createdTs	None
version	None
createdDate	None
modifiedDate	None
noticeInvitingTenderDTO	createdTs 1727323381798 version 10 createdDate None modifiedDate None tenderType RFQ evaluationType TWO_COVER evaluationTypeText Two Cover invitingStrategy OPEN invitingStrategyText Open taxType INCLUSIVE_TAX tenderFee 2040.00 emd 162467.00 bidValueType ITEM_WISE bidValueTypeText Item wise tenderReceiptClose 15-10-2024 17:30:00 tenderQueryClose 12-10-2024 17:30:00 technicalBidOpen 18-10-2024 11:00:00 publishedDate 26-09-2024 11:39:34 publishedByPost DUDC_EE_KLB publishedByUser KPE12844 - SOMU SHANKAR bidValidityPeriod 90 noOfCalls 3 preBidMeetingDate 08-10-2024 12:00:00 preBidMeetingYn True preQualificationBidOpen None denominationType RUPEES denominationTypeText Rupees retenderedYn True percentageRateTypeText None contactPerson Somu Rathod splitEmdRequiredYn False emdBankGuarantee None emdCash None bgValidityPeriod None hideWeightage None multipleCurrencySelectionAllowedYn False isTechWeightageAllowed False highestBidderSelection False isVariableEmdAllowed None qcbsTenderYn None itemwiseEmdRequiredYn None sampleSubmissionDate None officeNumber None mobileNumber 9880510192 tenderSupplierList None
tenderSchedule	createdTs 1727323381801 version 26 createdDate None modifiedDate None tenderNumber DMA/2023-24/OW/WORK_INDENT17574/CALL-3 title Development of Sevalal temple in ward no 4 in wadi town. Construction of Maratha asn sevlal bhavan in wadi town. Constrcution of Toilet for Physically disabled peoples in wadi town. description Development of Sevalal temple in ward no 4 in wadi town. Construction of Maratha asn sevlal bhavan in wadi town. Constrcution of Toilet for Physically disabled peoples in wadi town. category WORKS categoryText Works ecv 8123342.02 deptName Directorate of Municipal Administration status PUBLISHED statusText Published remarks None csrValue None ecvtenderYn True location 2188 locationName DMA District Urban Development Cell Kalaburagi provisionalAmount 9625000.0 groupOverheadTotal None fileNumber TMCWadi/CMSTDP4/1
tenderSubEstimateList	createdTs version createdDate modifiedDate workCategoryName subEstimateName estimateTotal itemList 1727323382000 1 None None Other Works Construction of Maratha and Savita Smaja Bhavan in wadi town. 4247483.72 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 4077172 158678 None code01 Construction of Maratha samaja bhavan Earth work excavation by manual means for drains,canals, waste weir draft, approach channels, key trench, foundation of Bridges and such similar works, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, excavated surface leveled and sides neatly dressed disposing off or leveling the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage & other appurtenances required to complete the work. Depth exceeding 1.5m, but not exceeding 3 m Cum 467.25 467.25 115.46 False None None False None False 53948.685 0 4077173 158678 None code02 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates Cum 6288.45 6288.45 8.61 False None None False None False 54143.5545 0 4077174 158678 None code03 Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 7170.28 7170.28 14.7 False None None False None False 105403.116 0 4077175 158678 None code04 Providing Coursed rubble masonry (second sort) with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 6515.25 6515.25 25.34 False None None False None False 165096.435 0 4077176 158678 None code05 Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 6708.45 6708.45 9.61 False None None False None False 64468.2045 0 4077177 158678 None code06 Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cost of materials, labour, curing as per specifications and as per directions of Engineer in charge. Sqm 267.75 267.75 33.684 False None None False None False 9018.891 0 4077178 158678 None code07 Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) 2.3.2 M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 11566.8 11566.8 5.53 False None None False None False 63964.404 0 4077179 158678 None code08 Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) 2.3.2 M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 10886.4 10886.4 2.01 False None None False None False 21881.664 0 4077180 158678 None code09 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. Cum 279.3 279.3 110.39 False None None False None False 30831.927 0 4077181 158678 None code10 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. Cum 8376.9 8376.9 50.36 False None None False None False 421860.684 0 4077182 158678 None code11 Providing and laying in position Reinforced cement concrete for all Super structures of building, Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super lasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) 2.5.1 M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 11138.4 11138.4 2.23 False None None False None False 24838.632 0 4077183 158678 None code12 Providing and laying in position Reinforced cement concrete for all Super structures of building, Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, uring and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) 2.5.1 M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 11138.4 11138.4 0.4049 False None None False None False 4509.93816 0 4077184 158678 None code13 Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) 2.3.2 M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 10886.4 10886.4 3.412 False None None False None False 37144.3968 0 4077185 158678 None code14 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super lasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) 2.5.1 M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 10442.25 10442.25 15.2925 False None None False None False 159688.108125 0 4077186 158678 None code15 Supplying, Fitting and Placing TMT Fe 500 & above Reinforcement in Foundation / Substructure Superstructure complete as per Drawing and Technical Specifications. Tonne 90754.65 90754.65 2.572 False None None False None False 233420.9598 0 4077187 158678 None code16 Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. M.S. tube including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineerin Charge. Page No.82 Item no.11.26.1 KPWD. Volumn 2 DSR2023 24 Kg 144.9 144.9 78.37 False None None False None False 11355.813 0 4077188 158678 None code17 Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. Cum 144977.7 144977.7 0.1025 False None None False None False 14860.21425 0 4077189 158678 None code18 Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long brackets of 15x15mm M.S Square tube, the entire door frame to be reinforced with 19x19mm M.S Square tube of 19 gauge. The door frame to be fixed to the wall using M.S. Screws of 65/80mm size complete as per manufacturers specification & direction of Engineer in charge. Sqm 333.9 333.9 0.3 False None None False None False 100.17 0 4077190 158678 None code19 Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Prelaminated PVC C Channel of 5mm thick sheet & 30x50mm wide to form stiles & 5mm thick & 75mm wide Prelaminated PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet Prelaminated on either side fitted in the M.S. frame, Sealed to the stiles & rails with PVC Designer beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer in charge fixed to frames with 3 nos of 75mm Aluminium hinges with one side prelam Sqm 2142.0 2142.0 1.89 False None None False None False 4048.38 0 4077191 158678 None code20 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings / wooden frames with rawl plugs screws etc. Sqm 192.15 192.15 211.68 False None None False None False 40674.312 0 4077192 158678 None code21 Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, uring complete as per specifications and as per directions of Engineer in charge. Sqm 253.05 253.05 144.3474 False None None False None False 36527.10957 0 4077193 158678 None code22 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per pecifications and as per directions of Engineer in charge. Sqm 105.0 105.0 144.3474 False None None False None False 15156.477 0 4077194 158678 None code23 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement ortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever equired smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer in charge. Sqm 389.55 389.55 236.2107 False None None False None False 92015.878185 0 4077195 158678 None code24 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per pecifications and as per directions of Engineer in charge. Sqm 133.35 133.35 144.3474 False None None False None False 19248.72579 0 4077196 158678 None code25 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two coats applied at the rate 1.43 ltr/10 over and including priming coat of exterior primer applied at the rate 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to move all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer in charge. Sqm 186.9 186.9 236.21 False None None False None False 44147.649 0 4077197 158678 None code26 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter ncluding preparing the surface even and sand paper smooth, cost of materials, labour complete as per pecifications and as per directions of Engineer in charge. Sqm 120.75 120.75 18.0 False None None False None False 2173.5 0 4077198 158678 None code27 Providing & fixing of 3 track x 2 panel sliding windows made out of multi chambered UPVC(Matching to RAL 9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets grey colour having isolated drainage and reinforced with Galvanized Iron profile hrough out the window frame The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm nd mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm 2.5mm. Maximum possible size 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) Sqm 7070.7 7070.7 9.0 False None None False None False 63636.3 0 4077199 158678 None code28 Providing and fixing in position fully panelled Honne wood shutters for doors with , stiles and rails of 35mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. (excluding cost of fixtures) Sqm 9952.95 9952.95 4.2 False None None False None False 41802.39 0 4077200 158678 None code29 Polishing on wood work with ready mixed wax polish of approved brand and manufacture : New work to give an even surface including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering smooth, cost of materials, labour complete as per specifications and as per directions of Engineer in charge. Sqm 141.75 141.75 8.4 False None None False None False 1190.7 0 4077201 158678 None code30 Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry at the rate 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 800x800 mm Sqm 1351.35 1351.35 63.1973 False None None False None False 85401.671355 0 4077202 158678 None code31 WATER SUPPLY WORKS Of Maratha samja Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work Exposed on wall Mtr 333.9 333.9 10.0 False None None False None False 3339.0 0 4077203 158678 None code32 Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, including dressing of excavated surfaces, disposing off or leveling the excavated earth or sorting & stacking the elected earth for reuse in a radius of 50 m. Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering and lift upto 1.5 m including cost of labour, tools, usage& other appurtenances required to complete the work. Cum 508.2 508.2 10.0 False None None False None False 5082.0 0 4077204 158678 None code33 Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and ommissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. complete For: Mtr 70.35 70.35 10.0 False None None False None False 703.5 0 4077205 158678 None code34 P/F PTMT BIB COCK Providing and fixing PTMT bib cock of approved quality and colour.15mm nominal bore, 86 mm long, weighing not less than 88 g No 167.48 167.48 6.0 False None None False None False 1004.88 0 4077206 158678 None code35 P/F PTMT STOPCOCK CONCEALED Concealed stop cock, 15 mm nominal bore, 108 mm long, weighing not less than 108 gms No 213.06 213.06 2.0 False None None False None False 426.12 0 4077207 158678 None code36 P/F BRASS BALL VALVE Providing and fixing Brass full way valve gate with C.I. wheel of Approved quality (screwed end) : ( item no 13..4.1 ) page no 115 PWP. DSR 2023 24 No 581.94 581.94 2.0 False None None False None False 1163.88 0 4077208 158678 None code37 P/F WASH BASIN Providing and fixing wash basin with C.I. brackets, 15 mm PTMT pillar cock, 32 mm PTMT waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm PTMT pillar cock. (item no 14.7B ) page no 125 PWP. DSR 2023 24 No 2410.8 2410.8 1.0 False None None False None False 2410.8 0 4077209 158678 None code38 15 mm nominal bore, 125 mm long foam flow, weighing not less than 120 gms13 No 332.84 332.84 2.0 False None None False None False 665.68 0 4077210 158678 None code39 PVC connection pipe No 96.46 96.46 1.0 False None None False None False 96.46 0 4077211 158678 None code40 SANITARY WORK WATER CLOSET EUROPEAN TYPE Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : ( item no 14.2 ) page no 123 PWP. DSR 2023 24 Pan 5079.0 5079.0 1.0 False None None False None False 5079.0 0 4077212 158678 None code41 WASTE PIPE Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe32 mm dia ( item no 14.28.2.1 ) page no 123 PWP. DSR 2023 24 Each 97.52 97.52 1.0 False None None False None False 97.52 0 4077213 158678 None code42 WASTE PIPE RIGID Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. SEMI RIGID pipe32 mm dia ( item no 14.28.1.1 ) page no 123 PWP. DSR 2023 24 Each 80.56 80.56 1.0 False None None False None False 80.56 0 4077214 158678 None code43 PVC PIPE Supplying UNPLASTICISED PVC pipes conforming to IS 16098:2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading and unloading at both destinations and cuts of pipes wherever necessary including jointing of UPVC pipes (with cost of elastomeric sealing rings) and specials (excluding cost of specials) with jointing of approved type, with all labour, lead & lifts, including encasing the pipes alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (contractor will make his own arrangements for procuring water for testing) etc. for: Pipes of SN4, 110mm dia. ( item no 2.2) page no 134 VOLUME 5 PWP. DSR 2023 24 Mtr 287.26 287.26 6.0 False None None False None False 1723.56 0 4077215 158678 None code44 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS: 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base suooort for tank. Ltr 9.45 9.45 1000.0 False None None False None False 9450.0 0 4077216 158678 None code45 WASTE PIPE RIGID Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe32 mm dia ( item no 14.28.2.1 ) page no 123 PWP. DSR 2023 24 Each 97.52 97.52 1.0 False None None False None False 97.52 0 4077217 158678 None code46 Sinking of Maratha samaj Borewell Geophysical investigation at site for sinking borewells for Providing drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical sounding by adopting Venner or Schlumbergers's method, including reconnaissance survey of geological formation. Geophysical investigation of existing ground water in the vicinity, its quality, quantity and acceptability of the users, indicating the location of the site, recommended depth of casing pipe required to seal the top unconsolidated formation including an extra depth of 1.0 metre in consolidated formation for proper seating of casing pipe, depth of drilling required to cover full depth of aquifer proposed to be tapped, probable yield and other information required including transportation of instruments and accessories to work site, engaging technical personal and labour required etc. NOTE: 1) Additional rate on item 1&2 is allowed for drilling in over burden and fixing Casing pipes beyond 20 M (for fixing Casing pipes only) a) Above 20 M and upto 30 M 15%, b) Above 30 M 30% (Measurement of overburden is restricted to the depth of casing pipe fixed excluding initial depth of 20M and projection above ground level). 2) A sum of Rs. 100/ is to be deducted for Dry Borewell towards yield test. etc. complete (KPWD SR VOL V for the year 2023 24. I. No. 12.4 P.No. 140 ) No 5552.0 5552.0 1.0 False None None False None False 5552.0 0 4077218 158678 None code47 Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete ) (Above 450m of drilling add 10% for every 50m depth) Borewell depth of 0 to 50 Mtrs (KPWD SR VOL V for the year 2023 24. I. No. 12.1.1 P.No. 132 ) Mtr 388.5 388.5 50.0 False None None False None False 19425.0 0 4077219 158678 None code48 Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete ) (Above 450m of drilling add 10% for every 50m depth) Borewell depth of 50 to 100 Mtrs (KPWD SR VOL V for the year 2023 24. I. No. 12.1.2 P.No. 132 ) Mtr 487.2 487.2 50.0 False None None False None False 24360.0 0 4077220 158678 None code49 Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete ) (Above 450m of drilling add 10% for every 50m depth) Borewell depth of 100 to 150 Mtrs (KPWD SR VOL V for the year 2023 24. I. No. 12.1.3 P.No. 132 ) Mtr 517.65 517.65 10.0 False None None False None False 5176.5 0 4077221 158678 None code50 PVC pipes of 6 Kg/cm2 for 160mm (KPWD SR VOL V for the year 2023 24. Sl No. 649 P.No. A44 ) Mtr 441.0 441.0 6.0 False None None False None False 2646.0 0 4077222 158678 None code51 PVC pipes of 6 Kg/cm2 for 110mm (KPWD SR VOL V for the year 2023 24. Sl No. 647 P.No. A44 ) Mtr 267.75 267.75 110.0 False None None False None False 29452.5 0 4077223 158678 None code52 Providing and laying at site of work MS casing caps as per IS 1239 (part II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum). The dimensions of caps and colars shall be strictly as per IS 1239 (Part II) 1982 with all Amendments including cost of material and labour charges for fixing, if any etc. complete with all lead and lifts and as directed by the Engineer in Charge ( (PWD UGD and water supply SR 2023 24 Volume V Item no.12.34 page no.143) Mtr 172.2 172.2 1.0 False None None False None False 172.2 0 4077224 158678 None code53 Providing, Single Phase Submersible Pump Sets of 100mm dia (4 inch) suitable for bore well confirming to IS 8034 2000 specifications, to work site with testing of as per instructions of engineer incharge of work and latest ammendments 1.50 HP/1.1KW 20 STG (PWD UGD and water supply SR 2023 24 Volume V Item no.13.7.7 page no.150) No 19128.9 19128.9 1.0 False None None False None False 19128.9 0 4077225 158678 None code54 Supply and delivery at site Stringing of heavy duty Naylone/PP rope with ISI etc complete suitable for Single phase Pumpsets. (PWD UGD and water supply SR 2023 24 Volume V Item no.13.31 page no.155) Mtr 42.0 42.0 110.0 False None None False None False 4620.0 0 4077226 158678 None code55 Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well caps, cable clips and water tight gland cable protectors, bolts, nuts, valve and gauges,tools and equipments etc., involved in the job as per specifications, with necessary tests as per specifications, with testing of as per instructions of engineer incharge of work. (PWD UGD and water supply SR 2023 24 Volume V Item no.13.32 page no.156) Job 6825.0 6825.0 1.0 False None None False None False 6825.0 0 4077227 158678 None code56 Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694 1990 with ISI Mark and as per its latest amendments. 1x3x6 Sqm. (PWD UGD and water supply SR 2023 24 Volume V Item no.13.22.4 page no.154) Mtr 194.25 194.25 115.0 False None None False None False 22338.75 0 4077228 158678 None code57 Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984 2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and rolling and lowering into trenches, laying true to line and jointing of pipes and specials with electrofusion welding, giving hydraulic test as per relevant ISS with all lead and lifts including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excation, testing and commissioning. The rate is exclusive of required specials and fittings wherever necessary like saddle Tee, stub ends, flanged sets, bedns, reducers etc. complete (Contractor will make his own arrangements for procuring water for testing) etc. complete. NOTE: Upto 110mm dia Coil shall be used. For :HDPE PE 80 PN 6.0 (PWD UGD and water supply SR 2023 24 Volume V Item no.9.1.1 page no.95) Mtr 198.45 198.45 105.0 False None None False None False 20837.25 0 4077229 158678 None code58 Supply and delivery at site of brand new best make non return valve as per IS 778/1984 with ISI Mark and as per its latest amendments (PWD UGD and water supply SR 2023 24 Volume V Item no.13.25.2 page no.154) No 1627.5 1627.5 1.0 False None None False None False 1627.5 0 4077230 158678 None code59 Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog Voltmeter 1ni with Phase selector switch, Isolating switch OUTGOING for Main Electrical Pump: 1 No. MCB 1 No. DOL of S/D Starter suitable for respective HP 1 No. Electrcal Protection Like single Phase preventor, under voltage over Volage, under current over current & dry run protection suitable for the pump described above 1 no Indoor type NOTE: 1) DOL Direct Online Starter 2) S D Star Delta Starter etc. complete.Upto 3 HP pumps (PWD UGD and water supply SR 2023 24 Volume V Item no.13.24.1 page no.155) Each 7875.0 7875.0 1.0 False None None False None False 7875.0 0 4077231 158678 None code60 Labour charges for erection of outdoor type panel board and meter board units with all necessary materials and labour, tools and equipments including providing cement concrete foundation bed etc., complete as per specification, with testing of as per instructions of engineer incharge of work. (PWD UGD and water supply SR 2023 24 Volume V Item no.13.34 page no.156) Job 1522.5 1522.5 1.0 False None None False None False 1522.5 0 4077232 158678 None code61 Supply and delivery at site best indigenous brand new power capacitor as per IS 2834/1986 with latest amendments with KPTCL authorities and erection, electrification and commissioning of the same at the location of respective pump sets. (PWD UGD and water supply SR 2023 24 Volume V Item no.13.25 page no.155) Kvar 577.5 577.5 1.0 False None None False None False 577.5 0 4077233 158678 None code62 Supply and delivery at site delivery of best indigenous brand new MCB (Miniature Circuit Breakers) of required capacity as per IS 88228/1978 and its latest amendments and with ISI Mark of 6/10/16/20/25/40 Amps with scalable box. (PWD UGD and water supply SR 2023 24 Volume V Item no.13.26 page no.155) No 1207.5 1207.5 1.0 False None None False None False 1207.5 0 4077234 158678 None code63 Labour charges for providing connection using insulated sheathed steel wire cable as per IS 1554/ 1988 with latest amendments from KPTCL pole to meter board unit, with all necessary materials ,tools and equipments,as per specificationswith testing of as per instructions of engineer incharge of work. 3.5 x 16 sqmm (PWD UGD and water supply SR 2023 24 Volume V Item no.13.35.2 page no.156) No 168.0 168.0 1.0 False None None False None False 168.0 0 4077235 158678 None code64 ELECTRICAL WORK Construction of Savitha samaj Bhavan Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead Cum 754.95 754.95 4.675 False None None False None False 3529.39125 0 4077236 158678 None code65 PWD SR 2023 24 V III Item No. 2.11 (ii) A, Page No. 08 Cum 189.0 189.0 60.2174 False None None False None False 11381.0886 0 4077237 158678 None code66 PWD SR 2023 24 V III Item No. 2.13 B, Page No. 09 Sqm 2109.45 2109.45 1.9925 False None None False None False 4203.079125 0 4077238 158678 None code67 Earth work excavation by manual means for drains,canals, waste weir draft, approach channels, key trench, foundation of Bridges and such similar works, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, excavated surface leveled and sides neatly dressed disposing off or leveling the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage & other appurtenances required to complete the work. Depth exceeding 1.5m, but not exceeding 3 m Cum 467.25 467.25 115.46 False None None False None False 53948.685 0 4077239 158678 None code68 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates Cum 6288.45 6288.45 8.61 False None None False None False 54143.5545 0 4077240 158678 None code69 Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 7170.28 7170.28 14.7 False None None False None False 105403.116 0 4077241 158678 None code70 Providing Coursed rubble masonry (second sort) with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 6515.25 6515.25 25.3381 False None None False None False 165084.056025 0 4077242 158678 None code71 Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 6708.45 6708.45 9.608 False None None False None False 64454.7876 0 4077243 158678 None code72 Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cost of materials, labour, curing as per specifications and as per directions of Engineer in charge. Sqm 267.75 267.75 33.684 False None None False None False 9018.891 0 4077244 158678 None code73 Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) 2.3.2 M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 11566.8 11566.8 5.5269 False None None False None False 63928.54692 0 4077245 158678 None code74 Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) 2.3.2 M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 10886.4 10886.4 2.006 False None None False None False 21838.1184 0 4077246 158678 None code75 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. Cum 279.3 279.3 110.393 False None None False None False 30832.7649 0 4077247 158678 None code76 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. Cum 8376.9 8376.9 50.3591 False None None False None False 421853.14479 0 4077248 158678 None code77 Providing and laying in position Reinforced cement concrete for all Super structures of building, Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super lasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) 2.5.1 M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 11138.4 11138.4 2.23 False None None False None False 24838.632 0 4077249 158678 None code78 Providing and laying in position Reinforced cement concrete for all Super structures of building, Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, uring and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) 2.5.1 M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 11138.4 11138.4 0.404 False None None False None False 4499.9136 0 4077250 158678 None code79 Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) 2.3.2 M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 10206.0 10206.0 3.412 False None None False None False 34822.872 0 4077251 158678 None code80 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super lasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) 2.5.1 M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 10442.25 10442.25 15.2925 False None None False None False 159688.108125 0 4077252 158678 None code81 Supplying, Fitting and Placing TMT Fe 500 & above Reinforcement in Foundation / Substructure Superstructure complete as per Drawing and Technical Specifications. Tonne 90754.65 90754.65 2.572 False None None False None False 233420.9598 0 4077253 158678 None code82 Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. Cum 144977.7 144977.7 0.1025 False None None False None False 14860.21425 0 4077254 158678 None code83 Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long brackets of 15x15mm M.S Square tube, the entire door frame to be reinforced with 19x19mm M.S Square tube of 19 gauge. The door frame to be fixed to the wall using M.S. Screws of 65/80mm size complete as per manufacturers specification & direction of Engineer in charge. Sqm 333.9 333.9 0.3 False None None False None False 100.17 0 4077255 158678 None code84 Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Prelaminated PVC C Channel of 5mm thick sheet & 30x50mm wide to form stiles & 5mm thick & 75mm wide Prelaminated PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet Prelaminated on either side fitted in the M.S. frame, Sealed to the stiles & rails with PVC Designer beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer in charge fixed to frames with 3 nos of 75mm Aluminium hinges with one side prelam Sqm 2142.0 2142.0 1.89 False None None False None False 4048.38 0 4077256 158678 None code85 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings / wooden frames with rawl plugs screws etc. Sqm 192.15 192.15 211.68 False None None False None False 40674.312 0 4077257 158678 None code86 Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. M.S. tube including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineerin Charge. Page No.82 Item no.11.26.1 KPWD. Volumn 2 DSR2023 24 Kg 144.9 144.9 78.37 False None None False None False 11355.813 0 4077258 158678 None code87 Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, uring complete as per specifications and as per directions of Engineer in charge. Sqm 253.05 253.05 144.3474 False None None False None False 36527.10957 0 4077259 158678 None code88 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per pecifications and as per directions of Engineer in charge. Sqm 105.0 105.0 144.3474 False None None False None False 15156.477 0 4077260 158678 None code89 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement ortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever equired smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer in charge. Sqm 389.55 389.55 236.21 False None None False None False 92015.6055 0 4077261 158678 None code90 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per pecifications and as per directions of Engineer in charge. Sqm 133.35 133.35 144.3474 False None None False None False 19248.72579 0 4077262 158678 None code91 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two coats applied at the rate 1.43 ltr/10 m² over and including priming coat of exterior primer applied at the rate 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to move all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer in charge. Sqm 186.9 186.9 236.21 False None None False None False 44147.649 0 4077263 158678 None code92 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter ncluding preparing the surface even and sand paper smooth, cost of materials, labour complete as per pecifications and as per directions of Engineer in charge. Sqm 120.75 120.75 18.0 False None None False None False 2173.5 0 4077264 158678 None code93 Providing & fixing of 3 track x 2 panel sliding windows made out of multi chambered UPVC(Matching to RAL 9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets grey colour having isolated drainage and reinforced with Galvanized Iron profile hrough out the window frame The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm nd mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm 2.5mm. Maximum possible size 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) Sqm 7070.7 7070.7 9.0 False None None False None False 63636.3 0 4077265 158678 None code94 Providing and fixing in position fully panelled Honne wood shutters for doors with , stiles and rails of 35mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. (excluding cost of fixtures) Sqm 7439.25 7439.25 4.2 False None None False None False 31244.85 0 4077266 158678 None code95 Polishing on wood work with ready mixed wax polish of approved brand and manufacture : New work to give an even surface including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering smooth, cost of materials, labour complete as per specifications and as per directions of Engineer in charge. Sqm 141.75 141.75 8.4 False None None False None False 1190.7 0 4077267 158678 None code96 Providing and laying vitrified floor tiles with thickness 9 10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry at the rate 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm Sqm 1136.1 1136.1 63.19 False None None False None False 71790.159 0 4077268 158678 None code97 WATER SUPPLY WORKS Of Savitha samja Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work Exposed on wall Mtr 333.9 333.9 10.0 False None None False None False 3339.0 0 4077269 158678 None code98 Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, including dressing of excavated surfaces, disposing off or leveling the excavated earth or sorting & stacking the elected earth for reuse in a radius of 50 m. Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering and lift upto 1.5 m including cost of labour, tools, usage& other appurtenances required to complete the work. Cum 508.2 508.2 10.0 False None None False None False 5082.0 0 4077270 158678 None code99 Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and ommissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. complete For: Mtr 70.35 70.35 10.0 False None None False None False 703.5 0 4077271 158678 None code100 P/F PTMT BIB COCK Providing and fixing PTMT bib cock of approved quality and colour.15mm nominal bore, 86 mm long, weighing not less than 88 g No 167.48 167.48 6.0 False None None False None False 1004.88 0 4077272 158678 None code101 P/F PTMT STOPCOCK CONCEALED Concealed stop cock, 15 mm nominal bore, 108 mm long, weighing not less than 108 gms No 213.06 213.06 2.0 False None None False None False 426.12 0 4077273 158678 None code102 P/F BRASS BALL VALVE Providing and fixing Brass full way valve gate with C.I. wheel of Approved quality (screwed end) : ( item no 13..4.1 ) page no 115 PWP. DSR 2023 24 No 581.94 581.94 2.0 False None None False None False 1163.88 0 4077274 158678 None code103 P/F WASH BASIN Providing and fixing wash basin with C.I. brackets, 15 mm PTMT pillar cock, 32 mm PTMT waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm PTMT pillar cock. (item no 14.7B ) page no 125 PWP. DSR 2023 24 No 2410.8 2410.8 1.0 False None None False None False 2410.8 0 4077275 158678 None code104 15 mm nominal bore, 125 mm long foam flow, weighing not less than 120 gms13 No 332.84 332.84 2.0 False None None False None False 665.68 0 4077276 158678 None code105 PVC connection pipe No 96.46 96.46 1.0 False None None False None False 96.46 0 4077277 158678 None code106 SANITARY WORK WATER CLOSET EUROPEAN TYPE Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : ( item no 14.2 ) page no 123 PWP. DSR 2023 24 Pan 5079.0 5079.0 1.0 False None None False None False 5079.0 0 4077278 158678 None code107 WASTE PIPE Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe32 mm dia ( item no 14.28.2.1 ) page no 123 PWP. DSR 2023 24 Each 97.52 97.52 1.0 False None None False None False 97.52 0 4077279 158678 None code108 WASTE PIPE RIGID Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. SEMI RIGID pipe32 mm dia ( item no 14.28.1.1 ) page no 123 PWP. DSR 2023 24 Each 80.56 80.56 1.0 False None None False None False 80.56 0 4077280 158678 None code109 PVC PIPE Supplying UNPLASTICISED PVC pipes conforming to IS 16098:2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading and unloading at both destinations and cuts of pipes wherever necessary including jointing of UPVC pipes (with cost of elastomeric sealing rings) and specials (excluding cost of specials) with jointing of approved type, with all labour, lead & lifts, including encasing the pipes alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (contractor will make his own arrangements for procuring water for testing) etc. for: Pipes of SN4, 110mm dia. ( item no 2.2) page no 134 VOLUME 5 PWP. DSR 2023 24 Mtr 287.26 287.26 6.0 False None None False None False 1723.56 0 4077281 158678 None code110 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS: 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base suooort for tank. Ltr 9.45 9.45 1000.0 False None None False None False 9450.0 0 4077282 158678 None code111 WASTE PIPE RIGID Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe32 mm dia ( item no 14.28.2.1 ) page no 123 PWP. DSR 2023 24 Each 97.52 97.52 1.0 False None None False None False 97.52 0 4077283 158678 None code112 Sinking of Borewell at savitha samaj Geophysical investigation at site for sinking borewells for Providing drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical sounding by adopting Venner or Schlumbergers's method, including reconnaissance survey of geological formation. Geophysical investigation of existing ground water in the vicinity, its quality, quantity and acceptability of the users, indicating the location of the site, recommended depth of casing pipe required to seal the top unconsolidated formation including an extra depth of 1.0 metre in consolidated formation for proper seating of casing pipe, depth of drilling required to cover full depth of aquifer proposed to be tapped, probable yield and other information required including transportation of instruments and accessories to work site, engaging technical personal and labour required etc. NOTE: 1) Additional rate on item 1&2 is allowed for drilling in over burden and fixing Casing pipes beyond 20 M (for fixing Casing pipes only) a) Above 20 M and upto 30 M 15%, b) Above 30 M 30% (Measurement of overburden is restricted to the depth of casing pipe fixed excluding initial depth of 20M and projection above ground level). 2) A sum of Rs. 100/ is to be deducted for Dry Borewell towards yield test. etc. complete (KPWD SR VOL V for the year 2023 24. I. No. 12.4 P.No. 140 ) No 5552.0 5552.0 1.0 False None None False None False 5552.0 0 4077284 158678 None code113 Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete ) (Above 450m of drilling add 10% for every 50m depth) Borewell depth of 0 to 50 Mtrs (KPWD SR VOL V for the year 2023 24. I. No. 12.1.1 P.No. 132 ) Mtr 388.5 388.5 50.0 False None None False None False 19425.0 0 4077285 158678 None code114 Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete ) (Above 450m of drilling add 10% for every 50m depth) Borewell depth of 50 to 100 Mtrs (KPWD SR VOL V for the year 2023 24. I. No. 12.1.2 P.No. 132 ) Mtr 487.2 487.2 50.0 False None None False None False 24360.0 0 4077286 158678 None code115 Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete ) (Above 450m of drilling add 10% for every 50m depth) Borewell depth of 100 to 150 Mtrs (KPWD SR VOL V for the year 2023 24. I. No. 12.1.3 P.No. 132 ) Mtr 517.65 517.65 10.0 False None None False None False 5176.5 0 4077287 158678 None code116 PVC pipes of 6 Kg/cm2 for 160mm (KPWD SR VOL V for the year 2023 24. Sl No. 649 P.No. A44 ) Mtr 441.0 441.0 6.0 False None None False None False 2646.0 0 4077288 158678 None code117 PVC pipes of 6 Kg/cm2 for 110mm (KPWD SR VOL V for the year 2023 24. Sl No. 647 P.No. A44 ) Mtr 267.75 267.75 110.0 False None None False None False 29452.5 0 4077289 158678 None code118 Providing and laying at site of work MS casing caps as per IS 1239 (part II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum). The dimensions of caps and colars shall be strictly as per IS 1239 (Part II) 1982 with all Amendments including cost of material and labour charges for fixing, if any etc. complete with all lead and lifts and as directed by the Engineer in Charge ( (PWD UGD and water supply SR 2023 24 Volume V Item no.12.34 page no.143) Mtr 172.2 172.2 1.0 False None None False None False 172.2 0 4077290 158678 None code119 Providing, Single Phase Submersible Pump Sets of 100mm dia (4 inch) suitable for bore well confirming to IS 8034 2000 specifications, to work site with testing of as per instructions of engineer incharge of work and latest ammendments 1.50 HP/1.1KW 20 STG (PWD UGD and water supply SR 2023 24 Volume V Item no.13.7.7 page no.150) No 19128.9 19128.9 1.0 False None None False None False 19128.9 0 4077291 158678 None code120 Supply and delivery at site Stringing of heavy duty Naylone/PP rope with ISI etc complete suitable for Single phase Pumpsets. (PWD UGD and water supply SR 2023 24 Volume V Item no.13.31 page no.155) Mtr 42.0 42.0 110.0 False None None False None False 4620.0 0 4077292 158678 None code121 Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well caps, cable clips and water tight gland cable protectors, bolts, nuts, valve and gauges,tools and equipments etc., involved in the job as per specifications, with necessary tests as per specifications, with testing of as per instructions of engineer incharge of work. (PWD UGD and water supply SR 2023 24 Volume V Item no.13.32 page no.156) Job 6825.0 6825.0 1.0 False None None False None False 6825.0 0 4077293 158678 None code122 Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694 1990 with ISI Mark and as per its latest amendments. 1x3x6 Sqm. (PWD UGD and water supply SR 2023 24 Volume V Item no.13.22.4 page no.154) Mtr 194.25 194.25 115.0 False None None False None False 22338.75 0 4077294 158678 None code123 Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984 2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and rolling and lowering into trenches, laying true to line and jointing of pipes and specials with electrofusion welding, giving hydraulic test as per relevant ISS with all lead and lifts including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excation, testing and commissioning. The rate is exclusive of required specials and fittings wherever necessary like saddle Tee, stub ends, flanged sets, bedns, reducers etc. complete (Contractor will make his own arrangements for procuring water for testing) etc. complete. NOTE: Upto 110mm dia Coil shall be used. For :HDPE PE 80 PN 6.0 (PWD UGD and water supply SR 2023 24 Volume V Item no.9.1.1 page no.95) Mtr 198.45 198.45 105.0 False None None False None False 20837.25 0 4077295 158678 None code124 Supply and delivery at site of brand new best make non return valve as per IS 778/1984 with ISI Mark and as per its latest amendments (PWD UGD and water supply SR 2023 24 Volume V Item no.13.25.2 page no.154) No 1627.5 1627.5 1.0 False None None False None False 1627.5 0 4077296 158678 None code125 Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog Voltmeter 1ni with Phase selector switch, Isolating switch OUTGOING for Main Electrical Pump: 1 No. MCB 1 No. DOL of S/D Starter suitable for respective HP 1 No. Electrcal Protection Like single Phase preventor, under voltage over Volage, under current over current & dry run protection suitable for the pump described above 1 no Indoor type NOTE: 1) DOL Direct Online Starter 2) S D Star Delta Starter etc. complete.Upto 3 HP pumps (PWD UGD and water supply SR 2023 24 Volume V Item no.13.24.1 page no.155) Each 7875.0 7875.0 1.0 False None None False None False 7875.0 0 4077297 158678 None code126 Labour charges for erection of outdoor type panel board and meter board units with all necessary materials and labour, tools and equipments including providing cement concrete foundation bed etc., complete as per specification, with testing of as per instructions of engineer incharge of work. (PWD UGD and water supply SR 2023 24 Volume V Item no.13.34 page no.156) Job 1522.5 1522.5 1.0 False None None False None False 1522.5 0 4077298 158678 None code127 Supply and delivery at site best indigenous brand new power capacitor as per IS 2834/1986 with latest amendments with KPTCL authorities and erection, electrification and commissioning of the same at the location of respective pump sets. (PWD UGD and water supply SR 2023 24 Volume V Item no.13.25 page no.155) Kvar 577.5 577.5 1.0 False None None False None False 577.5 0 4077299 158678 None code128 Supply and delivery at site delivery of best indigenous brand new MCB (Miniature Circuit Breakers) of required capacity as per IS 88228/1978 and its latest amendments and with ISI Mark of 6/10/16/20/25/40 Amps with scalable box. (PWD UGD and water supply SR 2023 24 Volume V Item no.13.26 page no.155) No 1207.5 1207.5 1.0 False None None False None False 1207.5 0 4077300 158678 None code129 Labour charges for providing connection using insulated sheathed steel wire cable as per IS 1554/ 1988 with latest amendments from KPTCL pole to meter board unit, with all necessary materials ,tools and equipments,as per specificationswith testing of as per instructions of engineer incharge of work. 3.5 x 16 sqmm (PWD UGD and water supply SR 2023 24 Volume V Item no.13.35.2 page no.156) No 168.0 168.0 1.0 False None None False None False 168.0 0 1727323382000 1 None None Other Works Constrcution of Toilet for Physically disabled peoples in wadi town. 1761941.93 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 4077301 158679 None code01 Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, including removal and disposal of top organic soil not exceeding 150 mm in thickness.(ii) By Mechanical Means using DozerB In area of thorny jungle ha 508.2 508.2 0.5 False None None False None False 254.1 0 4077302 158679 None code02 Earth work in surface excavation for stripping, seating of bund, Road way, by manual means for lowering & leveling the ground for all works other than foundation & depth in all kinds of soil not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, trutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage & other appurtenances required to complete the work. Cum 95.55 95.55 8.64 False None None False None False 825.552 0 4077303 158679 None code03 Earth work excavation by manual means for drains,canals, waste weir draft, approach channels, key trench, foundation of Bridges and such similar works, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, excavated surface leveled and sides neatly dressed disposing off or leveling the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage & other appurtenances required to complete the work.Depth exceeding 1.5m, but not exceeding 3 m Cum 467.25 467.25 50.76 False None None False None False 23717.61 0 4077304 158679 None code04 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates Cum 6288.45 6288.45 6.012 False None None False None False 37806.1614 0 4077305 158679 None code05 Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 6971.11 6971.11 4.788 False None None False None False 33377.67468 0 4077306 158679 None code06 Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) 2.3.2 M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 11566.8 11566.8 1.5264 False None None False None False 17655.56352 0 4077307 158679 None code07 Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) 2.3.2 M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 10206.0 10206.0 1.584 False None None False None False 16166.304 0 4077308 158679 None code08 Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 6708.45 6708.45 9.504 False None None False None False 63757.1088 0 4077309 158679 None code09 Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cost of materials, labour, curing as per specifications and as per directions of Engineer-in-charge. Sqm 267.75 267.75 15.84 False None None False None False 4241.16 0 4077310 158679 None code10 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. Cum 279.3 279.3 44.62 False None None False None False 12462.366 0 4077311 158679 None code11 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. Sqm 1375.5 1375.5 44.28 False None None False None False 60907.14 0 4077312 158679 None code12 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having lock density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. Sqm 1159.2 1159.2 18.9599 False None None False None False 21978.31608 0 4077313 158679 None code13 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates Cum 6527.85 6527.85 0.1 False None None False None False 652.785 0 4077314 158679 None code14 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super lasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) 2.5.1 M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 11138.4 11138.4 1.944 False None None False None False 21653.0496 0 4077315 158679 None code15 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super lasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) 2.5.1 M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 10442.25 10442.25 3.06 False None None False None False 31953.285 0 4077316 158679 None code16 Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 253.05 253.05 24.48 False None None False None False 6194.664 0 4077317 158679 None code17 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) 2.5.1 M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 10442.25 10442.25 1.152 False None None False None False 12029.472 0 4077318 158679 None code18 Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400per rcentage and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6kg per m2 to achieve final DFT (dry film thickness) of 1mm including prime coat of epoxy primer @150 g per m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per pecification & with a 10 years warranty on product & work from certified manufacturers as per the direction of the Engineer In charge. Sqm 857.85 857.85 21.6 False None None False None False 18529.56 0 4077319 158679 None code19 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. Cum 103755.75 103755.75 0.782 False None None False None False 81136.9965 0 4077320 158679 None code20 Providing and fixing in position fully panelled Honne wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. ( excluding cost of fixtures ) Sqm 7816.2 7816.2 8.82 False None None False None False 68938.884 0 4077321 158679 None code21 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings / wooden frames with rawl plugs screws etc. Kg 192.15 192.15 56.7 False None None False None False 10894.905 0 4077322 158679 None code22 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement ortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever equired smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 389.55 389.55 49.86 False None None False None False 19422.963 0 4077323 158679 None code23 Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, uring complete as per specifications and as per directions of Engineer-in-charge. Sqm 253.05 253.05 80.16 False None None False None False 20284.488 0 4077324 158679 None code24 Providing and laying red oxide flooring 40 mm thick, with an under layer of 30mm thick M-15 cement concrete and top layer of 10mm thick plaster with 1:3 cement mortar mixed with red oxide finished with floating coat of neat cement mixed with red oxide ( mix of same proportion ) , including cost of materials, labour, curing, complete as per specifications. Sqm 825.3 825.3 16.64 False None None False None False 13732.992 0 4077325 158679 None code25 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement ortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per m2, including pointing in white cement mixed with pigment of matching shade complete. Sqm 1161.3 1161.3 65.76 False None None False None False 76367.088 0 4077326 158679 None code26 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per pecifications and as per directions of Engineer in charge. Sqm 105.0 105.0 74.34 False None None False None False 7805.7 0 4077327 158679 None code27 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per pecifications and as per directions of Engineer-in-charge. Sqm 133.35 133.35 49.86 False None None False None False 6648.831 0 4077328 158679 None code28 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two coats applied @ 1.43 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to move all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 186.9 186.9 49.86 False None None False None False 9318.834 0 4077329 158679 None code29 Providing White washing with lime to give an even shade :New work (three coats) with lime of approved quality, including cost of materials, labour complete as per specifications and as per directions of Engineerin- charge. Sqm 27.3 27.3 49.86 False None None False None False 1361.178 0 4077330 158679 None code30 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter ncluding preparing the surface even and sand paper smooth, cost of materials, labour complete as per pecifications and as per directions of Engineer-in-charge. Sqm 120.75 120.75 5.4 False None None False None False 652.05 0 4077331 158679 None code31 Supplying, Fitting and Placing TMT Fe 500 & above Reinforcement in Foundation / Substructure Superstructure complete as per Drawing and Technical Specifications. Tonne 90754.65 90754.65 1.542 False None None False None False 139943.6703 0 4077332 158679 None code32 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other ppurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) 2.1.4 Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates Cum 6527.85 6527.85 2.376 False None None False None False 15510.1716 0 4077333 158679 None code33 Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. G.I. pipes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the ngineerin- Charge.) Kg 192.15 192.15 423.36 False None None False None False 81348.624 0 4077334 158679 None code34 Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long brackets of 15x15mm M.S Square tube, the entire door frame to be reinforced with 19x19mm M.S Square tube of 19 gauge. The door frame to be fixed to the wall using M.S. Screws of 65/80mm size complete as per manufacturers specification & direction of Engineer-in-charge Sqm 333.9 333.9 21.42 False None None False None False 7152.138 0 4077335 158679 None code35 Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Prelaminated PVC C Channel of 5mm thick sheet & 30x50mm wide to form stiles & 5mm thick & 75mm wide Prelaminated PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet Prelaminated on either side fitted in the M.S. frame, Sealed to the stiles & rails with PVC Designer beading on either side & joined together with solvent cement adhesive etc., Complete as per anufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75mm Aluminium hinges.12.55.2 -do- with one side prelam Cum 2142.0 2142.0 21.42 False None None False None False 45881.64 0 4077336 158679 None code36 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 100 mm diameter Mtr 305.55 305.55 46.0 False None None False None False 14055.3 0 4077337 158679 None code37 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, if c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20 mm nominal dia pipes Mtr 397.95 397.95 40.0 False None None False None False 15918.0 0 4077338 158679 None code38 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, if c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 32 mm nominal dia pipes Mtr 584.85 584.85 40.0 False None None False None False 23394.0 0 4077339 158679 None code39 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required 14.2.1 W.C. pan with ISI marked white solid plastic seat and lid Each 5079.9 5079.9 6.0 False None None False None False 30479.4 0 4077340 158679 None code40 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : One urinal basin with 5 litre white P.V.C. automatic flushing cistern Each 4676.7 4676.7 4.0 False None None False None False 18706.8 0 4077341 158679 None code41 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: 14.7.1 White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps Each 3236.1 3236.1 4.0 False None None False None False 12944.4 0 4077342 158679 None code42 Providing and fixing brass stop cock of approved quality : 13.3.2 20 mm nominal bore Each 320.25 320.25 8.0 False None None False None False 2562.0 0 4077343 158679 None code43 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 13.5.3 25 mm nominal bore Each 348.6 348.6 4.0 False None None False None False 1394.4 0 4077344 158679 None code44 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS: 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base suooort for tank. Ltr 9.45 9.45 2000.0 False None None False None False 18900.0 0 4077345 158679 None code45 Providing and fixing unplasticised PVC connection pipe with brass unions : 45 cm length 13.8.2.1 15 mm nominal bore No 95.55 95.55 4.0 False None None False None False 382.2 0 4077346 158679 None code46 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. No 1281.0 1281.0 4.0 False None None False None False 5124.0 0 4077347 158679 None code47 Providing and fixing 100 mm sand cast Iron grating for gully trap. Each 49.35 49.35 4.0 False None None False None False 197.4 0 4077348 158679 None code48 Earth work excavation by manual means for drains,canals, waste weir draft, approach channels, key trench, foundation of Bridges and such similar works, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, excavated surface leveled and sides neatly dressed disposing off or leveling the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage & other appurtenances required to complete the work In ordinary/soft rock without blasting upto 1.5 m depth Page No.6 Item No. 1.5.1 KPWD. Volumn -1 DSR 2023-24 Cum 313.95 313.95 434.43 False None None False None False 136389.2985 0 4077349 158679 None code49 Providing Brick work with common burnt clay machine moulded perforated bricks of class designation 3.5 in superstructure above plinth level in cement mortar 1:6 (1 cement : 6 coarse sand) With Non modular bricks including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. Cum 8367.45 8367.45 2.484 False None None False None False 20784.7458 0 4077350 158679 None code50 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1 cement : 3 coarse sand) finished rough with sponge to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 404.25 404.25 37.92 False None None False None False 15329.16 0 4077351 158679 None code51 Providing and laying 100mm thick pre-cast cover slabs over drains & Rain pit of width not exceeding 800 mm using M20 concrete reinforced with Micro Alloyed High carbon steel with 3mm - 3ply wired steel @ 2.00 kg/m2, slabs jointed in CM 1:3 proportion and nicely finished Including providing holes in the Cover slabs wherever necessary for easy drainage of surface water including of labour, materials, scaffolding, usage of machinery, curing, lead and lift charges etc, Complete. itm.no 17.12 Page No.152 KPWD. Volumn -2 DSR 2023-24 Sqm 974.4 974.4 4.1334 False None None False None False 4027.58496 0 4077352 158679 None code52 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe32 mm dia ( item no 14.28.2.1 ) page no 123 PWP. DSR 2023-24 Each 96.6 96.6 4.0 False None None False None False 386.4 0 4077353 158679 None code53 Geophysical investigation at site for sinking borewells for Providing drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical sounding by adopting Venner or Schlumbergers's method, including reconnaissance survey of geological formation. Geophysical investigation of existing ground water in the vicinity, its quality, quantity and acceptability of the users, indicating the location of the site, recommended depth of casing pipe required to seal the top unconsolidated formation including an extra depth of 1.0 metre in consolidated formation for proper seating of casing pipe, depth of drilling required to cover full depth of aquifer proposed to be tapped, probable yield and other information required including transportation of instruments and accessories to work site, engaging technical personal and labour required etc. NOTE: 1) Additional rate on item 1&2 is allowed for drilling in over burden and fixing Casing pipes beyond 20 M (for fixing Casing pipes only) a) Above 20 M and upto 30 M - 15per rcentage, b) Above 30 M - 30per rcentage (Measurement of overburden is restricted to the depth of casing pipe fixed excluding initial depth of 20M and projection above ground level). 2) A sum of Rs. 100/- is to be deducted for Dry Borewell towards yield test. etc. complete (KPWD SR VOL V for the year 2023-24. I. No. 12.4 P.No. 140 ) No 5552.4 5552.4 2.0 False None None False None False 11104.8 0 4077354 158679 None code54 Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete ) (Above 450m of drilling add 10per rcentage for every 50m depth) Borewell depth of 0 to 50 Mtrs (KPWD SR VOL V for the year 2023-24. I. No. 12.1.1 P.No. 132 ) Mtr 388.5 388.5 100.0 False None None False None False 38850.0 0 4077355 158679 None code55 Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete ) (Above 450m of drilling add 10per rcentage for every 50m depth) Borewell depth of 50 to 100 Mtrs (KPWD SR VOL V for the year 2023-24. I. No. 12.1.2 P.No. 132 ) Mtr 487.2 487.2 100.0 False None None False None False 48720.0 0 4077356 158679 None code56 Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete ) (Above 450m of drilling add 10per rcentage for every 50m depth) Borewell depth of 100 to 150 Mtrs (KPWD SR VOL V for the year 2023-24. I. No. 12.1.3 P.No. 132 ) Mtr 517.65 517.65 20.0 False None None False None False 10353.0 0 4077357 158679 None code57 PVC pipes of 6 Kg/cm2 for 160mm (KPWD SR VOL V for the year 2023-24. Sl No. 649 P.No. A44 ) Mtr 441.0 441.0 12.0 False None None False None False 5292.0 0 4077358 158679 None code58 PVC pipes of 6 Kg/cm2 for 110mm (KPWD SR VOL V for the year 2023-24. Sl No. 647 P.No. A44 ) Mtr 267.75 267.75 220.0 False None None False None False 58905.0 0 4077359 158679 None code59 Providing and laying at site of work MS casing caps as per IS 1239 (part-II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum). The dimensions of caps and colars shall be strictly as per IS 1239 (Part-II) 1982 with all Amendments including cost of material and labour charges for fixing, if any etc. complete with all lead and lifts and as directed by the Engineer in Charge ( (PWD UGD and water supply SR 2023-24 Volume - V Item no.12.34 page no.143) Mtr 172.2 172.2 2.0 False None None False None False 344.4 0 4077360 158679 None code60 Providing, Single Phase Submersible Pump Sets of 100mm dia (4 inch) suitable for bore well confirming to IS 8034-2000 specifications, to work site with testing of as per instructions of engineer incharge of work and latest ammendments 1.50 HP/1.1KW 20 STG (PWD UGD and water supply SR 2023-24 Volume - V Item no.13.7.7 page no.150) No 19128.9 19128.9 2.0 False None None False None False 38257.8 0 4077361 158679 None code61 Supply and delivery at site Stringing of heavy duty Naylone/PP rope with ISI etc complete suitable for Single phase Pumpsets. (PWD UGD and water supply SR 2023-24 Volume - V Item no.13.31 page no.155) Mtr 42.0 42.0 220.0 False None None False None False 9240.0 0 4077362 158679 None code62 Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well caps, cable clips and water tight gland cable protectors, bolts, nuts, valve and gauges,tools and equipments etc., involved in the job as per specifications, with necessary tests as per specifications, with testing of as per instructions of engineer incharge of work. (PWD UGD and water supply SR 2023-24 Volume - V Item no.13.32 page no.156) Job 6825.0 6825.0 2.0 False None None False None False 13650.0 0 4077363 158679 None code63 Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendments. 1x3x6 Sqm. (PWD UGD and water supply SR 2023-24 Volume - V Item no.13.22.4 page no.154) Mtr 194.25 194.25 230.0 False None None False None False 44677.5 0 4077364 158679 None code64 Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and rolling and lowering into trenches, laying true to line and jointing of pipes and specials with electrofusion welding, giving hydraulic test as per relevant ISS with all lead and lifts including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excation, testing and commissioning. The rate is exclusive of required specials and fittings wherever necessary like saddle Tee, stub ends, flanged sets, bedns, reducers etc. complete (Contractor will make his own arrangements for procuring water for testing) etc. complete. NOTE: Upto 110mm dia Coil shall be used. For :HDPE PE 80 PN 6.0 (PWD UGD and water supply SR 2023-24 Volume - V Item no.9.1.1 page no.95) Mtr 198.45 198.45 210.0 False None None False None False 41674.5 0 4077365 158679 None code65 Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments (PWD UGD and water supply SR 2023-24 Volume - V Item no.13.25.2 page no.154) No 1627.5 1627.5 2.0 False None None False None False 3255.0 0 4077366 158679 None code66 Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog Voltmeter 1ni with Phase selector switch, Isolating switch OUTGOING for Main Electrical Pump: 1 No. MCB 1 No. DOL of S/D Starter suitable for respective HP 1 No. Electrcal Protection Like single Phase preventor, under voltage over Volage, under current over current & dry run protection suitable for the pump described above 1 no Indoor type NOTE: 1) DOL- Direct Online Starter 2) S-D- Star Delta Starter etc. complete.Upto 3 HP pumps (PWD UGD and water supply SR 2023-24 Volume - V Item no.13.24.1 page no.155) Each 7875.0 7875.0 2.0 False None None False None False 15750.0 0 4077367 158679 None code67 Labour charges for erection of outdoor type panel board and meter board units with all necessary materials and labour, tools and equipments including providing cement concrete foundation bed etc., complete as per specification, with testing of as per instructions of engineer incharge of work. (PWD UGD and water supply SR 2023-24 Volume - V Item no.13.34 page no.156) Job 1522.5 1522.5 2.0 False None None False None False 3045.0 0 4077368 158679 None code68 Supply and delivery at site best indigenous brand new power capacitor as per IS 2834/1986 with latest amendments with KPTCL authorities and erection, electrification and commissioning of the same at the location of respective pump sets. (PWD UGD and water supply SR 2023-24 Volume - V Item no.13.25 page no.155) Kvar 577.5 577.5 2.0 False None None False None False 1155.0 0 4077369 158679 None code69 Supply and delivery at site delivery of best indigenous brand new MCB (Miniature Circuit Breakers) of required capacity as per IS 88228/1978 and its latest amendments and with ISI Mark of 6/10/16/20/25/40 Amps with scalable box. (PWD UGD and water supply SR 2023-24 Volume - V Item no.13.26 page no.155) No 1207.5 1207.5 2.0 False None None False None False 2415.0 0 4077370 158679 None code70 Labour charges for providing connection using insulated sheathed steel wire cable as per IS 1554/ 1988 with latest amendments from KPTCL pole to meter board unit, with all necessary materials ,tools and equipments,as per specificationswith testing of as per instructions of engineer incharge of work. 3.5 x 16 sqmm (PWD UGD and water supply SR 2023-24 Volume - V Item no.13.35.2 page no.156) No 168.0 168.0 2.0 False None None False None False 336.0 0 4077371 158679 None code71 Supplying heavy gauge PVC conduit pipe . dia . mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted wood plugs in case of RCC ceiling and RCC wall/ stone structure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws. 19/20mm dia 2mm thick. Mtr 69.0 69.0 60.0 False None None False None False 4140.0 0 4077372 158679 None code72 Supplying heavy gauge PVC conduit pipe . dia . mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted wood plugs in case of RCC ceiling and RCC wall/ stone structure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws. 25mm dia 2mm thick. Mtr 81.0 81.0 60.0 False None None False None False 4860.0 0 4077373 158679 None code73 Supplying heavy gauge PVC conduit pipe . dia . mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted wood plugs in case of RCC ceiling and RCC wall/ stone structure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws. 32mm dia 2.5mm thick. Mtr 106.0 106.0 60.0 False None None False None False 6360.0 0 4077374 158679 None code74 Supplying heavy gauge PVC Conduit Pipe . dia . mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing Uor J hooks and cement plastering upto the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary. 19/20mm dia 2mm thick Mtr 68.0 68.0 20.0 False None None False None False 1360.0 0 4077375 158679 None code75 Supplying heavy gauge PVC Conduit Pipe . dia . mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing Uor J hooks and cement plastering upto the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary.25mm dia 2mm thick Mtr 79.0 79.0 60.0 False None None False None False 4740.0 0 4077376 158679 None code76 Supplying heavy gauge PVC Conduit Pipe . dia . mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing Uor J hooks and cement plastering upto the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary 32mm dia 2.5mm thick Mtr 99.0 99.0 60.0 False None None False None False 5940.0 0 4077377 158679 None code77 Supplying and fixing of PVC casing and capping on the wall or ceiling using necessary materials like bends, screws at an interval of 300mm …. etc. as required.25mm Mtr 35.0 35.0 50.0 False None None False None False 1750.0 0 4077378 158679 None code78 Supplying And Fixing Metal Fan Box with Round Hook No 160.0 160.0 4.0 False None None False None False 640.0 0 4077379 158679 None code79 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, ultistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 2.3.2 1.5 mm2 Mtr 26.0 26.0 60.0 False None None False None False 1560.0 0 4077380 158679 None code80 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, ultistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments.2.3.3 2.5 mm2 Mtr 42.0 42.0 60.0 False None None False None False 2520.0 0 4077381 158679 None code81 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, ultistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 2.3.4 4 mm2 Mtr 63.0 63.0 60.0 False None None False None False 3780.0 0 4077382 158679 None code82 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, ultistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments.2.3.5 6 mm2 Mtr 92.0 92.0 60.0 False None None False None False 5520.0 0 4077383 158679 None code83 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, ultistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments 2.3.6 10 mm2 Mtr 167.0 167.0 60.0 False None None False None False 10020.0 0 4077384 158679 None code84 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 3.4.1 1-3 Way Each 138.0 138.0 2.0 False None None False None False 276.0 0 4077385 158679 None code85 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 3.4.3 6 Way Each 177.0 177.0 2.0 False None None False None False 354.0 0 4077386 158679 None code86 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 3.4.4 8 Way Each 220.0 220.0 2.0 False None None False None False 440.0 0 4077387 158679 None code87 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 3.4.5 10-12 Way Each 261.0 261.0 2.0 False None None False None False 522.0 0 4077388 158679 None code88 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 3.5.1 1 to 3 Module Each 127.0 127.0 2.0 False None None False None False 254.0 0 4077389 158679 None code89 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 3.5.3 6 Module Each 175.0 175.0 2.0 False None None False None False 350.0 0 4077390 158679 None code90 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 3.5.4 8 Module Each 234.0 234.0 2.0 False None None False None False 468.0 0 4077391 158679 None code91 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 3.5.5 10-12 Module Each 284.0 284.0 2.0 False None None False None False 568.0 0 4077392 158679 None code92 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 3.6.1 6A One Way Switch Each 102.0 102.0 2.0 False None None False None False 204.0 0 4077393 158679 None code93 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 3.6.3 6A Three Way socket Each 171.0 171.0 2.0 False None None False None False 342.0 0 4077394 158679 None code94 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 3.6.8 16A One Way Switch Each 177.0 177.0 2.0 False None None False None False 354.0 0 4077395 158679 None code95 Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase / 3 phase / single door with powder coated painting. Made out of 14 SWG MS enclosure. II - Double Door 5.18.6 4 Way SP & N Each 1368.0 1368.0 2.0 False None None False None False 2736.0 0 4077396 158679 None code96 Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase / 3 phase / single door with powder coated painting. Made out of 14 SWG MS enclosure. II - Double Door 5.18.7 6 Way SP & N Each 1102.0 1102.0 2.0 False None None False None False 2204.0 0 4077397 158679 None code97 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 5.17.1 6-32 A SP Each 415.0 415.0 2.0 False None None False None False 830.0 0 4077398 158679 None code98 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 5.17.7 6-32 A TPN Each 1717.0 1717.0 2.0 False None None False None False 3434.0 0 4077399 158679 None code99 Supplying and fixing of Metal Socket set of 2pole and earth plugs and socket for incorporating SP and TP MCB (Without MCB ). The entire plug and socket shall be mounted in a thermoplastic / powder coated metal box & wired Completely. SP & N SP & N 5.45.2 20 A Each 971.0 971.0 2.0 False None None False None False 1942.0 0 4077400 158679 None code100 Supplying and fixing of Metal Socket set of 2pole and earth plugs and socket for incorporating SP and TP MCB (Without MCB ). The entire plug and socket shall be mounted in a thermoplastic / powder coated metal box & wired Completely. SP & N TP & N 5.45.3 20 A Each 1340.0 1340.0 4.0 False None None False None False 5360.0 0 4077401 158679 None code101 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part- 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 32.11 50 Sqmm, 3.5 Core, (16 GI Strips - 4 x 0.8 mm) Km 178973.0 178973.0 0.04 False None None False None False 7158.92 0 4077402 158679 None code102 Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff LT Cable 1.06 35 to 95 Sqmm Km 31139.0 31139.0 0.1 False None None False None False 3113.9 0 4077403 158679 None code103 Earth work excavation for cable trench of 0.5 to 0.75 Mtr. Width and Depth upto 1 Mtr including trial pits, depositing on bank upto a lead of 50 Mtr, Supplying and Displaying necessary Danger Boards and Lighting, Using sight Rails and Sign Boards at every 100 Mtr wherever necessary as directed. 29.03 In Hard Soil Cum 389.0 389.0 14.0 False None None False None False 5446.0 0 4077404 158679 None code104 Refilling the cable trenches with selected available earth from trench excavation including watering, consolidation in layers of 15 cm. Thickness including depositing of the surplus earth with a lead of 200 Mtr Cum 58.0 58.0 14.0 False None None False None False 812.0 0 4077405 158679 None code105 LED Indoor Supplying of .feet -PVC Batten with integrated LED tube . W with high quality diffuser with Life of 25000 burning hours & 70per rcentage lumen maintenance with CRI Greater then 80. Power Input: 220-240V@ 50/60Hz & Power factor Greater then0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. 11.3.3 LED light fitting 1 x 4' - 36/40 W Each 1269.0 1269.0 4.0 False None None False None False 5076.0 0 4077406 158679 None code108 Supply of round/square recess/surface mounted rolling type LED Down light with . W GU 10 LED Lamp Rib Fabricated from diecast aluminium with white powder coated prewired to mains connector & has swivelling unit of aluminium die cast eye ball & LED Lamp position retained by circular wire spring, with Life of 25000 burning hours & 70per rcentage lumen maintenance with CRI Greater then 80. Power Input: 220-240V @50/60Hz & Power factor Greater then0.9 along with CE approved. 2years Warranty against any manufacturing defect working under standard electrical condition. 11.5.3 LED square or round down light 15-18W Each 1324.0 1324.0 6.0 False None None False None False 7944.0 0 1727323382000 1 None None Other Works Developemtn of Sevalal temple in ward no 4 in wadi town. 2113916.37 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 4077407 158680 None code01 Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including TandP and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead By Mechanical means Dismantling Brick / Tile work / rubble masonry / pitching / etc by mechanical means Cum 189.0 189.0 4.8 False None None False None False 907.2 0 4077408 158680 None code02 Earth work excavation by manual means for drains,canals, waste weir draft, approach channels, key trench, foundation of Bridges and such similar works, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, excavated surface leveled and sides neatly dressed disposing off or leveling the excavated stuff or sorting and stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage and other appurtenances required to complete the work.Depth exceeding 1.5m, but not exceeding 3 m Cum 467.25 467.25 51.84 False None None False None False 24222.24 0 4077409 158680 None code03 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead and lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement and formwork shall be paid separately) Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates Cum 6288.45 6288.45 2.59 False None None False None False 16287.0855 0 4077410 158680 None code04 Providing and laying in Reinforced cement concrete for all Basement and surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead and lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement and formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 7170.28 7170.28 9.8 False None None False None False 70268.744 0 4077411 158680 None code05 Providing and laying in Reinforced cement concrete for all Basement and surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead and lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement and formwork to be paid separately) 2.3.2 M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 11566.8 11566.8 4.195 False None None False None False 48522.726 0 4077412 158680 None code06 Providing and laying in Reinforced cement concrete for all Basement and surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead and lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement and formwork to be paid separately) 2.3.2 M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 10886.4 10886.4 0.4623 False None None False None False 5032.78272 0 4077413 158680 None code07 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. Cum 279.3 279.3 39.45 False None None False None False 11018.385 0 4077414 158680 None code08 Supplying, Fitting and Placing TMT Fe 500 and above Reinforcement in Foundation / Substructure Superstructure complete as per Drawing and Technical Specifications. Tonne 90754.65 90754.65 1.02 False None None False None False 92569.743 0 4077415 158680 None code09 Providing and fixing self supported, ribbed. high quality, high grade (D:350 MPA Yst Min ), pre painted Galvalume steel roof sheet, coated with bare Galvalume coating AZ 150, at the rate 150 gms/Smtr 55PercentageAL.45PercentageZri) by hot qip process, of total coated thickness as specified for different spans with atolerance of 0.02 mm, according to technical specification confirming to A 792, with NCCA 11 1, or ECCA T 4 Pencil hardness Ha, NCCA standard Sqm 1365.0 1365.0 116.58 False None None False None False 159131.7 0 4077416 158680 None code10 Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished seamless type tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer in Charge. Sqm 142.8 142.8 582.9 False None None False None False 83238.12 0 4077417 158680 None code11 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery and other incidental charges complete as per the direction of engineer incharge of work. Cum 8376.9 8376.9 13.565 False None None False None False 113632.6485 0 4077418 158680 None code12 Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished seamless type tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer in Charge. Kg 154.35 154.35 508.714 False None None False None False 78520.0059 0 4077419 158680 None code13 Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including cost of materials, labour, usage charges of machinery complete as per specifications and as per irections of the Engineer in Charge. Kg 142.8 142.8 126.0 False None None False None False 17992.8 0 4077420 158680 None code14 Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, uring complete as per specifications and as per directions of Engineer in charge. Sqm 253.05 253.05 277.1124 False None None False None False 70123.29282 0 4077421 158680 None code15 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement ortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever equired smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer in charge. Sqm 389.55 389.55 60.1319 False None None False None False 23424.381645 0 4077422 158680 None code16 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead and lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars and formwork to be paid separately) 2.5.1 M20 Design Mix Using 20 mm ominal size graded crushed coarse aggregates Sqm 11138.4 11138.4 5.2916 False None None False None False 58939.95744 0 4077423 158680 None code17 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per pecifications and as per directions of Engineer in charge. Sqm 105.0 105.0 277.1124 False None None False None False 29096.802 0 4077424 158680 None code18 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per pecifications and as per directions of Engineer in charge. Sqm 133.35 133.35 277.1124 False None None False None False 36952.93854 0 4077425 158680 None code19 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two coats applied at the rate 1.43 ltr/10 m² over and including priming coat of exterior primer applied at the rate 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to move all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer in charge. Sqm 186.9 186.9 60.131 False None None False None False 11238.4839 0 4077426 158680 None code20 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter ncluding preparing the surface even and sand paper smooth, cost of materials, labour complete as per pecifications and as per directions of Engineer in charge. Sqm 120.75 120.75 1027.5 False None None False None False 124070.625 0 4077427 158680 None code21 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer in charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer in Charge. Mtr 593.25 593.25 25.578 False None None False None False 15174.1485 0 4077428 158680 None code22 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer in Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry at the rate 3.3kg per m2, including pointing in white cement mixed with pigment of matching shade complete. Sqm 1161.3 1161.3 126.0 False None None False None False 146323.8 0 4077429 158680 None code23 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead and lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement and formwork shall be paid separately) Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates Sqm 6288.45 6288.45 16.3125 False None None False None False 102580.340625 0 4077430 158680 None code24 Toilet Block Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, including removal and disposal of top organic soil not exceeding 150 mm in thickness.(ii) By Mechanical Means using DozerB In area of thorny jungle Sqm 508.2 508.2 0.25 False None None False None False 127.05 0 4077431 158680 None code25 Earth work in surface excavation for stripping, seating of bund, Road way, by manual means for lowering and leveling the ground for all works other than foundation and depth in all kinds of soil not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, trutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting and stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage and other appurtenances required to complete the work. Cum 95.55 95.55 4.32 False None None False None False 412.776 0 4077432 158680 None code26 Earth work excavation by manual means for drains,canals, waste weir draft, approach channels, key trench, foundation of Bridges and such similar works, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, excavated surface leveled and sides neatly dressed disposing off or leveling the excavated stuff or sorting and stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage and other appurtenances required to complete the work.Depth exceeding 1.5m, but not exceeding 3 m Cum 467.25 467.25 25.38 False None None False None False 11858.805 0 4077433 158680 None code27 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead and lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement and formwork shall be paid separately) Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates Cum 6288.45 6288.45 3.0 False None None False None False 18865.35 0 4077434 158680 None code28 Providing and laying in Reinforced cement concrete for all Basement and surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead and lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement and formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 7348.32 7348.32 2.394 False None None False None False 17591.87808 0 4077435 158680 None code29 Providing and laying in Reinforced cement concrete for all Basement and surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead and lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement and formwork to be paid separately) 2.3.2 M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 11566.8 11566.8 0.7632 False None None False None False 8827.78176 0 4077436 158680 None code30 Providing and laying in Reinforced cement concrete for all Basement and surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead and lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement and formwork to be paid separately) 2.3.2 M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 10886.4 10886.4 0.792 False None None False None False 8622.0288 0 4077437 158680 None code31 Providing Size Stone masonry with hard stone in foundation and plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 6708.45 6708.45 4.752 False None None False None False 31878.5544 0 4077438 158680 None code32 Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cost of materials, labour, curing as per specifications and as per directions of Engineer in charge. Sqm 267.75 267.75 7.92 False None None False None False 2120.58 0 4077439 158680 None code33 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. Cum 279.3 279.3 22.31 False None None False None False 6231.183 0 4077440 158680 None code34 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part I) 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. Sqm 1375.5 1375.5 22.14 False None None False None False 30453.57 0 4077441 158680 None code35 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having lock density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part I) 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. Sqm 1159.2 1159.2 9.47 False None None False None False 10977.624 0 4077442 158680 None code36 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead and lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement and formwork shall be paid separately) Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates Cum 6288.45 6288.45 0.045 False None None False None False 282.98025 0 4077443 158680 None code37 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super lasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead and lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars and formwork to be paid separately) 2.5.1 M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 11138.4 11138.4 0.97 False None None False None False 10804.248 0 4077444 158680 None code38 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super lasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead and lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars and formwork to be paid separately) 2.5.1 M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 11138.4 11138.4 1.224 False None None False None False 13633.4016 0 4077445 158680 None code39 Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer in charge. Sqm 253.05 253.05 12.24 False None None False None False 3097.332 0 4077446 158680 None code40 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead and lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars and formwork to be paid separately) 2.5.1 M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 11138.4 11138.4 0.432 False None None False None False 4811.7888 0 4077447 158680 None code41 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as specidfication and as per directionsof Engineer in charge Sqm 11138.4 11138.4 0.43 False None None False None False 4789.512 0 4077448 158680 None code42 Providing and fixing factory made UPVC Door Frame made of UPVC extruded sections having an overall dimension as below (tolerance +/ 1mm ) with wall thickness 2.00mm (+/ 2mm), corners of the door frames to be jointed with galvanised brackets and stainless steel screws,joints mitred and plastic welded. The hinge side vertical of the frames reinforced by galvanised MS Tube of size 19mm X 19mm and 1mm (+/ 1mm) wall thickness and 3 Nos stainless steel hinges fixed to the frame complete as per manufacturer specification and direction of Engineer in charge. Sqm 250.95 250.95 21.0 False None None False None False 5269.95 0 4077449 158680 None code43 Providing and fixing of openable Door made out of multi chambered UPVC (matching to RAL 9016) sections and with minimum Ti02 (Titanium Doxide) at 6PHR with TPV (Thermo Plastic Vulcanised) and lead free with gasket grey color having isolated drainage and reinforced with Galvanised Iron profile through out the openable frame. The frame having overall size of 60mm X 55mm with GI reinforcement of 1mm thickness and openable sash with overall size of 60mm X 102mm and GI reinforcement of 2mm thickness. Coextruded Glazing bead for fixing of glass shall be of size 20mm X 34mm. Windows shall be provided with 6mm plain float glass, Standard hardware with 2D/3D hinge and multi point locking system with handle. Wall thickness of frame and sash shall be of 2mm 2.50mm. Maximum possible size 900mm X 2400mm. (The cost is inclusive of all fixtures and separate charge for minor TandP's shall not be made) Sqm 6557.25 6557.25 10.71 False None None False None False 70228.1475 0 4077450 158680 None code44 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings / wooden frames with rawl plugs screws etc. Kg 192.15 192.15 28.35 False None None False None False 5447.4525 0 4077451 158680 None code45 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement ortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever equired smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer in charge. Sqm 389.55 389.55 24.93 False None None False None False 9711.4815 0 4077452 158680 None code46 Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, uring complete as per specifications and as per directions of Engineer in charge. Sqm 253.05 253.05 40.08 False None None False None False 10142.244 0 4077453 158680 None code47 Providing and laying red oxide flooring 40 mm thick, with an under layer of 30mm thick M 15 cement concrete and top layer of 10mm thick plaster with 1:3 cement mortar mixed with red oxide finished with floating coat of neat cement mixed with red oxide ( mix of same proportion ) , including Cost of materials, labour, curing, complete as per specifications. Sqm 825.3 825.3 8.32 False None None False None False 6866.496 0 4077454 158680 None code48 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer in Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement ortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry at the rate 3.3kg per m2, including pointing in white cement mixed with pigment of matching shade complete. Sqm 1161.3 1161.3 18.68 False None None False None False 21693.084 0 4077455 158680 None code49 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per pecifications and as per directions of Engineer in charge. Sqm 105.0 105.0 37.17 False None None False None False 3902.85 0 4077456 158680 None code50 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per pecifications and as per directions of Engineer in charge. Sqm 133.35 133.35 24.93 False None None False None False 3324.4155 0 4077457 158680 None code51 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two coats applied at the rate 1.43 ltr/10 m² over and including priming coat of exterior primer applied at the rate 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to move all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer in charge. Sqm 186.9 186.9 24.93 False None None False None False 4659.417 0 4077458 158680 None code52 Providing White washing with lime to give an even shade :New work (three coats) with lime of approved quality, including cost of materials, labour complete as per specifications and as per directions of Engineerin charge. Sqm 27.3 27.3 24.93 False None None False None False 680.589 0 4077459 158680 None code53 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter ncluding preparing the surface even and sand paper smooth, cost of materials, labour complete as per pecifications and as per directions of Engineer in charge. Sqm 120.75 120.75 2.7 False None None False None False 326.025 0 4077460 158680 None code54 Supplying, Fitting and Placing TMT Fe 500 and above Reinforcement in Foundation / Substructure Superstructure complete as per Drawing and Technical Specifications. Tonne 90754.65 90754.65 0.74 False None None False None False 67158.441 0 4077461 158680 None code55 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead and lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other ppurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement and formwork shall be paid separately) 2.1.4 Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates Cum 6527.85 6527.85 1.188 False None None False None False 7755.0858 0 4077462 158680 None code56 Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. G.I. pipes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the ngineerin Charge.) Kg 192.15 192.15 211.68 False None None False None False 40674.312 0 4077463 158680 None code57 Providing and fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners and jointed 2 No.s of 150mm long brackets of 15x15mm M.S Square tube, the entire door frame to be reinforced with 19x19mm M.S Square tube of 19 gauge. The door frame to be fixed to the wall using M.S. Screws of 65/80mm size complete as per manufacturers specification and direction of Engineer in charge Sqm 333.9 333.9 10.71 False None None False None False 3576.069 0 4077464 158680 None code58 Providing and fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top and bottom rails, covered with heat moulded Prelaminated PVC C Channel of 5mm thick sheet and 30x50mm wide to form stiles and 5mm thick and 75mm wide Prelaminated PVC Sheets for top rail, lock rail and bottom rail on either side and 5mm thick, 20mm wide cross PVC sheet as gap insert for top rail and bottom rail, Panelling of 5mm thick PVC sheet Prelaminated on either side fitted in the M.S. frame, Sealed to the stiles and rails with PVC Designer beading on either side and joined together with solvent cement adhesive etc., Complete as per anufacturers specification and direction of Engineer in charge fixed to frames with 3 nos of 75mm Aluminium hinges.12.55.2 do with one side prelam Cum 2142.0 2142.0 10.71 False None None False None False 22940.82 0 4077465 158680 None code59 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 100 mm diameter Mtr 305.55 305.55 30.0 False None None False None False 9166.5 0 4077466 158680 None code60 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, if c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20 mm nominal dia pipes Mtr 397.95 397.95 15.0 False None None False None False 5969.25 0 4077467 158680 None code61 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, if c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 32 mm nominal dia pipes Mtr 584.85 584.85 15.0 False None None False None False 8772.75 0 4077468 158680 None code62 Providing and fixing Water Closet squatting pan (Indian type W.C. Pan) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. Pan of size 580x440 mm with integral type foot rests Each 5128.2 5128.2 2.0 False None None False None False 10256.4 0 4077469 158680 None code63 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: 14.7.1 White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps Each 3236.1 3236.1 2.0 False None None False None False 6472.2 0 4077470 158680 None code64 Providing and fixing brass stop cock of approved quality : 13.3.2 20 mm nominal bore Each 320.25 320.25 5.0 False None None False None False 1601.25 0 4077471 158680 None code65 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 13.5.3 25 mm nominal bore Each 348.6 348.6 3.0 False None None False None False 1045.8 0 4077472 158680 None code66 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS: 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base suooort for tank. Ltr 9.45 9.45 1000.0 False None None False None False 9450.0 0 4077473 158680 None code67 Providing and fixing unplasticised PVC connection pipe with brass unions : 45 cm length 13.8.2.1 15 mm nominal bore No 95.55 95.55 3.0 False None None False None False 286.65 0 4077474 158680 None code68 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. No 1281.0 1281.0 2.0 False None None False None False 2562.0 0 4077475 158680 None code69 Providing and fixing 100 mm sand cast Iron grating for gully trap. Each 49.35 49.35 2.0 False None None False None False 98.7 0 4077476 158680 None code70 Earth work excavation by manual means for drains,canals, waste weir draft, approach channels, key trench, foundation of Bridges and such similar works, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, excavated surface leveled and sides neatly dressed disposing off or leveling the excavated stuff or sorting and stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage and other appurtenances required to complete the work In ordinary/soft rock without blasting upto 1.5 m depth Page No.6 Item No. 1.5.1 KPWD. Volumn 1 DSR 2021 22 Cum 313.95 313.95 217.215 False None None False None False 68194.64925 0 4077477 158680 None code71 Providing Brick work with common burnt clay machine moulded perforated bricks of class designation 3.5 in superstructure above plinth level in cement mortar 1:6 (1 cement : 6 coarse sand) With Non modular bricks including cost of all materials, labour, scaffolding and usage charges of machinery and other incidental charges complete as per the direction of engineer incharge of work. Cum 8367.45 8367.45 1.242 False None None False None False 10392.3729 0 4077478 158680 None code72 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1 cement : 3 coarse sand) finished rough with sponge to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer in charge. Sqm 404.25 404.25 18.96 False None None False None False 7664.58 0 4077479 158680 None code73 Providing and laying 100mm thick pre cast cover slabs over drains and Rain pit of width not exceeding 800 mm using M20 concrete reinforced with Micro Alloyed High carbon steel with 3mm 3ply wired steel at the rate 2.00 kg/m2, slabs jointed in CM 1:3 proportion and nicely finished Including providing holes in the Cover slabs wherever necessary for easy drainage of surface water including of labour, materials, scaffolding, usage of machinery, curing, lead and lift charges etc, Complete. itm.no 17.12 Page No.152 KPWD. Volumn 2 DSR 2023 24 Sqm 974.4 974.4 2.0667 False None None False None False 2013.79248 0 4077480 158680 None code74 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe32 mm dia ( item no 14.28.2.1 ) page no 123 PWP. DSR 2021 22 Each 96.6 96.6 2.0 False None None False None False 193.2 0 4077481 158680 None code75 Electrical Work Supplying heavy gauge PVC conduit pipe . dia . mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted wood plugs in case of RCC ceiling and RCC wall/ stone structure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws. 19/20mm dia 2mm thick. Mtr 69.0 69.0 46.0 False None None False None False 3174.0 0 4077482 158680 None code76 Supplying heavy gauge PVC conduit pipe . dia . mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted wood plugs in case of RCC ceiling and RCC wall/ stone structure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws. 25mm dia 2mm thick. Mtr 81.0 81.0 46.0 False None None False None False 3726.0 0 4077483 158680 None code77 Supplying heavy gauge PVC conduit pipe . dia . mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted wood plugs in case of RCC ceiling and RCC wall/ stone structure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws. 32mm dia 2.5mm thick. Mtr 100.0 100.0 46.0 False None None False None False 4600.0 0 4077484 158680 None code78 Supplying heavy gauge PVC Conduit Pipe . dia . mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing Uor J hooks and cement plastering upto the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary. 19/20mm dia 2mm thick Mtr 68.0 68.0 46.0 False None None False None False 3128.0 0 4077485 158680 None code79 Supplying heavy gauge PVC Conduit Pipe . dia . mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing Uor J hooks and cement plastering upto the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary.25mm dia 2mm thick Mtr 79.0 79.0 46.0 False None None False None False 3634.0 0 4077486 158680 None code80 Supplying heavy gauge PVC Conduit Pipe . dia . mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing Uor J hooks and cement plastering upto the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary 32mm dia 2.5mm thick Mtr 99.0 99.0 60.0 False None None False None False 5940.0 0 4077487 158680 None code81 Supplying and fixing of PVC casing and capping on the wall or ceiling using necessary materials like bends, screws at an interval of 300mm …. etc. as required. 25mm Mtr 35.0 35.0 90.0 False None None False None False 3150.0 0 4077488 158680 None code82 Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit / casing capping using 1100V grade, COPPER conductor flexible multistrand FRLS PVC insulated, 2X1.5Sq.mm Cable confirming to the GTP without switch, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block complete for each outlet. Short point upto 3m from tapping point to out let via switch box Point 269.0 269.0 6.0 False None None False None False 1614.0 0 4077489 158680 None code83 Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit / casing capping using 1100V grade, COPPER conductor flexible multistrand FRLS PVC insulated, 2X1.5Sq.mm Cable confirming to the GTP without switch, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block complete for each outlet. Medium point above 3m upto 6m from tapping point to out let via switch box Point 379.0 379.0 5.0 False None None False None False 1895.0 0 4077490 158680 None code84 Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit / casing capping using 1100V grade, COPPER conductor flexible multistrand FRLS PVC insulated, 2X1.5Sq.mm Cable confirming to the GTP without switch, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block complete for each outlet. Long point above 6m upto 10m from tapping point to out let via switch box Point 555.0 555.0 5.0 False None None False None False 2775.0 0 4077491 158680 None code85 Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit / casing capping using 1100V grade, COPPER conductor flexible multistrand FRLS PVC insulated, 2X1.5Sq.mm Cable confirming to the GTP without switch, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block complete for each outlet. Two outlet in a row, above 3m upto 6m from tapping point to out let via switches Point 677.0 677.0 5.0 False None None False None False 3385.0 0 4077492 158680 None code86 Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit / casing capping using 1100V grade, COPPER conductor flexible multistrand FRLS PVC insulated, 2X1.5Sq.mm Cable confirming to the GTP without switch, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block complete for each outlet. Three outlet in a row, above 6m upto 10m from tapping point to out let via switches box Point 989.0 989.0 4.0 False None None False None False 3956.0 0 4077493 158680 None code87 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, ultistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS 694:confirming to latest amendments. 1.5 mm2 Mtr 26.0 26.0 70.0 False None None False None False 1820.0 0 4077494 158680 None code88 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, ultistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS 694:confirming to latest amendments.2.5 mm2 Mtr 42.0 42.0 60.0 False None None False None False 2520.0 0 4077495 158680 None code89 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, ultistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS 694:confirming to latest amendments. 4 mm2 Mtr 63.0 63.0 60.0 False None None False None False 3780.0 0 4077496 158680 None code90 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, ultistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS 694:confirming to latest amendments.6 mm2 Mtr 87.0 87.0 60.0 False None None False None False 5220.0 0 4077497 158680 None code91 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, ultistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS 694:confirming to latest amendments 10 mm2 Mtr 167.0 167.0 40.0 False None None False None False 6680.0 0 4077498 158680 None code92 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 3 Way Each 159.0 159.0 8.0 False None None False None False 1272.0 0 4077499 158680 None code93 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 6 Way Each 220.0 220.0 6.0 False None None False None False 1320.0 0 4077500 158680 None code94 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 3 Module Each 161.0 161.0 5.0 False None None False None False 805.0 0 4077501 158680 None code95 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 6 Module Each 234.0 234.0 4.0 False None None False None False 936.0 0 4077502 158680 None code96 LED Indoor Supplying of .feet PVC Batten with integrated LED tube . W with high quality diffuser with Life of 25000 burning hours and 70Percentage lumen maintenance with CRI Smaller than 80. Power Input: 220 240Vat the rate 50/60Hz and Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. LED light fitting 1 x 4 36/40 W Each 1269.0 1269.0 4.0 False None None False None False 5076.0 0 4077503 158680 None code97 Supply of round/square recess/surface mounted rolling type LED Down light with . W GU 10 LED Lamp Rib Fabricated from diecast aluminium with white powder coated prewired to mains connector and has swivelling unit of aluminium die cast eye ball and LED Lamp position retained by circular wire spring, with Life of 25000 burning hours and 70Percentage lumen maintenance with CRI Smaller than 80. Power Input: 220 240V at the rate50/60Hz and Power factor Smaller than0.9 along with CE approved. 2years Warranty against any manufacturing defect working under standard electrical condition. LED square or round down light 15 18W Each 1324.0 1324.0 6.0 False None None False None False 7944.0 0 4077504 158680 None code98 LED Down light Supplying of recess mounting non integrated type LED down light. W luminaire comprising of pressure decast/ extruded aluminium housing, with spring loaded false ceiling clA, LED of Power/COB with CCT 6500 degree K, CRISmaller than 70Percentage. efficacy Smaller than100 lumen per W, 120degree beam spread, lifeSmaller than 25000 burning hours and Compliance to IS10322/IEC 60598, LM 79 and LM 80. The lamp compartment is enclosed with anti glare opal diffuser which enhances the lighting level. LED's are driven by HF electronic driver integrated in a separate control gear assembly., with PF Smaller than 0.95, power loss shouldGreater then 5Percentage of lamp Wage, short circuit and open circuit protection to be integrated in the circuit, THD less than 20Percentage, Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL/CPRI accredited aboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition.15 18W Each 1671.0 1671.0 10.0 False None None False None False 16710.0 0 4077505 158680 None code99 Supplying and fixing of round or oblong type bulk head fitting glass cover Each 68.0 68.0 6.0 False None None False None False 408.0 0 4077506 158680 None code100 Fixing all types and all capacities fluorescent/false ceiling/spot light/ CFL fittings indoor on the wall/ ceiling/rafters/girders using 23/0.0076'' twin PVC insulated wires, required nos of round blocks and clamps (if required) On wall/ ceiling / Rafter / Girders Each 122.0 122.0 10.0 False None None False None False 1220.0 0 4077507 158680 None code101 Fixing a ceiling/wall mounting fan of all capacities and all types with necessary clamps and S hook made out of 15mm dia MS rod, with 5 amps ceiling rose of approved quality with necessary length of 23/0.0076 inch PVC insulated twin twisted wire of approved quality mounted on a suitable size wooden board and wired complete. Each 315.0 315.0 4.0 False None None False None False 1260.0 0 4077508 158680 None code102 Fixing one exhaust fan after making a suitable nitch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 amps, ceiling rose with sufficient length of 23 / 0.0076 inch PVC insulated twin core wire of approved make with wire mesh and wooden frame. Each 707.0 707.0 4.0 False None None False None False 2828.0 0 4077509 158680 None code103 Supplying . amps rated 3phase with neutral bus bar using required capacity electrolytic aluminum strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete. 100 A 4 x 30 x 6 mm Aluminium Strips Mtr 2465.0 2465.0 2.0 False None None False None False 4930.0 0 4077510 158680 None code104 Supplying and fixing angle iron frame work fabricated out of M.S. angle iron. and M.S. flat … with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. 40 x 40 x 6 mm Mtr 305.0 305.0 5.0 False None None False None False 1525.0 0 4077511 158680 None code105 Supplying and fixing angle iron frame work fabricated out of M.S. angle iron. and M.S. flat … with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. 50 x 100 x 50 x 6 mm C channel Mtr 680.0 680.0 6.0 False None None False None False 4080.0 0 4077512 158680 None code106 Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuit in Thermal Magnetic Release. Micro processor release shall have Earth Fault as per IS 13947. (Icu=100Percentage lcs). In 4P MCCB, all Poles should have protection for Short Cicrcuit/Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non Priority loads must be available in the MCCB. MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism. THREE Pole 100 A 25 kA Each 6086.0 6086.0 4.0 False None None False None False 24344.0 0 4077513 158680 None code107 Supplying, fixing and wiring Residual current circuit breaker (RCCB)240/450V upto 300mA sensitivity on existing wood/ panel board. 32 40 A 4 pole Each 5147.0 5147.0 2.0 False None None False None False 10294.0 0 4077514 158680 None code108 Supplying and fixing of Shunt trip suitable for MCCB.CBCT. Each 1703.0 1703.0 2.0 False None None False None False 3406.0 0 4077515 158680 None code109 Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of percentage leakage current, programmable delay/auto/ manual reset facility suitable to mount on DIN rail/ flush mounting on panel board. Each 9255.0 9255.0 1.0 False None None False None False 9255.0 0 4077516 158680 None code110 Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C. Each 515.0 515.0 2.0 False None None False None False 1030.0 0 4077517 158680 None code111 Supplying, fixing and wiring 50/5 to 400/5A 5VA burden Current Transformer Class 0.5 accuracy with Tape Wound. Each 562.0 562.0 2.0 False None None False None False 1124.0 0
generalCriterionList	createdTs version createdDate modifiedDate criterionType description tenderEligibilityCriterionDocumentList 1727323382000 0 None None ELIGIBILITY Tenders from Joint ventures are not acceptable. None 1727323382000 0 None None ELIGIBILITY Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka None 1727323382000 0 None None ELIGIBILITY Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document. None
preQualCriterionList	None
technicalCriterionList	createdTs version createdDate modifiedDate description criterionCategoryText criterionTypeOthersValue tenderTechnicalCriterionDocumentList None None None None Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction) None None None None None None Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year None None None None None None Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year None None None None None None Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx) None None None None None None Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period) None None None None None None Total value of civl engineering works executed and payments received in the last five years (year-wise) None None None None None None List of existing commitments and ongoing works None None None None None None List of works for which tenders already submitted None None None None None None Banker Details for reference None None None None None None Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded None None None None None None Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years None None None None None None Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded None None None None None None List of Financial Resources with Certificates None None None None None None Minimum financial turnover (Civil engineering construction works) not less than two time the annual payments from the contract (Rs.95.85 Lakhs) Others Minimum financial turnover createdTs version createdDate modifiedDate documentName None None None None Others -- Minimum financial turnover None None None None Satisfactorily completed (atleast 90%) as prime contractor at-least one similat work of vale not less then Rs. 76.68 Lakhs(80% of the estimated cost of tender) Others Satisfactorily completed ( createdTs version createdDate modifiedDate documentName None None None None Others -- Satisfactorily completed
tenderCriterionDocumentList	documentName optional documentTypeText To qualify for award of this contract each tenderer in his name should have in the last five years period achieved in the last two years at least two financial years an average annual financial turnover of Rs.95.85 Lakhs. True Technical Bid Eligible Registered PWD Contractor. True Technical Bid Similar Nature of Work Done Certificate achieved at least 50 Percent of Estimate Cost 47.92 Lakhs. True Technical Bid IT return Certificate Last 3 years. True Technical Bid GST Registration Certificate and PAN Card. True Technical Bid Liquid assets and or availability of credit facilities of not less than Rs 28.75 Lakhs. True Technical Bid As per the KW-3 Tender document. True Technical Bid
tenderWorkLocationList
tenderAddress	createdTs 1727328945000 version 0 createdDate None modifiedDate None blockNumber Room No 11 1st floor DUDC Kalaburagi street None city Kalaburagi state Karnataka pin 585102
tenderRecallDTO	None