createdTs	None
version	None
createdDate	None
modifiedDate	None
noticeInvitingTenderDTO	createdTs 1726656284386 version 8 createdDate None modifiedDate None tenderType RFQ evaluationType TWO_COVER evaluationTypeText Two Cover invitingStrategy OPEN invitingStrategyText Open taxType INCLUSIVE_TAX tenderFee 5000.00 emd 590000.00 bidValueType ITEM_WISE bidValueTypeText Item wise tenderReceiptClose 07-10-2024 16:30:00 tenderQueryClose 30-09-2024 16:30:00 technicalBidOpen 09-10-2024 16:30:00 publishedDate 27-09-2024 18:06:35 publishedByPost PWD_EE_BLD_DIV2_BNG publishedByUser KPE10874 - PRADEEP DEVANOOR bidValidityPeriod 90 noOfCalls 1 preBidMeetingDate 30-09-2024 16:30:00 preBidMeetingYn True preQualificationBidOpen None denominationType RUPEES denominationTypeText Rupees retenderedYn None percentageRateTypeText None contactPerson Smt Supriya splitEmdRequiredYn True emdBankGuarantee 490000.00 emdCash 100000.00 bgValidityPeriod 365 hideWeightage None multipleCurrencySelectionAllowedYn False isTechWeightageAllowed False highestBidderSelection False isVariableEmdAllowed None qcbsTenderYn None itemwiseEmdRequiredYn None sampleSubmissionDate None officeNumber 08022122856 mobileNumber 9900777115 tenderSupplierList None
tenderSchedule	createdTs 1726656284417 version 4 createdDate None modifiedDate None tenderNumber PWD/2024-25/BD/WORK_INDENT14949 title Construction of Annexe Building to Terige Bhavan at Nagarabhavi, Bangalore. description Construction of Annexe Building to Terige Bhavan at Nagarabhavi, Bangalore. category WORKS categoryText Works ecv 39330659.31 deptName Public Works Department status PUBLISHED statusText Published remarks None csrValue None ecvtenderYn False location 1776 locationName PWD No.2 Buildings Division Office Bengaluru provisionalAmount 50000000.0 groupOverheadTotal 0.0 fileNumber KPWD/AEE09/8443DC/24-25
tenderSubEstimateList	createdTs version createdDate modifiedDate workCategoryName subEstimateName estimateTotal itemList 1726656284000 0 None None Buildings Construction of Annexe Building to Terige Bhavan at Nagarabhavi, Bangalore. 39330659.31 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 4022993 155956 None 19.2.1 Demolishing cement concrete manually/ by mechanical means including disposal of material to the appropriate disposal area as per direction of Engineer-in-charge. Cum 1829.3 1829.3 78.0 False None None False None False 142685.4 0 4022994 155956 None 1.13 Earth work in surface excavation by mechanical means for lowering & leveling the ground without blasting for all works other than foundation in Ordinary/Soft rock & depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work In Ordinary/Soft rock upto 300 mm depth Cum 398.2 398.2 126.0 False None None False None False 50173.2 0 4022995 155956 None 1.14 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work -as per direction of Engineer-in-charge. for all kinds of soil depth up to 3m Cum 112.2 112.2 250.85 False None None False None False 28145.37 0 4022996 155956 None 1.15.2 Earth work excavation for Foundation by mechanical means for all works &depth upto 3 m, as per drawing and technical specifications, including settingout, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. Depth exceeding 1.5 m, but not exceeding 3 m Cum 467.5 467.5 167.24 False None None False None False 78184.7 0 4022997 155956 None 4.1 Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 l/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications. as per direction of Engineer-in-charge. Sqm 129.8 129.8 1172.81 False None None False None False 152230.738 0 4022998 155956 None 1.6.1 Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, including dressing of excavated surfaces, disposing off or leveling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m. Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering and lift upto 1.5 m including cost of labour, tools, usage& other appurtenances required to complete the work. In all kinds of soils. Depth upto 1.50m Cum 532.4 532.4 48.78 False None None False None False 25970.472 0 4022999 155956 None 1.9 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. Cum 292.6 292.6 412.1 False None None False None False 120580.46 0 4023000 155956 None 1.10 Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5 m. Including cost of all labour complete as per specifications Cum 176.0 176.0 16.74 False None None False None False 2946.24 0 4023001 155956 None 2.1.2 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately)-Mix 1:4:8( M7.5) Using 40 mm nominal size graded crushed coarse aggregates as per direction of Engineer-in-charge. Cum 6230.4 6230.4 82.52 False None None False None False 514132.608 0 4023002 155956 None Addendum I Additionalities for Formwork, Centering & Scaffolding. Percentage on finished rate of concrete per m3 Cum 498.43 498.43 82.55 False None None False None False 41145.3965 0 4023003 155956 None 2.1.3 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates . Cum 6653.78 6653.78 3.15 False None None False None False 20959.407 0 4023004 155956 None 2.1.3 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates . Cum 6719.66 6719.66 3.15 False None None False None False 21166.929 0 4023005 155956 None 5.4 Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand). Cum 7027.9 7027.9 27.59 False None None False None False 193899.761 0 4023006 155956 None 2.3.2 Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. Cum 7128.0 7128.0 133.61 False None None False None False 952372.08 0 4023007 155956 None Addendum I Additionalities for Formwork, Centering & Scaffolding. Percentage on finished rate of concrete per m3. Cum 570.24 570.24 133.6 False None None False None False 76184.064 0 4023008 155956 None 2.3.2 Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. Cum 7128.0 7128.0 20.97 False None None False None False 149474.16 0 4023009 155956 None Addendum I Additionalities for Formwork, Centering & Scaffolding. Percentage on finished rate of concrete per m3. Cum 3564.0 3564.0 20.97 False None None False None False 74737.08 0 4023010 155956 None 2.5.2 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 7527.3 7527.3 31.04 False None None False None False 233647.392 0 4023011 155956 None Addendum I Additionalities for Formwork, Centering & Scaffolding. Percentage on finished rate of concrete per m3. Cum 5269.11 5269.11 31.04 False None None False None False 163553.1744 0 4023012 155956 None 2.5.2 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. Cum 7602.57 7602.57 12.54 False None None False None False 95336.2278 0 4023013 155956 None Addendum I Additionalities for Formwork, Centering & Scaffolding. Percentage on finished rate of concrete per m3. Cum 5321.8 5321.8 12.54 False None None False None False 66735.372 0 4023014 155956 None 2.5.2 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 7677.85 7677.85 12.54 False None None False None False 96280.239 0 4023015 155956 None Addendum I Additionalities for Formwork, Centering & Scaffolding. Percentage on finished rate of concrete per m3. Cum 5374.49 5374.49 12.54 False None None False None False 67396.1046 0 4023016 155956 None 2.5.2 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 7753.12 7753.12 7.61 False None None False None False 59001.2432 0 4023017 155956 None Addendum I Additionalities for Formwork, Centering & Scaffolding. Percentage on finished rate of concrete per m3. Cum 5427.18 5427.18 7.61 False None None False None False 41300.8398 0 4023018 155956 None 2.5.2 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 7527.3 7527.3 29.04 False None None False None False 218592.792 0 4023019 155956 None Addendum I Additionalities for Formwork, Centering & Scaffolding. Percentage on finished rate of concrete per m3. Cum 4516.38 4516.38 28.46 False None None False None False 128536.1748 0 4023020 155956 None 2.5.2 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 7602.57 7602.57 29.74 False None None False None False 226100.4318 0 4023021 155956 None Addendum I Additionalities for Formwork, Centering & Scaffolding. Percentage on finished rate of concrete per m3 Cum 4561.54 4561.54 29.71 False None None False None False 135523.3534 0 4023022 155956 None 2.5.2 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 7677.85 7677.85 29.74 False None None False None False 228339.259 0 4023023 155956 None Addendum I Additionalities for Formwork, Centering & Scaffolding. Percentage on finished rate of concrete per m3 Cum 4606.71 4606.71 29.71 False None None False None False 136865.3541 0 4023024 155956 None 2.5.2 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 7753.12 7753.12 3.65 False None None False None False 28298.888 0 4023025 155956 None Addendum I Additionalities for Formwork, Centering & Scaffolding. Percentage on finished rate of concrete per m3 Cum 4651.87 4651.87 3.65 False None None False None False 16979.3255 0 4023026 155956 None 2.5.2 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 7527.3 7527.3 62.68 False None None False None False 471811.164 0 4023027 155956 None Addendum I Additionalities for Formwork, Centering & Scaffolding. Percentage on finished rate of concrete per m3 Cum 3763.65 3763.65 62.69 False None None False None False 235943.2185 0 4023028 155956 None 2.5.2 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 7602.57 7602.57 62.68 False None None False None False 476529.0876 0 4023029 155956 None Addendum I Additionalities for Formwork, Centering & Scaffolding. Percentage on finished rate of concrete per m3. Cum 3801.29 3801.29 62.69 False None None False None False 238302.8701 0 4023030 155956 None 2.5.2 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 7677.85 7677.85 62.68 False None None False None False 481247.638 0 4023031 155956 None Addendum I Additionalities for Formwork, Centering & Scaffolding. Percentage on finished rate of concrete per m3. Cum 3838.92 3838.92 62.69 False None None False None False 240661.8948 0 4023032 155956 None 2.5.2 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 7753.12 7753.12 10.24 False None None False None False 79391.9488 0 4023033 155956 None Addendum I Additionalities for Formwork, Centering & Scaffolding. Percentage on finished rate of concrete per m3 Cum 3876.56 3876.56 10.24 False None None False None False 39695.9744 0 4023034 155956 None 2.5.2 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 7527.3 7527.3 2.92 False None None False None False 21979.716 0 4023035 155956 None Addendum I Additionalities for Formwork, Centering & Scaffolding. Percentage on finished rate of concrete per m3 Cum 3763.65 3763.65 2.85 False None None False None False 10726.4025 0 4023036 155956 None 2.5.2 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 7602.57 7602.57 2.92 False None None False None False 22199.5044 0 4023037 155956 None Addendum I Additionalities for Formwork, Centering & Scaffolding. Percentage on finished rate of concrete per m3 Cum 3801.29 3801.29 2.85 False None None False None False 10833.6765 0 4023038 155956 None 2.5.2 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 7677.85 7677.85 2.92 False None None False None False 22419.322 0 4023039 155956 None Addendum I Additionalities for Formwork, Centering & Scaffolding. Percentage on finished rate of concrete per m3 Cum 3838.92 3838.92 2.85 False None None False None False 10940.922 0 4023040 155956 None 2.5.2 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 7602.57 7602.57 7.73 False None None False None False 58767.8661 0 4023041 155956 None Addendum I Additionalities for Formwork, Centering & Scaffolding. Percentage on finished rate of concrete per m3. Cum 4561.54 4561.54 7.73 False None None False None False 35260.7042 0 4023042 155956 None 2.5.2 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 7677.85 7677.85 7.73 False None None False None False 59349.7805 0 4023043 155956 None Addendum I Additionalities for Formwork, Centering & Scaffolding. Percentage on finished rate of concrete per m3. Cum 4604.71 4604.71 7.73 False None None False None False 35594.4083 0 4023044 155956 None 2.5.2 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 7602.57 7602.57 0.43 False None None False None False 3269.1051 0 4023045 155956 None Addendum I Additionalities for Formwork, Centering & Scaffolding. Percentage on finished rate of concrete per m3 Cum 3421.16 3421.16 0.43 False None None False None False 1471.0988 0 4023046 155956 None 2.5.2 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 7677.85 7677.85 1.2 False None None False None False 9213.42 0 4023047 155956 None Addendum I Additionalities for Formwork, Centering & Scaffolding. Percentage on finished rate of concrete per m3 Cum 3455.03 3455.03 1.21 False None None False None False 4180.5863 0 4023048 155956 None 7.18 Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinderof 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slopecompacting, including cost of materials, labour, curing complete as per specifications. Cum 2240.89 2240.89 11.41 False None None False None False 25568.5549 0 4023049 155956 None 7.18 Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinderof 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slopecompacting, including cost of materials, labour, curing complete as per specifications. Cum 2263.07 2263.07 11.41 False None None False None False 25821.6287 0 4023050 155956 None 2.11 a Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Tonne 98402.7 98402.7 39.41 False None None False None False 3878050.407 0 4023051 155956 None 2.11 a Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Cum 99386.73 99386.73 18.25 False None None False None False 1813807.8225 0 4023052 155956 None 2.11 a Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Cum 100370.75 100370.75 18.0 False None None False None False 1806673.5 0 4023053 155956 None 2.11 a Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification Cum 101354.78 101354.78 3.8 False None None False None False 385148.164 0 4023054 155956 None 6.31 Providing and laying autoclaved aerated cement blocks masonry with 150mm/230mm/300 mm thick AAC blocks as per IS 2185 (Part III) in super structure above plinth level up to floor I level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work Cum 8775.8 8775.8 22.58 False None None False None False 198157.564 0 4023055 155956 None 6.31 Providing and laying autoclaved aerated cement blocks masonry with 150mm/230mm/300 mm thick AAC blocks as per IS 2185 (Part III) in super structure above plinth level up to floor I level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. Cum 8863.56 8863.56 87.93 False None None False None False 779372.8308 0 4023056 155956 None 6.31 Providing and laying autoclaved aerated cement blocks masonry with 150mm/230mm/300 mm thick AAC blocks as per IS 2185 (Part III) in super structure above plinth level up to floor I level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. Cum 8951.32 8951.32 87.78 False None None False None False 785746.8696 0 4023057 155956 None 6.31 Providing and laying autoclaved aerated cement blocks masonry with 150mm/230mm/300 mm thick AAC blocks as per IS 2185 (Part III) in super structure above plinth level up to floor I level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. Cum 9039.07 9039.07 30.44 False None None False None False 275149.2908 0 4023058 155956 None 6.26 Providing and laying Autoclaved Aerated Cement blocks masonry with 100 mm thick AAC blocks as per IS 2185 (Part III) in super structure above plinth level up to floor I level in cement mortar 1:4 (1 cement : 4 coarse sand ) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. Cum 9506.83 9506.83 11.19 False None None False None False 106381.4277 0 4023059 155956 None 6.26 Providing and laying Autoclaved Aerated Cement blocks masonry with 100 mm thick AAC blocks as per IS 2185 (Part III) in super structure above plinth level up to floor I level in cement mortar 1:4 (1 cement : 4 coarse sand ) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. Cum 9600.95 9600.95 11.19 False None None False None False 107434.6305 0 4023060 155956 None 2.1.6 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately)-Mix 1:2:4( M10) Using 20 mm nominal size graded crushed coarse aggregates as per direction of Engineer-in-charge. Cum 6867.3 6867.3 16.95 False None None False None False 116400.735 0 4023061 155956 None 8.5.2 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge Sqm 383.9 383.9 298.38 False None None False None False 114548.082 0 4023062 155956 None 8.4.2 Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 346.63 346.63 733.69 False None None False None False 254318.9647 0 4023063 155956 None 8.5.2 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 387.74 387.74 58.9 False None None False None False 22837.886 0 4023064 155956 None 8.4.2 Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 350.06 350.06 787.52 False None None False None False 275679.2512 0 4023065 155956 None 8.5.2 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 391.58 391.58 58.9 False None None False None False 23064.062 0 4023066 155956 None 8.4.2 Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 353.5 353.5 98.04 False None None False None False 34657.14 0 4023067 155956 None 8.8 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 412.18 412.18 326.54 False None None False None False 134593.2572 0 4023068 155956 None 8.8 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 416.26 416.26 343.46 False None None False None False 142968.6596 0 4023069 155956 None 8.8 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 420.34 420.34 267.75 False None None False None False 112546.035 0 4023070 155956 None 8.3.2 Providing 20 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge Sqm 366.3 366.3 111.03 False None None False None False 40670.289 0 4023071 155956 None 8.2.2 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer in charge Sqm 306.9 306.9 8.1 False None None False None False 2485.89 0 4023072 155956 None 8.2.2 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer in charge Sqm 309.97 309.97 124.74 False None None False None False 38665.6578 0 4023073 155956 None 8.2.2 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer in charge Sqm 313.04 313.04 124.12 False None None False None False 38854.5248 0 4023074 155956 None 12.13.1 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. Cum 108696.5 108696.5 0.15 False None None False None False 16304.475 0 4023075 155956 None 12.13.1 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. Cum 109783.47 109783.47 2.32 False None None False None False 254697.6504 0 4023076 155956 None 12.13.1 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. Cum 110870.43 110870.43 2.32 False None None False None False 257219.3976 0 4023077 155956 None 12.13.1 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. Cum 111957.4 111957.4 0.08 False None None False None False 8956.592 0 4023078 155956 None 12.57.4 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification -do- 35 mm thick both side Teak Sqm 4985.2 4985.2 5.46 False None None False None False 27219.192 0 4023079 155956 None 12.57.4 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification -do- 35 mm thick both side Teak Sqm 5035.05 5035.05 68.46 False None None False None False 344699.523 0 4023080 155956 None 12.57.4 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification -do- 35 mm thick both side Teak Sqm 5084.9 5084.9 68.46 False None None False None False 348112.254 0 4023081 155956 None 12.57.4 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification -do- 35 mm thick both side Teak Sqm 5134.76 5134.76 2.73 False None None False None False 14017.8948 0 4023082 155956 None 12.51 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. No 1117.6 1117.6 2.0 False None None False None False 2235.2 0 4023083 155956 None 12.51 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications No 1128.78 1128.78 34.0 False None None False None False 38378.52 0 4023084 155956 None 12.51 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. No 1139.95 1139.95 34.0 False None None False None False 38758.3 0 4023085 155956 None 12.90 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications.( No 1151.13 1151.13 1.0 False None None False None False 1151.13 0 4023086 155956 None 12.90 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) Cum 7481.47 7481.47 21.6 False None None False None False 161599.752 0 4023087 155956 None 12.85 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) Sqm 7555.55 7555.55 21.6 False None None False None False 163199.88 0 4023088 155956 None 12.85 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilato frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm.(The cost is inclusive of all fixtures separate charges for minor T&P's shall not be made) Sqm 6353.81 6353.81 21.12 False None None False None False 134192.4672 0 4023089 155956 None 12.85 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm.(The cost is inclusive of all fixtures separate charges for minor T&P's shall not be made) Sqm 6416.72 6416.72 21.12 False None None False None False 135521.1264 0 4023090 155956 None 11.34B Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc Kg 203.31 203.31 897.12 False None None False None False 182393.4672 0 4023091 155956 None 11.34B Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc. Kg 205.33 205.33 897.12 False None None False None False 184205.6496 0 4023092 155956 None 8.40 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 127.77 127.77 42.72 False None None False None False 5458.3344 0 4023093 155956 None 8.40 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. m 129.03 129.03 42.72 False None None False None False 5512.1616 0 4023094 155956 None 8.79 Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge: 10mm to 15 mm wide and 8 mm deep groove. m 57.2 57.2 50.0 False None None False None False 2860.0 0 4023095 155956 None 8.79 Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge: 10mm to 15 mm wide and 8 mm deep groove m 57.77 57.77 80.0 False None None False None False 4621.6 0 4023096 155956 None 8.79 Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge: 10mm to 15 mm wide and 8 mm deep groove m 58.34 58.34 80.0 False None None False None False 4667.2 0 4023097 155956 None 8.16.2 Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. ( length of mesh only be measured for payment Plaster mesh 150mm wide m 41.8 41.8 80.0 False None None False None False 3344.0 0 4023098 155956 None 8.16.2 Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. ( length of mesh only be measured for payment Plaster mesh 150mm wide m 42.22 42.22 200.0 False None None False None False 8444.0 0 4023099 155956 None 8.16.2 Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. ( length of mesh only be measured for payment Plaster mesh 150mm wide m 42.64 42.64 200.0 False None None False None False 8528.0 0 4023100 155956 None 9.24 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. ** Polished Granite stone slab Black, Cat Eye, River Pink or equivalent Sqm 3137.2 3137.2 58.01 False None None False None False 181988.972 0 4023101 155956 None 9.24 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. ** Polished Granite stone slab Black, Cat Eye, River Pink or equivalent Sqm 3168.57 3168.57 99.35 False None None False None False 314797.4295 0 4023102 155956 None 9.24 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. ** Polished Granite stone slab Black, Cat Eye, River Pink or equivalent Sqm 3199.94 3199.94 99.35 False None None False None False 317914.039 0 4023103 155956 None 10.2 Providing edge moulding to 18mm thick Granite stone counters, vanities etc including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge m 360.8 360.8 56.3 False None None False None False 20313.04 0 4023104 155956 None 10.2 Providing edge moulding to 18mm thick Granite stone counters, vanities etc including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge m 364.41 364.41 56.3 False None None False None False 20516.283 0 4023105 155956 None 10.2 Providing edge moulding to 18mm thick Granite stone counters, vanities etc including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge m 368.02 368.02 56.3 False None None False None False 20719.526 0 4023106 155956 None 10.19 Providing and fixing 20mm thick gang saw water cut Lakared granite for cladding in CM 1:3 (1 cement : 3 coarse sand) proportion with a coat of rough plastering using CM 1:4 (1 cement : 4 fine sand), cut to required shape, pattern with paper joints, finished with cement mortar using white cement and colour pigments to match the colour of slab making through jointing with sealant, grooves in joints including cost of curing etc., complete including cost and conveyance of all materials, mortar, labour for all items of work, usage charges of machinery etc., complete as per specification Sqm 3967.7 3967.7 56.68 False None None False None False 224889.236 0 4023107 155956 None 10.19 Providing and fixing 20mm thick gang saw water cut Lakared granite for cladding in CM 1:3 (1 cement : 3 coarse sand) proportion with a coat of rough plastering using CM 1:4 (1 cement : 4 fine sand), cut to required shape, pattern with paper joints, finished with cement mortar using white cement and colour pigments to match the colour of slab making through jointing with sealant, grooves in joints including cost of curing etc., complete including cost and conveyance of all materials, mortar, labour for all items of work, usage charges of machinery etc., complete as per specification Sqm 4007.38 4007.38 56.68 False None None False None False 227138.2984 0 4023108 155956 None 10.19 Providing and fixing 20mm thick gang saw water cut Lakared granite for cladding in CM 1:3 (1 cement : 3 coarse sand) proportion with a coat of rough plastering using CM 1:4 (1 cement : 4 fine sand), cut to required shape, pattern with paper joints, finished with cement mortar using white cement and colour pigments to match the colour of slab making through jointing with sealant, grooves in joints including cost of curing etc., complete including cost and conveyance of all materials, mortar, labour for all items of work, usage charges of machinery etc., complete as per specification Sqm 4047.05 4047.05 56.68 False None None False None False 229386.794 0 4023109 155956 None 9.22.3 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 800x800 mm Sqm 1639.84 1639.84 272.1 False None None False None False 446200.464 0 4023110 155956 None 9.22.3 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 800x800 mm Sqm 1656.07 1656.07 272.1 False None None False None False 450616.647 0 4023111 155956 None 9.11 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by themanufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry at 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc complete Sqm 987.68 987.68 31.49 False None None False None False 31102.0432 0 4023112 155956 None 9.11 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by themanufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry at 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc complete Sqm 997.46 997.46 31.49 False None None False None False 31410.0154 0 4023113 155956 None 9.39 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. Sqm 1609.84 1609.84 126.02 False None None False None False 202872.0368 0 4023114 155956 None 9.39 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. Sqm 1625.78 1625.78 126.02 False None None False None False 204880.7956 0 4023115 155956 None 9.20.1 Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge Sqm 282.19 282.19 31.49 False None None False None False 8886.1631 0 4023116 155956 None 9.20.1 Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge Sqm 284.99 284.99 31.49 False None None False None False 8974.3351 0 4023117 155956 None 9.2 Providing and laying 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed at 2 L per 50 kg of cement or as per direction of Engineer incharge Sqm 880.0 880.0 288.1 False None None False None False 253528.0 0 4023118 155956 None 8.16a Providing lath plaster with cement mortar 1:3, 5cms thick with 6mm dia mild steel bars at 20 cms. c to c both horizontally and vertically fixed with chicken mesh for drop chajja,facia, backing to cup boards including cost of all materials, labour, providing and removing form work usage charges, curing, complete as per specifications.e Sqm 1361.8 1361.8 21.64 False None None False None False 29469.352 0 4023119 155956 None 8.16a Providing lath plaster with cement mortar 1:3, 5cms thick with 6mm dia mild steel bars at 20 cms. c to c both horizontally and vertically fixed with chicken mesh for drop chajja,facia, backing to cup boards including cost of all materials, labour, providing and removing form work usage charges, curing, complete as per specifications.e Sqm 1375.42 1375.42 19.78 False None None False None False 27205.8076 0 4023120 155956 None 8.16a Providing lath plaster with cement mortar 1:3, 5cms thick with 6mm dia mild steel bars at 20 cms. c to c both horizontally and vertically fixed with chicken mesh for drop chajja,facia, backing to cup boards including cost of all materials, labour, providing and removing form work usage charges, curing, complete as per specifications.e Sqm 1389.04 1389.04 26.38 False None None False None False 36642.8752 0 4023121 155956 None 8.51 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge Sqm 110.0 110.0 298.38 False None None False None False 32821.8 0 4023122 155956 None 8.51 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge Sqm 111.1 111.1 835.36 False None None False None False 92808.496 0 4023123 155956 None 8.51 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge Sqm 112.2 112.2 835.36 False None None False None False 93727.392 0 4023124 155956 None 8.51 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge Sqm 113.3 113.3 231.48 False None None False None False 26226.684 0 4023125 155956 None 8.55.2 Applying priming coats with primer of approved brand andmanufacture, having low VOC (Volatile Organic Compound) content.With water thinnable cement primer on wall surface having VOC contentless than 50 g/L as per specifications and as per directions of Engineer in charge Sqm 58.3 58.3 298.38 False None None False None False 17395.554 0 4023126 155956 None 8.55.2 Applying priming coats with primer of approved brand andmanufacture, having low VOC (Volatile Organic Compound) content.With water thinnable cement primer on wall surface having VOC contentless than 50 g/L as per specifications and as per directions of Engineer in charge Sqm 58.88 58.88 835.36 False None None False None False 49185.9968 0 4023127 155956 None 8.55.2 Applying priming coats with primer of approved brand andmanufacture, having low VOC (Volatile Organic Compound) content.With water thinnable cement primer on wall surface having VOC contentless than 50 g/L as per specifications and as per directions of Engineer in charge Sqm 59.47 59.47 835.36 False None None False None False 49678.8592 0 4023128 155956 None 8.55.2 Applying priming coats with primer of approved brand andmanufacture, having low VOC (Volatile Organic Compound) content.With water thinnable cement primer on wall surface having VOC contentless than 50 g/L as per specifications and as per directions of Engineer in charge Sqm 60.05 60.05 232.74 False None None False None False 13976.037 0 4023129 155956 None 8.39 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 139.7 139.7 298.38 False None None False None False 41683.686 0 4023130 155956 None 8.39 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 141.1 141.1 835.36 False None None False None False 117869.296 0 4023131 155956 None 8.39 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 142.49 142.49 835.36 False None None False None False 119030.4464 0 4023132 155956 None 8.39 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 143.89 143.89 232.74 False None None False None False 33488.9586 0 4023133 155956 None 8.30 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 193.31 193.31 343.46 False None None False None False 66394.2526 0 4023134 155956 None 8.30 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 195.23 195.23 343.46 False None None False None False 67053.6958 0 4023135 155956 None 8.30 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 197.14 197.14 267.75 False None None False None False 52784.235 0 4023136 155956 None 11.28 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessaryaccessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Kg 621.5 621.5 306.0 False None None False None False 190179.0 0 4023137 155956 None 11.28 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessaryaccessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge Kg 627.72 627.72 306.0 False None None False None False 192082.32 0 4023138 155956 None 11.28 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessaryaccessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Kg 633.93 633.93 306.0 False None None False None False 193982.58 0 4023139 155956 None 11.28 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessaryaccessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Kg 627.72 627.72 384.42 False None None False None False 241308.1224 0 4023140 155956 None 11.28 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessaryaccessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge Kg 633.93 633.93 384.42 False None None False None False 243695.3706 0 4023141 155956 None 11.5.1 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-inCharge Cum 5073.57 5073.57 2.1 False None None False None False 10654.497 0 4023142 155956 None 13.5 Filler joint (i) Providing & fixing 2 mm thick corrugated copper plate in expansion joint complete as per drawing & Technical Specification.m (ii) Providing & fixing 20 mm thick compressible fibre board in expansion joint complete as per drawing & Technical Specification.m (iii) Providing and fixing in position 20 mm thick premoulded joint filler in expansion joint for fixed ends of simply supported spans not exceeding 10 m to cater for a horizontal movement upto 20 mm, covered with sealant complete as per drawing and technical specifications. (iv) Providing and filling joint sealing compound as per drawings and technical specifications with coarse sand and 6 per cent bitumen by weight m 3526.6 3526.6 13.0 False None None False None False 45845.8 0 4023143 155956 None 13.5 Filler joint (i) Providing & fixing 2 mm thick corrugated copper plate in expansion joint complete as per drawing & Technical Specification.m (ii) Providing & fixing 20 mm thick compressible fibre board in expansion joint complete as per drawing & Technical Specification.m (iii) Providing and fixing in position 20 mm thick premoulded joint filler in expansion joint for fixed ends of simply supported spans not exceeding 10 m to cater for a horizontal movement upto 20 mm, covered with sealant complete as per drawing and technical specifications. (iv) Providing and filling joint sealing compound as per drawings and technical specifications with coarse sand and 6 per cent bitumen by weight m 3561.87 3561.87 13.0 False None None False None False 46304.31 0 4023144 155956 None 13.5 Filler joint (i) Providing & fixing 2 mm thick corrugated copper plate in expansion joint complete as per drawing & Technical Specification.m (ii) Providing & fixing 20 mm thick compressible fibre board in expansion joint complete as per drawing & Technical Specification.m (iii) Providing and fixing in position 20 mm thick premoulded joint filler in expansion joint for fixed ends of simply supported spans not exceeding 10 m to cater for a horizontal movement upto 20 mm, covered with sealant complete as per drawing and technical specifications. (iv) Providing and filling joint sealing compound as per drawings and technical specifications with coarse sand and 6 per cent bitumen by weight m 3597.13 3597.13 13.0 False None None False None False 46762.69 0 4023145 155956 None 13.5 Filler joint (i) Providing & fixing 2 mm thick corrugated copper plate in expansion joint complete as per drawing & Technical Specification.m (ii) Providing & fixing 20 mm thick compressible fibre board in expansion joint complete as per drawing & Technical Specification.m (iii) Providing and fixing in position 20 mm thick premoulded joint filler in expansion joint for fixed ends of simply supported spans not exceeding 10 m to cater for a horizontal movement upto 20 mm, covered with sealant complete as per drawing and technical specifications. (iv) Providing and filling joint sealing compound as per drawings and technical specifications with coarse sand and 6 per cent bitumen by weight m 3632.4 3632.4 13.0 False None None False None False 47221.2 0 4023146 155956 None 2.1.6 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:2:4 Using 20 mm nominal size graded crushed coarse aggregates Cum 7073.32 7073.32 34.12 False None None False None False 241341.6784 0 4023147 155956 None 15.1 Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6 kg/m2 to achieve final DFT (Dry Film Thickness) of 1mm including prime coat of epoxy primer @150 g/m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification Sqm 925.66 925.66 415.8 False None None False None False 384889.428 0 4023148 155956 None 12.74.1 Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete : Nos 112.2 112.2 8.0 False None None False None False 897.6 0 4023149 155956 None 12.74.1 Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete : Nos 113.32 113.32 128.0 False None None False None False 14504.96 0 4023150 155956 None 12.74.1 Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete : Nos 114.44 114.44 132.0 False None None False None False 15106.08 0 4023151 155956 None 22.15.7 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge SS Tower Bolts 250x10mm: Nos 220.0 220.0 8.0 False None None False None False 1760.0 0 4023152 155956 None 22.15.7 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge SS Tower Bolts 250x10mm Nos 222.2 222.2 128.0 False None None False None False 28441.6 0 4023153 155956 None 22.15.7 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge SS Tower Bolts 250x10mm: Nos 224.4 224.4 132.0 False None None False None False 29620.8 0 4023154 155956 None 22.15.2 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge SS SS Handles 300mm : Nos 605.0 605.0 4.0 False None None False None False 2420.0 0 4023155 155956 None 22.15.2 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge SS SS Handles 300mm :. Nos 611.05 611.05 66.0 False None None False None False 40329.3 0 4023156 155956 None 22.15.2 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge SS SS Handles 300mm :. Nos 617.1 617.1 66.0 False None None False None False 40728.6 0 4023157 155956 None 22.15.10 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge SS SS Door stopper 75mm :. Nos 110.0 110.0 2.0 False None None False None False 220.0 0 4023158 155956 None 22.15.10 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge SS SS Door stopper 75mm : Nos 111.1 111.1 32.0 False None None False None False 3555.2 0 4023159 155956 None 22.15.10 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge SS SS Door stopper 75mm :. Nos 112.2 112.2 33.0 False None None False None False 3702.6 0 4023160 155956 None 12.60 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete Nos 1157.2 1157.2 2.0 False None None False None False 2314.4 0 4023161 155956 None 12.60 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete Nos 1168.77 1168.77 32.0 False None None False None False 37400.64 0 4023162 155956 None 12.60 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete: Nos 1180.34 1180.34 33.0 False None None False None False 38951.22 0 4023163 155956 None 22.15.4 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge. SS Aldrop 16mm dia, 300mm Nos 412.5 412.5 2.0 False None None False None False 825.0 0 4023164 155956 None 22.15.4 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge. SS Aldrop 16mm dia, 300mm Nos 416.63 416.63 32.0 False None None False None False 13332.16 0 4023165 155956 None 22.15.4 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge. SS Aldrop 16mm dia, 300mm Nos 420.75 420.75 33.0 False None None False None False 13884.75 0 4023166 155956 None 18.2 Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of structural glazing (with open joints) for linear as well as curvilinear portions of the building for all heights and all levels, including:(a) Structural analysis & design and preparation of shop drawings for the specified design loads conforming to IS 875 part III(the system must passed the proof test at 1.5 times design wind pressurewithout any failure), including functional design of the aluminum sectionsfor fixing glazing panels of various thicknesses, aluminium cleats, sleevesand splice plates etc. gaskets, screws, toggles, nuts, bolts, clamps etc.,structural and weather silicone sealants, flashings, fire stop (barrier)-cumsmoke seals, microwave cured EPDM gaskets for water tightness, pressureequalisation & drainage and protection against fire hazard including:(b)Fabricating and supplying serrated M.S. hot dip galvanised / Aluminiumalloy of 6005 T5 brackets of required sizes, sections and profiles etc. toaccommodate 3 Dimentional movement for achieving perfect verticalityand fixing structural glazing system rigidly to the RCC/ masonry/structural steelframework of building structure using stainless steelanchor fasteners/ bolts, nylon seperator to prevent bimetallic contactswith nuts and washers etc. of stainless steel grade 316, of the requiredc apacity and in required numbers.(c)Providing and filling, two part pumpfilled, structural silicone sealant and one part weather silicone sealantcompatible with the structural silicone sealant of required bite size in aclean and controlled factory / work shop environment, including doublesided spacer tape, setting blocks and backer rod, all of approved grade,brand and manufacture, as per the approved sealant design, within and allaround the perimeter for holding glass.(d)Providing and fixing in positionflashings of solid aluminium sheet 1 mm thick and of sizes, shapes andprofiles, as required as per the site conditions, to seal the gap betweenthe building structure and all its interfaces with curtain glazing to makeit watertight.(e) Making provision for drainage of moisture/ water thatenters the curtain glazing system to make it watertight, by incorporatingprinciples of pressure equalization, providing suitable gutter profiles atbottom (if required), making necessary holes of required sizes and ofrequired numbers etc. complete.2This item includes cost of all inputs of designing, labour for fabricatingand installation of aluminium grid, installation of glazed units, T&P,scaffolding and other incidental charges including wastages etc., enablingtemporary structures and services, cranes or cradles etc. as describedabove and as specified. The item includes the cost of getting all thestructural and functional design including shop drawings checked bya structural designer, dully approved by Engineer-in-charge. The itemalso includes the cost of all mock ups at site, cost of all samples of theindividual components for testing in an approved laboratory, field testson the assembled working structural glazing as specified, cleaning andprotection till the handing over of the building for occupation. In the end,the Contractor shall provide a water tight structural glazing having allthe performance characteristics etc. all complete as required, as per theArchitectural drawings, as per item description, as specified, as per theapproved shop drawings and as directed by the Engineer- in-Charge Sqm 2983.04 2983.04 14.1 False None None False None False 42060.864 0 4023167 155956 None 18.3 Providing, assembling and supplying vision glass panels (IGUs) comprisingof hermetically-sealed 6-12- 6 mm insulated glass (double glazed) vision panel units of size and shape as required and specified, comprising of an outer heat strengthened float glass 6mm thick, of approved colour andshade with reflective soft coating on surface 2 of approved colour and shade, an inner Heat strengthened clear float glass 6mm thick, spacer tube 12mm wide, desiccants, including primary seal and secondary seal (structural silicone sealant) etc. all complete for the requiredperformances, as per the Architectural drawings, as per the approvedshop drawings, as specified and as directed by the Engineer-in-Charge. TheIGUs shall be assembled in the factory/ workshop of the glass processor.(Payment for fixing of IGU Panels in the curtain glazing is included in costof item No.18.2)For payment, only the actual area of glass on face 1 ofthe glass panels (excluding the areas of the grooves and weather siliconesealant) Sqm 3380.77 3380.77 14.1 False None None False None False 47668.857 0 4023168 155956 None 18.2 Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of structural glazing (with open joints) for linear as well as curvilinear portions of the building for all heights and all levels, including:(a) Structural analysis & design and preparation of shop drawings for the specified design loads conforming to IS 875 part III(the system must passed the proof test at 1.5 times design wind pressurewithout any failure), including functional design of the aluminum sectionsfor fixing glazing panels of various thicknesses, aluminium cleats, sleevesand splice plates etc. gaskets, screws, toggles, nuts, bolts, clamps etc.,structural and weather silicone sealants, flashings, fire stop (barrier)-cumsmoke seals, microwave cured EPDM gaskets for water tightness, pressureequalisation & drainage and protection against fire hazard including:(b)Fabricating and supplying serrated M.S. hot dip galvanised / Aluminiumalloy of 6005 T5 brackets of required sizes, sections and profiles etc. toaccommodate 3 Dimentional movement for achieving perfect verticalityand fixing structural glazing system rigidly to the RCC/ masonry/structural steelframework of building structure using stainless steelanchor fasteners/ bolts, nylon seperator to prevent bimetallic contactswith nuts and washers etc. of stainless steel grade 316, of the requiredc apacity and in required numbers.(c)Providing and filling, two part pumpfilled, structural silicone sealant and one part weather silicone sealantcompatible with the structural silicone sealant of required bite size in aclean and controlled factory / work shop environment, including doublesided spacer tape, setting blocks and backer rod, all of approved grade,brand and manufacture, as per the approved sealant design, within and allaround the perimeter for holding glass.(d)Providing and fixing in positionflashings of solid aluminium sheet 1 mm thick and of sizes, shapes andprofiles, as required as per the site conditions, to seal the gap betweenthe building structure and all its interfaces with curtain glazing to makeit watertight.(e) Making provision for drainage of moisture/ water thatenters the curtain glazing system to make it watertight, by incorporatingprinciples of pressure equalization, providing suitable gutter profiles atbottom (if required), making necessary holes of required sizes and ofrequired numbers etc. complete.2This item includes cost of all inputs of designing, labour for fabricatingand installation of aluminium grid, installation of glazed units, T&P,scaffolding and other incidental charges including wastages etc., enablingtemporary structures and services, cranes or cradles etc. as describedabove and as specified. The item includes the cost of getting all thestructural and functional design including shop drawings checked bya structural designer, dully approved by Engineer-in-charge. The itemalso includes the cost of all mock ups at site, cost of all samples of theindividual components for testing in an approved laboratory, field testson the assembled working structural glazing as specified, cleaning andprotection till the handing over of the building for occupation. In the end,the Contractor shall provide a water tight structural glazing having allthe performance characteristics etc. all complete as required, as per theArchitectural drawings, as per item description, as specified, as per theapproved shop drawings and as directed by the Engineer- in-Charge. Sqm 3012.57 3012.57 14.1 False None None False None False 42477.237 0 4023169 155956 None 18.3 Providing, assembling and supplying vision glass panels (IGUs) comprisingof hermetically-sealed 6-12- 6 mm insulated glass (double glazed) visionpanel units of size and shape as required and specified, comprising of anouter heat strengthened float glass 6mm thick, of approved colour andshade with reflective soft coating on surface 2 of approved colour andshade, an inner Heat strengthned clear float glass 6mm thick, spacertube 12mm wide, dessicants, including primary seal and secondaryseal (structural silicone sealant) etc. all complete for the requiredperformances, as per the Architectural drawings, as per the approvedshop drawings, as specified and as directed by the Engineer-in-Charge. TheIGUs shall be assembled in the factory/ workshop of the glass processor.(Payment for fixing of IGU Panels in the curtain glazing is included in costof item No.18.2)For payment, only the actual area of glass on face 1 ofthe glass panels (excluding the areas of the grooves and weather siliconesealant) provided and fixed in position, shall be measured in m2.(i)Coloured tinted float glass 6mm thick substrate with reflective soft coatingon face 2, + 12mm Airgap + 6mm Heat Strengthened clear Glass ofapproved make having properties as visible Light transmittance (VLT) of25 to 35 %, Light reflection internal 10 to 15%, light reflection external10 to 20 %, shading coefficient (0.25-0.28) and U value of 3.0 to 3.3 W/m2 degree K etc. The properties of performance glass shall be decided bytechnical sanctioning authority as per the site requirement. Sqm 3414.25 3414.25 14.1 False None None False None False 48140.925 0 4023170 155956 None 16.9 Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover. Each 5999.4 5999.4 4.0 False None None False None False 23997.6 0 4023171 155956 None 16.15.1 Providing and constructing “WIRE CUT BRICK MACHINEHOLE CHAMBERS” using Portland/Pozzolana cement, conical in shape at top, with CC 1:3:6 foundation using 40mm and down size graded metal of approved quality and with an offset of 0.15M alround the chamber. Construct Brick masonry in CM 1:4, 340 mm thick, with wirecut bricks of approved quality,plaster inside and out side with CM 1:3, 12mm thick, except for the conical surface outside where the plaster thickness shall be 20mm. Slope inside to be 1:6 in the concrete towards central drain and finished smooth. Fixing of pipes in CC 1:2:4 with graded metal of 20mm and down size. Supplying and fixing SFRC Machinehole frame and cover (Heavy Duty) conforming to IS:12592 with latest amendment, in CC 1:2:4. Supplying and fixing footsteps made of 12mm dia. steel bars (Fe-500) with 3mm thick plastic encapsulation (IS-10910). The footsteps shall be fixed 30cms apart and on CC block embeded to masonry wall. The whole works include watering, curing, barricading, danger lighting, pouring tar over MH frame and cover, cost of tar, shoring, strutting, dewatering, engraving Machinehole number with flow direction on the inner conical surface etc. as per the drawing etc. as per technical specifications and for the following diameters and depth etc. for 1.2mm diaCirc. B M.H: Constructing Brick Masonry Circular Machinehole 1.2 m internal dia. , 1.0 M depth & SFRC cover & frame Each 31951.7 31951.7 2.0 False None None False None False 63903.4 0 4023172 155956 None 14.3.1 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid Each 6640.45 6640.45 8.0 False None None False None False 53123.6 0 4023173 155956 None 14.3.1 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid Each 6706.19 6706.19 8.0 False None None False None False 53649.52 0 4023174 155956 None 14.7A Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required: using White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer Each 4578.43 4578.43 8.0 False None None False None False 36627.44 0 4023175 155956 None 14.7A Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required: using White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer Each 4623.76 4623.76 8.0 False None None False None False 36990.08 0 4023176 155956 None 14.8 Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings Each 1580.95 1580.95 8.0 False None None False None False 12647.6 0 4023177 155956 None 14.8 Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings Each 1596.61 1596.61 8.0 False None None False None False 12772.88 0 4023178 155956 None 13.22.1.1 Providing and fixing PTMT grating of approved quality and colour. Circular type.100 mm nominal dia Each 45.55 45.55 24.0 False None None False None False 1093.2 0 4023179 155956 None 13.22.1.1 Providing and fixing PTMT grating of approved quality and colour. Circular type.100 mm nominal dia Each 46.0 46.0 24.0 False None None False None False 1104.0 0 4023180 155956 None 14.28.2.2 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe 40 mm dia Each 102.21 102.21 8.0 False None None False None False 817.68 0 4023181 155956 None 14.28.2.2 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe 40 mm dia Each 103.22 103.22 8.0 False None None False None False 825.76 0 4023182 155956 None 13.50.5 Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External works 40 mm nominal dia Pipes m 337.74 337.74 25.0 False None None False None False 8443.5 0 4023183 155956 None 13.50.5 Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External works 40 mm nominal dia Pipes m 341.09 341.09 25.0 False None None False None False 8527.25 0 4023184 155956 None 13.50.6 Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External works 50 mm nominal dia Pipes m 428.85 428.85 15.0 False None None False None False 6432.75 0 4023185 155956 None 13.50.6 Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External works 50 mm nominal dia Pipes m 433.09 433.09 15.0 False None None False None False 6496.35 0 4023186 155956 None 13.50.8 Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External works 80 mm nominal dia Pipes m 748.81 748.81 15.0 False None None False None False 11232.15 0 4023187 155956 None 13.50.8 Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External works 80 mm nominal dia Pipes m 756.23 756.23 15.0 False None None False None False 11343.45 0 4023188 155956 None 13.50.9 Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External works 100 mm nominal dia Pipes m 1033.23 1033.23 70.0 False None None False None False 72326.1 0 4023189 155956 None 13.50.9 Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External works 100 mm nominal dia Pipes m 1043.46 1043.46 70.0 False None None False None False 73042.2 0 4023190 155956 None 13.59 Providing and fixing PVC (S.W.R) Nahani Trap 10cms x 10cms with all fitting arrangements & all necessary accessories complete Nos 244.42 244.42 16.0 False None None False None False 3910.72 0 4023191 155956 None 13.59 Providing and fixing PVC (S.W.R) Nahani Trap 10cms x 10cms with all fitting arrangements & all necessary accessories complete Nos 246.84 246.84 16.0 False None None False None False 3949.44 0 4023192 155956 None 13.32.2 Providing and fixing Chorinated Poly Vinyl Chloride (CPVC) pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00 mtr spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement & the cost of cutting chases & making good the same including testing of joints complete as per direction of Engineer in charge. Concealed work including cutting chases and making good walls etc. 20mm Nominal dia Pipes m 421.07 421.07 120.0 False None None False None False 50528.4 0 4023193 155956 None 13.32.2 Providing and fixing Chorinated Poly Vinyl Chloride (CPVC) pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00 mtr spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement & the cost of cutting chases & making good the same including testing of joints complete as per direction of Engineer in charge. Concealed work including cutting chases and making good walls etc. 20mm Nominal dia Pipes m 425.24 425.24 120.0 False None None False None False 51028.8 0 4023194 155956 None 13.32.4 Providing and fixing Chorinated Poly Vinyl Chloride (CPVC) pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00 mtr spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement & the cost of cutting chases & making good the same including testing of joints complete as per direction of Engineer in charge. Concealed work including cutting chases and making good walls etc. 20mm Nominal dia Pipes m 618.83 618.83 15.0 False None None False None False 9282.45 0 4023195 155956 None 13.32.4 Providing and fixing Chorinated Poly Vinyl Chloride (CPVC) pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00 mtr spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement & the cost of cutting chases & making good the same including testing of joints complete as per direction of Engineer in charge. Concealed work including cutting chases and making good walls etc. 20mm Nominal dia Pipes m 624.95 624.95 15.0 False None None False None False 9374.25 0 4023196 155956 None 13.33.6 Providing and fixing Chorinated Poly Vinyl Chloride (CPVC) pipes conforming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this includes jointing of pipes and fittings with one step solvent cement, trenching, refilling & testing of joints complete. as per direction of Engineer in charge. external work 50 mm Nominal dia Pipes m 816.89 816.89 50.0 False None None False None False 40844.5 0 4023197 155956 None 13.6.1.1 Providing and fixing gun metal non- return valve of approved quality (screwed end) 25 mm nominal bore 13.6.1.1 Horizontal Nos 702.46 702.46 5.0 False None None False None False 3512.3 0 4023198 155956 None 13.6.2 Providing and fixing gun metal non- return valve of approved quality (screwed end) 25 mm nominal bore 13.6.1.2 vertical : Nos 787.44 787.44 5.0 False None None False None False 3937.2 0 4023199 155956 None 14.40.2 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g. Each 551.06 551.06 8.0 False None None False None False 4408.48 0 4023200 155956 None 14.40.2 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g Each 556.51 556.51 8.0 False None None False None False 4452.08 0 4023201 155956 None 13.63 Providing and fixing PVC (S.W.R) Multi Floor Trap 10.0 cm X 7.5 cm X 5.0cm X 4.0 cm with all fitting arrangements & all necessary accessories complete Each 271.08 271.08 8.0 False None None False None False 2168.64 0 4023202 155956 None 13.63 Providing and fixing PVC (S.W.R) Multi Floor Trap 10.0 cm X 7.5 cm X 5.0cm X 4.0 cm with all fitting arrangements & all necessary accessories complete Each 273.77 273.77 8.0 False None None False None False 2190.16 0 4023203 155956 None 13.12 Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 Each 705.49 705.49 24.0 False None None False None False 16931.76 0 4023204 155956 None 13.12 Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 Each 712.47 712.47 24.0 False None None False None False 17099.28 0 4023205 155956 None 13.16 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 Each 688.82 688.82 8.0 False None None False None False 5510.56 0 4023206 155956 None 13.16 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 Each 695.64 695.64 8.0 False None None False None False 5565.12 0 4023207 155956 None 13.20.2 Providing and fixing PTMT pillar cock of approved quality and colour. 15 mm nominal bore, 125 mm long foam flow, weighing not less than 120 gms Each 348.85 348.85 8.0 False None None False None False 2790.8 0 4023208 155956 None 13.20.2 Providing and fixing PTMT pillar cock of approved quality and colour. 15 mm nominal bore, 125 mm long foam flow, weighing not less than 120 gms Each 352.31 352.31 8.0 False None None False None False 2818.48 0 4023209 155956 None 13.15 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931 Each 805.48 805.48 24.0 False None None False None False 19331.52 0 4023210 155956 None 13.15 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931 Each 813.45 813.45 24.0 False None None False None False 19522.8 0 4023211 155956 None 14.75 Providing and fixing Wall Mixer Non Telephonic made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class Economy. Each 3392.99 3392.99 8.0 False None None False None False 27143.92 0 4023212 155956 None 14.75 Providing and fixing Wall Mixer Non Telephonic made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class Economy Each 3426.59 3426.59 8.0 False None None False None False 27412.72 0 4023213 155956 None 13.26 Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 g. Each 111.1 111.1 8.0 False None None False None False 888.8 0 4023214 155956 None 13.26 Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 g. Each 112.2 112.2 8.0 False None None False None False 897.6 0 4023215 155956 None Approved rate item no. 09 dated 09-02-2018 Supplying and fixing "JAGUAR" Make C.P Health Faucet Cat No ALD 573 with 1.00m Tube and hook including necessary screws, accessories etc., completeThe rate including necessary threads, white lead, washers, all labour charges all lead lift, loading and unloading, transportation charges, and all other incidental charges etc., complete as per the directions of Engineer in charge of the work. Each 5000.0 5000.0 16.0 False None None False None False 80000.0 0 4023216 155956 None 14.81a Providing and fixing Overhead rain showers of minimum dimension225x225mm & wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class economy Each 1200.99 1200.99 8.0 False None None False None False 9607.92 0 4023217 155956 None 14.81a Providing and fixing Overhead rain showers of minimum dimension225x225mm & wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class economy Each 1212.88 1212.88 8.0 False None None False None False 9703.04 0 4023218 155956 None 13.36 Cutting holes up to 30x30 cm in walls including making good the same:With common burnt clay F.P.S. Each 358.85 358.85 8.0 False None None False None False 2870.8 0 4023219 155956 None 13.36 Cutting holes up to 30x30 cm in walls including making good the same:With common burnt clay F.P.S Each 362.41 362.41 8.0 False None None False None False 2899.28 0 4023220 155956 None 14.31 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. Each 1355.42 1355.42 8.0 False None None False None False 10843.36 0 4023221 155956 None 14.31 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washerscomplete. Each 1368.84 1368.84 8.0 False None None False None False 10950.72 0 4023222 155956 None 13.8.2.1 Providing and fixing unplasticised PVC connection pipe with brass unions :.15 mm nominal bore Each 101.1 101.1 24.0 False None None False None False 2426.4 0 4023223 155956 None 13.34 Providing and placing on Terrace (at all floor levels) Polyethylene water storage tank IS: 12701 marked with cover and sutable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank Ltr 10.2 10.2 10000.0 False None None False None False 102000.0 0 4023224 155956 None 13.49 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes of 150mm dia conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. m 643.54 643.54 50.0 False None None False None False 32177.0 0 4023225 155956 None 10.1.10 Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. PVC pipes 200mm dia., 6 kg/sqcm & class 3 m 1263.3 1263.3 50.0 False None None False None False 63165.0 0 4023226 155956 None 10.1.7 Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. PVC pipes 110mm dia., 6 kg/sqcm & class 3 m 465.66 465.66 50.0 False None None False None False 23283.0 0 4023227 155956 None 16.23.2 Providing and fixing SFRC frame and cover conforming to IS 12592 (part-I)-1988 and IS 12592 (part-II)- 1991 with latest amendment, including cutting slabs to the required size for the opening and fixing the cover in C.C. 1:2:4 and C.M. 1:3 plastering 20 mm thick to all exposed faces, curing for 10 days with all lead and lift with appurtenances. complete. Set 2820.4 2820.4 1.0 False None None False None False 2820.4 0 4023228 155956 None 12.4 Geophysical investigation at site for sinking borewells for supplying drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical sounding by adopting Venner or Schlumbergers’s method, including reconnaissance survey of geological formation. Geophysical investigation of existing ground water in the vicinity, its quality, quantity and acceptability of the users, indicating the location of the site, recommended depth of casing pipe required to seal the top unconsolidated formation including an extra depth of 1.0 metre in consolidated formation for proper seating of casing pipe, depth of drilling required to cover full depth of aquifer proposed to be tapped, probable yield and other information required including transportation of instruments and accessories to work site, engaging technical personal and labour required etc. NOTE: 1) Additional rate on item 1&2 is allowed for drilling in over burden and fixing Casing pipes beyond 20 M (for fixing Casing pipes only) a) Above 20 M and upto 30 M - 15%, b) Above 30 M - 30% (Measurement of overburden is restricted to the depth of casing pipe fixed excluding initial depth of 20M and projection above ground level). 2) A sum of Rs. 100/- is to be deducted for Dry Borewell towards yield test. Each 5816.8 5816.8 2.0 False None None False None False 11633.6 0 4023229 155956 None 12.1.2 Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete ) (Above 450m of drilling add 10% for every 50m depth) m 407.0 407.0 50.0 False None None False None False 20350.0 0 4023230 155956 None 12.1.2 Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete ) (Above 450m of drilling add 10% for every 50m depth) m 510.4 510.4 50.0 False None None False None False 25520.0 0 4023231 155956 None 12.1.3 Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete ) (Above 450m of drilling add 10% for every 50m depth) m 542.3 542.3 50.0 False None None False None False 27115.0 0 4023232 155956 None 12.1.4 Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete ) (Above 450m of drilling add 10% for every 50m depth) m 629.2 629.2 50.0 False None None False None False 31460.0 0 4023233 155956 None 12.1.5 Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete ) (Above 450m of drilling add 10% for every 50m depth) m 738.1 738.1 50.0 False None None False None False 36905.0 0 4023234 155956 None 12.32 Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and latest ammendments, electrical resistance welded steel tubes, material And conforming to IS 1387-1993 and manufactured by basic open hearth electric or basic oxygen process in random length of 5-7m both ends.threaded conforming to IS 554-1985 one end fixed with socket conforming to IS 4270-2001 and the other end with screwed pipes all shall be responsibaly free from defects. The tubes shall be responsible straight end should be with ISI marking weighing 25.10kg/m.prices include Collar-Medium duty m 2126.3 2126.3 25.0 False None None False None False 53157.5 0 4023235 155956 None 12.34 Providing and laying at site of work MS casing caps as per IS 1239 (part II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum). The dimensions of caps and colars shall be strictly as per IS 1239 (Part-II) 1982 with all amendments including cost of material and labour charges for fixing, if any etc. complete with all lead and lifts and as directed by the Engineer in charge Each 180.4 180.4 1.0 False None None False None False 180.4 0 4023236 155956 None 13.40.13 Supply and delivery of Centrifugal pumpset at site brand new best make and with discharge duty confirming to ISI standards and its latest amendments 20 HP, size 100x80 and 42M, Discharge 1320 LPM Each 72509.8 72509.8 1.0 False None None False None False 72509.8 0 4023237 155956 None 13.32 Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well caps, cable clips and water tight gland cable protectors, bolts, nuts, valve and gauges,tools and equipments etc., involved in the job as per specifications, with necessary tests as per specifications, with testing of as per instructions of engineer incharge of work. Job 7150.0 7150.0 1.0 False None None False None False 7150.0 0 4023238 155956 None 13.22.4 Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendments 1x3x6 Sqm. m 203.5 203.5 250.0 False None None False None False 50875.0 0 4023239 155956 None 13.23.3 Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog Voltmeter 1ni with Phase selector switch, Isolating switch OUTGOING for Main Electrical Pump: 1 No. MCB 1 No. DOL of S/D Starter suitable for respective HP 1 No. Electrcal Protection Like single Phase preventor, under voltage over Volage, under current over current & dry run protection suitable for the pump described above 1 no Indoor type NOTE: 1) DOL- Direct Online Starter 2) S-D- Star Delta Starter etc. complete 6 to 15 HP pumps Each 17490.0 17490.0 1.0 False None None False None False 17490.0 0 4023240 155956 None 13.25.1 Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments Size 50 mm Each 1375.0 1375.0 2.0 False None None False None False 2750.0 0 4023241 155956 None 11.15.4 Supply and delivery at site GM (copper alloy) gate valves confirming to Class-I as per IS 778 with latest amendments, 1 No. screwed in bonnet inside screw, rising spring spindle integral seat screwed females ends confirming to IS 554/ 1990 body hydraulically tested 1.5HP seat standard tested 1 HP with IS mark-For 32 mm dia GM (Copper alloy) Gate valves Each 1471.8 1471.8 1.0 False None None False None False 1471.8 0 4023242 155956 None 13.32.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. m 416.9 416.9 300.0 False None None False None False 125070.0 0 4023243 155956 None 1.1.1 Open Conduit System Supplying heavy gauge PVC conduit pipe . dia . mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted wood plugs in case of RCC ceiling and RCC wall/ stone structure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws.19/20 mm dia 2 mm thick Mtr 75.9 75.9 310.0 False None None False None False 23529.0 0 4023244 155956 None 1.1.2 Supplying heavy gauge PVC conduit pipe . dia . mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted wood plugs in case of RCC ceiling and RCC wall/ stone structure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws.25 mm dia 2 mm thick Mtr 89.1 89.1 160.0 False None None False None False 14256.0 0 4023245 155956 None 1.2.2 Concealed Conduit System Supplying heavy gauge PVC conduit pipe . mm dia.mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary 25 mm dia 2 mm thick Mtr 85.8 85.8 2110.0 False None None False None False 181038.0 0 4023246 155956 None 1.2.3 Supplying heavy gauge PVC conduit pipe . mm dia.mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary 32 mm dia 2.5 mm thick Mtr 113.3 113.3 355.0 False None None False None False 40221.5 0 4023247 155956 None 1.3.1 Supplying heavy gauge PVC Conduit Pipe . dia . mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering upto the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary. 19/20 mm dia 2 mm thick Mtr 74.8 74.8 910.0 False None None False None False 68068.0 0 4023248 155956 None 1.3.2 Supplying heavy gauge PVC Conduit Pipe . dia . mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering upto the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary. 25 mm dia 2 mm thick Mtr 86.9 86.9 1580.0 False None None False None False 137302.0 0 4023249 155956 None 1.3.3 Supplying heavy gauge PVC Conduit Pipe . dia . mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering upto the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary. 32 mm dia 2.5 mm thick Mtr 108.9 108.9 380.0 False None None False None False 41382.0 0 4023250 155956 None 1.4.7 Supplying and fixing sheet Metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc. 200 x 200 x 65 mm Each 382.8 382.8 10.0 False None None False None False 3828.0 0 4023251 155956 None 1.5.1 Supplying and fixing PVC/metal conduit Deep junction box 19/20 mm deep Junction box Each 53.9 53.9 50.0 False None None False None False 2695.0 0 4023252 155956 None 1.5.2 Supplying and fixing PVC/metal conduit Deep junction box 25 mm deep Junction box Each 61.6 61.6 40.0 False None None False None False 2464.0 0 4023253 155956 None 1.5.3 Supplying and fixing PVC/metal conduit Deep junction box 32 mm deep Junction box Each 67.1 67.1 15.0 False None None False None False 1006.5 0 4023254 155956 None 1.9.2 Supplying PVC flexible conduit pipe . mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300 mm using NF screws and on either end of the pipe terminated completely 25 mm Mtr 24.2 24.2 120.0 False None None False None False 2904.0 0 4023255 155956 None 1.11 Supplying And Fixing "S" Hook made out of 14 mm dia M.S. Rod. No 57.2 57.2 20.0 False None None False None False 1144.0 0 4023256 155956 None 1.12 Supplying And Fixing M.S. Rafter Clamp Set made out of M.S. Flat & 14 mm M.S. rod. No 176.0 176.0 20.0 False None None False None False 3520.0 0 4023257 155956 None 1.13 Supplying And Fixing Metal Fan Box with Round Hook. No 128.7 128.7 20.0 False None None False None False 2574.0 0 4023258 155956 None 2.2 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Short point upto 3Mtr from tapping point to out let via switch box Point 295.9 295.9 115.0 False None None False None False 34028.5 0 4023259 155956 None 2.2.2 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Medium point above 3Mtr upto 6Mtr from tapping point to out let via switch box Point 416.9 416.9 65.0 False None None False None False 27098.5 0 4023260 155956 None 2.2.3 Long point above 6Mtr upto 10Mtr from tapping point to out let via switch box Point 610.5 610.5 45.0 False None None False None False 27472.5 0 4023261 155956 None 2.3.1 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:2010 1 mm2 Mtr 20.9 20.9 1890.0 False None None False None False 39501.0 0 4023262 155956 None 2.3.2 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:2010 1.5 mm2 Mtr 28.6 28.6 2780.0 False None None False None False 79508.0 0 4023263 155956 None 2.3.3 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:2010 2.5 mm2 Mtr 46.2 46.2 1940.0 False None None False None False 89628.0 0 4023264 155956 None 2.3.4 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:2010 4 mm2 Mtr 69.3 69.3 2370.0 False None None False None False 164241.0 0 4023265 155956 None 2.3.5 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:2010 6 mm2 Mtr 101.2 101.2 615.0 False None None False None False 62238.0 0 4023266 155956 None 3.4.1 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 1-2 Way Each 151.8 151.8 76.0 False None None False None False 11536.8 0 4023267 155956 None 3.4.2 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 3 Way Each 174.9 174.9 18.0 False None None False None False 3148.2 0 4023268 155956 None 3.4.3 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 4-5 Way Each 194.7 194.7 29.0 False None None False None False 5646.3 0 4023269 155956 None 3.4.4 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 6 Way Each 242.0 242.0 31.0 False None None False None False 7502.0 0 4023270 155956 None 3.4.5 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 8 Way Each 287.1 287.1 33.0 False None None False None False 9474.3 0 4023271 155956 None 3.5.1 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 1 to 2 Module Each 150.7 150.7 76.0 False None None False None False 11453.2 0 4023272 155956 None 3.5.2 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 3 Module Each 177.1 177.1 18.0 False None None False None False 3187.8 0 4023273 155956 None 3.5.3 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 4 Module Each 192.5 192.5 29.0 False None None False None False 5582.5 0 4023274 155956 None 3.5.4 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 6 Module Each 257.4 257.4 31.0 False None None False None False 7979.4 0 4023275 155956 None 3.5.5 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 8 Module Cm/weight 312.4 312.4 33.0 False None None False None False 10309.2 0 4023276 155956 None 3.6.1 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A One Way Switch Each 112.2 112.2 295.0 False None None False None False 33099.0 0 4023277 155956 None 3.6.2 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A Two Way Switch Each 182.6 182.6 8.0 False None None False None False 1460.8 0 4023278 155956 None 3.6.3 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A Three Way socket Each 188.1 188.1 132.0 False None None False None False 24829.2 0 4023279 155956 None 3.6.4 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator Two Module Each 392.7 392.7 18.0 False None None False None False 7068.6 0 4023280 155956 None 3.6.7 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 16A One Way Switch Each 198.0 198.0 38.0 False None None False None False 7524.0 0 4023281 155956 None 3.6.8 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A Bell Push Each 194.7 194.7 18.0 False None None False None False 3504.6 0 4023282 155956 None 3.6.10 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16A Universal Socket Each 259.6 259.6 38.0 False None None False None False 9864.8 0 4023283 155956 None 3.6.11 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. TV/Telephone Socket Each 171.6 171.6 18.0 False None None False None False 3088.8 0 4023284 155956 None 3.6.12 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. RJ45/I.O Outlet Cat-6 (3.6.12) Each 370.7 370.7 20.0 False None None False None False 7414.0 0 4023285 155956 None 3.8 Supplying 4mm thick plastic sheet with necessary nitches for fixing switches, regulators etc, and fixing on existing wooden or metal box using N.F. screws. Cum 0.46 0.46 32200.0 False None None False None False 14812.0 0 4023286 155956 None 3.10.1 Supplying 4 mm thick white plastic plate and covering for junction boxes of size . mm conduit using necessary machine screws. 60 mm No 8.8 8.8 32.0 False None None False None False 281.6 0 4023287 155956 None 3.10.2 Supplying 4 mm thick white plastic plate and covering for junction boxes of size . mm conduit using necessary machine screws. 80/90 mm No 16.5 16.5 16.0 False None None False None False 264.0 0 4023288 155956 None 3.10.3 Supplying 4 mm thick white plastic plate and covering for junction boxes of size . mm conduit using necessary machine screws. 110 mm No 23.1 23.1 16.0 False None None False None False 369.6 0 4023289 155956 None 3.13.5 Supplying and fixing of metal clad industrial plugs and sockets.2pole+earth 250V SOCKET 16A Each 584.07 584.07 2.0 False None None False None False 1168.14 0 4023290 155956 None 3.13.6 Supplying and fixing of metal clad industrial plugs and sockets. 2pole+earth 250V SOCKET 32A Each 733.74 733.74 2.0 False None None False None False 1467.48 0 4023291 155956 None 3.13.7 Supplying and fixing of metal clad industrial plugs and sockets. 3pole+earth 440V SOCKET 16A Each 697.16 697.16 2.0 False None None False None False 1394.32 0 4023292 155956 None 3.13.8 Supplying and fixing of metal clad industrial plugs and sockets. 3pole+earth 440V SOCKET 32A Each 910.6 910.6 2.0 False None None False None False 1821.2 0 4023293 155956 None 4.2.2 Fabricating, supplying and erection of . ms long hot dip Galvanized Octagonal hot dip Pole with BSEN 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangements, including suitable boards, Bakelite sheet and MCBs as per IS specifications suitable to withstand the wind speed of 47 m/s for .m Pole in single section and single joint welded as per IS 9595/IS10178AWS having dimensions bottom . mm , top. mm with 3 mm thick, suitable base plate and 4Nos of . long J bolts along with template and the Pole shall be hot dip galvanized in single dipping with not less than 65micron as per ASTM-A123 and 153 etc., (excluding foundation) as per drawing appended. 4 m - Top 70 mm and Bottom 130 mm dia Each 9020.0 9020.0 2.0 False None None False None False 18040.0 0 4023294 155956 None 4.6.1 Supplying, and fixing of Hot dip Galvanized M.S.Bracket suitable for out door luminaries and mounted on Octagonal pole using necessary bolts, nuts etc., complete. Single Arm Bracket with 1000 mm Standard 40/50 mm dia Each 1870.0 1870.0 2.0 False None None False None False 3740.0 0 4023295 155956 None 5.4.3 Fixing a shunt capacitor of . kVAR capacity with necessary clamps, bolts, and nuts on existing wooden or metal board including banking of more than one capacitor.11 to 20 kVAR Each 378.4 378.4 3.0 False None None False None False 1135.2 0 4023296 155956 None 5.14.3 Supply and fixing of 4pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947. 40 A Each 6730.9 6730.9 2.0 False None None False None False 13461.8 0 4023297 155956 None 5.15.1 Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuitwith adjustable thermal magnetic release, Micro processor release shall have Earth Fault as per IS/IEC 60947-2 . (Icu=100% lcs). In 4P MCCB, all Poles should have protection for Short-Cicrcuit/Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB. MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism. THREE Pole 100 A 25 kA Each 6694.6 6694.6 5.0 False None None False None False 33473.0 0 4023298 155956 None 5.15.9 Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuitwith adjustable thermal magnetic release, Micro processor release shall have Earth Fault as per IS/IEC 60947-2 . (Icu=100% lcs). In 4P MCCB, all Poles should have protection for Short-Cicrcuit/Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB. MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism. FOUR Pole 100 A 25 kA Each 9335.7 9335.7 11.0 False None None False None False 102692.7 0 4023299 155956 None 5.15.10 Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuitwith adjustable thermal magnetic release, Micro processor release shall have Earth Fault as per IS/IEC 60947-2 . (Icu=100% lcs). In 4P MCCB, all Poles should have protection for Short-Cicrcuit/Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB. MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism. FOUR Pole 125 A 25 kA Each 11375.1 11375.1 1.0 False None None False None False 11375.1 0 4023300 155956 None 5.15.14 Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuitwith adjustable thermal magnetic release, Micro processor release shall have Earth Fault as per IS/IEC 60947-2 . (Icu=100% lcs). In 4P MCCB, all Poles should have protection for Short-Cicrcuit/Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB. MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism. FOUR Pole 200 A 36 kA Each 23566.4 23566.4 1.0 False None None False None False 23566.4 0 4023301 155956 None 5.15.17 Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuitwith adjustable thermal magnetic release, Micro processor release shall have Earth Fault as per IS/IEC 60947-2 . (Icu=100% lcs). In 4P MCCB, all Poles should have protection for Short-Cicrcuit/Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB. MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism. FOUR Pole 320-400 A 50 kA Each 33122.1 33122.1 1.0 False None None False None False 33122.1 0 4023302 155956 None 5.16 Supplying and fixing of Shunt trip suitable for MCCB.CBCT Each 1873.3 1873.3 2.0 False None None False None False 3746.6 0 4023303 155956 None 5.17.1 Supplying and fixing regular MCCB distribution Panel confirming to IS/IEC 61439 - 3 and IK09 tested as per IS/IEC 62262 with minimum IP43 protection provided with Polyurethane (PUR) gasket, with suitable earthing system, on wall/wood board/flush mounting using required cl A , bolts, nuts, etc., with provision for fixing of suitable type capacity MCCB's as an incomer for 3 phase Double door with necessary bus bar completely wired to use on 440V 3phase 4 wire powder coated painting etc., complete with a provision for fixing of single/three phase suitable capacity MCB's as outgoings confirming to IS/IEC 60898 - 2. 4 Way Each 11361.9 11361.9 5.0 False None None False None False 56809.5 0 4023304 155956 None 5.18.4 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 6-32 A DP Each 812.9 812.9 39.0 False None None False None False 31703.1 0 4023305 155956 None 5.18.8 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 40 A TPN Each 3348.4 3348.4 2.0 False None None False None False 6696.8 0 4023306 155956 None 5.18.9 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 50-63 A TPN Each 3396.8 3396.8 55.0 False None None False None False 186824.0 0 4023307 155956 None 5.19.7 Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS enclosure. II - Double Door 6 Way SP & N Each 1970.1 1970.1 17.0 False None None False None False 33491.7 0 4023308 155956 None 5.19.12 Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS enclosure. III - Double Door 6 Way TP & N Each 5434.0 5434.0 3.0 False None None False None False 16302.0 0 4023309 155956 None 5.20.1 Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board. 16A-25A 2 pole Each 4704.7 4704.7 17.0 False None None False None False 79979.9 0 4023310 155956 None 5.20.8 Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board. 32-40A 4 pole Each 5661.7 5661.7 3.0 False None None False None False 16985.1 0 4023311 155956 None 5.21 Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of percentage leakage current, programmable delay/auto/ manual reset facility suitable to mount on DIN rail/ flush mounting on panel board Each 10180.5 10180.5 3.0 False None None False None False 30541.5 0 4023312 155956 None 5.29 Supplying, fixing and wiring 3 Phase Digital Ammeter / Voltmeter Each 1567.5 1567.5 3.0 False None None False None False 4702.5 0 4023313 155956 None 5.31 Supplying and fixing Electronic Trivector Meter (ETV) suitable for operation LT operation and -CT operated meter in polycarbonate body in class 0.5 accuracy as per IS 14697 and completely wired. Each 4829.0 4829.0 1.0 False None None False None False 4829.0 0 4023314 155956 None 5.34 Supplying, fixing and wiring 50/5 to 400/5A 5VA burden Current Transformer Class 0.5 accuracy with Tape Wound. Each 618.2 618.2 12.0 False None None False None False 7418.4 0 4023315 155956 None 5.38 Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C. Each 566.5 566.5 9.0 False None None False None False 5098.5 0 4023316 155956 None 5.39 Supplying, fixing and wiring Automatic Power Factor controller circuit unit fully, static units controlled by 14 stage microprocessor operation, relays LED display, self programming function for power stages and operating logic checking facility for healthy and efficient of each individual capacitor bank, measurement of network harmonics with indication when limit values are exceeded, Comprehensive displays with large, three phase LED display, Long term memory for settings, protection for over voltage, power factor correction fault and no voltage, to connect/ disconnect banks, with automatic recognition or with standard programs Each 23804.0 23804.0 1.0 False None None False None False 23804.0 0 4023317 155956 None 5.37 Supplying, fixing and wiring heavy duty low voltage capacitors conforming to IS 2834. 3 phase, 400/440 V grade, for power factor improvement of rotating machineries like induction motor. Kvar 528.0 528.0 60.0 False None None False None False 31680.0 0 4023318 155956 None 5.40.1 Supplying . A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete Mtr 2711.5 2711.5 9.4 False None None False None False 25488.1 0 4023319 155956 None 5.40.2 Supplying . A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete 250 A 4 x 30 x 10 mm Aluminium Strips Mtr 3778.5 3778.5 1.8 False None None False None False 6801.3 0 4023320 155956 None 5.40.3 Supplying . A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete 400 A 4 x 50 x 10 mm Aluminium Strips Mtr 4889.5 4889.5 3.0 False None None False None False 14668.5 0 4023321 155956 None 5.41.2 Supplying and fixing angle iron frame work fabricated out of M.S. angle iron. and M.S. Flat.with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. 50 x 50 x 6 mm Mtr 434.5 434.5 36.0 False None None False None False 15642.0 0 4023322 155956 None 5.42.2 Fabricating supplying and mounting MS box made out .SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour etc., complete. 16 SWG Cum 0.47 0.47 362800.0 False None None False None False 170516.0 0 4023323 155956 None 5.48 Supplying and fixing Microprocessor Based Astronomical timer Switch with using necessary bolts, nuts and washers. Each 5327.3 5327.3 1.0 False None None False None False 5327.3 0 4023324 155956 None 5.52.2 Supply and fixing of 3-pole Capacitor switching contactor with NO/NC contacts and inbuilt damping resistor to protect the contactor and capacitor from highest inrush current , fixed on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC 690V Rating operational voltage, 50HZ frequency and as per IS 60947-4-1. 22 KVAR Each 5035.8 5035.8 3.0 False None None False None False 15107.4 0 4023325 155956 None 5.61 Supply, Installation Commissioning of lighting control automation -Wired PIR Motion Sensor PI R sensors shall be deployed for on demand lighting/ electric requirement PI R sensor directly activates/ deactivates the end devices which are all wired together Each 5768.4 5768.4 6.0 False None None False None False 34610.4 0 4023326 155956 None 6.1 Supplying exhaust fan of 1440 RPM of 300 mm (12") size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply. Each 1641.2 1641.2 20.0 False None None False None False 32824.0 0 4023327 155956 None 6.3.1 Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball bearing system. 48" Sweep (1200 mm) Regular model Each 3282.4 3282.4 17.0 False None None False None False 55800.8 0 4023328 155956 None 7.2.1 Supplying .litres capacity vertical/horizontal type wall mounting Electrical water heater with 22 SWG copper/SS sheet metal inner Container tinned inside Fiber body outside, filled with glass wool between inner and outer container for thermal insulation complete. The inlet and outlet pipes so arranged that water flow inside results in water to flow out from the inner container without turbulence. The Inner container shall have direct immersion type copper tube nickel plate. 2kW capacity element with a neon indicator fitted with 20A capacity 25 to 85 degree Centigrade range thermostat. The water heater shall completely be wired with 40/0.0076 inch 3 core copper flexible wire of 1.5 meters length and the outer container provided with heavy gauge brackets for wall mounting. 5 Star With Fibre body 25 L Each 13121.9 13121.9 16.0 False None None False None False 209950.4 0 4023329 155956 None 8.1 NETWORKING & TELECOMUNICATION Supplying and drawing UTP-CAT 6E LAN cable. Mtr 41.8 41.8 670.0 False None None False None False 28006.0 0 4023330 155956 None 8.2.1 Supplying and drawing PVC flexible one pair telephone unarmoured tinned copper cable. 1Pair Mtr 16.5 16.5 390.0 False None None False None False 6435.0 0 4023331 155956 None 8.2.6 Supplying and drawing PVC flexible one pair telephone unarmoured tinned copper cable. 10pair Mtr 89.1 89.1 80.0 False None None False None False 7128.0 0 4023332 155956 None 8.2.8 Supplying and drawing PVC flexible one pair telephone unarmoured tinned copper cable. 50pair Mtr 446.6 446.6 25.0 False None None False None False 11165.0 0 4023333 155956 None 8.3 Supplying and drawing PVC insulated gas injected physical foam jelly flooded co-axial TV cable.RG-6. Mtr 48.4 48.4 480.0 False None None False None False 23232.0 0 4023334 155956 None 8.4.1 Supplying & Fixing of switch mounting rack with power manager & Cable manager. 4U with 450mm depth Each 5381.2 5381.2 3.0 False None None False None False 16143.6 0 4023335 155956 None 8.10.2 Supplying & fixing of I/O socket with back box Double I/O Each 605.0 605.0 17.0 False None None False None False 10285.0 0 4023336 155956 None 8.12.3 Supplying & Fixing of Patch panel for LAN cabling 16 Port 10/100 patch panel Each 3355.0 3355.0 3.0 False None None False None False 10065.0 0 4023337 155956 None 8.13.1 Supplying and fixing of MDF krone junction box with KRONE Module / Telephone cable termination. 10 Pair Mtr 379.5 379.5 2.0 False None None False None False 759.0 0 4023338 155956 None 8.13.4 Supplying and fixing of MDF krone junction box with KRONE Module / Telephone cable termination. 50 pair Mtr 694.1 694.1 1.0 False None None False None False 694.1 0 4023339 155956 None 10.1.7 Supplying, installing, testing and commissioning of Diesel Generator set with following specifications. Power rating as per standard reference condition as per-BS 5514/ISO 3046/ ISO 8528 & IS 1002/ISO 3046 Generator set specifications. Engine: Diesel generating set are rated at 1500RPM and conform to ISO 8528 specifications. The engines are radiator cooled, four stroke and multi cylinder, conforming to ISO 3046. The scope of supply includes: Electrical starter motor12V DC Battery charging alternator, Bosch fuel system with mechanical governor, A1 Class. Spin-on lube oil filter, Spin-on dual fuel filter with water separator, Turbocharger, Charge air cooler, Silencer (Hospital grade), Dry type air cleaner, Shutoff coil, Flywheel and flywheel housing, First fill of lube oil and coolant, Safety for low lube oil pressure, Safety for high water temperature, Permissible overload of 10% for one hour in 12 hours of operation Acoustic enclosure: The acoustic enclosure shall be made of 1.6 mm thick CRCA sheets in suitable approved shade and a structural/ sheet metal base frame painted in black. The walls of the enclosure are insulated with fire retardant foam so as to comply with the 75dBA at 1 m sound levels specified by Ministry of Environment & Forest The enclosure has the following features: Specially designed to meet stringent MOEF/CPCB norms of 75dBA @ 1 m at 75% load under free field conditions, Two point lifting for easy handling at customer site, Designed to have optimum serviceability, Air inlet louvers specially designed to operate at rated load made on special purpose CNC machines for consistency in quality and workmanship, Powder coated for long lasting service life and superior finish, With UV resistant powder coating, can withstand extreme environment, Use of special hardware for longer life, Insulation material meets exacting IS 8183 specifications for better sound attenuation, Flush styling - no projections, Fluid drains for lube oil and fuel, Fuel filling point inside the enclosure. The complete set shall have sufficient safety and adhere to NEC, NBC 2016, IEC, CPWD specifications, PCB norms and KSGEI Acts and Rules. 62.5KVA/50kw Set 705178.1 705178.1 1.0 False None None False None False 705178.1 0 4023340 155956 None 10.2.3 Supply, Erection, testing and commissioning of AMF panel suitable for .kVA DG set. The panel is of cubical type base/floor mounting control panel with hinged doors, undrilled bottom gland plate, aluminium Bus Bar with the accommodation for .A 4 pole contactor for alternator with thermal O/L relay,. A 4 pole contactor for mains, HRC fuse for short circuit protection, Microprocessor based AMF module with supply failure timer, Restoration timer, 3 impulse automatic engine start/stop logic, Mains/generator voltage, .capacity bypass switch and frequency sensing, PCC 1301controller with water temperature/Lube oil pressure/ engine speed, Voltage/ampere/Frequency/ kVA, Running-hour count, No of starts, Fault indication, over / under speed, Fails to start, Low oil pleasure, High engine temperature, Under/over voltage, over current, Earth fault relay, with indications for Mains on, Load on Mains, Battery charger on Push buttons AMF module by pass Mode, Battery charger unit with inbuilt Auto/Manual and Flat/Boost facility. The complete set shall have sufficient safety and adhere to NEC, NBC 2016, IEC, CPWD specifications, PCB norms and KSGEI Acts and Rules. 62.5 KVA Each 85544.8 85544.8 1.0 False None None False None False 85544.8 0 4023341 155956 None 11.7.2 Supply of LED pole mounting type post top lantern with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate clear glass material, delivering superior light outputRated life Burning Hrs 50000 hr at Lumen Maintenance of 70 percent, CCT greater then 5500K, IP 66 optical and electrical compartment and impact resistance of complete luminaire greater then IK08. Power Factor greater then 0.9 with mains, Surge Protection Min 5KV along with Over voltage Overload, short circuit miss-wiring protection. Compatible for pole mounting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50 60Hz application. Compliance to IS 10322 1 EC 60598, LM 79 and LM 80 Adherence with RoHS. UL approved MCPCB LED Efficiency grater than 1301mw, nominal CRI grater than75. Luminaire manufacturer should have in house facility accredited by NABL/CPRI and any Government certified agency and Design and Development facility certified by ISO 9001:2008. Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer and Cree/Nichia/ Lumileds/Osram make LED Source. LED Post Top Lantern with 25/30 W Each 9884.16 9884.16 2.0 False None None False None False 19768.32 0 4023342 155956 None 11.8.3 Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output Rated life Burning Hrs 50000 hr at Lumen Maintenance of 70 percent, maximum light intensity should be between 60 degrees to 70 degrees. CCT greater than 5500K, IP66 optical and electrical compartment & impact resistance of complete luminaire greater than IK08. Power Factor greater than 0.9 with mains, Surge Protection Min 5KV along with Over voltage/ Overload, short circuit/ miss wiring protection. Compatible for pole mounting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 and LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with W System Power consumption. LED Efficiency greater than 1301m/w, nominal CRI greater than 75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI and any Government certified agency & Design & Development facility certified by ISO 9001:2008. Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/ Lumileds/Osram make LED Source. LED Streetlight 70W Each 6591.2 6591.2 2.0 False None None False None False 13182.4 0 4023343 155956 None 11.8.5 Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output Rated life Burning Hrs 50000 hr at Lumen Maintenance of 70 percent, maximum light intensity should be between 60 degrees to 70 degrees. CCT greater than 5500K, IP66 optical and electrical compartment & impact resistance of complete luminaire greater than IK08. Power Factor greater than 0.9 with mains, Surge Protection Min 5KV along with Over voltage/ Overload, short circuit/ miss wiring protection. Compatible for pole mounting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 and LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with W System Power consumption. LED Efficiency greater than 1301m/w, nominal CRI greater than 75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI and any Government certified agency & Design & Development facility certified by ISO 9001:2008. Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/ Lumileds/Osram make LED Source. LED Streetlight 120 W Each 11066.0 11066.0 4.0 False None None False None False 44264.0 0 4023344 155956 None 11.10.5 Supplying & fixing of Surface mounting type retrofit type LED tube W comprising of LED linear source with CCT 6500 degree K, CRI greater than 70percent. efficacy greater than 80 lumen per W, life greater than 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 and LM 80. The LED are driven by HF electronic driver integrated in the system, with PF greater than 0.95, power loss should lesser than 5 percent of lamp Wage short circuit and open circuit protection to be integrated in the circuit, THD less than 20 percent , Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition.Polycarbonate/OPAL Acrylic Casing 18W-20W (T8) Each 751.3 751.3 90.0 False None None False None False 67617.0 0 4023345 155956 None 11.14.1 Supplying and fixing of slim box fitting, made out of CRCA Sheet metal body with locking type holder completely wired. Excluding Ballast & Fluorescent Tube. 1 x 2' Tube light fitting. Each 272.8 272.8 32.0 False None None False None False 8729.6 0 4023346 155956 None 11.14.2 Supplying and fixing of slim box fitting, made out of CRCA Sheet metal body with locking type holder completely wired. Excluding Ballast & Fluorescent Tube.1 x 4' Tube light fitting. Each 397.1 397.1 90.0 False None None False None False 35739.0 0 4023347 155956 None 11.15 Supplying and fixing of LED Bulkhead of 10W with IP65 protection and IK 08 impact resistance suitable for surface and wall mounting applications. Each 926.2 926.2 10.0 False None None False None False 9262.0 0 4023348 155956 None 12.2.1 Supplying and fixing one of 230 V Ding dong bell and a flush type bell push with gang box fixed on necessary wooden or rawl plugs using NF screws with Remote. Ding Dong Bell Each 270.6 270.6 17.0 False None None False None False 4600.2 0 4023349 155956 None 12.56 Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit should be filled with equal proportion of salt and charcoal 150 mm all-round the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI wire of size as per lSI specification 7.3.3. of IS 732 using 12 mm dia bolts, nuts, washers and check nuts etc., the pipe shall have 16 through holes of 12 mm dia No 3861.0 3861.0 11.0 False None None False None False 42471.0 0 4023350 155956 None 12.57 Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40 mm dia 2.9 mm thick 2.5m long GI pipe with GI funnel with mesh and suitable size reducer fixed on the top of the earth electrode.The funnel should be enclosed in a CC chamber of 400x400x400 mm with a cast iron cover. The earth electrode shall have staggered holes of 12 mm dia and the electrode should be covered 150 mm all-round with alternate layers of salt and charcoal from the bottom of the CC chamber. The connection from the electrode is to be established through GI strip using GI bolts and nuts. No 4681.6 4681.6 6.0 False None None False None False 28089.6 0 4023351 155956 None 12.58.2 GI/Copper strips for grounding connections, using necessary fixing materials as required.25 x 3 mm GI strip Mtr 90.2 90.2 92.0 False None None False None False 8298.4 0 4023352 155956 None 12.58.6 GI/Copper strips for grounding connections, using necessary fixing materials as required. 600 x 600 x 3 mm GI Plate Each 962.5 962.5 11.0 False None None False None False 10587.5 0 4023353 155956 None 12.58.11 GI/Copper strips for grounding connections, using necessary fixing materials as required.600 x 600 x 3 mm Copper plate Each 8163.1 8163.1 6.0 False None None False None False 48978.6 0 4023354 155956 None 12.59.1 2 mm thick perforated cable GI tray with on existing MS angle support using necessary GI bolts/nuts and washer or welding as required.150 x 50 mm Mtr 509.3 509.3 15.0 False None None False None False 7639.5 0 4023355 155956 None 12.59.2 2 mm thick perforated cable GI tray with on existing MS angle support using necessary GI bolts/nuts and washer or welding as required. 300 x 50 mm Mtr 645.7 645.7 10.0 False None None False None False 6457.0 0 4023356 155956 None 13.4.1 Supplying and fixing telescopic M.S. bracket fabricated by using 0.5m length 4" dia telescopic M. S. pipe, with 2" dia1.5m long M.S.Bracket and are welded with suitable angle, using 6mm thick M. S. sheet, grip bolts & nuts, as required, suitable for 9 to 12 ms. M. S. tubular pole, with necessary two coats of painting, with all other accessories. Single bracket 1.5 m. Length Each 1607.1 1607.1 4.0 False None None False None False 6428.4 0 4023357 155956 None 13.5 Fixing halogen/metal halide /SVL/IL/LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires. Each 178.2 178.2 4.0 False None None False None False 712.8 0 4023358 155956 None 13.6 Fixing charges of post top/ Gate/ Garden fitting /LED on the existing CI/ GI or any other pipe using required size of reducer, wiring using suitable wires. Each 217.8 217.8 2.0 False None None False None False 435.6 0 4023359 155956 None 13.7.1 Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, required Nos of round blocks and clamps. On wall/ ceiling / Rafter / Girders Each 134.2 134.2 122.0 False None None False None False 16372.4 0 4023360 155956 None 13.10 Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing 'S'' hook with fan regulator to the existing board together with supplying and fixing 5 A. ceiling rose, necessary length of 23 / 0.0076 inch PVC insulated twin twisted copper wire and wiring. Each 188.1 188.1 17.0 False None None False None False 3197.7 0 4023361 155956 None 13.14 Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts and 5 A. ceiling rose with sufficient length of 23/0.0076 inch PVC insulated twin core wire. Each 541.2 541.2 20.0 False None None False None False 10824.0 0 4023362 155956 None 13.15.1 Erection charges for fixing a . litres capacity wall mounting electric geysers using bolts, flat at one end nut and washers at the other end for through bolts and nuts and washers with 150x450x600mm back plate and wiring complete with 15A 3 pin top. upto 30 Litres Each 730.4 730.4 16.0 False None None False None False 11686.4 0 4023363 155956 None 14.00 Design, supplying, erecting testing and commissioning of - Passenger/ Bed-cum-passenger hospital lift with speed of 1mtr per second, variable voltage variable frequency drive, with or without machine room for the available well size, operating at 415 V 3 phase 50 cycles AC supply, powder coated / Stainless Steel car entrance doors enclosures with suitable colour vinyl flooring, LED car illumination, emergency light, intercom and fan as desired by the user, central opening / side opening door with or without attendant operation, 7 segment display buttons, call register indicator, fireman drive, SS handrails inside car, full length infrared curtain in car door, automatic rescue device with batteries, voice announcing in regional/ international languages, Braille buttons with one year warranty and maintenance with necessary scaffolding and minor civil works like fixing of guide rail, counter weight etc., The total product and services shall adhere to IS 14665/2016 ( with latest amendments) part/section 1 to 5 with regards to general guidelines of fire safety rated doors, MRLL beams, pressure switch, manual change over for doors during emergency, ARD of 10 times with sufficient battery back up and standard dimensions of chair car and door openings for all sizes and capacities of lifts including fitness certificate and duly observing all other safety norms prescribed and adhere to CPWD specifications, PCB Norms, National Electricity Code (NEC), NBC-2016, IEC and Karnataka State Lifts, Escalators and Passengers Conveyers Act 2012 and Rules 2014. The Supplier shall be registered in Government Electrical Inspectorate in the State of Karnataka. SS Finish Machine Room-less 10 Passenger Capacity, 3Stops Job 1679109.3 1679109.3 1.0 False None None False None False 1679109.3 0 4023364 155956 None 14.00 Design, supplying, erecting testing and commissioning of - Passenger/ Bed-cum-passenger hospital lift with speed of 1mtr per second, variable voltage variable frequency drive, with or without machine room for the available well size, operating at 415 V 3 phase 50 cycles AC supply, powder coated / Stainless Steel car entrance doors enclosures with suitable colour vinyl flooring, LED car illumination, emergency light, intercom and fan as desired by the user, central opening / side opening door with or without attendant operation, 7 segment display buttons, call register indicator, fireman drive, SS handrails inside car, full length infrared curtain in car door, automatic rescue device with batteries, voice announcing in regional/ international languages, Braille buttons with one year warranty and maintenance with necessary scaffolding and minor civil works like fixing of guide rail, counter weight etc., The total product and services shall adhere to IS 14665/2016 ( with latest amendments) part/section 1 to 5 with regards to general guidelines of fire safety rated doors, MRLL beams, pressure switch, manual change over for doors during emergency, ARD of 10 times with sufficient battery back up and standard dimensions of chair car and door openings for all sizes and capacities of lifts including fitness certificate and duly observing all other safety norms prescribed and adhere to CPWD specifications, PCB Norms, National Electricity Code (NEC), NBC-2016, IEC and Karnataka State Lifts, Escalators and Passengers Conveyers Act 2012 and Rules 2014. The Supplier shall be registered in Government Electrical Inspectorate in the State of Karnataka. SS Finish Machine Room-less 13 Passenger Capacity, 3Stops Job 1910175.3 1910175.3 1.0 False None None False None False 1910175.3 0 4023365 155956 None 40.01 DAS Specification Compact RMU (VCB/SF6 Type) as per IEC 62271 The DAS RMUs shall have the following in addition to the Standards: DC motors, Numerical Relays, Multi- functional meters, fault passage indicator (FPI), Metering CTs, Protection CTs, Auxiliary transformers, Potential transformer, Batteries, Battery chargers (12 V 24 V), AC power socket and light for illumination of Control panel.Control cable from each panel shall be wired and terminated to suitable 24 pin connector in the control panel Suitable space for fixing the Remote Terminal Unit (RTU) and Radio Modem in Control panel.Suitable Clamps for fixing Antenna Pipe "3 Way RMU, 2OD + 1VL (One Incomer + One Breakers + One Outgoing) 630 Amps with Copper Busbar. Material Code:302490" Unit 867073.9 867073.9 1.0 False None None False None False 867073.9 0 4023366 155956 None 36.01 11 kV, 3 Core, XPLE HTUG Cable with pressure extruded inner sheeth, ROUND WIRE ARMOURED as per IS-7098 (Part-2) Armouring wires dia and Resistivity as per IS-3975 95 Sqmm, (54 GI Wires - 2.5 mm Dia) Material Code:287400 Km 978632.6 978632.6 0.015 False None None False None False 14679.489 0 4023367 155956 None 45.04 Heat Shrinkable Indoor Type Cable Termination Kit for XLPE Cable. 3x95 Sqmm Material Code:288332 Set 4118.4 4118.4 6.0 False None None False None False 24710.4 0 4023368 155956 None 45.07 Heat Shrinkable Outdoor Type Cable Termination Kit for XLPE Cable 3x95 Sqmm Material Code:288302 Set 4473.7 4473.7 2.0 False None None False None False 8947.4 0 4023369 155956 None 45.01 Heat Shrinkable Type Transition Jointing Kit for XLPE Cable 3x95 Sqmm. Material Code:288312 Set 11270.6 11270.6 1.0 False None None False None False 11270.6 0 4023370 155956 None 32.03 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part- 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 10 Sqmm, 4 Core, (10 GI Strips - 4 x 0.8 mm) Material Code:287205 Km 129804.4 129804.4 0.175 False None None False None False 22715.77 0 4023371 155956 None 32.05 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part- 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 16 Sqmm, 4 Core, (11 GI Strips - 4 x 0.8 mm) Material Code:287206 Km 156026.2 156026.2 0.11 False None None False None False 17162.882 0 4023372 155956 None 32.12 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part- 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 50 Sqmm, 4 Core, (17 GI Strips - 4 x 0.8 mm) Material Code:287209 Km 227913.4 227913.4 0.15 False None None False None False 34187.01 0 4023373 155956 None 32.14 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part- 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 95 Sqmm, 3.5 Core, (21 GI Strips - 4 x 0.8 mm) Material Code:287211 Km 410536.5 410536.5 0.008 False None None False None False 3284.292 0 4023374 155956 None 32.17 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part- 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 185 Sqmm, 3.5 Core, (28 GI Strips - 4 x 0.8 mm) Material Code:287214 Km 760339.8 760339.8 0.1 False None None False None False 76033.98 0 4023375 155956 None 32.18 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part- 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 240 Sqmm, 3.5 Core, (30 GI Strips - 4 x 0.8 mm) Material Code:287209 Km 948932.6 948932.6 0.18 False None None False None False 170807.868 0 4023376 155956 None 32.20 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part- 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 400 Sqmm, 3.5 Core, (39 GI Strips - 4 x 0.8 mm) Material Code:287218 Km 1598815.9 1598815.9 0.005 False None None False None False 7994.0795 0 4023377 155956 None 4.06 Construction of platform with size stone, cement concert for erection of 500 kVA Transformer/Metering cubicle/Heavy Equipment. Construction of platform (1.5x1.5x1.2) Mtr in size stone, for erection of transformers/Heavy equipment including all materials, labour. Excavation of (1.5x1.5x1) Mtr pit for foundation providing and laying cement concrete 1:4:8 for foundation laid in 10 cm thick layers, well compacted curing etc., complete providing and construction of stone masonary 0.9 Mtr below ground level and 1.2 Mtr above ground level neatly hammer dressed in cement morter 1:6. Providing and Laying cement concrete slab 1.5x1.5x0.10 Mtr with cement concrete of 1:2:4 mix forming & cutting complete, providing pointing to stone masonary in cement morter 1:3 after racking joint & nisely lining curing etc., plastering the concrete surfaces in cement morter 1:4 including smooth randering curing etc., curing at every stages completely. Per Structure 33397.1 33397.1 1.0 False None None False None False 33397.1 0 4023378 155956 None 58.01 11 kV HT Metering cubicle of different CT Ratio, Both side cable entry type with 3 CT & 3 PT, With Transparent Cover TTB, with 30x8 mm Copper Busbar, Modem & 2 No of Meters for 3 Phase 4 Wire Metering without Load Break Switch (HT Metering Box Fabricated out of 3 mm MS Sheet duly epoxy powder coated) as per revised Specification. Material Code:358351 (Dwg No. BESCOM/GM/QS&S/- Dtd 24.11.2018) Unit 267819.2 267819.2 1.0 False None None False None False 267819.2 0 4023379 155956 None 9.01 Erection of HT Metering Cubicle, LT Metering Cubicle, LT Feeder Piller Box, LT Distribution Box HT Metering Cubicle, LT Metering Cubicle Erection of HT metering Cubicle on Platform. No 2028.4 2028.4 1.0 False None None False None False 2028.4 0 4023380 155956 None 20.01 Transporting Cable from Store to work spot including loading and unloading (including Crane and other equipment charges if any) HT Cable 3x95 to 150 Sqmm Per Km 21244.3 21244.3 0.015 False None None False None False 318.6645 0 4023381 155956 None 20.05 Transporting Cable from Store to work spot including loading and unloading (including Crane and other equipment charges if any) LT Cable.2.5 to 25 Sqmm (Single/3.5/4 Core) Per Km 1305.7 1305.7 0.285 False None None False None False 372.1245 0 4023382 155956 None 20.06 Transporting Cable from Store to work spot including loading and unloading (including Crane and other equipment charges if any) LT Cable.35 to 95 Sqmm (3.5/4 Core) Per Km 2623.5 2623.5 0.158 False None None False None False 414.513 0 4023383 155956 None 20.07 Transporting Cable from Store to work spot including loading and unloading (including Crane and other equipment charges if any) LT Cable 120 to 240 Sqmm (3.5/4 Core) Per Km 2973.3 2973.3 0.28 False None None False None False 832.524 0 4023384 155956 None 21.01 Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff HT Cable 3x95 to 150 Sqmm Km 67454.2 67454.2 0.015 False None None False None False 1011.813 0 4023385 155956 None 21.05 Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff.LT Cable 2.5 to 25 Sqmm Km 22974.6 22974.6 0.285 False None None False None False 6547.761 0 4023386 155956 None 21.06 Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff.LT Cable 35 to 95 Sqmm Km 34252.9 34252.9 0.158 False None None False None False 5411.9582 0 4023387 155956 None 21.08 Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff.LT Cable 300 to 400 Sqmm Km 37593.6 37593.6 0.28 False None None False None False 10526.208 0 4023388 155956 None 22.01 Cable Joint and wiring (for HT & LT UG Cable) HT UG Cable Heat shrinkable Straight Through Joint 3x95 to 3x150 Sqmm Set 3132.8 3132.8 1.0 False None None False None False 3132.8 0 4023389 155956 None 23.04 Transporting of RMU Transporting RMU (Compact) unit from store to work spot including loading, unloading. (No separate crane charges) 1 Panel No 8145.5 8145.5 3.0 False None None False None False 24436.5 0 4023390 155956 None 23.06 Fixing foundation frame of channels and angle iron welding fixing in concrete aligning the RMU on foundation bed, assembly of units, connecting Bus Bars from panel to panel initial filling of oil etc., complete. 1 Panel No 5326.2 5326.2 3.0 False None None False None False 15978.6 0 4023391 155956 None AR 001 Lettering the RMU with enamel paint and also writing single line diagram of each panel, caution Board, Danger Board etc., including cost of Paint, Brush etc., Per Panel 1057.1 1057.1 1.0 False None None False None False 1057.1 0 4023392 155956 None AR 002 Supply Installation testing and fixing of 5MP IR Dome Camera (6.0mm Lens with Aperture of F1.6 (By Default) / F2.0 (On demand)) 1/2.8 SONY CMOS (STARVIS Series) 5MP, 0Lux with IR LED ON Horizontal Field of View 54 degrees and IR Range of up to 30 meters Video Analytics: Trip Wire, Intrusion Detection and Motion Detection H.265/H.264/MJPEG Video Compression PoE Support, NAS Storage, Quad Stream Support True WDR, 3D Noise Reduction, Adaptive Streaming, Smart Streaming and ROI, SNR Greater than 70 dB BIS, CE, FCC, RoHS, IK10, IP67 NDAA . Items of work are including cost and conveyance of all materials, labour charges for all items of work with all lead and lift, loading and unloading and HOM of machineries, 2nd Generation etc., complete as per directions of the Engineer-in-charge of the work complete as per directions of the Engineer-in-charge of the work Nos 9400.0 9400.0 7.0 False None None False None False 65800.0 0 4023393 155956 None AR 003 Supply Installation testing and fixing of 64Channel NVR with 8SATA Port 64 Channel NVR with 4K Support and 8 HDD Slots 64 IP Channel Inputs; 4K HDMI, 1/1 Audio I/O and 2/1 Alarm I/O 12MP, 8MP, 5MP, 4MP, 3MP, 2MP, 720p, D1 and CIF Recording Resolution 4x 4K/ 10x 3MP/16x 1080p Local Decoding 8 SATA HDD Support (Maximum 10TB Capacity per Slot, Hard Disk Not Included) Save Storage Space with Adaptive Recording and Camera-wise Recording Retention 512Mbps Throughput - 256 Uplink, 256 Downlink Cascading: Create Mutiple NVR Clusters to Monitor and Control Multiple Matrix NVRs Centrally ONVIF and Major Camera Brands Support. Items of work are including cost and conveyance of all materials, labour charges for all items of work with all lead and lift, loading and unloading and HOM of machineries, 2nd Generation etc., complete as per directions of the Engineer-in-charge of the work Nos 216000.0 216000.0 1.0 False None None False None False 216000.0 0 4023394 155956 None AR 004 Supply Installation testing and fixing of SEAGATE-AV-HARD DISK - 8 TB Height (mm/in)3 26.1mm/1.028in Width (mm/in, max)3 101.85mm/4.010in,Depth (mm/in, max)3 147.0mm/5.787in,Weight (g/lb) 780g/1.72lb,Carton Unit Quantity 20,Cartons per Pallet / Cartons per Layer 40 / 8 (FOR EACH NVR 8 HDD). Items of work are including cost and conveyance of all materials, labour charges for all items of work with all lead and lift, loading and unloading and HOM of machineries, 2nd Generation etc., complete as per directions of the Engineer-in-charge of the work Nos 24000.0 24000.0 2.0 False None None False None False 48000.0 0 4023395 155956 None AR 005 Supply, installation, testing and commissioning of 8 Port PoE GIGABIT SWITCH With with 2 Gigabit SFP Ports,2 uplink ports, supporting 1GB connectivity on every port D-link. Items of work are including cost and conveyance of all materials, labour charges for all items of work with all lead and lift, loading and unloading and HOM of machineries, 2nd Generation etc., complete as per directions of the Engineer-in-charge of the work Nos 7800.0 7800.0 3.0 False None None False None False 23400.0 0 4023396 155956 None AR 006 Supply Installation testing and fixing of Media Converter giagport. Items of work are including cost and conveyance of all materials, labour charges for all items of work with all lead and lift, loading and unloading and HOM of machineries, 2nd Generation etc., complete as per directions of the Engineer-in-charge of the work Nos 7600.0 7600.0 2.0 False None None False None False 15200.0 0 4023397 155956 None AR 007 Charges for Optical fiber splicing with fiber patch cords , Gigaport media converter. Item of work is inclusive of cost and conveyance labour for all items of work with lead and lift, loading and unloading and HOM of machineries, 2nd Generation etc., complete as per directions of the Engineer-in-charge of the work Nos 10500.0 10500.0 2.0 False None None False None False 21000.0 0 4023398 155956 None AR 008 Supplying and drawing 6 core Optical Fiber Cable as per Technical Specification. The work should be carried out as per the directions of the Engineer incharge of the work. AR Mtr 280.0 280.0 80.0 False None None False None False 22400.0 0 4023399 155956 None AR 009 WORK STATION FOR MONITORING CCTV CAMERA Supply, installation, testing and commissioning New Inspiron 3880 Desktop 10th Gen Intel Core i7-10700F processor(8-Core, 16M Cache, 2.9GHz to 4.8GHz) laptop Windows 10 Home Single Language, English videocard NVIDIA GeForce GT 730 4 GB GDDR5 memory 8GB, 8Gx1, DDR4, 2933MHz harddrive 512GB M.2 PCIe NVMe Solid State Drive fallbackcolor L6 Chassis,260W PSU,Broze/EPA chassis (Approved Rate) Nos 102000.0 102000.0 1.0 False None None False None False 102000.0 0 4023400 155956 None AR 010 55 LED Display Rs 117000+28% GST, Panasonic 55 inch (1920 x 1080) Full HD Basic LED TV (Panasonic), (Panasonic LH-55RM1DX), Resoluction (pixels) (1920x1080) Full HD, Category Basic Speaker 10W x 2, Warranty 3 year Energy Star Rating 3, GENERIC Type LED TV Screen Size 55 inch, resolution (Pixels) (1920x1080) Full HD, Static contract Ration (Min 1000:1), 10000-1, Category Basic. Mounting both table and wall wount, body colour black screen mirroring notavaliable, speakers 10 x 2, pot/connectivity, HDMI port avaliable USB port Available VGA port available, eternet port notavailable. Nos 149760.0 149760.0 1.0 False None None False None False 149760.0 0 4023401 155956 None AR 011 Labour Charges for errection of LED Display Televisions & Complete Connected Accessories Nos 3500.0 3500.0 1.0 False None None False None False 3500.0 0 4023402 155956 None 13.18.5 Fixing of . A TPST / change over switch / Contactor along with neutral link with screws, bolts, nuts and wiring using required capacity wires and circuit labelling. 100A to 250A TPDT/COS Each 518.1 518.1 1.0 False None None False None False 518.1 0 4023403 155956 None 13.18.6 Fixing of . A TPST / change over switch / Contactor along with neutral link with screws, bolts, nuts and wiring using required capacity wires and circuit labelling. 300A to 400A TPDT/COS Each 655.6 655.6 1.0 False None None False None False 655.6 0 4023404 155956 None 5.12.2 Supplying of on load change over switches 4 poles, AC-23A Duty, 415V, 50Hz, AC Supply. With all accessories. (SM Enclosure Sheet Metal Execution) 100 A Each 9387.4 9387.4 1.0 False None None False None False 9387.4 0 4023405 155956 None 5.12.6 Supplying of on load change over switches 4 poles, AC-23A Duty, 415V, 50Hz, AC Supply. With all accessories. (SM Enclosure Sheet Metal Execution) 400 A Each 36236.2 36236.2 1.0 False None None False None False 36236.2 0 4023406 155956 None 5.14.6 Supply and fixing of 4pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947. 95/100 A Each 18266.6 18266.6 1.0 False None None False None False 18266.6 0 4023407 155956 None 5.14.14 Supply and fixing of 4pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947. 400 A Each 64043.1 64043.1 1.0 False None None False None False 64043.1 0 4023408 155956 None 6.11.1 Supplying and fixing of heavy duty cable glands suitable for UG cable of 1.1 KV class (metal only) (42/6.11) KPWD Electrical SR 2019-20 19/20mm (42/6.11.1) Each 74.8 74.8 20.0 False None None False None False 1496.0 0 4023409 155956 None 6.11.5 Supplying and fixing of heavy duty cable glands suitable for UG cable of 1.1 KV class (metal only) (42/6.11) KPWD Electrical SR 2019-20 50mm dia (42/6.11.5) Each 280.5 280.5 20.0 False None None False None False 5610.0 0 4023410 155956 None 6.11.7 Supplying and fixing of heavy duty cable glands suitable for UG cable of 1.1 KV class (metal only) (42/6.11) KPWD Electrical SR 2019-20 75mm dia (42/6.11.7) Each 545.6 545.6 8.0 False None None False None False 4364.8 0 4023411 155956 None 6.11.8 Supplying and fixing of heavy duty cable glands suitable for UG cable of 1.1 KV class (metal only) (42/6.11) KPWD Electrical SR 2019-20 100mm dia (42/6.11.8) Each 1061.5 1061.5 16.0 False None None False None False 16984.0 0 4023412 155956 None 6.17.5 Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. (43/6.17) KPWD Electrical SR 2019-20 10 sqmm (43/6.17.5) Each 8.8 8.8 80.0 False None None False None False 704.0 0 4023413 155956 None 6.17.6 Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. (43/6.17) KPWD Electrical SR 2019-20 16 sqmm (43/6.1.6) Each 13.68 13.68 48.0 False None None False None False 656.64 0 4023414 155956 None 6.17.9 Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. (43/6.17) KPWD Electrical SR 2019-20 50 sqmm Long Barrel(43/6.17.9) Each 66.0 66.0 40.0 False None None False None False 2640.0 0 4023415 155956 None 6.17.11 Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. (43/6.17) KPWD Electrical SR 2019-20 95 sqmm Long Barrel(43/6.17.11) Each 159.5 159.5 24.0 False None None False None False 3828.0 0 4023416 155956 None 6.17.14 Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. (43/6.17) KPWD Electrical SR 2019-20 185 sqmm Long Barrel(43/6.17.14) Each 359.7 359.7 16.0 False None None False None False 5755.2 0 4023417 155956 None 6.17.15 Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. (43/6.17) KPWD Electrical SR 2019-20 240 sqmm Long Barrel(43/6.17.15) Each 509.3 509.3 16.0 False None None False None False 8148.8 0 4023418 155956 None 6.17.17 Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. (43/6.17) KPWD Electrical SR 2019-20 400 sqmm Long Barrel(43/6.17.17) Each 1041.7 1041.7 24.0 False None None False None False 25000.8 0 4023419 155956 None AR 87 Supply Installation testing and fixing of 5MP IR Bullet Camera (6.0mm Lens with Aperture of F1.6 (By Default) F2.0 (On demand)) 1/2.8 SONY - CMOS (STARVIS Series) 5MP, 0Lux with IR LED ON Horizontal Field of View: 54 degrees and IR Range of up to 30 meters Video Analytics: Trip Wire, Intrusion Detection and Motion Detection H.265 H.264 MJPEG Video Compression PoE Support, NAS Storage, Quad Stream Support True WDR, 3D Noise Reduction, Adaptive Streaming, Smart Streaming and ROI, SNR greater than 70 dB BIS, CE, FCC, IP67 and RoHS starNDAA. Items of work are including cost and conveyance of all materials, labor charges for all items of work with all lead and lift, loading and unloading and HOM of machineries, 2nd Generation etc., complete as per directions of the Engineer-in-charge of the work No 11200.0 11200.0 7.0 False None None False None False 78400.0 0
generalCriterionList	createdTs version createdDate modifiedDate criterionType description tenderEligibilityCriterionDocumentList 1726656287000 0 None None ELIGIBILITY Tenders from Joint ventures are not acceptable. None 1726656287000 0 None None ELIGIBILITY Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka None 1726656287000 0 None None ELIGIBILITY Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document. None 1726656287000 0 None None ELIGIBILITY It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission. None 1726656287000 0 None None ELIGIBILITY EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection. None 1726661893000 0 None None ELIGIBILITY The tenderer shall bear all costs associated with the preparation and submission of his tender, and the employer will in no case be responsible and liable for those costs. None 1726661927000 0 None None ELIGIBILITY The employer is not responsible for any delay in accessing E Procurement Portal None 1726661943000 0 None None ELIGIBILITY Royalty on construction materials and other taxes will be deducted as per prevailing Govt orders. None 1726661978000 0 None None ELIGIBILITY As per Karnataka state Government order LD/300/LET/2006 Bangalore dated 01.01.2007 and Government letter no PW/ 134/ BMS /2007 dated 27.07.2007, a sum amounting to 1% of the bill amount will be deducted towards constructions labour welfare fund None 1726661997000 0 None None ELIGIBILITY Materials like bitumen,steel,cement etc.,required for the work shell be procured by the tenderer themselves and should got tested by the quality control authority before use on the work. None 1726662025000 0 None None ELIGIBILITY All the formats prescribed in the bid document shall be filled by the tenderer in complete manner otherwise it will be rejected None 1726662045000 0 None None ELIGIBILITY All scanned documents to be uploaded shall be in original, Submit the original document at the time of technical bid opening or next day and the Executive Engineer reserves the right to verify the original documents before approval. None 1726662058000 0 None None ELIGIBILITY The employer reserves the rights to Reject or accept any or all the tenders without assigning any reasons None 1726662071000 0 None None ELIGIBILITY The contractors assessed available tender capacity shall be more than the tender value, it will be calculated as per the STD tender document Attached None 1726662082000 0 None None ELIGIBILITY The Tender processing fee shall not be refundable None 1726662094000 0 None None ELIGIBILITY The tenderer who qualifying in the technical bid such tenderer financial bid will be opened None 1726662110000 0 None None ELIGIBILITY Contractor should establish a fully functional laboratory at site at no extra cost in order to carry out all the required tests for the materials being used in the project. None 1726662539000 0 None None ELIGIBILITY Contractor should take all precautions to ensure that no damage is caused to the existing similar structures which have been constructed by other agencies during project execution. If any damage is caused, it has to be rectified at his own risk and cost None 1726662609000 0 None None ELIGIBILITY Contractor should carry out additional test required to test the suitability of materials before using the same to the work. None 1726662728000 0 None None ELIGIBILITY Formation levels and other data furnished are bare minimum the contractor should make all efforts to validate and to get additional data if required at his own cost Contractor should execute the project with least impact to the environment None 1726662760000 0 None None ELIGIBILITY When Structure constructed disputes arising on account of damages to the existing bunds Structure and other private properties, if any, has to be resolved by the contractor. All precautions should be taken by the contractor so that there are no damages to such public /private properties None 1726662776000 0 None None ELIGIBILITY Contractor should take all precautionary measures to avoid any damage to the utilities during excavation as well as utility shifting. To that extent the contractor should indemnify the client. None 1726662784000 0 None None ELIGIBILITY Contractor should follow strictly the prevailing rules of labour act. None 1726662809000 0 None None ELIGIBILITY The Bidder shall not furnish any fake/fabricated/false information or withhold facts etc., if the bidder is found to have violated any of these above (found either during evaluation or after awarding the tender), the tender shall be rejected and action as per rules and regulations shall be taken against the Bidder. None 1726662830000 0 None None ELIGIBILITY If the Successful Bidder has quoted lesser rates than the estimated rates then he should without fail remit the Unbalanced Tender Amount along with the Security Deposit within the stipulated time as that shall be specified in the Letter of Acceptance, failing which the tender of the Successful Bidder shall be rejected None 1726662873000 0 None None ELIGIBILITY The bidders should submit the Bid capacity compulsorily. The details of balance work B value (works on hand & works for which tender submitted). Should be submitted in the prescribed format & should be signed by the concerned Executive Engineer / District level officer. In case the bidder does not furnish the above details/suppresses the actual facts/produces false facts, along with the Technical bid, the technical bid of such bidder shall be considered for rejection. None 1726663081000 0 None None ELIGIBILITY With regard to tenders where lesser rates are quoted by the tenderer as per Standard Tender Document the contractor along with his financial bid shall furnish a detailed rate analysis for such of the items where has quoted lesser rates than the estimated rates. The rate analysis must indicated break up of rates for various components such as materials labour machinery and other relevant components He shall also explain & substantiate how such lesser quoted rates would work out for him from the point of view of doing quality work. He shall also give undertaking that the rates quoted by me are workable to execute quality wok as per specifications and to the full satisfaction of the department Any failure on the part of the contractor in not submitting the above said information along with his financial bid in E proc will be viewed seriously during evaluation of his financial bid None 1726663197000 0 None None ELIGIBILITY All the items of work as Maintained in the Bill of Quantity (BOQ) are including lead and lift charges loading and unloading charges labour charges all incidental charges hire charges of all machinery and equipment required for successful completion of work etc complete. The work shall be executed as per standard technical specification and directions of Engineer in charge of the work None 1726663255000 0 None None ELIGIBILITY The employer reserves the rights to inspect the work at any time and tenderer should follow the instructions to carryout the work if inspection party directs to rectify the work should be carried out with in 10 days otherwise work will be terminated for forfeiting the FSD. None 1726663269000 0 None None ELIGIBILITY Terms and Condition of Contractor as per Approved STD KW-4. None 1726663293000 0 None None ELIGIBILITY It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e Procurement on or before the last date and time of bid submission. None 1726663323000 2 None None ELIGIBILITY The quoted rates by the bidder shall be EXCLUDING GST & Applicable GST shall be paid seperately as per G.O FD417 EXP 12-2024 Dtd.09.08.2024 None
preQualCriterionList	None
technicalCriterionList	createdTs version createdDate modifiedDate description criterionCategoryText criterionTypeOthersValue tenderTechnicalCriterionDocumentList None None None None Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs) None None None None None None Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender) None None None None None None Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction) None None None None None None Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year None None None None None None Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year None None None None None None Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx) None None None None None None Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period) None None None None None None Total value of civl engineering works executed and payments received in the last five years (year-wise) None None None None None None List of existing commitments and ongoing works None None None None None None List of works for which tenders already submitted None None None None None None Banker Details for reference None None None None None None Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded None None None None None None Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years None None None None None None Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded None None None None None None List of Financial Resources with Certificates None None None None None None Satisfactorily completed (at least 90% of the contract value), as prime contractor, at least one similar work of value not less than Rs. 196.75 Lakhs (Usually not less than 50% estimated value of contract). Past Experience None createdTs version createdDate modifiedDate documentName None None None None Others -- Work done Certificate None None None None EARTHWORK 817.37 CUM Providing and laying PCC & RCC-788.34 Cum Providing TMT Steel-63.57 Tonnes Providing and laying Masonry-200.88 Cum Providing and laying Flooring/ Skirting/dadooing-1028.62 Sqm Providing Plastering-2727.19 Sqm Providing and laying Weather Proof Course-332.64 Sqm Providing All types of Painting-4355.02 Sqm Past Experience None createdTs version createdDate modifiedDate documentName None None None None Others -- AS PER BID DOCUMENT None None None None 3.2 (d) The tenderer or his identified sub contractor should possess required valid electrical license for executing building electrification works and should have executed similar electrical works totaling Rs.50.47 Lakh usually not less than 50% of the electrical works in any one year. Past Experience None createdTs version createdDate modifiedDate documentName None None None None Others -- Electical Workdone Certificate None None None None 3.3(a) Each Tenderer should further demonstrate Equipment capacity Each tenderer should further demonstrate a available by owning at least 50 percentage of the required specified key and critical equipment for this work and b the remaining 50 percentage can be deployed on ease hire basis for all works provided the relevant documents commitment agreements etc for availability for this work are furnished Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Equipment capacity None None None None AS per the bid document 3.6 Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- AS per the bid document 3.6 None None None None 3.2 (e) The Tenderer or his identified subcontractor should possess valid license for executing water supply/sanitary engineering works and should have executed similar water supply/sanitary engineering works totaling Rs.6.78 Lakhs (usually not less than 50% of the water supply/sanitary engineering works) in any one year. Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None 3.2(a) To qualify for award of this contract, each Tenderer in his name should have in the last five years ie 2019 20 to 2023 24(a) achieved in at least two financial years a minimum annual financial turnover (in all classes of civil Engineering construction works only) of Rs.787.00 Lakh. usually not less than the estimated cost under this contract for works costing more than Rs.100 lakh Financial Status None createdTs version createdDate modifiedDate documentName None None None None Audited CA Certificate of Annual Turnover None None None None Liquid assets and or availability of credit facilities of not less than Rs. 107.26 Lakh Credit lines letter of credit certificates from banks for meeting the fund requirement etc As per the prescribed format in clause 1 10 of SECTION 3 QUALIFICATION INFORMATION of this document Financial Status None createdTs version createdDate modifiedDate documentName None None None None Others -- Liquid assets
tenderCriterionDocumentList	documentName optional documentTypeText KPWD Class II and above Registration Certificate True Technical Bid Annual Turnover Certificate UDIN Number must be compulsory True Technical Bid 3.2aDocument related to 3.2 in bid document True Technical Bid 3.2b Document related to 3.2 in bid document True Technical Bid 3.2c Document related to 3.2 in bid document True Technical Bid 3.2d Document related to 3.2 in bid document True Technical Bid 3.3Document related to 3.3 in bid document True Technical Bid 3.3b Document related to 3.3b in bid document True Technical Bid 3.6Document related to 3.6 in bid document True Technical Bid 3.2e Document related to 3.2 in bid document. True Technical Bid
tenderWorkLocationList
tenderAddress	createdTs 1727421713000 version 0 createdDate None modifiedDate None blockNumber NO 2 BUILDING DIVISION KR CIRCLE BANGALORE street None city BANGALORE state Karnataka pin 540001
tenderRecallDTO	None