| 1726816667000 | 1 | None | None | Buildings | Construction of aspirational toilet at side of bundar road | 837578.62 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 4036879 | 156603 | None | itm1 | Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of
stumps and other deleterious matter, including dressing of excavated surfaces, disposing off or leveling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m. Filling
available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering and lift upto 1.5 m
including cost of labour, tools, usage& other appurtenances required to complete the work. (Item no. 6 , Page No.1.6) In all kinds of soils. Depth upto 1.50m | Cum | 526.4 | 526.4 | 69.96 | False | None | None | False | None | False | 36826.944 | 0 | | 4036880 | 156603 | None | itm2 | Removal of Unserviceable Soil with Disposal upto a suitable
distance as directed by the Engineer incharge of work | Cum | 71.68 | 71.68 | 69.96 | False | None | None | False | None | False | 5014.7328 | 0 | | 4036881 | 156603 | None | itm3 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steelreinforcement & formwork shall be paid separately) (PWD SR Vol-01, 2023-24, Item no. 2.1, Page No.15) | Cum | 6007.78 | 6007.78 | 2.07 | False | None | None | False | None | False | 12436.1046 | 0 | | 4036882 | 156603 | None | itm4 | Providing Coursed rubble masonry (first sort) with hard stone in foundation and plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) (PWD SR Vol-02, 2023-24, Item no.5.2, Page No.9) | Cum | 5402.88 | 5402.88 | 4.16 | False | None | None | False | None | False | 22475.9808 | 0 | | 4036883 | 156603 | None | itm5 | Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) (PWD SR Vol-02, 2023-24, Item no.5.4, Page No.9) | Cum | 6072.64 | 6072.64 | 7.02 | False | None | None | False | None | False | 42629.9328 | 0 | | 4036884 | 156603 | None | itm6 | Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5 m.
Including cost of all labour complete as per specifications (PWD SR Vol-01, 2023-24, Item no.1.10, Page No.7) | Cum | 136.64 | 136.64 | 19.71 | False | None | None | False | None | False | 2693.1744 | 0 | | 4036885 | 156603 | None | itm7 | Providing Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work ready to use "cut and bend" rebars of approved make from factory/workshop to construction site including placing in position, binding and anchoring to adjacent members whereever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications.(PWD SR Vol-02, 2023-24, Item no.11.33, Page No.84) | Kg | 92.96 | 92.96 | 799.69 | False | None | None | False | None | False | 74339.1824 | 0 | | 4036886 | 156603 | None | itm8 | Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. (PWD Vol-02 SR 2023-24, Item no. 6.7, Page No.13) | Cum | 7564.48 | 7564.48 | 5.98 | False | None | None | False | None | False | 45235.5904 | 0 | | 4036887 | 156603 | None | itm9 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road
works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height.
The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS
Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The
cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS
codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete
the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be
paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (PWD SR, Vol.1, 2023-24, Item no. 2.5.2, Page No.93) | Cum | 11166.24 | 11166.24 | 6.13 | False | None | None | False | None | False | 68449.0512 | 0 | | 4036888 | 156603 | None | itm9a | Roof | Cum | 10517.04 | 10517.04 | 5.76 | False | None | None | False | None | False | 60578.1504 | 0 | | 4036889 | 156603 | None | itm10 | Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (PWD SR Vol-02, 2023-24, Item no. 8.4.1, Page No.41) | Sqm | 315.84 | 315.84 | 30.63 | False | None | None | False | None | False | 9674.1792 | 0 | | 4036890 | 156603 | None | itm11 | Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (PWD SR Vol-02, 2023-24, Item no. 8.10, Page No.43) | Sqm | 197.12 | 197.12 | 38.4 | False | None | None | False | None | False | 7569.408 | 0 | | 4036891 | 156603 | None | itm12 | Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1 cement : 3 coarse sand) finished rough with sponge to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (PWD SR Vol-02, 2023-24, Item no. 8.9, Page No.42) | Sqm | 368.48 | 368.48 | 71.83 | False | None | None | False | None | False | 26467.9184 | 0 | | 4036892 | 156603 | None | itm13 | Providing and laying 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per direction of Engineer incharge. (PWD SR Vol-02, 2023-24, Item no. 9.2, Page No.59) | Sqm | 810.88 | 810.88 | 26.09 | False | None | None | False | None | False | 21155.8592 | 0 | | 4036893 | 156603 | None | itm14 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete. (PWD SR Vol-02, 2023-24, Item no. 9.11, Page No.60) | Sqm | 995.68 | 995.68 | 26.09 | False | None | None | False | None | False | 25977.2912 | 0 | | 4036894 | 156603 | None | itm16 | Providing and fixing 1 mm thick M.S. sheet sliding-shutters, with frame and diagonal braces of 40x40x6 mm angle iron, 3 mm M.S. gusset plates at the junctions and corners, 25 mm dia pulley, 40x40x6 mm angle and T- iron guide at the top and bottom respectively, including applying a priming coat of approved steel primer including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. (PWD SR Vol-02, 2023-24, Item no. 11.4, Page No.77) | Sqm | 4849.6 | 4849.6 | 3.78 | False | None | None | False | None | False | 18331.488 | 0 | | 4036895 | 156603 | None | itm17 | Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications (PWD SR Vol-02, 2022-23, Item no. 12.51, Page No.105) | No | 1663.2 | 1663.2 | 5.0 | False | None | None | False | None | False | 8316.0 | 0 | | 4036896 | 156603 | None | itm18 | Providing & fixing 30mm thick factory made rigid foam Panelled Door Shutters made from M.S. tube of 19 gauge thickness, size 19x19mm for stiles and 15x15mm for top & bottom rails, covered with heat moulded PVC C channel of 5mm thick sheet & 30 x 50mm wide to form stiles & 5mm thick & 75mm wide PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick 20mm wide PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet fitted in the M.S. Frame, Sealed to
the stiles & rails with 5x30mm PVC sheet beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75 mm Aluminium hinges. (PWD SR Vol-02, , Item no. 12.53, Page No.105) | Sqm | 321.44 | 321.44 | 7.88 | False | None | None | False | None | False | 2532.9472 | 0 | | 4036897 | 156603 | None | itm19 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc. (PWD SR Vol-02, , Item no. 11.34B, Page No.86) | Kgs | 160.16 | 160.16 | 93.6 | False | None | None | False | None | False | 14990.976 | 0 | | 4036898 | 156603 | None | itm20 | Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) (PWD SR Vol-02, 2023-24, Item no. 12.85, Page No.109) | Sqm | 5454.4 | 5454.4 | 2.1 | False | None | None | False | None | False | 11454.24 | 0 | | 4036899 | 156603 | None | itm21 | Providing & fixing of 2.5 track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 94mm width x 45mm height with reinforcement of 1mm thickness and Sash with overall size of 39mm x 58mm with GI
reinforcement of 1.5mm and mesh sash of size 25mm x 42mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 5mm plain float glass, standard hardware& single point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 1819mm x 1819mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall
not be made) (PWD SR Vol-02, 2023-24, Item no. 12.89, Page No.110) | Sqm | 7528.64 | 7528.64 | 1.8 | False | None | None | False | None | False | 13551.552 | 0 | | 4036900 | 156603 | None | itm22 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. (PWD SR Vol-02, 2023-24, Item no. 11.28, Page No.85) | Kg | 560.0 | 560.0 | 66.0 | False | None | None | False | None | False | 36960.0 | 0 | | 4036901 | 156603 | None | itm23 | Providing White washing with lime to give an even shade :New work (three coats) with lime of approved quality, including cost of materials, labour complete as per specifications and as per directions of Engineer-in- charge. (PWD SR Vol-02, 2023-24, Item no. 8.21, Page No.44) | Sqm | 21.28 | 21.28 | 32.73 | False | None | None | False | None | False | 696.4944 | 0 | | 4036902 | 156603 | None | itm24 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 L/10 m² over and including one coat of Special primer applied @ 0.75 L/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (The gloss should be 50% @ 60 degree
angle with 10 years life) (PWD SR Vol-02, 2023-24, Item no. 8.33.1, Page No.46) | Sqm | 132.16 | 132.16 | 132.16 | False | None | None | False | None | False | 17466.2656 | 0 | | 4036903 | 156603 | None | itm25 | Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 L/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (PWD SR Vol-02, 2023-24, Item no. 8.29, Page No.45) | Sqm | 232.96 | 232.96 | 83.2 | False | None | None | False | None | False | 19382.272 | 0 | | 4036904 | 156603 | None | itm26 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid. (PWD SR Vol-02, 2023-24, Item no. 14.3.1, Page No.131) | Each | 5605.6 | 5605.6 | 4.0 | False | None | None | False | None | False | 22422.4 | 0 | | 4036905 | 156603 | None | itm27 | Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required :Single half stall urinal with 5 litre P.V.C. automatic flushing cistern. (PWD SR Vol-02, 2023-24, Item no. 14.5.1, Page No.124) | Each | 7423.36 | 7423.36 | 2.0 | False | None | None | False | None | False | 14846.72 | 0 | | 4036906 | 156603 | None | itm28 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required: using White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap. (PWD SR Vol-02, 2023-24, Item no. 14.7B, Page No.125) | Each | 1932.0 | 1932.0 | 4.0 | False | None | None | False | None | False | 7728.0 | 0 | | 4036907 | 156603 | None | itm29 | Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testingand commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for:PVC pipes 32mm dia., 10 kg/sqcm & class 5. (PWD SR Vol-05, 2021-22, Sl no. 1.2, M010B, Page No.134) | m | 71.68 | 71.68 | 60.0 | False | None | None | False | None | False | 4300.8 | 0 | | 4036908 | 156603 | None | itm30 | Supplying UNPLASTICISED PVC pipes conforming to IS 16098:2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading and unloading at both destinations and cuts of pipes wherever necessary including jointing of UPVC pipes (with cost of elastomeric sealing rings) and specials (excluding cost of specials) with jointing of approved type, with all labour, lead & lifts, including encasing the pipes alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (contractor will make his own arrangements for procuring water for testing) etc. for: Pipes of SN4, 160mm dia. (PWD SR Vol-05, 2021-22, Sl no. 2.4, M020D, Page No.134) | m | 622.72 | 622.72 | 75.0 | False | None | None | False | None | False | 46704.0 | 0 | | 4036909 | 156603 | None | itm31 | Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and rolling and lowering into trenches, laying true to line and jointing of pipes and specials with electrofusion welding, giving hydraulic test as per relevant ISS with all lead and lifts including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excation, testing and commissioning. The rate is exclusive of required specials and fittings wherever necessary like saddle Tee, stub ends, flanged sets, bedns, reducers etc. complete (Contractor will make his own arrangements for procuring water for testing) etc. Note: Upto 110mm dia Coil shall be used. For Grade PE80 PN6.0 :HDPE Grade PE80-PN6.0, 90mm dia. (PWD SR Vol-05, 2021-22, Sl no. 1.3, K010C, Page No.121) | m | 266.56 | 266.56 | 10.0 | False | None | None | False | None | False | 2665.6 | 0 | | 4036910 | 156603 | None | itm32 | Supply and delivery at site special moulded variety PVC couplers as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark and with its latest amendments.32mm dia PVC couplers, (PWD SR Vol-05, 2021-22, Sl no. 6.2, M090B, Page No.136) | Each | 19.04 | 19.04 | 40.0 | False | None | None | False | None | False | 761.6 | 0 | | 4036911 | 156603 | None | itm33 | Supply and delivery at site special moulded variety PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments.32 mm dia PVC Elbows. (PWD SR Vol-05, 2021-22, Sl no. 7.2, M100B, Page No.137) | Each | 24.64 | 24.64 | 30.0 | False | None | None | False | None | False | 739.2 | 0 | | 4036912 | 156603 | None | itm34 | Supply and delivery at site special moulded variety PVC bend as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments.32 mm dia PVC BEND. (PWD SR Vol-05, 2021-22, Sl no. 9.2, M120B, Page No.138) | Each | 42.56 | 42.56 | 15.0 | False | None | None | False | None | False | 638.4 | 0 | | 4036913 | 156603 | None | itm35 | Providing and fixing rectangular high density polyethylene water storage loft tank with cover, conforming to ISI : 12701, colour of opaque white or as approved by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes. The base support i/c fittings & fixtures for tank shall be paid separately.(For 1000 litre capacity) (PWD SR Vol-02, 2023-24, Sl no. 13.34A, Page No.123) | l | 9.0 | 9.0 | 500.0 | False | None | None | False | None | False | 4500.0 | 0 | | 4036914 | 156603 | None | itm36 | Providing and fixing Ball valve gate with C.I. wheel of approved quality (screwed end) :32 mm nominal bore. (PWD SR Vol-02, 2023-24, ltem no.13.4.2, Page No.117) | No | 275.0 | 275.0 | 4.0 | False | None | None | False | None | False | 1100.0 | 0 | | 4036915 | 156603 | None | itm37 | Providing and fixing brass stop cock of approved quality : 20 mm nominal bore. (PWD SR Vol-02, 2023-24, ltem no.13.3.2, Page No.115) | No | 386.4 | 386.4 | 6.0 | False | None | None | False | None | False | 2318.4 | 0 | | 4036916 | 156603 | None | itm38 | Providing and fixing brass bib cock of approved quality.20 mm nominal bore. (PWD SR Vol-02, 2023-24, ltem no.13.2.2, Page No.117) | No | 386.4 | 386.4 | 6.0 | False | None | None | False | None | False | 2318.4 | 0 | | 4036917 | 156603 | None | itm39 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :Rectangular shape 1500x450 mm. (PWD SR Vol-02, 2023-24, ltem no.14.32.3, Page No.136) | No | 972.16 | 972.16 | 2.0 | False | None | None | False | None | False | 1944.32 | 0 | | 4036918 | 156603 | None | itm40 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g. (PWD SR Vol-02, 2023-24, ltem no.14.40.1, Page No.137) | No | 389.72 | 389.72 | 4.0 | False | None | None | False | None | False | 1558.88 | 0 | | 4036919 | 156603 | None | itm41 | Supplying heavy gauge PVC conduit pipe . mm dia.mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary, 19/20 mm dia 2 mm thick, (PWD Electrical CSR 2023-24, IN-1.2.1, PN-2) | Mtr | 66.0 | 66.0 | 18.0 | False | None | None | False | None | False | 1188.0 | 0 | | 4036920 | 156603 | None | itm42 | Supplying heavy gauge PVC Conduit Pipe . dia . mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering upto the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary. 19 20 mm dia 2 mm thick (PWD Electrical CSR 2023-24 IN-1.3.1, PN-2) | Mtr | 68.0 | 68.0 | 20.0 | False | None | None | False | None | False | 1360.0 | 0 | | 4036921 | 156603 | None | itm43 | Supplying heavy gauge PVC Conduit Pipe . dia . mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering upto the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary. 25 mm dia 2 mm thick (PWD Electrical CSR 2023-24, IN-1.3.2, PN-2) | Mtr | 79.0 | 79.0 | 15.0 | False | None | None | False | None | False | 1185.0 | 0 | | 4036922 | 156603 | None | itm44 | Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. PWD Electrical SR 2021-22, Short point upto 3m from tapping point to out let via switch box. (PWD Electrical CSR 2021-2022, IN-2.2.1, PN-5), Short point upto 3m from tapping point to out let via switch box. | Mtr | 269.0 | 269.0 | 2.0 | False | None | None | False | None | False | 538.0 | 0 | | 4036923 | 156603 | None | item45 | Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. PWD Electrical SR 2021-22, Short point upto 3m from tapping point to out let via switch box. (PWD Electrical CSR 2023-24, IN-2.2.2, PN-5), Medium point above 3m upto 6m from tapping point to out let via switch box. | Point | 379.0 | 379.0 | 4.0 | False | None | None | False | None | False | 1516.0 | 0 | | 4036924 | 156603 | None | itm46 | Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. PWD Electrical SR 2021-22, Short point upto 3m from tapping point to out let via switch box. (PWD Electrical CSR 2023-24, IN-2.2.2, PN-5), Long point above 6m upto 10m from tapping point to out let via switch box | Point | 379.0 | 379.0 | 10.0 | False | None | None | False | None | False | 3790.0 | 0 | | 4036925 | 156603 | None | itm47 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS- 694 confirming to latest amendments.PWD Electrical CSR 2023-24, IN-2.3.2, PN-5), 1.5 mm2 | Mtr | 26.0 | 26.0 | 18.0 | False | None | None | False | None | False | 468.0 | 0 | | 4036926 | 156603 | None | itm49 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS- 694 confirming to latest amendments. (PWD Electrical CSR 2023-24, IN-2.3.4, PN-5), 4 mm2 | Mtr | 63.0 | 63.0 | 20.0 | False | None | None | False | None | False | 1260.0 | 0 | | 4036927 | 156603 | None | itm50 | Supplying 6A flush type socket and 6 A flush type SP switch either surface/flush mounting in existing gang box or in 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring using necessary capacity wires as required as per IS 1293 and IS 3654, (PWD Electrical CSR 2023-24, IN-3.1.2, PN-8), 6A 3/5 Way | Each | 147.0 | 147.0 | 4.0 | False | None | None | False | None | False | 588.0 | 0 | | 4036928 | 156603 | None | itm51 | Supplying and flush mounting powder coated galvanized metal box suitable for mounting modular switch plates The box should be firmly flush mounted after due groove cutting in BrickStone C wall PWD electrical CSR 2023 24IN343 PN86 Way | Each | 177.0 | 177.0 | 2.0 | False | None | None | False | None | False | 354.0 | 0 | | 4036929 | 156603 | None | itm52 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box, (PWD Electrical CSR 2023-24, IN-3.5.3, PN-8), 6 Module | Each | 175.0 | 175.0 | 2.0 | False | None | None | False | None | False | 350.0 | 0 | | 4036930 | 156603 | None | itm53 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box, (PWD Electrical CSR 2023-24, IN-3.5.7, PN-8), 16 Module | Each | 397.0 | 397.0 | 2.0 | False | None | None | False | None | False | 794.0 | 0 | | 4036931 | 156603 | None | itm54 | Supplying and Fixing.mm dia class A GI pipe bracket upto 2.7 meters long terminated with a reducing collar of 40x25mm to which extra pipe of 175mm length is fixed for fixing MV/SV/MH/FTL street light fitting of all capacities on rail/RCC/wall/ tubular pole, using suitable clA, bolts, nuts and wiring using suitable capacity wires.(PWD Electrical CSR 2023-24, IN-13.2.1, PN-56), Using 25mm dia G.I.Pipe | Each | 1203.0 | 1203.0 | 2.0 | False | None | None | False | None | False | 2406.0 | 0 | | 4036932 | 156603 | None | itm55 | Fixing halogenmetal halide SVLILLED floodlight fitting over existing polewall ceiling including clA, bolts, nuts and wiring using suitable capacity wires. PWD Electrical CSR 202324 IN13.5PN56 | Each | 162.0 | 162.0 | 2.0 | False | None | None | False | None | False | 324.0 | 0 | | 4036933 | 156603 | None | itm56 | Supplying of feet PVC Batten with integrated LED tube W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V@ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. LED light fitting 1 x 2 9/10 W (PWD Electrical CSR 2023-24, IN-11.3.1, PN-43) | Each | 551.0 | 551.0 | 4.0 | False | None | None | False | None | False | 2204.0 | 0 | | 4036934 | 156603 | None | itm57 | Supplying of feet PVC Batten with integrated LED tube .W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220 240V@ 50/60Hz &Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition.LED light fitting 1 x 4'2022 W (PWD Electrical CSR 202324 IN11.3.2 PN 43 | Each | 690.0 | 690.0 | 4.0 | False | None | None | False | None | False | 2760.0 | 0 | | 4036935 | 156603 | None | itm58 | Supplying fixing of retrofit type LED bulb . W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K CRI 70 efficacy 80 lumen per W, life 25000 burning hours and Compliance to IS 10322IEC 60598, LM 79 LM 80. The LED are driven by HF electronic driver integrated in the system, with PF 0.95, power loss should 5% of lamp Wage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20, Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition PWD Electrical CSR 2023 24, IN11.11.5 PN 38Part112W 6500K | Each | 269.0 | 269.0 | 4.0 | False | None | None | False | None | False | 1076.0 | 0 | | 4036936 | 156603 | None | itm3559 | Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling /rafters / girders using 23/0.0076" twin twisted PVC insulated wires, required Nos of round blocks and clA. On wall/ ceiling / Rafter / Girders. (PWD Electrical CSR 2023-2024, IN-13.7.1, PN-56) | Each | 122.0 | 122.0 | 4.0 | False | None | None | False | None | False | 488.0 | 0 | | 4036937 | 156603 | None | itm60 | Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board. (PWD Electrical CSR 2023-24, IN-3.14.6, PN-10), 6A Lamp Holder | No | 71.0 | 71.0 | 4.0 | False | None | None | False | None | False | 284.0 | 0 | | 4036938 | 156603 | None | itm61 | Supplying exhaust fan of 1440 RPM of 300 mm (12") size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply. (PWD Electrical CSR 2023-24, IN-6.1, PN-30). | Each | 1492.0 | 1492.0 | 4.0 | False | None | None | False | None | False | 5968.0 | 0 | | 4036939 | 156603 | None | itm62 | Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. (PWD Electrical CSR 2023-24, IN-5.18.4, PN-17).6-32 A DP | Each | 739.0 | 739.0 | 4.0 | False | None | None | False | None | False | 2956.0 | 0 | | 4036940 | 156603 | None | item63 | Fabricating supplying and mounting MS box made out .SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clA with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour etc., complete. (PWD Electrical CSR 2023-24, IN-5.42.2, PN-20).16SWG. | Sq CM | 0.43 | 0.43 | 8000.0 | False | None | None | False | None | False | 3440.0 | 0 | | 4036941 | 156603 | None | itm64 | Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 20A single phase Class-1 Accuracy with Temper Proof Energy Meter (PWD Electrical CSR 2023-24, IN-5.30, PN-19) | Each | 1380.0 | 1380.0 | 1.0 | False | None | None | False | None | False | 1380.0 | 0 | | 4036942 | 156603 | None | itm65 | Digging of Pit for providing GI Pipe type Earthing, Hard Soil, (Bescom CSR 2023-24, IN-1.6.2, PN-43) | Per Pit | 2990.0 | 2990.0 | 1.0 | False | None | None | False | None | False | 2990.0 | 0 | | 4036943 | 156603 | None | itm66 | GI Grounding pipe, B - Class, 42 mm dia, 2.5 Mtr long, 3.2 mm thick with bolt, nut, GI Strips and washer complete Minimum Weight of GI Pipe: 7.3 Kg, (Bescom CSR 2021-22, IN-54.01, PN-17(Part-III)) | No | 743.0 | 743.0 | 1.0 | False | None | None | False | None | False | 743.0 | 0 | | 4036944 | 156603 | None | itm67 | Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff LT Cable, (Bescom CSR 2023-24, IN-21.05, PN-52), 2.5 to 25 Sqmm | Km | 20886.0 | 20886.0 | 0.06 | False | None | None | False | None | False | 1253.16 | 0 | | 4036945 | 156603 | None | itm68 | Aluminium End Terminal (Lug), 25 Sqmm (Bescom CSR 2023-24, IN-60.03, PN-27) | Each | 3.0 | 3.0 | 8.0 | False | None | None | False | None | False | 24.0 | 0 | | 4036946 | 156603 | None | itm69 | GI Pipe B - Class as per IS-1239, (Bescom CSR 2023-24, IN-49.04, PN-16(Part-III)), GI Pipe - 40 mm Dia | Mtr | 295.0 | 295.0 | 4.0 | False | None | None | False | None | False | 1180.0 | 0 | | 4036947 | 156603 | None | itm70 | Epoxy Terminating Kit (Pothead) suitable for 1.1 kV, LTUG Cable, (Bescom CSR 2021-22, IN-35.01, PN-15), Up to 4C x 50 Sqmm | Set | 324.0 | 324.0 | 1.0 | False | None | None | False | None | False | 324.0 | 0 | | 4036948 | 156603 | None | itm71 | Supply, delivery, erection and commissioning at site lighting distribution board suitable for monoblock centrifugal pump confirming with ISI mark and its latest amendments. (PWD SR Vol-05, 2021-22, Sl No.50, CODE:P480A, Page No.165) | Set | 4635.0 | 4635.0 | 1.0 | False | None | None | False | None | False | 4635.0 | 0 | | 4036949 | 156603 | None | itm72 | Supplying and installation of HAND DRYER (Market Rate) | Each | 15000.0 | 15000.0 | 2.0 | False | None | None | False | None | False | 30000.0 | 0 | | 4036950 | 156603 | None | itm73 | Supplying and installation of SANITORY PAD INCINERATOR (Market Rate) | Each | 20000.0 | 20000.0 | 1.0 | False | None | None | False | None | False | 20000.0 | 0 | | 4036951 | 156603 | None | itm74 | Supplying and installation of SANITORY VENDING MACHINE (Market Rate)
| Each | 20000.0 | 20000.0 | 1.0 | False | None | None | False | None | False | 20000.0 | 0 | | 4036952 | 156603 | None | deduct1 | Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. (PWD SR Vol-02, 2023-24, Item no. 9.39, Page No.65) | Sqm | 2137.25 | 2137.25 | 11.66 | False | None | None | True | 2137.0 | False | 24920.335 | 0 |
|