createdTs	None
version	None
createdDate	None
modifiedDate	None
noticeInvitingTenderDTO	createdTs 1727420722667 version 13 createdDate None modifiedDate None tenderType RFQ evaluationType TWO_COVER evaluationTypeText Two Cover invitingStrategy OPEN invitingStrategyText Open taxType INCLUSIVE_TAX tenderFee 1310.00 emd 104000.00 bidValueType ITEM_WISE bidValueTypeText Item wise tenderReceiptClose 14-10-2024 17:30:00 tenderQueryClose 10-10-2024 17:30:00 technicalBidOpen 16-10-2024 10:30:00 publishedDate 27-09-2024 12:41:55 publishedByPost DUDC_EE_DVG publishedByUser KPE11086 - K N SWAMY bidValidityPeriod 90 noOfCalls 4 preBidMeetingDate None preBidMeetingYn False preQualificationBidOpen None denominationType RUPEES denominationTypeText Rupees retenderedYn True percentageRateTypeText None contactPerson SWAMY K N splitEmdRequiredYn False emdBankGuarantee None emdCash None bgValidityPeriod None hideWeightage None multipleCurrencySelectionAllowedYn False isTechWeightageAllowed False highestBidderSelection False isVariableEmdAllowed None qcbsTenderYn None itemwiseEmdRequiredYn None sampleSubmissionDate None officeNumber 08192251168 mobileNumber 7829771485 tenderSupplierList None
tenderSchedule	createdTs 1727420722669 version 33 createdDate None modifiedDate None tenderNumber DMA/2023-24/BD/WORK_INDENT17675/CALL-4 title Office working PKs Boiler installation restroom partition,toilet construction with ramp,samudhaya bhavan continution work at Channagiri TMC Limit under nagarothana 4th phase description Office working PKs Boiler installation restroom partition,toilet construction with ramp,samudhaya bhavan continution work at Channagiri TMC Limit under nagarothana 4th phase category WORKS categoryText Works ecv 5200000.02 deptName Directorate of Municipal Administration status PUBLISHED statusText Published remarks None csrValue None ecvtenderYn False location 2184 locationName DMA District Urban Development Cell Davanagere provisionalAmount 5200000.0 groupOverheadTotal 805985.95 fileNumber DUDC/2/CR/1142/2021-22CHN
tenderSubEstimateList	createdTs version createdDate modifiedDate workCategoryName subEstimateName estimateTotal itemList 1727420723000 1 None None Buildings Office working PKs Boiler installation restroom partition,toilet construction with ramp,samudhaya bhavan continution work at Channagiri TMC Limit under nagarothana 4th phase 4394014.07 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 4092647 159368 None 1.14.1 Earth work excavation for Foundation by mechanical means for all works and depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting and stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery and other appurtenaces required to complete the work. Cum 105.06 105.06 127.96 False None None False None False 13443.4776 0 4092648 159368 None 2.1.2 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite or trap or basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead and lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. The cost of steel reinforcement and formwork sh B20all be paid separately. M7.5 Using 40 mm and down size graded crushed coarse aggregates. Cum 5833.92 5833.92 28.845 False None None False None False 168279.4224 0 4092649 159368 None 2.1.4 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite or trap or basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead and lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. The cost of steel reinforcement & formwork shall be paid separately Mix M10 Using 20 mm nominal size graded crushed coarse aggregates. Cum 6403.51 6403.51 1.764 False None None False None False 11295.79164 0 4092650 159368 None 2.2.1 Providing and laying in position Cement Concrete for all Foundation works. The granite or trap or basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead and lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications.M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 6475.61 6475.61 16.875 False None None False None False 109275.91875 0 4092651 159368 None 2.4.2 Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works and other parallel works from 0.50m to 3.50 m height. The granite or trap or basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead and lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 6512.69 6512.69 20.4 False None None False None False 132858.876 0 4092652 159368 None 2.2.3 Providing and laying in position Cement Concrete for all Foundation works. The granite or trap or basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead and lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. Cum 6526.08 6526.08 16.2 False None None False None False 105722.496 0 4092653 159368 None 1.1 Formwork 8 Percentage on finished rate of concrete per per cum For Footing Cum 518.05 518.05 10.709 False None None False None False 5547.79745 0 4092654 159368 None 1.2 Formwork 8 Percentage on finished rate of concrete per per cum For Footing Cum 522.09 522.09 8.1 False None None False None False 4228.929 0 4092655 159368 None 1.3 Formwork 50 Percentage on finished rate of concrete per per cum For Plinth Beam Cum 3237.81 3237.81 6.06 False None None False None False 19621.1286 0 4092656 159368 None 1.4 Formwork 50 Percentage on finished rate of concrete per per cum For Plinth Beam & Grade Beam Cum 3263.04 3263.04 8.1 False None None False None False 26430.624 0 4092657 159368 None 1.5 Formwork 60 Percentage on finished rate of concrete per per cum For Lintel Cum 3907.61 3907.61 2.55 False None None False None False 9964.4055 0 4092658 159368 None 2.5.2 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The granite or trap or basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead and lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. Cum 7048.29 7048.29 29.679 False None None False None False 209186.19891 0 4092659 159368 None 1.6 Formwork 70 Percentage on finished rate of concrete per cum For Column Cum 4558.88 4558.88 3.03 False None None False None False 13813.4064 0 4092660 159368 None 1.7 Formwork 70 Percentage on finished rate of concrete per cum For Column Cum 4933.8 4933.8 5.07 False None None False None False 25014.366 0 4092661 159368 None 1.9 Formwork 60 Percentage on finished rate of concrete per cum For Roof Beam Cum 4228.97 4228.97 6.26 False None None False None False 26473.3522 0 4092662 159368 None 1.10 Formwork 60 Percentage on finished rate of concrete per cum For Roof Beam Cum 3907.61 3907.61 2.76 False None None False None False 10785.0036 0 4092663 159368 None 1.11 Formwork 50 Percentage on finished rate of concrete per cum For Roof Slab Cum 3524.15 3524.15 13.35 False None None False None False 47047.4025 0 4092664 159368 None 1.12 Formwork 50 Percentage on finished rate of concrete per cum For Roof Slab Cum 3256.35 3256.35 5.01 False None None False None False 16314.3135 0 4092665 159368 None 1.13 Formwork 60 Percentage on finished rate of concrete per per cum For Lintel Cum 4228.97 4228.97 2.58 False None None False None False 10910.7426 0 4092666 159368 None 1.14 Formwork 45 Percentage on finished rate of concrete per cum For Chejja Cum 2930.71 2930.71 0.81 False None None False None False 2373.8751 0 4092667 159368 None 1.15 Formwork 45 Percentage on finished rate of concrete per cum For Chejja Cum 3171.73 3171.73 2.48 False None None False None False 7865.8904 0 4092668 159368 None 2.11 a Supplying, fitting and placing TMT FE 550 or 550D Steel Reinforcement including cost of all materials, machinery,labour, cleaning, straightening, cutting, bending, hooking, laping or welding joints, tying with binding wire or soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. t 92140.71 92140.71 6.765 False None None False None False 623331.90315 0 4092669 159368 None 1.8 Construction of Embankment by excavating the available approved Gravel or Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage and all other appurtenaces required to complete the work. Cum 488.22 488.22 152.18 False None None False None False 74297.3196 0 4092670 159368 None 1.2.2 Concealed Conduit System Supplying heavy gauge PVC conduit pipe mm dia. mm thick confirming to IS 2509 with suitable size bends, metal or PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary. 25 mm dia 2 mm thick. m 78.0 78.0 210.0 False None None False None False 16380.0 0 4092671 159368 None 6.7 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1 is to 4 1 cement 4 coarse sand including cost of all materials, labour, scaffolding and usage charges of machinery and other incidental charges complete as per the direction of engineer incharge of work. Cum 8457.33 8457.33 9.128 False None None False None False 77198.50824 0 4092672 159368 None 6.13 Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in foundations and plinth in Cement mortar 1 is to 4 1 cement 4 coarse sand including cost of all materials, labour, scaffolding and usage charges of machinery and other incidental charges complete as per the direction of engineer incharge of work. Cum 1005.28 1005.28 45.57 False None None False None False 45810.6096 0 4092673 159368 None 6.32 Providing and constructing load bearing wall with Solid Concrete blocksof size 400x200x200mm having block density more than 1800 kg per cum and minimum compressive strength of 4.00 N per sqmm conforming to IS 2185 Part I 2005 and constructed with CM 1 is to 4 as per IS 2572 2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. Sqm 1349.3 1349.3 87.57 False None None False None False 118158.201 0 4092674 159368 None 6.33 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800 kg per cum and minimum compressive strength of 4.00 N per sqmm conforming to IS 2185 Part I 2005 and constructed with CM 1 is to 4 as per IS 2572 2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. Sqm 1267.93 1267.93 289.08 False None None False None False 366533.2044 0 4092675 159368 None 6.34 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg per cum and minimum compressive strength of 4.00 N per sqmm conforming to IS 2185 Part I 2005 and constructed with CM 1 is to 4 as per IS 2572 2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. Sqm 1137.12 1137.12 37.62 False None None False None False 42778.4544 0 4092676 159368 None 11.34B Providing and fixing M.S. grills of required pattern in frames of win dows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings or wooden frames with rawl plugs screws etc. Kgs 188.49 188.49 787.29 False None None False None False 148396.2921 0 4092677 159368 None 20.2.1 Float glass panes of nominal thickness 4 mm weight not less than 10kg per sqm Sqm 843.57 843.57 2.43 False None None False None False 2049.8751 0 4092678 159368 None 8.1.1 Providing 12 mm cement plaster with cement mortar 1 is to 4 1 cement and 4 fine sand to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer incharge. Sqm 262.65 262.65 485.39 False None None False None False 127487.6835 0 4092679 159368 None 8.4.2 Providing 12 mm cement plaster finished with a floating coat of neat cement of mix 1 is to 4 1 cement is to 4 fine sand to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer incharge. Sqm 321.36 321.36 121.41 False None None False None False 39016.3176 0 4092680 159368 None 8.5.2 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix 1 is to 4 1 cement and 4 fine sand to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer incharge. Sqm 359.47 359.47 420.94 False None None False None False 151315.3018 0 4092681 159368 None 8.2.1 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1 is to 4 1 cement 4 fine sand including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer incharge. Sqm 303.85 303.85 239.93 False None None False None False 72902.7305 0 4092682 159368 None 9.22.2 Providing and laying Polished Glazed Vitrified tiles in floor with different sizes thickness to be specified by the manufacturer, with water absorption less than 0.08 percent and conforming to IS 15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive water based conforming to IS 15477, in average 6 mm thickness, including grouting of joints Payment for grouting of joints to be made separately.Size of Tile 600x600 mm Sqm 1365.78 1365.78 88.0 False None None False None False 120188.64 0 4092683 159368 None 9.9 Providing and laying Ceramic glazed floor tiles of size 300x300 mm thickness to be specified by the manufacturer of 1st quality conforming to IS 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1 is to 4 1 Cement and 4 Coarse sand, Jointing with grey cement slurry at 3.3 kg per sqm including pointing the joints with white cement and matching pigment etc., complete. Sqm 1108.28 1108.28 40.589 False None None False None False 44983.97692 0 4092684 159368 None 9.38 Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1 is to 3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. Sqm 1433.76 1433.76 132.209 False None None False None False 189555.97584 0 4092685 159368 None 8.39 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer incharge. Sqm 130.81 130.81 262.85 False None None False None False 34383.4085 0 4092686 159368 None 8.35.2 Painting with Silicon and Acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces :Two coats with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer incharge. Sqm 203.94 203.94 472.93 False None None False None False 96449.3442 0 4092687 159368 None 8.30 Finishing walls with Acrylic Smooth exterior paint of required shade New work Two coat applied at 1.67L per 10 sqm over and including priming coat of exterior primer applied at 2.20 kg per 10 sqm with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer incharge. Sqm 179.22 179.22 401.94 False None None False None False 72035.6868 0 4092688 159368 None 8.51 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. Sqm 103.0 103.0 518.78 False None None False None False 53434.34 0 4092689 159368 None 8.34.1 Applying priming coat With ready mixed pink or Grey primer of approved brand and manufacture on wood work hard and soft wood including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer in charge. Sqm 54.59 54.59 8.19 False None None False None False 447.0921 0 4092690 159368 None 8.64 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer incharge. Sqm 78.28 78.28 8.19 False None None False None False 641.1132 0 4092691 159368 None 12.13.2 Providing Red Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves excluding cost of cement concrete and side clamps, but including cost of materials, labour, usage charges complete as per specifications. Cum 102588.0 102588.0 0.161 False None None False None False 16516.668 0 4092692 159368 None 12.57.1 Providing and fixing flush door shutter made out of solid core blockboard type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets core veneer hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 part I 1991. from manufacturer complete as per spcification.do- 30 mm thick both side commercial Sqm 4164.29 4164.29 5.67 False None None False None False 23611.5243 0 4092693 159368 None 12.57.4 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets(core veneer hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 part I 1991. from manufacturer complete as per spcification. do 35 mm thick both side Teak. Sqm 4667.96 4667.96 8.19 False None None False None False 38230.5924 0 4092694 159368 None 12.51 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1 is to 3 is to 6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. No 1046.48 1046.48 8.0 False None None False None False 8371.84 0 4092695 159368 None 12.52 Fixing of window frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1 is to 3 is to 6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. No 796.19 796.19 4.0 False None None False None False 3184.76 0 4092696 159368 None 12.12 Providing Mathi or Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves excluding cost of cement concrete and side clamps , but including cost of materials, labour, usage charges complete as per specifications. Cum 127928.06 127928.06 0.71 False None None False None False 90828.9226 0 4092697 159368 None 12.18 Providing and fixing in position fully panelled Matti or Nandi wood shutters for doors with, stiles and rails of 35mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. excluding cost of fixtures. Sqm 6773.28 6773.28 4.1 False None None False None False 27770.448 0 4092698 159368 None 12.37 Providing and fixing in position Mathi or Nandi wood half panelled shutters at bottom and half glazed at top for window shutters with stiles and rails of 35mm thick, 75mm wide in two halves with panels of 25mm thick, 3mm thick reeded glass for top panels fixed with wooden beading including cost of materials, labour charges, usage charges complete as per specifications. excluding cost of fixtures. Sqm 6649.68 6649.68 5.58 False None None False None False 37105.2144 0 4092699 159368 None 11.11.1 Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side or top or centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, sectional weight of only steel members shall be measured for payment. Sqm 152.44 152.44 93.7 False None None False None False 14283.628 0 4092700 159368 None 12.54 Providing and fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners and jointed 2 No.s of 150mm long brackets of 15x15mm M.S Square tube, the entire door frame to be reinforced with 19x19mm M.S Square tube of 19 gauge. The door frame to be fixed to the wall using M.S. Screws of 65 or 80mm size complete as per manufacturers specification and direction of Engineer incharge. m 327.54 327.54 95.0 False None None False None False 31116.3 0 4092701 159368 None 12.53 Providing and fixing 30mm thick factory made rigid foam Panelled Door Shutters made from M.S. tube of 19 gauge thickness, size 19x19mm for stiles and 15x15mm for top and bottom rails, covered with heat moulded PVC C channel of 5mm thick sheet and 30 x 50mm wide to form stiles and mm thick and 75mm wide PVC Sheets for top rail, lock rail and bottom rail on either side and 5mm thick 20mm wide PVC sheet as gap insert for top rail and bottom rail, Panelling of 5mm thick PVC sheet fitted in the M.S. Frame, Sealed to the stiles and rails with 5x30mm PVC sheet beading on either side and joined together with solvent cement adhesive etc., Complete as per manufacturers specification and direction of Engineer incharge fixed to frames with 3 nos of 75 mm Aluminium hinges. Sqm 1635.64 1635.64 31.839 False None None False None False 52077.14196 0 4092702 159368 None 8.46 French spirit polishing Two coats on new works including a coat of wood filler to give an even surface including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering smooth, cost of materials, labour complete as per specifications and as per directions of Engineer incharge. Sqm 303.85 303.85 11.2 False None None False None False 3403.12 0 4092703 159368 None 11.26.3 Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. G.I. pipes in cluding cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer in Charge. Sqm 188.49 188.49 170.5 False None None False None False 32137.545 0 4092704 159368 None 12.68.2 Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. 100x58x1.9mm. Each 44.29 44.29 25.0 False None None False None False 1107.25 0 4092705 159368 None 12.63 Providing and fixing aluminium tower bolts, ISI marked, anodised an odic coating not less than grade AC 10 as per IS 1868 transparent or dyed to required colour or shade, with necessary screws etc. complete. Each 133.9 133.9 18.0 False None None False None False 2410.2 0 4092706 159368 None 12.79.2 Providing and fixing bright finished brass handles with screws etc. complete Brass handles 100 mm with plate 150x32 mm. Each 237.93 237.93 14.0 False None None False None False 3331.02 0 4092707 159368 None 8.33.3 Painting Steel work with Deluxe Multi Surface Paint to give an evenshade. Two coat applied at 0.90 ltr per 10 sqm over an under coat of primerapplied at 0.80 ltr per 10 sqm of approved brand and manufacture includingpreparing the surface after thorougly cleaning oil, grease, dirt and foreignmatter, cost of materials, labour complete as per specifications and asper directions of Engineer incharge. Sqm 143.17 143.17 54.07 False None None False None False 7741.2019 0 4092708 159368 None 13.31.3 Providing and fixing Chlorinated polyvinyl chloride CPVC pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fitting this includes jointing of pipes and fittings with one step CPVC solvent cement ,trenching,refilling and testing of joinits complete as per direction of engineer in charge. 25mmOuter dia. m 327.54 327.54 300.0 False None None False None False 98262.0 0 4092709 159368 None 13.31.2 Providing and fixing Chlorinated polyvinyl chloride CPVC pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fitting this includes jointing of pipes and fittings with one step CPVC solvent cement ,trenching,refilling and testing of joinits complete as per direction of engineer in charge. 25mmOuter dia.20mmOuter dia m 249.26 249.26 205.0 False None None False None False 51098.3 0 4092710 159368 None 13.12 Providing and fixing C.P. brass bib cock of approved quality conforming to IS 8931 No 654.05 654.05 16.0 False None None False None False 10464.8 0 4092711 159368 None 13.15 Providing and fixing C.P. brass stop cock concealed of standard design and of approved make conforming to IS 8931. No 746.75 746.75 10.0 False None None False None False 7467.5 0 4092712 159368 None 14.7.1 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps. Each 3174.46 3174.46 3.0 False None None False None False 9523.38 0 4092713 159368 None 14.8 Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. Each 1465.69 1465.69 3.0 False None None False None False 4397.07 0 4092714 159368 None 14.89a Providing and fixing Towel rail 600mm length made of Stainless steel with all concealed fitting arrangements and all necessary accesories complete. Class a. Economy No 1299.86 1299.86 3.0 False None None False None False 3899.58 0 4092715 159368 None 14.32.2 Providing and fixing mirror of superior glass of approved quality and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular shape 453x357 mm. No 1048.54 1048.54 3.0 False None None False None False 3145.62 0 4092716 159368 None 14.2.1 Providing and fixing white vitreous china pedestal type water closet European type W.C. pan with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device handle lever, conforming to IS 7231, with all fittings and fix tures complete, including cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid. Each 4983.14 4983.14 3.0 False None None False None False 14949.42 0 4092717 159368 None 14.79 a Providing and fixing Single flow hand showers with Anti lime jets with 1.5m Extendable flexible tube, holder and wall flange made of Stainless steel with all concealed fitting arrangements and all necessary accesories complete. Class a. Economy Each 1362.69 1362.69 3.0 False None None False None False 4088.07 0 4092718 159368 None 14.1.1 Providing and fixing water closet squatting pan Indian type W.C. pan with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device handle lever conforming to IS 7231, with all fittings and fix tures complete, including cutting and making good the walls and floors wherever required.White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. Each 5030.52 5030.52 4.0 False None None False None False 20122.08 0 4092719 159368 None 13.59 Providing and fixing PVC S.W.R Nahani Trap 10cms x 10cms with all fitting arrangements and all necessary accessories complete. No 226.6 226.6 9.0 False None None False None False 2039.4 0 4092720 159368 None 13.6 Providing and fixing PVC S.W.R P Trap 10cms x 10cms with all fitting arrangements and all necessary accessories complete. No 318.27 318.27 6.0 False None None False None False 1909.62 0 4092721 159368 None 10.2.2 Supplying UNPLASTICISED PVC pipes conforming to IS 16098 2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading and unloading at both destinations and cuts of pipes herever necessary including jointing of UPVC pipes with cost of elastomeric sealing rings and specials excluding cost of specials with jointing of approved type, with all labour, lead and lifts, including encasing the pipes alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS contractor will make his own arrangements for procuring water for testing etc .Pipes of SN4, 110mm dia. m 296.64 296.64 90.0 False None None False None False 26697.6 0 4092722 159368 None 10.9.8 Supply and delivery at site special moulded variety PVC elbows as per IS 7834 or 1987 and fabricated as per IG124 or 1984 with ISI mark with its latest amendments 110 mm dia PVC Elbows. Each 311.06 311.06 9.0 False None None False None False 2799.54 0 4092723 159368 None 10.10.8 Supply and delivery at site special moulded variety PVC tee as per IS 7834 or 1987 and fabricated as per IG124 or 1984 with ISI mark with its latest amendments 110 mm dia PVC Tee. Each 258.53 258.53 3.0 False None None False None False 775.59 0 4092724 159368 None 10.11.8 Supply and delivery at site special moulded variety PVC bend as per IS 7834 or 1987 and fabricated as per IG124 or 1984 with ISI mark with its latest amendments 110 mm dia PVC BEND. Each 506.76 506.76 9.0 False None None False None False 4560.84 0 4092725 159368 None 10.12.8 Supply and delivery at site special moulded variety PVC service saddles as per IS 7834 or 1987 and fabricated as per IG124 or 1984 with ISI mark with its latest amendments 110 mm dia PVC SERVICE SADDLES. Each 267.8 267.8 9.0 False None None False None False 2410.2 0 4092726 159368 None 10.13.8 Supply and delivery at site special moulded variety PVC reducer as per IS 7834 or 1987 and fabricated as per IG124 or 1984 with ISI mark with its latest amendments 110 mm dia PVC REDUCER. Each 268.83 268.83 9.0 False None None False None False 2419.47 0 4092727 159368 None 11.26.1 Providing and Fixing hand rail of approved size by welding etc to steel ladder,railing,balcony railing ,staricase railing,and similar works including applying primer coat of approved steel primer ERW tube including cost materials,labour, usage charges of machinery complete as per specification and as per direction of the Engineer incharge. Kg 142.14 142.14 320.37 False None None False None False 45537.3918 0 4092728 159368 None 13.53 Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1 is to 4 1 cement 4 coarse sand C.I. cover with frame light duty 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg weight of cover 23 kg and weight of frame 15 kg, R.C.C. top slab with 1 is to 1.5 is to 3 mix 1 cement 1.5 fine sand 3 graded stone aggregate 20 mm nominal size, foundation concrete 1is to 5 is to 10 1 cement 5 fine sand 10 graded stone aggregate 40 mm nominal size, inside plastering 12 mm thick with cement mortar 1 is to 3 1 cement 3 coarse sand, finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design Inside dimensions 455x610 mm and 45 cm deep for single pipe line With common burnt clay non modular bricks of class designation 3.5 Each 5811.26 5811.26 6.0 False None None False None False 34867.56 0 4092729 159368 None 13.34 Providing and placing on terrace at all floor levels polyethylene water storage tank, IS 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. Ltr 9.27 9.27 3500.0 False None None False None False 32445.0 0 4092730 159368 None 13.5.3 Providing and fixing ball valve brass of approved quality, High or low pressure, with plastic floats complete 25 mm nominal bore. No 341.96 341.96 3.0 False None None False None False 1025.88 0 4092731 159368 None 1.4.7 Supplying and fixing sheet Metal box made out of 18 SWG sheet metal with necessary holes for cable or conduit entry as required with one coat of primer of approved make etc.200 x 200 x 65 mm. No 348.0 348.0 14.0 False None None False None False 4872.0 0 4092732 159368 None 1.7.1 Extra for Groove cutting in brick wall or CC floor to the suitable depth for concealing of Conduit or GI pipe and plastering, finishing upto wall surface complete. upto 50 mm conduit in brick wall. m 29.0 29.0 160.0 False None None False None False 4640.0 0 4092733 159368 None 5.16 Supplying and fixing of Shunt trip suitable for MCCB.CBCT. Each 1703.0 1703.0 3.0 False None None False None False 5109.0 0 4092734 159368 None 5.18.1 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and C Type curve, indicator ON or OFF, energy cross 3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC60898. 1 . 6-32Amps SP No 415.0 415.0 3.0 False None None False None False 1245.0 0 4092735 159368 None 5.7.4 Supplying and fixing of Porcelain fuse channel with cut out on existing wooden or panel using necessary nuts, bolts and Washers , 100 Amps. No 619.0 619.0 3.0 False None None False None False 1857.0 0 4092736 159368 None 2.3.2 Wiring for lighting or power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS 694 confirming to latest amendments. 1.5 mm2. m 26.0 26.0 120.0 False None None False None False 3120.0 0 4092737 159368 None 32.05 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS 1554 Part 1 or IS 7098 Part 1, Armouring strip thickness and resistivity as per IS 3975 10 Sqmm, 4 Core, 10 GI Strips 4 x 0.8 mm Km 118004.0 118004.0 0.075 False None None False None False 8850.3 0 4092738 159368 None 31.05 Laying of cable in existing trench or GI pipe or stoneware or RCC Hume pipe using Wooden or Aluminium Rollers as directed by the departmental staff LT cable 2.5 to 25 sqmm. 4 core 10 sqmm Km 16159.0 16159.0 0.075 False None None False None False 1211.925 0 4092739 159368 None 12.28.2 Supplying and Fixing of Special Type Halogen LA Operating voltage range from 180V to 265V, 50Hz AC power Supply. 100 W No 177.0 177.0 6.0 False None None False None False 1062.0 0 4092740 159368 None 13.56 Making soak pit 2.5 m diameter 3.0 m deep with 45 x 45 cm dry brick honey comb shaft with bricks and PVC S.W.R drain pipe 100 mm diameter, 1.8 m long complete as per standard design.With common burnt clay non modular bricks of class designation 3.5. Each 23714.72 23714.72 3.0 False None None False None False 71144.16 0 4092741 159368 None 8.54 Providing and fixing board displaying information, such as Name of work, Tender cost, Name of Contractor, Work completion and liability period etc, having rectangular shape of 1.20m x 0.90m size made out 18 gauge 1.25mm thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border or messages or symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1 is to 4 is to 8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge and MoRTH specification 804 Each 9270.0 9270.0 2.0 False None None False None False 18540.0 0
generalCriterionList	createdTs version createdDate modifiedDate criterionType description tenderEligibilityCriterionDocumentList 1727420723000 0 None None ELIGIBILITY Tenders from Joint ventures are not acceptable. None 1727420723000 0 None None ELIGIBILITY Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka None 1727420723000 0 None None ELIGIBILITY Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document. None 1727420723000 0 None None ELIGIBILITY ALL DOCUMENTS AS PER THE BID DOCUMENTS None
preQualCriterionList	None
technicalCriterionList	createdTs version createdDate modifiedDate description criterionCategoryText criterionTypeOthersValue tenderTechnicalCriterionDocumentList None None None None Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year None None None None None None Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year None None None None None None Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx) None None None None None None Total value of civl engineering works executed and payments received in the last five years (year-wise) None None None None None None Banker Details for reference None None None None None None Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded None None None None None None Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded None None None None None None List of Financial Resources with Certificates None None None None None None Satisfactory completed, at least one similar nature of work like Construction of Buildings works value not less than Rs. 22.00 Lakhs as a prime contractor Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None Executed in any one year the following minimum quantities of work Earth work excavation Embankment 102.36 Cum PCC RCC 91.06 Cum,TMT Steel Reinforcement 5.41 tonne,Solid block masonry331.41 Sm,Solid brick masonry 43.76 Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None liquid assets and or availability of credit facilities of no less than Rs.13.20 Lakhs Credit lines letters of credit certificates from banks for meeting the fund requirement etc. Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Line of Credit None None None None List of existing commitments and ongoing works Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- required Document None None None None List of works for which tenders already submitted Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Satisfactory Performance Certificate None None None None achieved in at least two financial years a minimum financial turnover (in all classes of civil engineering construction works only) of Rs. 88.00 lakhs Financial Status None createdTs version createdDate modifiedDate documentName None None None None Audited CA Certificate of Annual Turnover None None None None Reports on the financial standing of the tenderer,such as profit and loss statements and auditors reports for the last five years Financial Status None createdTs version createdDate modifiedDate documentName None None None None Audited CA Certificate of Annual Turnover
tenderCriterionDocumentList	documentName optional documentTypeText Annual Turnover Certificate True Technical Bid PWD CLASS-III and above Registration Certificate True Technical Bid Annual Turnover Certificate True Technical Bid
tenderWorkLocationList
tenderAddress	None
tenderRecallDTO	None