| 4048608 | 157169 | None | 1.14.1 | Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In all kinds of soils Depth upto 3 m(PWD SR 2023-24 P No.8/I No.1.14.1(Volume-1) | Cum | 107.1 | 107.1 | 4.74 | False | None | None | False | None | False | 507.654 | 0 |
| 4048609 | 157169 | None | 1.23 | Providing and Filling in foundation with granite / trap broken metal 100mm. and down size & with approved sand including hand packing, ramming, watering,including cost of all materials and labour with all lead and lift complete as per specifications. (PWD SR.2023-24 page 11 item 1.23 (Volume-1)
| Cum | 2816.1 | 2816.1 | 0.67 | False | None | None | False | None | False | 1886.787 | 0 |
| 4048610 | 157169 | None | 2.1.3 | Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed gradedcoarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications-Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates (PWD SR 2023-24 P No.15/I No.2.1.3(Volume-1)
| Cum | 6288.45 | 6288.45 | 1.74 | False | None | None | False | None | False | 10941.903 | 0 |
| 4048611 | 157169 | None | 5.4 | Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)(SR Page 9 iteam 5.4 (Volume-2)
| Cum | 6708.45 | 6708.45 | 3.37 | False | None | None | False | None | False | 22607.4765 | 0 |
| 4048612 | 157169 | None | 11.16.2 | Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished seamless type tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. (PWD SR 2023-24(P.No.82/I.No.11.16.2)
| Kg | 154.35 | 154.35 | 924.0 | False | None | None | False | None | False | 142619.4 | 0 |
| 4048613 | 157169 | None | 7.38 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05 %) total coated thickness with zinc coating 120 g/m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 m or as desired by Engineerin- charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.(PWD SR 2023-24(Page.26/I No.7.38 ( Volume-2)
| Sqm | 596.4 | 596.4 | 55.5 | False | None | None | False | None | False | 33100.2 | 0 |
| 4048614 | 157169 | None | 6.36 | Providing and laying factory made Precast concrete solid blocks of 200 mm thickness of grade M10 made of C&D waste including cost of allmaterials, labour, scaffolding and usage charges of machineries & other incidental charges complete as per the direction of engineer incharge of work.(PWD SR 2023-24(Page.17/I No.6.36 ( Volume-2)
| Sqm | 6624.45 | 6624.45 | 52.7 | False | None | None | False | None | False | 349108.515 | 0 |
| 4048615 | 157169 | None | 6.8.2 | Providing and laying 80mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Commercial Traffic Axle load repetitions upto 10MSA & for Residential Streets of approved shape and colour, laid in required pattern and including over 40mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. (WMM/WBM Base to be paid separately as per relevant technical specification) (PWD SR 2023-24 P.No.51/6.8.2(Volume-3)
| Sqm | 1219.05 | 1219.05 | 38.5 | False | None | None | False | None | False | 46933.425 | 0 |
| 4048616 | 157169 | None | 12.90 | Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shal not be made)(PWD SR 2023-24(P.No.110/12.90) | Sqm | 7070.7 | 7070.7 | 3.6 | False | None | None | False | None | False | 25454.52 | 0 |
| 4048617 | 157169 | None | 11.34A | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or roundbars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding (S.R.page No.86, Item 11.34 A (Volume-2)
| Kg | 176.4 | 176.4 | 151.2 | False | None | None | False | None | False | 26671.68 | 0 |
| 4048618 | 157169 | None | 8.33.3 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @ 0.80 L/10 m² of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(PWD SR 2023-24(P.No.47/8.33.3) (Volume-2)
| Sqm | 145.95 | 145.95 | 3.6 | False | None | None | False | None | False | 525.42 | 0 |
| 4048619 | 157169 | None | 12.53 | Providing & fixing 30mm thick factory made rigid foam Panelled Door Shutters made from M.S. tube of 19 gauge thickness, size 19x19mm for stiles and 15x15mm for top & bottom rails, covered with heat moulded PVC C channel of 5mm thick sheet & 30 x 50mm wide to form stiles & 5mm thick & 75mm wide PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick 20mm wide PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet fitted in the M.S. Frame, Sealed to the stiles & rails with 5x30mm PVC sheet beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75 mm Aluminium hinges(PWD SR 2023-24(P.No.104/12.53)
| Sqm | 1667.4 | 1667.4 | 2.1 | False | None | None | False | None | False | 3501.54 | 0 |
| 4048620 | 157169 | None | 12.54 | Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long brackets of 15x15mm M.S Square tube, the entire door frame to be reinforced with 19x19mm M.S Square tube of 19 gauge. The door frame to be fixed to the wall using M.S. Screws of 65/80mm size complete as per manufacturers specification & direction of Engineer-in-charge.(PWD SR 2023-24(P.No.104/12.54)
| Rmtr | 333.9 | 333.9 | 6.2 | False | None | None | False | None | False | 2070.18 | 0 |
| 4048621 | 157169 | None | 9.4 | Providing and laying Cement concrete pavement with 1:2:4 for commercial & residential building floors, hardpaths, footpaths using 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size, including finishing complete as per Engineer incharge.(PWD SR 2023-24 P.No.59/9.4(Volume-2)
| Cum | 6999.3 | 6999.3 | 2.18 | False | None | None | False | None | False | 15258.474 | 0 |
| 4048622 | 157169 | None | 2.5.1 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (S.R.page 16, item 2.5.1 (Volume-1) & Addendum I Percentage Additionalities for Formwork, Centering & Scaffolding- RCC Beams, Lintels & Troughs of Aqueducts ( additional percentage to be added to the finished rates of concrete-60%)(type of material to be used is steel centering.) (PWD SR 2023-24 ( Vol-1 P.No.111/14) | Cum | 11138.4 | 11138.4 | 0.44 | False | None | None | False | None | False | 4900.896 | 0 |
| 4048623 | 157169 | None | 2.11a | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification (S.R Page no 18, item no 2.11a (Volume-1)
| Tonne | 93929.85 | 93929.85 | 0.03 | False | None | None | False | None | False | 2817.8955 | 0 |
| 4048624 | 157169 | None | 8.4.2 | Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing andremoving scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge(.S.R Page no 41, item no 8.4.2 (Volume-2)
| Sqm | 327.6 | 327.6 | 48.95 | False | None | None | False | None | False | 16036.02 | 0 |
| 4048625 | 157169 | None | 8.8 | Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.(PWD SR 2023-24 SR Page.42/Item No.8.8)
| Sqm | 389.55 | 389.55 | 48.95 | False | None | None | False | None | False | 19068.4725 | 0 |
| 4048626 | 157169 | None | 8.25 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(PWD SR 2023-24 SR Page.45/Item No.8.25)
| Sqm | 143.85 | 143.85 | 48.95 | False | None | None | False | None | False | 7041.4575 | 0 |
| 4048627 | 157169 | None | 8.54.2 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats as per specifications and as per directions of Engineer in charge.(S.R Page no 50 ,item no 8.54.2 (Volume-2)
| Sqm | 115.5 | 115.5 | 48.95 | False | None | None | False | None | False | 5653.725 | 0 |
| 4048628 | 157169 | None | 14.7.1 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps (SR page no-132, Item No-14.7.1 (Volume-2)
| Each | 3236.1 | 3236.1 | 1.0 | False | None | None | False | None | False | 3236.1 | 0 |
| 4048629 | 157169 | None | 13.33.3 | Providing & fixing Chorinated Poly Venyl(CPVC) pipes confirming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this includes jointing of pipes and fittings with one step solvent cement, trenching, refilling and testing of joints complete.(External work and Burried).25mm.dia. Page No-122,Item No-13.33.3 (Volume-2)
| Rmtr | 310.8 | 310.8 | 8.0 | False | None | None | False | None | False | 2486.4 | 0 |
| 4048630 | 157169 | None | 13.2.2 | Providing and fixing in position brass bib cock of approved quality of as per dia nominal bore including cost of all materials,labour and HOM of equipments with all leads complete as per specifications. b. 20mm Nominal Bore Page No-117,Item No-13.2.2 (Volume-2)
| Nos | 320.25 | 320.25 | 1.0 | False | None | None | False | None | False | 320.25 | 0 |
| 4048631 | 157169 | None | 1.1a | Loading and Unloading of Stone Boulder/Stone aggregates/Sand/ Kankar/Moorum. (Tipper 5.5 m3)(PWD SR 2023-24 P.No.5/1.1a(Volume-3)
| Cum | 141.75 | 141.75 | 4.74 | False | None | None | False | None | False | 671.895 | 0 |
| 4048632 | 157169 | None | 1.2.1 | Mains Pipe. Open Conduit System Supplying heavy gauge PVC conduit pipe . mm dia.mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary 1.2.1) 19/20 mm dia 2 mm thick PWD Ele SR 2023-24 Page No.1 Item code 1.2.1
| Rmtr | 69.3 | 69.3 | 25.0 | False | None | None | False | None | False | 1732.5 | 0 |
| 4048633 | 157169 | None | 2.2.1 | Points Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. 2.2.1) Short point upto 3Mtr from tapping point to out let via switch PWD Ele SR 2023-24 Page No.4 Item code 2.2.1
| Point | 282.45 | 282.45 | 1.0 | False | None | None | False | None | False | 282.45 | 0 |
| 4048634 | 157169 | None | 2.2.2 | Points Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit/casing capping casing capping using 2x1.5Sqmm (Phase &Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. 2.2.2) Medium point above 3Mtr upto 6Mtr from tapping point to outlet via switch box PWD Ele SR 2023-24 Page No.4 Item code 2.2.2
| Point | 397.95 | 397.95 | 3.0 | False | None | None | False | None | False | 1193.85 | 0 |
| 4048635 | 157169 | None | 2.2.3 | Points Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. 2.2.3) Long point above 6Mtr upto 10Mtr from tapping point to out let via switch box PWD Ele SR 2023-24 Page No.4 Item code 2.2.3
| Point | 582.75 | 582.75 | 1.0 | False | None | None | False | None | False | 582.75 | 0 |
| 4048636 | 157169 | None | 2.3.2 | Wire:Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS- 694:2010 2.3.2) 1.5 mm2 PWD Ele SR 2023-24 Page No.4 Item code 2.3.2
| Rmtr | 27.3 | 27.3 | 10.0 | False | None | None | False | None | False | 273.0 | 0 |
| 4048637 | 157169 | None | 2.3.3 | Wire: Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS- 694:2010 2.3.3)2.5 mm2 PWD Ele SR 2023-24 Page No.4 Item code 2.3.3
| Rmtr | 44.1 | 44.1 | 20.0 | False | None | None | False | None | False | 882.0 | 0 |
| 4048638 | 157169 | None | 3.3.4 | PVC modular box: Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/NF screws etc., complete. 3.3.4) 6 Way PWD Ele SR 2023-24 Page No.7 Item code 3.3.4
| Nos | 181.65 | 181.65 | 1.0 | False | None | None | False | None | False | 181.65 | 0 |
| 4048639 | 157169 | None | 3.3.5 | PVC modular box: Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/NF screws etc., complete.3.3.5) 8 Way PWD Ele SR 2023-24 Page No.7 Item code 3.3.5
| Nos | 229.95 | 229.95 | 1.0 | False | None | None | False | None | False | 229.95 | 0 |
| 4048640 | 157169 | None | 3.5.4 | modular Switch Plate Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.3.5.4)8 Module PWD,Elct, SR 2023-24 Page No. 7 IItem code 3.5.4
| Nos | 245.7 | 245.7 | 1.0 | False | None | None | False | None | False | 245.7 | 0 |
| 4048641 | 157169 | None | 3.5.5 | modular Switch Plate Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 3.5.5)8 Module PWD Ele SR 2023-24 Page No.7 Item code 3.5.5
| Nos | 298.2 | 298.2 | 1.0 | False | None | None | False | None | False | 298.2 | 0 |
| 4048642 | 157169 | None | 3.6.1 | Modular switch Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 3.6.1)6Amps one way. PWD Ele SR 2023-24 Page No.8 Item code 3.6.1
| Nos | 107.1 | 107.1 | 7.0 | False | None | None | False | None | False | 749.7 | 0 |
| 4048643 | 157169 | None | 3.6.2 | Modular socket Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 3.6.2)6A Two Way Switch PWD Ele SR 2023-24 Page No.8 Item code 3.6.2
| Nos | 174.3 | 174.3 | 2.0 | False | None | None | False | None | False | 348.6 | 0 |
| 4048644 | 157169 | None | 3.6.4 | Stepped Fan Regulator. Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 3.6.4)Stepped Fan Regulator. PWD Ele SR 2023-24 Page No.8 Item code 3.6.4
| Nos | 374.85 | 374.85 | 1.0 | False | None | None | False | None | False | 374.85 | 0 |
| 4048645 | 157169 | None | 3.6.4 | Batten Holder Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board. 3.14.7) 6A Batten Holder PWD Ele SR 2023-24 Page No.9 Item code 3.6.4
| Nos | 77.7 | 77.7 | 5.0 | False | None | None | False | None | False | 388.5 | 0 |
| 4048646 | 157169 | None | 11.3.2 | LED Tube Fitting Supplying of .feet -PVC Batten with integrated LED tube . W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than 80. Power Input: 220- 240V@ 50/60Hz & Power factor less than 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. 11.3.2) LED light fighting 1 x4'- 20/22 w PWD Ele SR 2023-24 Page No.42 Item code 11.3.2 | Nos | 724.5 | 724.5 | 4.0 | False | None | None | False | None | False | 2898.0 | 0 |
| 4048647 | 157169 | None | 13.7.1 | LED Fitting fixing Charges Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076"" twin twisted PVC insulated wires, required Nos of round blocks and clamps. 13.7.1).On wall/ ceiling / Rafter / Girders PWD Ele SR 2023-24 Page No.55 Item code 13.7.1
| Nos | 128.1 | 128.1 | 4.0 | False | None | None | False | None | False | 512.4 | 0 |
| 4048648 | 157169 | None | 6.3.1 | Fans 48” Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball bearing system. 6.3.1) 48" Sweep (1200mm) Regular model PWD Ele SR 2023-24 Page No.55 Item code 6.3.1
| Nos | 3133.2 | 3133.2 | 1.0 | False | None | None | False | None | False | 3133.2 | 0 |
| 4048649 | 157169 | None | 6.3.1 | Fan Fixing Charges Fixing a ceiling /wall mounting fan of all capacities and all types, with necessary clamps and 'S' hook made out of 15mm dia MS rod, with 5 A. ceiling rose of approved quality with necessary length of 23/0.0076 inch PVC insulated twin twisted wire of approved quality, mounted on a suitable size wooden board and wired. PWD Ele SR 2023-24 Page No.56 Item code 6.3.1
| Nos | 330.75 | 330.75 | 1.0 | False | None | None | False | None | False | 330.75 | 0 |
| 4048650 | 157169 | None | 5.18.4 | Fuses. Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers. 5.18.4) 6-32 Amps DP Basic Rate - 241=00 Wtg 5% - 12=05 Total - 253=05 PWD Ele SR 2023-24 Page No.56 Item code 5.18.4
| Nos | 253.05 | 253.05 | 2.0 | False | None | None | False | None | False | 506.1 | 0 |
| 4048651 | 157169 | None | 5.18.4 | MCB Switches. Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 5.18.4) 6-32 Amps DP PWD Ele SR 2023-24 Page No.56 Item code 5.18.4
| Nos | 775.95 | 775.95 | 1.0 | False | None | None | False | None | False | 775.95 | 0 |
| 4048652 | 157169 | None | 5.42.2 | MS Box Fabricating supplying and mounting MS box made out .SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements,with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour etc.,complete. 5.42.2) 16SWG Basic Rate - 00=43 ,ASL 5% - 00=0215 Total - 00=4515 PWD Ele SR 2023-24 Page No.19 Item code 5.42.2
| Sq CM | 0.45 | 0.45 | 5550.0 | False | None | None | False | None | False | 2497.5 | 0 |
| 4048653 | 157169 | None | 1.2.3 | PVC Pipe Supplying heavy gauge PVC conduit pipe . mm dia.mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary 1.2.3) 32 mm dia 2.5 mm thick PWD Ele SR 2023-24 Page No.2 Item code1.2.3
| Rmtr | 108.15 | 108.15 | 30.0 | False | None | None | False | None | False | 3244.5 | 0 |
| 4048654 | 157169 | None | 25a | Earthing 25.a) GI Grounding pipe, B - Class, 42 mm dia, 2.5 M long, 3.2 mm thick with bolts nuts, GI Strips and washers complete 25.a) Transformer grounding Hescom SR 2023-24 Item code 25.a (Material Cost)
| Nos | 1815.45 | 1815.45 | 1.0 | False | None | None | False | None | False | 1815.45 | 0 |
| 4048655 | 157169 | None | 25a | Earthing 25.a) GI Grounding pipe, B - Class, 42 mm dia, 2.5 M long, 3.2 mm thick with bolts nuts, GI Strips and washers complete 25.a) Transformer grounding Hescom SR 2023-24 Item code 25.a (Labour Cost)
| Nos | 996.45 | 996.45 | 1.0 | False | None | None | False | None | False | 996.45 | 0 |
| 4048656 | 157169 | None | 25a | Digging of Pit 1.6 ) Digging of Pit for providing GI Pipe type Earthing 25.a) Transformer grounding Basic Rate - 759=00 ASL 5% - 37=95 Total - 796=95 Hescom SR 2023-24 Item code 25.a (Labour Cost)
| Nos | 796.95 | 796.95 | 1.0 | False | None | None | False | None | False | 796.95 | 0 |
| 4048657 | 157169 | None | 32.05 | UG Cable 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 32.04) 16 Sqmm, 2 Core, (9 GI Strips - 4 x 0.8 mm) Hescom SR 2023-24 Item code 32.05 (Material Cost)
| Km | 92838.9 | 92838.9 | 0.03 | False | None | None | False | None | False | 2785.167 | 0 |
| 4048658 | 157169 | None | 21.05 | UG Cable Labour Charges Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff 21.05) 2.5 to 25 Sqmm ESCOMs SR 2023-24 Item code 21.05 (Labour Cost)
| Km | 21930.3 | 21930.3 | 0.03 | False | None | None | False | None | False | 657.909 | 0 |
| 4048659 | 157169 | None | 1.6.1 | Digging Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, including dressing of excavated surfaces, disposing off or leveling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m. Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering and lift upto 1.5 m including cost of labour, tools, usage& other appurtenances required to complete the work. 1.6.1) In all kinds of soils. Depth upto 1.50m Sl No Item No 1.6.1. PWD Civil SR vol 1 page no 6
| Cum | 508.2 | 508.2 | 6.9 | False | None | None | False | None | False | 3506.58 | 0 |