| 4076470 | 158639 | None | Code 01 | Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, including removal and disposal of top organic soil not exceeding 150 mm in thickness.(ii) By Mechanical Means using DozerB In area of thorny jungle | Sqm | 508.2 | 508.2 | 0.26 | False | None | None | False | None | False | 132.132 | 0 |
| 4076471 | 158639 | None | Code 02 | Earth work in surface excavation for stripping, seating of bund, Road way, by manual means for lowering & leveling the ground for all works other than foundation & depth in all kinds of soil not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, trutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage & other appurtenances required to complete the work. | Cum | 95.55 | 95.55 | 4.32 | False | None | None | False | None | False | 412.776 | 0 |
| 4076472 | 158639 | None | Code 03 | Earth work excavation by manual means for drains,canals, waste weir draft, approach channels, key trench, foundation of Bridges and such similar works, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, excavated surface leveled and sides neatly dressed disposing off or leveling the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage & other appurtenances required to complete the work.Depth exceeding 1.5m, but not exceeding 3 m | Cum | 467.25 | 467.25 | 25.38 | False | None | None | False | None | False | 11858.805 | 0 |
| 4076473 | 158639 | None | Code 04 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates | Cum | 6288.45 | 6288.45 | 3.021 | False | None | None | False | None | False | 18997.40745 | 0 |
| 4076474 | 158639 | None | Code 05 | Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates | Cum | 7170.28 | 7170.28 | 3.74 | False | None | None | False | None | False | 26816.8472 | 0 |
| 4076475 | 158639 | None | Code 06 | Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) 2.3.2 M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates | Cum | 11566.8 | 11566.8 | 0.76 | False | None | None | False | None | False | 8790.768 | 0 |
| 4076476 | 158639 | None | Code 07 | Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) 2.3.2 M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates | Cum | 10206.0 | 10206.0 | 0.79 | False | None | None | False | None | False | 8062.74 | 0 |
| 4076477 | 158639 | None | Code 08 | Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) | Cum | 6708.45 | 6708.45 | 4.73 | False | None | None | False | None | False | 31730.9685 | 0 |
| 4076478 | 158639 | None | Code 09 | Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cost of materials, labour, curing as per specifications and as per directions of Engineer-in-charge. | Sqm | 267.75 | 267.75 | 7.92 | False | None | None | False | None | False | 2120.58 | 0 |
| 4076479 | 158639 | None | Code 10 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. | Cum | 279.3 | 279.3 | 20.97 | False | None | None | False | None | False | 5856.921 | 0 |
| 4076480 | 158639 | None | Code 11 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS
2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. | Sqm | 1375.5 | 1375.5 | 22.14 | False | None | None | False | None | False | 30453.57 | 0 |
| 4076481 | 158639 | None | Code 12 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having lock density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. | Sqm | 1159.2 | 1159.2 | 9.48 | False | None | None | False | None | False | 10989.216 | 0 |
| 4076482 | 158639 | None | Code 13 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates | Cum | 6288.45 | 6288.45 | 0.05 | False | None | None | False | None | False | 314.4225 | 0 |
| 4076483 | 158639 | None | Code 14 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super lasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) 2.5.1 M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates | Cum | 11138.4 | 11138.4 | 0.98 | False | None | None | False | None | False | 10915.632 | 0 |
| 4076484 | 158639 | None | Code 15 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super lasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) 2.5.1 M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates | Cum | 10442.25 | 10442.25 | 1.53 | False | None | None | False | None | False | 15976.6425 | 0 |
| 4076485 | 158639 | None | Code 16 | Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge | Sqm | 253.05 | 253.05 | 12.24 | False | None | None | False | None | False | 3097.332 | 0 |
| 4076486 | 158639 | None | Code 17 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) 2.5.1 M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates | Cum | 10442.25 | 10442.25 | 0.86 | False | None | None | False | None | False | 8980.335 | 0 |
| 4076487 | 158639 | None | Code 18 | Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6kg per m2 to achieve final DFT (dry film thickness) of 1mm including prime coat of epoxy primer @150 g per m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per pecification & with a 10 years warranty on product & work from certified manufacturers as per the direction of the Engineer In charge. | Sqm | 857.85 | 857.85 | 10.8 | False | None | None | False | None | False | 9264.78 | 0 |
| 4076488 | 158639 | None | Code 19 | Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. | Cum | 94912.65 | 94912.65 | 0.4 | False | None | None | False | None | False | 37965.06 | 0 |
| 4076489 | 158639 | None | Code 20 | Providing and fixing in position fully panelled Honne wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. ( excluding cost of fixtures ) | Sqm | 7816.2 | 7816.2 | 4.41 | False | None | None | False | None | False | 34469.442 | 0 |
| 4076490 | 158639 | None | Code 21 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings / wooden frames with rawl plugs screws etc. | Kg / Sqm | 192.15 | 192.15 | 28.35 | False | None | None | False | None | False | 5447.4525 | 0 |
| 4076491 | 158639 | None | Code 22 | Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement ortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever equired smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 389.55 | 389.55 | 24.93 | False | None | None | False | None | False | 9711.4815 | 0 |
| 4076492 | 158639 | None | Code 23 | Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, uring complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 253.05 | 253.05 | 40.08 | False | None | None | False | None | False | 10142.244 | 0 |
| 4076493 | 158639 | None | Code 24 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600x600 mm | Sqm | 1233.75 | 1233.75 | 8.32 | False | None | None | False | None | False | 10264.8 | 0 |
| 4076494 | 158639 | None | Code 25 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement ortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per m2, including pointing in white cement mixed with pigment of matching shade complete. | Sqm | 1161.3 | 1161.3 | 32.88 | False | None | None | False | None | False | 38183.544 | 0 |
| 4076495 | 158639 | None | Code 26 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per pecifications and as per directions of Engineer in charge. | Sqm | 105.0 | 105.0 | 37.17 | False | None | None | False | None | False | 3902.85 | 0 |
| 4076496 | 158639 | None | Code 27 | Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per pecifications and as per directions of Engineer-in-charge. | Sqm | 133.35 | 133.35 | 24.93 | False | None | None | False | None | False | 3324.4155 | 0 |
| 4076497 | 158639 | None | Code 28 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two coats applied @ 1.43 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to move all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 186.9 | 186.9 | 24.93 | False | None | None | False | None | False | 4659.417 | 0 |
| 4076498 | 158639 | None | Code 29 | Providing White washing with lime to give an even shade :New work (three coats) with lime of approved quality, including cost of materials, labour complete as per specifications and as per directions of Engineerin charge | Sqm | 27.3 | 27.3 | 24.93 | False | None | None | False | None | False | 680.589 | 0 |
| 4076499 | 158639 | None | Code 30 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter ncluding preparing the surface even and sand paper smooth, cost of materials, labour complete as per pecifications and as per directions of Engineer-in-charge. | Sqm | 120.75 | 120.75 | 2.7 | False | None | None | False | None | False | 326.025 | 0 |
| 4076500 | 158639 | None | Code 31 | Supplying, Fitting and Placing TMT Fe 500 & above Reinforcement in Foundation / Substructure Superstructure complete as per Drawing and Technical Specifications. | Tonne | 90754.65 | 90754.65 | 0.78 | False | None | None | False | None | False | 70788.627 | 0 |
| 4076501 | 158639 | None | Code 32 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other ppurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) 2.1.4 Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse
aggregates | Cum | 6527.85 | 6527.85 | 1.2 | False | None | None | False | None | False | 7833.42 | 0 |
| 4076502 | 158639 | None | Code 33 | Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. G.I. pipes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the ngineerin- Charge.) | Kg | 154.35 | 154.35 | 211.68 | False | None | None | False | None | False | 32672.808 | 0 |
| 4076503 | 158639 | None | Code 34 | Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long brackets of 15x15mm M.S Square tube, the entire door frame to be reinforced with 19x19mm M.S Square tube of 19 gauge. The door frame to be fixed to the wall using M.S. Screws of 65/80mm size complete as per manufacturers specification & direction of Engineer-in-charge | Sqm | 333.9 | 333.9 | 10.71 | False | None | None | False | None | False | 3576.069 | 0 |
| 4076504 | 158639 | None | Code 35 | Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Prelaminated PVC C Channel of 5mm thick sheet & 30x50mm wide to form stiles & 5mm thick & 75mm wide Prelaminated PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet Prelaminated on either side fitted in the M.S. frame, Sealed to the stiles & rails with PVC Designer beading on either side & joined together with solvent cement adhesive etc., Complete as per anufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75mm Aluminium hinges.12.55.2 -do- with one side prelam | Cum | 2142.0 | 2142.0 | 10.71 | False | None | None | False | None | False | 22940.82 | 0 |
| 4076505 | 158639 | None | Code 36 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 100 mm diameter | Mtr | 265.65 | 265.65 | 30.0 | False | None | None | False | None | False | 7969.5 | 0 |
| 4076506 | 158639 | None | Code 37 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, if c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20 mm nominal dia pipes | Mtr | 500.85 | 500.85 | 20.0 | False | None | None | False | None | False | 10017.0 | 0 |
| 4076507 | 158639 | None | Code 38 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, if c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 32 mm nominal dia pipes | Mtr | 583.8 | 583.8 | 20.0 | False | None | None | False | None | False | 11676.0 | 0 |
| 4076508 | 158639 | None | Code 39 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required 14.2.1 W.C. pan with ISI marked white solid plastic seat and lid | Each | 5079.9 | 5079.9 | 3.0 | False | None | None | False | None | False | 15239.7 | 0 |
| 4076509 | 158639 | None | Code 40 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: 14.7.1 White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps | Each | 3236.1 | 3236.1 | 2.0 | False | None | None | False | None | False | 6472.2 | 0 |
| 4076510 | 158639 | None | Code 41 | Providing and fixing brass stop cock of approved quality : 13.3.2 20 mm nominal bore | Each | 320.25 | 320.25 | 4.0 | False | None | None | False | None | False | 1281.0 | 0 |
| 4076511 | 158639 | None | Code 42 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 13.5.3 25 mm nominal bore | Each | 348.6 | 348.6 | 2.0 | False | None | None | False | None | False | 697.2 | 0 |
| 4076512 | 158639 | None | Code 43 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS: 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base suooort for tank. | Ltr | 9.45 | 9.45 | 1000.0 | False | None | None | False | None | False | 9450.0 | 0 |
| 4076513 | 158639 | None | Code 44 | Providing and fixing unplasticised PVC connection pipe with brass unions : 45 cm length
13.8.2.1 15 mm nominal bore | No | 95.55 | 95.55 | 2.0 | False | None | None | False | None | False | 191.1 | 0 |
| 4076514 | 158639 | None | Code 45 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. | No | 1281.0 | 1281.0 | 2.0 | False | None | None | False | None | False | 2562.0 | 0 |
| 4076515 | 158639 | None | Code 46 | Providing and fixing 100 mm sand cast Iron grating for gully trap. | Each | 49.35 | 49.35 | 2.0 | False | None | None | False | None | False | 98.7 | 0 |
| 4076516 | 158639 | None | Code 47 | Earth work excavation by manual means for drains,canals, waste weir draft, approach channels, key trench, foundation of Bridges and such similar works, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, excavated surface leveled and sides neatly dressed disposing off or leveling the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage & other appurtenances required to complete the work In ordinary/soft rock without blasting upto 1.5 m depth Page No.6 Item No. 1.5.1 KPWD. Volumn -1 DSR2023-24 | Cum | 313.95 | 313.95 | 217.22 | False | None | None | False | None | False | 68196.219 | 0 |
| 4076517 | 158639 | None | Code 48 | Providing Brick work with common burnt clay machine moulded perforated bricks of class designation 3.5 in superstructure above plinth level in cement mortar 1:6 (1 cement : 6 coarse sand) With Non modular bricks including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. | Cum | 8367.45 | 8367.45 | 1.24 | False | None | None | False | None | False | 10375.638 | 0 |
| 4076518 | 158639 | None | Code 49 | Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1 cement : 3 coarse sand) finished rough with sponge to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 404.25 | 404.25 | 18.96 | False | None | None | False | None | False | 7664.58 | 0 |
| 4076519 | 158639 | None | Code 50 | Providing and laying 100mm thick pre-cast cover slabs over drains & Rain pit of width not exceeding 800 mm using M20 concrete reinforced with Micro Alloyed High carbon steel with 3mm - 3ply wired steel @ 2.00 kg/m2, slabs jointed in CM 1:3 proportion and nicely finished Including providing holes in the Cover slabs wherever necessary for easy drainage of surface water including of labour, materials, scaffolding, usage of machinery, curing, lead and lift charges etc, Complete. itm.no 17.12 Page No.152 KPWD. Volumn -2 DSR2023-24 | Sqm | 974.4 | 974.4 | 2.07 | False | None | None | False | None | False | 2017.008 | 0 |
| 4076520 | 158639 | None | Code 51 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe32 mm dia ( item no 14.28.2.1 ) page no 123 PWP. DSR2023-24 | Each | 96.6 | 96.6 | 2.0 | False | None | None | False | None | False | 193.2 | 0 |
| 4076521 | 158639 | None | Code 52 | Geophysical investigation at site for sinking borewells for Providing drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical sounding by adopting Venner or Schlumbergers's method, including reconnaissance survey of geological formation. Geophysical investigation of existing ground water in the vicinity, its quality, quantity and acceptability of the users, indicating the location of the site, recommended depth of casing pipe required to seal the top unconsolidated formation including an extra depth of 1.0 metre in consolidated formation for proper seating of casing pipe, depth of drilling required to cover full depth of aquifer proposed to be tapped, probable yield and other information required including transportation of instruments and accessories to work site, engaging technical personal and labour required etc. NOTE: 1) Additional rate on item 1&2 is allowed for drilling in over burden and fixing Casing pipes beyond 20 M (for fixing Casing pipes only) a) Above 20 M and upto 30 M - 15%, b) Above 30 M - 30% (Measurement of overburden is restricted to the depth of casing pipe fixed excluding initial depth of 20M and projection above ground level). 2) A sum of Rs. 100/- is to be deducted for Dry Borewell towards yield test. etc. complete
(KPWD SR VOL V for the year 2023-24. I. No. 12.4 P.No. 140 ) | Each | 5552.4 | 5552.4 | 1.0 | False | None | None | False | None | False | 5552.4 | 0 |
| 4076522 | 158639 | None | Code 53 | Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete ) (Above 450m of drilling add 10% for every 50m depth) Borewell depth of 0 to 50 Mtrs
(KPWD SR VOL V for the year 2023-24. I. No. 12.1.1 P.No. 132 ) | Rmtr | 388.5 | 388.5 | 50.0 | False | None | None | False | None | False | 19425.0 | 0 |
| 4076523 | 158639 | None | Code 54 | Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete ) (Above 450m of drilling add 10% for every 50m depth) Borewell depth of 50 to 100 Mtrs
(KPWD SR VOL V for the year 2023-24. I. No. 12.1.2 P.No. 132 ) | Rmtr | 487.2 | 487.2 | 50.0 | False | None | None | False | None | False | 24360.0 | 0 |
| 4076524 | 158639 | None | Code 55 | Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete ) (Above 450m of drilling add 10% for every 50m depth) Borewell depth of 100 to 150 Mtrs
(KPWD SR VOL V for the year 2023-24. I. No. 12.1.3 P.No. 132 ) | Rmtr | 517.65 | 517.65 | 10.0 | False | None | None | False | None | False | 5176.5 | 0 |
| 4076525 | 158639 | None | Code 56 | PVC pipes of 6 Kg/cm2 for 160mm
(KPWD SR VOL V for the year 2023-24. Sl No. 649 P.No. A44 ) | Rmtr | 441.0 | 441.0 | 6.0 | False | None | None | False | None | False | 2646.0 | 0 |
| 4076526 | 158639 | None | Code 57 | PVC pipes of 6 Kg/cm2 for 110mm
(KPWD SR VOL V for the year 2023-24. Sl No. 647 P.No. A44 ) | Rmtr | 267.75 | 267.75 | 110.0 | False | None | None | False | None | False | 29452.5 | 0 |
| 4076527 | 158639 | None | Code 58 | Providing and laying at site of work MS casing caps as per IS 1239 (part-II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum). The dimensions of caps and colars shall be strictly as per IS 1239 (Part-II) 1982 with all Amendments including cost of material and labour charges for fixing, if any etc. complete with all lead and lifts and as directed by the Engineer in Charge ( (PWD UGD and water supply SR 2023-24 Volume - V Item no.12.34 page no.143) | Rmtr | 172.2 | 172.2 | 1.0 | False | None | None | False | None | False | 172.2 | 0 |
| 4076528 | 158639 | None | Code 59 | Providing, Single Phase Submersible Pump Sets of 100mm dia (4 inch) suitable for bore well confirming to IS 8034-2000 specifications, to work site with testing of as per instructions of engineer incharge of work and latest ammendments 1.50 HP/1.1KW 20 STG (PWD UGD and water supply SR 2023-24 Volume - V Item no.13.7.7 page no.150) | Each | 19128.9 | 19128.9 | 1.0 | False | None | None | False | None | False | 19128.9 | 0 |
| 4076529 | 158639 | None | Code 60 | Supply and delivery at site Stringing of heavy duty Naylone/PP rope with ISI etc complete suitable for Single phase Pumpsets. (PWD UGD and water supply SR 2023-24 Volume - V Item no.13.31 page no.155) | Mtr | 42.0 | 42.0 | 110.0 | False | None | None | False | None | False | 4620.0 | 0 |
| 4076530 | 158639 | None | Code 61 | Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well caps, cable clips and water tight gland cable protectors, bolts, nuts, valve and gauges,tools and equipments etc., involved in the job as per specifications, with necessary tests as per specifications, with testing of as per instructions of engineer incharge of work. (PWD UGD and water supply SR 2023-24 Volume - V Item no.13.32 page no.156) | Job | 6825.0 | 6825.0 | 1.0 | False | None | None | False | None | False | 6825.0 | 0 |
| 4076531 | 158639 | None | Code 62 | Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendments. 1x3x6 Sqm. (PWD UGD and water supply SR 2023-24 Volume - V Item no.13.22.4 page no.154 | Mtr | 194.25 | 194.25 | 115.0 | False | None | None | False | None | False | 22338.75 | 0 |
| 4076532 | 158639 | None | Code 63 | Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and rolling and lowering into trenches, laying true to line and jointing of pipes and specials with electrofusion welding, giving hydraulic test as per relevant ISS with all lead and lifts including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excation, testing and commissioning. The rate is exclusive of required specials and fittings wherever necessary like saddle Tee, stub ends, flanged sets, bedns, reducers etc. complete (Contractor will make his own arrangements for procuring water for testing) etc. complete. NOTE: Upto 110mm dia Coil shall be used. For :HDPE PE 80 PN 6.0 (PWD UGD and water supply SR 2023-24 Volume - V Item no.9.1.1 page no.95) | Rmtr | 198.45 | 198.45 | 105.0 | False | None | None | False | None | False | 20837.25 | 0 |
| 4076533 | 158639 | None | Code 64 | Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments (PWD UGD and water supply SR 2023-24 Volume - V Item no.13.25.2 page no.154) | No. | 1627.5 | 1627.5 | 1.0 | False | None | None | False | None | False | 1627.5 | 0 |
| 4076534 | 158639 | None | Code 65 | Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog Voltmeter 1ni with Phase selector switch, Isolating switch OUTGOING for Main Electrical Pump: 1 No. MCB 1 No. DOL of S/D Starter suitable for respective HP 1 No. Electrcal Protection Like single Phase preventor, under voltage over Volage, under current over current & dry run protection suitable for the pump described above 1 no Indoor type NOTE: 1) DOL- Direct Online Starter
2) S-D- Star Delta Starter etc. complete.Upto 3 HP pumps (PWD UGD and water supply SR 2023-24 Volume - V Item no.13.24.1 page no.155) | Each | 7875.0 | 7875.0 | 1.0 | False | None | None | False | None | False | 7875.0 | 0 |
| 4076535 | 158639 | None | Code 66 | Labour charges for erection of outdoor type panel board and meter board units with all necessary materials and labour, tools and equipments including providing cement concrete foundation bed etc., complete as per specification, with testing of as per instructions of engineer incharge of work. (PWD UGD and water supply SR 2023-24 Volume - V Item no.13.34 page no.156) | Job | 1522.5 | 1522.5 | 1.0 | False | None | None | False | None | False | 1522.5 | 0 |
| 4076536 | 158639 | None | Code 67 | Supply and delivery at site best indigenous brand new power capacitor as per IS 2834/1986 with latest amendments with KPTCL authorities and erection, electrification and commissioning of the same at the location of respective pump sets. (PWD UGD and water supply SR 2023-24 Volume - V Item no.13.25 page no.155) | Kvar | 577.5 | 577.5 | 1.0 | False | None | None | False | None | False | 577.5 | 0 |
| 4076537 | 158639 | None | Code 68 | Supply and delivery at site delivery of best indigenous brand new MCB (Miniature Circuit Breakers) of required capacity as per IS 88228/1978 and its latest amendments and with ISI Mark of 6/10/16/20/25/40 Amps with scalable box. (PWD UGD and water supply SR 2023-24 Volume - V Item no.13.26 page no.155) | Each | 1207.5 | 1207.5 | 1.0 | False | None | None | False | None | False | 1207.5 | 0 |
| 4076538 | 158639 | None | Code 69 | Labour charges for providing connection using insulated sheathed steel wire cable as per IS 1554/ 1988 with latest amendments from KPTCL pole to meter board unit, with all necessary materials ,tools and equipments, as per specifications with testing of as per instructions of engineer in charge of work. 3 and half x 16 sqmm (PWD UGD and water supply SR 2023-24 Volume V Item no.13.35.2 page no.156) | Job | 168.0 | 168.0 | 1.0 | False | None | None | False | None | False | 168.0 | 0 |
| 4076539 | 158639 | None | Code 70 | Supplying heavy gauge PVC conduit pipe . dia . mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted wood plugs in case of RCC ceiling and RCC wall/ stone structure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws. 19/20mm dia 2mm thick | Mtr | 69.0 | 69.0 | 40.0 | False | None | None | False | None | False | 2760.0 | 0 |
| 4076540 | 158639 | None | Code 71 | Supplying heavy gauge PVC conduit pipe . dia . mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted wood plugs in case of RCC ceiling and RCC wall/ stone structure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws. 25mm dia 2mm thick. | Mtr | 81.0 | 81.0 | 40.0 | False | None | None | False | None | False | 3240.0 | 0 |
| 4076541 | 158639 | None | Code 72 | Supplying heavy gauge PVC conduit pipe . dia . mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted wood plugs in case of RCC ceiling and RCC wall/ stone structure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws. 32mm dia 2.5mm thick. | Mtr | 106.0 | 106.0 | 50.0 | False | None | None | False | None | False | 5300.0 | 0 |
| 4076542 | 158639 | None | Code 73 | Supplying heavy gauge PVC Conduit Pipe . dia . mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing Uor J hooks and cement plastering upto the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary. 19/20mm dia 2mm thick | Mtr | 68.0 | 68.0 | 20.0 | False | None | None | False | None | False | 1360.0 | 0 |
| 4076543 | 158639 | None | Code 74 | Supplying heavy gauge PVC Conduit Pipe . dia . mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing Uor J hooks and cement plastering upto the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary.25mm dia 2mm thick | Mtr | 79.0 | 79.0 | 40.0 | False | None | None | False | None | False | 3160.0 | 0 |
| 4076544 | 158639 | None | Code 75 | Supplying heavy gauge PVC Conduit Pipe . dia . mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing Uor J hooks and cement plastering upto the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary 32mm dia 2.5mm thick | Mtr | 105.0 | 105.0 | 40.0 | False | None | None | False | None | False | 4200.0 | 0 |
| 4076545 | 158639 | None | Code 76 | Supplying and fixing of PVC casing and capping on the wall or ceiling using necessary materials like bends, screws at an interval of 300mm …. etc. as required.25mm | Mtr | 35.0 | 35.0 | 25.0 | False | None | None | False | None | False | 875.0 | 0 |
| 4076546 | 158639 | None | Code 77 | Supplying And Fixing Metal Fan Box with Round Hook | No | 163.0 | 163.0 | 2.0 | False | None | None | False | None | False | 326.0 | 0 |
| 4076547 | 158639 | None | Code 78 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, ultistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments.
2.3.2 1.5 mm2 | Mtr | 26.0 | 26.0 | 40.0 | False | None | None | False | None | False | 1040.0 | 0 |
| 4076548 | 158639 | None | Code 79 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, ultistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments.2.3.3 2.5 mm2 | Mtr | 42.0 | 42.0 | 40.0 | False | None | None | False | None | False | 1680.0 | 0 |
| 4076549 | 158639 | None | Code 80 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, ultistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 2.3.4 4 mm2 | Mtr | 63.0 | 63.0 | 40.0 | False | None | None | False | None | False | 2520.0 | 0 |
| 4076550 | 158639 | None | Code 81 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, ultistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments.2.3.5 6 mm2 | Mtr | 92.0 | 92.0 | 40.0 | False | None | None | False | None | False | 3680.0 | 0 |
| 4076551 | 158639 | None | Code 82 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, ultistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments 2.3.6 10 mm2 | Mtr | 167.0 | 167.0 | 40.0 | False | None | None | False | None | False | 6680.0 | 0 |
| 4076552 | 158639 | None | Code 83 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 3.4.1 1-3 Way | Each | 138.0 | 138.0 | 1.0 | False | None | None | False | None | False | 138.0 | 0 |
| 4076553 | 158639 | None | Code 84 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 3.4.3 6 Way | Each | 177.0 | 177.0 | 1.0 | False | None | None | False | None | False | 177.0 | 0 |
| 4076554 | 158639 | None | Code 85 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 3.4.4 8 Way | Each | 220.0 | 220.0 | 1.0 | False | None | None | False | None | False | 220.0 | 0 |
| 4076555 | 158639 | None | Code 86 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 3.4.5 10-12 Way | Each | 261.0 | 261.0 | 1.0 | False | None | None | False | None | False | 261.0 | 0 |
| 4076556 | 158639 | None | Code 87 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 3.5.1 1 to 3 Module | Each | 127.0 | 127.0 | 1.0 | False | None | None | False | None | False | 127.0 | 0 |
| 4076557 | 158639 | None | Code 88 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 3.5.3 6 Module | Each | 175.0 | 175.0 | 1.0 | False | None | None | False | None | False | 175.0 | 0 |
| 4076558 | 158639 | None | Code 89 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 3.5.4 8 Module | Each | 302.0 | 302.0 | 1.0 | False | None | None | False | None | False | 302.0 | 0 |
| 4076559 | 158639 | None | Code 90 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 3.5.5 10-12 Module | Each | 284.0 | 284.0 | 1.0 | False | None | None | False | None | False | 284.0 | 0 |
| 4076560 | 158639 | None | Code 91 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 3.6.1 6A One Way Switch | Each | 102.0 | 102.0 | 1.0 | False | None | None | False | None | False | 102.0 | 0 |
| 4076561 | 158639 | None | Code 92 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 3.6.3 6A Three Way socket | Each | 171.0 | 171.0 | 1.0 | False | None | None | False | None | False | 171.0 | 0 |
| 4076562 | 158639 | None | Code 93 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 3.6.8 16A One Way Switch | Each | 177.0 | 177.0 | 1.0 | False | None | None | False | None | False | 177.0 | 0 |
| 4076563 | 158639 | None | Code 94 | Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase / 3 phase / single door with powder coated painting. Made out of 14 SWG MS enclosure. II - Double Door 5.18.6 4 Way SP & N | Each | 1368.0 | 1368.0 | 1.0 | False | None | None | False | None | False | 1368.0 | 0 |
| 4076564 | 158639 | None | Code 95 | Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase / 3 phase / single door with powder coated painting. Made out of 14 SWG MS enclosure. II - Double Door 5.18.7 6 Way SP & N | Each | 1102.0 | 1102.0 | 1.0 | False | None | None | False | None | False | 1102.0 | 0 |
| 4076565 | 158639 | None | Code 96 | Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 5.17.1 6-32 A SP | Each | 415.0 | 415.0 | 1.0 | False | None | None | False | None | False | 415.0 | 0 |
| 4076566 | 158639 | None | Code 97 | Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 5.17.7 6-32 A TPN | Each | 1717.0 | 1717.0 | 1.0 | False | None | None | False | None | False | 1717.0 | 0 |
| 4076567 | 158639 | None | Code 98 | Supplying, fixing and wiring Earth Leakage Miniature Circuit Breaker [ELMCB] 240/450V up to 300mA sensitivity on existing wood/panel board. 5.20.3 32-40 A 4 pole | Each | 2826.0 | 2826.0 | 1.0 | False | None | None | False | None | False | 2826.0 | 0 |
| 4076568 | 158639 | None | Code 99 | Supplying and fixing of Metal Socket set of 2pole and earth plugs and socket for incorporating SP and TP MCB (Without MCB ). The entire plug and socket shall be mounted in a thermoplastic / powder coated metal box & wired Completely. SP & N SP & N 5.45.2 20 A | Each | 971.0 | 971.0 | 1.0 | False | None | None | False | None | False | 971.0 | 0 |
| 4076569 | 158639 | None | Code 100 | Supplying and fixing of Metal Socket set of 2pole and earth plugs and socket for incorporating SP and TP MCB (Without MCB ). The entire plug and socket shall be mounted in a thermoplastic / powder coated metal box & wired Completely. SP & N TP & N 5.45.3 20 A | Each | 1340.0 | 1340.0 | 2.0 | False | None | None | False | None | False | 2680.0 | 0 |
| 4076570 | 158639 | None | Code 101 | 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part- 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 32.11 50 Sqmm, 3.5 Core, (16 GI Strips - 4 x 0.8 mm) | Km | 178973.0 | 178973.0 | 0.027 | False | None | None | False | None | False | 4832.271 | 0 |
| 4076571 | 158639 | None | Code 102 | Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff LT Cable
31.06 35 to 95 Sqmm | Km | 31139.0 | 31139.0 | 0.05 | False | None | None | False | None | False | 1556.95 | 0 |
| 4076572 | 158639 | None | Code 103 | Earth work excavation for cable trench of 0.5 to 0.75 Mtr. Width and Depth upto 1 Mtr including trial pits, depositing on bank upto a lead of 50 Mtr, Supplying and Displaying necessary Danger Boards and Lighting, Using sight Rails and Sign Boards at every 100 Mtr wherever necessary as directed. 29.03 In Hard Soil | Cum | 389.0 | 389.0 | 12.0 | False | None | None | False | None | False | 4668.0 | 0 |
| 4076573 | 158639 | None | Code 104 | Refilling the cable trenches with selected available earth from trench excavation including watering, consolidation in layers of 15 cm. Thickness including depositing of the surplus earth with a lead of 200 Mtr | Cum | 58.0 | 58.0 | 12.0 | False | None | None | False | None | False | 696.0 | 0 |
| 4076574 | 158639 | None | Code 105 | LED Indoor Supplying of .feet -PVC Batten with integrated LED tube . W with high quality diffuser with Life of 25000 burning hours & 70 Percent lumen maintenance with CRI Greater then 80. Power Input: 220 240V@ 50/60Hz & Power factor Greater then0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. 11.3.3 LED light fitting 1 x 4 36/40 W | Each | 1269.0 | 1269.0 | 3.0 | False | None | None | False | None | False | 3807.0 | 0 |
| 4076575 | 158639 | None | Code 106 | Supply of round/square recess/surface mounted rolling type LED Down light with . W GU 10 LED Lamp Rib Fabricated from diecast aluminium with white powder coated prewired to mains connector and has swivelling unit of aluminium die cast eye ball and LED Lamp position retained by circular wire spring, with Life of 25000 burning hours and 70Percent lumen maintenance with CRI Greater then 80. Power Input: 220-240V @50/60Hz and Power factor Greater then0.9 along with CE approved. 2years Warranty against any manufacturing defect working under standard electrical condition. 11.5.3 LED square or round down light 15-18W | Each | 1324.0 | 1324.0 | 4.0 | False | None | None | False | None | False | 5296.0 | 0 |