| 1726928232000 | 0 | None | None | Buildings | Construction of AEE TLI office above the 220 KV Control room building, Hoody. | 1799492.18 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 4052017 | 157271 | None | code01 | Demolishing cement concrete manually/ by mechanical means including disposal of material to the appropriate disposal area as per direction of Engineer-in-charge.
(KPWD SR 2023-24, Vol-2, P - 187 / I - 19.2.1) | Cum | 2158.57 | 2158.57 | 2.0 | False | None | None | False | None | False | 4317.14 | 0 | | 4052018 | 157271 | None | code02 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge. In cement mortar
(KPWD SR 2023-24, Vol-2, P - 187 / I - 19.7.3) | Cum | 1335.64 | 1335.64 | 3.0 | False | None | None | False | None | False | 4006.92 | 0 | | 4052019 | 157271 | None | code03 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material to the appropriate disposal area as per direction of Engineer-in-charge. For thickness of tiles above 25 mm and up to 40 mm
(KPWD SR 2023-24, Vol-2, P - 189 / I - 19.22.2) | Cum | 96.05 | 96.05 | 70.0 | False | None | None | False | None | False | 6723.5 | 0 | | 4052020 | 157271 | None | code04 | Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately. M20 Design Mix Using 20 mm and down size graded crushed coarse aggregates (KPWD SR 2023-24 Volume-I, Page 17 Item No:2.4.2) | Cum | 9027.98 | 9027.98 | 22.0 | False | None | None | False | None | False | 198615.56 | 0 | | 4052021 | 157271 | None | code05 | Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:6 (1cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer in charge of work.(PWD SR 2023-24 Volume-2, Page 13 Item No: 6.2) | Cum | 10355.44 | 10355.44 | 18.5 | False | None | None | False | None | False | 191575.64 | 0 | | 4052022 | 157271 | None | code06 | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, lapping/welding joints, tying with binding wire / soft annealed steel wire and other ancillary operations complete as per drawing and technical specification. Buildings.
(KPWD SR 2023-24 Volume-I, Page 18, Item No: 2.11(a)) | t | 116115.19 | 116115.19 | 2.4 | False | None | None | False | None | False | 278676.456 | 0 | | 4052023 | 157271 | None | code07 | Providing 20 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.
(PWD SR 2023-24 Volume-2, Page 41 Item No: 8.3.2) | Sqm | 432.23 | 432.23 | 320.0 | False | None | None | False | None | False | 138313.6 | 0 | | 4052024 | 157271 | None | code08 | Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x1200 mm
(PWD SR 2023-24 Volume-2, Page 60, Item No: 9.12.5) | Sqm | 1705.57 | 1705.57 | 60.0 | False | None | None | False | None | False | 102334.2 | 0 | | 4052025 | 157271 | None | code09 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge.
(PWD SR 2023-24, Volume-2, Page 50, Item No: 8.51) | Sqm | 129.8 | 129.8 | 180.0 | False | None | None | False | None | False | 23364.0 | 0 | | 4052026 | 157271 | None | code10 | Providing & fixing of 2-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6 PHR with TPE (Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 44mm width x 40mmheight with reinforcement of 1mm thickness and Sash with overall size of 27mm X 53mm with UPVC honeycomb structure inside in lieu of GI reinforcement. Coextruded Glazing bead for fixing of glass shall be of size 9.5mm x 21.5mm. Win Dows shall be provided with 5mm plain float glass, standard hardware& single point locking system with Crescent Locks. Wall thickness of frame & sash shall be of 2 mm.Maximum possible size 1219mm x 1219mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) (PWD SR 2023-24, Volume-2, Page 108, Item No: 12.84) | Sqm | 6519.85 | 6519.85 | 8.0 | False | None | None | False | None | False | 52158.8 | 0 | | 4052027 | 157271 | None | code11 | Providing& fixing of Openable door made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPV(Thermo Plastic Vulcanized) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the openable frame. The frame having overall size of 60mm x 55mm with GI reinforcement of 1mm thickness and openable sash with overall size of 60mm x 102mm and GI reinforcement of 2mm thickness. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 34 mm. Windows shall be provided with 6mm plain float glass, Standard hardware with 2D/3D hinge & Multi point locking system with Handle. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 900mm x 2400mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made)
(PWD SR 2023-24, Volume-2, Page 108, Item No: 12.92) | Sqm | 8106.01 | 8106.01 | 2.1 | False | None | None | False | None | False | 17022.621 | 0 | | 4052028 | 157271 | None | code12 | Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance 1mm), with wall thickness 2.0 mm ( 0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm ( 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer’s specification and direction of Engineer- in-charge. 42x50 mm PVC Extruded section
(PWD SR 2023-24, Volume-2, Page 108, Item No: 12.83.2) | Mtr | 310.22 | 310.22 | 6.2 | False | None | None | False | None | False | 1923.364 | 0 | | 4052029 | 157271 | None | code13 | Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) Mix 1:2:4 (M15) Using 20 mm nominal size graded crushed coarse aggregates.
(KPWD SR 2023-24 Volume-1, Page 17 Item No: 2.4.1) | Cum | 8312.39 | 8312.39 | 8.0 | False | None | None | False | None | False | 66499.12 | 0 | | 4052030 | 157271 | None | code14 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 litre/10 m² over and including one coat of Special primer applied @ 0.75 litre /10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge..(PWD SR 2022 Volume-2, Page 46 Item No:8.33.1) | Sqm | 205.08 | 205.08 | 170.0 | False | None | None | False | None | False | 34863.6 | 0 | | 4052031 | 157271 | None | code15 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two coats applied @ 1.43 litre/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(PWD SR 2023-24, Volume-2, Page 132 Item No:8.31) | Sqm | 231.04 | 231.04 | 160.0 | False | None | None | False | None | False | 36966.4 | 0 | | 4052032 | 157271 | None | code16 | Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe all-round to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. complete For PVC pipes 110mm dia., 6 kg/sqcm & class 3
(BWSSB SR 2023-24, P - 113 / I - 10.1.7) | Mtr | 533.48 | 533.48 | 60.0 | False | None | None | False | None | False | 32008.8 | 0 | | 4052033 | 157271 | None | code17 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in charge. (Glazing, panelling and dash fasteners to be paid for separately) :For shutters of doors, windows & ventilators including fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) including cost of materials, labour, usage charges of machinery complete as per specifications. (KPWD SR 2023-24, P - 88 / I - 11.35.2.3) | Kgs | 755.44 | 755.44 | 280.0 | False | None | None | False | None | False | 211523.2 | 0 | | 4052034 | 157271 | None | code18 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/ m²) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. (KPWD SR 2023-24, P - 88 / I - 11.37.1) | Sqm | 1282.42 | 1282.42 | 16.5 | False | None | None | False | None | False | 21159.93 | 0 | | 4052035 | 157271 | None | code19 | Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminium doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer- in-charge:
Pre-laminated particle board with decorative lamination on both sides including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.. (KPWD SR 2023-24, P - 89 / I - 11.36.2) | Sqm | 1275.93 | 1275.93 | 53.0 | False | None | None | False | None | False | 67624.29 | 0 | | 4052036 | 157271 | None | code20 | Providing and fixing chromium plated brass curtain rod with ISI mark having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete 25mm dia
(KPWD SR 2023-24, P - 106 / I - 12.66.3) | Mtr | 995.57 | 995.57 | 7.0 | False | None | None | False | None | False | 6968.99 | 0 | | 4052037 | 157271 | None | code21 | Providing & fixing 100% Polyester Curtains with specification of regular wash as per direction of Engineer in charge
(KPWD SR 2023-24, P - 219 / I - 22.24) | Sqm | 1557.6 | 1557.6 | 9.0 | False | None | None | False | None | False | 14018.4 | 0 | | 4052038 | 157271 | None | code22 | Supply and delivery at site special moulded variety PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments 110 mm dia PVC Elbows
(BWSSB SR 2023-24, P - 117 / I - 10.9.8) | Nos | 391.99 | 391.99 | 12.0 | False | None | None | False | None | False | 4703.88 | 0 | | 4052039 | 157271 | None | code23 | Supplying of special moulded variety PVC couplers as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark and with its latest amendments to walk site etc. complete. 110 mm dia PVC couplers
(BWSSB SR 2023-24, P - 116 / I - 10.8.8) | Nos | 221.96 | 221.96 | 12.0 | False | None | None | False | None | False | 2663.52 | 0 | | 4052040 | 157271 | None | code24 | Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.(KPWD SR 2023-24 Volume-II, Page 75 Item No:11.2) | Kg | 146.67 | 146.67 | 250.0 | False | None | None | False | None | False | 36667.5 | 0 | | 4052041 | 157271 | None | code25 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps
(KPWD SR 2023-24 Volume-2, Page 132, Item No:14.7.1) | Nos | 4000.44 | 4000.44 | 1.0 | False | None | None | False | None | False | 4000.44 | 0 | | 4052042 | 157271 | None | code26 | Providing and fixing white vitreous China pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.
(KPWD SR 2023-24 Volume-2, Page 132, Item No:14.8) | Nos | 1847.05 | 1847.05 | 1.0 | False | None | None | False | None | False | 1847.05 | 0 | | 4052043 | 157271 | None | code27 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in charge for 20mm nominal OD pipes.
(KPWD SR 2021-12, Vol-2, I - 13.33.2) | Mtr | 290.48 | 290.48 | 100.0 | False | None | None | False | None | False | 29048.0 | 0 | | 4052044 | 157271 | None | code28 | For 25mm nominal OD pipes.
(KPWD SR 2021-12, Vol-2, I - 13.33.3) | Mtr | 384.21 | 384.21 | 40.0 | False | None | None | False | None | False | 15368.4 | 0 | | 4052045 | 157271 | None | code29 | Providing and fixing Bib cock with wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accessories complete - Class Economy
(KPWD SR 2021-12, Vol-2, P-139, I - 14.55(a)) | Nos | 1449.87 | 1449.87 | 6.0 | False | None | None | False | None | False | 8699.22 | 0 | | 4052046 | 157271 | None | code30 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
(KPWD SR 2021-12, Vol-2, P-123, I - 13.34) | Ltr | 11.68 | 11.68 | 4000.0 | False | None | None | False | None | False | 46720.0 | 0 | | 4052047 | 157271 | None | code31 | Providing & fixing and laying pressed clay tiles (as per approved pattern 20 mm nominal thickness of approved size) on roofs jointed with cement mortar 1:4 (1 cement: 4 coarse sand) mixed with 2% integral water proofing compound, laid over a bed of 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) and finished neat complete
(KPWD SR 2021-12, Vol-2, P-23, I - 7.16) | Sqm | 733.37 | 733.37 | 72.0 | False | None | None | False | None | False | 52802.64 | 0 | | 4052048 | 157271 | None | code32 | Supplying and fixing regular MCB distribution boards on wall/old board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS enclosure. 4 Way SP & N
(PWD Ele SR 2023-24, P-18, I -5.19.1) | Nos | 1610.82 | 1610.82 | 1.0 | False | None | None | False | None | False | 1610.82 | 0 | | 4052049 | 157271 | None | code33 | Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sum (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Short point up to 3Mtr from tapping point to out let via switch.(PWD Ele SR 2023-24, P-5, I -2.1.1) | No | 369.93 | 369.93 | 15.0 | False | None | None | False | None | False | 5548.95 | 0 | | 4052050 | 157271 | None | code34 | Medium point above 3Mtr up to 6Mtr from tapping point to out let via switch. (PWD Ele SR 2023-24, P-5, I -2.1.2) | No | 511.41 | 511.41 | 15.0 | False | None | None | False | None | False | 7671.15 | 0 | | 4052051 | 157271 | None | code35 | Long point above 6Mtr up to 10Mtr from tapping point to out let via switch. (PWD Ele SR 2023-24, P-5, I -2.1.3) | No | 739.86 | 739.86 | 15.0 | False | None | None | False | None | False | 11097.9 | 0 | | 4052052 | 157271 | None | code36 | Supplying heavy gauge PVC Conduit Pipe 20 dia 2 mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering up to the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary. A).20mm (PWD Ele SR 2023-24, P-2, I -1.1.1) | Mtr | 85.67 | 85.67 | 50.0 | False | None | None | False | None | False | 4283.5 | 0 | | 4052053 | 157271 | None | code37 | Supplying and fixing PVC/metal conduit Deep junction box 19/20 mm deep Junction box. (PWD Ele SR 2023-24, P-2, I -1.5.1) | No | 63.6 | 63.6 | 6.0 | False | None | None | False | None | False | 381.6 | 0 | | 4052054 | 157271 | None | code38 | Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/NF screws etc., complete 8 Way.. (PWD Ele SR 2023-24, P-8, I -3.3.5) | No | 284.26 | 284.26 | 6.0 | False | None | None | False | None | False | 1705.56 | 0 | | 4052055 | 157271 | None | code39 | Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 6-32 A DP
(PWD Ele SR 2023-24, P - 17 / I - 5.17.2) | Nos | 959.22 | 959.22 | 2.0 | False | None | None | False | None | False | 1918.44 | 0 | | 4052056 | 157271 | None | code40 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A One Way Switch.
(PWD Ele SR 2023-24, P - 9 / I - 3.6.1) | Nos | 132.4 | 132.4 | 50.0 | False | None | None | False | None | False | 6620.0 | 0 | | 4052057 | 157271 | None | code41 | Supplying of .....feet -PVC Batten with integrated LED tube .... W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V@ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. LED light fitting 1 x 4' - 36/40 W
(PWD Ele SR 2023-24, P - 43 / I - 11.3.3) | Nos | 1647.16 | 1647.16 | 14.0 | False | None | None | False | None | False | 23060.24 | 0 | | 4052058 | 157271 | None | code42 | Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, required Nos of round blocks and clamps. On wall/ ceiling / Rafter / Girders
(PWD Ele SR 2023-24, P - 56 / I - 13.7.1) | Nos | 158.36 | 158.36 | 14.0 | False | None | None | False | None | False | 2217.04 | 0 | | 4052059 | 157271 | None | code43 | Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball bearing system. 48" Sweep (1200 mm) Regular model
(PWD Ele SR 2023-24, P - 30 / I - 6.3.1) | Nos | 3873.23 | 3873.23 | 4.0 | False | None | None | False | None | False | 15492.92 | 0 | | 4052060 | 157271 | None | code44 | Fixing a ceiling /wall mounting fan of all capacities and all types, with necessary clamps and 'S' hook made out of 15mm dia MS rod, with 5 A. ceiling rose of approved quality with necessary length of 23/0.0076 inch PVC insulated twin twisted wire of approved quality, mounted on a suitable size wooden board and wired.
(PWD Ele SR 2023-24, P - 57 / I - 13.11) | Nos | 408.87 | 408.87 | 4.0 | False | None | None | False | None | False | 1635.48 | 0 | | 4052061 | 157271 | None | code45 | 1.1 kV, XLPE or Heat resistant PVC insulated, PVC extruded Inner Sheath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 . 10 Sqmm, 4 Core, (10 GI Strips - 4 x 0.8 mm)
(ESCOMs Ele SR 2023-24, P-13 /Sl. No. 199/ I-32.03) | Mtr | 153.17 | 153.17 | 20.0 | False | None | None | False | None | False | 3063.4 | 0 |
|