1727344693000 | 0 | None | None | Water supply/sewage lines | Providing & laying 230mm dia GSW line in place of 150mm GSW line and reconstruction of machineholes at 11th cross Sir MV layout coming under Vidyaranyapura S/stn of AEEN-2-2 sub division. | 427205.84 | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
---|
4083417 | 158935 | None | 001 | Dismantling of Flexible pavements and disposal of dismantled
materials and stacking serviceable and unserviceable materials separately,By mechanical means | Cum | 322.0 | 322.0 | 16.69 | False | None | None | False | None | False | 5374.18 | 0 | 4083418 | 158935 | None | 002 | Earth work excavation for pipeline trenches in all kinds of soils by mechanicalmeans as per drawing and technical specifications, including setting out,construction of shoring, strutting, barricading, caution lights, bracing, usingsight rails & bonding rods at every 100 mm wherever necessary as directed,removal of stumps and other deleterious matter, dressing of sides and levellingthe bottom of trench to the extent required , utilising the available excavatedearth locally for the work etc., and all other appurtenances complete in the
following strata. All kinds of soils. Depth upto 1.50 m | Cum | 262.0 | 262.0 | 122.37 | False | None | None | False | None | False | 32060.94 | 0 | 4083419 | 158935 | None | 003 | Same as above 1.50 mtr to 3.00 mtr | Cum | 331.0 | 331.0 | 1.59 | False | None | None | False | None | False | 526.29 | 0 | 4083420 | 158935 | None | 004 | Providing lowering laying, jointing, testing andcommissioning offollowing diameters glazed stone ware pipes, conforming to IS 651:1992,(with 5th revision) in all respects jointing with EPDM rubber rings (sealsaccording to EN 681 & ASPM 425) The rubber seals joints pipe willhave groves in interior of socket and exterior of the spigot. The rubbergasket shall be prefixed at the factory by the manufacturer rigidly with approved glue to have leak proof joint including conveying of pipe towork site and rolling and lowering into trenches, laying true to line,level and perfect linking at joints testing and commissoning includingloading and unloading at both destinations and cuts of pipes wherevernecessary including jointing of GSW pipes and specials, with rubber gaskets conforming to EN 681 and ASTM C-425 including cleaningthe socket and spigot with soap solution and applying talcum powderfor detecting crack, then applying glue and before inserting of rubbergaskets, jacking and fixing in perfect condition including the cost of soapsolution, talcum powder and glue etc. and giving necessary hydraulic testto the required pressure of water head with all lead and lifts includingcosting of jointing materials and all necessary survey works for laying ofsewers etc., and disposal of debris as directed etc., complete. (Contractorwill make his own arrangements for procuring water for testing) withRubber ring gasket joints | Rmtr | 936.0 | 936.0 | 108.0 | False | None | None | False | None | False | 101088.0 | 0 | 4083421 | 158935 | None | 005 | Dismantling the damaged or collapsed Machinehole ,conical in shape,and reconstructing the same for the same dimensions, with machinemade wire cut brick in CM 1:4 with ordinary portland cement etc. asper design and specifications. The existing ring, cover and CC beedingto be used. For 1.2M dia: 1.00 mtr Depth | Nos | 15574.0 | 15574.0 | 4.0 | False | None | None | False | None | False | 62296.0 | 0 | 4083422 | 158935 | None | 006 | above 1.00 mtr to below 2.00 mtr depth (MH interms of 0.1 Mtr) | Nos | 1672.2 | 1672.2 | 5.0 | False | None | None | False | None | False | 8361.0 | 0 | 4083423 | 158935 | None | 007 | Dismantling the damaged or collapsed Machinehole ,conical in shape,and reconstructing the same for the same dimensions, with machinemade wire cut brick in CM 1:4 with ordinary portland cement etc. asper design and specifications. The existing ring, cover and CC beedingto be used. For 1.2M dia: 2.00 mtr Depth | Nos | 32296.0 | 32296.0 | 1.0 | False | None | None | False | None | False | 32296.0 | 0 | 4083424 | 158935 | None | 008 | Refilling available earth around trenches/pipelines, cables in layersnot exceeding 20 cms in depth, compacting each deposited layer byramming after watering with a lead upto 50 m , and lift upto 1.5 m.Including cost of all labour complete as per specifications | Cum | 160.0 | 160.0 | 108.76 | False | None | None | False | None | False | 17401.6 | 0 | 4083425 | 158935 | None | 009 | Providing, laying, spreading and compacting graded stoneaggregate to wet mix macadam specification includingpremixing the Material with water at OMC in mechanical mixplant carriage of mixed Material by tipper to site, laying in uniform layers with paver/grader in sub-base / base course onwell prepared surface and compacting with vibratory roller toachieve the desired density. | Cum | 2559.0 | 2559.0 | 16.69 | False | None | None | False | None | False | 42709.71 | 0 | 4083426 | 158935 | None | 010 | Providing and applying primer coat with SS1 grade Bitumen
Emulsion on prepared surface of granular base including
cleaning of road surface and spraying primer at the rate of 0.70kg/m2 using mechanical means. | Sqm | 41.0 | 41.0 | 108.0 | False | None | None | False | None | False | 4428.0 | 0 | 4083427 | 158935 | None | 011 | Providing and laying Bituminous Macadam with 100 tph
capacity hot mix plant batch type using crushed aggregates
of specified grading premixed with bituminous binderVG-30 @ 3.3% by weight of mix, transported to site, laid over a
previously prepared surface with mechanical paver finisher to
the required grade, level and alignment and rolled as per clauses501.6 and 501.7 to achieve the desired compaction | Cum | 7378.0 | 7378.0 | 5.4 | False | None | None | False | None | False | 39841.2 | 0 | 4083428 | 158935 | None | 012 | Providing and applying tack coat with RS1 Bituminous Emulsionusing emulsion pressure distributor at the rate of 0.20 kg/m2 onthe prepared bituminous surface cleaned with mechanical broom | Sqm | 12.0 | 12.0 | 108.0 | False | None | None | False | None | False | 1296.0 | 0 | 4083429 | 158935 | None | 013 | Providing and laying Bituminous Concrete with 100 TPH
capacity hot mix plant batch type using crushed aggregates ofspecified grading, premixed with bituminous binder VG-30 @5.2 per cent of mix and filler, transporting the hot mix to worksite, laying with mechanical paver finisher to the required grade,level and alignment, rolling with smooth wheeled, vibratory andtandem rollers to achieve the desired compaction as per MORTHspecification clause No. 507 complete in all respects | Cum | 10537.0 | 10537.0 | 2.16 | False | None | None | False | None | False | 22759.92 | 0 | 4083430 | 158935 | None | 014 | Removal of Unserviceable Soil with Disposal upto a suitable
distance as directed by the Engineer incharge of work | Cum | 85.0 | 85.0 | 15.2 | False | None | None | False | None | False | 1292.0 | 0 | 4083431 | 158935 | None | 015 | Providing PVC ringtite pipes conforming to IS 4985:2000 with latestamendments and conveying to worksite, rolling and lowering intotrenches, laying true to line and level and perfect linking at joints, testingand commissioning, including loading unloading at both destinationsand cuts of pipes wherever necessary including jointing of PVC pipesand specials (excluding cost of specials) with jointing of approvedtype, with all labour with all lead & lift including encasing the pipealround to a depth of not less than 15 cms. with soft gravel or selectedearth available from the excavation etc. complete and giving necessaryhydraulic test to the required pressure as per ISS (Contractor will makehis own arrangements for procuring water for testing) etc. complete For: PVC pipes 110mm dia., 6 kg/sqcm & class 3 | Rmtr | 411.0 | 411.0 | 70.0 | False | None | None | False | None | False | 28770.0 | 0 | 4083432 | 158935 | None | 016 | Supply and delivery at site special moulded variety PVC elbows as perIS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark withits latest amendments 110 mm dia PVC Elbows | Nos | 302.0 | 302.0 | 35.0 | False | None | None | False | None | False | 10570.0 | 0 | 4083433 | 158935 | None | 017 | Supply and delivery at site special moulded variety PVC reducer as perIS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark withits latest amendments 110 mm dia PVC REDUCER | Nos | 261.0 | 261.0 | 35.0 | False | None | None | False | None | False | 9135.0 | 0 | 4083434 | 158935 | None | 018 | SFRC MH Circ. 560 Frame+Cover HD | Nos | 1400.0 | 1400.0 | 5.0 | False | None | None | False | None | False | 7000.0 | 0 |
|