1727442869000 | 0 | None | None | Water supply/sewage lines | Providing & laying 0f 230mm dia SW line inplace of 200mm dia SW pipe with construction of new machine holes at Kaverinagara Quarters 1st cross, ward-42, Lakshmidevinagara coming under Peenya service station of AEENW-2 sub division | 967118.83 | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
---|
4097811 | 159624 | None | code01 | Dismantling of cement concrete pavement by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 m3 in volume and stock pilling at designated locations and disposal of dismantled materials and stacking serviceable and unserviceable materials separately | Cum | 563.0 | 563.0 | 22.7 | False | None | None | False | None | False | 12780.1 | 0 | 4097812 | 159624 | None | code02 | Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricading, caution lights, bracing, using sight rails & bonding rods at every 100 mm wherever necessary as directed, removal of stumps and other deleterious matter, dressing of sides and levelling the bottom of trench to the extent required , utilising the available excavated earth locally for the work etc., and all other appurtenances complete in the following strata. Depth up to 1.5m | Cum | 262.0 | 262.0 | 136.34 | False | None | None | False | None | False | 35721.08 | 0 | 4097813 | 159624 | None | code03 | Depth exceeding 1.5m but not exceeding 3m | Cum | 331.0 | 331.0 | 1.07 | False | None | None | False | None | False | 354.17 | 0 | 4097814 | 159624 | None | code04 | Providing lowering laying, jointing, testing and commissioning of following diameters glazed stone ware pipes, conforming to IS 651:1992, (with 5th revision) in all respects jointing with EPDM rubber rings (seals according to EN 681 & ASPM 425) The rubber seals joints pipe will have groves in interior of socket and exterior of the spigot. The rubber gasket shall be prefixed at the factory by the manufacturer rigidly with approved glue to have leak proof joint including conveying of pipe to work site and rolling and lowering into trenches, laying true to line, level and perfect linking at joints testing and commissioning including loading and unloading at both destinations and cuts of pipes wherever necessary including jointing of GSW pipes and specials, with rubber gaskets conforming to EN 681 and ASTM C-425 including cleaning the socket and spigot with soap solution and applying talcum powder for detecting crack, then applying glue and before inserting of rubber gaskets, jacking and fixing in perfect condition including the cost of soap solution, talcum powder and glue etc. and giving necessary hydraulic test to the required pressure of water head with all lead and lifts including costing of jointing materials and all necessary survey works for laying of sewers etc., and disposal of debris as directed etc., complete. (Contractor will make his own arrangements for procuring water for testing) with Rubber ring gasket joints 230mm dia SW line | m | 936.0 | 936.0 | 151.7 | False | None | None | False | None | False | 141991.2 | 0 | 4097815 | 159624 | None | code05 | Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5 m. Including cost of all labour complete as per specifications. | Cum | 160.0 | 160.0 | 126.68 | False | None | None | False | None | False | 20268.8 | 0 | 4097816 | 159624 | None | code06 | Providing and constructing "WIRE CUT BRICK MACHINEHOLE CHAMBERS" using Portland/Pozzolana cement, conical in shape at top, with CC 1:3:6 foundation using 40mm and down size graded metal of approved quality and with an offset of 0.15M alround the chamber. Construct Brick masonry in CM 1:4, 340 mm thick, with wirecut bricks of approved quality, plaster inside and out side with CM 1:3, 12mm thick, except for the conical surface outside where the plaster thickness shall be 20mm. Slope inside to be 1:6 in the concrete towards central drain and finished smooth. Fixing of pipes in CC 1:2:4 with graded metal of 20mm and down size. Providing and fixing SFRC Machinehole frame and cover (Heavy Duty) conforming to IS:12592 with latest amendment, in CC 1:2:4. Providing and fixing footsteps made of 12mm dia. steel bars (Fe-500) with 3mm thick plastic encapsulation (IS-10910). The footsteps shall be fixed 30cms apart and on CC block embeded t osonry wall. The whole works include watering, curing, barricading, danger lighting, pouring tar over MH frame and cover, cost of tar, shoring, strutting, de-watering, engraving Machinehole number with flow direction on the inner conical surface etc. as per the drawing etc. as per technical specifications and for the following diameters and depth etc For 1.2m dia 1 mtr depth | Nos | 29047.0 | 29047.0 | 10.0 | False | None | None | False | None | False | 290470.0 | 0 | 4097817 | 159624 | None | code07 | Above 1.0m depth MH in interms of 0.1 | Nos | 3173.7 | 3173.7 | 60.0 | False | None | None | False | None | False | 190422.0 | 0 | 4097818 | 159624 | None | code08 | Dismantling the damaged or collapsed Machinehole ,conical in shape, and reconstructing the same for the same dimensions, with machine made wire cut brick in CM 1:4 with ordinary portland cement etc. as per design and specifications. The existing ring, cover and CC beeding to be used. For 1.2 m dia manholes 1.5 m depth | Nos | 23935.0 | 23935.0 | 1.0 | False | None | None | False | None | False | 23935.0 | 0 | 4097819 | 159624 | None | code09 | Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak proof including jointing of approved type with all labour charges and all lift charges, handling charges including encasing the pipe around to a depth not less than 15 cms with gravel or selected earth available from the excavation etc. complete 110mm dia | m | 282.0 | 282.0 | 400.0 | False | None | None | False | None | False | 112800.0 | 0 | 4097820 | 159624 | None | code10 | Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. | Cum | 5664.0 | 5664.0 | 24.27 | False | None | None | False | None | False | 137465.28 | 0 | 4097821 | 159624 | None | code11 | Removal of Unserviceable Soil with Disposal upto a suitable distance as directed by the Engineer incharge of work | Cum | 85.0 | 85.0 | 10.72 | False | None | None | False | None | False | 911.2 | 0 |
|