createdTs	None
version	None
createdDate	None
modifiedDate	None
noticeInvitingTenderDTO	createdTs 1726854028515 version 4 createdDate None modifiedDate None tenderType RFQ evaluationType TWO_COVER evaluationTypeText Two Cover invitingStrategy OPEN invitingStrategyText Open taxType INCLUSIVE_TAX tenderFee 4670.00 emd 237000.00 bidValueType ITEM_WISE bidValueTypeText Item wise tenderReceiptClose 09-10-2024 16:00:00 tenderQueryClose 03-10-2024 11:00:00 technicalBidOpen 10-10-2024 17:00:00 publishedDate 21-09-2024 18:12:52 publishedByPost RDPR_EE_DIV_HAV publishedByUser KPE10818 - S.DEVARAJU bidValidityPeriod 90 noOfCalls 1 preBidMeetingDate 01-10-2024 11:00:00 preBidMeetingYn True preQualificationBidOpen None denominationType RUPEES denominationTypeText Rupees retenderedYn None percentageRateTypeText None contactPerson EE PRE Division Haveri splitEmdRequiredYn False emdBankGuarantee None emdCash None bgValidityPeriod None hideWeightage None multipleCurrencySelectionAllowedYn False isTechWeightageAllowed False highestBidderSelection False isVariableEmdAllowed None qcbsTenderYn None itemwiseEmdRequiredYn None sampleSubmissionDate None officeNumber 08375232454 mobileNumber 9986297457 tenderSupplierList None
tenderSchedule	createdTs 1726854028568 version 7 createdDate None modifiedDate None tenderNumber RDPR/2024-25/BD/WORK_INDENT8907 title Construction of new building to Assistant Executive Engineer,Panchayat raj engineering sub-division,Engineering wing,Administrative office,Assistant Executive Engineer,Rural Drinking water and Sanitation sub-division Savanur,Electrification,Water supply ,sanitary works at Savanur Taluk of Haveri District. description Construction of new building to Assistant Executive Engineer,Panchayat raj engineering sub-division,Engineering wing,Administrative office,Assistant Executive Engineer,Rural Drinking water and Sanitation sub-division Savanur,Electrification,Water supply ,sanitary works at Savanur Taluk of Haveri District. category WORKS categoryText Works ecv 18643319.91 deptName Rural Development and Panchayat Raj Department status PUBLISHED statusText Published remarks None csrValue None ecvtenderYn True location 940 locationName RDPR Division Office Haveri provisionalAmount 19000000.0 groupOverheadTotal 2843896.26 fileNumber AEE/PRE/Sub-dn/SVR/building/2024-25
tenderSubEstimateList	createdTs version createdDate modifiedDate workCategoryName subEstimateName estimateTotal itemList 1726854029000 0 None None Buildings Construction of new building to Assistant Executive Engineer,Panchayat raj engineering sub-division,Engineering wing,Administrative office,Assistant Executive Engineer,Rural Drinking water and Sanitation sub-division Savanur,Electrification,Water supply ,sanitary works at Savanur Taluk Haveri District. 13322089.37 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 4042965 156904 None 1.12 Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work. In all kinds of soils upto 300 mm depth Cum 97.85 97.85 529.55 False None None False None False 51816.4675 0 4042966 156904 None 1.14.1 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In all kinds of soils Depth upto 3 m Cum 105.06 105.06 273.28 False None None False None False 28710.7968 0 4042967 156904 None 4.1 Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 l/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications. Sqm 121.54 121.54 490.14 False None None False None False 59571.6156 0 4042968 156904 None 2.1.2 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications.Mix 1:4:8 Using 40 mm nominal size graded crushed coarse aggregates Cum 5833.92 5833.92 64.11 False None None False None False 374012.6112 0 4042969 156904 None 2.11(a) Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification Buildings For Ground floor Tonne 92140.71 92140.71 16.96 False None None False None False 1562706.4416 0 4042970 156904 None 2.11(a) Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification Buildings. For First floor Tonne 93062.12 93062.12 9.606 False None None False None False 893954.72472 0 4042971 156904 None 2.11(a) Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification Buildings For second floor Tonne 93983.52 93983.52 0.4075 False None None False None False 38298.2844 0 4042972 156904 None 2.2.1 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 6993.66 6993.66 91.83 False None None False None False 642227.7978 0 4042973 156904 None 2.2.1 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 6993.66 6993.66 4.65 False None None False None False 32520.519 0 4042974 156904 None 5.2 Providing Coursed rubble masonry (first sort) with hard stone in foundation and plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 6816.54 6816.54 23.17 False None None False None False 157939.2318 0 4042975 156904 None 5.3 Providing Coursed rubble masonry (second sort) with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 6391.15 6391.15 17.05 False None None False None False 108969.1075 0 4042976 156904 None 1.9 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m Cum 273.98 273.98 72.47 False None None False None False 19855.3306 0 4042977 156904 None 1.11 Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. Cum 445.99 445.99 90.14 False None None False None False 40201.5386 0 4042978 156904 None 2.3.1 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 9769.04 9769.04 18.91 False None None False None False 184732.5464 0 4042979 156904 None 2.5.1 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 11609.13 11609.13 9.32 False None None False None False 108197.0916 0 4042980 156904 None 2.5.1 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates First floor Cum 11677.42 11677.42 8.69 False None None False None False 101476.7798 0 4042981 156904 None 2.5.1 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Second floor Cum 11745.71 11745.71 1.566 False None None False None False 18393.78186 0 4042982 156904 None 6.33 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications Sqm 1267.93 1267.93 423.62 False None None False None False 537120.5066 0 4042983 156904 None 6.33 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/cum and minimum compressive strength of 4.00 N/msqm conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications.(Page No.17 /Item No.6.33 Volume-2 SR of 2023-24) First floor Sqm 1280.61 1280.61 476.46 False None None False None False 610159.4406 0 4042984 156904 None 6.33 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/cum and minimum compressive strength of 4.00 N/msqm conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications.(Page No.17 /Item No.6.33 Volume-2 SR of 2023-24) Second floor Sqm 1293.29 1293.29 124.23 False None None False None False 160665.4167 0 4042985 156904 None 2.5.1 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirementsof relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (Page No.16/Item No.2.5.1 Volume-2 SR of 2023-24) Ground floor Cum 10926.24 10926.24 22.95 False None None False None False 250757.208 0 4042986 156904 None 2.5.1 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirementsof relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (Page No.16/Item No.2.5.1 Volume-2 SR of 2023-24) For First floor Cum 10994.53 10994.53 21.16 False None None False None False 232644.2548 0 4042987 156904 None 2.5.1 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirementsof relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (Page No.16/Item No.2.5.1 Volume-2 SR of 2023-24) For Roof slab Ground floor Cum 10243.35 10243.35 46.04 False None None False None False 471603.834 0 4042988 156904 None 2.5.1 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirementsof relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (Page No.16/Item No.2.5.1 Volume-2 SR of 2023-24) For roof slab First floor Cum 10311.64 10311.64 41.54 False None None False None False 428345.5256 0 4042989 156904 None 2.5.1 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirementsof relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (Page No.16/Item No.2.5.1 Volume-2 SR of 2023-24) For roof slab Second floor Cum 10379.93 10379.93 4.63 False None None False None False 48059.0759 0 4042990 156904 None 2.5.1 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirementsof relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (Page No.16/Item No.2.5.1 Volume-2 SR of 2023-24) For Staircase Ground floor to First floor Cum 10243.35 10243.35 10.18 False None None False None False 104277.303 0 4042991 156904 None 2.5.1 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirementsof relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (Page No.16/Item No.2.5.1 Volume-2 SR of 2023-24) For Staircase First floor Cum 10210.2 10210.2 4.68 False None None False None False 47783.736 0 4042992 156904 None 2.5.1 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirementsof relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (Page No.16/Item No.2.5.1 Volume-2 SR of 2023-24) For Staircase Second floor Cum 10276.5 10276.5 0.32 False None None False None False 3288.48 0 4042993 156904 None 8.3.1 Providing 20 mm cement plaster of mix :1:4 (1 ement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge (Page No.41 /Item No.8.3.1 Volume-2 SR of 2023-24) for external wall plastering Ground floor Sqm 364.62 364.62 330.38 False None None False None False 120463.1556 0 4042994 156904 None 8.3.1 Providing 20 mm cement plaster of mix :1:4 (1 ement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge (Page No.41 /Item No.8.3.1 Volume-2 SR of 2023-24) For External wall Plastering First floor Sqm 368.27 368.27 362.0 False None None False None False 133313.74 0 4042995 156904 None 8.3.1 Providing 20 mm cement plaster of mix :1:4 (1 ement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge (Page No.41 /Item No.8.3.1 Volume-2 SR of 2023-24) For External wall Plastering Second floor Sqm 371.91 371.91 186.18 False None None False None False 69242.2038 0 4042996 156904 None 8.1.2 Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifiations and as per directions of Engineer-in-charge (Page No.43 /Item No.8.1.2 Volume-2 SR of 2023-24) For Ceiling plastering. Sqm 248.23 248.23 287.07 False None None False None False 71259.3861 0 4042997 156904 None 8.1.2 Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifiations and as per directions of Engineer-in-charge (Page No.43 /Item No.8.1.2 Volume-2 SR of 2023-24) For Ceiling plastering. First floor Sqm 250.71 250.71 287.63 False None None False None False 72111.7173 0 4042998 156904 None 8.1.2 Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifiations and as per directions of Engineer-in-charge (Page No.43 /Item No.8.1.2 Volume-2 SR of 2023-24) For Ceiling plastering. Staircase head room ceiling Sqm 253.19 253.19 28.72 False None None False None False 7271.6168 0 4042999 156904 None 8.8 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge (Page No.42 /Item No.8.8 Volume-2 SR of 2023-24) For Internal wall plastering. Ground Floor Sqm 382.13 382.13 854.62 False None None False None False 326575.9406 0 4043000 156904 None 8.8 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge (Page No.42 /Item No.8.8 Volume-2 SR of 2023-24) For Internal wall plastering. First Floor Sqm 385.95 385.95 942.18 False None None False None False 363634.371 0 4043001 156904 None 8.8 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge (Page No.42 /Item No.8.8 Volume-2 SR of 2023-24) For Internal wall plastering. Second Floor Sqm 389.77 389.77 73.74 False None None False None False 28741.6398 0 4043002 156904 None 7.18 Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, curing complete as per specifications.(Page No.23 /Item No.7.18 Volume-2 SR of 2023-24) Cum 2098.29 2098.29 13.32 False None None False None False 27949.2228 0 4043003 156904 None 2.1.6 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications.Mix 1:2:4 Using 20 mm nominal size graded crushed coarse aggregates (Page No.15 /Item No.2.1.6 Volume-1 SR of 2023-24) Cum 6430.29 6430.29 17.71 False None None False None False 113880.4359 0 4043004 156904 None 9.39 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. (Page No.65 /Item No.9.39 Volume-2 SR of 2023-24) Ground Floor skirting tiles Sqm 1492.47 1492.47 96.91 False None None False None False 144635.2677 0 4043005 156904 None 9.39 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. (Page No.65 /Item No.9.39 Volume-2 SR of 2023-24) First Floor skirting tiles Sqm 1507.39 1507.39 108.51 False None None False None False 163566.8889 0 4043006 156904 None 9.17.2 Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. complete Size of Tile 600x600 mm (Page No.61 /Item No.9.17.2 Volume-2 SR of 2023-24) Ground floor Sqm 1210.25 1210.25 262.43 False None None False None False 317605.9075 0 4043007 156904 None 9.17.2 Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. complete Size of Tile 600x600 mm (Page No.61 /Item No.9.17.2 Volume-2 SR of 2023-24) First floor Sqm 1222.35 1222.35 267.52 False None None False None False 327003.072 0 4043008 156904 None 9.20.5 Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge. Size of Tile 600x1200 mm (Page No.62 /Item No.9.20.5 Volume-2 SR of 2023-24) Ground Floor Sqm 108.15 108.15 292.43 False None None False None False 31626.3045 0 4043009 156904 None 9.20.5 Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge. Size of Tile 600x1200 mm (Page No.62 /Item No.9.20.5 Volume-2 SR of 2023-24) First Floor Sqm 109.23 109.23 267.52 False None None False None False 29221.2096 0 4043010 156904 None 9.24 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. ** Polished Granite stone slab Black, Cherry Red, Brown, Cat Eye, River Pink or equivalent (Page No.63 / Item No.9.24 Volume-2 SR of 2023-24) Ground Floor Sqm 2937.56 2937.56 49.27 False None None False None False 144733.5812 0 4043011 156904 None 9.24 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. ** Polished Granite stone slab Black, Cherry Red, Brown, Cat Eye, River Pink or equivalent (Page No.63 / Item No.9.24 Volume-2 SR of 2023-24) First Floor Sqm 2966.08 2966.08 34.38 False None None False None False 101973.8304 0 4043012 156904 None 8.51 Providing and applying white cement based putty of averagethickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. (Page No.50 /Item No.8.51 Volume-2 SR of 2023-24) Ground Floor Sqm 103.0 103.0 1044.78 False None None False None False 107612.34 0 4043013 156904 None 8.51 Providing and applying white cement based putty of averagethickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. (Page No.50 /Item No.8.51 Volume-2 SR of 2023-24) First Floor Sqm 104.03 104.03 1121.3 False None None False None False 116648.839 0 4043014 156904 None 8.51 Providing and applying white cement based putty of averagethickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. (Page No.50 /Item No.8.51 Volume-2 SR of 2023-24) Second Floor Sqm 105.06 105.06 102.46 False None None False None False 10764.4476 0 4043015 156904 None 8.33..1 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 ltr/10 m² over and including one coat of Special primer applied @ 0.75 ltr /10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (Page No.46 /Item No.8.33.1 Volume-2 SR of 2023-24) Ground Floor Sqm 162.74 162.74 1044.78 False None None False None False 170027.4972 0 4043016 156904 None 8.33.1 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 ltr/10 m² over and including one coat of Special primer applied @ 0.75 ltr /10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (Page No.46 /Item No.8.33.1 Volume-2 SR of 2023-24) First Floor Sqm 164.37 164.37 1121.3 False None None False None False 184308.081 0 4043017 156904 None 8.33.1 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 ltr/10 m² over and including one coat of Special primer applied @ 0.75 ltr /10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (Page No.46 /Item No.8.33.1 Volume-2 SR of 2023-24) second Floor Sqm 165.99 165.99 138.95 False None None False None False 23064.3105 0 4043018 156904 None 8.29 Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 ltr/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge (Page No.45 /Item No.8.29 Volume-2 SR of 2023-24) For External wall Ground Floor Sqm 291.49 291.49 330.38 False None None False None False 96302.4662 0 4043019 156904 None 8.29 Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 ltr/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge (Page No.45 /Item No.8.29 Volume-2 SR of 2023-24) For External wall First Floor Sqm 294.4 294.4 362.0 False None None False None False 106572.8 0 4043020 156904 None 8.29 Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 ltr/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge (Page No.45 /Item No.8.29 Volume-2 SR of 2023-24) For External wall Second Floor Sqm 297.32 297.32 219.52 False None None False None False 65267.6864 0 4043021 156904 None 4.5 Treatment at points of contact of wood work by chemical emulsion Chlorpyriphos/ Lindane (in oil or kerosene based solution) @ 0.5 litres per hole by drilling 6 mm dia holes at downward angle of 45 degree at 150 mm centre to centre and sealing the same. (Page No.5/Item No.4.5 Volume-2 SR of 2023-24) Ground Floor Mtr 360.5 360.5 31.0 False None None False None False 11175.5 0 4043022 156904 None 4.5 Treatment at points of contact of wood work by chemical emulsion Chlorpyriphos/ Lindane (in oil or kerosene based solution) @ 0.5 litres per hole by drilling 6 mm dia holes at downward angle of 45 degree at 150 mm centre to centre and sealing the same. (Page No.5/Item No.4.5 Volume-2 SR of 2023-24) First Floor Mtr 364.11 364.11 43.6 False None None False None False 15875.196 0 4043023 156904 None 12.89 Providing & fixing of 2.5 track 2 panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 94mm width x 45mm height with reinforcement of 1mm thickness and Sash with overall size of 39mm x 58mm with GI reinforcement of 1.5mm and mesh sash of size 25mm x 42mm. Coextruded Glazing bead for fixing of glass shall be of size 20mmx24 mm. Windows shall be provided with 5mm plain float glass, standard hardware& single point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 1819mm x 1819mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) (Page No.110 /Item No.12.89 Volume-2 SR of 2023-24) Ground Floor Sqm 6747.53 6747.53 26.1 False None None False None False 176110.533 0 4043024 156904 None 12.89 Providing & fixing of 2.5 track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 94mm width x 45mm height with reinforcement of 1mm thickness and Sash with overall size of 39mm x 58mm with GI reinforcement of 1.5mm and mesh sash of size 25mm x 42mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 5mm plain float glass, standard hardware& single point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 1819mm x 1819mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) (Page No.110 /Item No.12.89 Volume-2 SR of 2023-24) First Floor Sqm 6815.01 6815.01 34.2 False None None False None False 233073.342 0 4043025 156904 None 12.89 Providing & fixing of 2.5 track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 94mm width x 45mm height with reinforcement of 1mm thickness and Sash with overall size of 39mm x 58mm with GI reinforcement of 1.5mm and mesh sash of size 25mm x 42mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 5mm plain float glass, standard hardware& single point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 1819mm x 1819mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) (Page No.110 /Item No.12.89 Volume-2 SR of 2023-24) Second Floor Sqm 6882.48 6882.48 6.75 False None None False None False 46456.74 0 4043026 156904 None 12.85 Providing & fixing of louvered ventilator made out of multi chambered UPVC (Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) (Page No.109 /Item No.12.85 Volume-2 SR of 2023-24) Ground Floor Sqm 5890.57 5890.57 2.88 False None None False None False 16964.8416 0 4043027 156904 None 12.85 Providing & fixing of louvered ventilator made out of multi chambered UPVC (Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) (Page No.109 /Item No.12.85 Volume-2 SR of 2023-24) First Floor Sqm 5949.48 5949.48 2.88 False None None False None False 17134.5024 0 4043028 156904 None 11.28 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts) bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge (Page No.85 /Item No.11.28 Volume-2 SR of 2023-24) Ground Floor Kgs 581.95 581.95 234.48 False None None False None False 136455.636 0 4043029 156904 None 11.28 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts) bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge (Page No.85 /Item No.11.28 Volume-2 SR of 2023-24) First Floor Kgs 587.77 587.77 163.66 False None None False None False 96194.4382 0 4043030 156904 None 11.34B Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc (Page No.86 /Item No.11.34.B Volume-2 SR of 2023-24) Ground Floor Kg 188.49 188.49 2333.96 False None None False None False 439928.1204 0 4043031 156904 None 11.34B Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc (Page No.86 /Item No.11.34.B Volume-2 SR of 2023-24) First Floor Kg 190.37 190.37 2597.01 False None None False None False 494392.7937 0 4043032 156904 None 11.34B Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc (Page No.86 /Item No.11.34.B Volume-2 SR of 2023-24) Second Floor Kg 192.26 192.26 348.8 False None None False None False 67060.288 0 4043033 156904 None Approved qotation rate Providing, supplying, cutting and fixing frame with shutters, combination of solid wood handles with lock, hinges, door stopper, tower bolts, aldrops, handles, alround shutters, lipping, wooden beading, shutter frame melamine polish, door closers, necessary glass fitting for shutters with beading, shutter thickness of 32mm etc., complete inlcuding cost and conveyance of all materials, labour for all items of work, HOM of machinery and equipment with all lead and lift, loading and unloading, transportation and all other incidental charges etc., complete as per directions of the Engineer-in-charge of the work. (Approved Quotation Rate) Ground Floor & First Floor Sqm 10000.0 10000.0 77.76 False None None False None False 777600.0 0 1726854029000 0 None None Buildings Construction of new building to Assistant Executive Engineer,Panchayat raj engineering sub-division,Engineering wing,Administrative office,Assistant Executive Engineer,Rural Drinking water and Sanitation sub-division Savanur,Electrification,Water supply ,sanitary works at Savanur Taluk Haveri District.(Water supply and Drainage work) 764822.28 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 4043034 156905 None 10.14.1 Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak proof including jointing of approved type with all labour charges and all lift charges, handling charges including encasing the pipe around to a depth not less than 15 cms with gravel or selected earth available from the excavation etc. complete . 4 Kg/m2: (Page No.120 /Sl.No.10.14.1 , 10.14.3 & 10.14.4 Volume-V SR of 2023-24) 63mm(weight of pipe-0.465 kg) (Code.M150A) Mtr 120.51 120.51 15.0 False None None False None False 1807.65 0 4043035 156905 None 10.14.3 Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak proof including jointing of approved type with all labour charges and all lift charges, handling charges including encasing the pipe around to a depth not less than 15 cms with gravel or selected earth available from the excavation etc. complete . 4 Kg/m2: (Page No.120 /Sl.No.10.14.1 , 10.14.3 & 10.14.4 Volume-V SR of 2023-24) 90mm(weight of pipe -0.917 kg) (Code.M150C) Mtr 216.3 216.3 84.0 False None None False None False 18169.2 0 4043036 156905 None 10.14.4 Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak proof including jointing of approved type with all labour charges and all lift charges, handling charges including encasing the pipe around to a depth not less than 15 cms with gravel or selected earth available from the excavation etc. complete . 4 Kg/m2: (Page No.120 /Sl.No.10.14.1 , 10.14.3 & 10.14.4 Volume-V SR of 2023-24) 110mm(weight of pipe-1.315 kg) (Code.M150D) Mtr 290.46 290.46 108.0 False None None False None False 31369.68 0 4043037 156905 None 10.14.20 Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak proof including jointing of approved type with all labour charges and all lift charges, handling charges including encasing the pipe around to a depth not less than 15 cms with gravel or selected earth available from the excavation etc. complete 8 Kg/m2: (Page No.120 /Sl.No.10.14.20 Volume-V SR of 2023-24) 160mm(weight of pipe -3.923 kg) (Code.M150 T) Mtr 864.17 864.17 30.0 False None None False None False 25925.1 0 4043038 156905 None 13.32.4 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. (Page No. 122 Item No.13.32.4 & 13.32.3 Volume-2 SR of 2023-24) 32mm nominal dia Pipes Mtr 573.71 573.71 200.0 False None None False None False 114742.0 0 4043039 156905 None 13.32.3 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. (Page No. 122 Item No.13.32.4 & 13.32.3 Volume-2 SR of 2023-24) 25mm nominal dia Pipes Mtr 491.31 491.31 120.0 False None None False None False 58957.2 0 4043040 156905 None 13.33.6 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in charge. External work. (Page No. 122 Item No.13.33.6 & 13.33.4 Volume-2 SR of 2023-24) Mtr 742.63 742.63 180.0 False None None False None False 133673.4 0 4043041 156905 None 13.33.4 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in charge. External work. (Page No. 122 Item No.13.33.6 & 13.33.4 Volume-2 SR of 2023-24) 32mm nominal dia Pipes Mtr 383.16 383.16 180.0 False None None False None False 68968.8 0 4043042 156905 None 10.11.7 Supply and delivery at site special moulded variety PVC bend as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments (Page No.118 /Sl.No.10.11.7 & 10.11.8 Volume-V SR of 2023-24) 90 mm dia PVC BEND (Code.M 120 G) Nos 401.7 401.7 10.0 False None None False None False 4017.0 0 4043043 156905 None 10.11.8 Supply and delivery at site special moulded variety PVC bend as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments (Page No.118 /Sl.No.10.11.7 & 10.11.8 Volume-V SR of 2023-24) 110 mm dia PVC BEND (Code.M 120 H) Nos 506.76 506.76 10.0 False None None False None False 5067.6 0 4043044 156905 None 10.9.8 Supply and delivery at site special moulded variety PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments. (Page No.117 /Sl.No.10.9.8 , 10.9.7 & 10.9.4 Volume-V SR of 2023-24) 110 mm dia PVC Elbows (Code M100 H) Nos 311.06 311.06 100.0 False None None False None False 31106.0 0 4043045 156905 None 10.9.7 Supply and delivery at site special moulded variety PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments. (Page No.117 /Sl.No.10.9.8 , 10.9.7 & 10.9.4 Volume-V SR of 2023-24) 90 mm dia PVC Elbows (Code M100 G) Nos 284.28 284.28 38.0 False None None False None False 10802.64 0 4043046 156905 None 10.9.4 Supply and delivery at site special moulded variety PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments. (Page No.117 /Sl.No.10.9.8 , 10.9.7 & 10.9.4 Volume-V SR of 2023-24) 50 mm dia PVC Elbows (Code M100 D) Nos 67.98 67.98 21.0 False None None False None False 1427.58 0 4043047 156905 None 10.13.8 Supply and delivery at site special moulded variety PVC reducer as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments (Page No.119 /Sl.No.10.13.8 , 10.13.7 & 10.13.4 Volume-V SR of 2023-24) 110 mm dia PVC REDUCER (Code M140 H) Nos 268.83 268.83 40.0 False None None False None False 10753.2 0 4043048 156905 None 10.13.7 Supply and delivery at site special moulded variety PVC reducer as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments (Page No.119 /Sl.No.10.13.8 , 10.13.7 & 10.13.4 Volume-V SR of 2023-24) 90 mm dia PVC REDUCER (Code M140 G) Nos 152.44 152.44 40.0 False None None False None False 6097.6 0 4043049 156905 None 10.13.4 Supply and delivery at site special moulded variety PVC reducer as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments (Page No.119 /Sl.No.10.13.8 , 10.13.7 & 10.13.4 Volume-V SR of 2023-24) 50 mm dia PVC REDUCER (Code M140 D) Nos 60.77 60.77 40.0 False None None False None False 2430.8 0 4043050 156905 None 10.10.7 Supply and delivery at site special moulded variety PVC tee as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments (Page No.117 /Sl.No.10.10.7 & 10.10.8 Volume-V SR of 2023-24) 90 mm dia PVC Tee (Code M110 G) Nos 176.13 176.13 50.0 False None None False None False 8806.5 0 4043051 156905 None 10.10.8 Supply and delivery at site special moulded variety PVC tee as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments (Page No.117 /Sl.No.10.10.7 & 10.10.8 Volume-V SR of 2023-24) 110 mm dia PVC Tee (Code M110 H) Nos 258.53 258.53 50.0 False None None False None False 12926.5 0 4043052 156905 None 13.8.2.2 Providing and fixing unplasticised PVC connection pipe with brass unions : 45 cm length 20 mm nominal bore (Page No.118 /Item No.13.8.2.2 Volume-2 SR of 2023-24) Nos 113.3 113.3 16.0 False None None False None False 1812.8 0 4043053 156905 None 13.22.2 Providing and fixing PTMT grating of approved quality and colour. Rectangular type with openable circular lid (Page No.120/Item No.13.22.2 Volume-2 SR of 2023-24) Nos 208.06 208.06 16.0 False None None False None False 3328.96 0 4043054 156905 None 13.24 Providing and fixing PTMT angle stop cock 15 mm nominal bore, weighing not less than 85 g (Page No.121 /Item No.13.24 Volume-2 SR of 2023-24) Nos 170.98 170.98 12.0 False None None False None False 2051.76 0 4043055 156905 None 13.4.6 Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) : 80 mm nominal bore (Page No.117/Item No.13.4.6 Volume-2 SR of 2023-24) Nos 2139.31 2139.31 14.0 False None None False None False 29950.34 0 4043056 156905 None 14.5.1 Providing and fixing white vitreous china flat back half stall urinal of size 580x 380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls andfloors wherever required : Single half stall urinal with 5 litre P.V.C. automatic flushing cistern (Page No.132 /Item No.14.5.1, Volume-2 SR of 2023-24) Nos 8901.26 8901.26 4.0 False None None False None False 35605.04 0 4043057 156905 None 14.7.3 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps (Page No.132 /Item No.14.7.3 Volume-2 SR of 2023-24) Nos 2951.98 2951.98 6.0 False None None False None False 17711.88 0 4043058 156905 None 10.8 Providing and fixing granite stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in- charge and finished smooth. (Page No.70 /Item No.10.8 Volume-2 SR of 2023-24) Sqm 2872.67 2872.67 2.1 False None None False None False 6032.607 0 4043059 156905 None 14.3.1 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid (Page No.131 /Item No.14.3.1, Volume-2 SR of 2023-24) Nos 6156.31 6156.31 4.0 False None None False None False 24625.24 0 4043060 156905 None 14.7B Providing and fixing wash basin with C.I. brackets, 15 mm PTMT pillar cock, 32 mm PTMT waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm PTMT pillar cock. s (Page No.133 /Item No.14.7B Volume-2 SR of 2023-24) Nos 2364.88 2364.88 8.0 False None None False None False 18919.04 0 4043061 156905 None 14.42 Providing and fixing PTMT 15 mm Urinal spreader size 95x69x100 mm with 1/2" BSP thread and shapes, weighing not less than 60 g. (Page No.138 /Item No.14.42, Volume-2 SR of 2023-24) Nos 94.76 94.76 4.0 False None None False None False 379.04 0 4043062 156905 None 14.22A Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge. (Page No.135/Item No.14.22A Volume-2 SR of 2023-24) Nos 834.3 834.3 6.0 False None None False None False 5005.8 0 4043063 156905 None 14.47 Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge. (Page No.138/Item No.14.47 Volume-2 SR of 2023-24) Nos 14638.36 14638.36 2.0 False None None False None False 29276.72 0 4043064 156905 None 13.48 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type-A, including jointing with seal ring conforming to IS : 5382, leaving 10mm gap for thermal expansion (i) Single socketed pipes 100mm diameter. (Page No.125/Item No.13.48 Volume-2 SR of 2023-24) Mtr 299.73 299.73 20.0 False None None False None False 5994.6 0 4043065 156905 None 13.34 Providing and placing on terrace (at all floor levels) Polyethylene water storage tank, IS:12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fitting and the base support for tank. (Page No.123/Item No.13.34 Volume-2 SR of 2023-24) Ltr 9.27 9.27 4000.0 False None None False None False 37080.0 0 1726854029000 0 None None Buildings Construction of new building to Assistant Executive Engineer,Panchayat raj engineering sub-division,Engineering wing,Administrative office,Assistant Executive Engineer,Rural Drinking water and Sanitation sub-division Savanur,Electrification,Water supply ,sanitary works at Savanur Taluk Haveri District.(Electrical works) 1712512.0 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 4043066 156906 None 1.2 Conceiled Conduit System Supplying heavy gauge PVC conduit pipe . mm dia.mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary. (Page No.2/Item No. 1.2 Ele. SR of 2023-24) Mtr 80.34 80.34 900.0 False None None False None False 72306.0 0 4043067 156906 None 1.2 Conceiled Conduit System Supplying heavy gauge PVC conduit pipe . mm dia.mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary. (Page No.2/Item No. 1.2 Ele. SR of 2023-24) 32 mm dia 2.5mm thick. (Item No.1.2.3) Mtr 106.09 106.09 100.0 False None None False None False 10609.0 0 4043068 156906 None 1.5.2 Supplying and fixing PVC/metal conduit Deep junction box.25mm deep junction box (Page No.3/Item No.1.5.2 Ele. SR of 2023-24) Nos 57.68 57.68 180.0 False None None False None False 10382.4 0 4043069 156906 None 1.13 Supplying And Fixing Metal Fan Box with Round Hook. (Page No.4/Item No.1.13 Ele. SR of 2023-24) Nos 120.51 120.51 30.0 False None None False None False 3615.3 0 4043070 156906 None 1.3.2 Supplying heavy gauge PVC Conduit Pipe ….dia .mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering up to the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary. (Page No.2/ Item No.1.3 Ele. SR of 2023-24) 25mm dia 2mm thick. (Item No.1.3.2) Mtr 81.37 81.37 800.0 False None None False None False 65096.0 0 4043071 156906 None 1.3.3 Supplying heavy gauge PVC Conduit Pipe ….dia .mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering up to the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary. (Page No.2/ Item No.1.3 Ele. SR of 2023-24) 32 mm dia 2.5mm thick. (Item No.1.3.3) Mtr 101.97 101.97 100.0 False None None False None False 10197.0 0 4043072 156906 None 12.2.3 Supplying and fixing one of 230 volts Ding dong bell and a flush type bell push with gang box fixed on necessary wooden or rawl plugs using NF screws with Remote. (Page No.48 /Item No.12.2.3 Ele. SR of 2023-24) Nos 1225.7 1225.7 3.0 False None None False None False 3677.1 0 4043073 156906 None 2.2.2 Point wiring using Copper wire without switch.Supplying and wiring adopting loop system in existing PVC Conduit/casing capping using 1100V Grade, COPPER conductor flexible multistrand FRLS PVC insulated, 2x1.5 Sq.mm Cable confirming to the GTP without switch, the other end of the wires shall be terminated with sufficient loose lenght in a wood/PVC round block. complete for each outlet. Using class A Materials . (Page No.5 /Item No. 2.2.2 & 2.2.3 Ele. SR of 2023-24) Medium point above 3mtr up to 6Mtr from tapping point to out let via switch. Point 390.37 390.37 25.0 False None None False None False 9759.25 0 4043074 156906 None 2.2.3 Point wiring using Copper wire without switch.Supplying and wiring adopting loop system in existing PVC Conduit/casing capping using 1100V Grade, COPPER conductor flexible multistrand FRLS PVC insulated, 2x1.5 Sq.mm Cable confirming to the GTP without switch, the other end of the wires shall be terminated with sufficient loose lenght in a wood/PVC round block. complete for each outlet. Using class A Materials . (Page No.5 /Item No. 2.2.2 & 2.2.3 Ele. SR of 2023-24) Above 6Mtr up to 10Mtr from tapping Point to out let via switch. Point 571.65 571.65 100.0 False None None False None False 57165.0 0 4043075 156906 None 1.9.2 Supplying PVC flexible conduit pipe…mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300mm using NF screws and on either end of the pipe terminated completely. 25mm (Page No.3 /Item No. 1.9.2 Ele. SR of 2023-24) Mtr 22.66 22.66 250.0 False None None False None False 5665.0 0 4043076 156906 None 2.3.2 Wiring for lighting/Power circuit using one of FRLS PVC insulated 1100v grade, multistrand Copper With Low conductor resistance single core wire in open or conceanled system of wiring with specified IS-694:1990 & confirming to the attached. Group "A" (Page No.5 /Item No.2.3 Electrical SR of 2023-24) 1.5 sqmm (2.3.2) Mtr 26.78 26.78 1050.0 False None None False None False 28119.0 0 4043077 156906 None 2.3.3 Wiring for lighting/Power circuit using one of FRLS PVC insulated 1100v grade, multistrand Copper With Low conductor resistance single core wire in open or conceanled system of wiring with specified IS-694:1990 & confirming to the attached. Group "A" (Page No.5 /Item No.2.3 Electrical SR of 2023-24) 2.5 sqmm (2.3.3) Mtr 43.26 43.26 1800.0 False None None False None False 77868.0 0 4043078 156906 None 2.3.4 Wiring for lighting/Power circuit using one of FRLS PVC insulated 1100v grade, multistrand Copper With Low conductor resistance single core wire in open or conceanled system of wiring with specified IS-694:1990 & confirming to the attached. Group "A" (Page No.5 /Item No.2.3 Electrical SR of 2023-24) 4 sqmm (2.3.4) Mtr 64.89 64.89 900.0 False None None False None False 58401.0 0 4043079 156906 None 2.3.5 Wiring for lighting/Power circuit using one of FRLS PVC insulated 1100v grade, multistrand Copper With Low conductor resistance single core wire in open or conceanled system of wiring with specified IS-694:1990 & confirming to the attached. Group "A" (Page No.5 /Item No.2.3 Electrical SR of 2023-24) 6 sqmm.(2.3.5) Mtr 94.76 94.76 150.0 False None None False None False 14214.0 0 4043080 156906 None 3.4.2 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall (Page No.3 /Item No.3.4 Electrical SR of 2023-24) 3 Way (3.4.2) Nos 163.77 163.77 10.0 False None None False None False 1637.7 0 4043081 156906 None 3.4.3 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall (Page No.3 /Item No.3.4 Electrical SR of 2023-24) 4-5 Way (3.4.3) Nos 182.31 182.31 5.0 False None None False None False 911.55 0 4043082 156906 None 3.4.5 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall (Page No.3 /Item No.3.4 Electrical SR of 2023-24) 8 Way (3.4.5) Nos 268.83 268.83 13.0 False None None False None False 3494.79 0 4043083 156906 None 3.4.6 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall (Page No.3 /Item No.3.4 Electrical SR of 2023-24) 10-12 Way (3.4.6) Nos 328.57 328.57 25.0 False None None False None False 8214.25 0 4043084 156906 None 3.4.8 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall (Page No.3 /Item No.3.4 Electrical SR of 2023-24) 18 Way (3.4.8) Nos 417.15 417.15 10.0 False None None False None False 4171.5 0 4043085 156906 None 3.5.2 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. (Page No.3 /Item No.3.5 Electrical SR of 2023-24) 3 Module. (Item No.3.5.2) Nos 165.83 165.83 10.0 False None None False None False 1658.3 0 4043086 156906 None 3.5.3 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc complete on the existing metal/PVC box. (Page No.3 /Item No.3.5 Electrical SR of 2023-24) 4 Moudule.(Item No.3.5.3) Nos 180.25 180.25 5.0 False None None False None False 901.25 0 4043087 156906 None 3.5.5 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. (Page No.3 /Item No.3.5 Electrical SR of 2023-24) 8 Module. (Item No.3.5.5) Nos 292.52 292.52 13.0 False None None False None False 3802.76 0 4043088 156906 None 3.5.6 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. (Page No.3 /Item No.3.5 Electrical SR of 2023-24) 10-12 Module. (Item No.3.5.6) Nos 354.32 354.32 30.0 False None None False None False 10629.6 0 4043089 156906 None 3.5.8 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. (Page No.3 /Item No.3.5 Electrical SR of 2023-24) 18 Module. (Item No.3.5.8) Nos 470.71 470.71 10.0 False None None False None False 4707.1 0 4043090 156906 None 3.6 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. (Page No.9/Item No.3.6 Electrical SR of 2023-24) 6 Amps one way. Nos 105.06 105.06 300.0 False None None False None False 31518.0 0 4043091 156906 None 3.6 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. (Page No.9/Item No.3.6 Electrical SR of 2023-24) 6 Amps Two way Nos 170.98 170.98 4.0 False None None False None False 683.92 0 4043092 156906 None 3.6 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. (Page No.9/Item No.3.6 Electrical SR of 2023-24) 6Amps 3way socket. Nos 176.13 176.13 125.0 False None None False None False 22016.25 0 4043093 156906 None 3.6 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. (Page No.9/Item No.3.6 Electrical SR of 2023-24) Stepped Fan Regulator. Nos 367.71 367.71 29.0 False None None False None False 10663.59 0 4043094 156906 None 3.6 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. (Page No.9/Item No.3.6 Electrical SR of 2023-24) 32Amps DP switch. Nos 335.78 335.78 23.0 False None None False None False 7722.94 0 4043095 156906 None 3.6 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. (Page No.9/Item No.3.6 Electrical SR of 2023-24) 6/16Amps universal socket. Nos 243.08 243.08 23.0 False None None False None False 5590.84 0 4043096 156906 None 5.19.11 Supplying and fixing regular MCB Distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts with provision for fixing suitable type capacity MCB's single phase / 3 phase / single door with powder coated painting. Made out of 14 SWG M.S enclosure. III-Double Door (Page No.18 / Item No.5.19.11, 5.19.13 Electrical SR of 2023-24) 4 Way TP & N Nos 4159.14 4159.14 3.0 False None None False None False 12477.42 0 4043097 156906 None 5.19.13 Supplying and fixing regular MCB Distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts with provision for fixing suitable type capacity MCB's single phase / 3 phase / single door with powder coated painting. Made out of 14 SWG M.S enclosure. III-Double Door (Page No.18 / Item No.5.19.11, 5.19.13 Electrical SR of 2023-24) 8 Way TP & N Nos 6273.73 6273.73 3.0 False None None False None False 18821.19 0 4043098 156906 None 5.18.4 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' cure, indicator ON/OFF, energy cross-3 with Short circuit breaking cappacity of 10K and complete wiring as required. Confirming to IEC 60898. (Page No.17 / Item No.5.18 Electrical SR of 2023-24) 6-32 Amps DP (Item 5.18.4) Nos 761.17 761.17 42.0 False None None False None False 31969.14 0 4043099 156906 None 5.18.9 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' cure, indicator ON/OFF, energy cross-3 with Short circuit breaking cappacity of 10K and complete wiring as required. Confirming to IEC 60898. (Page No.17 / Item No.5.18 Electrical SR of 2023-24) 50-63Amps TP&N. (Item 5.18.9) Nos 3180.64 3180.64 6.0 False None None False None False 19083.84 0 4043100 156906 None 11.10.5 Supplying & fixing of Surface mounting type retrofit type LED tube . W comprising of LED linear source with CCT 6500 degree K, CRI 70%. efficacy 80 lumen per W, life 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF 0.95, power loss should 5% of lamp Wage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. Polycarbonate/OPAL Acrylic Casing. 18W20W (T8) (Page No.47 / Item No.11.10.5 Electrical SR of 2023-24) Nos 703.49 703.49 76.0 False None None False None False 53465.24 0 4043101 156906 None 11.14.2 Supplying and fixing of slim box fitting, made out of CRCA Sheet metal body with locking type holder completely wired. Excluding Ballast & Fluorescent Tube,Excluding Ballast & Fluorescent Tube . (Page No.47 / Item No.11.14.2 & 11.14.3 Electrical SR of 2023-24) 1 x 4' Tube light fitting. Nos 371.83 371.83 60.0 False None None False None False 22309.8 0 4043102 156906 None 11.14.3 Supplying and fixing of slim box fitting, made out of CRCA Sheet metal body with locking type holder completely wired. Excluding Ballast & Fluorescent Tube,Excluding Ballast & Fluorescent Tube . (Page No.47 / Item No.11.14.2 & 11.14.3 Electrical SR of 2023-24) 2 x 4' Tube light fitting. Nos 433.63 433.63 28.0 False None None False None False 12141.64 0 4043103 156906 None 11.6.5 Supplying of recess mounting non integral type LED wluminaire comprising of pressure decast/extruded aluminium housing,with spring loaded false ceiling clamps, Power LEDs with CCT 6500degree K, CRI70%. efficacy 100 lumen per W, 120degree beamspread, life 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The lamp compartment is enclosed withanti glare opal diffuser which enhances the lighting level LEDs are driven by HF electronic driver integrated in a separate control gear assembly., with PF 0.95, power loss should 5% of lamp Wage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. LED modular down light 1x4 34 36W (Page No.45 Item No.11.6.5 Electrical SR of 2023-24 Nos 6074.94 6074.94 6.0 False None None False None False 36449.64 0 4043104 156906 None 11.8.4 Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, maximum light intensity should be between 60 degrees to 70 degrees. CCT 5500K, IP66 optical and electrical compartment & impact resistance of complete luminaire IK08. Power Factor 0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mounting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with .150.W System Power consumption.LED StreetlightLED Streetlight 90 Watts (Page No.46 / Item No.11.8.4 Electrical SR of 2023-24) Nos 9125.8 9125.8 2.0 False None None False None False 18251.6 0 4043105 156906 None 5.43.2 Supply and Installation / Fixing / Provision of Pole box with HRC Fuse / MCB provision and suitable connector / terminal for 3 Ph/ 1 Ph connections with Loop-In & Loop- Out terminals for 10 Sqmm /25 Sqmm 3.5 C AI/Ar/Cu/Ar Cable and branch out 2.5 Sqmm 2 core AI/Cu PVC Insulated cable, enclosed in a Thermoplastic, Polystyrene enclosure, which should be shock proof, safe, IP65(Weather Proof), rust proof, dust proof, water proof having Internally Embedded Gasket with provision for cable entry through IP65 Thermoplastic, polyamide glands and/or grommets. (5.43) 260mm x 210mm x 116mm (Page No.20 / Item No.5.43.2 Electrical SR of 2023-24) Nos 2544.1 2544.1 4.0 False None None False None False 10176.4 0 4043106 156906 None 13.2.3 Supplying and Fixing.mm dia class A GI pipe bracket up to 2.7 meters long terminated with a reducing collar of 40x25mm to which extra pipe of 175mm length is fixed for fixing MV/SV/MH/FTL street light fitting of all capacities on rail/RCC/wall/tubular pole, using suitable clamps, bolts, nuts and wiring using suitable capacity wires. (13.2) Using 40mm dia G.I.Pipe (Page No.56 / Item No.13.2.3 Electrical SR of 2023-24) Nos 1522.34 1522.34 4.0 False None None False None False 6089.36 0 4043107 156906 None 13.7.1 Fixing all types and all capacities of fluorescent/False ceiling/spot light /CFL/LED fittings indoor on the wall/ ceiling/ rafters/girders using 23/0.0076' twin twisted PVC insulated wires, required Nos of round blocks and clamps.On wall / ceiling /Rafter / Girders. (Page No.56 / Item No.13.7.1 & 13.7.2 Electrical SR of 2023-24) Nos 125.66 125.66 88.0 False None None False None False 11058.08 0 4043108 156906 None 13.7.2 Fixing all types and all capacities of fluorescent/False ceiling/spot light /CFL/LED fittings indoor on the wall/ ceiling/ rafters/girders using 23/0.0076' twin twisted PVC insulated wires, required Nos of round blocks and clamps.On wall / ceiling /Rafter / Girders. (Page No.56 / Item No.13.7.1 & 13.7.2 Electrical SR of 2023-24) Using necessary length of G.I.chain. (Item 13.7.2) Nos 270.89 270.89 12.0 False None None False None False 3250.68 0 4043109 156906 None 6.4.1 Supplying of Ceiling Fan with Capacitor rating As per guideline of BEE 5 star rating and IS:374/79 and also comply with IS: 1709/1984 with latest amendment, Rated voltage 220 V/50 Hz, Rated power input 48 W +/- 10 %, Rated current As per IS:374/79, Rated power factor 0.9 lagging(min), Rated speed 350 +/- 10% RPM, Rated air delivery 210 +/- 10% Cubic Meter Minimum, Rated service value 4.2 CMM / W, Three Blades of blade leaf 1.05 mm thick Aluminium Alloy sheet, Class B motor insulation, Bearing Two ball bearings, Top 6202, Bottom 6201, as per IS specification, Motor winding. Temp rise Shall not exceed 75 deg C over and ambient of 40 0C by resistance method at 245 V, Insulation resistance Shall not be less than Two Mega Ohms (2M Ohms), Leakage current Should not exceed 210 Micro Amp, Power input, W& current, Air Delivery & Fan Speed as per IS:374/1979 with latest amendment, 2 year manufacturer.48" Sweep 5 Star (1200 mm) (Page No.30 / Item No.6.4.1 Electrical SR of 2023-24) Nos 2757.31 2757.31 20.0 False None None False None False 55146.2 0 4043110 156906 None 6.2.1 Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50HZ, AC Supply complete. 12" Sweep(300mm) (Page No.30 / Item No.6.2.1 Electrical SR of 2023-24) Nos 3058.07 3058.07 10.0 False None None False None False 30580.7 0 4043111 156906 None 13.10 Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing 'S'' hook with fan regulator to the existing board together with supplying and fixing 5 A. ceiling rose, necessary length of 23 / 0.0076 inch PVC insulated twin twisted copper wire and wiring. (Page No.57 / Item No.13.10 Electrical SR of 2023-24) Nos 176.13 176.13 20.0 False None None False None False 3522.6 0 4043112 156906 None 13.13 Fixing one exhaust fan after making a suitable nitch in the wall and finishing with cement mortar and colourign to match the existing wall or brackets, with bolts and nuts and a 5 ampsl,ceiling rose with sufficient length of 23/0.0076 inch PVC insulted twin core wire of approved make with wire mesh and wooden frame. (Page No.57 / Item No.13.13 Electrical SR of 2023-24) Nos 728.21 728.21 10.0 False None None False None False 7282.1 0 4043113 156906 None 1.6.2 Digging of Pit for providing GI Pipe type Earthing (Item No.1.6.2 Hard Soil). Page:43/Item No:1.6.2 ESCOM SR 2023-24. Nos 3079.7 3079.7 4.0 False None None False None False 12318.8 0 4043114 156906 None 51.01 Item No. 54 : Grounding Material : Pipe Earthing : GI Grounding pipe, B - Class, 42 mm dia, 2.5 Mtr long, 3.2 mm thick with bolt, nut, GI Strips and washer complete. Minimum Weight of GI Pipe: 7.3 Kg (Item No. 54.01) Material Code : 281674. Page:22/Item No:51.01 ESCOM SR 2023-24. Nos 765.29 765.29 4.0 False None None False None False 3061.16 0 4043115 156906 None 51.02 Good Quality well burnt Charcoal for grounding purposes packed in non returnable gunny bag of 30 Kg each. (Item No.54.02). Material Code : 600095. Page:22/Item No:51.02 ESCOM SR 2023-24. Nos 696.28 696.28 8.0 False None None False None False 5570.24 0 4043116 156906 None 51.03 Good Quality Salt for grounding purposes packed in 50 Kg gunny bag. (Item No.54.03). Material Code : 607054. Page:22/Item No:51.03 ESCOM SR 2023-24. Nos 319.3 319.3 8.0 False None None False None False 2554.4 0 4043117 156906 None 12.58.11 Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required 600x600x3mm Copper plate Page:55/Item No:12.58.11 Ele SR 2023-24. Nos 7643.63 7643.63 2.0 False None None False None False 15287.26 0 4043118 156906 None 5.42.2 Fabricating supplying and mounting MS box made out … SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 2 coats of red oxide primer paint and finally finished with approved colour enameled metal paint etc.16 SWG (Page No.20 / Item No.5.42.2 Electrical SR of 2023-24) Sq CM 0.44 0.44 50000.0 False None None False None False 22000.0 0 4043119 156906 None 5.34 Supplying, fixing and wiring 50/5 to 400/5Amps 5VA burden Current Transformer. Class 0.5 accuracy with Tape Wound. (Page No.19 / Item No.5.34 Electrical SR of 2023-24) Nos 578.86 578.86 3.0 False None None False None False 1736.58 0 4043120 156906 None 5.33 Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, KVA, KWH,KVAR suitable for 3 phase, 4 wire LT network with IP 54 degree of protection and completely wired as required with communication Port and Class 0.5s accuracy. (Page No.19 / Item No.5.33 Electrical SR of 2023-24) Nos 9594.45 9594.45 1.0 False None None False None False 9594.45 0 4043121 156906 None 5.38 Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C. (Page No.14 / Item No.5.38 Electrical SR of 2023-24) Nos 530.45 530.45 3.0 False None None False None False 1591.35 0 4043122 156906 None 5.21 Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of percentage leakage current, programmable delay/auto/manual reset facility suitable to mount on DIN rail/ flush mounting on panel board. (Page No.18 / Item No.5.21 Electrical SR of 2023-24) Nos 9532.65 9532.65 1.0 False None None False None False 9532.65 0 4043123 156906 None 5.40.2 Supplying . amps rated 3phase with neutral bus bar using required capacity electrolytic aluminum strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete.250Amps 4x30x10mm Aluminum Strips (Page No.20 / Item No.5.40.2 Electrical SR of 2023-24) Nos 3538.05 3538.05 2.0 False None None False None False 7076.1 0 4043124 156906 None 5.12.2 Supplying of on load change over switches 4 poles, AC-23A Duty, 415V, 50Hz, AC Supply. 100Amps (Page No.15 / Item No.5.12.2 Electrical SR of 2023-24) No 8790.02 8790.02 1.0 False None None False None False 8790.02 0 4043125 156906 None 5.15.9 Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuitwith adjustable thermal magnetic release, Micro processor release shall have Earth Fault as per IS/IEC 60947-2 . (Icu=100% lcs). In 4P MCCB, all Poles should have protection for Short-Cicrcuit/Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB. MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism.100 Amps 35kA. (Page No.17/ Item No.5.15.9 Electrical SR of 2023-24) No 8741.61 8741.61 1.0 False None None False None False 8741.61 0 4043126 156906 None 5.41.2 Supplying and fixing angle iron frame work fabricated out of M.S. angle iron. and M.S. flat … with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. 50x50x6mm (Page No.20 / Item No.5.41.2 Electrical SR of 2023-24) Mtr 406.85 406.85 10.0 False None None False None False 4068.5 0 4043127 156906 None 32.05 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975. 16 Sqmm, 3.5 Core, ( 16 Sqmm, 4 Core, (11 GI Strips - 4 x 0.8 mm) ) Page No:13 Item No 32.05,Material Code :287206, Eescom SR 2023-24 Km 146097.26 146097.26 0.12 False None None False None False 17531.6712 0 4043128 156906 None 32.09 35 Sqmm, 3.5 Core, (14 GI Strips - 4 x 0.8 mm) Item No 32.09,Material Code :287059, Bescom SR 2021-22 Km 158683.86 158683.86 0.085 False None None False None False 13488.1281 0 4043129 156906 None 21.05 Labour charges for Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff.LT Cable ( Page No. 52Item No.21.05 & 21.06 ) Escom SR 2023-24. 230 2.5 to 25 Sqmm Km 21512.58 21512.58 0.12 False None None False None False 2581.5096 0 4043130 156906 None 21.06 Labour charges for Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff.LT Cable ( Page No. 52Item No.21.05 & 21.06 ) Escom SR 2023-24. 230 35 sqmm to 95 sqmm Km 32073.17 32073.17 0.085 False None None False None False 2726.21945 0 4043131 156906 None 29.03 Earth work excavation for cable trench of 0.5 to 0.75 Mtr. Width and Depth upto 1 Mtr including trial pits, depositing on bank upto a lead of 50 Mtr, Supplying and Displaying necessary Danger Boards and Lighting, Using sight Rails and Sign Boards at every 100 Mtr wherever necessary as directed.( For Rate Ref : Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work. 1.4.1 In all kinds of soils Depth upto 1.5 m Vol-1 page No:5 KPWD SR 2023-24) ( Item No: 29.03 Page No:63 ESCOMs SR 2023-24) Cum 249.26 249.26 42.0 False None None False None False 10468.92 0 4043132 156906 None 1.2 Conceiled Conduit System upplying heavy gauge PVC conduit pipe dia confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using inverted wood plugs in case of RCC ceiling and RCC wall stone structure or rawl plugs in case of brick walls and cement plastering damaged portion using heavy gauge saddles at an interval of 700mm using NF screws. 25mm dia 2mm thick.(Page No.2 / Item No.1.2 Electrical SR of 2023-24) Mtr 78.0 78.0 900.0 False None None False None False 70200.0 0 4043133 156906 None 1.3 Supplying heavy gauge PVC Conduit Pipe ….dia .mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering up to the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary.25mm dia 2mm thick.(Page No.2 / Item No.1.3 Electrical SR of 2023-24) Mtr 81.37 81.37 300.0 False None None False None False 24411.0 0 4043134 156906 None 8.1 Supplying and drawing UTP-CAT 6E LAN cable.(Page No.36 / Item No.8.1 Electrical SR of 2023-24) Mtr 39.14 39.14 1000.0 False None None False None False 39140.0 0 4043135 156906 None 8.2.5 Supplying and drawing PVC flexible one pair telephone unarmoured tinned copper cable.5Pair (Page No.36 / Item No.8.2.5 Electrical SR of 2023-24) Mtr 47.38 47.38 400.0 False None None False None False 18952.0 0 4043136 156906 None 8.10 Supplying & fixing of I/O socket with back box .(Page No.36 / Item No.8.10 Electrical SR of 2023-24) Each 504.7 504.7 30.0 False None None False None False 15141.0 0 4043137 156906 None 8.10 Supplying & fixing of I/O socket with back box .(Page No.36 / Item No.8.10 Electrical SR of 2023-24) Double I/O Each 566.5 566.5 14.0 False None None False None False 7931.0 0 4043138 156906 None 8.4.3 Supplying & Fixing of switch mounting rack with power manager & Cable manager. .(8.4) 9U with 450mm depth (Page No.36 / Item No.8.4.3 Electrical SR of 2023-24) Each 8730.28 8730.28 2.0 False None None False None False 17460.56 0 4043139 156906 None 8.9.12 Supplying fixing of Network Switches .(Page No.36 / Item No.8.9.12, 8.9.2 Electrical SR of 2023-24) 8 port 10/100/1000 Switch Each 3193.0 3193.0 3.0 False None None False None False 9579.0 0 4043140 156906 None 8.9.2 Supplying fixing of Network Switches .(Page No.36 / Item No.8.9.12, 8.9.2 Electrical SR of 2023-24) 24 Port Gigabyte (manageable) Each 42693.5 42693.5 1.0 False None None False None False 42693.5 0 4043141 156906 None 8.12.2 Supplying & Fixing of Patch panel for LAN cabling (8.12) 24 Port 10/100 patch panel (Page No.37 / Item No.8.12.2 Electrical SR of 2023-24) 24 Port Gigabyte (manageable) Each 4223.0 4223.0 2.0 False None None False None False 8446.0 0 4043142 156906 None 8.11.1 Supplying & Fixing of . Mtrs Cat 6 Patch Cable (Page No.37 / Item No.8.11.1, 8.11.2 Electrical SR of 2023-24) 1 mtr (8.11.1) Mtr 264.71 264.71 19.0 False None None False None False 5029.49 0 4043143 156906 None 8.11.2 Supplying & Fixing of . Mtrs Cat 6 Patch Cable (Page No.37 / Item No.8.11.1, 8.11.2 Electrical SR of 2023-24) 2 mtr (8.11.2) Mtr 264.71 264.71 18.0 False None None False None False 4764.78 0 4043144 156906 None 9.3.3 Supplying, erecting, testing & commissioning of ON-LINE UPS system suitable for operation on 230V, 50Hz, A/C supply, with isolation transformer all accessories complete and Excluding batteries and wiring complete.5 KVA ON LINE UPS (Page No.38 / Item No.9.3.3 Electrical SR of 2023-24) Each 70434.49 70434.49 2.0 False None None False None False 140868.98 0 4043145 156906 None 9.4.5 Supplying, installation, testing & commissioning of 12Volts .AH batteries in poly propylene container for . Low maintenance batteries, plate type.120 AH capacity.(Page No.38 / Item No.9.4.5 Electrical SR of 2023-24) Each 24030.93 24030.93 10.0 False None None False None False 240309.3 0 4043146 156906 None 5.41.2 Supplying and fixing angle iron frame work fabricated out of M.S. angle iron. and M.S. Flat.with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint.50x50x6mm.(Page No.20 / Item No.5.41.2 Electrical SR of 2023-24) Each 406.85 406.85 28.0 False None None False None False 11391.8 0
generalCriterionList	createdTs version createdDate modifiedDate criterionType description tenderEligibilityCriterionDocumentList 1726854031000 0 None None ELIGIBILITY Tenders from Joint ventures are not acceptable. None 1726854031000 0 None None ELIGIBILITY Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka None 1726854031000 0 None None ELIGIBILITY Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document. None 1726854031000 0 None None ELIGIBILITY It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission. None 1726854031000 0 None None ELIGIBILITY EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection. None 1726857404000 0 None None ELIGIBILITY Bidder shall pay Contract Management Module processing fees of 0.025% of the contact value (Min Rs.500/- & Max Rs.7500/-) soon after contract has been issued to bidder. None 1726857409000 0 None None ELIGIBILITY Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document. None 1726857413000 0 None None ELIGIBILITY The contractor should provide daily there staff members on site None 1726857418000 0 None None ELIGIBILITY If there is any objection regarding tender, eligibility of contractors, documents etc. The objection must be submitted before last date & time of submission of tender directly to Executive Engineer, PRE Dn, Haveri. (Not in inward). None 1726857423000 0 None None ELIGIBILITY All the scanned documents pertaining to bidder to be uploaded shall be in original & same original should be produced to The Executive Engineer (at the time of technical opening) who reserves right to verify the original documents before approval. None 1726857429000 0 None None ELIGIBILITY The work subjected to third party inspection and inspection by other govt agencies third party inspection cost is borne by the contractor at the rate of 0.5% of the gross amount of the bill third party agency is appointed by the dept. None 1726857434000 0 None None ELIGIBILITY Tenderer must have achieved in at least two financial years an average minimum financial Turn over (in all classes of civil construction works only) per financial year (ABSTRACT STATEMENT FROM CA OF 5 YEARS) None 1726857440000 0 None None ELIGIBILITY The original documents should be produced for verification at any stage of tender process as and when sought for, failing which the bidders are liable for disqualification. None 1726857446000 0 None None ELIGIBILITY Aspiring bidders/ contractors who have not obtained the user ID & Password for participating in E-Pproc in PRED,, may now obtain the same from the website www.epro.karnataka.gov.in through link contractors can contact Helpdesk HP-080 25201227 & 080 25501216 None 1726857452000 0 None None ELIGIBILITY Bidders/ Contractors can access tender document on the website, fill them and submit the completed tender document into electronic tender on the website itself with in the stipulated date. The blank tender document can be obtained through our website www.epro.karnataka.gov.in where electronic tender form is provided. Additional conditions and information also can be obtained through the above mentioned site. None 1726857459000 0 None None ELIGIBILITY Contractors whose EMD has been forfeited already or black listed are not permitted to participate for this bid. Any tender submitted by such agencies will be rejected. None 1726857464000 0 None None ELIGIBILITY Incase of Cancellation of Tender, tender application fee will not be refunded or adjusted in any case. None 1726857476000 0 None None ELIGIBILITY Bidders/contractors should attach all the scanned copies of the certificates along with their registration copy with documents pertaining to the prequalification as mentioned above(as per condition No 3 on or before the last date and time mentioned through electronic tender in the website None 1726857482000 0 None None ELIGIBILITY Any arbitrary clause is not applicable to the above works. Conditional tenders are liable for rejection. None 1726857549000 0 None None ELIGIBILITY To qualify for award of the Contract, each bidder should have attained in the last five years i.e. 2019-20 to 2023-24: a) achieved in at least two financial years a minimum financial turnover (Turnover certificate with Profit and loss statements and IT returns) (in all classes of civil engineering construction works only) Rs: 315.98 Lakhs. (Usually not less than Two times the Estimated Annual Payments under this contract) with UDIN No. certified by Authourized charted Accountant. b) Satisfactorily completed as a prime contractor, at least one similar nature of work such as Building work of value not less than Rs.79.00 lakhs in any one year. usually not less than 50 percentage of the estimated value of contract None 1726857558000 0 None None ELIGIBILITY Any taxes shall be paid as per the prevailing orders at that time. None 1726857566000 0 None None ELIGIBILITY Bidder must be executed 80% of quantities in any one year during last 5 years i.e. 2019-20 to 2023-24 provided in BOQ , for the items stated in bid document None 1726857571000 0 None None ELIGIBILITY The contractor should provide daily there staff members on site None 1726857576000 0 None None ELIGIBILITY Participating bidders contractors in the tender should submit the following documents along with Technical Bid in addition to documents details required as per KW-4. None 1726857582000 0 None None ELIGIBILITY Materials to be utiliszed for the work must be tested in PRED labs and quality control test reports must be enclosed to the bills. Cost of quality control tests must be borne by the contractor. None 1726857587000 0 None None ELIGIBILITY After Completion of Work Third Party/SQM/DQM Inspection Reports Submitt with the Bills None 1726857593000 0 None None ELIGIBILITY Successful bidder submitting bids below the amount put to tender will be regularized to submit the difference amount in the form of FDR/TDR/DD/Pledge on the name of EE PRED Haveri within 20 days from the date of receiving the letter of acceptance. additional security paid for unbalanced tenders Failing which EMD will be forfeited and further action will be taken as per G O No FD PCL 2008 Bangalore Dated 14/10/2008 None 1726857598000 0 None None ELIGIBILITY The Eligible Contractor Should Agree the KW-4 Bid Document Conditions. None 1726857604000 0 None None ELIGIBILITY The Work constructed under this programme shall be of very high standard, requiring no major repairs for three (1)years after completion of construction the contractors shall have to give guarantee for 1 years maintenance None 1726857609000 0 None None ELIGIBILITY The item rates are excluding GST but inclusive of all other charges. None 1726857615000 0 None None ELIGIBILITY GST shall be paid to the tendered amount separately None 1726857622000 0 None None ELIGIBILITY Any over writing of civil engineering words and measurements should be clearified the considered department ( No claims shoulbe concidered) None 1726857634000 0 None None ELIGIBILITY The Project Completion period is 11 months and the defect liability period of the work is (1) One year after successful completion of the work. (including Monsoon). None 1726857661000 0 None None ELIGIBILITY Tenderer must have liquid assets and /or availability of credit facilities of not less than Rs.43.09 Lakhs Credit lines/ letter of credit/ certificates from banks for meeting the fund requirement etc. issued the Nationalised bank should be furnished by the contractor And LOC issued by such a bank should be of unconditional nature. (LOC issued by such a banks should be of UNCONDITIONAL) None 1726857676000 0 None None ELIGIBILITY Only Class-3 & above registered contractors are eligible to apply for this tender None
preQualCriterionList	None
technicalCriterionList	createdTs version createdDate modifiedDate description criterionCategoryText criterionTypeOthersValue tenderTechnicalCriterionDocumentList None None None None List of existing commitments and ongoing works None None None None None None List of works for which tenders already submitted None None None None None None Banker Details for reference None None None None None None Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded None None None None None None Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years None None None None None None Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded None None None None None None List of Financial Resources with Certificates None None None None None None Contractor should upload contract registration copy enrolled in PWD (Class 3/above registration copy) Past Experience None createdTs version createdDate modifiedDate documentName None None None None PWD Registration Certificate (Class I/II/III/IV) None None None None PAN & GST Certificate Past Experience None createdTs version createdDate modifiedDate documentName None None None None Others -- PAN & GST Certificate None None None None Postal Address with contact number Past Experience None createdTs version createdDate modifiedDate documentName None None None None Others -- Postal Address with contact number None None None None Satisfactorily completed similar nature of work (at least 50 percentage of the contract value), as prime contractor, at least one similar work such as Building work of value not less than Rs.79.00 lakhs (usually not less than 50 percentage estimated value of contract) (2019-20 to 2023-24) Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None Tenderer must have completed physical work done as perscribed in bid document KW-4 Executed in any year, the following (80 percentage) quantities of work during last 5 years i.e. 2019-20 to 2023-24 provided in BOQ: 1.Earthwork (Eaxcavation/Subgrade/Embankment) Cum 348.71 2.Solid Concrete Blocks/Laterite/BBM/SSM/Similar Masory walls Sqm 196.06 3.RCC/PCC Cum 294.60 4.TMT Steel reinforcement Tonne 21.58 5.Plastering Sqm 2720.00 6.Flooring Sqm 655.22 Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Quantities None None None None To qualify for award of this contract, each tenderer in its name should have in the last five years, i.e. (2019-20 to 2023-24) achieved in at least two financial years an average annual financial turnover is not less than amount put tender (in all classes of civil engineering construction works only) of Rs. Rs:315.98 lakhs (Usually not less than Two times the Estimated Annual Payments under this contract) with UDIN No. certified by Authourized charted Accountant. Financial Status None createdTs version createdDate modifiedDate documentName None None None None Audited CA Certificate of Annual Turnover None None None None Tenderer must have liquid assets and /or availability of credit facilities of not less than Rs. 43.09 Lakhs Credit lines/ letter of credit/ certificates from banks for meeting the fund requirement etc. issued the Nationalised bank should be furnished by the contractor And LOC issued by such a bank should be of unconditional nature. (LOC issued by such a banks should be of UNCONDITIONAL) Financial Status None createdTs version createdDate modifiedDate documentName None None None None Line of Credit None None None None Bid capacity Financial Status None createdTs version createdDate modifiedDate documentName None None None None Others -- Bid capacity
tenderCriterionDocumentList	documentName optional documentTypeText PWD Registration Certificate Class-3 & above True Technical Bid PAN & GST Certificate True Technical Bid Satisfactorily completed similar nature of work, at least 50 percentage of the contract value, as prime contractor, at least one similar work such as Building work of value not less than Rs.79.00 lakhs-usually not less than 50 percentage estimated value of contract. 2019-20 to 2023-24 True Technical Bid Tenderer must have completed physical work done as perscribed in bid document KW-4 Executed in any year, the following-80 percentage-quantities of work during last 5 years i.e. 2019-20 to 2023-24 provided in BOQ 1.Earthwork, Eaxcavation/Subgrade/Embankment Cum 348.71 2.Solid Concrete Blocks/Laterite/BBM/SSM/Similar Masory walls Sqm 196.06 3.RCC/PCC Cum 294.60 4.TMT Steel reinforcement Tonne 21.58 5.Plastering Sqm 2720.00 6.Flooring Sqm 655.22 True Technical Bid To qualify for award of this contract, each tenderer in its name should have in the last five years, i.e. 2019-20 to 2023-24 achieved in at least two financial years an average annual financial turnover is not less than amount put tender, in all classes of civil engineering construction works only of Rs. 315.98 lakhs,Usually not less than Two times the Estimated Annual Payments under this contract, with UDIN No. certified by Authourized charted Accountant. True Technical Bid Tenderer must have liquid assets and /or availability of credit facilities of not less than Rs. 43.09 Lakhs Credit lines/ letter of credit/ certificates from banks for meeting the fund requirement etc. issued the Nationalised bank should be furnished by the contractor And LOC issued by such a bank should be of unconditional nature. LOC issued by such a banks should be of UNCONDITIONAL. True Technical Bid Bid capacity True Technical Bid Postal Address with contact number True Technical Bid
tenderWorkLocationList
tenderAddress	createdTs 1726893346000 version 0 createdDate None modifiedDate None blockNumber EE PRE Division, Old Zilla Panchayath compound, Vidhya Nagar, Haveri street None city Haveri state Karnataka pin 581110
tenderRecallDTO	None