 93.93 93.93 1945.32 False None None False None False 182723.9076 0 4042422 156887 None PWD CSR 2023-24 Volume -2 P No 9 I No 5.4 Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with :Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 6708.45 6708.45 14.92 False None None False None False 100090.074 0 4042423 156887 None PWD CSR 2023-24 Volume 2 P.No-14 I.No-6.8 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. Cum 8367.45 8367.45 24.5 False None None False None False 205002.525 0 4042424 156887 None PWD CSR 2023-24 Volume -2 P.No-41 I.No-8.1.2 Providing 20 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge Sqm 371.7 371.7 312.94 False None None False None False 116319.798 0 4042425 156887 None PWD CSR 2023-24 Volume -2 P.No- 41 I.No-8.1.2 Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge Sqm 253.05 253.05 70.85 False None None False None False 17928.5925 0 4042426 156887 None PWD CSR 2023-24 Volume -2 Page No-42 I.No-8.7 Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge Sqm 384.3 384.3 81.48 False None None False None False 31312.764 0 4042427 156887 None PWD CSR 2023-24 Vol -2 P.No-60 I.No-9.12.2) Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm Sqm 1202.25 1202.25 74.25 False None None False None False 89267.0625 0 4042428 156887 None PWD CSR 2023-24 Volume 2 P.No-100 I.No-12.12 Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps ), but including cost of materials, labour, usage charges complete as per specifications. Cum 130412.1 130412.1 0.49 False None None False None False 63901.929 0 4042429 156887 None PWD CSR 2023-24 Volume -2 P.No-85 I.No-11.34A Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding Kg 176.4 176.4 151.2 False None None False None False 26671.68 0 4042430 156887 None PWD CSR 2023-24 Volume -2 P.No-100 I.No-12.15 Providing and fixing in position fully panelled Honne wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. ( excluding cost of fixtures ) Sqm 7816.2 7816.2 4.4 False None None False None False 34391.28 0 4042431 156887 None PWD CSR 2023-24 Volume -2 P.No-101 I.No-12.23 Providing and fixing in position Honnewood fully panelled shutters for windows with stiles and rails of 35mm. thick, 75mm wide in two halves with panels of 25mm thick including cost of materials, labour charges, usage charges complete as per specifications. (excluding cost of fixtures) Sqm 7952.7 7952.7 6.16 False None None False None False 48988.632 0 4042432 156887 None PWD CSR 2023-24 Volume -2 P.No-50 I.No-8.51 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge Sqm 105.0 105.0 152.33 False None None False None False 15994.65 0 4042433 156887 None PWD CSR 2023-24 Volume 2 P.No-45 I.No-8.25 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge Sqm 143.85 143.85 344.67 False None None False None False 49580.7795 0 4042434 156887 None PWD CSR 2023-24 Vol -2 P.No- 48 I.No-8.40 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge Sqm 120.75 120.75 27.54 False None None False None False 3325.455 0 4042435 156887 None PWD CSR 2023-24 Vol -3 P.No- M -056a PVC Pipe 110mm Outer Dia at 2 kg Per Sqcm. Rmtr 162.75 162.75 16.0 False None None False None False 2604.0 0 4042436 156887 None PWD CSR 2023-24 Vol -2 P.No- 23 I.No-7.24 Providing and fixing 12 m thick flat pressed 3 layer medium density particle board or graded particle board (Grade I) IS:3087 marked, in ceiling with necessary nails etc.complete Each 785.4 785.4 1.0 False None None False None False 785.4 0 4042437 156887 None PWD SR 2023-24 Volu II I.NO11.26.1 P.NO- 82 Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying Kg 138.0 138.0 89.38 False None None False None False 12334.44 0 4042438 156887 None PWD CSR 2023-24 Vol -1 P.No.8 I.No 1.4.1) Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In all kinds of soils Depth upto 1.5 m Cum 254.1 254.1 58.92 False None None False None False 14971.572 0 4042439 156887 None PWD CSR 2023-24 Volume -1 Pg.No 15. I.No 2.1.2 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:4:8 (M5) Using 40 mm nominal size graded crushed coarse aggregates Cum 5947.2 5947.2 4.52 False None None False None False 26881.344 0 4042440 156887 None PWD CSR 2023-24 Volume -2 P No 9 I No 5.4 Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with :Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand Cum 6708.45 6708.45 18.79 False None None False None False 126051.7755 0 4042441 156887 None PWD CSR 2023-24 Volume -2 P No 7 I No 1.9 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m Cum 279.3 279.3 11.97 False None None False None False 3343.221 0 4042442 156887 None PWD CSR 2023-24 Volume 2 P.No-14 I.No-6.8 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work Cum 8367.45 8367.45 30.47 False None None False None False 254956.2015 0 4042443 156887 None PWD CSR 2023-24 Volume -1 P.No 17. I.No 2.5.1 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 10442.25 10442.25 10.35 False None None False None False 108077.2875 0 4042444 156887 None PWD CSR 2023-24 Volume -1 P.No 17. I.No 2.5.1 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 11138.4 11138.4 0.79 False None None False None False 8799.336 0 4042445 156887 None PWD CSR 2023-24 Volume -1 P.No-18 I.No-2.11 Providing Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.Cwork including straightening,cutting, bending, placing in position, binding and anchoring to adjacent members whereever necessary complete as per Design including costof material, labour, usage charges complete as per specifications. (The laps and wastages shall not be measured separately) Kg 93.93 93.93 501.37 False None None False None False 47093.6841 0 4042446 156887 None PWD CSR 2023-24 Volume -2 P.No-41 I.No-8.2.2 Providing 15 mm cement plaster on the rough side of single or half brickwall of mix :1:6 (1 cement: 6 fine sand) including rounding off cornerswherever required smooth rendering, providing and removing scaffolding,including cost of materials, labour, curing complete as per specificationsand as per directions of Engineer-in-charge Sqm 292.95 292.95 398.52 False None None False None False 116746.434 0 4042447 156887 None PWD CSR 2023-24 Vol -2 P.No-60 I.No-9.12.2) Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm Sqm 1202.25 1202.25 44.32 False None None False None False 53283.72 0 4042448 156887 None PWD SR 2023-24 Vol-2 Page No.65 tem No.9.38) Providing skirting, dadooing, rises of steps with white glazed tiles 6mmthick on 10mm thick cement plaster 1:3 and jointed with white cementslurry over existing rough plaster surface using glazed tiles of approvedmake and size including cost of materials, labour, complete as persp ecifications Sqm 1461.6 1461.6 22.19 False None None False None False 32432.904 0 4042449 156887 None PWD SR 2023-24 Vol-2 Page No.134 tem No.14.13.1 Providing and fixing white vitreous china water closet squatting pan (Indian type) : Long pattern W.C. pan of size 580 mm Each 1499.4 1499.4 4.0 False None None False None False 5997.6 0 4042450 156887 None PWD SR 2023-24 Vol-2 Page No.131 tem No.14.3.1) Providing and fixing white vitreous china pedestal type water closet(European type) with seat and lid, 10 litre low level white vitreous chinaflushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flushbend, overflow arrangement with specials of standard make and mosquitoproof coupling of approved municipal design complete, includingpainting of fittings and brackets, cutting and making good the walls and floors wherever requiredW.C. pan with ISI marked white solid plastic seat and lid Each 6275.85 6275.85 1.0 False None None False None False 6275.85 0 4042451 156887 None PWD SR 2023-24 Vol-2 Page No.86 tem No.11.34B) Providing and fixing M.S. grills of required pattern in frames of windowsetc. with M.S. flats, square or round bars etc. including priming coat withapproved steel primer all complete. Fixed to openings /wooden frameswith rawl plugs screws etc Kg 192.15 192.15 136.08 False None None False None False 26147.772 0 4042452 156887 None PWD SR 2023-24 Vol-2 Page No.104 tem No.12.54) Providing & fixing factory made PVC Door frame of size 50x47mm witha wall thickness of 5mm, made out of extruded 5mm rigid PVC foamsheet metered cut at corners & jointed 2 No.s of 150m long bracketsof 15x15mm M.S Square tube, the entire door frame to be reinforced with19x19mm M.S Square tube of 19 gauge. The door frame to be fixed to thewall using M.S. Screws of 65/80mm size complete as per manufacturersspecification & direction of Engineer-in-charge m 333.9 333.9 29.0 False None None False None False 9683.1 0 4042453 156887 None PWD SR 2023-24 Vol-2 Page No.104 tem No.12.55.1 Providing & fixing 30mm thick factory made rigid foam Prelam PanelledDoor Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and15x15mm for top & bottom rails, covered with heat moulded PrelaminatedPVC C Channel of 5mm thick sheet & 30x50mm wide to form stiles & 5mmthick & 75mm wide Prelaminated PVC Sheets for top rail, lock rail & bottomrail on either side & 5mm thick, 20mm wide cross PVC sheet as gap insertfor top rail & bottom rail, Panelling of 5mm thick PVC sheet Prelaminatedon either side fitted in the M.S. frame, Sealed to the stiles & rails with PVCDesigner beading on either side & joined together with solvent cementadhesive etc., Complete as per manufacturersspecification & direction ofEngineer-in-charge fixed to frames with 3 nos of 75mm Aluminium hinges Sqm 2484.3 2484.3 8.19 False None None False None False 20346.417 0 4042454 156887 None PWD SR 2023-24 Vol-2 Page No.77 tem No.11.3) Providing and fixing in position collapsible steel shutters with verticalchannels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size,with top and bottom rail of T-iron 40x40x6 mm, with 40 mm diasteel pulleys, complete with bolts, nuts, locking arrangement, stoppers,handles, including applying a priming coat of approved steel primerincluding cost of materials ,labour, usage charges of machinery completeas per specifications and as per directions of the Engineer-in-Charge Sqm 8689.8 8689.8 5.04 False None None False None False 43796.592 0 4042455 156887 None PWD SR 2023-24 Vol-2 Page No.107 tem No.12.73.1 Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992with necessary screws etc. complete 125mm Each 46.2 46.2 4.0 False None None False None False 184.8 0 4042456 156887 None PWD SR 2023-24 Vol-2 Page No.107 tem No.12.72) Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barreltype) with necessary screws etc. complete Each 86.1 86.1 4.0 False None None False None False 344.4 0 4042457 156887 None PWD SR 2023-24 Vol-2 Page No.107 tem No.12.60) Providing and fixing chromium plated brass 100 mm mortice latch and lockwith 6 levers and a pair of lever handles of approved quality with necessaryscrews etc. complete Each 1104.6 1104.6 8.0 False None None False None False 8836.8 0 4042458 156887 None PWD SR 2023-24 Vol-2 Page No.107 tem No.12.74.1 Providing and fixing IS : 12817 marked stainless steel butt hinges withstainless steel screws etc. complete :125x64x1.9mm Each 107.1 107.1 5.0 False None None False None False 535.5 0 4042459 156887 None PWD SR 2023-24 Vol-2 Page No.64 tem No.9.36) Providing flooring with 25mm thick polished Cuddapah slabs using cementmortar 1:6, 25mm thick over existing cement concrete bed or top of rooflaid to line and level and jointed with cement slurry mixed with pigmentto match the shade of the slab , including cost of materials, labour, curing,polishing complete as per specifications Sqm 1732.5 1732.5 8.64 False None None False None False 14968.8 0 4042460 156887 None PWD SR 2023-24 Vol-2 Page No.132 tem No.14.7.2) Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillartaps, 32 mm C.P. brass waste of standard pattern, including painting offittings and brackets, cutting and making good the walls wherever require. White Vitreous China Wash basin size 630x450 mm with a single 15 mmC.P. brass pillar tap Each 2689.05 2689.05 10.0 False None None False None False 26890.5 0 4042461 156887 None PWD SR 2023-24 Vol-2 Page No.117 tem No.13.2.2) Providing and fixing brass bib cock of approved quality :20 mm nominal bore Each 320.25 320.25 10.0 False None None False None False 3202.5 0 4042462 156887 None PWD SR 2023-24 Vol-2 Page No.118 tem No.13.8.2 Providing and fixing unplasticised PVC connection pipe with brass unions Each 115.5 115.5 10.0 False None None False None False 1155.0 0 4042463 156887 None PWD SR 2023-24 Vol-2 Page No.45 tem No.8.28) Finishing walls with water proofing cement paint of required shade :Newwork (Two coats applied @ 4.84 kg/10 m²) to give an even shade afterthoroughly brooming the surface to remove all dirt, dust, mortar dropsand foreign matter including preparing the surface even and sand papersmooth, cost of materials, labour complete as per specifications and as perdirections of Engineer-in-charge Sqm 93.45 93.45 398.52 False None None False None False 37241.694 0 4042464 156887 None PWD SR 2023-24 Vol-2 Page No.123 tem No.13.34) Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable lockingarrangement and making necessary holes for inlet, outlet and overflowpipes but without fittings and the base support for tank Ltr 9.45 9.45 500.0 False None None False None False 4725.0 0 4042465 156887 None P No 2 I No 1.2.1) Concealed Conduit System Supplying heavy gauge PVC conduit pipe ……mm dia .mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary. 19/20mm dia 2mm thick Mtr 40.0 40.0 30.0 False None None False None False 1200.0 0 4042466 156887 None P No 2 I No 1.3.1) Supplying heavy gauge PVC Conduit Pipe ….dia .mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering up to the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary.19/20mm dia 2mm thick Mtr 51.0 51.0 15.0 False None None False None False 765.0 0 4042467 156887 None P No 3 I No 1.6.3) Supplying and flush mounting teak wooden box without front plank, made of not less than 12mm thick wood. After due groove cutting, necessary masonary patch work complete.10''x7''x3 (254x178x76mm No 77.0 77.0 2.0 False None None False None False 154.0 0 4042468 156887 None P No 5 I No 2.1.1) Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit / casing capping using 1100V grade, COPPER conductor flexible multistrand FRLS PVC insulated, 2 X1.5Sq.mm Cable confirming to the GTP, with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet / gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. GROUP A.Short point upto 3Mtr from tapping point to out let via switch Point 200.0 200.0 8.0 False None None False None False 1600.0 0 4042469 156887 None P No 5 I No 2.1.2) Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit / casing capping using 1100V grade, COPPER conductor flexible multistrand FRLS PVC insulated, 2 X1.5Sq.mm Cable confirming to the GTP, with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet / gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. GROUP A.Medium point above 3M. upto 6M from tapping point to out let via switch Point 275.0 275.0 5.0 False None None False None False 1375.0 0 4042470 156887 None P No 5 I No 2.1.3) Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit / casing capping using 1100V grade, COPPER conductor flexible multistrand FRLS PVC insulated, 2 X1.5Sq.mm Cable confirming to the GTP, with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet / gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. GROUP A.Long point above 6Mtr upto 10Mtr from tapping point to out let via switch Point 400.0 400.0 2.0 False None None False None False 800.0 0 4042471 156887 None P.No. 5, I.No. 2.3.1) Wiring for lighting/power circuit using one of PVC insulated 1100V grade, multis and Copper conductor single core cable in open or consealed system of wiring. Using Class 'A' approved materials.1 sqmm Mtr 14.0 14.0 20.0 False None None False None False 280.0 0 4042472 156887 None P.No. 5&6, I.No. 2.3.3) Wiring for lighting/power circuit using one of PVC insulated 1100V grade, multis and Copper conductor single core cable in open or consealed system of wiring. Using Class 'A' approved materials.2.5 sqmm Mtr 32.0 32.0 50.0 False None None False None False 1600.0 0 4042473 156887 None P.No. 5&6, I.No. 2.3.4) Wiring for lighting/power circuit using one of PVC insulated 1100V grade, multis and Copper conductor single core cable in open or consealed system of wiring. Using Class 'A' approved materials.4 sqmm Mtr 45.0 45.0 20.0 False None None False None False 900.0 0 4042474 156887 None P No 9 I No 3.1.2 ) Supply 6A flush/projected type socket and a 6 amps flush/ projected type SP switch either surface/flush mounting in a existing gang box or in a 4mm thick plastic sheet and fixing over a flush monted wooden box and wiring using necessary capacity wires as required.6 Amps 3/5 Way No 132.0 132.0 10.0 False None None False None False 1320.0 0 4042475 156887 None P No 10 I No 3.6.10) Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.32 Amps DP switch No 182.0 182.0 2.0 False None None False None False 364.0 0 4042476 156887 None P No 10 I No 3.6.11) Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6/16Amps Univerals socket No 162.0 162.0 4.0 False None None False None False 648.0 0 4042477 156887 None P No 10 I No 3.6.4) Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.Electronic stepped regulator. No 290.0 290.0 2.0 False None None False None False 580.0 0 4042478 156887 None P No 10 I No 3.9) Supplying and fixing hylum plastic sheet 3mm thick with necessary nitches for fixing switches, regulators etc., and fixing on existing wood or metal box using N.F. screws Sq CM 0.24 0.24 1200.0 False None None False None False 288.0 0 4042479 156887 None P.No. 10, I.No. 3.10.1) Extra for supplying 4mm thick white plastic plate and covering for junction boxes of size ……mm conduit using necessary machine screws.80mm No 9.0 9.0 6.0 False None None False None False 54.0 0 4042480 156887 None P.No. 10, I.No. 3.10.2 Extra for supplying 4mm thick white plastic plate and covering for junction boxes of size ……mm conduit using necessary machine screws.110mm No 11.0 11.0 2.0 False None None False None False 22.0 0 4042481 156887 None P No 65 I No 12.5.2) Supply of round/square recess/surface mounted rolling type LED Down light with W GU 10 LED Lamp Rib Fabricated from Die cast aluminium with white powder coated prewired to mains connector & has swiveling unit of aluminium die cast eye ball & LED Lamp position retained square or round down light 10-12W No 768.0 768.0 4.0 False None None False None False 3072.0 0
generalCriterionList	createdTs version createdDate modifiedDate criterionType description tenderEligibilityCriterionDocumentList 1726841956000 0 None None ELIGIBILITY Tenders from Joint ventures are not acceptable. None 1726841956000 0 None None ELIGIBILITY Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka None 1726841956000 0 None None ELIGIBILITY Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document. None 1726841956000 0 None None ELIGIBILITY It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission. None 1726841956000 0 None None ELIGIBILITY EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection. None 1726841956000 0 None None ELIGIBILITY Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs) None 1726841956000 0 None None ELIGIBILITY Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender) None 1726841956000 0 None None ELIGIBILITY Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year None 1726841956000 0 None None ELIGIBILITY Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year None 1726841956000 0 None None ELIGIBILITY Total value of civl engineering works executed and payments received in the last five years (year-wise) None 1726841956000 0 None None ELIGIBILITY List of existing commitments and ongoing works None 1726841956000 0 None None ELIGIBILITY List of works for which tenders already submitted None 1726841956000 0 None None ELIGIBILITY Banker Details for reference None 1726841956000 0 None None ELIGIBILITY Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded None 1726841956000 0 None None ELIGIBILITY Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years None 1726841956000 0 None None ELIGIBILITY Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded None 1726841956000 0 None None ELIGIBILITY Proposals for subcontracting components of works amounting to more than 20% of the contract price (for each, the qualifications and experience of the identified sub-contractor in the relevant fields should be attached) None 1726909792000 0 None None ELIGIBILITY The Tenderer shall obtain the workdone certificate in the prescribed format from the Competent Authority not below the rank of Executive Engineer(District Level Officer)and scan the Original Certificate and attach the scanned file to the Bid. None 1726909800000 0 None None ELIGIBILITY All the documents to be uploaded shall be neatly scanned and the documents scanned shall be in original. None 1726909806000 0 None None ELIGIBILITY The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders The departments shall not be responsible for non accessibility of KPPP portal due to internet connectivity issues and technical glitches at bidders end None 1726909811000 0 None None ELIGIBILITY All materials required for the work shall be procured by the tenderer himself and should be got tested by the quality control authorities at his own cost before use on work. None 1726909819000 0 None None ELIGIBILITY Acceptence / Cancellation of the works are reserved by under signed without any reasons for the same. None 1726909826000 0 None None ELIGIBILITY If any date in the tender time table is government holiday, next working date will be considered None 1726909835000 0 None None ELIGIBILITY Incomplete / conditional tenders will not be accepted. None 1726909842000 0 None None ELIGIBILITY Tenderer must submit his present accurate postal address and phone / cell phone number None 1726909846000 0 None None ELIGIBILITY The cost of the Tender form shall not be refundable. None 1726909849000 0 None None ELIGIBILITY Unique Document Identification Number (UDIN) from Practicing Chartered Account Must Preferred None 1726909853000 0 None None ELIGIBILITY Work shall be executed as per KTPP Act & KW-1&2 Conditions. None 1726909856000 0 None None ELIGIBILITY The Rates Quoted In The Estimates Are Exclusive of GST Taxes. None 1726909860000 0 None None ELIGIBILITY The GST will be Paid Separately to the Contractors as per the Guidelines of the Government Time to Time. None 1726909863000 0 None None ELIGIBILITY Successful bidder submitting bids below the amount put to tender will be regularized to submit the difference amount in the form of FDR/TDR/DD/Pledge on the name of EE PRED Bagalkote within 20 days from the date of receiving the letter of acceptance. additional security paid for unbalanced tenders Failing which EMD will be forfeited and further action will be taken as per G O No FD PCL 2008 Bangalore Dated 14/10/2008. None 1726909867000 0 None None ELIGIBILITY As per Government order No. FD 56 PWD cell 2004, Bngalore, 18th Janury 2005, The contractor shall be made responsible for submiting e-bills duly suported the hard copy of detailed measurements of work. using electrinic spreadsheets and making computation thereof. The conctractor shall submit diskette/ CD room in addition the hard copy. None 1726909871000 0 None None ELIGIBILITY The tenderers must submit the scanned documents in pdf / jpeg form, not in other form and which are should not be corrupted files. If it shows errors while opening the documents the employer is not responsible. Hence the such files will be considerd as un submitted. None 1726909875000 0 None None ELIGIBILITY To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e., 2019-20, 2020-21, 2021-22 2022-23 & 2023-24 Achieved in at least two financial years a minimum financial turnover in all classes of civil engineering construction works only of Amount Put Tender (Turn over With compulsory UDIN Number) (in all classes of civil engineering construction works only) None 1726909881000 0 None None ELIGIBILITY The Tenderer shall obtain similar the workdone certificate Construction of Similer nature Works within the financial years of 2019-20 to 2023-24 (50% of the Amount Put to Tender) i.e in the prescribed format from the Competent Authority not below the rank of Executive Engineer(District Level Officer) and scan the Original Certificate and attach the scanned file to the Bid. None 1726909906000 0 None None ELIGIBILITY This work is Randomized as OTHERS Category. Hence any Category of Contractor can bid. None 1726909913000 1 None None ELIGIBILITY Tenderers must have valid PRED/PWD registration CLASS-2 AND ABOVE and must submit PRED/PWD registration copy. None 1726909919000 0 None None ELIGIBILITY Single Tender Will Not Be Accepted None 1726909924000 0 None None ELIGIBILITY NOTE : ONLY RELEVANT SCANNED COPY OF THE ORIGINAL DOCUMENT TO BE ATTACHED FOR THE CORRESPONDING CONDITIONS MENTIONED. None 1726909928000 0 None None ELIGIBILITY Period for completion of work is 4 Months None 1726909932000 0 None None ELIGIBILITY The Project Completion period is 4 Months and the defect liability period of the work is (2) TWO year after successful completion of the work. (including Monsoon). None 1726909939000 0 None None ELIGIBILITY Tenderer must submit copies of documents according to KW-1&2 document None 1726909945000 0 None None ELIGIBILITY Lot No: 4876 Sl No 16 Others None
preQualCriterionList	None
technicalCriterionList	None
tenderCriterionDocumentList	documentName optional documentTypeText PRED/KPWD CLASS-II AND ABOVE Registration Certificate True Technical Bid Tenderer must Submit PAN & GST Certificate True Technical Bid Tenderer must have of value 2019-20, 2020-21, 2021-22, 2022-23 to 2023-24 satisfactorily completed as a prime contractor at least one Similar nature of work/Const of Building work of 50PERCENT of the Amount Put to Tender Percent of not less than Rs.14.41 lakhs issued by the officer not below the rank of Executive Engineer For Similer nature/Building works work done certificate with works shoud be produced Workdone with indent No True Technical Bid Work orders / commitments of ongoing works issued by an officer not below the rank of Executive Engineer True Technical Bid To qualify for award of this contact each tenderer in his name should have in the 2019-20 to 2023-24 years period achieved in at least two financial years an average financial turnover of Rs.24.42 Lakhs usually not less than amount put to tender from C.A. on Letter Head with UDIN No. otherwise bid will be directly disqualified True Technical Bid Accurate postal address and phone / cell phone number True Technical Bid Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under Assessed available tender capacity A X N X 2.5 - B True Technical Bid Contractor Should submit the difference amount as per the CSR 2023-24 & it is to be handed over to the EEPRE Divison Office, Bagalkot after Issuing the LOI. True Technical Bid
tenderWorkLocationList
tenderAddress	None
tenderRecallDTO	None