| 3927805 | 151473 | None | V 1 Page no 8 Item No 1.12 | Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work. | Cum | 97.85 | 97.85 | 155.78 | False | None | None | False | None | False | 15243.073 | 0 |
| 3927806 | 151473 | None | V 3 Page no 17 Item No 3.7 | Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment,scarified to a depth of 150 mm, mixed with water at OMC and then compacted by rolling so as to achieve minimum dry density as given in Table 300-2 for embankment construction. | Cum | 108.15 | 108.15 | 77.89 | False | None | None | False | None | False | 8423.8035 | 0 |
| 3927807 | 151473 | None | V 3 Page no 23 Item No 4.1(V) | Construction of Granular Sub-Base of required grading as per design mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401 For Grading -V Material | Cum | 2561.61 | 2561.61 | 51.93 | False | None | None | False | None | False | 133024.4073 | 0 |
| 3927808 | 151473 | None | V 3 Page no 49 Item No 6.1 | Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 14:1, aggregate gradation after blending to be as per table 600-1, cement content not to be less than 140 kg/ m3 , optimum moisture content to be determined during trial length construction, concrete strength not to be less than 7 Mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 t vibratory roller, finishing and curing | Cum | 5067.6 | 5067.6 | 63.21 | False | None | None | False | None | False | 320322.996 | 0 |
| 3927809 | 151473 | None | V3 Page No.149. Item No.16.28 | Providing and constructing un-reinforced plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS:383:2016:, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including construction joints, primer, sealant, curing of concrete slabs for 14-days, and water finishing to lines and grade as per drawing and technical specification clause 1501 with all
lead, lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments etc., complete. as per the directions of the Engineer-in-charge of the work. | Cum | 6956.62 | 6956.62 | 134.29 | False | None | None | False | None | False | 934204.4998 | 0 |
| 3927810 | 151473 | None | V1 Page no 8 Item No 1.14.1 | Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In all kinds of soils Depth upto 3 m | Cum | 105.06 | 105.06 | 76.08 | False | None | None | False | None | False | 7992.9648 | 0 |
| 3927811 | 151473 | None | V1 Page no 15 Item No 2.1.2 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:4:8( M5) Using 40 mm nominal size graded crushed coarse aggregates Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates | Cum | 5833.92 | 5833.92 | 11.28 | False | None | None | False | None | False | 65806.6176 | 0 |
| 3927812 | 151473 | None | V1 Page no 16 Item No 2.4.2 | Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates | Cum | 8792.13 | 8792.13 | 26.89 | False | None | None | False | None | False | 236420.3757 | 0 |
| 3927813 | 151473 | None | V1 Page no 18 Item No 2.11 h | Supplying, Fitting and Placing TMT Fe 550 Reinforcement in Foundation / Substructure / Superstructure complete as per Drawing and Technical Specifications. | Tonne | 81381.33 | 81381.33 | 1.72 | False | None | None | False | None | False | 139975.8876 | 0 |
| 3927814 | 151473 | None | V1 Page no 7 Item No 1.9 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. | Cum | 273.98 | 273.98 | 13.85 | False | None | None | False | None | False | 3794.623 | 0 |
| 3927815 | 151473 | None | V 3 Page no 17 Item No 3.1 | Removal of Unserviceable Soil with Disposal upto a suitable
distance as directed by the Engineer incharge of work | Cum | 87.55 | 87.55 | 62.24 | False | None | None | False | None | False | 5449.112 | 0 |
| 3927816 | 151473 | None | V5 Page no 198 Item No 16.28.1 | Repairs to Machinehole for different depths including removal of debris, levelling the brick masonry, construction of brick masonry upto Ground level, providing CC coping alround the MH cover, plastering both inside and outside to the brick masonry and fixing of manhole frame and cover, curing, refilling with appurtenances complete.Upto 0.30m depth | Each | 8414.07 | 8414.07 | 12.0 | False | None | None | False | None | False | 100968.84 | 0 |
| 3927817 | 151473 | None | Volume - V Page.no.139 item No.12.1.1 | Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete )Borewell depth of 0 to 50 m | m | 381.1 | 381.1 | 50.0 | False | None | None | False | None | False | 19055.0 | 0 |
| 3927818 | 151473 | None | Volume - V Page.no.139 item No.12.1.2 | Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete )Borewell depth of 50 to 100 m | m | 477.92 | 477.92 | 50.0 | False | None | None | False | None | False | 23896.0 | 0 |
| 3927819 | 151473 | None | Volume - V Page.no.139 item No.12.1.3 | Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete )Borewell depth of 100 to 150 m | m | 507.79 | 507.79 | 50.0 | False | None | None | False | None | False | 25389.5 | 0 |
| 3927820 | 151473 | None | Volume - V Page.no.139 item No.12.1.4 | Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete )Borewell depth of 150 to 200 m. | m | 589.16 | 589.16 | 50.0 | False | None | None | False | None | False | 29458.0 | 0 |
| 3927821 | 151473 | None | Volume - V Page.no.139 item No.12.1.5 | Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete )Borewell depth of 200 to 250 m | m | 691.13 | 691.13 | 50.0 | False | None | None | False | None | False | 34556.5 | 0 |
| 3927822 | 151473 | None | Volume - V Page.no.139 item No.12.1.6 | Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete )Borewell depth of 250 to 300 m | m | 762.2 | 762.2 | 50.0 | False | None | None | False | None | False | 38110.0 | 0 |
| 3927823 | 151473 | None | Volume - V Page.no.151 item No.12.1.7 | Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete )Borewell depth of 300 to 350 m | m | 894.04 | 894.04 | 50.0 | False | None | None | False | None | False | 44702.0 | 0 |
| 3927824 | 151473 | None | Volume - V Page.no.143 item No. 12.32 | Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and latest ammendments, electrical resistance welded steel tubes, material and conforming to IS 1387-1993 and manufactured by basic open hearth electric or basic oxygen process in random length of 5-7m both ends.threaded conforming to IS 554-1985 one end fixed with socket conforming to IS 4270-2001 and the other end with screwed pipes all shall be responsibaly free from defects. The tubes shall be responsible straight end should be with ISI marking weighing 25.10kg/m.prices include Collar-Medium duty. | m | 1990.99 | 1990.99 | 15.0 | False | None | None | False | None | False | 29864.85 | 0 |
| 3927825 | 151473 | None | Volume - V Page.no.140 item No. 12.7 | Logging / scanning of borewell at any depth continuously with the help of Logger unit including the cost of transportation charges, crew charges, stationery charges and cost of consumables etc. | Each | 3784.22 | 3784.22 | 1.0 | False | None | None | False | None | False | 3784.22 | 0 |
| 3927826 | 151473 | None | Volume - V Page.no.140 item No. 12.4 | Geophysical investigation at site for sinking borewells for Providing drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical sounding by adopting Venner or Schlumbergers's method, including reconnaissance survey of geological formation. Geophysical investigation of existing ground water in the vicinity, its quality, quantity and acceptability of the users, indicating the location of the site, recommended depth of casing pipe equired to seal the top unconsolidated formation including an extra depth of 1.0
metre in consolidated formation for proper seating of casing pipe, depth of drilling required to cover full depth of aquifer proposed to be tapped, probable yield and other information required including transportation of instruments and accessories to work site, engaging technical personal and labour required etc. NOTE: 1) Additional rate on item 1&2 is allowed for drilling in over burden and fixing Casing pipes beyond 20 M (for fixing Casing pipes only) a) Above 20 M and upto 30 M - 15%, b) Above 30 M - 30% (Measurement of overburden is restricted to the depth of casing pipe fixed excluding initial depth of 20M and projection above ground level). 2) A sum of Rs. 100/- is to be deducted for Dry Borewell towards yield test ect complete | Each | 5446.64 | 5446.64 | 1.0 | False | None | None | False | None | False | 5446.64 | 0 |
| 3927827 | 151473 | None | Volume - V Page.no.153 item No.13.17.7 | Providing,supplying to work site, Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications,as per necessary ammendments and instructions of engineer incharge of work. 12.50 HP - 90 LPM @ 264 m = 24 STG Outlet Dia - 2.00" | Each | 66051.84 | 66051.84 | 1.0 | False | None | None | False | None | False | 66051.84 | 0 |
| 3927828 | 151473 | None | Volume - V Page.no.154 item No.13.22.4 | Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendments. 1x3x6 m2 | m | 190.55 | 190.55 | 150.0 | False | None | None | False | None | False | 28582.5 | 0 |
| 3927829 | 151473 | None | Volume - V Page.no.127 item No.11.2.6 | Providing, Laying and Fixing GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, including testing for water tightness, with all lead and commissioning. (contractor will make his own arrangements for procuring water for testing)For Medium Duty GI pipe:50mm | m | 601.52 | 601.52 | 75.0 | False | None | None | False | None | False | 45114.0 | 0 |
| 3927830 | 151473 | None | Volume - V Page.no.129 item No.11.6 | Providing wrought mild steel (galvanized) 50mm dia GI collar confirming to IS 1239-II, 1991 with latest amendments if any. | Each | 275.01 | 275.01 | 13.0 | False | None | None | False | None | False | 3575.13 | 0 |
| 3927831 | 151473 | None | Volume - V Page.no.129 item No.11.7.6 | Supply and delivery at site wrought middle steel (galvanized) GI elbow confirming to IS 1239-II, 1991 with latest amendments if any for: 50 mm dia GI elbow | Each | 275.01 | 275.01 | 1.0 | False | None | None | False | None | False | 275.01 | 0 |
| 3927832 | 151473 | None | Volume - V Page.no.154 item No.13.25.1 | Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments for: 50 mm dia | Each | 1287.5 | 1287.5 | 1.0 | False | None | None | False | None | False | 1287.5 | 0 |
| 3927833 | 151473 | None | Volume - V Page.no.155 item No.30.2 | Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog Voltmeter 1ni with Phase selector switch, Isolating switch OUTGOING for Main Electrical Pump: 1 No. MCB 1 No. DOL of S/D Starter suitable for respective HP 1 No. Electrcal Protection Like single Phase preventor, under voltage over Volage, under current over current & dry run protection suitable for the pump described above 1 no Indoor typ e NOTE: 1) DOLDirect Online Starter 2)
S-D- Star Delta Starter 6 to 15 HP pumps | Each | 16377.0 | 16377.0 | 1.0 | False | None | None | False | None | False | 16377.0 | 0 |
| 3927834 | 151473 | None | Volume - V Page.no.156 item No.13.38.1 | Providing, Supplying and fixing suitable for 1.1 KV class UG cable filled with necessary bitumen or insulating compound complete with terminals, clamps, bolts, nuts and washers etc with necessary materials and labour tools and equipments as per instructions of engineer incharge of work 3.5 X 6Sqm | Each | 386.25 | 386.25 | 1.0 | False | None | None | False | None | False | 386.25 | 0 |
| 3927835 | 151473 | None | Volume - V Page.no.156 item No. 13.32 | Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well caps, cable clips and water tight gland cable protectors, bolts, nuts, valve and gauges,tools and equipments etc., involved in the job as per specifications, with necessary tests as per specifications, with testing of as per instructions of engineerincharge of work. | Job | 6695.0 | 6695.0 | 1.0 | False | None | None | False | None | False | 6695.0 | 0 |