| 1727291054000 | 0 | None | None | Other Works | Construction of hi-tech toilet for Government Higher Primary Boys School in Chiradoni village Channagiri Taluk | 219899.82 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 4077048 | 158671 | None | ITEM01 | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. (PWD CSR 2023-24 Vol-I I.No- 2.11 (a) Pg No-18) | Tonne | 93929.85 | 93929.85 | 0.393 | False | None | None | False | None | False | 36914.43105 | 0 | | 4077049 | 158671 | None | ITEM02 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. (PWD SR 2023-24 Vol-2 I.No- 11.5.1 Pg No-77) | Sqm | 4701.9 | 4701.9 | 2.52 | False | None | None | False | None | False | 11848.788 | 0 | | 4077050 | 158671 | None | ITEM03 | Providing & fixing 30mm thick factory made rigid foam Panelled Door Shutters made from M.S. tube of 19 gauge thickness, size 19x19mm for stiles and 15x15mm for top & bottom rails, covered with heat moulded PVC C channel of 5mm thick sheet & 30 x 50mm wide to form stiles & 5mm thick & 75mm wide PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick 20mm wide PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet fitted in the M.S. Frame, Sealed to the stiles & rails with 5x30mm PVC sheet beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75 mm Aluminium hinges.(PWD SR Vol-II 2023-24 P.No-104, I.No-12.53) | Sqm | 1667.4 | 1667.4 | 1.35 | False | None | None | False | None | False | 2250.99 | 0 | | 4077051 | 158671 | None | ITEM04 | Providing and fixing M.S. grills of required pattern in frames of win dows etc. with M.S.flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc(PWD SR V-2 2023-24 P.No-86, I.No-11.34A) | Kg | 176.4 | 176.4 | 50.4 | False | None | None | False | None | False | 8890.56 | 0 | | 4077052 | 158671 | None | ITEM05 | Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment). Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.(PWD SR 2023-24 Vol-2 I.No-11.11.2 Pg No-78) | Kg | 112.35 | 112.35 | 60.0 | False | None | None | False | None | False | 6741.0 | 0 | | 4077053 | 158671 | None | ITEM06 | Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (PWD SR-V-II 2023-24/P.No.41/8.2.2) | Sqm | 292.95 | 292.95 | 52.87 | False | None | None | False | None | False | 15488.2665 | 0 | | 4077054 | 158671 | None | ITEM07 | Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.(PWD SR V-II 2023-24/P.No.42/8.8) | Sqm | 389.55 | 389.55 | 64.44 | False | None | None | False | None | False | 25102.602 | 0 | | 4077055 | 158671 | None | ITEM08 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. (PWD SR V-2 2023-24/P.No.50/I.No.8.51) | Sqm | 105.0 | 105.0 | 16.0 | False | None | None | False | None | False | 1680.0 | 0 | | 4077056 | 158671 | None | ITEM09 | Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (PWD SR V-II 2023-24/P.No.48/I.No.8.39) | Sqm | 133.35 | 133.35 | 28.49 | False | None | None | False | None | False | 3799.1415 | 0 | | 4077057 | 158671 | None | ITEM10 | Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (PWD SR 2023-24 Vol-2 I.No- 8.28 Pg No-45) | Sqm | 93.45 | 93.45 | 64.44 | False | None | None | False | None | False | 6021.918 | 0 | | 4077058 | 158671 | None | ITEM11 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (PWD SR V-II 2023-24/P.No.48/I.No.8.40) | Sqm | 152.25 | 152.25 | 10.82 | False | None | None | False | None | False | 1647.345 | 0 | | 4077059 | 158671 | None | ITEM12 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 600x600 mm(PWD SR 2023-24 Vol-2 I.No- 9.17.2 Pg No-61) | Cum | 1233.75 | 1233.75 | 16.0 | False | None | None | False | None | False | 19740.0 | 0 | | 4077060 | 158671 | None | ITEM13 | Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. (PWD SR 2023-24 Vol-2 I.No- 9.39 Pg No-65 | Sqm | 1521.45 | 1521.45 | 19.95 | False | None | None | False | None | False | 30352.9275 | 0 | | 4077061 | 158671 | None | ITEM14 | A 13.34 Providing and fixing reectangure high density on terrace, polyethylene water storage tanks covering confoming to ISI:12701,Colour of poaque white complete as per specifications.(For 500 litre capacity) Specification No.KBS 13.22, Shivamogga circle PWD SR 2021-22, P.No.96, I.no- 13.78 (PWD SR 2023-24 P.NO.116 I.NO 13.34A ( VOLUME -2) | Ltr | 9.45 | 9.45 | 500.0 | False | None | None | False | None | False | 4725.0 | 0 | | 4077062 | 158671 | None | ITEM15 | Providing and fixing chlorinated polyvinyl chloriod(CPVC)Pipes having thermal stability for hot & cold water supply,including all CPVC Plain & Brass Threaded fitting including fixing thepipe with clamps at 1.00m spacing this includes jointing of pipes & fitting with one step cpvc solvent cement and testing of jointing completed as per direction of enginieer in charge (PWD SR 2023-24 P.NO.122 I.NO 13.31.3 (VOLUME -2) 25mm noninal dia pipes. Internal Work : Exposed on Wall | Mtr | 333.9 | 333.9 | 20.0 | False | None | None | False | None | False | 6678.0 | 0 | | 4077063 | 158671 | None | ITEM16 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: (PWD SR 2023-24 P.NO.131 I.NO 14.1.1 (VOLUME -2) | Each | 5128.2 | 5128.2 | 1.0 | False | None | None | False | None | False | 5128.2 | 0 | | 4077064 | 158671 | None | ITEM17 | Providing and fixing PTMT bib cock of approved quality and colour.15mm nominal bore, 86 mm long, weighing not less than 88 g [P.No-120 ,I.No-13.17.1] (PWD SR 2023-24) Volume-2 | Nos | 165.9 | 165.9 | 8.0 | False | None | None | False | None | False | 1327.2 | 0 | | 4077065 | 158671 | None | ITEM18 | PVC pipes of 8 Kg/cm2 for 110mm (1.894) [P.No-A-45 ,I.No-683 ] (PWD SR 2023-24) Volume-5 | Mtr | 297.15 | 297.15 | 8.0 | False | None | None | False | None | False | 2377.2 | 0 | | 4077066 | 158671 | None | ITEM19 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brasspillar taps, 32 mm C.P. brass waste of standard pattern, includingpainting of fittings and brackets, cutting and making good the wallswherever require. White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap(PWD SR 2023-24 P.NO.132 I.NO 14.7.4 VOL -2) | Each | 2462.25 | 2462.25 | 1.0 | False | None | None | False | None | False | 2462.25 | 0 | | 4077067 | 158671 | None | ITEM20 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : One urinal basin with 5 litre white P.V.C. automatic flushing cistern [P.No-131 ,I.No-14.4.1] (PWD SR 2023-24) Volume-2 | Each | 4454.0 | 4454.0 | 6.0 | False | None | None | False | None | False | 26724.0 | 0 |
|