| 1726927537000 | 0 | None | None | Water /sewage treatment tanks | Work of construction of Zero Fecal coliform tank at Horamavu STP premises coming under AEE(WWM-STP-H&A.V-1) Sub division. | 1945186.2 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 4051867 | 157260 | None | a01 | Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. In all kinds of soils Depth upto 3 m | Cum | 102.0 | 102.0 | 292.5 | False | None | None | False | None | False | 29835.0 | 0 | | 4051868 | 157260 | None | a01a | In all kinds of soils Depth 3 m to 6 m | Cum | 117.0 | 117.0 | 48.75 | False | None | None | False | None | False | 5703.75 | 0 | | 4051869 | 157260 | None | a02 | Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:4:8 Using 40 mm and down size graded
crushed coarse aggregates | Cum | 5664.0 | 5664.0 | 9.75 | False | None | None | False | None | False | 55224.0 | 0 | | 4051870 | 157260 | None | a03 | Providing and laying in position Ready Mixed or Batch Mixed concrete from ISO 9001 accredited plants as per IS 10262-2009 mix design procedure for Reinforced Cement Concrete works in all types of Structures other than Road works, using coarse aggregate and fine aggregate derived from natural sources, Ordinary Portland cement & GGBS, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the Engineer-in-charge. Concrete of M30 grade with Cement & Cementitious
Content in 75:25 proportion and including for form work of Earth retaining Structures | Cum | 7295.0 | 7295.0 | 32.84 | False | None | None | False | None | False | 239567.8 | 0 | | 4051871 | 157260 | None | a04 | Supplying, fitting and placing TMT FE 550/550D Steel Reinforcement complete as per drawing and technical specification. | Tonne | 79011.0 | 79011.0 | 2.5 | False | None | None | False | None | False | 197527.5 | 0 | | 4051872 | 157260 | None | a05 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. | Sqm | 1310.0 | 1310.0 | 271.26 | False | None | None | False | None | False | 355350.6 | 0 | | 4051873 | 157260 | None | a06 | Providing and fixing Galvanised wire mesh of average width of aperture 1.4 mm and nominal dia of wire 0.63 mm plaster mesh manufactured out of hot dipped galvanised iron on Soild Block masonary Wall Surface including cost of materials, labour for fixing complete as per specifications. | Sqm | 293.0 | 293.0 | 190.92 | False | None | None | False | None | False | 55939.56 | 0 | | 4051874 | 157260 | None | a07 | Providing 20 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 429.0 | 429.0 | 177.76 | False | None | None | False | None | False | 76259.04 | 0 | | 4051875 | 157260 | None | a08 | Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 89.0 | 89.0 | 176.8 | False | None | None | False | None | False | 15735.2 | 0 | | 4051876 | 157260 | None | a09 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. | Cum | 266.0 | 266.0 | 136.5 | False | None | None | False | None | False | 36309.0 | 0 | | 4051877 | 157260 | None | a10 | Removal of Unserviceable Soil with Disposal upto a suitable distance as directed by the Engineer incharge of work m3 | Cum | 85.0 | 85.0 | 477.75 | False | None | None | False | None | False | 40608.75 | 0 | | 4051878 | 157260 | None | a11 | Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, including dressing of excavated surfaces, disposing off or leveling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m. Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering and lift upto 1.5 m including cost of labour, tools, usage& other appurtenances required to complete the work. In all kinds of soils. Depth upto 1.50mm | Mtr | 484.0 | 484.0 | 50.0 | False | None | None | False | None | False | 24200.0 | 0 | | 4051879 | 157260 | None | a12 | Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work for :80 mm nominal dia Pipes | Mtr | 674.0 | 674.0 | 200.0 | False | None | None | False | None | False | 134800.0 | 0 | | 4051880 | 157260 | None | a12a | 25 mm nominal dia Pipes | Mtr | 224.0 | 224.0 | 125.0 | False | None | None | False | None | False | 28000.0 | 0 | | 4051881 | 157260 | None | a12b | 40 mm nominal dia Pipes | Mtr | 304.0 | 304.0 | 85.0 | False | None | None | False | None | False | 25840.0 | 0 | | 4051882 | 157260 | None | a12c | 20 mm nominal dia Pipes | Mtr | 172.0 | 172.0 | 120.0 | False | None | None | False | None | False | 20640.0 | 0 | | 4051883 | 157260 | None | a13 | Providing Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications, to work site as per necessary ammendments and instructions of engineer incharge of the work - 20.00 HP - 135 LPM @ 350 m = 25 STG Outlet Dia - 2.00" | Each | 81090.0 | 81090.0 | 2.0 | False | None | None | False | None | False | 162180.0 | 0 | | 4051884 | 157260 | None | a14 | Erection, testing, commissioning and trial running of centrifugal pump and motor with all accessories necessary for satisfactory running of pump including cost of all materials, machinery, labour & all necessary works complete as per terms and conditions of contract. 15 to 30 hp with all accessories. | Each | 22750.0 | 22750.0 | 2.0 | False | None | None | False | None | False | 45500.0 | 0 | | 4051885 | 157260 | None | a15 | Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendments. 1x3x10 Sqm | Mtr | 280.0 | 280.0 | 60.0 | False | None | None | False | None | False | 16800.0 | 0 | | 4051886 | 157260 | None | a16 | Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well caps, cable clips and water tight gland cable protectors, bolts, nuts, valve and gauges,tools and equipments etc., involved in the job as per specifications, with necessary tests as per specifications, with testing of as per instructions of engineer incharge of work | Job | 6500.0 | 6500.0 | 2.0 | False | None | None | False | None | False | 13000.0 | 0 | | 4051887 | 157260 | None | a17 | Providing and fixing suitable for 1.1 KV class UG cable filled with necessary bitumen/insulating compound complete with terminals, clamps,bolts,nuts and washers etc. with necessary materials and labour tools and equipments as per instructions of engineer incharge of work 3.5x25 Sqm | Each | 562.0 | 562.0 | 8.0 | False | None | None | False | None | False | 4496.0 | 0 | | 4051888 | 157260 | None | a18 | Supply and delivery at site brand new best make level guage suitable for centrifugal pump confirming to latest IS standards | Each | 750.0 | 750.0 | 2.0 | False | None | None | False | None | False | 1500.0 | 0 | | 4051889 | 157260 | None | a19 | Supply and delivery at site brand new best make starter/ control panel suitable for following HP centrifugal pump confirming with ISI mark and its latest amendments.10 to 12 HP centrifugal pump | Each | 35650.0 | 35650.0 | 2.0 | False | None | None | False | None | False | 71300.0 | 0 | | 4051890 | 157260 | None | a20 | Manufacturing, providing, trasporting, rolling, lowering, laying, jointing & testing and commissioning of MS specials of minimum 8mm thick such as bends, tail pieces, reduces etc. conforming to IS-7322:1985 with latest amendments and including perfect linking and welding of joints to correct position includng cost and conveyance of materials with all lead and lifts, cost all labour and giving satisfactory hydraulic test as per IS:3589:2001 with latest amendments for test pressure and working pressure both at factory and site etc. complete as per detailed specifications with inside lining two coat of food grade epoxy painting of approved make with Each coat of 250 micron thick (after dry) over one coat of food grade epoxy primer of approved make with minium of 50 micron thick (after dry) and outside 25mm thick coating in CM 1:3 by providing 50x50mm weld mesh including loading and unloading of the pipes for the following category to suit PSC / MS / CI / AC / DI / PVC pipes. The weight of MS shell only by considered before lining and coating for arriving at the rate. The thickness of plate will be specified by the engineer. (Contractor will make his own arrangements for procuring water for testing for: Note: 1) For small works where the C.M. lining is not practicable for inside surface of the pipe, food grade expoxy painting of two coat over one coat of epoxy primer may be proposed and got approved. 2) The above rates are applicable only for pipe works etc. complete - Pipe bends,branches, tail pieces, reducers etc. for upto 500mm dia pipes | Kgs | 170.0 | 170.0 | 1376.0 | False | None | None | False | None | False | 233920.0 | 0 | | 4051891 | 157260 | None | a21 | Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. Flat......with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. 50 x 50 x 6 mm | Mtr | 395.0 | 395.0 | 25.0 | False | None | None | False | None | False | 9875.0 | 0 | | 4051892 | 157260 | None | a22 | Fabricating supplying and mounting MS box made out ....SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour etc., complete. 14SWG | Sq CM | 0.5 | 0.5 | 30150.0 | False | None | None | False | None | False | 15075.0 | 0 | | 4051893 | 157260 | None | a23 | Plumbing Labour Charges | LS | 30000.0 | 30000.0 | 1.0 | False | None | None | False | None | False | 30000.0 | 0 |
|