createdTs	None
version	None
createdDate	None
modifiedDate	None
noticeInvitingTenderDTO	createdTs 1726640332656 version 9 createdDate None modifiedDate None tenderType RFQ evaluationType TWO_COVER evaluationTypeText Two Cover invitingStrategy OPEN invitingStrategyText Open taxType INCLUSIVE_TAX tenderFee 3610.00 emd 200000.00 bidValueType ITEM_WISE bidValueTypeText Item wise tenderReceiptClose 18-10-2024 16:00:00 tenderQueryClose 15-10-2024 16:30:00 technicalBidOpen 19-10-2024 16:30:00 publishedDate 26-09-2024 19:21:12 publishedByPost CMC_MCOM_SRS publishedByUser KPE12425 - KANTHARAJU H bidValidityPeriod 180 noOfCalls 1 preBidMeetingDate 27-09-2024 16:30:00 preBidMeetingYn True preQualificationBidOpen None denominationType RUPEES denominationTypeText Rupees retenderedYn None percentageRateTypeText None contactPerson GANESH BHAT JE CMC Sirsi splitEmdRequiredYn False emdBankGuarantee None emdCash None bgValidityPeriod None hideWeightage None multipleCurrencySelectionAllowedYn False isTechWeightageAllowed False highestBidderSelection False isVariableEmdAllowed None qcbsTenderYn None itemwiseEmdRequiredYn None sampleSubmissionDate None officeNumber 08384226338 mobileNumber 9448965390 tenderSupplierList None
tenderSchedule	createdTs 1726640332685 version 9 createdDate None modifiedDate None tenderNumber DMA/2024-25/BD/WORK_INDENT27795 title CONSTRUCTION OF PROPOSED 10TDP MRF CENTER (MATERIAL RECOVERY FACILITY) OF PEB STRUCTURE (PRIMERY SHED) AT SIRSI IN SWM SITE. description CONSTRUCTION OF PROPOSED 10TDP MRF CENTER (MATERIAL RECOVERY FACILITY) OF PEB STRUCTURE (PRIMERY SHED) AT SIRSI IN SWM SITE. category WORKS categoryText Works ecv 14430000.02 deptName Directorate of Municipal Administration status PUBLISHED statusText Published remarks None csrValue None ecvtenderYn True location 2418 locationName DMA City Municipal Council Sirsi provisionalAmount 14430000.0 groupOverheadTotal 2294676.9 fileNumber CMC/SIRSI/SBM-2/MRF/SWM
tenderSubEstimateList	createdTs version createdDate modifiedDate workCategoryName subEstimateName estimateTotal itemList 1726640333000 1 None None Buildings CONSTRUCTION OF PROPOSED 10TDP MRF CENTER (MATERIAL RECOVERY FACILITY) OF PEB STRUCTURE (PRIMERY SHED) AT SIRSI IN SWM SITE. 11711815.78 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 4019530 155796 None 1.14.1 KSRB 1-1.14.1: Earth work excavation for Foundation by mechanical means for all works & depth up to 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift up to 1.5 m including cost of labor, tools, usage of machinery & other appurtenances required to complete the work Cum 114.24 114.24 236.34 False None None False None False 26999.4816 0 4019531 155796 None 2.1.3 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labor, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates Cum 6707.68 6707.68 100.81 False None None False None False 676201.2208 0 4019532 155796 None 2.3.2 KSRB 2-2.3.2:Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately). M30 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. Specification No. KBS 2.3., 2.3 Cum 7257.6 7257.6 51.04 False None None False None False 370427.904 0 4019533 155796 None 2.3.2 KSRB 2-2.3.2:Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately). M30 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. Specification No. KBS 2.3., 2.3 Cum 7838.21 7838.21 9.21 False None None False None False 72189.9141 0 4019534 155796 None 2.3.2 KSRB 2-2.3.2:Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately). M30 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. Specification No. KBS 2.3., 2.3 Cum 12337.92 12337.92 106.21 False None None False None False 1310410.4832 0 4019535 155796 None 2.2.3 KSRB 2-2.2.3.1 :Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately). M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (Item No. 2.2.3 Page No. 15 Vol.1 PWD SR & Appendix I page No.115) Cum 10644.48 10644.48 10.71 False None None False None False 114002.3808 0 4019536 155796 None 2.2.3 KSRB 2-2.2.3.1 :Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately). M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (Item No. 2.2.3 Page No. 15 Vol.1 PWD SR & Appendix I page No.115) Cum 7805.95 7805.95 67.2 False None None False None False 524559.84 0 4019537 155796 None 2.11 KSRB 2.11 Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. (Item No. 2.11 Page No. 18 Vol.1 PWD SR) Tonne 100191.84 100191.84 17.0832 False None None False None False 1711597.241088 0 4019538 155796 None 5.4 KSRB 5-5.4: Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) . (Item No. 5.4 Page No. 9 Vol.2 PWD SR) Cum 7155.68 7155.68 41.79 False None None False None False 299035.8672 0 4019539 155796 None 1.8 KSRB 1-1.8: Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour, rolling, water,all materials,usage& all other appurtenaces required to complete the work (Item No. 1.8 Page No. 7 Vol.1 PWD SR) Cum 530.88 530.88 1891.18 False None None False None False 1003989.6384 0 4019540 155796 None 6.33 KSRB 6-6.33: Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. (Item No. 6.33 Page No. 17 Vol.2 PWD SR) Sqm 1378.72 1378.72 274.42 False None None False None False 378348.3424 0 4019541 155796 None 8.8 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.(Item No.8.8 , Page No. 42, Vol.2) Sqm 415.52 415.52 599.37 False None None False None False 249050.2224 0 4019542 155796 None 11.2 Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-inCharge. (Item No. 11.2, Page No. 77, Vol.2) Kgs 126.56 126.56 27260.0 False None None False None False 3450025.6 0 4019543 155796 None 7.38 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05 %) total coated thickness with zinc coating 120 g/m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 m or as desired by Engineerin-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. (Item No. 7.38, Page No. 26, Vol.2) Sqm 636.16 636.16 1623.51 False None None False None False 1032812.1216 0 4019544 155796 None 8.51 KSRB 8-8.51 : Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge.(Item No. 8.51, Page No. 50, Vol.2) Sqm 112.0 112.0 599.37 False None None False None False 67129.44 0 4019545 155796 None 8.54.1 KSRB 8-8.54.1 : Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 g/L of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. One coat as per specifications and as per directions of Engineer in charge.(Item No. 8.54.1, Page No. 50, Vol.2) Sqm 81.76 81.76 308.0 False None None False None False 25182.08 0 4019546 155796 None 11.6.1 KSRB 11-11.6.1:Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 80x1.25 mm M.S. laths with 1.25 mm thick top cover including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. (Item No. 11.6.1, Page No. 78, Vol.2) Sqm 2948.96 2948.96 34.44 False None None False None False 101562.1824 0 4019547 155796 None 11.35.1.1 KSRB 11-11.8.4:Extra for providing 2 HP Mild Steel Auto Reverse Shutter Gearbox for operating rolling shutters including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.(Item No. 11.8.4, Page No. 79, Vol.2) Kg 27648.32 27648.32 2.0 False None None False None False 55296.64 0 4019548 155796 None 11.35.1.1 KSRB 11-11.35.1.1:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For Fixed Portion: Powder coated aluminium (minimum thickness of powder coating 50 micron) including cost of materials, labour, usage charges of machinery complete as per specifications.(Item No. 11.35.1.1, Page No. 87, Vol.2) Kg 506.24 506.24 480.0 False None None False None False 242995.2 0 1726640333000 1 None None Buildings CONSTRUCTION OF PROPOSED 10TDP MRF CENTER (MATERIAL RECOVERY FACILITY) OF PEB STRUCTURE (PRIMERY SHED) AT SIRSI IN SWM SITE.(ELECTRICAL) 423507.32 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 4019549 155797 None 1.1 LT Control Panel for PHE Equipments, like raw water, treated water, sump water lift pumps including starter control operating system.Completely made by CRCA fabricated, powder coated paint finished front openable compartment for all feeders requirement with IP-54. (Main Panel) (Incomer : MCCB TPN 100A with CBCT ELR & Ph indicators, meter section with all parameters as required, 100A 4 Wire 25kA 415V Aluminium busbars compartment. Outgoings: 63A MCCB feeder- 01No. Outgoings: 16A MPCB feeder - 01Nos Outgoings: 16A MPCB feeder - 02Nos Outgoings: 63/40A MCB feeder- 08Nos No 85000.0 85000.0 1.0 False None None False None False 85000.0 0 4019550 155797 None 1.2 Sub panel-1 Incomer: MCB TPN 63A with CBCT ELR & Ph indicators, section with all parameters as required Market price 63A 4 Wire 16kA 415V Aluminums busbars compartment. Outgoings: 40/63A 4P MCB feeder- 10No. Outgoings: 32A Industrial socket-02Nos. Outgoings: 16A Industrial socket-02Nos. No 35000.0 35000.0 1.0 False None None False None False 35000.0 0 4019551 155797 None 2.1 LT Cables Supply & laying 1.1kV LT UG cable XLPE / heat resistant PVC insulated, PVC extruded inner sheath armoured as per IS:1554 part-1 or IS:7098 part-1, Armouring thickness +5% and resistivity 14 Ohms /Kms Max as per IS: 3975. Glands & Lugs not included. 3.5Cx50 Sqmm Al Ar cable CSR Electrical SR-2023-24, ITEM NO:32.11 ,CH-1, PAGE NO-13 Km 178973.0 178973.0 0.045 False None None False None False 8053.785 0 4019552 155797 None 2.2 LT Cables Supply & laying 1.1kV LT UG cable XLPE / heat resistant PVC insulated, PVC extruded inner sheath armoured as per IS:1554 part-1 or IS:7098 part-1, Armouring thickness +5% and resistivity 14 Ohms /Kms Max as per IS: 3975. Glands & Lugs not included.4Cx25 Sqmm Al Ar cable CSR Electrical SR-2023-24, ITEM NO:32.08 ,CH-1, PAGE NO-13 Km 179844.0 179844.0 0.1 False None None False None False 17984.4 0 4019553 155797 None 2.2 LT Cables Supply & laying 1.1kV LT UG cable XLPE / heat resistant PVC insulated, PVC extruded inner sheath armoured as per IS:1554 part-1 or IS:7098 part-1, Armouring thickness +5% and resistivity 14 Ohms /Kms Max as per IS: 3975. Glands & Lugs not included.4Cx16 Sqmm Al Ar cable CSR Electrical SR-2023-24, ITEM NO:32.08 ,CH-1, PAGE NO-13 Km 141842.0 141842.0 0.12 False None None False None False 17021.04 0 4019554 155797 None 2.4 LT Cables Supply & laying 1.1kV LT UG cable XLPE / heat resistant PVC insulated, PVC extruded inner sheath armoured as per IS:1554 part-1 or IS:7098 part-1, Armouring thickness +5% and resistivity 14 Ohms /Kms Max as per IS: 3975. Glands & Lugs not included.4Cx10 Sqmm Cu Ar cable Mtr 332.0 332.0 5.0 False None None False None False 1660.0 0 4019555 155797 None 2.5 LT Cables Supply & laying 1.1kV LT UG cable XLPE / heat resistant PVC insulated, PVC extruded inner sheath armoured as per IS:1554 part-1 or IS:7098 part-1, Armouring thickness +5% and resistivity 14 Ohms /Kms Max as per IS: 3975. Glands & Lugs not included.4Cx6.0 Sqmm Cu Ar cable Mtr 256.0 256.0 5.0 False None None False None False 1280.0 0 4019556 155797 None 2.6 LT Cables Supply & laying 1.1kV LT UG cable XLPE / heat resistant PVC insulated, PVC extruded inner sheath armoured as per IS:1554 part-1 or IS:7098 part-1, Armouring thickness +5% and resistivity 14 Ohms /Kms Max as per IS: 3975. Glands & Lugs not included.3Cx6.0 Sqmm Cu Un Ar cable Mtr 316.0 316.0 5.0 False None None False None False 1580.0 0 4019557 155797 None 2.7 LT Control Panel for PHE Equipments, like raw water, treated water, sump water lift pumps including starter control operating system.Completely made by CRCA fabricated, powder coated paint finished front openable compartment for all feeders requirement with IP-54.3Cx4.0 Sqmm Cu Un Ar cable Mtr 300.0 300.0 5.0 False None None False None False 1500.0 0 4019558 155797 None 3.1 Supply & installation of LT Cables End termination - Heavyduty cable Glands suitable for UG cable of 1.1kV Class. 3.5Cx50 Sqmm Al Ar cable Set 200.0 200.0 2.0 False None None False None False 400.0 0 4019559 155797 None 4.2 4Cx25 Sqmm Al Ar cable Set 67.2 67.2 2.0 False None None False None False 134.4 0 4019560 155797 None 3.3 4Cx16 Sqmm Al Ar cable Set 67.2 67.2 2.0 False None None False None False 134.4 0 4019561 155797 None 3.4 4Cx10 Sqmm Cu Ar cable Set 54.4 54.4 2.0 False None None False None False 108.8 0 4019562 155797 None 3.5 4Cx6.0 Sqmm Cu Ar cable Set 54.4 54.4 2.0 False None None False None False 108.8 0 4019563 155797 None 3.6 3Cx6.0 Sqmm Cu Un Ar cable Set 54.4 54.4 2.0 False None None False None False 108.8 0 4019564 155797 None 3.7 3Cx4.0 Sqmm Cu Un Ar cable Set 54.4 54.4 2.0 False None None False None False 108.8 0 4019565 155797 None 3.8 Supply & installation of Tinned Copper lugs crimping & wiring to terminal point. 70 Sqmm Al Ar cable (tinned copper lug) Set 250.0 250.0 2.0 False None None False None False 500.0 0 4019566 155797 None 3.9 25 Sqmm Al Ar cable (tinned copper lug) Set 16.0 16.0 2.0 False None None False None False 32.0 0 4019567 155797 None 3.10 16 Sqmm Al Ar cable (tinned copper lug) Set 9.95 9.95 2.0 False None None False None False 19.9 0 4019568 155797 None 3.11 10 Sqmm Cu Ar cable (tinned copper lug) Set 6.4 6.4 1.0 False None None False None False 6.4 0 4019569 155797 None 3.12 6.0 Sqmm Cu Ar cable (tinned copper lug) Set 5.6 5.6 1.0 False None None False None False 5.6 0 4019570 155797 None 3.13 6.0 Sqmm Cu Un Ar cable (tinned copper lug) Set 5.6 5.6 1.0 False None None False None False 5.6 0 4019571 155797 None 3.14 4.0 Sqmm Cu Un Ar cable (tinned copper lug) Set 5.6 5.6 1.0 False None None False None False 5.6 0 4019572 155797 None 4.1 PVC conduits & Accessories Supplying & Fixing heavey guage PVC conduit type 2mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc, and shall be concealed in wall/RCC slab or exposed on fixing invrted wood plugs in case of RCC ceiling and RCC wall/stone structure or rawl plugs in case of brick wall & cement plastering the damaged portion using heavy gauage saddles at interval of 700mm using NF screws.19/20mm dia PVC 2mm thick conduit Mtr 69.0 69.0 24.0 False None None False None False 1656.0 0 4019573 155797 None 4.2 25mm dia PVC 2mm thick conduit Mtr 81.0 81.0 40.0 False None None False None False 3240.0 0 4019574 155797 None 5.1 Point wiring using Copper wire with switch Supply & wiring from switch board upto first light point & looped continously for the extent light points. Wire size 2x1.5 Sqmm Ph-N & 1x1.0Sqmm for E for point wiring laid in existing conduit.1 Light point upto 3Mtr from switch board Point 285.0 285.0 5.0 False None None False None False 1425.0 0 4019575 155797 None 5.2 1 Light point above 3M upto 6Mtr from switch board Point 394.0 394.0 10.0 False None None False None False 3940.0 0 4019576 155797 None 5.3 1 Light point above 6M upto 10Mtr from switch board Point 570.0 570.0 15.0 False None None False None False 8550.0 0 4019577 155797 None 5.4 2 Light point above 3Mtr upto 6Mtr from switch board Point 708.0 708.0 5.0 False None None False None False 3540.0 0 4019578 155797 None 5.5 2 Light point above 6Mtr upto 10Mtr from switch board Point 721.0 721.0 10.0 False None None False None False 7210.0 0 4019579 155797 None 5.6 3 Light point above 6Mtr upto 10Mtr from switch board Point 1035.0 1035.0 15.0 False None None False None False 15525.0 0 4019580 155797 None 6.1 Circuit main wiring Supply & wiring from distribution board to looping switch boards. Laid wire size 2x2.5 Sqmm Ph-N & 1x1.5Sqmm for E for Lighting circuit wiring laid in existing conduit. 1.0 Sqmm Cu FRLS wire Mtr 19.0 19.0 250.0 False None None False None False 4750.0 0 4019581 155797 None 6.2 1.5 Sqmm Cu FRLS wire Mtr 26.0 26.0 250.0 False None None False None False 6500.0 0 4019582 155797 None 6.3 2.5 Sqmm Cu FRLS wire Mtr 42.0 42.0 250.0 False None None False None False 10500.0 0 4019583 155797 None 6.4 4.0 Sqmm Cu FRLS wire Mtr 63.0 63.0 50.0 False None None False None False 3150.0 0 4019584 155797 None 6.5 6.0 Sqmm Cu FRLS wire Mtr 92.0 92.0 50.0 False None None False None False 4600.0 0 4019585 155797 None 7.1 Switches & sockets outlets in Existing modular box Supplying of Ceiling Fan 48'' Sweep 5 Star (1200mm) Each 2677.0 2677.0 9.0 False None None False None False 24093.0 0 4019586 155797 None 7.2 Stepped fan regulator No 357.0 357.0 10.0 False None None False None False 3570.0 0 4019587 155797 None 7.3 6/16A Universal socket Nos 236.0 236.0 2.0 False None None False None False 472.0 0 4019588 155797 None 7.4 Fixing Charge A Celing/ Wall Mounting Fan Each 171.0 171.0 10.0 False None None False None False 1710.0 0 4019589 155797 None 7.5 6 Way Polycarbonate switch box Each 173.0 173.0 4.0 False None None False None False 692.0 0 4019590 155797 None 7.6 10 - 12 Way Polycarbonate switch box Each 261.0 261.0 2.0 False None None False None False 522.0 0 4019591 155797 None 7.7 6 Module Polycarbonate switch Plate Each 234.0 234.0 4.0 False None None False None False 936.0 0 4019592 155797 None 7.8 10 - 12 Module Polycarbonate switch Plate Each 344.0 344.0 2.0 False None None False None False 688.0 0 4019593 155797 None 8.1 Light fixture Supply & fixing of 100W LED light fixture IP 65, included screws accessoris Etc.Considered outdoor type light fitting for equivalent. No 9486.0 9486.0 10.0 False None None False None False 94860.0 0 4019594 155797 None 9.1 Earthing 25x6mm GI Earth Strip Mtr 92.0 92.0 50.0 False None None False None False 4600.0 0 4019595 155797 None 10.1 Supply & installation of Cable Trays fixed with MS angles, hitech & anchor fastner supports at interval 0.9M interval shall be included complete run below ceiling/wall. Supply & installation of GI Ladder type cable tray 300x50mm Mtr 587.0 587.0 50.0 False None None False None False 29350.0 0 4019596 155797 None 11.1 Pipe Grounding GI Grounding pipe, B - Class, 42 mm dia, 2.5 Mtr long, 3.2 mm thick with bolt, nut, GI Strips and washer completeMinimum Weight of GI Pipe: 7.3 Kg No 743.0 743.0 10.0 False None None False None False 7430.0 0 4019597 155797 None 11.2 Good Quality well burnt Charcoal for grounding purposes packed in non returnable gunny bag of 30 Kg each. No 676.0 676.0 10.0 False None None False None False 6760.0 0 4019598 155797 None 11.3 Good Quality Salt for grounding purposes packed in 50 Kg gunny bag. No 310.0 310.0 8.0 False None None False None False 2480.0 0 1726668018000 1 None None Buildings CONSTRUCTION OF PROPOSED 10TDP MRF CENTER (MATERIAL RECOVERY FACILITY) OF PEB STRUCTURE (PRIMERY SHED) AT SIRSI IN SWM SITE. 12135323.12 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 4025592 156032 None 1.14.1 KSRB 1-1.14.1: Earth work excavation for Foundation by mechanical means for all works & depth up to 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift up to 1.5 m including cost of labor, tools, usage of machinery & other appurtenances required to complete the work Cum 114.24 114.24 236.34 False None None False None False 26999.4816 0 4025611 156032 None 1.1 LT Control Panel for PHE Equipments, like raw water, treated water, sump water lift pumps including starter control operating system.Completely made by CRCA fabricated, powder coated paint finished front openable compartment for all feeders requirement with IP-54. (Main Panel) (Incomer : MCCB TPN 100A with CBCT ELR & Ph indicators, meter section with all parameters as required, 100A 4 Wire 25kA 415V Aluminium busbars compartment. Outgoings: 63A MCCB feeder- 01No. Outgoings: 16A MPCB feeder - 01Nos Outgoings: 16A MPCB feeder - 02Nos Outgoings: 63/40A MCB feeder- 08Nos No 85000.0 85000.0 1.0 False None None False None False 85000.0 0 4025612 156032 None 1.2 Sub panel-1 Incomer: MCB TPN 63A with CBCT ELR & Ph indicators, section with all parameters as required Market price 63A 4 Wire 16kA 415V Aluminums busbars compartment. Outgoings: 40/63A 4P MCB feeder- 10No. Outgoings: 32A Industrial socket-02Nos. Outgoings: 16A Industrial socket-02Nos. No 35000.0 35000.0 1.0 False None None False None False 35000.0 0 4025593 156032 None 2.1.3 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labor, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates Cum 6707.68 6707.68 100.81 False None None False None False 676201.2208 0 4025594 156032 None 2.3.2 KSRB 2-2.3.2:Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately). M30 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. Specification No. KBS 2.3., 2.3 Cum 7257.6 7257.6 51.04 False None None False None False 370427.904 0 4025613 156032 None 2.1 LT Cables Supply & laying 1.1kV LT UG cable XLPE / heat resistant PVC insulated, PVC extruded inner sheath armoured as per IS:1554 part-1 or IS:7098 part-1, Armouring thickness +5% and resistivity 14 Ohms /Kms Max as per IS: 3975. Glands & Lugs not included. 3.5Cx50 Sqmm Al Ar cable CSR Electrical SR-2023-24, ITEM NO:32.11 ,CH-1, PAGE NO-13 Km 178973.0 178973.0 0.045 False None None False None False 8053.785 0 4025595 156032 None 2.3.2 KSRB 2-2.3.2:Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately). M30 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. Specification No. KBS 2.3., 2.3 Cum 7838.21 7838.21 9.21 False None None False None False 72189.9141 0 4025614 156032 None 2.2 LT Cables Supply & laying 1.1kV LT UG cable XLPE / heat resistant PVC insulated, PVC extruded inner sheath armoured as per IS:1554 part-1 or IS:7098 part-1, Armouring thickness +5% and resistivity 14 Ohms /Kms Max as per IS: 3975. Glands & Lugs not included.4Cx25 Sqmm Al Ar cable CSR Electrical SR-2023-24, ITEM NO:32.08 ,CH-1, PAGE NO-13 Km 179844.0 179844.0 0.1 False None None False None False 17984.4 0 4025596 156032 None 2.3.2 KSRB 2-2.3.2:Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately). M30 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. Specification No. KBS 2.3., 2.3 Cum 12337.92 12337.92 106.21 False None None False None False 1310410.4832 0 4025615 156032 None 2.2 LT Cables Supply & laying 1.1kV LT UG cable XLPE / heat resistant PVC insulated, PVC extruded inner sheath armoured as per IS:1554 part-1 or IS:7098 part-1, Armouring thickness +5% and resistivity 14 Ohms /Kms Max as per IS: 3975. Glands & Lugs not included.4Cx16 Sqmm Al Ar cable CSR Electrical SR-2023-24, ITEM NO:32.08 ,CH-1, PAGE NO-13 Km 141842.0 141842.0 0.12 False None None False None False 17021.04 0 4025616 156032 None 2.4 LT Cables Supply & laying 1.1kV LT UG cable XLPE / heat resistant PVC insulated, PVC extruded inner sheath armoured as per IS:1554 part-1 or IS:7098 part-1, Armouring thickness +5% and resistivity 14 Ohms /Kms Max as per IS: 3975. Glands & Lugs not included.4Cx10 Sqmm Cu Ar cable Mtr 332.0 332.0 5.0 False None None False None False 1660.0 0 4025597 156032 None 2.2.3 KSRB 2-2.2.3.1 :Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately). M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (Item No. 2.2.3 Page No. 15 Vol.1 PWD SR & Appendix I page No.115) Cum 10644.48 10644.48 10.71 False None None False None False 114002.3808 0 4025617 156032 None 2.5 LT Cables Supply & laying 1.1kV LT UG cable XLPE / heat resistant PVC insulated, PVC extruded inner sheath armoured as per IS:1554 part-1 or IS:7098 part-1, Armouring thickness +5% and resistivity 14 Ohms /Kms Max as per IS: 3975. Glands & Lugs not included.4Cx6.0 Sqmm Cu Ar cable Mtr 256.0 256.0 5.0 False None None False None False 1280.0 0 4025598 156032 None 2.2.3 KSRB 2-2.2.3.1 :Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately). M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (Item No. 2.2.3 Page No. 15 Vol.1 PWD SR & Appendix I page No.115) Cum 7805.95 7805.95 67.2 False None None False None False 524559.84 0 4025599 156032 None 2.11 KSRB 2.11 Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. (Item No. 2.11 Page No. 18 Vol.1 PWD SR) Tonne 100191.84 100191.84 17.0832 False None None False None False 1711597.241088 0 4025618 156032 None 2.6 LT Cables Supply & laying 1.1kV LT UG cable XLPE / heat resistant PVC insulated, PVC extruded inner sheath armoured as per IS:1554 part-1 or IS:7098 part-1, Armouring thickness +5% and resistivity 14 Ohms /Kms Max as per IS: 3975. Glands & Lugs not included.3Cx6.0 Sqmm Cu Un Ar cable Mtr 316.0 316.0 5.0 False None None False None False 1580.0 0 4025600 156032 None 5.4 KSRB 5-5.4: Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) . (Item No. 5.4 Page No. 9 Vol.2 PWD SR) Cum 7155.68 7155.68 41.79 False None None False None False 299035.8672 0 4025619 156032 None 2.7 LT Control Panel for PHE Equipments, like raw water, treated water, sump water lift pumps including starter control operating system.Completely made by CRCA fabricated, powder coated paint finished front openable compartment for all feeders requirement with IP-54.3Cx4.0 Sqmm Cu Un Ar cable Mtr 300.0 300.0 5.0 False None None False None False 1500.0 0 4025601 156032 None 1.8 KSRB 1-1.8: Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour, rolling, water,all materials,usage& all other appurtenaces required to complete the work (Item No. 1.8 Page No. 7 Vol.1 PWD SR) Cum 530.88 530.88 1891.18 False None None False None False 1003989.6384 0 4025620 156032 None 3.1 Supply & installation of LT Cables End termination - Heavyduty cable Glands suitable for UG cable of 1.1kV Class. 3.5Cx50 Sqmm Al Ar cable Set 200.0 200.0 2.0 False None None False None False 400.0 0 4025621 156032 None 4.2 4Cx25 Sqmm Al Ar cable Set 67.2 67.2 2.0 False None None False None False 134.4 0 4025602 156032 None 6.33 KSRB 6-6.33: Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. (Item No. 6.33 Page No. 17 Vol.2 PWD SR) Sqm 1378.72 1378.72 274.42 False None None False None False 378348.3424 0 4025603 156032 None 8.8 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.(Item No.8.8 , Page No. 42, Vol.2) Sqm 415.52 415.52 599.37 False None None False None False 249050.2224 0 4025622 156032 None 3.3 4Cx16 Sqmm Al Ar cable Set 67.2 67.2 2.0 False None None False None False 134.4 0 4025623 156032 None 3.4 4Cx10 Sqmm Cu Ar cable Set 54.4 54.4 2.0 False None None False None False 108.8 0 4025604 156032 None 11.2 Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-inCharge. (Item No. 11.2, Page No. 77, Vol.2) Kgs 126.56 126.56 27260.0 False None None False None False 3450025.6 0 4025624 156032 None 3.5 4Cx6.0 Sqmm Cu Ar cable Set 54.4 54.4 2.0 False None None False None False 108.8 0 4025605 156032 None 7.38 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05 %) total coated thickness with zinc coating 120 g/m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 m or as desired by Engineerin-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. (Item No. 7.38, Page No. 26, Vol.2) Sqm 636.16 636.16 1623.51 False None None False None False 1032812.1216 0 4025606 156032 None 8.51 KSRB 8-8.51 : Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge.(Item No. 8.51, Page No. 50, Vol.2) Sqm 112.0 112.0 599.37 False None None False None False 67129.44 0 4025625 156032 None 3.6 3Cx6.0 Sqmm Cu Un Ar cable Set 54.4 54.4 2.0 False None None False None False 108.8 0 4025607 156032 None 8.54.1 KSRB 8-8.54.1 : Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 g/L of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. One coat as per specifications and as per directions of Engineer in charge.(Item No. 8.54.1, Page No. 50, Vol.2) Sqm 81.76 81.76 308.0 False None None False None False 25182.08 0 4025626 156032 None 3.7 3Cx4.0 Sqmm Cu Un Ar cable Set 54.4 54.4 2.0 False None None False None False 108.8 0 4025608 156032 None 11.6.1 KSRB 11-11.6.1:Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 80x1.25 mm M.S. laths with 1.25 mm thick top cover including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. (Item No. 11.6.1, Page No. 78, Vol.2) Sqm 2948.96 2948.96 34.44 False None None False None False 101562.1824 0 4025627 156032 None 3.8 Supply & installation of Tinned Copper lugs crimping & wiring to terminal point. 70 Sqmm Al Ar cable (tinned copper lug) Set 250.0 250.0 2.0 False None None False None False 500.0 0 4025628 156032 None 3.9 25 Sqmm Al Ar cable (tinned copper lug) Set 16.0 16.0 2.0 False None None False None False 32.0 0 4025609 156032 None 11.35.1.1 KSRB 11-11.8.4:Extra for providing 2 HP Mild Steel Auto Reverse Shutter Gearbox for operating rolling shutters including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.(Item No. 11.8.4, Page No. 79, Vol.2) Kg 27648.32 27648.32 2.0 False None None False None False 55296.64 0 4025629 156032 None 3.10 16 Sqmm Al Ar cable (tinned copper lug) Set 9.95 9.95 2.0 False None None False None False 19.9 0 4025610 156032 None 11.35.1.1 KSRB 11-11.35.1.1:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For Fixed Portion: Powder coated aluminium (minimum thickness of powder coating 50 micron) including cost of materials, labour, usage charges of machinery complete as per specifications.(Item No. 11.35.1.1, Page No. 87, Vol.2) Kg 506.24 506.24 480.0 False None None False None False 242995.2 0 4025630 156032 None 3.11 10 Sqmm Cu Ar cable (tinned copper lug) Set 6.4 6.4 1.0 False None None False None False 6.4 0 4025631 156032 None 3.12 6.0 Sqmm Cu Ar cable (tinned copper lug) Set 5.6 5.6 1.0 False None None False None False 5.6 0 4025632 156032 None 3.13 6.0 Sqmm Cu Un Ar cable (tinned copper lug) Set 5.6 5.6 1.0 False None None False None False 5.6 0 4025633 156032 None 3.14 4.0 Sqmm Cu Un Ar cable (tinned copper lug) Set 5.6 5.6 1.0 False None None False None False 5.6 0 4025634 156032 None 4.1 PVC conduits & Accessories Supplying & Fixing heavey guage PVC conduit type 2mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc, and shall be concealed in wall/RCC slab or exposed on fixing invrted wood plugs in case of RCC ceiling and RCC wall/stone structure or rawl plugs in case of brick wall & cement plastering the damaged portion using heavy gauage saddles at interval of 700mm using NF screws.19/20mm dia PVC 2mm thick conduit Mtr 69.0 69.0 24.0 False None None False None False 1656.0 0 4025635 156032 None 4.2 25mm dia PVC 2mm thick conduit Mtr 81.0 81.0 40.0 False None None False None False 3240.0 0 4025636 156032 None 5.1 Point wiring using Copper wire with switch Supply & wiring from switch board upto first light point & looped continously for the extent light points. Wire size 2x1.5 Sqmm Ph-N & 1x1.0Sqmm for E for point wiring laid in existing conduit.1 Light point upto 3Mtr from switch board Point 285.0 285.0 5.0 False None None False None False 1425.0 0 4025637 156032 None 5.2 1 Light point above 3M upto 6Mtr from switch board Point 394.0 394.0 10.0 False None None False None False 3940.0 0 4025638 156032 None 5.3 1 Light point above 6M upto 10Mtr from switch board Point 570.0 570.0 15.0 False None None False None False 8550.0 0 4025639 156032 None 5.4 2 Light point above 3Mtr upto 6Mtr from switch board Point 708.0 708.0 5.0 False None None False None False 3540.0 0 4025640 156032 None 5.5 2 Light point above 6Mtr upto 10Mtr from switch board Point 721.0 721.0 10.0 False None None False None False 7210.0 0 4025641 156032 None 5.6 3 Light point above 6Mtr upto 10Mtr from switch board Point 1035.0 1035.0 15.0 False None None False None False 15525.0 0 4025642 156032 None 6.1 Circuit main wiring Supply & wiring from distribution board to looping switch boards. Laid wire size 2x2.5 Sqmm Ph-N & 1x1.5Sqmm for E for Lighting circuit wiring laid in existing conduit. 1.0 Sqmm Cu FRLS wire Mtr 19.0 19.0 250.0 False None None False None False 4750.0 0 4025643 156032 None 6.2 1.5 Sqmm Cu FRLS wire Mtr 26.0 26.0 250.0 False None None False None False 6500.0 0 4025644 156032 None 6.3 2.5 Sqmm Cu FRLS wire Mtr 42.0 42.0 250.0 False None None False None False 10500.0 0 4025645 156032 None 6.4 4.0 Sqmm Cu FRLS wire Mtr 63.0 63.0 50.0 False None None False None False 3150.0 0 4025646 156032 None 6.5 6.0 Sqmm Cu FRLS wire Mtr 92.0 92.0 50.0 False None None False None False 4600.0 0 4025647 156032 None 7.1 Switches & sockets outlets in Existing modular box Supplying of Ceiling Fan 48'' Sweep 5 Star (1200mm) Each 2677.0 2677.0 9.0 False None None False None False 24093.0 0 4025648 156032 None 7.2 Stepped fan regulator No 357.0 357.0 10.0 False None None False None False 3570.0 0 4025649 156032 None 7.3 6/16A Universal socket Nos 236.0 236.0 2.0 False None None False None False 472.0 0 4025650 156032 None 7.4 Fixing Charge A Celing/ Wall Mounting Fan Each 171.0 171.0 10.0 False None None False None False 1710.0 0 4025651 156032 None 7.5 6 Way Polycarbonate switch box Each 173.0 173.0 4.0 False None None False None False 692.0 0 4025652 156032 None 7.6 10 - 12 Way Polycarbonate switch box Each 261.0 261.0 2.0 False None None False None False 522.0 0 4025653 156032 None 7.7 6 Module Polycarbonate switch Plate Each 234.0 234.0 4.0 False None None False None False 936.0 0 4025654 156032 None 7.8 10 - 12 Module Polycarbonate switch Plate Each 344.0 344.0 2.0 False None None False None False 688.0 0 4025655 156032 None 8.1 Light fixture Supply & fixing of 100W LED light fixture IP 65, included screws accessoris Etc.Considered outdoor type light fitting for equivalent. No 9486.0 9486.0 10.0 False None None False None False 94860.0 0 4025656 156032 None 9.1 Earthing 25x6mm GI Earth Strip Mtr 92.0 92.0 50.0 False None None False None False 4600.0 0 4025657 156032 None 10.1 Supply & installation of Cable Trays fixed with MS angles, hitech & anchor fastner supports at interval 0.9M interval shall be included complete run below ceiling/wall. Supply & installation of GI Ladder type cable tray 300x50mm Mtr 587.0 587.0 50.0 False None None False None False 29350.0 0 4025658 156032 None 11.1 Pipe Grounding GI Grounding pipe, B - Class, 42 mm dia, 2.5 Mtr long, 3.2 mm thick with bolt, nut, GI Strips and washer completeMinimum Weight of GI Pipe: 7.3 Kg No 743.0 743.0 10.0 False None None False None False 7430.0 0 4025659 156032 None 11.2 Good Quality well burnt Charcoal for grounding purposes packed in non returnable gunny bag of 30 Kg each. No 676.0 676.0 10.0 False None None False None False 6760.0 0 4025660 156032 None 11.3 Good Quality Salt for grounding purposes packed in 50 Kg gunny bag. No 310.0 310.0 8.0 False None None False None False 2480.0 0
generalCriterionList	createdTs version createdDate modifiedDate criterionType description tenderEligibilityCriterionDocumentList 1726640335000 0 None None ELIGIBILITY Tenders from Joint ventures are not acceptable. None 1726640335000 0 None None ELIGIBILITY Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka None 1726640335000 1 None None ELIGIBILITY The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility KPPP portal due to internet connectivity issues and technical glitches at bidders end. None 1726640335000 0 None None ELIGIBILITY It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission. None 1726640335000 0 None None ELIGIBILITY EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection. None 1726662005000 0 None None ELIGIBILITY It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e- Procurement on or before the last date and time of bid submission. None 1726662024000 0 None None ELIGIBILITY EMD Payments through e-Payment mode shall be made as one singletransaction and payments made in part are liable for rejection. None 1726662103000 0 None None ELIGIBILITY Bidder shall pay Contract Management Module processing fees of 0.025% of the contact value Min Rs.500 Max Rs.7500 soon after contract has been issued to bidder None 1726662136000 0 None None ELIGIBILITY The Item Rate quoted shall include the Royalty Charges on construction materials and other taxes as per prevailing Government Orders. None 1726662420000 0 None None ELIGIBILITY As per Karnataka State Government Order No. LD/300/LET/2006 Bangalore Dated 01.01.2007 and Government Letter No PW/134/BMS/2007 Dated 27.7.2007 a sum amounting to 1 % of the bill amount will be deducted towards Construction Labor Welfare fund. None 1726662446000 0 None None ELIGIBILITY The Item Rate quoted shall include the Royalty Charges on construction materials and other taxes as per prevailing Government Orders. None 1726662462000 0 None None ELIGIBILITY Conditional tenders will not be accepted None 1726662482000 0 None None ELIGIBILITY All the items in the tender include all lead, lifts, lab our, hire charges of machinery curing for concrete works, and all other incidental charges necessary for successful completion of works as per the direction of Engineer in charge of this work. None 1726662594000 0 None None ELIGIBILITY The Tendered shall obtain the work done certificate in the prescribed format from the Competent Authority not below the rank of Executive Engineer (District Level Officer) and scan the Original Certificate and attach the scanned file to the Bid the Original Certificate/ Certificates shall be produced at the time of opening of technical Bids for physical verification None 1726662632000 0 None None ELIGIBILITY The tenderer shall note that the scanned Documents can also be uploaded in the tasks created under Document/Evidence Required from the Bidder None 1726662648000 0 None None ELIGIBILITY The Employer reserves the right to Reject any or all Tenders without assigning any reason None 1726662667000 0 None None ELIGIBILITY The Department is not responsible for any delay in accessing eprocurement portal None 1726662954000 0 None None ELIGIBILITY Tender shall note that the Tenders of those found Eligible as mentioned in Clause 3-Qualification of tenderer in section 2 Qualification of the Tenderer in Section 2 : Instructions to Tenderer I T T will only be considered for evaluation None 1726662990000 0 None None ELIGIBILITY To Qualify or award of this contract, each bidder should give all details and documents as per technical and financial bid attached to this tender None 1726663038000 0 None None ELIGIBILITY The bidders shall bear all costs associated with the preparation and submission of each tender, and the employer will in no case be responsible and liable for those costs. None 1726663088000 1 None None ELIGIBILITY All materials required for this work shall be procured by the bidder himself and should get tested by the quality control authorities at his own cost before use on the work. None 1726663135000 3 None None ELIGIBILITY The tenderer should maintain the Building / Shed during the period of 24Months. None 1726663532000 0 None None ELIGIBILITY Financial turnover of previous years shall be given a weightage of 10% per year to bring them to the price level of the 2024-25 in the Technical Qualification Criteria mentioned in the next section None 1726664821000 0 None None ELIGIBILITY It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission. None 1726664896000 0 None None ELIGIBILITY The Tenderer should be a KPWD Registered contractor as per Bid Document None 1726664927000 0 None None ELIGIBILITY The intending contractors are requested to note that they should abide by the detailed instructions and conditions contained in the standard tender documents KW-4 KPWD and further orders thereon. None 1726665270000 0 None None ELIGIBILITY Maintenance Period is 24 months (including monsoon.) None 1726665531000 0 None None ELIGIBILITY EMD Part (1) Rs. 200000/-by e-payment in favor of Municipal Commissioner CMC Sirsi None 1726665597000 0 None None ELIGIBILITY Successful bidder should produce 5% of the Contract price plus difference amount for unbalanced tenders in accordance with Clause 25.5 of ITT and Clause 44 of the Conditions of Contract. None 1726665624000 0 None None ELIGIBILITY Any deviation / error / mistake found in units of items, they should be read as in the unified SR 2023-24 and the rates shall be quoted accordingly None 1726665652000 0 None None ELIGIBILITY Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded None 1726665737000 0 None None ELIGIBILITY The Estimate rates are exclusive of 18% GST None
preQualCriterionList	None
technicalCriterionList	createdTs version createdDate modifiedDate description criterionCategoryText criterionTypeOthersValue tenderTechnicalCriterionDocumentList None None None None Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded None None None None None None 3.2 B) To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e. 2019-20 2020-21, 2021-22, 2022-23 & 2023-24 Satisfactorily completed as prime contractor, at least one similar nature of work such as Building/ Shed work of value not less than Rs.60.675 Lakhs. Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None Minimum 80% Quantity Executed in One year as per Bid Document Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. 242.70Lakhs) Financial Status None createdTs version createdDate modifiedDate documentName None None None None Audited CA Certificate of Annual Turnover None None None None To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e. 2019-20 2020-21 2021-22, 2022-23, 2023-24) Achieved in at least Two Financial years a minimum annual financial turnover Rs.242.70 Lakhs(in all classes of civil engineering construction works only) Financial Status None createdTs version createdDate modifiedDate documentName None None None None Audited CA Certificate of Annual Turnover None None None None Annual Financial Turnover Certificate for the last five years i.e from 2019-20 to 2023-24, UDIN is preferred in Turnover certificate. Financial Status None createdTs version createdDate modifiedDate documentName None None None None Audited CA Certificate of Annual Turnover None None None None LINE OF CREDIT CERTIFICATE Financial Status None createdTs version createdDate modifiedDate documentName None None None None Line of Credit None None None None KPWD REGISTRATION CERTIFICATE Others KPWD REGISTRATION CERTIFICATE createdTs version createdDate modifiedDate documentName None None None None PWD Registration Certificate (Class I/II/III/IV) None None None None List of existing commitments and ongoing work Others List of existing commitments and ongoing work createdTs version createdDate modifiedDate documentName None None None None Others -- List of existing commitments and ongoing work LIST None None None None List of works for which tenders already submitted Others List of works for which tenders already submitted createdTs version createdDate modifiedDate documentName None None None None Others -- List of works for which tenders already submitted None None None None BID CAPACITY A X N X 1.50 - B Others BID CAPACITY A X N X 1.50 - B createdTs version createdDate modifiedDate documentName None None None None Others -- BID CAPACITY A X N X 1.50 - B None None None None PAN CARD Others PAN CARD createdTs version createdDate modifiedDate documentName None None None None Others -- PAN CARD None None None None ADRESS PROOF Others ADRESS PROOF createdTs version createdDate modifiedDate documentName None None None None Others -- ADRESS PROOF None None None None GST Registration Certificate Others GST Registration Certificate createdTs version createdDate modifiedDate documentName None None None None GST Registration None None None None GST Clearance Certificate Others GST Clearance Certificate createdTs version createdDate modifiedDate documentName None None None None Others -- GST Clearance Certificate
tenderCriterionDocumentList	documentName optional documentTypeText Annual Financial Turnover Certificate for the last five years i.e from 2019-20 to 2023-24, UDIN is preferred in Turnover certificate. True Technical Bid KPWD Registration Certificate True Technical Bid SIMILAR NATURE OF WORKDONE CERTIFICATE True Technical Bid ITEMWISE WORKDONE True Technical Bid LINE OF CREDIT CERTIFICATE True Technical Bid GST REGISTRATION AND CLEARENCE CERTIFICATE True Technical Bid List of existing commitments and ongoing work True Technical Bid List of works for which tenders already submitted True Technical Bid PAN CARD True Technical Bid Address Proof True Technical Bid Bid Capacity A x N x 1.50 - B True Technical Bid
tenderWorkLocationList
tenderAddress	createdTs 1727092512000 version 0 createdDate None modifiedDate None blockNumber CITY MUNICIPAL COUNCIL, SIRSI street None city SIRSI state Karnataka pin 581402
tenderRecallDTO	None