| 4086684 | 159117 | None | 001 | Earth work in surface excavation for stripping, seating of bund, Road way, by manual means for lowering & leveling the ground for all works other than foundation & depth in all kinds of soil not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage & other appurtenances required to complete the work. | Sqm | 100.1 | 100.1 | 65.0 | False | None | None | False | None | False | 6506.5 | 0 |
| 4086685 | 159117 | None | 002 | Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of buildings & bridges and such simillar works in all kinds of soils , as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work.
In all kinds of soils Depth upto 1.5 m | Cum | 266.2 | 266.2 | 115.0 | False | None | None | False | None | False | 30613.0 | 0 |
| 4086686 | 159117 | None | 003 | Providing and laying in position cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement shall be paid separately) INCLUDING FORMWORK
Mix 1:4:8 Using 40 mm nominal size graded crushed coarse
aggregates | Cum | 6230.4 | 6230.4 | 36.7 | False | None | None | False | None | False | 228655.68 | 0 |
| 4086687 | 159117 | None | 004 | Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications.INCLUDING FORMWORK
M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates | Cum | 6915.7 | 6915.7 | 22.1 | False | None | None | False | None | False | 152836.97 | 0 |
| 4086688 | 159117 | None | 005 | Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. INCLUDING FORMWORK
M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates | Cum | 11824.01 | 11824.01 | 7.0 | False | None | None | False | None | False | 82768.07 | 0 |
| 4086689 | 159117 | None | 006 | Providing Coursed rubble masonry (second sort) with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) | Cum | 6825.5 | 6825.5 | 33.7 | False | None | None | False | None | False | 230019.35 | 0 |
| 4086690 | 159117 | None | 007 | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification.
Buildings | Tonne | 98402.7 | 98402.7 | 3.11 | False | None | None | False | None | False | 306032.397 | 0 |
| 4086691 | 159117 | None | 008 | Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. INCLUDING FORMWORK
M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates | Cum | 10432.95 | 10432.95 | 7.6 | False | None | None | False | None | False | 79290.42 | 0 |
| 4086692 | 159117 | None | 009 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.INCLUDING FORMWORK
M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates | Cum | 11668.8 | 11668.8 | 5.54 | False | None | None | False | None | False | 64645.152 | 0 |
| 4086693 | 159117 | None | 010 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. | Sqm | 1441.0 | 1441.0 | 263.1 | False | None | None | False | None | False | 379127.1 | 0 |
| 4086694 | 159117 | None | 011 | Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. | Kgs | 124.3 | 124.3 | 3260.0 | False | None | None | False | None | False | 405218.0 | 0 |
| 4086695 | 159117 | None | 012 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 g/m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 m or as desired by Engineer- in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | Sqm | 624.8 | 624.8 | 327.0 | False | None | None | False | None | False | 204309.6 | 0 |
| 4086696 | 159117 | None | 013 | Providing and fixing aluminium sheet roofing accessories 0.60 mm (+0.05 %) total coated thickness, Zinc coating 120 g/m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Gutter (600 mm over all girth) | Rmtr | 1181.4 | 1181.4 | 36.0 | False | None | None | False | None | False | 42530.4 | 0 |
| 4086697 | 159117 | None | 014 | Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates.INCLUDING FORMWORK | Cum | 10027.76 | 10027.76 | 2.0 | False | None | None | False | None | False | 20055.52 | 0 |
| 4086698 | 159117 | None | 015 | Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications.
M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregatesINCLUDING FORMWORK | Cum | 6915.7 | 6915.7 | 16.0 | False | None | None | False | None | False | 110651.2 | 0 |
| 4086699 | 159117 | None | 016 | Providing & fixing of 2-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having a overall size of 60mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm X 58mm with GI reinforcement of 1mm for the frame and 1.5 mm for the sash. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24mm. Windows shall be provided with 5mm plain float glass, standard hardware& single point locking system with touch lock. Wall thickness of frame & sash shall be of 2-2.5 mm. Maximum possible size - 1819mm x 1819mm (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) | Sqm | 5929.0 | 5929.0 | 18.0 | False | None | None | False | None | False | 106722.0 | 0 |
| 4086700 | 159117 | None | 017 | Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size - 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) | Sqm | 6290.9 | 6290.9 | 7.5 | False | None | None | False | None | False | 47181.75 | 0 |
| 4086701 | 159117 | None | 018 | Providing and laying in position cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement shall be paid separately)INCLUDING FORMWORK
Mix 1:2:4 Using 20 mm nominal size graded crushed coarse aggregates | Cum | 6867.3 | 6867.3 | 11.2 | False | None | None | False | None | False | 76913.76 | 0 |
| 4086702 | 159117 | None | 019 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. | Sqm | 1214.4 | 1214.4 | 30.5 | False | None | None | False | None | False | 37039.2 | 0 |
| 4086703 | 159117 | None | 020 | Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 324.5 | 324.5 | 305.0 | False | None | None | False | None | False | 98972.5 | 0 |
| 4086704 | 159117 | None | 021 | Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per direc- tions of Engineer-in-charge. | Sqm | 389.4 | 389.4 | 481.0 | False | None | None | False | None | False | 187301.4 | 0 |
| 4086705 | 159117 | None | 022 | Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. | Cum | 151881.4 | 151881.4 | 0.08 | False | None | None | False | None | False | 12150.512 | 0 |
| 4086706 | 159117 | None | 023 | Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long brackets of 15x15mm M.S Square tube, the entire door frame to be reinforced with 19x19mm M.S Square tube of 19 gauge. The door frame to be fixed to the wall using M.S. Screws of 65/80mm size complete as per manufacturers specification & direction of Engineer-in-charge. | Rmtr | 349.8 | 349.8 | 18.3 | False | None | None | False | None | False | 6401.34 | 0 |
| 4086707 | 159117 | None | 024 | Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Prelaminated PVC C Channel of 5mm thick sheet & 30x50mm wide to form stiles & 5mm thick & 75mm wide Prelaminated PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet Prelaminated on either side fitted in the M.S. frame, Sealed to the stiles & rails with PVC Designer beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75mm Aluminium hinges. with both side prelam | Sqm | 2602.6 | 2602.6 | 5.7 | False | None | None | False | None | False | 14834.82 | 0 |
| 4086708 | 159117 | None | 025 | Providing and fixing in position fully panelled Honne wood shutters for doors with , stiles and rails of 35mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. (excluding cost of fixtures) | Sqm | 7793.5 | 7793.5 | 2.45 | False | None | None | False | None | False | 19094.075 | 0 |
| 4086709 | 159117 | None | 026 | Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 80x1.25 mm M.S. laths with 1.25 mm thick top cover including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. | Sqm | 2896.3 | 2896.3 | 5.8 | False | None | None | False | None | False | 16798.54 | 0 |
| 4086710 | 159117 | None | 027 | Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 g/L and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 L/ 10 m². Over and including priming coat of exterior primer applied @ 0.90 L/10 m² with paint of approved quality to give an ven shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 171.6 | 171.6 | 305.0 | False | None | None | False | None | False | 52338.0 | 0 |
| 4086711 | 159117 | None | 028 | Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 191.4 | 191.4 | 481.0 | False | None | None | False | None | False | 92063.4 | 0 |
| 4086712 | 159117 | None | 029 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding | Kgs | 184.8 | 184.8 | 576.0 | False | None | None | False | None | False | 106444.8 | 0 |
| 4086713 | 159117 | None | 030 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including one coat of primer ,preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 126.5 | 126.5 | 133.0 | False | None | None | False | None | False | 16824.5 | 0 |
| 4086714 | 159117 | None | 031 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thick- ness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete. | Sqm | 977.9 | 977.9 | 14.0 | False | None | None | False | None | False | 13690.6 | 0 |
| 4086715 | 159117 | None | 032 | Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per m2 including pointing in white cement mixed with pigment of matching shade complete. | Sqm | 1216.6 | 1216.6 | 58.0 | False | None | None | False | None | False | 70562.8 | 0 |
| 4086716 | 159117 | None | 033 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20 mm nominal dia pipes | Rmtr | 416.9 | 416.9 | 30.0 | False | None | None | False | None | False | 12507.0 | 0 |
| 4086717 | 159117 | None | 034 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 20 mm nominal dia Pipes | Rmtr | 238.7 | 238.7 | 30.0 | False | None | None | False | None | False | 7161.0 | 0 |
| 4086718 | 159117 | None | 035 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 32 mm nominal dia Pipes | Rmtr | 409.2 | 409.2 | 57.2 | False | None | None | False | None | False | 23406.24 | 0 |
| 4086719 | 159117 | None | 036 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 40 mm nominal dia Pipes | Rmtr | 524.7 | 524.7 | 50.0 | False | None | None | False | None | False | 26235.0 | 0 |
| 4086720 | 159117 | None | 037 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. | Ltr | 9.9 | 9.9 | 1000.0 | False | None | None | False | None | False | 9900.0 | 0 |
| 4086721 | 159117 | None | 038 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid | No. | 5321.8 | 5321.8 | 1.0 | False | None | None | False | None | False | 5321.8 | 0 |
| 4086722 | 159117 | None | 039 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests | No. | 5372.4 | 5372.4 | 1.0 | False | None | None | False | None | False | 5372.4 | 0 |
| 4086723 | 159117 | None | 040 | Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required : Single half stall urinal with 5 litre P.V.C. automatic flushing cistern | No. | 9506.2 | 9506.2 | 2.0 | False | None | None | False | None | False | 19012.4 | 0 |
| 4086724 | 159117 | None | 041 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm
C.P. brass pillar taps | No. | 3152.6 | 3152.6 | 2.0 | False | None | None | False | None | False | 6305.2 | 0 |
| 4086725 | 159117 | None | 042 | Providing and fixing Bib cock with wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete Class Economy | No. | 1228.7 | 1228.7 | 6.0 | False | None | None | False | None | False | 7372.2 | 0 |
| 4086726 | 159117 | None | 043 | Providing and fixing Angle cock medium with wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class Economy | No. | 1122.0 | 1122.0 | 5.0 | False | None | None | False | None | False | 5610.0 | 0 |
| 4086727 | 159117 | None | 044 | Providing and fixing Health faucet | No. | 715.0 | 715.0 | 1.0 | False | None | None | False | None | False | 715.0 | 0 |
| 4086728 | 159117 | None | 045 | Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber 100mm x 100mm size P type with Non Modular common burnt clay bricks of designation 3.5& water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: | No. | 2785.2 | 2785.2 | 2.0 | False | None | None | False | None | False | 5570.4 | 0 |
| 4086729 | 159117 | None | 046 | Providing and fixing PVC (S.W.R) Nahani Trap 10cms x 10cms with all fitting arrangements & all necessary accessories complete | No. | 242.0 | 242.0 | 6.0 | False | None | None | False | None | False | 1452.0 | 0 |
| 4086730 | 159117 | None | 047 | Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: Inside dimensions 455x610 mm and 45 cm deep for single pipe line : With common urnt clay (non modular) bricks of class designation 3.5 | No. | 6206.2 | 6206.2 | 3.0 | False | None | None | False | None | False | 18618.6 | 0 |
| 4086731 | 159117 | None | 048 | Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 75mm nominal dia pipes | Rmtr | 317.9 | 317.9 | 18.0 | False | None | None | False | None | False | 5722.2 | 0 |
| 4086732 | 159117 | None | 049 | Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 110 m nominal dia pipes | Rmtr | 423.5 | 423.5 | 45.0 | False | None | None | False | None | False | 19057.5 | 0 |
| 4086733 | 159117 | None | 050 | Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5 m. Including cost of all labour complete as per specifications | Cum | 176.0 | 176.0 | 115.0 | False | None | None | False | None | False | 20240.0 | 0 |
| 4086734 | 159117 | None | 051 | Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. | Cum | 476.3 | 476.3 | 123.0 | False | None | None | False | None | False | 58584.9 | 0 |
| 4086735 | 159117 | None | 052 | Providing and fixing PTMT grating of approved quality and colour. Circular type 100 mm nominal dia | No. | 45.1 | 45.1 | 6.0 | False | None | None | False | None | False | 270.6 | 0 |
| 4086736 | 159117 | None | 053 | Providing and laying 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick M 20 mix cement concrete (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 L per 50 kg of cement with red oxide finish etc ., coplete as per direction of Engineer incharge. | Sqm | 880.0 | 880.0 | 160.0 | False | None | None | False | None | False | 140800.0 | 0 |
| 4086737 | 159117 | None | 054 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i)
Single socketed and 135 degree shoe, pipes 100 mm diameter | Rmtr | 320.1 | 320.1 | 34.0 | False | None | None | False | None | False | 10883.4 | 0 |
| 4086738 | 159117 | None | 055 | Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete.
Size of Tile 600x600 mm | Sqm | 1259.5 | 1259.5 | 52.0 | False | None | None | False | None | False | 65494.0 | 0 |
| 4086739 | 159117 | None | 056 | Making soak pit 2.5 m diameter 3.0 m deep with 45 x 45 cm dry brick honey comb shaft with bricks and PVC S.W.R drain pipe 100 mm diameter, 1.8 m long complete as per standard design.With common burnt clay (non modular) bricks of class designation 3.5 | No | 25326.4 | 25326.4 | 1.0 | False | None | None | False | None | False | 25326.4 | 0 |
| 4086740 | 159117 | None | 057 | Providing and fixing white vitreous china laboratory sink with C.I. brackets,
C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required : Size 600x450x200 mm | Each | 5590.2 | 5590.2 | 3.0 | False | None | None | False | None | False | 16770.6 | 0 |
| 4086741 | 159117 | None | 058 | LT ELECTRICAL WORKS Open Conduit System: Supplying heavy gauge PVC conduit pipe ....... dia ....... mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc, and fixing using inverted wood plugs in case of RCC ceiling and RCC wall / stone structure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws. 25 mm dia 2 mm thick | Mtr | 81.0 | 81.0 | 70.0 | False | None | None | False | None | False | 5670.0 | 0 |
| 4086742 | 159117 | None | 059 | Concealed conduit System: Supplying heavy gauge PVC conduit pipe……mm dia thick confirming to IS 2509 with suitable size bends, metal/ PVC junction boxes, adhesive paste etc., and running before concreating the slab . The conduit should be tied to the reinforcement rods by using bending wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary 25 mm dia 2 mm thick | Mtr | 78.0 | 78.0 | 210.0 | False | None | None | False | None | False | 16380.0 | 0 |
| 4086743 | 159117 | None | 060 | Supplying and fixing PVC/metal conduit Deep junction box 25 mm deep Junction box | Each | 56.0 | 56.0 | 40.0 | False | None | None | False | None | False | 2240.0 | 0 |
| 4086744 | 159117 | None | 061 | Extra for Groove cutting in brick wall/cc floor to the suitable depth for concealing of Conduit/GI pipe and plastering, finishing the wall upto wall surface complete. upto 50mm conduit CC floor | Mtr | 69.0 | 69.0 | 120.0 | False | None | None | False | None | False | 8280.0 | 0 |
| 4086745 | 159117 | None | 062 | Point wiring using copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit/casing caping using 1100V Grade, COPPER conductor flexible multistrand FRLS PVC insulated, 2X1.5Sqmm cable confirming to the GTP without switch, the other end of the wires shall be terminated with sufficient loose in a wood/PVC round block complete for each outlet.
Short point up to 3Mtr from tapping point to out let via switch box | Point | 269.0 | 269.0 | 8.0 | False | None | None | False | None | False | 2152.0 | 0 |
| 4086746 | 159117 | None | 063 | Point wiring using copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit/casing caping using 1100V Grade, COPPER conductor flexible multistrand FRLS PVC insulated, 2X1.5Sqmm cable confirming to the GTP without switch, the other end of the wires shall be terminated with sufficient loose in a wood/PVC round block complete for each outlet.
Medium point above 3Mtr up to 6Mtrs from tapping point to out let via switch box | Point | 379.0 | 379.0 | 10.0 | False | None | None | False | None | False | 3790.0 | 0 |
| 4086747 | 159117 | None | 064 | Point wiring using copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit/casing caping using 1100V Grade, COPPER conductor flexible multistrand FRLS PVC insulated, 2X1.5Sqmm cable confirming to the GTP without switch, the other end of the wires shall be terminated with sufficient loose in a wood/PVC round block complete for each outlet.
Long point above 6Mtr up to 10Mtr from tapping point to out let via switch box | Point | 555.0 | 555.0 | 25.0 | False | None | None | False | None | False | 13875.0 | 0 |
| 4086748 | 159117 | None | 065 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694:2010
1 sqmm | Mtr | 19.0 | 19.0 | 50.0 | False | None | None | False | None | False | 950.0 | 0 |
| 4086749 | 159117 | None | 066 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694:2010
1.5 sqmm | Mtr | 26.0 | 26.0 | 510.0 | False | None | None | False | None | False | 13260.0 | 0 |
| 4086750 | 159117 | None | 067 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694:2010
2.5 sqmm | Mtr | 42.0 | 42.0 | 460.0 | False | None | None | False | None | False | 19320.0 | 0 |
| 4086751 | 159117 | None | 068 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694:2010
4 sqmm | Mtr | 63.0 | 63.0 | 150.0 | False | None | None | False | None | False | 9450.0 | 0 |
| 4086752 | 159117 | None | 069 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694:2010
6 sqmm | Mtr | 92.0 | 92.0 | 210.0 | False | None | None | False | None | False | 19320.0 | 0 |
| 4086753 | 159117 | None | 070 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall
1-2 Way | Each | 138.0 | 138.0 | 3.0 | False | None | None | False | None | False | 414.0 | 0 |
| 4086754 | 159117 | None | 071 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 3 Way | Each | 159.0 | 159.0 | 8.0 | False | None | None | False | None | False | 1272.0 | 0 |
| 4086755 | 159117 | None | 072 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall
4-5 Way | Each | 177.0 | 177.0 | 2.0 | False | None | None | False | None | False | 354.0 | 0 |
| 4086756 | 159117 | None | 073 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall
8 Way | Each | 261.0 | 261.0 | 2.0 | False | None | None | False | None | False | 522.0 | 0 |
| 4086757 | 159117 | None | 074 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall
16 Way | Each | 363.0 | 363.0 | 2.0 | False | None | None | False | None | False | 726.0 | 0 |
| 4086758 | 159117 | None | 075 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/ metal PVC box.
1 to 2 Module | Each | 137.0 | 137.0 | 3.0 | False | None | None | False | None | False | 411.0 | 0 |
| 4086759 | 159117 | None | 076 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/ metal PVC box.
3 Module | Each | 161.0 | 161.0 | 8.0 | False | None | None | False | None | False | 1288.0 | 0 |
| 4086760 | 159117 | None | 077 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/ metal PVC box.
4 Module | Each | 175.0 | 175.0 | 2.0 | False | None | None | False | None | False | 350.0 | 0 |
| 4086761 | 159117 | None | 078 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/ metal PVC box.
8 Module | Each | 284.0 | 284.0 | 2.0 | False | None | None | False | None | False | 568.0 | 0 |
| 4086762 | 159117 | None | 079 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/ metal PVC box.
16 Module | Each | 397.0 | 397.0 | 2.0 | False | None | None | False | None | False | 794.0 | 0 |
| 4086763 | 159117 | None | 080 | Supplying and fixing of modular switch/Socket/stepped electronic fan regulator/dimmer/telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293
6 Amps one way Switch | Each | 102.0 | 102.0 | 45.0 | False | None | None | False | None | False | 4590.0 | 0 |
| 4086764 | 159117 | None | 081 | Supplying and fixing of modular switch/Socket/stepped electronic fan regulator/dimmer/telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293
6 Amps Three way socket | Each | 171.0 | 171.0 | 4.0 | False | None | None | False | None | False | 684.0 | 0 |
| 4086765 | 159117 | None | 082 | Supplying and fixing of modular switch/Socket/stepped electronic fan regulator/dimmer/telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293
Stepped fan regulator Two Module | Each | 357.0 | 357.0 | 9.0 | False | None | None | False | None | False | 3213.0 | 0 |
| 4086766 | 159117 | None | 083 | Supplying and fixing of modular switch/Socket/stepped electronic fan regulator/dimmer/telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293
16 Amps one way Switch | Each | 180.0 | 180.0 | 8.0 | False | None | None | False | None | False | 1440.0 | 0 |
| 4086767 | 159117 | None | 084 | Supplying and fixing of modular switch/Socket/stepped electronic fan regulator/dimmer/telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293
6/16 Amps Universal Socket | Each | 236.0 | 236.0 | 8.0 | False | None | None | False | None | False | 1888.0 | 0 |
| 4086768 | 159117 | None | 085 | Supplying and fixing of modular switch/Socket/stepped electronic fan regulator/dimmer/telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293
TV/Telephone Socket | Each | 156.0 | 156.0 | 1.0 | False | None | None | False | None | False | 156.0 | 0 |
| 4086769 | 159117 | None | 086 | Supplying and fixing of modular switch/Socket/stepped electronic fan regulator/dimmer/telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293
RJ45/I.O Outlet Cat-6 | Each | 337.0 | 337.0 | 3.0 | False | None | None | False | None | False | 1011.0 | 0 |
| 4086770 | 159117 | None | 087 | Supplying and fixing of metal clad industrial plugs and sockets. 3pole+earth 440V SOCKET 32A | Each | 827.82 | 827.82 | 2.0 | False | None | None | False | None | False | 1655.64 | 0 |
| 4086771 | 159117 | None | 088 | Supplying and fixing miniature circuit breakers on existence MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.
6-32 Amps SP | Each | 415.0 | 415.0 | 9.0 | False | None | None | False | None | False | 3735.0 | 0 |
| 4086772 | 159117 | None | 089 | Supplying and fixing miniature circuit breakers on existence MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.
6-32 Amps DP | Each | 739.0 | 739.0 | 1.0 | False | None | None | False | None | False | 739.0 | 0 |
| 4086773 | 159117 | None | 090 | Supplying and fixing miniature circuit breakers on existence MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.
40 Amps DP | Each | 1060.0 | 1060.0 | 3.0 | False | None | None | False | None | False | 3180.0 | 0 |
| 4086774 | 159117 | None | 091 | Supplying and fixing miniature circuit breakers on existence MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.
50-63 Amps TPN | Each | 3080.0 | 3080.0 | 4.0 | False | None | None | False | None | False | 12320.0 | 0 |
| 4086775 | 159117 | None | 092 | Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB'S single phase / 3 phase / single door with powder coated painting. Made out of 14 SWG MS Enclosure.
8 Way SP & N Double Door | Each | 1854.0 | 1854.0 | 1.0 | False | None | None | False | None | False | 1854.0 | 0 |
| 4086776 | 159117 | None | 093 | Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB'S single phase / 3 phase / single door with powder coated painting. Made out of 14 SWG MS Enclosure.
8 Way TP & N Double Door | Each | 6091.0 | 6091.0 | 1.0 | False | None | None | False | None | False | 6091.0 | 0 |
| 4086777 | 159117 | None | 094 | Supplying & Fixing Chemical earthling for grounding. Conduits, IC cutouts & other equipments backfill compound which is non-corrosive, thermally conductive, potential to permissible limits, superior Fault conduction capacity, non toxic, weather resistance & capable of achieving ohmic value less than one ohm Using 6ft. Copper bonded rod with backfill compound | Kit | 6230.0 | 6230.0 | 1.0 | False | None | None | False | None | False | 6230.0 | 0 |
| 4086778 | 159117 | None | 095 | Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 25x3mm Copper Strip | Mtr | 570.0 | 570.0 | 8.0 | False | None | None | False | None | False | 4560.0 | 0 |
| 4086779 | 159117 | None | 096 | Supplying and fixing Electronic Trivector Meter (ETV) suitable for operation LT operation and - CT operated meter in polycarbonate body in class 0.5 accuracy as per IS 14697 and completely wired. | Each | 4390.0 | 4390.0 | 1.0 | False | None | None | False | None | False | 4390.0 | 0 |
| 4086780 | 159117 | None | 097 | Supplying, fixing and wiring 50/5 to 400/5A 5VA burden Current Transformer Class 0.5 accuracy with Tape Wound. | Each | 562.0 | 562.0 | 4.0 | False | None | None | False | None | False | 2248.0 | 0 |
| 4086781 | 159117 | None | 098 | Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50cycles. Single phase AC supply conforming to ISS-374-1979 and with double ball bearing system. 48" Sweep (1200mm ) Regular model | Each | 2984.0 | 2984.0 | 9.0 | False | None | None | False | None | False | 26856.0 | 0 |
| 4086782 | 159117 | None | 099 | Supplying of 1440 RPM Heavy duty exhaust fan of 300mm (12") size with bracket blades complete for light duty suitable for operate 230V 50Hz, AC supply. | Each | 1492.0 | 1492.0 | 2.0 | False | None | None | False | None | False | 2984.0 | 0 |
| 4086783 | 159117 | None | 100 | Fabricating supplying and mounting MS box made out ....SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clA with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour etc., complete. 14 SWG | Sq CM | 0.5 | 0.5 | 51935.0 | False | None | None | False | None | False | 25967.5 | 0 |
| 4086784 | 159117 | None | 101 | Supplying and fixing angle iron frame work fabricated out of M.S. angle iron… and M S flat …….. With bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. 75x75x6mm | Mtr | 555.0 | 555.0 | 4.0 | False | None | None | False | None | False | 2220.0 | 0 |
| 4086785 | 159117 | None | 102 | Supplying ……. A rated 3 phase with neutral bus bar using requred capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are mounted on powder coated 40x6mm M S flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete. 100 Amps 4x30x6mm Aluminum Strips. | Mtr | 2465.0 | 2465.0 | 15.0 | False | None | None | False | None | False | 36975.0 | 0 |
| 4086786 | 159117 | None | 103 | Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50Hz AC with latest microcontroller based, digital read out of percentage leakage current, programmable delay/auto/ manual reset facility suitable to mount on DIN rail / flush mounting panel board. | Each | 9255.0 | 9255.0 | 1.0 | False | None | None | False | None | False | 9255.0 | 0 |
| 4086787 | 159117 | None | 104 | Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440V AC. 50Hz 12/24V DC. | Each | 515.0 | 515.0 | 6.0 | False | None | None | False | None | False | 3090.0 | 0 |
| 4086788 | 159117 | None | 105 | Supplying, fixing and wiring 3 phase Digital Ammeter / Voltmeter. | Each | 1425.0 | 1425.0 | 3.0 | False | None | None | False | None | False | 4275.0 | 0 |
| 4086789 | 159117 | None | 106 | Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuit in Thermal Magnetic Release. Micro processor release shall have Earth Fault as per IS-13947. (Icu=100% lcs). In 4P MCCB, all Poles should have protection for Short-Cicrcuit/Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB. MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism.
THREE POLE 100Amps 25kA MCCB | Each | 6086.0 | 6086.0 | 2.0 | False | None | None | False | None | False | 12172.0 | 0 |
| 4086790 | 159117 | None | 107 | Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuit in Thermal Magnetic Release. Micro processor release shall have Earth Fault as per IS-13947. (Icu=100% lcs). In 4P MCCB, all Poles should have protection for Short-Cicrcuit/Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB. MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism.
FOUR POLE 125 Amps 25kA | Each | 10341.0 | 10341.0 | 1.0 | False | None | None | False | None | False | 10341.0 | 0 |
| 4086791 | 159117 | None | 108 | Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuit in Thermal Magnetic Release. Micro processor release shall have Earth Fault as per IS-13947. (Icu=100% lcs). In 4P MCCB, all Poles should have protection for Short-Cicrcuit/Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB. MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism.
FOUR POLE 250Amps 25kA MCCB | Each | 21391.0 | 21391.0 | 1.0 | False | None | None | False | None | False | 21391.0 | 0 |
| 4086792 | 159117 | None | 109 | Supplying of 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 25 Sqmm, 4 Core, (13 GI Strips - 4 x 0.8 mm) | Mtr | 179.84 | 179.84 | 45.0 | False | None | None | False | None | False | 8092.8 | 0 |
| 4086793 | 159117 | None | 110 | Supplying of 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 50 Sqmm, 3.5 Core, (16 GI Strips - 4 x 0.8 mm) | Mtr | 178.97 | 178.97 | 10.0 | False | None | None | False | None | False | 1789.7 | 0 |
| 4086794 | 159117 | None | 111 | Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and rolling and lowering into trenches, laying true to line and jointing of pipes and specials with electrofusion welding, giving hydraulic test as per relevant ISS with all lead and lifts including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excation, testing and commissioning. The rate is exclusive of required specials and fittings wherever necessary like saddle Tee, stub ends, flanged sets, bedns, reducers etc. complete (Contractor will make his own arrangements for procuring water for testing) etc. Note: Upto 110mm dia Coil shall be used. For Grade PE80 PN6.0 : HDPE Grade PE80-PN6.0, 63mm dia | Mtr | 207.9 | 207.9 | 40.0 | False | None | None | False | None | False | 8316.0 | 0 |
| 4086795 | 159117 | None | 112 | Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, including dressing of excavated surfaces, disposing off or leveling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m. Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering and lift upto 1.5 m including cost of labour, tools, usage& other appurtenances required to complete the work. In all kinds of soils. Depth upto 1.50m | Cum | 532.4 | 532.4 | 28.5 | False | None | None | False | None | False | 15173.4 | 0 |
| 4086796 | 159117 | None | 113 | Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5 m. Including cost of all labour complete as per specifications. | Cum | 176.0 | 176.0 | 28.5 | False | None | None | False | None | False | 5016.0 | 0 |
| 4086797 | 159117 | None | 114 | Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff LT Cable 2.5 to 25 Sqmm | Mtr | 20.88 | 20.88 | 45.0 | False | None | None | False | None | False | 939.6 | 0 |
| 4086798 | 159117 | None | 115 | Heavy Duty Copper Terminal Long Barrel 25 Sqmm Copper Terminal, Apprx Wt: 11 Gm | No | 27.0 | 27.0 | 6.0 | False | None | None | False | None | False | 162.0 | 0 |
| 4086799 | 159117 | None | 116 | Supplying of .....feet -PVC Batten with integrated LED tube .... W with high quality diffuser with life of 25000 burning hours & 70% lumen maintenance with CRI Greater than 80. Power Input : 220-240V @ 50/60 Hz & power factor Greater than 0.9 along with CE approved. 2 years warranty against any manufacturing defect working under standard lectrical condition.
LED light fitting 1 x 2' - 9/10 W | Each | 551.0 | 551.0 | 2.0 | False | None | None | False | None | False | 1102.0 | 0 |
| 4086800 | 159117 | None | 117 | Supplying of .....feet -PVC Batten with integrated LED tube .... W with high quality diffuser with life of 25000 burning hours & 70% lumen maintenance with CRI Greater than 80. Power Input : 220-240V @ 50/60 Hz & power factor Greater than 0.9 along with CE approved. 2 years warranty against any manufacturing defect working under standard lectrical condition.
LED light fitting 1 x 4' - 20/22 W | Each | 690.0 | 690.0 | 17.0 | False | None | None | False | None | False | 11730.0 | 0 |
| 4086801 | 159117 | None | 118 | Fixing all types and all capacities fluorescent /false ceiling/spot light/CFL/LED fittings indoor on the wall / ceiling / rafters / girders using 23 / 0.00076 " twin twisted PVC insulated wires, required nos of round blocks and clamps. On wall / ceiling / Rafters / Girders | Each | 122.0 | 122.0 | 19.0 | False | None | None | False | None | False | 2318.0 | 0 |
| 4086802 | 159117 | None | 119 | Fixing a ceiling/wall mounting fan of all capacities and all types to the existing 'S' hook with fan regulator to the existing board together supplying and fixing a 5 amps ceiling rose, necessary length of 23 / 0.0076 inch PVC insulated twin twisted copper wire and wiring. | Each | 171.0 | 171.0 | 9.0 | False | None | None | False | None | False | 1539.0 | 0 |
| 4086803 | 159117 | None | 120 | Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts and a 5 amps, ceiling rose with sufficient length of 23/0.0076 inch PVC insulated twin core wire. | Each | 492.0 | 492.0 | 2.0 | False | None | None | False | None | False | 984.0 | 0 |
| 4086804 | 159117 | None | 121 | Supplying and drawing UT-CAT 6 LAN cable. | Mtr | 38.0 | 38.0 | 148.0 | False | None | None | False | None | False | 5624.0 | 0 |
| 4086805 | 159117 | None | 122 | Supplying and Drawing PVC flexible one pair telephone unarmoured tinned copper cable. 2 Pair | Mtr | 15.0 | 15.0 | 21.0 | False | None | None | False | None | False | 315.0 | 0 |