createdTs	None
version	None
createdDate	None
modifiedDate	None
noticeInvitingTenderDTO	createdTs 1727434593492 version 2 createdDate None modifiedDate None tenderType RFQ evaluationType TWO_COVER evaluationTypeText Two Cover invitingStrategy OPEN invitingStrategyText Open taxType INCLUSIVE_TAX tenderFee 5000.00 emd 679397.00 bidValueType ITEM_WISE bidValueTypeText Item wise tenderReceiptClose 07-10-2024 16:00:00 tenderQueryClose 02-10-2024 11:30:00 technicalBidOpen 08-10-2024 16:30:00 publishedDate 27-09-2024 16:52:49 publishedByPost DYES_DYDIR_ADMN_COMOFF_BNG publishedByUser KPE22835 - M C RAMESH bidValidityPeriod 90 noOfCalls 1 preBidMeetingDate 01-10-2024 15:30:00 preBidMeetingYn True preQualificationBidOpen None denominationType RUPEES denominationTypeText Rupees retenderedYn None percentageRateTypeText None contactPerson JAYAPRAKASH AEE splitEmdRequiredYn False emdBankGuarantee None emdCash None bgValidityPeriod None hideWeightage None multipleCurrencySelectionAllowedYn False isTechWeightageAllowed None highestBidderSelection False isVariableEmdAllowed None qcbsTenderYn None itemwiseEmdRequiredYn None sampleSubmissionDate None officeNumber None mobileNumber 9844454633 tenderSupplierList None
tenderSchedule	createdTs 1727434593514 version 4 createdDate None modifiedDate None tenderNumber DYES/2024-25/OW/WORK_INDENT18 title Construction of swimming pool at Kolar description Construction of swimming pool at Kolar category WORKS categoryText Works ecv 45292916.38 deptName Department Of Youth Empowerment And Sports status PUBLISHED statusText Published remarks None csrValue None ecvtenderYn False location 6065 locationName Department of Youth Empowerment and Sports Bengaluru Commissioner office provisionalAmount 53900000.0 groupOverheadTotal None fileNumber DYES/ES/AP/103/2024-25
tenderSubEstimateList	createdTs version createdDate modifiedDate workCategoryName subEstimateName estimateTotal itemList 1727434594000 0 None None Other Works Construction of swimming pool at Kolar 45292916.38 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 4095293 159490 None ITEM1 Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, including removal and disposal of top organic soil not exceeding 150 mm in thickness. 100 Sqm 1155.66 1155.66 17.63 False None None False None False 20374.2858 0 4095294 159490 None ITEM2 Earth work excavation for Foundation by mechanical means for all works and depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting and stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery and other appurtenaces required to complete the work Cum 105.06 105.06 528.9 False None None False None False 55566.234 0 4095295 159490 None ITEM3 Earth work excavation for Foundation by mechanical means for all works and depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting and stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery and other appurtenaces required to complete the work Depth exceeding 1.5 m, but not exceeding 3 m Cum 437.75 437.75 1545.29 False None None False None False 676450.6975 0 4095296 159490 None ITEM4 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m Cum 273.98 273.98 875.09 False None None False None False 239757.1582 0 4095297 159490 None ITEM5 Construction of Granular Sub-Base of required grading as per design mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 501 Grade-III Cum 2562.64 2562.64 108.94 False None None False None False 279174.0016 0 4095298 159490 None ITEM6 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead and lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement and formwork shall be paid separately) Cum 6168.67 6168.67 181.58 False None None False None False 1120107.0986 0 4095299 159490 None ITEM7 Providing and laying in Reinforced cement concrete for all Basement and surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead and lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement and formwork to be paid separately) Cum 7341.84 7341.84 248.31 False None None False None False 1823052.2904 0 4095300 159490 None ITEM8 Supplying, Fitting and Placing TMT Fe 500 and above Reinforcement in Foundation / Substructure /Superstructure complete as per Drawing and Technical Specifications. Tonne 92140.71 92140.71 24.831 False None None False None False 2287945.97001 0 4095301 159490 None ITEM9 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. Sqm 1267.93 1267.93 239.399 False None None False None False 303541.17407 0 4095302 159490 None ITEM10 Providing and laying water proofing treatment to the Retaining wall area with PU Elastomeric Single component liquid applied, cold applied, moisture cured high tensile elastomeric PU waterproofing membrane having elongation of more than 500percent and having solid content of above 90percent at 1.6kg per m2 in 2 coats to achieve final DFT (dry film thickness) of 1mm including prime coat of epoxy primer at150 g/ m2. The cost is inclusive of surface preparation, crack filling, repair of loose mortar etc. completely as per specification and with a 10 years warranty on product and work from certified manufacturers as per the direction of the Engineer In charge. Sqm 914.64 914.64 919.0 False None None False None False 840554.16 0 4095303 159490 None ITEM11 Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge Sqm 364.62 364.62 1003.8 False None None False None False 366005.556 0 4095304 159490 None ITEM12 Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08percent and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry at 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete Sqm 5487.84 5487.84 63.6 False None None False None False 349026.624 0 4095305 159490 None ITEM13 Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints finished with cement mortar 1:3 over existing cement concrete bed , including cost of materials, mortar, labour, curing complete as per specifications. Sqm 337.84 337.84 345.0 False None None False None False 116554.8 0 4095306 159490 None ITEM14 Providing edge moulding to 18mm thick Granite stone counters, vanities etc including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge. Sqm 1210.25 1210.25 473.2 False None None False None False 572690.3 0 4095307 159490 None ITEM15 Porcelain mosaic tiles of 48mm X 48mm X 6mm, thermal shock resistance, chemical resistance, sheet size 306mm X 306mm, using adhesive and epoxy grout including laying, Grouting, acid wash and cleaning complete tiles make : piccolo / Pixel / equivalent, Adhesive and epoxy make : Bal endura / latecrete / roff / equivalent Sqm 4150.0 4150.0 810.6 False None None False None False 3363990.0 0 4095308 159490 None ITEM16 Providing Water for testing, Dewatering and Pumping charges complete, (Market Rate) Ltr 0.1 0.1 901050.0 False None None False None False 90105.0 0 4095309 159490 None ITEM17 Earth work excavation for Foundation by mechanical means for all works and depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting and stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery and other appurtenaces required to complete the work Depth exceeding 1.5 m, but not exceeding 3 m Cum 437.75 437.75 893.29 False None None False None False 391037.6975 0 4095310 159490 None ITEM18 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m Cum 273.98 273.98 625.302 False None None False None False 171320.24196 0 4095311 159490 None ITEM19 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead and lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement and formwork shall be paid separately) Cum 6168.67 6168.67 75.71 False None None False None False 467030.0057 0 4095312 159490 None ITEM20 Providing and laying in position Reinforced cement concrete M25 for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead and lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement and formwork to be paid separately) Cum 7048.16 7048.16 141.14 False None None False None False 994777.3024 0 4095313 159490 None ITEM21 Providing and laying in Reinforced cement concrete for all Basement and surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead and lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement and formwork to be paid separately) Cum 8009.28 8009.28 47.44 False None None False None False 379960.2432 0 4095314 159490 None ITEM22 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead and lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars and formwork to be paid separately) Cum 7753.11 7753.11 35.91 False None None False None False 278414.1801 0 4095315 159490 None ITEM23 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead and lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars and formwork to be paid separately) Cum 8457.94 8457.94 106.35 False None None False None False 899501.919 0 4095316 159490 None ITEM24 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead and lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars and formwork to be paid separately) Cum 10220.02 10220.02 6.6299 False None None False None False 67757.710598 0 4095317 159490 None ITEM25 Supplying, Fitting and Placing TMT Fe 500 and above Reinforcement in Foundation / Substructure /Superstructure complete as per Drawing and Technical Specifications. Tonne 92140.71 92140.71 33.747 False None None False None False 3109472.54037 0 4095318 159490 None ITEM26 Providing Size Stone masonry with hard stone in foundation and plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 6580.67 6580.67 230.89 False None None False None False 1519410.8963 0 4095319 159490 None ITEM27 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. Sqm 1267.93 1267.93 1502.22 False None None False None False 1904709.8046 0 4095320 159490 None ITEM28 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. Sqm 1137.12 1137.12 136.4 False None None False None False 155103.168 0 4095321 159490 None ITEM29 Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge Sqm 364.62 364.62 3147.19 False None None False None False 1147528.4178 0 4095322 159490 None ITEM30 Finishing walls with 100percent Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali and fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied at 1.43 litre/ 10 m². Over and including priming coat of exterior primer applied at 0.90 litre/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge Sqm 200.85 200.85 3138.5 False None None False None False 630367.725 0 4095323 159490 None ITEM31 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge Sqm 103.0 103.0 2085.35 False None None False None False 214791.05 0 4095324 159490 None ITEM32 Providing and laying Polished Glazed Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08percent and conforming to IS:15622, of approved brand and manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). Sqm 1365.78 1365.78 174.4 False None None False None False 238192.032 0 4095325 159490 None ITEM33 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications Sqm 1492.47 1492.47 657.04 False None None False None False 980612.4888 0 4095326 159490 None ITEM34 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings / wooden frames with rawl plugs screws etc. Kgs 188.49 188.49 1878.75 False None None False None False 354125.5875 0 4095327 159490 None ITEM35 Providing and fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top and bottom rails, covered with heat moulded Prelaminated PVC C Channel of 5mm thick sheet and 30x50mm wide to form stiles and 5mm thick and 75mm wide Prelaminated PVC Sheets for top rail, lock rail and bottom rail on either side and 5mm thick, 20mm wide cross PVC sheet as gap insert for top rail and bottom rail, Panelling of 5mm thick PVC sheet Prelaminated on either side fitted in the M.S. frame, Sealed to the stiles and rails with PVC Designer beading on either side and joined together with solvent cement adhesive etc., Complete as per manufacturers specification and direction of Engineer-in-charge fixed to frames with 3 nos of 75mm Aluminium hinges Sqm 2436.98 2436.98 11.34 False None None False None False 27635.3532 0 4095328 159490 None ITEM36 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge Sqm 172.01 172.01 458.12 False None None False None False 78801.2212 0 4095329 159490 None ITEM37 Providing and fixing of 2.5 track x 2panel sliding windows made out of multi chambered UPVC(Matching to RAL9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets grey colour having isolated drainage and reinforced with Galvanized Iron profile throughout the window frame. The outer frame having an overall size of 81mm width x 42mmheight with reinforcement of 1mm thickness and Sash with overall size of 31mm x 57mm and mesh sash of size with GI reinforcement of 1.5mm thickness. Coextruded Glazing bead for fixing of glass shall be of size 21.5mm x 9.5mm. Windows shall be provided with 5mm plain float glass, standard hardwareand single point locking system with touch lock. Wall thickness of frame and sash shall be of 1.8 to 2.0mm. Maximum possible size 1519mm x 1519mm (The cost is inclusive of all fixtures and separate charges for minor TandPs shall not be made) Sqm 6747.53 6747.53 78.03 False None None False None False 526509.7659 0 4095330 159490 None ITEM38 Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance+/-1mm), with wall thickness 2.0 mm ( +/-0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (+/-0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer’s specification and direction of Engineerincharge Sqm 246.17 246.17 110.0 False None None False None False 27078.7 0 4095331 159490 None ITEM39 Providingand fixing of Openable door made out of multi chambered UPVC(Matching to RAL9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPV(Thermo Plastic Vulcanized) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the openable frame. The frame having overall size of 60mm x 55mm with GI reinforcement of 1mm thickness and openable sash with overall size of 60mm x 102mm and GI reinforcement of 2mm thickness. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 34 mm. Windows shall be provided with 6mm plain float glass, Standard hardware with 2D/3D hinge and Multi point locking system with Handle. Wall thickness of frame and sash shall be of 2mm to 2.5mm. Maximum possible size 900mm x 2400mm. (The cost is inclusive of all fixtures and separate charges for minor TandP's shall not be made) Sqm 6432.35 6432.35 35.12 False None None False None False 225904.132 0 4095332 159490 None ITEM40 Providing and fixing precoated galvanised steel sheet trussless roofing on curved surface fixed with polymer coated bolts and nuts including a coat of approved steel primer and two coats of approved paint on bolts, including cutting to size and shape wherever required as per the direction of Engineer in charge Sqm 3240.0 3240.0 1852.0 False None None False None False 6000480.0 0 4095333 159490 None ITEM41 Providing and fixing in position 6mm clear acrilic sheet/ 6mm thick tougened plain glass for covering work over a frame work of painted MS box section of size 50mmx50mmx3mm including all necessary hardwares, fabrication and providing and removing , scaffolding, red oxide and two coats paint of approved make, including fixing of aluminium beading on MS frame (50x2mm thick) with all necessary screws and fittings etc,. complete as per approved drawing and specification and as directed by engineer in charge. Sqm 7896.0 7896.0 54.31 False None None False None False 428831.76 0 4095334 159490 None ITEM42 Providing and fixing in position aluminium loures for covering work over spaces with powder coated frame work of painted MS box section of size 50mmx50mmx3mm including all necessary hardwares, fabrication and providing and removing , scaffolding, red oxide and two coats paint of approved make, including fixing of aluminium beading on MS frame (50x2mm thick) with all necessary screws and fittings etc,. complete as per approved drawing and specification and as directed by engineer in charge. Rate inclusive material, labour, lead, lift,tools andplants etc,. complete. Sqm 9312.0 9312.0 23.27 False None None False None False 216690.24 0 4095335 159490 None ITEM43 FILTERTANK :- Supply of Imported fiber glass pressure sand filter AQUALUX make tank of dia 1600mm fitted with pressure guage , manual air bleeder, water drain and Emptying Plug fitted with collector homs and diffuser made unplasticized PVC and Polypropylene Filter flow rate- 76 Cum per hour Maximum working pressure 2.5-3.5 kg per CM2 . Supply of 5 valve Battery with connection to the filter with accessories etc., complete. Including PVC Solvent, Teflon Tape and others, inclusive all Taxes HOM of Machinaries , Fabrications , Labour charges etc complete as per additional Technical, Bid Document special specifications enclosed for the succssful completion of the work and as per the directions of the Engineer in charge of work. Complete as per specifications and as directed by the Engineer incharge of work.[Total volume of water 7,84,050 turn over rate 5.15 hours] (Data rate approved by Supintending Engineer, PW,PandIWTD Dharwad Circle, Dharwad vide letter No. 343 Dtd: 21-4-2012) Nos 755370.0 755370.0 2.0 False None None False None False 1510740.0 0 4095336 159490 None ITEM44 Supply of Filter Media Kgs 31.0 31.0 6400.0 False None None False None False 198400.0 0 4095337 159490 None ITEM45 Centrifugal Cast Iron Pumps, Mechanical Seal in Stainless Steel. I.P.-54 motor protection. Stainless steel AISI -420 shaft. With in built strainer basket. Conn. PN-16 according to DIN2501. Flowrate : 76m3/h. 7.5 HP Voltage 400V/ 3 ph. (2 working and 2 standby) Make: Aqualux / Equivalent Nos 183040.0 183040.0 4.0 False None None False None False 732160.0 0 4095338 159490 None ITEM46 BUTTERFLY VALVES AND FLANGES:- PVC Butterfly Valves and NRV of 110mm with PVC flange Adapter, with nuts and bolts Make: Supreme / Cepex / Equivalent Nos 21615.0 21615.0 20.0 False None None False None False 432300.0 0 4095339 159490 None ITEM47 STAINLESS STEEL MAIN DRAIN:- Made out of Stainless Steel sheet ( 16 guage x 304 guage with Stainless Steel circles and and Stainless steel bolts etc complete including fixing fabricating Turning cutting, rolling, Grainding, Drilling , Buffing etc including transporation , lifting and Unloading inclusive all Taxes HOM of Machinaries , Fabrications , Labour charges etc complete as per additional Technical, Bid Document special specifications enclosed for the succssful completion of the work and as per the directions of the Engineer in charge of work. Main Pool 450mm X 450mm Nos 43366.0 43366.0 2.0 False None None False None False 86732.0 0 4095340 159490 None ITEM48 STAINLESS STEEL MAIN DRAIN:- Made out of Stainless Steel sheet ( 16 guage x 304 guage with Stainless Steel circles and and Stainless steel bolts etc complete including fixing fabricating Turning cutting, rolling, Grainding, Drilling , Buffing etc including transporation , lifting and Unloading inclusive all Taxes HOM of Machinaries , Fabrications , Labour charges etc complete as per additional Technical, Bid Document special specifications enclosed for the succssful completion of the work and as per the directions of the Engineer in charge of work. Kids pool 350mm X 350mm Nos 35941.0 35941.0 1.0 False None None False None False 35941.0 0 4095341 159490 None ITEM49 FLOOR INLETS:- Providing , Supplying and fixing of Imprted floor Inlet made of ABS Plastic Multiflow and external thread (AQUALUX make) including transporation , lifting and Unloading inclusive all Taxes HOM of Machinaries , Fabrications , Labour charges etc complete as per additional Technical, Bid Document special specifications enclosed for the succssful completion of the work and as per the directions of the Engineer in charge of work. (Data rate approved by Supintending Engineer, PW,PandIWTD Dharwad Circle, Dharwad vide letter No. 343 Dtd: 21-4-2012) Nos 2068.0 2068.0 31.0 False None None False None False 64108.0 0 4095342 159490 None ITEM50 S.S. LADDERS FOR 2 STEPS :- Providing Supplying and fixing Stainless Steel ladder OF Standard Design ( 304G) for 3 steps ( SS Pipe of 1 .5inch dia x 16guage x 19 dia x 16 guage S.S Sheet of 16 G. S.S Circles , Nylon Flanges S.S Bolts etc including Fabrication labour charges for Cutting, Bending , Embosing and buffing including transporation , lifting and Unloading inclusive all Taxes HOM of Machinaries , Fabrications , Labour charges etc complete as per additional Technical, Bid Document special specifications enclosed for the succssful completion of the work and as per the directions of the Engineer in charge of work. Nos 28435.0 28435.0 2.0 False None None False None False 56870.0 0 4095343 159490 None ITEM51 S.S. LADDERS FOR 3 STEPS :- Providing Supplying and fixing Stainless Steel ladder OF Standard Design ( 304G) for 3 steps ( SS Pipe of 1 .5inch dia x 16guage x 19 dia x 16 guage S.S Sheet of 16 G. S.S Circles , Nylon Flanges S.S Bolts etc including Fabrication labour charges for Cutting, Bending , Embosing and buffing including transporation , lifting and Unloading inclusive all Taxes HOM of Machinaries , Fabrications , Labour charges etc complete as per additional Technical, Bid Document special specifications enclosed for the succssful completion of the work and as per the directions of the Engineer in charge of work. Nos 32560.0 32560.0 2.0 False None None False None False 65120.0 0 4095344 159490 None ITEM52 S.S. LADDERS FOR 5 STEPS :- Providing Supplying and fixing Stainless Steel ladder OF Standard Design ( 304G) for 5 steps ( SS Pipe of 1 .5inch dia x 16guage x 19 dia x 16 guage S.S Sheet of 16 G. S.S Circles , Nylon Flanges S.S Bolts etc including Fabrication labour charges for Cutting, Bending , Embosing and buffing including transporation , lifting and Unloading inclusive all Taxes HOM of Machinaries , Fabrications , Labour charges etc complete as per additional Technical, Bid Document special specifications enclosed for the succssful completion of the work and as per the directions of the Engineer in charge of work. Nos 40095.0 40095.0 2.0 False None None False None False 80190.0 0 4095345 159490 None ITEM53 TROLLEY SUCTION SWEEPER:- Providing supplying and fixing Trolly Suction Sweeper fabrication of M.S Trolly , with Supply of 2 HP Self priming Pump ( Kirloskar / equivalent make) with prefilter with Starter ( Land T or Eqauivalent) including Fabrication of Stainless steel Suction head fixed with Scrubbing brushes including supply of PVC Flexible Suction hose 30 Mtr Length and Towing rope including transporation , lifting and Unloading, Fabrications , Labour charges etc complete as per additional Technical, Bid Document special specifications enclosed for the succssful completion of the work and as per the directions of the Engineer in charge of work. Set 152515.0 152515.0 1.0 False None None False None False 152515.0 0 4095346 159490 None ITEM54 LEAF RAKE:- Providing Supplying of Lead Rake made out of alluminium pipe of Standard make and Deep bag net in Nylon including transporation , lifting and Unloading inclusive all Taxes HOM of Machinaries , Fabrications , Labour charges etc complete as per additional Technical, Bid Document special specifications enclosed for the succssful completion of the work and as per the directions of the Engineer in charge of work. (Data rate approved by Supintending Engineer, PW,PandIWTD Dharwad Circle, Dharwad vide letter No. 343 Dtd: 21-4-2012) Nos 4130.0 4130.0 1.0 False None None False None False 4130.0 0 4095347 159490 None ITEM55 TEST KIT :- Providing supplying Test Kit to check free Chlorine and PH of the Swimming pool water including transporation , lifting and Unloading inclusive all Taxes HOM of Machinaries , Fabrications , Labour charges etc complete as per additional Technical, Bid Document special specifications enclosed for the succssful completion of the work and as per the directions of the Engineer in charge of work. Nos 3630.0 3630.0 1.0 False None None False None False 3630.0 0 4095348 159490 None ITEM56 Chemical for Start up :- Providing Supplying of Trichloroisocyanuric acid (TCCA90) including transporation , lifting and Unloading inclusive all Taxes complete as per additional Technical, Bid Document special specifications enclosed for the succssful completion of the work and as per the directions of the Engineer in charge of work. Kgs 855.0 855.0 200.0 False None None False None False 171000.0 0 4095349 159490 None ITEM57 POOL BRUSH ( FOR WALL and FLOOR):- Providing Supplying of Pool brush ( for wall and Floor ) of Stainless Steel body with Nylon Bristle including transporation , lifting and Unloading inclusive all Taxes HOM of Machinaries , Fabrications , Labour charges etc complete as per additional Technical, Bid Document special specifications enclosed for the succssful completion of the work and as per the directions of the Engineer in charge of work. Nos 2750.0 2750.0 2.0 False None None False None False 5500.0 0 4095350 159490 None ITEM58 P.P GRATINGS ( MILKY WHITE):- Supplying and fixing PP Gratings ( Milky white) over flow gutter gratings made of Polyprolene materials of standard size and diamentions used for swimming pools including transporation , lifting and Unloading inclusive all Taxes HOM of Machinaries , Fabrications , Labour charges etc complete as per additional Technical, Bid Document special specifications enclosed for the succssful completion of the work and as per the directions of the Engineer in charge of work. m 2552.0 2552.0 84.0 False None None False None False 214368.0 0 4095351 159490 None ITEM59 SS HAND RAIL:- Providing fixing errecting fabricating S.S Handrails of 1 1/2 inch dia x 16 guage x 304 g. pipe using SS Circles and fixed to the swimming pool wall with S.S Achoring bolts for 1 Rft including transporation , lifting and Unloading inclusive all Taxes HOM of Machinaries , Fabrications , Labour charges etc complete as per additional Technical, Bid Document special specifications enclosed for the succssful completion of the work and as per the directions of the Engineer in charge of work. m 2985.0 2985.0 50.0 False None None False None False 149250.0 0 4095352 159490 None ITEM60 SS RINGS FOR LANE SEPARATOR:- Providing Supplying SS. Rings for Lane separator fabricated in 4inch dia x 16 G x 304 G Pipe with S.S Rod including transporation , lifting and Unloading inclusive all Taxes HOM of Machinaries , Fabrications , Labour charges etc complete as per additional Technical, Bid Document special specifications enclosed for the succssful completion of the work and as per the directions of the Engineer in charge of work. Nos 3355.0 3355.0 18.0 False None None False None False 60390.0 0 4095353 159490 None ITEM61 PLUMBING - All allied fixtures and fittings Complete for complete working of the swimming pool. All items to be of IS standard and reputed make. Unit 231000.0 231000.0 1.0 False None None False None False 231000.0 0 4095354 159490 None ITEM62 Line separator(Float lane) m 2255.0 2255.0 225.0 False None None False None False 507375.0 0 4095355 159490 None ITEM63 Starting block for swimming pool [improved Stainless steel with fiber] Nos 194650.0 194650.0 8.0 False None None False None False 1557200.0 0 4095356 159490 None ITEM64 INSTALLATION :- Installation of all the equipments for the purpose of functioning of swimming pool with necessary staff men material labours, including transportation, lifting and unloading inclusive all taxes HOM of machineries, fabrications, labour charges etc., complete as per additional technical Bid document special specification enclosed for the successful completion of the work and as per the directions for the Engineering in charge of the work Nos 120000.0 120000.0 2.0 False None None False None False 240000.0 0 4095357 159490 None ITEM65 Providing and installing at site of work PVC pipes of 10kg/sqcm including cost of pipes and fittings like elbow, bend, collar, tee etc. and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak proof including jointing of approved type with all labour charges and all lift charges, all conveyance charges, handling charges etc. complete 63mm dia pipe m 450.0 450.0 30.0 False None None False None False 13500.0 0 4095358 159490 None ITEM66 Providing and installing at site of work PVC pipes of 10kg/sqcm including cost of pipes and fittings like elbow, bend, collar, tee etc. and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak proof including jointing of approved type with all labour charges and all lift charges, all conveyance charges, handling charges etc. complete 75mm dia pipe m 740.0 740.0 40.0 False None None False None False 29600.0 0 4095359 159490 None ITEM67 Providing and installing at site of work PVC pipes of 10kg/sqcm including cost of pipes and fittings like elbow, bend, collar, tee etc. and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak proof including jointing of approved type with all labour charges and all lift charges, all conveyance charges, handling charges etc. complete 90mm dia pipe m 1100.0 1100.0 160.0 False None None False None False 176000.0 0 4095360 159490 None ITEM68 Providing and installing at site of work PVC pipes of 10kg/sqcm including cost of pipes and fittings like elbow, bend, collar, tee etc. and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak proof including jointing of approved type with all labour charges and all lift charges, all conveyance charges, handling charges etc. complete 110mm dia pipe m 1260.0 1260.0 285.0 False None None False None False 359100.0 0 4095361 159490 None ITEM69 Providing and installing at site of work PVC pipes of 10kg/sqcm including cost of pipes and fittings like elbow, bend, collar, tee etc. and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak proof including jointing of approved type with all labour charges and all lift charges, all conveyance charges, handling charges etc. complete 140mm dia pipe m 1620.0 1620.0 20.0 False None None False None False 32400.0 0 4095362 159490 None ITEM70 Providing and installing at site of work PVC pipes of 10kg/sqcm including cost of pipes and fittings like elbow, bend, collar, tee etc. and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak proof including jointing of approved type with all labour charges and all lift charges, all conveyance charges, handling charges etc. complete 200mm dia pipe m 2060.0 2060.0 83.0 False None None False None False 170980.0 0 4095363 159490 None ITEM71 Commissioning the pool and traning for 1 week about pool maintenance Nos 58000.0 58000.0 2.0 False None None False None False 116000.0 0 4095364 159490 None ITEM72 Control panel board which includes Fabricated MS Powder coated box, with the fixtures like MCB, ammeter, volt meter, etc. complete Nos 70000.0 70000.0 1.0 False None None False None False 70000.0 0 4095365 159490 None ITEM73 1.1 kV,XLPE or Heat resistant PVC insulated, PVC exutruted Inner sheathed armoured LYUG cable as per IS -1554(Part 1 )or IS 7098 Part-1, Armouring strip thickeness and resistivity as per IS-3975. 50 sqmm 4 core (17 GI strips -4x0.8mm) (Sl.No.208, Item No.32.12, Page No.13, ESCOMs SR 2 2023-2024). Km 207194.0 207194.0 0.22 False None None False None False 45582.68 0 4095366 159490 None ITEM74 Epoxy Terminating kit (Pot head) suitable for 1.1kV, LT UG Cable.(Sl.No.249, Item No.35.01, Page No.15, ESCOMs SR 2 2023-2024). Set 324.0 324.0 1.0 False None None False None False 324.0 0 4095367 159490 None ITEM75 Laying of cable in existing trench/ GI pipe/ Stone ware/ RCC Hume pipe using wooden/ Aluminium rollers as directed by the department staff. LT Cable. 35 to 95Sqmm. (Sl.No.175, Item No.21.06, Page No.52, ESCOMs SR 2 2023-2024). Km 31139.0 31139.0 0.22 False None None False None False 6850.58 0 4095368 159490 None ITEM76 Earth work excavation by manual means for drains waste weir, draft approach channels, key trenches foundation of building and bridge and such canals and similar works in all kinds of soils , as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, re- moval of stumps and other deleterious matter, excavated surface lev- eled and sides neatly dressed disposing off the excavated stuff or sort- ing and stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools and other appurtenaces required to complete the work In all kinds of soils Depth upto 1.5 m P.NO.5 I.NO.1.4.1 VOL-1 CSR 2023-24 Cum 266.2 266.2 200.0 False None None False None False 53240.0 0 4095369 159490 None ITEM77 Supplying heavy gauge PVC conduit pipe 25 mm dia 2 mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary. (Sl.No.1., Item No.1.2.2, Page No.2 , PWD Ele SR 2 2023-2024). m 78.0 78.0 400.0 False None None False None False 31200.0 0 4095370 159490 None ITEM78 Supplying heavy gauge PVC conduit pipe 19/20 mm dia 2 mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted wood plugs in case of RCC ceiling and RCC wall/ stone structure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws. (Sl.No.1, Item No.1.1.1, Page No.2 , PWD Ele SR 2 2023-2024). m 69.0 69.0 800.0 False None None False None False 55200.0 0 4095371 159490 None ITEM79 Supplying and fixing sheet Metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc.200 x 200 x 65 mm. (Sl.No.1., Item No.1.4.7, Page No.2 , PWD Ele SR 2 2023-2024). Each 348.0 348.0 2.0 False None None False None False 696.0 0 4095372 159490 None ITEM80 Supplying and fixing PVC/metal conduit Deep junction box. (Sl.No.1., Item No.1.5.2, Page No.2 , PWD Ele SR 2 2023-2024). Each 56.0 56.0 2.0 False None None False None False 112.0 0 4095373 159490 None ITEM81 Supplying And Fixing Metal Fan Box with Round Hook.(Sl.No.1, Item No.1.13, Page No.4 , PWD Ele SR 2 2023-2024). No 117.0 117.0 15.0 False None None False None False 1755.0 0 4095374 159490 None ITEM82 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5mm2 (Phase and Neutral) and 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Short Point upto 3 mtrs from tapping point to outlet via switch box. (Sl.No.2., Item No.2.2.1, Page No.5 , PWD Ele SR 2 2023-2024). Point 269.0 269.0 18.0 False None None False None False 4842.0 0 4095375 159490 None ITEM83 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5mm2 (Phase and Neutral) and 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Medium point above 3m upto 6m from tapping point to out let via switch box. (Sl.No.2, Item No.2.2.2, Page No.5 , PWD Ele SR 2 2023-2024). Point 379.0 379.0 28.0 False None None False None False 10612.0 0 4095376 159490 None ITEM84 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5mm2 (Phase and Neutral) and 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Long point above 6m upto 10m from tapping point to out let via switch box. (Sl.No.2, Item No.2.2.3, Page No.5, PWD Ele SR 2 2023-2024). Point 555.0 555.0 60.0 False None None False None False 33300.0 0 4095377 159490 None ITEM85 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 1.5 mm2. (Sl.No.2, Item No.2.3.2, Page No5 , PWD Ele SR 2 2023-2024). m 26.0 26.0 2150.0 False None None False None False 55900.0 0 4095378 159490 None ITEM86 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 2.5 mm2. (Sl.No.2, Item No.2.3.3, Page No5, PWD Ele SR 2 2023-2024). m 42.0 42.0 1600.0 False None None False None False 67200.0 0 4095379 159490 None ITEM87 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 4mm2. (Sl.No.2, Item No.2.3.4, Page No5, PWD Ele SR 2 2023-2024). m 63.0 63.0 1200.0 False None None False None False 75600.0 0 4095380 159490 None ITEM88 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 6mm2. (Sl.No.2, Item No.2.3.5, Page No5, PWD Ele SR 2 2023-2024). m 92.0 92.0 400.0 False None None False None False 36800.0 0 4095381 159490 None ITEM89 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 10mm2. (Sl.No.2, Item No.2.3.6, Page No. 6, PWD Ele SR 2 2023-2024). m 167.0 167.0 500.0 False None None False None False 83500.0 0 4095382 159490 None ITEM90 Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for working voltage upto 1100V as per IS- 694:2010. 3cx2.5sqmm (Sl.No.2, Item No.2.5.8, Page No6, PWD Ele SR 2 2023-2024). m 113.0 113.0 500.0 False None None False None False 56500.0 0 4095383 159490 None ITEM91 Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for working voltage upto 1100V as per IS- 694:2010. 3cx 4sqmm (Sl.No.2, Item No.2.5.15, Page No6, PWD Ele SR 2 2023-2024). m 172.0 172.0 400.0 False None None False None False 68800.0 0 4095384 159490 None ITEM92 Supplying, Wiring and Fixing Earth electrode for Grounding conduits,I.C.cutouts and other equipments on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr. Long buried in a pit..The pit should be filled with equal proportion of salt and charcoal 150mm alround the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI wire of size asper ISI specification 7.3.3 of IS 732 using 12mm dia bolts,nuts,washers and checknuts etc, the pipe shall have 16 through holes of 12mm dia.(Sl.No.12, Item No.12.57, Page No.54, PWD Ele SR 2 2023-2024). No 3510.0 3510.0 5.0 False None None False None False 17550.0 0 4095385 159490 None ITEM93 Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/NF screws etc., complete. 4-5 Way. (Sl.No.3, Item No.3.3.3, Page No.8, PWD Ele SR 2 2023-2024). Each 137.0 137.0 8.0 False None None False None False 1096.0 0 4095386 159490 None ITEM94 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. 4-5 Way. (Sl.No.3, Item No.3.4.3, Page No.8, PWD Ele SR 2 2023-2024). Each 177.0 177.0 8.0 False None None False None False 1416.0 0 4095387 159490 None ITEM95 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 4Module. (Sl.No.3, Item No.3.5.3, Page No.8, PWD Ele SR 2 2023-2024). Each 175.0 175.0 8.0 False None None False None False 1400.0 0 4095388 159490 None ITEM96 Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/NF screws etc., complete. 8 Way. (Sl.No.3, Item No.3.3.5, Page No.8, PWD Ele SR 2 2023-2024). Each 219.0 219.0 7.0 False None None False None False 1533.0 0 4095389 159490 None ITEM97 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. 8 Way. (Sl.No.3, Item No.3.4.5, Page No.8, PWD Ele SR 2 2023-2024). Each 261.0 261.0 7.0 False None None False None False 1827.0 0 4095390 159490 None ITEM98 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 8 Module. (Sl.No.3, Item No.3.5.5, Page No.8, PWD Ele SR 2 2023-2024). Each 284.0 284.0 7.0 False None None False None False 1988.0 0 4095391 159490 None ITEM99 Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/NF screws etc., complete. 10-12Way. (Sl.No.3, Item No.3.3.6, Page No.8, PWD Ele SR 2 2023-2024). Each 261.0 261.0 4.0 False None None False None False 1044.0 0 4095392 159490 None ITEM100 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. 10-12Way. (Sl.No.3, Item No.3.4.6, Page No.8, PWD Ele SR 2 2023-2024). Each 319.0 319.0 4.0 False None None False None False 1276.0 0 4095393 159490 None ITEM101 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 10-12 Module. (Sl.No.3, Item No.3.5.6, Page No.8, PWD Ele SR 2 2023-2024). Each 344.0 344.0 4.0 False None None False None False 1376.0 0 4095394 159490 None ITEM102 Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/NF screws etc., complete. 16 Way. (Sl.No.3, Item No.3.3.7, Page No.8, PWD Ele SR 2 2023-2024). Each 294.0 294.0 4.0 False None None False None False 1176.0 0 4095395 159490 None ITEM103 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. 16Way. (Sl.No.3, Item No.3.4.7, Page No.8, PWD Ele SR 2 2023-2024). Each 363.0 363.0 4.0 False None None False None False 1452.0 0 4095396 159490 None ITEM104 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 16 Module. (Sl.No.3, Item No.3.5.7, Page No.8, PWD Ele SR 2 2023-2024). Each 397.0 397.0 4.0 False None None False None False 1588.0 0 4095397 159490 None ITEM105 Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/NF screws etc., complete. 18 Way. (Sl.No.3, Item No.3.3.8, Page No.8, PWD Ele SR 2 2023-2024). Each 339.0 339.0 3.0 False None None False None False 1017.0 0 4095398 159490 None ITEM106 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. 18Way. (Sl.No.3, Item No.3.4.8, Page No.8, PWD Ele SR 2 2023-2024). Each 405.0 405.0 3.0 False None None False None False 1215.0 0 4095399 159490 None ITEM107 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 18 Module. (Sl.No.3, Item No.3.5.8, Page No.8, PWD Ele SR 2 2023-2024). Each 457.0 457.0 3.0 False None None False None False 1371.0 0 4095400 159490 None ITEM108 Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A One way Switch. (Sl.No.3, Item No.3.6.1, Page No.9, PWD Ele SR 2 2023-2024). Each 102.0 102.0 130.0 False None None False None False 13260.0 0 4095401 159490 None ITEM109 Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A Three way Socket. (Sl.No.3, Item No.3.6.3, Page No.9, PWD Ele SR 2 2023-2024). Each 171.0 171.0 15.0 False None None False None False 2565.0 0 4095402 159490 None ITEM110 Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293.Stepped Fan Regulator Two Module. (Sl.No.3, Item No.3.6.4, Page No.9, PWD Ele SR 2 2023-2024). Each 357.0 357.0 15.0 False None None False None False 5355.0 0 4095403 159490 None ITEM111 Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293.16A One way Switch.(Sl.No.3, Item No.3.6.7, Page No.9, PWD Ele SR 2 2023-2024). Each 180.0 180.0 8.0 False None None False None False 1440.0 0 4095404 159490 None ITEM112 Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293.32A DP switch.(Sl.No.3, Item No.3.6.9, Page No.9, PWD Ele SR 2 2023-2024). Each 326.0 326.0 12.0 False None None False None False 3912.0 0 4095405 159490 None ITEM113 Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6/16A Universal Socket.(Sl.No.3, Item No.3.6.10, Page No.9, PWD Ele SR 2 2023-2024). Each 236.0 236.0 8.0 False None None False None False 1888.0 0 4095406 159490 None ITEM114 Supplying and fixing of metal clad industrial plugs and sockets.3pole+earth 440V PLUG (Sl.No.3, Item No.3.13.4, Page No.9, PWD Ele SR 2 2023-2024). Each 609.86 609.86 4.0 False None None False None False 2439.44 0 4095407 159490 None ITEM115 Supplying and fixing of metal clad industrial plugs and sockets.3pole+earth 440V SOCKET (Sl.No.3, Item No.3.13.8, Page No.9, PWD Ele SR 2 2023-2024). Each 827.82 827.82 4.0 False None None False None False 3311.28 0 4095408 159490 None ITEM116 Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board. 6A Bakelite Ceiling Rose.(Sl.No.3, Item No.3.14.5, Page No.9, PWD Ele SR 2 2023-2024). Each 78.0 78.0 150.0 False None None False None False 11700.0 0 4095409 159490 None ITEM117 Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board. 6A Batten Holder.(Sl.No.3, Item No.3.14.7, Page No.9, PWD Ele SR 2 2023-2024). Each 74.0 74.0 50.0 False None None False None False 3700.0 0 4095410 159490 None ITEM118 Supply and fixing polished wood board made of not less than 15mm thick plank on both sides of not more than 2 pieces and fixing the same to the wall using tapered inverted wooden plugs screws. 20inch x 20inch x 2.5inch(Sl.No.5, Item No.5.6.6, Page No.14, PWD Ele SR 2 2023-2024). Each 326.13 326.13 1.0 False None None False None False 326.13 0 4095411 159490 None ITEM119 Supplying and fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers.63A(Sl.No.5, Item No.5.7.3, Page No.14, PWD Ele SR 2 2023-2024). Each 401.0 401.0 3.0 False None None False None False 1203.0 0 4095412 159490 None ITEM120 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 40 A DP (Sl.No.5, Item No.5.18.5, Page No.17, PWD Ele SR 2 2023-2024). Each 1060.0 1060.0 6.0 False None None False None False 6360.0 0 4095413 159490 None ITEM121 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 50-63 A TPN.(Sl.No.5, Item No.5.18.9, Page No.18, PWD Ele SR 2 2023-2024). Each 3088.0 3088.0 4.0 False None None False None False 12352.0 0 4095414 159490 None ITEM122 Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clA, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS enclosure.II - Double Door. 4 Way SP and N. (Sl.No.5, Item No.5.19.6, Page No.18, PWD Ele SR 2 2023-2024). Each 1524.0 1524.0 4.0 False None None False None False 6096.0 0 4095415 159490 None ITEM123 Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clA, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS enclosure.II - Double Door. 8 Way SP and N. (Sl.No.5, Item No.5.19.6, Page No.18, PWD Ele SR 2 2023-2024). Each 1854.0 1854.0 1.0 False None None False None False 1854.0 0 4095416 159490 None ITEM124 Supplying, fixing and wiring rotary selector switch suitable for Ammeter. (Sl.No.5, Item No.5.27, Page No.19, PWD Ele SR 2 2023-2024). Each 200.0 200.0 1.0 False None None False None False 200.0 0 4095417 159490 None ITEM125 Supplying, fixing and wiring rotary selector switch suitable for Voltmeter. (Sl.No.5, Item No.5.28, Page No.19, PWD Ele SR 2 2023-2024). Each 160.0 160.0 2.0 False None None False None False 320.0 0 4095418 159490 None ITEM126 Supplying, fixing and wiring 3 Phase Digital Ammeter / Voltmeter. (Sl.No.5, Item No.5.29, Page No.19, PWD Ele SR 2 2023-2024). Each 1425.0 1425.0 2.0 False None None False None False 2850.0 0 4095419 159490 None ITEM127 Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 32/63 A three phase 4 wire whole current class-1 Accuracy Energy Meter. (Sl.No.5, Item No.5.35, Page No.19, PWD Ele SR 2 2023-2024). Each 5705.0 5705.0 1.0 False None None False None False 5705.0 0 4095420 159490 None ITEM128 Supplying, fixing and wiring heavy duty low voltage capacitors conforming to IS 2834. 3 phase, 400/440 V grade, for power factor improvement of rotating machineries like induction motor.(Sl.No.5, Item No.5.37, Page No.19, PWD Ele SR 2 2023-2024). Kvar 480.0 480.0 6.0 False None None False None False 2880.0 0 4095421 159490 None ITEM129 Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C.(Sl.No.5, Item No.5.38, Page No.19, PWD Ele SR 2 2023-2024). Each 515.0 515.0 12.0 False None None False None False 6180.0 0 4095422 159490 None ITEM130 Supplying 100 A 4 x 30 x 6 mm Aluminium Strips rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete. (Sl.No.5, Item No.5.40.1, Page No.20, PWD Ele SR 2 2023-2024). m 2465.0 2465.0 2.0 False None None False None False 4930.0 0 4095423 159490 None ITEM131 Fabricating supplying and mounting MS box made out 16SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clA with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour etc., complete. (Sl.No.5, Item No.5.40.1, Page No.20, PWD Ele SR 2 2023-2024). Sq CM 0.43 0.43 12000.0 False None None False None False 5160.0 0 4095424 159490 None ITEM132 Supply and Installation / Fixing / Provision of Outdoor type Thermoplastic Modular Panel enclosure with transparent Polycarbonate Lid, shock proof, IP65 (Weather Proof), rust proof, dust proof, water proof, corrosion proof having internally Embedded gasket on both lid and flap suitable to fix Single Phase / Three Phase Energy Meter in suitable base plate and having a provision for Fuse / MCB cut-out with suitable transparent hinged flap opening for operating MCB along with complete tamper proof SEALING facility.300 mm x 600 mm x 170 mm(Sl.No.5, Item No.5.44.3, Page No.21, PWD Ele SR 2 2023-2024). Each 6867.0 6867.0 1.0 False None None False None False 6867.0 0 4095425 159490 None ITEM133 Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball bearing system.(Sl.No.11, Item No.11.3.2, Page No.43 , PWD Ele SR 2 2023-2024). Each 2984.0 2984.0 15.0 False None None False None False 44760.0 0 4095426 159490 None ITEM134 Fixing a ceiling /wall mounting fan of all capacities and all types, with necessary clA and 'S' hook made out of 15mm dia MS rod, with 5 A. ceiling rose of approved quality with necessary length of 23/0.0076 inch PVC insulated twin twisted wire of approved quality, mounted on a suitable size wooden board and wired. (Sl.No.13, Item No.13.11, Page No.57, PWD Ele SR 2 2023-2024). Each 315.0 315.0 15.0 False None None False None False 4725.0 0 4095427 159490 None ITEM135 Supplying of LED light fitting 1 x 4' - 36/40 W -PVC Batten with high quality diffuser with Life of 25000 burning hours and 70percent lumen maintenance with CRI grater than 80. Power Input: 220-240Vat 50/60Hz and Power factor greater than 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition.(Sl.No.11, Item No.11.3.2, Page No.43 , PWD Ele SR 2 2023-2024). Each 1269.0 1269.0 24.0 False None None False None False 30456.0 0 4095428 159490 None ITEM136 Supply of 200W LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output Rated life Burning Hrs 50000 hr at Lumen Maintenance of 70percent, maximum light intensity should be between 60 degrees to 70 degrees. CCT greater than 5500K, IP66 optical and electrical compartment and impact resistance of complete luminaire greater than IK08. Power Factor greater than 0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mounting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 and LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with 200W System Power consumption. LED Efficiency greater than 1301m/w, nominal CRI greater than 75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI and any Government certified agency and Design and Development facility certified by ISO 9001:2008. Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect(Sl.No.11, Item No.11.8.8, Page No.45 , PWD Ele SR 2 2023-2024). Each 19094.0 19094.0 12.0 False None None False None False 229128.0 0 4095429 159490 None ITEM137 Supplying and Fixing 32.mm dia class A GI pipe bracket upto 2.7 meters long terminated with a reducing collar of 40x25mm to which extra pipe of 175mm length is fixed for fixing MV/SV/MH/FTL street light fitting of all capacities on rail/RCC/wall/tubular pole, using suitable clA, bolts, nuts and wiring using suitable capacity wires. (Sl.No.13, Item No.13.2.2, Page No.56, PWD Ele SR 2 2023-2024). Each 1295.0 1295.0 12.0 False None None False None False 15540.0 0 4095430 159490 None ITEM138 Supply of LED floodlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate/clear glass material, delivering superior light output Rated life Burning Hrs 50000 hr at Lumen Maintenance of 70percent, CCT greater than 5500K, IP 66 optical and electrical compartment and impact resistance of complete luminaire greater than IK08. Power Factor greater than 0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mauling with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100 V to 270V 50/60Hz application. Compliance to IS 10322/ IEC 60598, LM 79 and LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with W System Power consumption. LED Efficiency greater than 1301m/w, nominal CRI greater than 75. Luminaire manufacturer should have in- house facility accredited by NABL / CPRI and any Government certified agency and Design and Development facility certified by ISO 9001:2008. Housing with supplier word mark / name shall be Engraved / Embossing on the die cast housing / Body part Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufactuerer and Cree/Nischia/ Lumileds/ Osram make LED source. LED Flood Lights 100 watts.(Sl.No.46, Item No.11.9.2, Page No.46, PWD Ele SR 2 2023-2024). Each 9486.0 9486.0 22.0 False None None False None False 208692.0 0 4095431 159490 None ITEM139 Fixing halogen/metal halide /SVL/IL/LED floodlight fitting over existing pole / wall ceiling including clA, bolts, nuts and wiring using suitable capacity wires.. (Sl.No.13, Item No.13.5, Page No.56, PWD Ele SR 2 2023-2024). Each 162.0 162.0 34.0 False None None False None False 5508.0 0 4095432 159490 None ITEM140 Fixing all types and all capacities of 1'x4' / 2'x2' LED Light fittings indoor on the wall / ceiling / rafters / girders with necessary supporting frame, using 2310.0076inch twin twisted PVC insulated wires, required Nos of round blocks and clA. (Sl.No.13, Item No.13.19, Page No.58, PWD Ele SR 2 2023-2024). Each 490.0 490.0 24.0 False None None False None False 11760.0 0 4095433 159490 None ITEM141 Erection of single phase preventer / ammeters / including fixing selector switch / voltmeter / current operated earth leakage circuit breakers / voltage operated circuit breaker / above 100A fuse channel set (3 Nos) HRC fuses above100A (3 Nos.) / Digital ammeter/digital volt meter/set of3 indicating lA /MCB / Relays /A-V selector switches including wiring using suitable capacity wires, bolts, nuts, screws. (Sl.No.13, Item No.13.16, Page No.57, PWD Ele SR 2 2023-2024). Each 198.0 198.0 10.0 False None None False None False 1980.0 0 4095434 159490 None ITEM142 Use of special hardware for longer life, Insulation material meets exacting IS 8183 specifications for better sound attenuation, Flush styling - no projections, Fluid drains for lube oil and fuel, Fuel filling point inside the enclosure. The complete set shall have sufficient safety and adhere to NEC, NBC 2016, IEC, CPWD specifications, PCB norms and KSGEI Acts and Rules. 62.5 kVA/50kW (Sl.No.10, Item No.10.1.7, Page No.42, PWD Ele SR 2 2023-2024). Set 641071.0 641071.0 1.0 False None None False None False 641071.0 0 4095435 159490 None ITEM143 Supply, Erection, testing and commissioning of AMF panel suitable for .....kVA DG set. The panel is of cubical type base/floor mounting control panel with hinged doors, undrilled bottom gland plate, aluminium Bus Bar with the accommodation for .....A 4 pole contactor for alternator with thermal O/L relay,..... A 4 pole contactor for mains, HRC fuse for short circuit protection, Microprocessor based AMF module with supply failure timer, Restoration timer, 3 impulse automatic engine start/stop logic, Mains/generator voltage, ....capacity bypass switch and frequency sensing, PCC 1301controller with water temperature/Lube oil pressure/ engine speed, Voltage/ampere/Frequency/ kVA, Running-hour count, No of starts, Fault indication, over / under speed, Fails to start, Low oil pleasure, High engine temperature, Under/over voltage, over current, Earth fault relay, with indications for Mains on, Load on Mains, Battery charger on Push buttons AMF module by pass Mode, Battery charger unit with inbuilt Auto/Manual and Flat/Boost facility. The complete set shall have sufficient safety and adhere to NEC, NBC 2016, IEC, CPWD specifications, PCB norms and KSGEI Acts and Rules. 62.50 KVA. (Sl.No.10, Item No.10.2.3, Page No.42, PWD Ele SR 2 2023-2024). Each 77768.0 77768.0 1.0 False None None False None False 77768.0 0 4095436 159490 None ITEM144 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled-device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:[ P- 123,14.1.1/VOL:-2] Nos 5030.52 5030.52 6.0 False None None False None False 30183.12 0 4095437 159490 None ITEM145 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern and C.P. flush bend with fittings and C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : Nos 6156.31 6156.31 10.0 False None None False None False 61563.1 0 4095438 159490 None ITEM146 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: Nos 3174.46 3174.46 10.0 False None None False None False 31744.6 0 4095439 159490 None ITEM147 Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required Nos 13331.29 13331.29 6.0 False None None False None False 79987.74 0 4095440 159490 None ITEM148 Providing and fixing Bib cock with wall flange made of Stainless steel with all concealed fitting arrangements and all necessary accesories complete - Clas Nos 2498.78 2498.78 55.0 False None None False None False 137432.9 0 4095441 159490 None ITEM149 Providing and fixing Exposed set for concealed stop cock made of Stainless steel with all concealed fitting arrangements and all necessary accesories complete - Class Nos 883.74 883.74 65.0 False None None False None False 57443.1 0 4095442 159490 None ITEM150 Providing and fixing PVC (S.W.R) Nahani Trap 10cms x 10cms with all fitting arrangements and all necessary accessories complete Nos 226.6 226.6 47.0 False None None False None False 10650.2 0 4095443 159490 None ITEM151 Providing and fixing toilet paper holder : Nos 626.24 626.24 18.0 False None None False None False 11272.32 0 4095444 159490 None ITEM152 Providing and fixing Pillar cock with high neck with 265mm Extended body made of Stainless steel with all concealed fitting arrangements and all necessary accesories complete - Class Nos 4976.96 4976.96 10.0 False None None False None False 49769.6 0 4095445 159490 None ITEM153 Providing and fixing PTMT, push cock of approved quality and colour. Nos 131.84 131.84 8.0 False None None False None False 1054.72 0 4095446 159490 None ITEM154 Providing and fixing Overhead rain showers of minimum dimension 225x225mm and wall flange made of Stainless steel with all concealed fitting arrangements and all necessary accesories complete - Class Nos 6123.35 6123.35 20.0 False None None False None False 122467.0 0 4095447 159490 None ITEM155 Providing and fixing 20mm dia chorinated poly vinyl Chloride (CPVC) pipes conforming to IS 15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00 mtr spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete. (Concealed work including cutting chases and making good walls). [P-100,13.86.2]-2018-19 m 290.46 290.46 351.0 False None None False None False 101951.46 0 4095448 159490 None ITEM156 Providing and fixing 25mm dia chorinated poly vinyl Chloride (CPVC) pipes conforming to IS 15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00 mtr spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete. (Concealed work including cutting chases and making good walls). [P-100,13.86.3]-2018-19 m 362.14 362.14 200.0 False None None False None False 72428.0 0 4095449 159490 None ITEM157 Making soak pit 2.5 m diameter 3.0 m deep with 45 x 45 cm dry brick honey comb shaft with bricks and PVC S.W.R drain pipe 100 mm diameter, 1.8 m long complete as per standard design.With common burnt clay (non modular) bricks of class designation 3.5 Nos 23714.72 23714.72 4.0 False None None False None False 94858.88 0 4095450 159490 None ITEM158 Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead and lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. complete For: 110mm m 1260.0 1260.0 305.0 False None None False None False 384300.0 0 4095451 159490 None ITEM159 Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead and lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. complete For: 75 mm m 740.0 740.0 300.0 False None None False None False 222000.0 0 4095452 159490 None ITEM160 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. Ltr 9.27 9.27 5000.0 False None None False None False 46350.0 0 4095453 159490 None ITEM161 Fixing, installing and testing 15mm CP health faucet of approved make with necessary CP flexible hose 1000mm long nozzle, CP wall flange, CP angle cock etc., complete. MR Nos 4620.0 4620.0 12.0 False None None False None False 55440.0 0 4095454 159490 None ITEM162 Providing and fixing bevelled edge Mirror -[ Non SR item ] Nos 12000.0 12000.0 12.0 False None None False None False 144000.0 0
generalCriterionList	createdTs version createdDate modifiedDate criterionType description tenderEligibilityCriterionDocumentList 1727434594000 0 None None ELIGIBILITY Tenders from Joint ventures are not acceptable. None 1727434594000 0 None None ELIGIBILITY Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka None 1727434594000 0 None None ELIGIBILITY Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document. None 1727434594000 0 None None ELIGIBILITY It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission. None 1727434594000 0 None None ELIGIBILITY EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection. None 1727434618000 0 None None ELIGIBILITY RATES QUOTED BY THE BIDDERS SHALL BE EXCLUSIVE OF TAXES None
preQualCriterionList	None
technicalCriterionList	createdTs version createdDate modifiedDate description criterionCategoryText criterionTypeOthersValue tenderTechnicalCriterionDocumentList None None None None Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs) None None None None None None Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender) None None None None None None Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction) None None None None None None Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year None None None None None None Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year None None None None None None Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx) None None None None None None Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period) None None None None None None Total value of civl engineering works executed and payments received in the last five years (year-wise) None None None None None None List of existing commitments and ongoing works None None None None None None List of works for which tenders already submitted None None None None None None Banker Details for reference None None None None None None Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded None None None None None None Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years None None None None None None Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded None None None None None None List of Financial Resources with Certificates None None None None None None ALL THE CRITERION ARE AS PER THE TENDER DOCUMENT Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- all the concerned docs
tenderCriterionDocumentList	documentName optional documentTypeText Annual Turnover Certificate False Technical Bid Company Registration Certificate False Technical Bid Reserved Category Certificate False Technical Bid Small Scale Industries Certificate False Technical Bid
tenderWorkLocationList
tenderAddress	createdTs 1727435799000 version 0 createdDate None modifiedDate None blockNumber YAVANIKA, STATE YOUTH CENTRE, NRUPATHUNGA ROAD street None city BENGALURU state Karnataka pin 560001
tenderRecallDTO	None