createdTs	None
version	None
createdDate	None
modifiedDate	None
noticeInvitingTenderDTO	createdTs 1727336653950 version 3 createdDate None modifiedDate None tenderType RFQ evaluationType TWO_COVER evaluationTypeText Two Cover invitingStrategy OPEN invitingStrategyText Open taxType INCLUSIVE_TAX tenderFee 5000.00 emd 910000.00 bidValueType ITEM_WISE bidValueTypeText Item wise tenderReceiptClose 28-10-2024 16:00:00 tenderQueryClose 07-10-2024 16:00:00 technicalBidOpen 30-10-2024 16:00:00 publishedDate 27-09-2024 16:50:41 publishedByPost KHB_EE2_CO_BNG publishedByUser KPE11678 - LOKESHBABU C G bidValidityPeriod 180 noOfCalls 1 preBidMeetingDate 08-10-2024 11:00:00 preBidMeetingYn True preQualificationBidOpen None denominationType RUPEES denominationTypeText Rupees retenderedYn None percentageRateTypeText None contactPerson Lokesh Babu C G splitEmdRequiredYn False emdBankGuarantee None emdCash None bgValidityPeriod None hideWeightage None multipleCurrencySelectionAllowedYn False isTechWeightageAllowed False highestBidderSelection False isVariableEmdAllowed None qcbsTenderYn None itemwiseEmdRequiredYn None sampleSubmissionDate None officeNumber 08022273511 mobileNumber 8022273511 tenderSupplierList None
tenderSchedule	createdTs 1727336653967 version 4 createdDate None modifiedDate None tenderNumber KHB/2024-25/BD/WORK_INDENT300 title Construction of classrooms/toilet block/Laboratory & other allied works for Govt.First Grade College at Gouribidanuru in Chikkaballapura District under SCP/TSP 2023-24 scheme description Construction of classrooms/toilet block/Laboratory & other allied works for Govt.First Grade College at Gouribidanuru in Chikkaballapura District under SCP/TSP 2023-24 scheme category WORKS categoryText Works ecv 60334493.94 deptName Karnataka Housing Board status PUBLISHED statusText Published remarks None csrValue None ecvtenderYn False location 5488 locationName KHB Central Office Bengaluru provisionalAmount 60334494.0 groupOverheadTotal None fileNumber 267/24-25
tenderSubEstimateList	createdTs version createdDate modifiedDate workCategoryName subEstimateName estimateTotal itemList 1727336654000 0 None None Buildings Construction of classrooms/toilet block/Laboratory & other allied works for Govt.First Grade College at Gouribidanuru in Chikkaballapura District under SCP/TSP 2023-24 scheme 60334493.94 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 4081126 158838 None code01 Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material to the appropriate disposal area as per direction of Engineer-in-charge Asbestos cement sheet Sqm 52.53 52.53 513.0 False None None False None False 26947.89 0 4081127 158838 None code02 Demolishing brick work manually/ by mechanical means including stack ing of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge. In cement mortar Cum 1059.87 1059.87 118.7462 False None None False None False 125855.534994 0 4081128 158838 None code03 Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, including removal and disposal of top organic soil not exceeding 150 mm in thickness.By Mechanical Means using Dozer.A In area of light jungle ha 404.79 404.79 6.65 False None None False None False 2691.8535 0 4081129 158838 None code04 Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work. In all kinds of soils upto 300 mm depth Cum 97.85 97.85 199.5 False None None False None False 19521.075 0 4081130 158838 None code05 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In all kinds of soils Depth upto 3 m Footings Cum 105.06 105.06 956.25 False None None False None False 100463.625 0 4081131 158838 None code06 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In ordinary/soft rock without blasting upto 1.5 m depth Cum 373.89 373.89 175.1 False None None False None False 65468.139 0 4081132 158838 None code07 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In ordinary/soft rock without blasting 1.5 to 3 m depth Cum 437.75 437.75 70.04 False None None False None False 30660.01 0 4081133 158838 None code08 Loading and Unloading of Stone Boulder/Stone aggregates/ Sand/Kankar/Moorum. (Disposal of 10Km) Cum 122.57 122.57 295.15 False None None False None False 36176.5355 0 4081134 158838 None code09 Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 l/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications. Sqm 121.54 121.54 465.0 False None None False None False 56516.1 0 4081135 158838 None code10 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. Cum 273.98 273.98 950.16 False None None False None False 260324.8368 0 4081136 158838 None code11 Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work. Cum 488.22 488.22 174.32 False None None False None False 85106.5104 0 4081137 158838 None code12 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, formwork , cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (Rate including Formwork, Centering & Scaffolding and The cost of steel reinforcement shall be paid separately) Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates Cum 6168.67 6168.67 94.65 False None None False None False 583864.6155 0 4081138 158838 None code13 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (Rate including Formwork, Centering & Scaffolding and The cost of steel reinforcement shall be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates FOOTINGS Cum 7048.17 7048.17 238.34 False None None False None False 1679860.8378 0 4081139 158838 None code14 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 7178.69 7178.69 9.0 False None None False None False 64608.21 0 4081140 158838 None code15 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 7178.69 7178.69 8.16 False None None False None False 58578.1104 0 4081141 158838 None code16 Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Plinth Beam (Rate including Formwork, Centering & Scaffolding and The cost of steel reinforcement shall be paid separately) Cum 10011.6 10011.6 38.52 False None None False None False 385646.832 0 4081142 158838 None code17 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. ((Rate including Formwork, Centering & Scaffolding and The cost of steel reinforcement shall be paid separately)) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates COLUMNS GROUND FLOOR Cum 11351.73 11351.73 26.74 False None None False None False 303545.2602 0 4081143 158838 None code18 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (Rate including Formwork, Centering & Scaffolding and The cost of steel reinforcement shall be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates PLINTH Cum 10016.24 10016.24 16.84 False None None False None False 168673.4816 0 4081144 158838 None code19 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (Rate including Formwork, Centering & Scaffolding and The cost of steel reinforcement shall be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Lift Wall Cum 7345.24 7345.24 9.0 False None None False None False 66107.16 0 4081145 158838 None code20 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (Rate including Formwork, Centering & Scaffolding and The cost of steel reinforcement shall be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates RCC BEAMS Cum 10683.98 10683.98 60.36 False None None False None False 644885.0328 0 4081146 158838 None code21 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (Rate including Formwork, Centering & Scaffolding and The cost of steel reinforcement shall be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates RCC SLAB Cum 10016.24 10016.24 80.81 False None None False None False 809412.3544 0 4081147 158838 None code22 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (Rate including Formwork, Centering & Scaffolding and The cost of steel reinforcement shall be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregate LINTELS Cum 10683.98 10683.98 6.27 False None None False None False 66988.5546 0 4081148 158838 None code23 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (Rate including Formwork, Centering & Scaffolding and The cost of steel reinforcement shall be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregate RCC STAIRCASE Cum 9682.36 9682.36 6.25 False None None False None False 60514.75 0 4081149 158838 None code24 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (Rate including Formwork, Centering & Scaffolding and The cost of steel reinforcement shall be paid separately) Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates Cum 9285.09 9285.09 6.29 False None None False None False 58403.2161 0 4081150 158838 None code25 Providing and inserting nipples with approved fixing compound after drilling holes for grouting as per Technical Specifications including subsequent cutting/removal and sealing of the hole as necessary of nipples after completion of grouting with Cement/Epoxy No 210.12 210.12 20.0 False None None False None False 4202.4 0 4081151 158838 None code26 Providing Lath plaster with cement mortar 1:3 5cm thick with 6mm dia mild steel bars at 20cms. C to c both horizontally and vertically fixing chicken mesh for drop chejjas, facia, backing to cup board including cost of all materials, labour, providing and removing form work HOM of machineries, curing, complete as per specification. Sqm 1275.14 1275.14 8.49 False None None False None False 10825.9386 0 4081152 158838 None code27 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, traightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Tonne 92140.71 92140.71 42.09 False None None False None False 3878202.4839 0 4081153 158838 None code28 Extra for providing throating or drip moulding to RCC chejjas with plastering ( labour charges only ) as per specifications. Specification No . KBS m 33.0 33.0 68.4 False None None False None False 2257.2 0 4081154 158838 None code29 Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 6580.67 6580.67 59.88 False None None False None False 394050.5196 0 4081155 158838 None code30 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. Sqm 1349.3 1349.3 712.71 False None None False None False 961659.603 0 4081156 158838 None code31 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. Sqm 1137.12 1137.12 27.75 False None None False None False 31555.08 0 4081157 158838 None code32 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. Cum 101779.45 101779.45 0.67 False None None False None False 68192.2315 0 4081158 158838 None code33 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. Nos 1046.48 1046.48 8.0 False None None False None False 8371.84 0 4081159 158838 None code34 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. Nos 1083.56 1083.56 8.0 False None None False None False 8668.48 0 4081160 158838 None code35 Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. complete. Nos 1019.7 1019.7 8.0 False None None False None False 8157.6 0 4081161 158838 None code36 Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete Nos 244.11 244.11 16.0 False None None False None False 3905.76 0 4081162 158838 None code37 Providing and fixing aluminium tower bolts, ISI marked, anodised (an- odic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete Nos 133.9 133.9 16.0 False None None False None False 2142.4 0 4081163 158838 None code38 Providing and fixing PTMT door catcher of length 72 mm and dia. of 42 mm with suitable washers weighing not less than 33 gms Nos 56.65 56.65 8.0 False None None False None False 453.2 0 4081164 158838 None code39 Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : : 125x85x5.5 mm (heavy type) Nos 283.25 283.25 16.0 False None None False None False 4532.0 0 4081165 158838 None code40 Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Fastener with threaded dia 12 mm Nos 61.8 61.8 48.0 False None None False None False 2966.4 0 4081166 158838 None code41 Supplying and fixing new Honne wood beads wherever necessary including cost of materials, labour, complete as per specifications. m 42.0 42.0 61.2 False None None False None False 2570.4 0 4081167 158838 None code42 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification. -do- 35 mm thick both side commercial Sqm 3421.66 3421.66 27.36 False None None False None False 93616.6176 0 4081168 158838 None code43 Providing & fixing of 2.5 track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 94mm width x 45mm height with reinforcement of 1mm thickness and Sash with overall size of 39mm x 58mm with GI reinforcement of 1.5mm and mesh sash of size 25mm x 42mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 5mm plain float glass, standard hardware& single point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 1819mm x 1819mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) Sqm 6747.53 6747.53 22.5 False None None False None False 151819.425 0 4081169 158838 None code44 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) Sqm 5890.57 5890.57 8.64 False None None False None False 50894.5248 0 4081170 158838 None code45 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding Kg 173.04 173.04 653.94 False None None False None False 113157.7776 0 4081171 158838 None code46 Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long brackets of 15x15mm M.S Square tube, the entire door frame to be reinforced with 19x19mm M.S Square tube of 19 gauge. The door frame to be fixed to the wall using M.S. Screws of 65/80mm size complete as per manufacturers specification & direction of Engineer-in-charge. m 327.54 327.54 59.0 False None None False None False 19324.86 0 4081172 158838 None code47 Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Prelaminated PVC C Channel of 5mm thick sheet & 30x50mm wide to form stiles & 5mm thick & 75mm wide Prelaminated PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet Prelaminated on either side fitted in the M.S. frame, Sealed to the stiles & rails with PVC Designer beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75mm Aluminium hinges.- with one side prelam Sqm 2101.2 2101.2 26.4 False None None False None False 55471.68 0 4081173 158838 None code48 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. Nos 1147.42 1147.42 10.0 False None None False None False 11474.2 0 4081174 158838 None code49 Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge... (Inside) Sqm 321.36 321.36 720.99 False None None False None False 231697.3464 0 4081175 158838 None code50 Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 217.33 217.33 538.7 False None None False None False 117075.671 0 4081176 158838 None code51 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. Sqm 103.0 103.0 1707.1 False None None False None False 175831.3 0 4081177 158838 None code52 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.. ( Outside) Sqm 359.47 359.47 719.64 False None None False None False 258688.9908 0 4081178 158838 None code53 Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge: 10mm to 15 mm wide and 8 mm deep groove. m 53.56 53.56 874.76 False None None False None False 46852.1456 0 4081179 158838 None code54 Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. ( length of mesh only be measured for payment Plaster mesh 200mm wide m 44.0 44.0 1492.8 False None None False None False 65683.2 0 4081180 158838 None code55 Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 600x600 mm Sqm 1210.25 1210.25 277.6 False None None False None False 335965.4 0 4081181 158838 None code56 Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : ** Flamed finish granite stone slab Black, Cherry Red, Brown, Cat Eye, River Pink or equivalent. Sqm 2539.98 2539.98 182.03 False None None False None False 462352.5594 0 4081182 158838 None code57 Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU wa terproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6 kg/m2 to achieve final DFT (Dry Film Thickness) of 1mm including prime coat of epoxy primer @150 g/m2 and protection with 120gsm Geo-textile over the wa terproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification. Sqm 841.51 841.51 40.2 False None None False None False 33828.702 0 4081183 158838 None code58 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/m2 including pointing the joints with white cement and matching pigment etc., complete. Sqm 915.67 915.67 40.2 False None None False None False 36809.934 0 4081184 158838 None code59 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. Sqm 1492.47 1492.47 117.18 False None None False None False 174887.6346 0 4081185 158838 None code60 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 303.85 303.85 117.18 False None None False None False 35605.143 0 4081186 158838 None code61 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Kg 581.95 581.95 255.05 False None None False None False 148426.3475 0 4081187 158838 None code62 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 130.81 130.81 1707.1 False None None False None False 223305.751 0 4081188 158838 None code63 Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 160.68 160.68 719.64 False None None False None False 115631.7552 0 4081189 158838 None code64 Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 51.5 51.5 31.14 False None None False None False 1603.71 0 4081190 158838 None code65 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 118.45 118.45 31.14 False None None False None False 3688.533 0 4081191 158838 None code66 Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 54.59 54.59 65.66 False None None False None False 3584.3794 0 4081192 158838 None code67 Polishing on wood work with ready mixed wax polish of approved brand and manufacture : New work to give an even surface including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 139.05 139.05 65.66 False None None False None False 9130.023 0 4081193 158838 None code68 Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Kgs 116.39 116.39 2166.0 False None None False None False 252100.74 0 4081194 158838 None code69 Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer including cost of materials ,labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge Sqm 8524.28 8524.28 28.8 False None None False None False 245499.264 0 4081195 158838 None code70 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (Rate including Formwork, Centering & Scaffolding and The cost of steel reinforcement shall be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates COLUMNS First FLOOR Cum 11465.25 11465.25 18.88 False None None False None False 216463.92 0 4081196 158838 None code71 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (Rate including Formwork, Centering & Scaffolding and The cost of steel reinforcement shall be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates First Floor RCC BEAMS Cum 10790.82 10790.82 52.27 False None None False None False 564036.1614 0 4081197 158838 None code72 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (Rate including Formwork, Centering & Scaffolding and The cost of steel reinforcement shall be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates First Floor RCC SLAB Cum 10116.4 10116.4 80.81 False None None False None False 817506.284 0 4081198 158838 None code73 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (Rate including Formwork, Centering & Scaffolding and The cost of steel reinforcement shall be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates First Floor Lift Wall Cum 7345.24 7345.24 9.0 False None None False None False 66107.16 0 4081199 158838 None code74 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (Rate including Formwork, Centering & Scaffolding and The cost of steel reinforcement shall be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates First Floor LINTELS Cum 10790.82 10790.82 6.36 False None None False None False 68629.6152 0 4081200 158838 None code75 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (Rate including Formwork, Centering & Scaffolding and The cost of steel reinforcement shall be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates First Floor RCC STAIRCASE Cum 9779.18 9779.18 6.25 False None None False None False 61119.875 0 4081201 158838 None code76 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (Rate including Formwork, Centering & Scaffolding and The cost of steel reinforcement shall be paid separately) Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates First FLOOR Cum 9377.94 9377.94 6.24 False None None False None False 58518.3456 0 4081202 158838 None code77 Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, curing complete as per specifications. Cum 2098.29 2098.29 9.0 False None None False None False 18884.61 0 4081203 158838 None code78 Providing and inserting nipples with approved fixing compound after drilling holes for grouting as per Technical Specifications including subsequent cutting/removal and sealing of the hole as necessary of nipples after completion of grouting with Cement/Epoxy First FLOOR No 212.22 212.22 50.0 False None None False None False 10611.0 0 4081204 158838 None code79 Providing Lath plaster with cement mortar 1:3 5cm thick with 6mm dia mild steel bars at 20cms. C to c both horizontally and vertically fixing chicken mesh for drop chejjas, facia, backing to cup board including cost of all materials, labour, providing and removing form work HOM of machineries, curing, complete as per specification. First FLOOR Sqm 1287.89 1287.89 8.49 False None None False None False 10934.1861 0 4081205 158838 None code80 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, traightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. First FLOOR Tonne 93062.12 93062.12 20.16 False None None False None False 1876132.3392 0 4081206 158838 None code81 Extra for providing throating or drip moulding to RCC chejjas with plastering ( labour charges only ) as per specifications. Specification No . KBS First FLOOR m 33.33 33.33 82.8 False None None False None False 2759.724 0 4081207 158838 None code82 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. First FLOOR Sqm 1362.79 1362.79 728.55 False None None False None False 992860.6545 0 4081208 158838 None code83 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. First FLOOR Sqm 1148.49 1148.49 27.75 False None None False None False 31870.5975 0 4081209 158838 None code84 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. First FLOOR Cum 102797.24 102797.24 0.54 False None None False None False 55510.5096 0 4081210 158838 None code85 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. First FLOOR Nos 1056.94 1056.94 7.0 False None None False None False 7398.58 0 4081211 158838 None code86 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. First FLOOR Nos 1094.4 1094.4 7.0 False None None False None False 7660.8 0 4081212 158838 None code87 Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. complete. First FLOOR Nos 1029.9 1029.9 7.0 False None None False None False 7209.3 0 4081213 158838 None code88 Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete First FLOOR Nos 246.55 246.55 14.0 False None None False None False 3451.7 0 4081214 158838 None code89 Providing and fixing aluminium tower bolts, ISI marked, anodised (an- odic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete First FLOOR Nos 135.24 135.24 14.0 False None None False None False 1893.36 0 4081215 158838 None code90 Providing and fixing PTMT door catcher of length 72 mm and dia. of 42 mm with suitable washers weighing not less than 33 gms First FLOOR Nos 57.22 57.22 7.0 False None None False None False 400.54 0 4081216 158838 None code91 Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : : 125x85x5.5 mm (heavy type) First FLOOR Nos 286.08 286.08 14.0 False None None False None False 4005.12 0 4081217 158838 None code92 Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Fastener with threaded dia 12 mm First FLOOR Nos 62.42 62.42 42.0 False None None False None False 2621.64 0 4081218 158838 None code93 Supplying and fixing new Honne wood beads wherever necessary including cost of materials, labour, complete as per specifications. First FLOOR m 42.42 42.42 51.6 False None None False None False 2188.872 0 4081219 158838 None code94 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification. -do- 35 mm thick both side commercial FirstFLOOR Sqm 3455.88 3455.88 21.6 False None None False None False 74647.008 0 4081220 158838 None code95 Providing & fixing of 2.5 track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 94mm width x 45mm height with reinforcement of 1mm thickness and Sash with overall size of 39mm x 58mm with GI reinforcement of 1.5mm and mesh sash of size 25mm x 42mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 5mm plain float glass, standard hardware& single point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 1819mm x 1819mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) Sqm 6815.01 6815.01 22.5 False None None False None False 153337.725 0 4081221 158838 None code96 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) First FLOOR Sqm 5949.48 5949.48 11.52 False None None False None False 68538.0096 0 4081222 158838 None code97 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding First FLOOR Kg 174.77 174.77 714.42 False None None False None False 124859.1834 0 4081223 158838 None code98 Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long brackets of 15x15mm M.S Square tube, the entire door frame to be reinforced with 19x19mm M.S Square tube of 19 gauge. The door frame to be fixed to the wall using M.S. Screws of 65/80mm size complete as per manufacturers specification & direction of Engineer-in-charge. First FLOOR m 330.82 330.82 11.8 False None None False None False 3903.676 0 4081224 158838 None code99 Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Prelaminated PVC C Channel of 5mm thick sheet & 30x50mm wide to form stiles & 5mm thick & 75mm wide Prelaminated PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet Prelaminated on either side fitted in the M.S. frame, Sealed to the stiles & rails with PVC Designer beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75mm Aluminium hinges.- with one side prelam First FLOOR Sqm 2122.21 2122.21 5.28 False None None False None False 11205.2688 0 4081225 158838 None code100 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. First FLOOR Nos 1158.89 1158.89 9.0 False None None False None False 10430.01 0 4081226 158838 None code101 Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge... (Inside) First floor Sqm 324.57 324.57 725.31 False None None False None False 235413.8667 0 4081227 158838 None code102 Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 219.5 219.5 539.0 False None None False None False 118310.5 0 4081228 158838 None code103 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. First floor Sqm 104.03 104.03 1650.73 False None None False None False 171725.4419 0 4081229 158838 None code104 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.. ( Outside) First floor Sqm 363.06 363.06 723.96 False None None False None False 262840.9176 0 4081230 158838 None code105 Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge: 10mm to 15 mm wide and 8 mm deep groove. First floor m 54.1 54.1 874.76 False None None False None False 47324.516 0 4081231 158838 None code106 Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. ( length of mesh only be measured for payment Plaster mesh 200mm wide First floor m 44.44 44.44 1395.6 False None None False None False 62020.464 0 4081232 158838 None code107 Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 600x600 mm First floor Sqm 1222.35 1222.35 277.6 False None None False None False 339324.36 0 4081233 158838 None code108 Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : ** Flamed finish granite stone slab Black, Cherry Red, Brown, Cat Eye, River Pink or equivalent. First floor Sqm 2565.38 2565.38 152.88 False None None False None False 392195.2944 0 4081234 158838 None code109 Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU wa terproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6 kg/m2 to achieve final DFT (Dry Film Thickness) of 1mm including prime coat of epoxy primer @150 g/m2 and protection with 120gsm Geo-textile over the wa terproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification. First floor Sqm 849.93 849.93 43.2 False None None False None False 36716.976 0 4081235 158838 None code110 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/m2 including pointing the joints with white cement and matching pigment etc., complete. First floor Sqm 924.83 924.83 43.2 False None None False None False 39952.656 0 4081236 158838 None code111 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. First floor Sqm 1507.39 1507.39 76.02 False None None False None False 114591.7878 0 4081237 158838 None code112 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. First floor Sqm 306.89 306.89 76.02 False None None False None False 23329.7778 0 4081238 158838 None code113 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. First floor Kg 587.77 587.77 255.05 False None None False None False 149910.7385 0 4081239 158838 None code114 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. First floor Sqm 132.12 132.12 1650.73 False None None False None False 218094.4476 0 4081240 158838 None code115 Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. First floor Sqm 162.29 162.29 723.96 False None None False None False 117491.4684 0 4081241 158838 None code116 Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. First floor Sqm 52.02 52.02 34.02 False None None False None False 1769.7204 0 4081242 158838 None code117 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. First floor Sqm 119.63 119.63 34.02 False None None False None False 4069.8126 0 4081243 158838 None code118 Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. First floor Sqm 55.14 55.14 51.84 False None None False None False 2858.4576 0 4081244 158838 None code119 Polishing on wood work with ready mixed wax polish of approved brand and manufacture : New work to give an even surface including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. First floor Sqm 140.44 140.44 51.84 False None None False None False 7280.4096 0 4081245 158838 None code120 Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. First floor Kgs 116.39 116.39 2166.0 False None None False None False 252100.74 0 4081246 158838 None code121 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (Rate including Formwork, Centering & Scaffolding and The cost of steel reinforcement shall be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Second floor COLUMNS Cum 11578.77 11578.77 18.88 False None None False None False 218607.1776 0 4081247 158838 None code122 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (Rate including Formwork, Centering & Scaffolding and The cost of steel reinforcement shall be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Second floor RCC BEAMS Cum 10897.66 10897.66 52.27 False None None False None False 569620.6882 0 4081248 158838 None code123 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (Rate including Formwork, Centering & Scaffolding and The cost of steel reinforcement shall be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Second floor Second FLOOR Cum 10216.56 10216.56 80.81 False None None False None False 825600.2136 0 4081249 158838 None code124 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (Rate including Formwork, Centering & Scaffolding and The cost of steel reinforcement shall be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Second floor Lift Wall Cum 7345.24 7345.24 9.0 False None None False None False 66107.16 0 4081250 158838 None code125 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (Rate including Formwork, Centering & Scaffolding and The cost of steel reinforcement shall be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Second floor LINTELS Cum 10897.66 10897.66 6.36 False None None False None False 69309.1176 0 4081251 158838 None code126 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (Rate including Formwork, Centering & Scaffolding and The cost of steel reinforcement shall be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Second floor RCC STAIRCASE Cum 9876.01 9876.01 6.25 False None None False None False 61725.0625 0 4081252 158838 None code127 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (Rate including Formwork, Centering & Scaffolding and The cost of steel reinforcement shall be paid separately) Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates Second floor Cum 9470.79 9470.79 6.24 False None None False None False 59097.7296 0 4081253 158838 None code128 Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, curing complete as per specifications. Second floor Cum 2098.29 2098.29 9.0 False None None False None False 18884.61 0 4081254 158838 None code129 Providing and inserting nipples with approved fixing compound after drilling holes for grouting as per Technical Specifications including subsequent cutting/removal and sealing of the hole as necessary of nipples after completion of grouting with Cement/Epoxy Second floor No 214.32 214.32 50.0 False None None False None False 10716.0 0 4081255 158838 None code130 Providing Lath plaster with cement mortar 1:3 5cm thick with 6mm dia mild steel bars at 20cms. C to c both horizontally and vertically fixing chicken mesh for drop chejjas, facia, backing to cup board including cost of all materials, labour, providing and removing form work HOM of machineries, curing, complete as per specification. Second floor Sqm 1300.64 1300.64 8.49 False None None False None False 11042.4336 0 4081256 158838 None code131 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, traightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Second floor Tonne 93983.52 93983.52 20.16 False None None False None False 1894707.7632 0 4081257 158838 None code132 Extra for providing throating or drip moulding to RCC chejjas with plastering ( labour charges only ) as per specifications. Specification No . KBS Second floor m 33.66 33.66 82.8 False None None False None False 2787.048 0 4081258 158838 None code133 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. Second floor Sqm 1376.29 1376.29 728.55 False None None False None False 1002696.0795 0 4081259 158838 None code134 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. Second floor Sqm 1159.86 1159.86 27.75 False None None False None False 32186.115 0 4081260 158838 None code135 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. Second floor Cum 103815.04 103815.04 0.54 False None None False None False 56060.1216 0 4081261 158838 None code136 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. Second floor Nos 1067.41 1067.41 7.0 False None None False None False 7471.87 0 4081262 158838 None code137 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. Second floor Nos 1105.23 1105.23 7.0 False None None False None False 7736.61 0 4081263 158838 None code138 Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. complete. Second floor Nos 1040.09 1040.09 7.0 False None None False None False 7280.63 0 4081264 158838 None code139 Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete Second floor Nos 248.99 248.99 14.0 False None None False None False 3485.86 0 4081265 158838 None code140 Providing and fixing aluminium tower bolts, ISI marked, anodised (an- odic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete Second floor Nos 136.58 136.58 14.0 False None None False None False 1912.12 0 4081266 158838 None code141 Providing and fixing PTMT door catcher of length 72 mm and dia. of 42 mm with suitable washers weighing not less than 33 gms Second floor Nos 57.78 57.78 7.0 False None None False None False 404.46 0 4081267 158838 None code142 Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : : 125x85x5.5 mm (heavy type) Second floor Nos 288.92 288.92 14.0 False None None False None False 4044.88 0 4081268 158838 None code143 Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Fastener with threaded dia 12 mm Second floor Nos 63.04 63.04 42.0 False None None False None False 2647.68 0 4081269 158838 None code144 Supplying and fixing new Honne wood beads wherever necessary including cost of materials, labour, complete as per specifications. Second floor m 42.84 42.84 51.6 False None None False None False 2210.544 0 4081270 158838 None code145 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification. -do- 35 mm thick both side commercial Sqm 3490.09 3490.09 21.6 False None None False None False 75385.944 0 4081271 158838 None code146 Providing & fixing of 2.5 track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 94mm width x 45mm height with reinforcement of 1mm thickness and Sash with overall size of 39mm x 58mm with GI reinforcement of 1.5mm and mesh sash of size 25mm x 42mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 5mm plain float glass, standard hardware& single point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 1819mm x 1819mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) Sqm 6882.48 6882.48 22.5 False None None False None False 154855.8 0 4081272 158838 None code147 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) Second floor Sqm 6008.38 6008.38 11.52 False None None False None False 69216.5376 0 4081273 158838 None code148 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding Second floor Kg 176.5 176.5 714.42 False None None False None False 126095.13 0 4081274 158838 None code149 Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long brackets of 15x15mm M.S Square tube, the entire door frame to be reinforced with 19x19mm M.S Square tube of 19 gauge. The door frame to be fixed to the wall using M.S. Screws of 65/80mm size complete as per manufacturers specification & direction of Engineer-in-charge. Second floor m 334.09 334.09 11.8 False None None False None False 3942.262 0 4081275 158838 None code150 Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Prelaminated PVC C Channel of 5mm thick sheet & 30x50mm wide to form stiles & 5mm thick & 75mm wide Prelaminated PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet Prelaminated on either side fitted in the M.S. frame, Sealed to the stiles & rails with PVC Designer beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75mm Aluminium hinges.- with one side prelam Second floor Sqm 2143.22 2143.22 5.28 False None None False None False 11316.2016 0 4081276 158838 None code151 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. Second floor Nos 1170.37 1170.37 9.0 False None None False None False 10533.33 0 4081277 158838 None code152 Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge... (Inside) Second floor Sqm 327.79 327.79 725.31 False None None False None False 237749.3649 0 4081278 158838 None code153 Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 221.68 221.68 539.0 False None None False None False 119485.52 0 4081279 158838 None code154 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. Second floor Sqm 105.06 105.06 1650.73 False None None False None False 173425.6938 0 4081280 158838 None code155 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.. ( Outside) Second floor Sqm 366.66 366.66 723.96 False None None False None False 265447.1736 0 4081281 158838 None code156 Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge: 10mm to 15 mm wide and 8 mm deep groove. Second floor m 54.63 54.63 874.76 False None None False None False 47788.1388 0 4081282 158838 None code157 Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. ( length of mesh only be measured for payment Plaster mesh 200mm wide Second floor m 44.88 44.88 1395.6 False None None False None False 62634.528 0 4081283 158838 None code158 Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 600x600 mm Second floor Sqm 1234.46 1234.46 277.6 False None None False None False 342686.096 0 4081284 158838 None code159 Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : ** Flamed finish granite stone slab Black, Cherry Red, Brown, Cat Eye, River Pink or equivalent. Second floor Sqm 2590.78 2590.78 152.88 False None None False None False 396078.4464 0 4081285 158838 None code160 Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU wa terproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6 kg/m2 to achieve final DFT (Dry Film Thickness) of 1mm including prime coat of epoxy primer @150 g/m2 and protection with 120gsm Geo-textile over the wa terproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification. Second floor Sqm 858.34 858.34 43.2 False None None False None False 37080.288 0 4081286 158838 None code161 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/m2 including pointing the joints with white cement and matching pigment etc., complete. Second floor Sqm 933.98 933.98 43.2 False None None False None False 40347.936 0 4081287 158838 None code162 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. Second floor Sqm 1522.32 1522.32 76.02 False None None False None False 115726.7664 0 4081288 158838 None code163 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Second floor Sqm 309.93 309.93 76.02 False None None False None False 23560.8786 0 4081289 158838 None code164 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Second floor Kg 593.59 593.59 255.05 False None None False None False 151395.1295 0 4081290 158838 None code165 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Second floor Sqm 133.43 133.43 1650.73 False None None False None False 220256.9039 0 4081291 158838 None code166 Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Second floor Sqm 163.89 163.89 723.96 False None None False None False 118649.8044 0 4081292 158838 None code167 Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Second floor Sqm 52.53 52.53 34.02 False None None False None False 1787.0706 0 4081293 158838 None code168 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Second floor Sqm 120.82 120.82 34.02 False None None False None False 4110.2964 0 4081294 158838 None code169 Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Second floor Sqm 55.68 55.68 51.84 False None None False None False 2886.4512 0 4081295 158838 None code170 Polishing on wood work with ready mixed wax polish of approved brand and manufacture : New work to give an even surface including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Second floor Sqm 141.83 141.83 51.84 False None None False None False 7352.4672 0 4081296 158838 None code171 Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Second floor Kgs 118.72 118.72 2166.0 False None None False None False 257147.52 0 4081297 158838 None code172 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (Rate including Formwork, Centering & Scaffolding and The cost of steel reinforcement shall be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates COLUMNS Auditorium Cum 11692.28 11692.28 9.94 False None None False None False 116221.2632 0 4081298 158838 None code173 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (Rate including Formwork, Centering & Scaffolding and The cost of steel reinforcement shall be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates RCC BEAMS Auditorium Cum 11004.5 11004.5 30.31 False None None False None False 333546.395 0 4081299 158838 None code174 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (Rate including Formwork, Centering & Scaffolding and The cost of steel reinforcement shall be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates RCC SLAB Auditorium Cum 10216.56 10216.56 112.58 False None None False None False 1150180.3248 0 4081300 158838 None code175 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (Rate including Formwork, Centering & Scaffolding and The cost of steel reinforcement shall be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Lift Wall Auditorium Cum 7345.24 7345.24 9.0 False None None False None False 66107.16 0 4081301 158838 None code176 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (Rate including Formwork, Centering & Scaffolding and The cost of steel reinforcement shall be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates LINTELS Auditorium Cum 11004.5 11004.5 7.53 False None None False None False 82863.885 0 4081302 158838 None code177 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (Rate including Formwork, Centering & Scaffolding and The cost of steel reinforcement shall be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates RCC STAIRCASE Auditorium Cum 9972.83 9972.83 6.25 False None None False None False 62330.1875 0 4081303 158838 None code178 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (Rate including Formwork, Centering & Scaffolding and The cost of steel reinforcement shall be paid separately) Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates Auditorium Cum 9563.64 9563.64 6.57 False None None False None False 62833.1148 0 4081304 158838 None code179 Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, curing complete as per specifications. Auditorium Cum 2098.29 2098.29 9.0 False None None False None False 18884.61 0 4081305 158838 None code180 Providing and inserting nipples with approved fixing compound after drilling holes for grouting as per Technical Specifications including subsequent cutting/removal and sealing of the hole as necessary of nipples after completion of grouting with Cement/Epoxy Auditorium No 216.42 216.42 20.0 False None None False None False 4328.4 0 4081306 158838 None code181 Providing Lath plaster with cement mortar 1:3 5cm thick with 6mm dia mild steel bars at 20cms. C to c both horizontally and vertically fixing chicken mesh for drop chejjas, facia, backing to cup board including cost of all materials, labour, providing and removing form work HOM of machineries, curing, complete as per specification. Auditorium Sqm 1313.39 1313.39 8.49 False None None False None False 11150.6811 0 4081307 158838 None code182 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, traightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Auditorium Tonne 94904.93 94904.93 9.98 False None None False None False 947151.2014 0 4081308 158838 None code183 Extra for providing throating or drip moulding to RCC chejjas with plastering ( labour charges only ) as per specifications. Specification No . KBS Auditorium m 33.99 33.99 82.0 False None None False None False 2787.18 0 4081309 158838 None code184 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. Auditorium Sqm 1389.78 1389.78 606.47 False None None False None False 842859.8766 0 4081310 158838 None code185 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. Auditorium Sqm 1171.23 1171.23 48.87 False None None False None False 57238.0101 0 4081311 158838 None code186 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. Auditorium Cum 104832.83 104832.83 0.47 False None None False None False 49271.4301 0 4081312 158838 None code187 Fixing of door frame in an existing opening including embedding frame in and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. Auditorium Nos 1077.87 1077.87 6.0 False None None False None False 6467.22 0 4081313 158838 None code188 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. Auditorium Nos 1116.07 1116.07 6.0 False None None False None False 6696.42 0 4081314 158838 None code189 Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. complete. Auditorium Nos 1050.29 1050.29 6.0 False None None False None False 6301.74 0 4081315 158838 None code190 Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete Auditorium Nos 251.43 251.43 12.0 False None None False None False 3017.16 0 4081316 158838 None code191 Providing and fixing aluminium tower bolts, ISI marked, anodised (an- odic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete Auditorium Nos 137.92 137.92 12.0 False None None False None False 1655.04 0 4081317 158838 None code192 Providing and fixing PTMT door catcher of length 72 mm and dia. of 42 mm with suitable washers weighing not less than 33 gms Auditorium Nos 58.35 58.35 6.0 False None None False None False 350.1 0 4081318 158838 None code193 Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : : 125x85x5.5 mm (heavy type) Auditorium Nos 291.75 291.75 12.0 False None None False None False 3501.0 0 4081319 158838 None code194 Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Fastener with threaded dia 12 mm Auditorium Nos 63.65 63.65 36.0 False None None False None False 2291.4 0 4081320 158838 None code195 Supplying and fixing new Honne wood beads wherever necessary including cost of materials, labour, complete as per specifications. Auditorium m 43.26 43.26 44.8 False None None False None False 1938.048 0 4081321 158838 None code196 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification. -do- 35 mm thick both side commercial Auditorium Sqm 3524.31 3524.31 19.2 False None None False None False 67666.752 0 4081322 158838 None code197 Providing & fixing of 2.5 track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 94mm width x 45mm height with reinforcement of 1mm thickness and Sash with overall size of 39mm x 58mm with GI reinforcement of 1.5mm and mesh sash of size 25mm x 42mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 5mm plain float glass, standard hardware& single point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 1819mm x 1819mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) Sqm 6949.96 6949.96 40.5 False None None False None False 281473.38 0 4081323 158838 None code198 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) Auditorium Sqm 6067.29 6067.29 1.08 False None None False None False 6552.6732 0 4081324 158838 None code199 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding Auditorium Kg 178.23 178.23 873.18 False None None False None False 155626.8714 0 4081325 158838 None code200 Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long brackets of 15x15mm M.S Square tube, the entire door frame to be reinforced with 19x19mm M.S Square tube of 19 gauge. The door frame to be fixed to the wall using M.S. Screws of 65/80mm size complete as per manufacturers specification & direction of Engineer-in-charge. Auditorium m 337.37 337.37 11.8 False None None False None False 3980.966 0 4081326 158838 None code201 Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Prelaminated PVC C Channel of 5mm thick sheet & 30x50mm wide to form stiles & 5mm thick & 75mm wide Prelaminated PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet Prelaminated on either side fitted in the M.S. frame, Sealed to the stiles & rails with PVC Designer beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75mm Aluminium hinges.- with one side prelam Auditorium Sqm 2164.24 2164.24 5.28 False None None False None False 11427.1872 0 4081327 158838 None code202 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. Auditorium Nos 1181.84 1181.84 8.0 False None None False None False 9454.72 0 4081328 158838 None code203 Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge... (Inside) Auditorium Sqm 331.0 331.0 234.33 False None None False None False 77563.23 0 4081329 158838 None code204 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. Auditorium Sqm 106.09 106.09 438.89 False None None False None False 46561.8401 0 4081330 158838 None code205 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.. ( Outside) Auditorium Sqm 370.25 370.25 801.78 False None None False None False 296859.045 0 4081331 158838 None code206 Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge: 10mm to 15 mm wide and 8 mm deep groove. Auditorium m 55.17 55.17 874.76 False None None False None False 48260.5092 0 4081332 158838 None code207 Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. ( length of mesh only be measured for payment Plaster mesh 200mm wide Auditorium m 45.32 45.32 1395.6 False None None False None False 63248.592 0 4081333 158838 None code208 Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 600x600 mm Auditorium Sqm 1246.56 1246.56 69.4 False None None False None False 86511.264 0 4081334 158838 None code209 Providing and laying flamed finish Granite stone ing in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : ** Flamed finish granite stone slab Black, Cherry Red, Brown, Cat Eye, River Pink or equivalent. Auditorium Sqm 2616.18 2616.18 152.88 False None None False None False 399961.5984 0 4081335 158838 None code210 Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU wa terproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6 kg/m2 to achieve final DFT (Dry Film Thickness) of 1mm including prime coat of epoxy primer @150 g/m2 and protection with 120gsm Geo-textile over the wa terproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification. Auditorium Sqm 866.76 866.76 502.2 False None None False None False 435286.872 0 4081336 158838 None code211 Providing and laying Ceramic glazed tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/m2 including pointing the joints with white cement and matching pigment etc., complete. Auditorium Sqm 943.14 943.14 37.2 False None None False None False 35084.808 0 4081337 158838 None code212 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. Auditorium Sqm 1537.24 1537.24 33.6 False None None False None False 51651.264 0 4081338 158838 None code213 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Auditorium Sqm 312.97 312.97 33.6 False None None False None False 10515.792 0 4081339 158838 None code214 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Auditorium Kg 599.41 599.41 255.05 False None None False None False 152879.5205 0 4081340 158838 None code215 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Auditorium Sqm 134.73 134.73 438.89 False None None False None False 59131.6497 0 4081341 158838 None code216 Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Auditorium Sqm 165.5 165.5 801.78 False None None False None False 132694.59 0 4081342 158838 None code217 Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Auditorium Sqm 53.05 53.05 41.58 False None None False None False 2205.819 0 4081343 158838 None code218 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Auditorium Sqm 122.0 122.0 41.58 False None None False None False 5072.76 0 4081344 158838 None code219 Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Auditorium Sqm 56.23 56.23 46.08 False None None False None False 2591.0784 0 4081345 158838 None code220 Polishing on wood work with ready mixed wax polish of approved brand and manufacture : New work to give an even surface including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Auditorium Sqm 143.22 143.22 46.08 False None None False None False 6599.5776 0 4081346 158838 None code221 Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Auditorium Kgs 119.88 119.88 1732.8 False None None False None False 207728.064 0 4081347 158838 None code222 Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished seamless type tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Auditorium Kgs 155.95 155.95 20070.0 False None None False None False 3129916.5 0 4081348 158838 None code223 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 g/m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 m or as desired by Engineer in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required Auditorium Sqm 602.59 602.59 22.2 False None None False None False 13377.498 0 4081349 158838 None code224 Providing,fabricating and fixing Profiled Poly Urethane insulated Roof(PUF Sheet) having modular density 40kg/m2 and size 1.06m width and 7.60m length sheets roof having external sheet of 0.5mm steel, bottom sheet of 0.40mm steel with powder coated finish. The precoated sheet shall be of minimum 240MPa steel conforming to IS 14246 : 1995 and shal have zinc coating with minimum 120gsm as per IS 277:1992,.The roofing system shall have suitable water proof over lapping arrangments and GRIHA ceritifed.The fasting shall be of self tapping screws of required length with PVC head along with washer pre-painted aluminium cap unit with build in seal arrangments.The entire roof shall be firmly fastened to the existng frame including all lead and lifts, loading & unloading ,usage charges of machinery and equipments, transportation charges,labour charges and all other incidental charges etc.,complete as per standard technical detailed specifications and as directed by the Engineer-in-Charge. 50mm thickness Auditorium Sqm 2753.04 2753.04 401.4 False None None False None False 1105070.256 0 4081350 158838 None code225 Providing and supplying 'Acoustical Wall Paneling' with square edges made of fibre glass substrate 25mm thick and wrapped on the front side with an acoustically transparent and classified for Fire reaction Class A, as per ASTM E-84, fabric with option of colors - as per the choice of the Architect/Engineer incharge of the size 600x600mm, 600x1200mm & 600x1800mm providing a minimum sound absorptionlevel of 0.85 NRC to be affixed to wall using Wall panel lmpaler sand construction adhesives as per the instructions laid down by the certified manufacturer Auditorium Kgs 6075.77 6075.77 204.96 False None None False None False 1245289.8192 0 4081351 158838 None code226 Providing & Fixing of Mineral Fibre Acoustical Suspended Ceiling System in module size of 600 x 600 x 16mm with Exposed Grid for Hospitals, Shopping malls, Commercial establishments and office complexes.The tiles should have Humidity Resistance (RH) of 99%, NRC 0.5, Light Reflectance LESS THANo87%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Colour White, Fire Performance UK Class 0 I Class 1 (BS 476 pt- 6 &7)and suitable for Green Building application with Recycled content of 30%.The tile shall be laid on 24 mm wide T - section flanges colour white having rotary stitching on all T sections i.e. the Main Runner, 1200 mm& 600 mm Cross Tees with a web height of 38mm and a load carryingcapacity of 15 kg/m2 &pull out strength of minimum 100 kg The T Sections should have a Galvanizing of 90 g/m2 and need to be installed with Suspension system Auditorium Kgs 2576.93 2576.93 535.68 False None None False None False 1380409.8624 0 4081352 158838 None code227 Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, including removal and disposal of top organic soil not exceeding 150 mm in thickness.By Mechanical Means using Dozer.A In area of light jungle ha 404.79 404.79 0.14 False None None False None False 56.6706 0 4081353 158838 None code228 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In all kinds of soils Depth upto 3 m Cum 105.06 105.06 28.34 False None None False None False 2977.4004 0 4081354 158838 None code229 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In ordinary/soft rock without blasting upto 1.5 m depth Cum 373.89 373.89 2.05 False None None False None False 766.4745 0 4081355 158838 None code230 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In ordinary/soft rock without blasting 1.5 to 3 m depth Cum 437.75 437.75 1.1 False None None False None False 481.525 0 4081356 158838 None code231 Loading and Unloading of Stone Boulder/Stone aggregates/ Sand/Kankar/Moorum. (Disposal of 10Km) Cum 122.57 122.57 50.0 False None None False None False 6128.5 0 4081357 158838 None code232 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. Cum 210.12 210.12 7.94 False None None False None False 1668.3528 0 4081358 158838 None code233 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (Rate including Formwork, Centering & Scaffolding and The cost of steel reinforcement shall be paid separately) Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates Cum 5720.62 5720.62 1.02 False None None False None False 5835.0324 0 4081359 158838 None code234 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 6651.04 6651.04 2.05 False None None False None False 13634.632 0 4081360 158838 None code235 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates sump tank-walls Cum 10469.23 10469.23 5.52 False None None False None False 57790.1496 0 4081361 158838 None code236 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cover slab Cum 9237.56 9237.56 2.05 False None None False None False 18936.998 0 4081362 158838 None code237 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, traightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Tonne 92140.71 92140.71 1.13 False None None False None False 104119.0023 0 4081363 158838 None code238 Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU wa terproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6 kg/m2 to achieve final DFT (Dry Film Thickness) of 1mm including prime coat of epoxy primer @150 g/m2 and protection with 120gsm Geo-textile over the wa terproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification. Sqm 841.51 841.51 27.14 False None None False None False 22838.5814 0 4081364 158838 None code239 Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 307.97 307.97 27.14 False None None False None False 8358.3058 0 4081365 158838 None code240 Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.. Sqm 282.22 282.22 5.52 False None None False None False 1557.8544 0 4081366 158838 None code241 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 92.7 92.7 21.62 False None None False None False 2004.174 0 4081367 158838 None code242 C. I Manhole covers with frame 610 * 455mm size (38kgs) Nos 2118.64 2118.64 2.0 False None None False None False 4237.28 0 4081368 158838 None code243 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. In all kinds of soils Depth upto 3 m Cum 105.06 105.06 69.19 False None None False None False 7269.1014 0 4081369 158838 None code244 Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5 m. Including cost of all labour complete as per specifications Cum 164.8 164.8 69.19 False None None False None False 11402.512 0 4081370 158838 None code245 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 Using 40 mm nominal size graded rushed coarse aggregates Rate including Formwork, Centering & Scaffolding and The cost of steel reinforcement shall be paid separately Cum 6168.67 6168.67 1.23 False None None False None False 7587.4641 0 4081371 158838 None code246 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20 mm nominal dia pipes m 390.37 390.37 380.0 False None None False None False 148340.6 0 4081372 158838 None code247 Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 100 mm nominal dia Pipes m 957.9 957.9 387.0 False None None False None False 370707.3 0 4081373 158838 None code248 Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 150 mm nominal dia Pipes m 1636.67 1636.67 111.0 False None None False None False 181670.37 0 4081374 158838 None code249 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid Each 6156.31 6156.31 30.0 False None None False None False 184689.3 0 4081375 158838 None code250 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required One urinal basin with 5 litre white P.V.C.Automatic flushing cistern Each 4587.62 4587.62 15.0 False None None False None False 68814.3 0 4081376 158838 None code251 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White itreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar tap Each 3174.46 3174.46 32.0 False None None False None False 101582.72 0 4081377 158838 None code252 Providing and fixing unplasticised PVC connection pipe with brass unions 20 mm nominal bore Mtr 93.73 93.73 48.0 False None None False None False 4499.04 0 4081378 158838 None code253 Providing and fixing 100 mm sand cast Iron grating for gully trap. Each 48.41 48.41 80.0 False None None False None False 3872.8 0 4081379 158838 None code254 Providing and fixing brass bib cock of approved quality : 15 mm nominal bore Each 215.27 215.27 40.0 False None None False None False 8610.8 0 4081380 158838 None code255 Providing and fixing brass stop cock of approved quality 15 mm nominal bore Each 307.97 307.97 23.0 False None None False None False 7083.31 0 4081381 158838 None code256 Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) : 25 mm nominal bore Each 565.47 565.47 25.0 False None None False None False 14136.75 0 4081382 158838 None code257 Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) : 32 mm nominal bore Each 615.94 615.94 20.0 False None None False None False 12318.8 0 4081383 158838 None code258 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc 20 mm nominal dia pipe Mtr 390.37 390.37 800.0 False None None False None False 312296.0 0 4081384 158838 None code259 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc 25 mm nominal dia pipe Mtr 491.31 491.31 400.0 False None None False None False 196524.0 0 4081385 158838 None code260 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc 32 mm nominal dia pipe Mtr 573.71 573.71 275.0 False None None False None False 157770.25 0 4081386 158838 None code261 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 40 mm nominal dia Pipes Mtr 491.31 491.31 207.0 False None None False None False 101701.17 0 4081387 158838 None code262 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 50 mm nominal dia Pipes Mtr 742.63 742.63 520.0 False None None False None False 386167.6 0 4081388 158838 None code263 Providing and constructing "WIRE CUT BRICK MACHINEHOLE CHAMBERS" using Portland/Pozzolana cement, conical in shape at top, with CC 1:3:6 foundation using 40mm and down size graded metal of approved quality and with an offset of 0.15M alround the chamber. 12.4 Construct Brick masonry in CM 1:4, 340 mm thick, with wirecut bricks of approved quality, plaster inside and out side with CM 1:3, 12mm thick, except for the conical surface outside where the plaster thickness shall be 20mm. Slope inside to be 1:6 in the concrete towards central drain and finished smooth. Fixing of pipes in CC 1:2:4 with graded metal of 20mm and down size. Providing and fixing SFRC Machinehole frame and cover (Heavy Duty) conforming to IS:12592 with latest amendment, in CC 1:2:4.Providing and fixing footsteps made of 12mm dia. steel bars (Fe-500) with 3mm thick plastic encapsulation (IS-10910). The footsteps shall be fixed 30cms apart and on CC block embeded to masonry wall. The whole works include watering, curing, barricading, danger lighting, pouring tar over MH frame and cover, cost of tar, shoring, strutting, de-watering, engraving Machinehole number with flow direction on the inner conical surface etc. as per the drawing etc. as per technical specifications and for the following diameters and depth etc. for 1.2mm Constructing Brick Masonry ircular Machinehole 1.2 m internal dia. ,1.0 M depth & SFRC cover & frame Nos 29918.41 29918.41 2.0 False None None False None False 59836.82 0 4081389 158838 None code264 Providing and constructing "WIRE CUT BRICK MACHINEHOLE CHAMBERS" using Portland/Pozzolana cement, conical in shape at top, with CC 1:3:6 foundation using 40mm and down size graded metal of approved quality and with an offset of 0.15M alround the chamber. 12.4 Construct Brick masonry in CM 1:4, 340 mm thick, with wirecut bricks of approved quality, plaster inside and out side with CM 1:3, 12mm thick, except for the conical surface outside where the plaster thickness shall be 20mm. Slope inside to be 1:6 in the concrete towards central drain and finished smooth. Fixing of pipes in CC 1:2:4 with graded metal of 20mm and down size. Providing and fixing SFRC Machinehole frame and cover (Heavy Duty) conforming to IS:12592 with latest amendment, in CC 1:2:4. Providing and fixing footsteps made of 12mm dia. steel bars (Fe-500) with 3mm thick plastic encapsulation (IS-10910). The footsteps shall be fixed 30cms apart and on CC block embeded to masonry wall. The whole works include watering, curing, barricading, danger lighting, pouring tar over MH frame and cover, cost of tar, shoring, strutting, de-watering, engraving Machinehole number with flow direction on the inner conical surface etc. as per the drawing etc. as per technical specifications and for the following diameters and depth etc. for 1.2mm Constructing Brick MasonryCircular Machinehole 1.2 m internal dia. , 1.1 M depth & SFRC cover & frame Nos 30416.93 30416.93 2.0 False None None False None False 60833.86 0 4081390 158838 None code265 Providing and constructing "WIRE CUT BRICK MACHINEHOLE CHAMBERS" using Portland/Pozzolana cement, conical in shape at top, with CC 1:3:6 foundation using 40mm and down size graded metal of approved quality and with an offset of 0.15M alround the chamber. 12.4 Construct Brick masonry in CM 1:4, 340 mm thick, with wirecut bricks of approved quality, plaster inside and out side with CM 1:3, 12mm thick, except for the conical surface outside where the plaster thickness shall be 20mm. Slope inside to be 1:6 in the concrete towards central drain and finished smooth. Fixing of pipes in CC 1:2:4 with graded metal of 20mm and down size. Providing and fixing SFRC Machinehole frame and cover(Heavy Duty) conforming to IS:12592 with latest amendment, in CC 1:2:4. Providing and fixing footsteps made of 12mm dia. steel bars (Fe-500) with 3mm thick plastic encapsulation (IS-10910). The footsteps shall be fixed 30cms apart and on CC block embeded to masonry wall. The whole works include watering, curing, barricading, danger lighting, pouring tar over MH frame and cover, cost of tar, shoring, strutting, de-watering, engraving Machinehole number with flow direction on the inner conical surface etc. as per the drawing etc. as per technical specifications and for the following diameters and depth etc. for 1.2mm Constructing Brick Masonry ircular Machinehole 1.5 m internal dia. & 1.0 M depth includ. SFRC F& Nos 40830.23 40830.23 2.0 False None None False None False 81660.46 0 4081391 158838 None code266 Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc complete as per standard design: Inside dimensions 455x610 mm and 45 cm deep for single pipe line : With common burnt clay (non modular) bricks of class designation 3.5 Nos 5811.26 5811.26 24.0 False None None False None False 139470.24 0 4081392 158838 None code267 Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 500X700 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: Inside dimensions 500x700 mm and 45 cm deep for pipe line with one or two inlets :With common burnt clay (non modular) bricks of class designation 3.5 Nos 6466.34 6466.34 16.0 False None None False None False 103461.44 0 4081393 158838 None code268 Providing and fixing gun metal non- return valve of approved quality (screwed end) 32 mm nominal bore Horizontal Nos 833.27 833.27 1.0 False None None False None False 833.27 0 4081394 158838 None code269 Providing and fixing PVC (S.W.R) Gully Trap 10cms x 10cms with all fitting arrangements & all necessary accessories complete Nos 356.38 356.38 3.0 False None None False None False 1069.14 0 4081395 158838 None code270 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. Nos 9.27 9.27 12000.0 False None None False None False 111240.0 0 4081396 158838 None code271 Water purification plants: Providing, Installation and Commissioning of automatic Water purification plant (RO+UF) with all accessories piping, product water tank on single phase power supply as per the enclosed detailed Technical Specifications including cost of material, loading and unloading and as directed by the Engineer in charge. (Ref- detailed specification enclosed seperatly). Note:- 1.The above rates mentioned are only for the preparation of estimate purpose. 2. All items are to be of BSI /NFS standards,with BSI / NFS mark . 3. Tenders to be invited for procurement. 4. No direct payment should be made under any situation or condition or on any account. 5. After commissioning of plant necessary testing to be done for the satisfactory of Engineer Incharge. Note : Refer the ANNEXURE : F for Detailed Specification of Each For 500 LPH SS : Skid type Nos 336810.0 336810.0 1.0 False None None False None False 336810.0 0 4081397 158838 None code272 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. In all kinds of soils Depth upto 3 m Cum 105.06 105.06 24.0 False None None False None False 2521.44 0 4081398 158838 None code273 Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. Cum 1052.1 1052.1 8.0 False None None False None False 8416.8 0 4081399 158838 None code274 Supplying, filling, spreading &leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer in-charge Cum 1245.3 1245.3 8.0 False None None False None False 9962.4 0 4081400 158838 None code275 Supplying, filling, spreading &leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -in-charge Cum 1251.6 1251.6 8.0 False None None False None False 10012.8 0 4081401 158838 None code276 Providing and fixing factory made precast RCC perforated drain covers, having concrete of strength not less than M-25, of size 1000 x 450x50 mm, reinforced with 8 mm dia four nos longitudinal & 9 nos cross sectional T.M.T. hoop bars, including providing 50 mm dia perforations @ 100 to 125 mm c/c, including providing edge binding with M.S. flats of size 50 mm x 1.6 mm complete, all as per direction of Engineer-in-charge No 1179.15 1179.15 6.0 False None None False None False 7074.9 0 4081402 158838 None code277 Design, supplying, erecting testing and commissioning of - passenger/ Bed-cum-passenger hospital lift with speed of 1mtr per second, variable voltage variable frequency drive, with or without machine room for the available well size, operating at 415 V3 phase 50 cycles AC supply, powder coated / Stainless Steel car entrance doors enclosures with suitable colour vinyl flooring, LED car illumination, emergency light, intercom and fan as desired by the user, central opening / side opening door with or without attendant operation, 7 segment display buttons, call register indicator, fireman drive, SS handrails inside car, full length infrared curtain in car door, automatic rescue device with batteries, voice announcing in regional / international languages, Braille buttons with one year warranty and maintenance with necessary scaffolding and minor civil works like fixing of guide rail, counter weight etc., Page No. 1, SI. No.14 Part-II 14.4 Without Machine Room-SS Finish 14.4.4 - 13 Passengers No 1472056.69 1472056.69 1.0 False None None False None False 1472056.69 0 4081403 158838 None code278 Providing 4kg Fire Extinguisher Mono Ammonium Phosphate Powder 50, Stored Pressure Type, Pressure Gauge, Gross Weight 6.9 Kg, empty weight 2.9 Kg, Can Height 440MM, Diameter 140MM, Discharge Time less than 13 Sees, Controllable discharge mechanism (Squeeze grip with easy snap safety seal), Range minimum 4 meters, applicable on Class A,8, C and electrically started Fire, A Rating 2A, 8 Rating 218, Can construction : Deep drawn & Co., Mig welded, valve Construciton : Forging and Mechining, Internal Coating of Can: Epoxy powder coating, External Coating of Can: Epoxy Polyster power coating, Sheet metal thickness: 1.60MM, 5 years Warranty with instalert system with Superior quality EPDM Rubber Hosepipe etc., including cost of materials, labour, usage charges of machinery complete as per specifications. complete IS 15683, CE Approved. Make- ANDEX/CEASEFIRE/MINIMAX - Page No. 1, SI. No.15.3 Part-III Nos 4931.64 4931.64 10.0 False None None False None False 49316.4 0 4081404 158838 None code279 Supply and installation in position, testing and commissioning 6kg Fir e Ex tinguisher Mono Ammonium Phos phate Powder 50, Stored Pressure Type, Pressure Gauge, Gross Weight 9.5 Kg, empty weight 3.5 Kg, Can Height 435MM, Diameter 160MM, Discharge Time less than 9 Sees, Controllable discharge mechanism (Squeeze grip with easy snap safety seal), Range minimum 4 meters, applicable on Class A,8,C and electrically started Fire, A Rating 3A, 8 Rating 218, Can construction : Deep drawn & Co., Mig welded, valve Construciton : Forging and Mechining, Internal Coating of Can: Epoxy powder coating, External Coating of Can: Epoxy PoIyster power coating, Sheet metal thickness: 1.60MM, 5 years Warranty with instalert system with Superior quality EPDM Rubber Hosepipe etc., including cost cost of supporting materials like MS stand & accessaries if it is fixing n floor / MS brackets & accessories if it is fixing on wall,,, labour, usage charges of machinery complete as per specificed.with regards to general guidelines of fire saf -Providing ABC Powder based MAP 50, 9Kg Page No. 1, SI. No.15.3 Part-III Nos 2935.5 2935.5 5.0 False None None False None False 14677.5 0 4081405 158838 None code280 Supply and installation of 9kg Fire Extinguisher Mono Ammonium Phosphate Powder 50, Stored Pressure Type, Pressure Gauge, Gross Weight 14.90 Kg, empty weight 5.90 Kg, Can Height 615MM, Diameter 175M M, Discharge Time less than 13Secs, Controllable discharge mechanism (Squeeze grip with easy snap safety seal), Range minimum 4 meters, applicable on Class A,8, C and electrically started Fire, A Rating 4A, 8 Rating 348, Can construction : Deep drawn & Co., Mig welded, valve Construciton : Forging and Mechining, Internal Coating of Can: Epoxy powder coating, External Coating of Can: Epoxy Polyster power coating, Sheet metal thickness: 2.00MM, 5 years Warrantywith instalert system with Superior quality EPDM Rubber Hosepipe etc.,including including cost of supporting materials like MS stand & accessriesif it is fixing n floor / MS brackets & accessories if it is fixing onwall,including cost of supporting materials like MS stand & accessariesif ited.with regards to general guidelines of fire safety rated doors,MRLL beams, pressure switch, manual change over for doors duringemergency, ARD of 10 times with sufficie Providing ABC Powder based AP 90, 2K Page No. 1, SI. No.15.3 Part-III Nos 3347.5 3347.5 5.0 False None None False None False 16737.5 0 4081406 158838 None code281 Stage - Hardwood Flooring Flooring (including beechwood polish. skirting): Providing and fixing 16/4x100x1200mm planks, 6 layers per PU, tongue and groove and micro bevel all around, finger jointed, laid using full-surface ghing with suitable parquet glue. Cement sub floor should be hard plaster, tight, very smooth on surface, level & completely dry (cured). The risers will be smoothened with a 1 mm Ardex Feather Edge Covering while the step areas will be done with 3 mm Self leveling as per detailed Architectural Drawing including all lead and lifts, at all levels and as per the directions of the Engineer in Charge. (Stage) - Non SR Sqm 7627.12 7627.12 60.0 False None None False None False 457627.2 0 4081407 158838 None code282 Carpet Flooring: 100% solution dyed tufted solid cut pile in wool/Nylon with action Backing, Guage 1/10, 8.00 mm thickness in 36oz per sq yard with of 12 feet, Soil Resistance 8 of 10 Passed. As per the directions of the Engineer in Charge. ( Non SR) (Auditorium Seating) Sqm 4661.02 4661.02 200.0 False None None False None False 932204.0 0 4081408 158838 None code283 Theatre Chairs: High back design with headrest Gives maximum contact as well as creates a desirable space which reflects the image / position of the user. Injection Molded Seat and back Cover - Adds to the aesthetics and life of the chair. Auto Tip-Up Allows for better aisle space utilization in an auditorium Benefit Operational ease for the user. Upholstery Foam laminated stretchable fire retardant fabric. SEATREST ASSEMBLY: The seat-rest assembly is made up of 1.5 cm thk. Marine plywood upholstered with fabric and moulded polyurethane foam with Injection moulded seat cover. The seat is auto tip-up type and folds when not in use. SEAT SIZE: 45.0cm. (W) X 48.5cm. (D) X 14.5cm. (T) Approx. BACKREST ASSEMBLY: The backrest assembly is made up of a 1.2cm thk. Marine plywood upholstered with fabric and moulded polyurethane foam with injection moulded back cover. The back foam is designed with contoured lumbar support for extra comfort. BACK SIZE: 47.5cm. (W) X 80.0cm. (H) X 12.5cm. (T) Approx. POLYURETHANE FOAM: The polyurethane foam is moulded with density = 48+/-2kgs./m3. LEG FRAME ASSEMBLY: The leg frame assy. is fabricated from M.S. tube 6 cm x 4 cm x 14bg(2.0mm) thick. Welded with grouting member. It is black powder coated & grouted to the floor using foundation expansion bolts. P.U. ARMREST: The armrest is made up of black integral skin Polyurethane with 70-80 shore A’ hardness and reinforced with M.S. insert fixed with leg frame. The armrests are scratch and weather resistant. Flat surface armrest is standard offering; armrest with cup-holder is available as an option. ARMREST CLADDING: The armrest cladding is made up of 9 mm particle board & upholstered with fabric. POWDER COATING: All steel components are Epoxy Polyester Powder Coated. As per the directions of the Engineer in Charge. (Auditorium seating) Nos 10169.49 10169.49 288.0 False None None False None False 2928813.12 0 4081409 158838 None code284 Supply, Installation, Testing & Commissioning of Wall Mount speaker complete with all standard accessories as per the tender specification. Frequency Response (+/- 3dB) : 48Hz-22KHz or better Nominal Dispersion : 90 x 70 or better Long Term Power Handling : 300 W or better Impedance : 8 ohm or better Sensitivity (SPL / W @ 1 Mtr) : 98 dB SPL or better Max SPL @ 1 Mtr (Cont.) : 127 dB or better Transducers : LF : 12" or better & HF : 1 x 1" or better Approved brands : Bose/RCF/Apart Nos 6377.12 6377.12 2.0 False None None False None False 12754.24 0 4081410 158838 None code285 Providing, supplying and fixing of 12" 2-Way Passive Loudspeaker, 350 W Continuous, Coverage: 90Ex 60E Make : EV/JBL Or Equalent approved by Engg incharge ---- ---- etc complete with all lead and lift as per detailed specification and directions of the Engineer incharge.(Non SR item) Nos 54000.0 54000.0 2.0 False None None False None False 108000.0 0 4081411 158838 None code286 12 channel Mixing Console Supply, Installation, Testing & Commissioning of 12 channel Analog Mixing Consolecomplete with all standard accessories as per the tender specification. Nos 55084.75 55084.75 1.0 False None None False None False 55084.75 0 4081412 158838 None code287 Stage Monitors: SITC of a self powered 12" full range speaker with a built in 1000W RMS amplifier. The backside of the speaker to contain a LCD display and 1-knob DSP control with presets for precise and speedy setup. Coverage angle of the speaker to be 90 deg X 60 Deg, integrated top handle as well as pole mount facility. Must also be able to be used as a stage/floor monitor. Speaker to contain 2) XLR/TRS Combo Jack, (1) 3.5 mm Input, and (1) XLR link Output. Speaker to generate a max SPL of 125 dB or more. Nos 71380.51 71380.51 4.0 False None None False None False 285522.04 0 4081413 158838 None code288 Supplying of…TR split Air conditioners suitable for operation on A/C supply single phase 50 Hz 230 Volts with hermetically sealed compressor with air cooled condenser, motor capacitor and start run capacitors, relay and over load protector internal unit, with one indoor and one outdoor unit. The condenser unit will be placed outside the room on the terrace to avoid noise including standard length of suitable size copper tubing covered with insulation tube.(High wall chorded/cordless) suitable capacity 3 core sheathed/ PVC copper cable and a battery operated wireless remote unit. 5star - 1.5 ton capacity . ( Pg no:23 Item no:6.7.1) Nos 49113.49 49113.49 4.0 False None None False None False 196453.96 0 4081414 158838 None code289 Supplying of ..TR split Air Conditioners suitable for operation on A/C supply single phase 50 Hz 230 Volts with hermetically sealed compressor with air cooled condenser, motor capacitor and start run capacitors, relay and over load protector internal unit, withj one indoor and one outdoor unit. The condenser unit will be placed outside the room on the terrace to avoid noise including standard lenght of suitable size copper tubing covered with insulation tube. (High wall chorded/chordless) suitable capacity 3 core sheethed/PVC copper cable and a battery operated wirelss remote unit.(78/9.6) 5star - 2.0 ton capacity . ( Pg no:23 Item no:6.7.2) Nos 55669.44 55669.44 2.0 False None None False None False 111338.88 0 4081415 158838 None code290 Installation charges for split type air conditioner with allied works for one indoor and one outdoor unit is to be mounted on suitable Angle Iron support upto 3.0 Ton split/cassette type A/C. ( Pg no:24 Item no:6.12 Each 2761.43 2761.43 5.0 False None None False None False 13807.15 0 4081416 158838 None code291 Extra for Fabrication supply and fixing of Stand fabricated using slotted angle /L angle of size 6mm x 50mm for mounting out door/indoor A.C. unit/ Batteries. ( Pg no:25 Item no:6.22) Each 4951.21 4951.21 5.0 False None None False None False 24756.05 0 4081417 158838 None code292 Supplying & filling refrigerant (F-22/F/12) for air conditioning equipment's. Which includes the labour & Nitrogen gas for pressure and leak testing. ( Pg no:25 Item no:6.19) Kg 623.15 623.15 30.0 False None None False None False 18694.5 0 4081418 158838 None code293 Supply, installation of 5/8" and 7/8" Hard drawn refrigerant pipe and insulation suitable for 11TR duct able split Air- Conditioner.( Pg no:25 Item no:6.24) m 2301.02 2301.02 90.0 False None None False None False 207091.8 0 4081419 158838 None code294 Supplying, errection, testing and commis-sioning of voltage stabilizer suitable for 170 to 270 v in put and load variation from no load to full load, with over load protection, spike suppression, operating at 00 C.To 400 C. Range etc., complete. 3KVA Capacity...( Pg no:29 Item no:9.1.1) Each 4114.85 4114.85 3.0 False None None False None False 12344.55 0 4081420 158838 None code295 Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming to IS 15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00 mtr spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement & the cost of cutting chases & making good the same including testing of joints complete. (Concealed work including cutting chases and good the walls etc.) - 20mm nominal OD pipes. (P.No.96, I.No. 13.86.2 of PWD SR 20116-17) Mtr 246.89 246.89 60.0 False None None False None False 14813.4 0 4081421 158838 None code296 Supply erection, testing, commissioning of Cassette type split Air conditioners suitable for operation on single/three phase AC supply, hermetically sealed compressor with air cooled condenser motor capacitor start, capacitors run relay and over load protection, one ceiling mounted indoor unit and one outdoor condenser unit including standard accessories covered with insulation tube including battery operated cordless unit 4.0 TR Cassette 3 Ph Nos 123827.63 123827.63 1.0 False None None False None False 123827.63 0 4081422 158838 None code297 Supplying and installation of insulated refrigerant copper tubing of 5/8 and 3/8 with polythene foam insulation 3 core 80 stand copper wiring between indoor and outdoor unit. Leak testing oil and gas charging for additional piping length of tube- item no- 7.13 Cassette Mtr 1688.17 1688.17 22.0 False None None False None False 37139.74 0 4081423 158838 None code298 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 50 mm nominal dia Pipes Mtr 742.63 742.63 90.0 False None None False None False 66836.7 0 4081424 158838 None code299 Supply and installation of necessary refnet-joints( & Cassette Units) Nos 7850.0 7850.0 2.0 False None None False None False 15700.0 0 4081425 158838 None code300 Supply & Laying of Copper Armourded/Unarmoured type electrical power and communication cabling between the indoor unit to outdoor unit 2Cx1.5 Sqmm Unarmoured Shielded Cable PVC Conduit m 380.0 380.0 66.0 False None None False None False 25080.0 0 4081426 158838 None code301 Supply & Laying of Copper Armourded/Unarmoured type electrical power and communication cabling between the indoor unit to outdoor unit 3Cx2.5 Sqmm Unarmoured m 450.0 450.0 10.0 False None None False None False 4500.0 0 4081427 158838 None code302 Supply & Laying of G.I Cable Tray for Copper piping with cover 150mm width m 1322.0 1322.0 40.0 False None None False None False 52880.0 0 4081428 158838 None code303 2 Meter HDMI Cable Supply & Laying of 2 Meter HDMI Cable complete with all standard accessories as per the tender specification. Type :28 AWG or better Support:4096x2160 or 3840x2160 50/60Hz at 4:4:4 or better with HDR10, HDCP 2.2, Ethernet. Bandwidth:18 Gbps or better Deep ColorSupport: Up to UHD/4K 24/25/30Hz 4:4:4/12 bits or50/60Hz 4:2:0/12 bit Connector type: HDMI Male/Male, ARC - VW1 UL Rated Approved brands: Extron/AMX/Crestron No 7733.05 7733.05 6.0 False None None False None False 46398.3 0 4081429 158838 None code304 10 Meter HDMI Cable Supply & Laying of 10 Meter HDMI Cable complete with all standard accessories as per the tender specification. Type:28 AWG or better Support: 4096x2160 or 3840x2160 50/60Hz at 4:4:4 or better with HDR10, HDCP 2.2, Ethernet, Bandwidth:18 Gbps or better Deep Color Support: Up to UHD/4K 24/25/30Hz 4:4:4/12 bits or 50/60Hz 4:2:0/12 bit Connector type: HDMI Male/Male, ARC - VW1 UL Rated Approved brands: Extron/AMX/Crestron Nos 13347.46 13347.46 7.0 False None None False None False 93432.22 0 4081430 158838 None code305 Display Mount Supply, Installation, Testing &Commissioning of Display Mount complete with all standard accessories as per the tender specification. Approved brands: Custom Nos 12728.81 12728.81 2.0 False None None False None False 25457.62 0 4081431 158838 None code306 Professional Display Type 2 Providing and Installing LED 75” TV Nos 241525.42 241525.42 2.0 False None None False None False 483050.84 0 4081432 158838 None code307 Supplying Installation , testing & Commissioning of POP UP BOX-COLOUR-BLACK MODULES -2 POWER+2 DATA+1HDMI+1VGA+1 3.5MM STEREO+1 USB - TA-MP1 Low profile design with tilt up lid Button to open hyraulic lid Completely flat top when closed Architecturally streamlined and economical connectivity solution Flush mountable into a table or flat surface Convenient access to cable connections Does not allow seepage of water Popular choice for offices, conference room , class room , seminar room , home theater and auditorium requirements Conceals all the cables on the table/ floor has all the above ports available by pressing one button complete the rate includes cost of all materials, labour charges, complete as per specification Nos 20762.71 20762.71 2.0 False None None False None False 41525.42 0 4081433 158838 None code308 Supplying Installation , testing & Commissioning of HDMI SWITCHER-5:1 4K-2.0 HDMI TA AP13C 4K ULTRA HD 5-IN/1-OUT-This HDMI Switch Connects up to 5 UHD HDMI sources (gaming console, DVD player, laptop, blue ray etc.) to 1 Ultra HDTV. It Support HDCP 2.2, 4K 60HZ 4:4:4 Full HD, UHD, Deep Color to 36bit.,also backward compatible with Full HD 1080P devices. High Resolution Supports 4K resolution / 60 Hz (4: 4: 4) signal, HDR video source also switched. 4K/2K (maximum 4096 X 2160), corresponding to input and output of 60 Hz video. No more distorted sound and video transmissions. Back compatible with 4K@30HZ and 1080P.HDMI pass through switch supports HDCP 2.2 and also supports HDCP 1.4 too. Intelligent Auto-switch Automatic switching of ports when the equipment is turned on. When the power of the HDMI equipment turns on, the automatic switching function which the selected port automatically switches is adopted. An AC adapter is attached to this product. and it jump over to the next active input source automatically when the current one is powered off. The HDMI Switcher automatically switches to the last selected source input when restart. Wide Compatibility This HDMI switch works with all HDMI-integrated devices, this HDMI switch box can connect the computer, Blu-ray player, DVD player, AV receiver, Apple TV, Roku streaming media player, TV Box, Play Station 3/4, box One/360, Nintendo Wii, or other HDMI compatible devices to your Ultra 4K TV (UHD TV), HDTV, monitor, display or projector with a big screen. TECHNICAL SUPPORT AVAILABLE We are manufactory which Specialized in HDMI solutions for years,If you have any issue with this products, please feel free to let us know and we will try our best to resolve. complete the rate includes cost of all materials, labour charges, complete as per specification Nos 32076.27 32076.27 2.0 False None None False None False 64152.54 0 4081434 158838 None code309 Supplying Installation , testing & Commissioning of USB HUB-3.0 7 PORT HUB - TA-AP76B Compact palm-sized grip (4.3 1.7 0.9in) and lightweight design (2.9oz). Easily add 7 USB 3.0 SuperSpeed ports to your PC and enjoy data transfer rates of up to 5Gbps for faster sync times. Backward compatible with USB 2.0 / 1.1. 7th data port also delivers BC 1.2 charging speeds of up to 2 amps, while the other 6 ports charge at speeds of up to 0.9A each, with 6 amps overall among 7 ports. High-grade chipset and 36 watt adapter guarantee steady operation. Supports plug-and-play and hot-swapping. No installation of drivers required for Windows XP / Vista / 7 / 8 / 10 or Mac OS X 10.2 and complete the rate includes cost of all materials, labour charges, complete as per specification Nos 20974.58 20974.58 2.0 False None None False None False 41949.16 0 4081435 158838 None code310 Supplying Installation , testing & Commissioning of USB 3.0 ACTIVE EXTENSION CABLE WITH POWER AM-AF 5 meter - ta-mc30a usb active extension cable version 3.0 v .stable connectivity . speed : 5 gbps with power adapter . daisy chainable usb type a male to a female - power adapter at female side . supports pen drive ,camera , printer , keyboard , mouse , white board , projector , display , hard drive , scanner complete the rate includes cost of all materials, labour charges, complete as per specification Nos 5953.39 5953.39 2.0 False None None False None False 11906.78 0 4081436 158838 None code311 Supplying Installation , testing & Commissioning Logitech Rally expansion Mic Pickup range: 15 ft / 4.5m diameter Four microphones with eight beamforming elements Mute button with LED status indicator Captive cable: 9.6 ft (2.95m) Daisy chain up to 7 Rally Mic Pods Recommended participants: Rally (one Mic Pod) complete. the rate includes cost of all materials, labour charges, complete as per specification Nos 38983.05 38983.05 2.0 False None None False None False 77966.1 0 4081437 158838 None code312 Supplying Installation , testing & Commissioning Logitech Rally Splitter/Mic Pod: Rally Mic Pod Hubs work with Logitech Rally systems, and are not compatible with the standalone USB Rally Camera. Three 12-pin connections for any combination of Rally Mic Pods or additional Rally Mic Pod Hubs Under-table mounting hardware Height x Width x Depth: 16 mm x 102 mm x 102 mm complete. the rate includes cost of all materials, labour charges, complete as per specification Nos 35593.22 35593.22 2.0 False None None False None False 71186.44 0 4081438 158838 None code313 Supplying Installation , testing & Commissioning Rally Mounting Kit - Invertible camera bracket supports wall mounting and near-ceiling installation Cable retainers for Table Hub and Display Hub keeps cables plugged in Ventilated brackets secure Hubs under the table or to the wall Low-profile speaker brackets for a floating appearance complete.the rate includes cost of all materials, labour charges, complete as per specification Nos 21186.44 21186.44 2.0 False None None False None False 42372.88 0 4081439 158838 None code314 SITC of Workstation series CPU: Processors Intel 5600 series processors up to six cores with up to 6.4GT/s(Intel quick path interconnect) and up to 12 MB shared cache. Turbo boost mode on select processors. All processors are 64-bit, support intel DBS and Intel VT. Note: Intel TXT is not supported. Turbo mode and hyper threading technology on select processors operating systems. Genuine windows 7 ultimate 32-bit Genuine windows 7 ultimate 64-bit Genuine windows vista ultimate SPI 32-bit; genuine windows vista ultimate SPI 64-bit; Genuine windows vista business SPI 64-bit Red har enterprise linux WS v.5.3 EM64T chipset intel X58 Memory up to 24GB4 1333MHz ECC and non-ECC memory in 6DIMM Slots flash BIOS BIOS 8MB Flash memory for system BIOS; SMBIOS 2.5Support graphics2 support for 2PCI Express x16 Gen 2 graphics cards up to 150W 2 to 8 monitor configurations depending on card(s) chosen. High end 3-d midrange 3D Entry 3D professional 2D (not certified) NVIDIA Quadro 5000 AMD Firepro v7900 ATI Firepro V4800 ATI FireMV V2260 NVIDIA Quadro 4000 ATI Firepro v7800 NVIDIA Quadro 600 NVIDIA Quadro NVS 420AMD Firepro V5900 NVIDIA Quadro NVS 295 ATI Firepro v5800 NVIDIA Quadro 2000 hard drives5 chassis supports up to 4 internal SATA drives (8TB Storage max)/3 SAS Drives SATA 3.0GB/s 7200RPM SATA 3.0GB/s 10K RPM SAS 15K RPM SSD Up to 2.0 TB6 with 8MB DATABURST cache up to 600 GB6 With 16MB databurst cache up to 600GB6 256gb5 communications network controller. Integrated Broadcom 5761 gigabit Ethernet controller with remote wake up and pxe support modem :optional dell 56k v.92 data/fax PCI Modem audio controller integrated high definition audio, 24-bit analog to digital;24-bit digital to analog stereo Nos 79661.02 79661.02 2.0 False None None False None False 159322.04 0 4081440 158838 None code315 Supplying and wiring adopting loop system in existing pvc conduit/casing caping using 1100v grade,COPPER conducter flexible multistrand FRLS PVC insulated,2x1.5Sq.mm Cable confirming to the GTP without switch,the other end of the wire shall be terminated with sufficient loose length in a wood/PVC round block complete for each outlet. 2.2.1)Short point upto 3Mtr from tapping point to out let via switch box No 269.0 269.0 18.0 False None None False None False 4842.0 0 4081441 158838 None code316 Supplying and wiring adopting loop system in existing pvc conduit/casing caping using 1100v grade,COPPER conducter flexible multistrand FRLS PVC insulated,2x1.5Sq.mm Cable confirming to the GTP without switch,the other end of the wire shall be terminated with sufficient loose length in a wood/PVC round block complete for each outlet. 2.2.2)Medium point above 3Mtr upto 6Mtr from tapping point to out let via switch box No 379.0 379.0 15.0 False None None False None False 5685.0 0 4081442 158838 None code317 Supplying and wiring adopting loop system in existing pvc conduit/casing caping using 1100v grade,COPPER conducter flexible multistrand FRLS PVC insulated,2x1.5Sq.mm Cable confirming to the GTP without switch,the other end of the wire shall be terminated with sufficient loose length in a wood/PVC round block complete for each outlet. 2.2.3)Long point above 6Mtr upto 10Mtr from tapping point to out let via switch box No 555.0 555.0 25.0 False None None False None False 13875.0 0 4081443 158838 None code318 Supplying and wiring adopting loop system in existing pvc conduit/casing caping using 1100v grade,COPPER conducter flexible multistrand FRLS PVC insulated,2x1.5Sq.mm Cable confirming to the GTP without switch,the other end of the wire shall be terminated with sufficient loose length in a wood/PVC round block complete for each outlet. 2.2.4)Two outlet in a row,above 3Mtr upto 6Mtr from tapping point to out let via switches No 677.0 677.0 55.0 False None None False None False 37235.0 0 4081444 158838 None code319 Supplying and wiring adopting loop system in existing pvc conduit/casing caping using 1100v grade,COPPER conducter flexible multistrand FRLS PVC insulated,2x1.5Sq.mm Cable confirming to the GTP without switch,the other end of the wire shall be terminated with sufficient loose length in a wood/PVC round block complete for each outlet. 2.2.5)Three outlet in a row, above 6Mts upto 10Mtr from tapping point to out let via switches box No 989.0 989.0 105.0 False None None False None False 103845.0 0 4081445 158838 None code320 Supplying and flush mounting powder coated metal box suitable for mounting modular switch plates.The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 3.4.1) 1-2Way Each 138.0 138.0 115.0 False None None False None False 15870.0 0 4081446 158838 None code321 Supplying and flush mounting powder coated metal box suitable for mounting modular switch plates.The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 3.4.2) 3Way Each 159.0 159.0 55.0 False None None False None False 8745.0 0 4081447 158838 None code322 Supplying and flush mounting powder coated metal box suitable for mounting modular switch plates.The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 3.4.3)4-5Way Each 177.0 177.0 14.0 False None None False None False 2478.0 0 4081448 158838 None code323 Supplying and flush mounting powder coated metal box suitable for mounting modular switch plates.The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 3.4.4)6 Way Each 220.0 220.0 19.0 False None None False None False 4180.0 0 4081449 158838 None code324 Supplying and flush mounting powder coated metal box suitable for mounting modular switch plates.The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 3.4.5)8Way Each 261.0 261.0 25.0 False None None False None False 6525.0 0 4081450 158838 None code325 Supplying and flush mounting powder coated metal box suitable for mounting modular switch plates.The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 3.4.6)10-12Way Each 319.0 319.0 17.0 False None None False None False 5423.0 0 4081451 158838 None code326 Supplying and flush mounting powder coated metal box suitable for mounting modular switch plates.The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 3.4.6)16Way Each 363.0 363.0 15.0 False None None False None False 5445.0 0 4081452 158838 None code327 Suppling and fixing PVC/metal conduit deep juction boxes 1.5.1)19/20mm deep juction box Each 49.0 49.0 230.0 False None None False None False 11270.0 0 4081453 158838 None code328 Suppling and fixing PVC/metal conduit deep juction boxes 1.5.2) 25mm deep juction box Each 56.0 56.0 310.0 False None None False None False 17360.0 0 4081454 158838 None code329 Suppling and fixing PVC/metal conduit deep juction boxes 1.5.3) 32mm deep juction box Each 61.0 61.0 15.0 False None None False None False 915.0 0 4081455 158838 None code330 Suppling and fixing PVC/metal conduit deep juction boxes 1.13)Suplay and fixing Metal Fan Box with Round Hook Each 117.0 117.0 82.0 False None None False None False 9594.0 0 4081456 158838 None code331 Supplying and mounting 2 nos of 2 way 6amps flush type switches either surface /flush mounted on exisinting gang box or in 4mm thick plastic sheet and mounted on a flush mounted wooden box and wiring as required Each 170.0 170.0 10.0 False None None False None False 1700.0 0 4081457 158838 None code332 Supplying and fixing superior gality modular switch mounting polycorbonate plate with neceaary supporting back plate with rquired nos. of machine screwes, bolts nuts etc., complete on the existing metal/PVC box. 3.5.1) 1 to 2 Module Each 137.0 137.0 115.0 False None None False None False 15755.0 0 4081458 158838 None code333 Supplying and fixing superior gality modular switch mounting polycorbonate plate with neceaary supporting back plate with rquired nos. of machine screwes, bolts nuts etc., complete on the existing metal/PVC box. 3.5.1) 3 Module Each 161.0 161.0 55.0 False None None False None False 8855.0 0 4081459 158838 None code334 Supplying and fixing superior gality modular switch mounting polycorbonate plate with neceaary supporting back plate with rquired nos. of machine screwes, bolts nuts etc., complete on the existing metal/PVC box. 3.5.2) 4 Module Each 175.0 175.0 14.0 False None None False None False 2450.0 0 4081460 158838 None code335 Supplying and fixing superior gality modular switch mounting polycorbonate plate with neceaary supporting back plate with rquired nos. of machine screwes, bolts nuts etc., complete on the existing metal/PVC box. 3.5.3) 6 Module Each 234.0 234.0 19.0 False None None False None False 4446.0 0 4081461 158838 None code336 Supplying and fixing superior gality modular switch mounting polycorbonate plate with neceaary supporting back plate with rquired nos. of machine screwes, bolts nuts etc., complete on the existing metal/PVC box. 3.5.4) 8 Module Each 284.0 284.0 25.0 False None None False None False 7100.0 0 4081462 158838 None code337 Supplying and fixing superior gality modular switch mounting polycorbonate plate with neceaary supporting back plate with rquired nos. of machine screwes, bolts nuts etc., complete on the existing metal/PVC box. 3.4.6)10-12Way Each 344.0 344.0 17.0 False None None False None False 5848.0 0 4081463 158838 None code338 Supplying and fixing superior gality modular switch mounting polycorbonate plate with neceaary supporting back plate with rquired nos. of machine screwes, bolts nuts etc., complete on the existing metal/PVC box. 3.4.7)16Way Each 397.0 397.0 15.0 False None None False None False 5955.0 0 4081464 158838 None code339 Supplying and fixing of modular switch/Socket/stepped electeonic fan regulator/ dimmer/telephone socket etc on existing modular switch plate. 3.6.1) 6A mps one way Each 102.0 102.0 395.0 False None None False None False 40290.0 0 4081465 158838 None code340 Supplying and fixing of modular switch/Socket/stepped electeonic fan regulator/ dimmer/telephone socket etc on existing modular switch plate. 3.6.2) 6A mps Two way Each 166.0 166.0 20.0 False None None False None False 3320.0 0 4081466 158838 None code341 Supplying and fixing of modular switch/Socket/stepped electeonic fan regulator/ dimmer/telephone socket etc on existing modular switch plate. 3.6.3) 6A mps 3way socket. Each 162.0 162.0 90.0 False None None False None False 14580.0 0 4081467 158838 None code342 Supplying and fixing of modular switch/Socket/stepped electeonic fan regulator/ dimmer/telephone socket etc on existing modular switch plate. 3.6.4) Stepped fan regulator. Each 357.0 357.0 82.0 False None None False None False 29274.0 0 4081468 158838 None code343 Supplying and fixing of modular switch/Socket/stepped electeonic fan regulator/ dimmer/telephone socket etc on existing modular switch plate. 3.6.8) 16Amps one way switch Each 180.0 180.0 45.0 False None None False None False 8100.0 0 4081469 158838 None code344 Supplying and fixing of modular switch/Socket/stepped electeonic fan regulator/ dimmer/telephone socket etc on existing modular switch plate. 3.6.9) 32A DP Switch Each 326.0 326.0 10.0 False None None False None False 3260.0 0 4081470 158838 None code345 Supplying and fixing of modular switch/Socket/stepped electeonic fan regulator/ dimmer/telephone socket etc on existing modular switch plate. 3.6.11) 6/16Amps univeral socket Each 236.0 236.0 45.0 False None None False None False 10620.0 0 4081471 158838 None code346 Supplying and fixing of modular switch/Socket/stepped electeonic fan regulator/ dimmer/telephone socket etc on existing modular switch plate. 3.6.12) TV/Telephone socket Each 156.0 156.0 6.0 False None None False None False 936.0 0 4081472 158838 None code347 Supplying and fixing of bakelite DP/Socket/switch with/without neon indicator over excisting wood board or flush mounting in plastic /nitchesMOUNTING/telephone socket etc on existing modular switch plate. 3.7) 32Amps flush/projected type DP switch Each 646.0 646.0 5.0 False None None False None False 3230.0 0 4081473 158838 None code348 Concealed Conduit System: Supplying …. Mm dia 2mm2.5mm Thick heavy gauge PVC conduit pipe with suitable size bends, metal/PVC junction boxes adhesive paste etc… and running before concreting th eslab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be convered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary 1.2.1) 19/20mm dia 2mm thik m 66.0 66.0 1750.0 False None None False None False 115500.0 0 4081474 158838 None code349 Concealed Conduit System: Supplying …. Mm dia 2mm2.5mm Thick heavy gauge PVC conduit pipe with suitable size bends, metal/PVC junction boxes adhesive paste etc… and running before concreting th eslab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be convered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary 1.2.2) 25mm dia 2mm thik m 78.0 78.0 3250.0 False None None False None False 253500.0 0 4081475 158838 None code350 Concealed Conduit System: Supplying …. Mm dia 2mm2.5mm Thick heavy gauge PVC conduit pipe with suitable size bends, metal/PVC junction boxes adhesive paste etc… and running before concreting th eslab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be convered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary 1.2.3) 32mm dia 2.5mm thik m 103.0 103.0 750.0 False None None False None False 77250.0 0 4081476 158838 None code351 Groove cutting: Supplying …. Mm dia 2mm2.5mm Thick heavy gauge PVC conduit pipe with suitable size bends, metal/PVC junction boxes adhesive paste etc… by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering up to the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary. 1.3.1) 19/20mm dia 2mm thik m 68.0 68.0 680.0 False None None False None False 46240.0 0 4081477 158838 None code352 Groove cutting: Supplying …. Mm dia 2mm2.5mm Thick heavy gauge PVC conduit pipe with suitable size bends, metal/PVC junction boxes adhesive paste etc… by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering up to the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary. 1.3.2) 25mm dia 2mm thik m 79.0 79.0 850.0 False None None False None False 67150.0 0 4081478 158838 None code353 Groove cutting: Supplying …. Mm dia 2mm2.5mm Thick heavy gauge PVC conduit pipe with suitable size bends, metal/PVC junction boxes adhesive paste etc… by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering up to the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary. 1.3.3) 32mm dia 2.5mm thik m 99.0 99.0 250.0 False None None False None False 24750.0 0 4081479 158838 None code354 Wiring for lighting /power circuit using one of PVC insulated 1100v grade,multis and Copper conductor single core cable in open or consealed system of wiring. 2.3.2) 1.5 sqmm m 26.0 26.0 3769.0 False None None False None False 97994.0 0 4081480 158838 None code355 Wiring for lighting /power circuit using one of PVC insulated 1100v grade,multis and Copper conductor single core cable in open or consealed system of wiring. 2.3.3) 2.5 sqmm m 42.0 42.0 5380.0 False None None False None False 225960.0 0 4081481 158838 None code356 Wiring for lighting /power circuit using one of PVC insulated 1100v grade,multis and Copper conductor single core cable in open or consealed system of wiring. 2.3.4) 4 sqmm m 63.0 63.0 1820.0 False None None False None False 114660.0 0 4081482 158838 None code357 Wiring for lighting /power circuit using one of PVC insulated 1100v grade,multis and Copper conductor single core cable in open or consealed system of wiring. 2.3.5) 6 sqmm m 92.0 92.0 1860.0 False None None False None False 171120.0 0 4081483 158838 None code358 Supplying and fixing regular MCB distribution boards on wall/ woodboard /flush mounting required clamps,bolts,nuts etc.. with provision for fixing suitable type capacity MCB's single phase /3 phase /single door with powder coated painting etc., complete II. Double Door 5.19.8) 8Way SP & N Each 1854.0 1854.0 2.0 False None None False None False 3708.0 0 4081484 158838 None code359 Supplying and fixing regular MCB distribution boards on wall/ woodboard /flush mounting required clamps,bolts,nuts etc.. with provision for fixing suitable type capacity MCB's single phase /3 phase /single door with powder coated painting etc., complete II. Double Door 5.19.11)4 Way TP & N Each 4038.0 4038.0 3.0 False None None False None False 12114.0 0 4081485 158838 None code360 Supplying and fixing regular MCB distribution boards on wall/ woodboard /flush mounting required clamps,bolts,nuts etc.. with provision for fixing suitable type capacity MCB's single phase /3 phase /single door with powder coated painting etc., complete II. Double Door 5.19.12)6 Way TP & N Each 4940.0 4940.0 3.0 False None None False None False 14820.0 0 4081486 158838 None code361 Supplying and fixing regular MCB distribution boards on wall/ woodboard /flush mounting required clamps,bolts,nuts etc.. with provision for fixing suitable type capacity MCB's single phase /3 phase /single door with powder coated painting etc., complete II. Double Door 5.19.13)8 Way TP & N Each 6091.0 6091.0 1.0 False None None False None False 6091.0 0 4081487 158838 None code362 Supplying and fixing and wiring Earth Leakage Miniature Circuit Breaker [RCCB] 240/450V up 300mA sensitivity on exsiting wood/panel board. 5.20.4)32-40 Amps 2 Pole Each 4559.0 4559.0 2.0 False None None False None False 9118.0 0 4081488 158838 None code363 Supplying and fixing and wiring Earth Leakage Miniature Circuit Breaker [RCCB] 240/450V up 300mA sensitivity on exsiting wood/panel board. 5.20.8)32-40 Amps 4 Pole Each 5147.0 5147.0 7.0 False None None False None False 36029.0 0 4081489 158838 None code364 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and wiring complete as required. 5.18.1)6-32Amps SP 1 Group 'A' Each 415.0 415.0 78.0 False None None False None False 32370.0 0 4081490 158838 None code365 Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit … The pit should be filled with equal proportion of salt and charcoal 150mm all-round the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI wire of size as per ISI specification 7.3.3. of IS 732 using 12mm dia bolts, nuts, washers and check nuts etc., the pipe shall have 16 through holes of 12 mm dia Nos 3510.0 3510.0 10.0 False None None False None False 35100.0 0 4081491 158838 None code366 Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40 mm dia 2.9 mm thick 2.5m long GI pipe with GI funnel with mesh and suitable size reducer fixed on the top of the earth electrode.The funnel should be enclosed in a CC chamber of 400x400x400 mm with a cast iron cover. The earth electrode shall have staggered holes of 12 mm dia and the electrode should be covered 150 mm all-round with alternate layers of salt and charcoal from the bottom of the CC chamber. The connection from the electrode is to be established through GI strip using GI bolts and nuts Nos 4256.0 4256.0 4.0 False None None False None False 17024.0 0 4081492 158838 None code367 Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. Copper strip 12.58.2)25 x 3 mm GI strip m 82.0 82.0 120.0 False None None False None False 9840.0 0 4081493 158838 None code368 Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. Copper strip 12.58.3)25 x 6 mm GI strip m 128.0 128.0 80.0 False None None False None False 10240.0 0 4081494 158838 None code369 12.58.7)25 x 3 mm Copper strip m 570.0 570.0 120.0 False None None False None False 68400.0 0 4081495 158838 None code370 Supplying, errection, testing & commissioning of ON-LINE UPS system suitable for operation on 230V, 50Hz, A/C supply, with all accessories complete and Excluding batteries and wiring complete. 9.3.2) 3KVA ON LINE UPS Each 38719.0 38719.0 1.0 False None None False None False 38719.0 0 4081496 158838 None code371 Supplying, errection, testing & commissioning of ON-LINE UPS system suitable for operation on 230V, 50Hz, A/C supply, with all accessories complete and Excluding batteries and wiring complete. 9.5.3) 26 AH Capacity batteries Each 3611.0 3611.0 16.0 False None None False None False 57776.0 0 4081497 158838 None code372 Supplying & fixing cast Aluminium round or oblong type bulk head fitting with GI wire guard,glass cover with 15 watts 230V CFL lamp Each 70.0 70.0 12.0 False None None False None False 840.0 0 4081498 158838 None code373 Supplying of 2 feet LED PVC square batten with high quality diffuser with ife of 25000 burninng hours & 70% lumen maintance with CRI greater than 80. power input :220-240V @ 50 hz & power factor greater than .9 along with CE approved drivers. 5 years warranty 11.3.1)LED light fitting 1x2' -9/10w Each 511.0 511.0 13.0 False None None False None False 6643.0 0 4081499 158838 None code374 Supplying of 2 feet LED PVC square batten with high quality diffuser with ife of 25000 burninng hours & 70% lumen maintance with CRI greater than 80. power input :220-240V @ 50 hz & power factor greater than .9 along with CE approved drivers. 5 years warranty 11.3.2)LED light fitting 1x4' -20/22w Each 690.0 690.0 197.0 False None None False None False 135930.0 0 4081500 158838 None code375 Supplying of recess/Surface mounting non integrated type LED down light ...... W luminaire comprising of pressure decast/ extruded aluminium housing, with spring loaded false ceiling clamps, LED of Power/COB with CCT 6500 degree K, CRI greater than 70%. efficacy greater than 100 lumen per watt, 120degree beam spread, life greater than 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The lamp compartment is enclosed with anti glare opal diffuser which enhances the lighting level. LEDs are driven by HF electronic driver integrated in a separate control gear assembly., with PF greater than 0.95, power loss should lesser than 5% of lamp wattage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 volts. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. 11.5.2) LED square or round down light 10-12W Each 885.0 885.0 100.0 False None None False None False 88500.0 0 4081501 158838 None code376 Supplying of recess/Surface mounting non integrated type LED down light ...... W luminaire comprising of pressure decast/ extruded aluminium housing, with spring loaded false ceiling clamps, LED of Power/COB with CCT 6500 degree K, CRI greater than 70%. efficacy greater than 100 lumen per watt, 120degree beam spread, life greater than 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The lamp compartment is enclosed with anti glare opal diffuser which enhances the lighting level. LEDs are driven by HF electronic driver integrated in a separate control gear assembly., with PF greater than 0.95, power loss should lesser than 5% of lamp wattage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 volts. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. 11.5.3) LED square or round down light 15-18W Each 1324.0 1324.0 125.0 False None None False None False 165500.0 0 4081502 158838 None code377 6.1)Supplying exhaust fan of 1440 RPM of 300mm (12") size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply. a) Group 'A' Each 1492.0 1492.0 20.0 False None None False None False 29840.0 0 4081503 158838 None code378 Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double bail bearing system. 48" Sweep (1200mm) 6.3.1)Regular model (Khaitan, Crompton Greaves, Orient, Polar, Bajaj, Usha, Havells, Almonard) Each 2984.0 2984.0 82.0 False None None False None False 244688.0 0 4081504 158838 None code379 Fixing all types and all capacities of fluorescent / fales ceiling /spot light /CFL / LED fittings indoor on the wall /ceiling / refters / girders using 23/0.0076" twin twisted PVC insulated wires, required Nos of round blocks and clamps . On wall / ceiling / Rafter / Girders Each 122.0 122.0 434.0 False None None False None False 52948.0 0 4081505 158838 None code380 Fixing a ceiling / wall mounting fan of all capacities and all types to the existing 's' hook with fan regulator to the existing board together with supplying and fixiting 5amps . Ceiling rose, necessary length of 23/0.0076 inch PVC insulated twin twisted copper wire and wiring . Each 171.0 171.0 102.0 False None None False None False 17442.0 0 4081506 158838 None code381 Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts and wiring complete. Protection of Overload and Short circuit with thermal Magnetic/Microprocessed release and Earth Fault as per IS-13947. ( Icu = Ics)(34/9) 5.15.10)125Amps 25kA Each 8487.0 8487.0 1.0 False None None False None False 8487.0 0 4081507 158838 None code382 Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts and wiring complete. Protection of Overload and Short circuit with thermal Magnetic/Microprocessed release and Earth Fault as per IS-13947. ( Icu = Ics)(34/9) 5.15.10)125Amps 25kA Each 10341.0 10341.0 1.0 False None None False None False 10341.0 0 4081508 158838 None code383 Supplying of multi function digital meter with three line back light LCD type display for voltage,Current,frequency,Power, Powerfactor,KVA, KWH,KVAR suitable for 3 Phase,4 wire LT network with IP 54 degree of protection and completely wired as required with communication Port and Class 0.5s accuracy. a)Group A Each 9315.0 9315.0 1.0 False None None False None False 9315.0 0 4081509 158838 None code384 Supplying,fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based,digital readout of percentage leakage current,programable delay/auto/manual reset facility suitable to mount on DIN rail/flush mounting on panel board. a) Group A Each 9255.0 9255.0 1.0 False None None False None False 9255.0 0 4081510 158838 None code385 Supplying, fixing and wiring 50/5A to 400/5A 5VA Burden class 1 Current Transformer. a)Group A Each 562.0 562.0 4.0 False None None False None False 2248.0 0 4081511 158838 None code386 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and wiring complete as required. 1 Group 'A' 5.18.9)50-63Amps TPN Each 3088.0 3088.0 7.0 False None None False None False 21616.0 0 4081512 158838 None code387 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and wiring complete as required. 1 Group 'A' 5.18.8)40 Amps TPN Each 3044.0 3044.0 2.0 False None None False None False 6088.0 0 4081513 158838 None code388 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and wiring complete as required. 1 Group 'A' 5.18.6)50-63Amps DP Each 1102.0 1102.0 2.0 False None None False None False 2204.0 0 4081514 158838 None code389 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and wiring complete as required. 1 Group 'A' 5.17.4)6-32Amps DP Each 739.0 739.0 5.0 False None None False None False 3695.0 0 4081515 158838 None code390 Supplying,fixing and Fixing of Shunt trip suitable for MCCB. CBCT Each 1703.0 1703.0 3.0 False None None False None False 5109.0 0 4081516 158838 None code391 Supplying …..amps rated 3phase with netural bus bar using required capacity electrolytic alluminium strips covered with heat shrinkable coloured PVC sleeve,mounted on phenolic/ERP/DMC insulator which are mounted on powder coated 40x6 mm M.S.flat frame work in existing panel board.The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts,nuts and washers etc.,complete. 5.40.1)100Amps 4x30x6mm Alluminium Strips m 2465.0 2465.0 6.0 False None None False None False 14790.0 0 4081517 158838 None code392 Supplying …..amps rated 3phase with netural bus bar using required capacity electrolytic alluminium strips covered with heat shrinkable coloured PVC sleeve,mounted on phenolic/ERP/DMC insulator which are mounted on powder coated 40x6 mm M.S.flat frame work in existing panel board.The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts,nuts and washers etc.,complete. 5.40.2)250Amps 4x30x10mm Alluminium Strips m 2465.0 2465.0 4.0 False None None False None False 9860.0 0 4081518 158838 None code393 Fabricating supplying and mounting MS box made out 16 SWG suitable for floor/wall mounting,fully weather proof with provision for better heat dissipation, provided with hinged front cover,equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 2 coats of red oxide primer paint and finally finished with approved colour enameled metal paint etc., complete. 5.42.1)14SWG Sq CM 0.5 0.5 22000.0 False None None False None False 11000.0 0 4081519 158838 None code394 Fabricating supplying and mounting MS box made out 16 SWG suitable for floor/wall mounting,fully weather proof with provision for better heat dissipation, provided with hinged front cover,equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 2 coats of red oxide primer paint and finally finished with approved colour enameled metal paint etc., complete. 5.42.2)16SWG Sq CM 0.43 0.43 25000.0 False None None False None False 10750.0 0 4081520 158838 None code395 Supplying and fixing angle iron frame work fabricated out of M.S ange iron..and M.S.flat ….with bolts,washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint. 5.41.2) 50x50x6mm m 395.0 395.0 6.0 False None None False None False 2370.0 0 4081521 158838 None code396 Supplying and fixing angle iron frame work fabricated out of M.S ange iron..and M.S.flat ….with bolts,washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint. 5.41.3)75x75x6mm C channel m 555.0 555.0 8.0 False None None False None False 4440.0 0 4081522 158838 None code397 Supplying and fixing of LED type pannel board indicating lamp with reqired colour suitable for 220v A.C.50 Hz 12/24v D.C. a)Group A Each 515.0 515.0 3.0 False None None False None False 1545.0 0 4081523 158838 None code398 Supplying of LT UG cable having aluminium conductor PVC insulated, sheathed, galvanised, steel wire/steel tap armoured cable with PVC outer sheathing 1.1 KV class I.Class 'A' PVC Cable 6.4.2) 4 core 10 sqmm m 130.0 130.0 140.0 False None None False None False 18200.0 0 4081524 158838 None code399 Supplying of LT UG cable having aluminium conductor PVC insulated, sheathed, galvanised, steel wire/steel tap armoured cable with PVC outer sheathing 1.1 KV class I.Class 'A' PVC Cable 6.4.2) 4 core 16 sqmm m 150.0 150.0 50.0 False None None False None False 7500.0 0 4081525 158838 None code400 Supplying of LT UG cable having aluminium conductor PVC insulated, sheathed, galvanised, steel wire/steel tap armoured cable with PVC outer sheathing 1.1 KV class I.Class 'A' PVC Cable 6.4.5)3.5 core 25 sqmm m 180.0 180.0 75.0 False None None False None False 13500.0 0 4081526 158838 None code401 Supplying of LT UG cable having aluminium conductor PVC insulated, sheathed, galvanised, steel wire/steel tap armoured cable with PVC outer sheathing 1.1 KV class I.Class 'A' PVC Cable 6.4.8)3.5 core 70 sqmm m 350.0 350.0 110.0 False None None False None False 38500.0 0 4081527 158838 None code402 Labour charges for laying of 1.1 KV class UG cable in existing trench GI pipe / stoneware pipe / on wall / on pole as required In existing trench/duct. 6.5.1) 6 sqmm to 16 sqmm m 11.88 11.88 190.0 False None None False None False 2257.2 0 4081528 158838 None code403 Labour charges for laying of 1.1 KV class UG cable in existing trench GI pipe / stoneware pipe / on wall / on pole as required In existing trench/duct. 6.5.2) 25 sqmm to 75 sqmm m 15.5 15.5 185.0 False None None False None False 2867.5 0 4081529 158838 None code404 Supplying tinnd copper lugs and crimping and wiring to terminal point for wire of the following sizes 6.17.5) 10 sqmm Each 8.0 8.0 2.0 False None None False None False 16.0 0 4081530 158838 None code405 Supplying tinnd copper lugs and crimping and wiring to terminal point for wire of the following sizes .6.17.6) 16 sqmm Long Barrel Each 20.0 20.0 4.0 False None None False None False 80.0 0 4081531 158838 None code406 Supplying tinnd copper lugs and crimping and wiring to terminal point for wire of the following sizes 6.17.7) 25 sqmm Long Barrel Each 190.0 190.0 2.0 False None None False None False 380.0 0 4081532 158838 None code407 Supplying tinnd copper lugs and crimping and wiring to terminal point for wire of the following sizes 6.17.10) 70sqmm Long Barrel Each 190.0 190.0 6.0 False None None False None False 1140.0 0 4081533 158838 None code408 Supplying and fixingof heavy duty cable glands suitable or UG cable o 1.1KV class (metal only) 6.11.2) 25 mm dia Each 84.0 84.0 6.0 False None None False None False 504.0 0 4081534 158838 None code409 Supplying and fixingof heavy duty cable glands suitable or UG cable o 1.1KV class (metal only) 6.11.3) 32 mm dia Each 117.0 117.0 2.0 False None None False None False 234.0 0 4081535 158838 None code410 Supplying and fixingof heavy duty cable glands suitable or UG cable o 1.1KV class (metal only) 6.11.4) 45 mm dia Each 194.0 194.0 6.0 False None None False None False 1164.0 0 4081536 158838 None code411 77.22) Supply & fixing of Caution/Danger name board as per drawing( BESCOM SR . CDS-1) Each 207.0 207.0 10.0 False None None False None False 2070.0 0 4081537 158838 None code412 Providing and filling sand in excavated trench to cover already laid UG cable to a depth of 150mm alround the cable. m 100.0 100.0 285.0 False None None False None False 28500.0 0 4081538 158838 None code413 Digging of trench of 0.6m deep x 0.50 mtr wide refiling the trench to the required ground level and consolidating etc., complete. 6.6.1) In soil (Ordinary) m 76.0 76.0 285.0 False None None False None False 21660.0 0 4081539 158838 None code414 PART A - Providing 2 pole structure at tapping point from the existing feeder / sub-station RCC poles DP structure using 9 Mtrs Long RCC pole with 145kg W.L With structure Kit. Set 20928.0 20928.0 1.0 False None None False None False 20928.0 0 4081540 158838 None code415 11 kv,5kA Polymeric pin insulators (24mm Dia FRP ROD) Nos 205.0 205.0 6.0 False None None False None False 1230.0 0 4081541 158838 None code416 11Kv-45kN Polymeric disc insulators Nos 186.0 186.0 6.0 False None None False None False 1116.0 0 4081542 158838 None code417 Guy set complete with No. 15 strain insulators 7/10 SWG guy wire ,Guy Clamp, turn buckle & Anchor rod Set 1170.0 1170.0 2.0 False None None False None False 2340.0 0 4081543 158838 None code418 Caution/danger board No 150.0 150.0 1.0 False None None False None False 150.0 0 4081544 158838 None code419 Anti climbing devices (12m GI barbed wire ) Kg 89.0 89.0 2.0 False None None False None False 178.0 0 4081545 158838 None code420 11kV 400A Double Break GOS Set 21260.0 21260.0 1.0 False None None False None False 21260.0 0 4081546 158838 None code421 H-frame for mounting GOS No 4337.0 4337.0 1.0 False None None False None False 4337.0 0 4081547 158838 None code422 Spiral earth electrode Nos 239.0 239.0 2.0 False None None False None False 478.0 0 4081548 158838 None code423 Lighting arresters ,9Kv,5kv metal oxide ceramic type with grounding disconnector (set/3No's) Set 1584.0 1584.0 1.0 False None None False None False 1584.0 0 4081549 158838 None code424 Earthing material pipe type for grounding Set 1729.0 1729.0 1.0 False None None False None False 1729.0 0 4081550 158838 None code425 11kV Dolo cutouts (1 set/3No's) Set 5872.0 5872.0 1.0 False None None False None False 5872.0 0 4081551 158838 None code426 Erection of 9Mts RCC DP Structure Long including fixing of structure kit & erection of poles Set 5372.0 5372.0 1.0 False None None False None False 5372.0 0 4081552 158838 None code427 Fixing of guyset with break insulator turn buckle and anchor rod Set 593.0 593.0 2.0 False None None False None False 1186.0 0 4081553 158838 None code428 Caution /danger board No 80.0 80.0 1.0 False None None False None False 80.0 0 4081554 158838 None code429 Fixing of Anticlimbing devices (Barbed Wire) Kg 42.0 42.0 2.0 False None None False None False 84.0 0 4081555 158838 None code430 Fixing of 400A 11kV D/B GOS With Wiring Set 1214.0 1214.0 1.0 False None None False None False 1214.0 0 4081556 158838 None code431 Erection of 'H' frame for mounting GOS Set 323.0 323.0 1.0 False None None False None False 323.0 0 4081557 158838 None code432 Fixing of spiral earth electrode along with pole Nos 93.0 93.0 2.0 False None None False None False 186.0 0 4081558 158838 None code433 Fixing of 11Kv lighting arrestor (set/3Nos) Set 119.0 119.0 1.0 False None None False None False 119.0 0 4081559 158838 None code434 Fixing of earth electrode Set 949.0 949.0 1.0 False None None False None False 949.0 0 4081560 158838 None code435 Fixing of DOLO cut out and Wiring (set/3Nos) Set 237.0 237.0 1.0 False None None False None False 237.0 0 4081561 158838 None code436 Guy concreting with Boulders, Mud and Sand Nos 250.0 250.0 2.0 False None None False None False 500.0 0 4081562 158838 None code437 Painting of 9 mtrs long RCC poles of dp structure Nos 960.0 960.0 2.0 False None None False None False 1920.0 0 4081563 158838 None code438 Providing cement concrete to 9 mtrs RCC poles including material & labour charges & curing a) Base concreting with cc 1:4:8500X650X150mm Nos 312.0 312.0 2.0 False None None False None False 624.0 0 4081564 158838 None code439 Providing cement concrete to 9 mtrs RCC poles including material & labour charges & curing b) Pole concreting in cc 1:2:4,650X500X1700mm Nos 3434.0 3434.0 2.0 False None None False None False 6868.0 0 4081565 158838 None code440 Providing cement concrete to 9 mtrs RCC poles including material & labour charges & curing b) Providing coping in cc1:2:4,650X500X1700mm alround the pole for a height of 300mm from ground level Nos 312.0 312.0 2.0 False None None False None False 624.0 0 4081566 158838 None code441 PART B : Erection of 3phase ,11KV / 433 Volts 63KVA,BEE 5 star rated distribution transformer centre using Double pole transformer structure [ D.P.T.S] MATERIAL COST 9mtrs Long RCC DP transformer structure using 9mtrs Long RCC poles structure kit. Set 31554.0 31554.0 1.0 False None None False None False 31554.0 0 4081567 158838 None code442 11KV,5KN polymeric pin insulator (24mm dia FRP rod ) Nos 205.0 205.0 3.0 False None None False None False 615.0 0 4081568 158838 None code443 11KV,45KN polymeric Disc insulator Nos 186.0 186.0 3.0 False None None False None False 558.0 0 4081569 158838 None code444 Guyset complete with No 15 strain insulator 7/10 SWG guywire guyclamp, turn buckle and anchor rod Set 1171.0 1171.0 4.0 False None None False None False 4684.0 0 4081570 158838 None code445 11KV /433V,3phase,63KVA 3phese 50 cycles distribution transformer BEE -5 star rated with oil No 182545.0 182545.0 1.0 False None None False None False 182545.0 0 4081571 158838 None code446 Earthing material pipe type for grounding Set 1729.0 1729.0 3.0 False None None False None False 5187.0 0 4081572 158838 None code447 Caution / danger board No 150.0 150.0 1.0 False None None False None False 150.0 0 4081573 158838 None code448 Anti climbing devices (12mtr GI barbed wire) Kg 89.0 89.0 2.0 False None None False None False 178.0 0 4081574 158838 None code449 GI wire 8 SWG Kg 75.4 75.4 5.0 False None None False None False 377.0 0 4081575 158838 None code450 Guy wire 7/10 SWG Kg 77.23 77.23 10.0 False None None False None False 772.3 0 4081576 158838 None code451 11KV Lighting arresters metal oxide 9KV,5KA polymeric type with grounding disconnector (set/3no's) Set 1584.0 1584.0 1.0 False None None False None False 1584.0 0 4081577 158838 None code452 LT Protection Kit for 63KVA Nos 2023.0 2023.0 2.0 False None None False None False 4046.0 0 4081578 158838 None code453 LT Distrubution box No 22686.0 22686.0 1.0 False None None False None False 22686.0 0 4081579 158838 None code454 LT wiring (From DTC to LT line through metering box & LT Protection Kit )single circuit Set 10080.0 10080.0 1.0 False None None False None False 10080.0 0 4081580 158838 None code455 LT electronic trivector meter 5A class -0.5/1.0 accurracy Nos 3396.0 3396.0 1.0 False None None False None False 3396.0 0 4081581 158838 None code456 LT matering box with CTs and necessary wiring for housing ETV meter Nos 5126.0 5126.0 1.0 False None None False None False 5126.0 0 4081582 158838 None code457 11kv class solid core type HG fuse unit (set /3no's) Set 1069.0 1069.0 1.0 False None None False None False 1069.0 0 4081583 158838 None code458 11KV 200AMPS single break GOS Set 9450.0 9450.0 1.0 False None None False None False 9450.0 0 4081584 158838 None code459 H frame for mounting 11 kv ,200A S/B GOS Set 4332.0 4332.0 1.0 False None None False None False 4332.0 0 4081585 158838 None code460 Spiral earth electrode Nos 239.0 239.0 2.0 False None None False None False 478.0 0 4081586 158838 None code461 Erection of 9Mts RCC DP transformer Structure Set 6983.0 6983.0 1.0 False None None False None False 6983.0 0 4081587 158838 None code462 Fixing of guyset with break insulators turu suckle & anchor rod Set 593.0 593.0 4.0 False None None False None False 2372.0 0 4081588 158838 None code463 Erection of 63 KVA transformer No 1193.0 1193.0 1.0 False None None False None False 1193.0 0 4081589 158838 None code464 Providing Earthings Set 949.0 949.0 3.0 False None None False None False 2847.0 0 4081590 158838 None code465 Fixing of caution / danger board No 80.0 80.0 1.0 False None None False None False 80.0 0 4081591 158838 None code466 Providing Anticlimbing devices Nos 42.0 42.0 2.0 False None None False None False 84.0 0 4081592 158838 None code467 Fixing of 11kv lighting arrestors (set/3no's) Set 119.0 119.0 1.0 False None None False None False 119.0 0 4081593 158838 None code468 Fixing of LT LT Protection Kit Nos 712.0 712.0 2.0 False None None False None False 1424.0 0 4081594 158838 None code469 Fixing of LT Distribution box No 385.0 385.0 1.0 False None None False None False 385.0 0 4081595 158838 None code470 Providing LT wiring No 949.0 949.0 1.0 False None None False None False 949.0 0 4081596 158838 None code471 Fixing of LT metering box No 865.0 865.0 1.0 False None None False None False 865.0 0 4081597 158838 None code472 Fixing of LT electronic trisector meter No 480.0 480.0 1.0 False None None False None False 480.0 0 4081598 158838 None code473 Fixing of HG fuse unit Set 237.0 237.0 1.0 False None None False None False 237.0 0 4081599 158838 None code474 Erection of 200A single break GOS Set 1104.0 1104.0 1.0 False None None False None False 1104.0 0 4081600 158838 None code475 Erection of 'H' frame for mounting GOS No 232.0 232.0 1.0 False None None False None False 232.0 0 4081601 158838 None code476 Fixing of spiral earth electrodes Nos 93.0 93.0 2.0 False None None False None False 186.0 0 4081602 158838 None code477 Guy concreting with boulders mud & sand Nos 250.0 250.0 4.0 False None None False None False 1000.0 0 4081603 158838 None code478 Providing Painting of 9mts RCC of DP structure poles Nos 960.0 960.0 2.0 False None None False None False 1920.0 0 4081604 158838 None code479 Providing cement concrete to 9mtrs RCC poles including material and labour cost a) Base concreting in cc 1:4:8,500X650X150mm Nos 312.0 312.0 2.0 False None None False None False 624.0 0 4081605 158838 None code480 Providing cement concrete to 9mtrs RCC poles including material and labour cost b) pole concreting in cc 1:2:4:650X500X1700mm Nos 3434.0 3434.0 2.0 False None None False None False 6868.0 0 4081606 158838 None code481 Providing cement concrete to 9mtrs RCC poles including material and labour cost c) pole coping in cc 1:2:4 and as per actuals Nos 312.0 312.0 2.0 False None None False None False 624.0 0 4081607 158838 None code482 11KV 3Cx95Sqmm HT UG cable for insulations high quality clean XLPE compound shall be used (tree from microvoids moisture content ambers and contaminations ) with pressure extruded in sheeth ROUND WIRE ARMOURED as per IS-7098.3CX95sqmm (2Run) Km 1115615.0 1115615.0 0.12 False None None False None False 133873.8 0 4081608 158838 None code483 11kv Heat shrinkable outdoor type cable termination kit for XLPE cable of 95 sqmm Kit 3966.0 3966.0 1.0 False None None False None False 3966.0 0 4081609 158838 None code484 11kv Heat shrinkable indoor type cable termination kit for XLPE cable of 95 sqmm Kit 3651.0 3651.0 1.0 False None None False None False 3651.0 0 4081610 158838 None code485 Cable covering tiles 250X125X40mm Nos 10.0 10.0 225.0 False None None False None False 2250.0 0 4081611 158838 None code486 River Sand Cum 1700.0 1700.0 10.0 False None None False None False 17000.0 0 4081612 158838 None code487 Rcc home pipes 2000mm long 150mm dia Nos 300.0 300.0 2.0 False None None False None False 600.0 0 4081613 158838 None code488 Collars for Rcc hume pipes Nos 80.0 80.0 2.0 False None None False None False 160.0 0 4081614 158838 None code489 GI pipe 100mm dia m 1528.0 1528.0 20.0 False None None False None False 30560.0 0 4081615 158838 None code490 Route and joint indicating stores with MS anchor rod Nos 130.0 130.0 2.0 False None None False None False 260.0 0 4081616 158838 None code491 Earth worth excavation for cable trench of 0.5 to 0.75 mtr width and depth up to 1 mtr including trial pits depending on bank up to a lead of 50mtrs. Supply and displaying necessary danger board's and lighting . Using sight ruels and sign board at every 100mts wherever necessary as directed in ordinary soil Cum 260.0 260.0 30.0 False None None False None False 7800.0 0 4081617 158838 None code492 Laying of cable in existing trench 3X95 sqmm Km 45284.0 45284.0 0.12 False None None False None False 5434.08 0 4081618 158838 None code493 Refilling the cable trenches with selected available earth from trench excavation including watering , consolidation in layers of 15cm thickness including depositing of the surplus earth with a lead Cum 58.0 58.0 40.0 False None None False None False 2320.0 0 4081619 158838 None code494 Making and fixing terminations kit(pothead) for HT cable of 3X95sqmm Nos 1965.0 1965.0 6.0 False None None False None False 11790.0 0 4081620 158838 None code495 Covering the cable with tiles Km 3292.0 3292.0 0.01 False None None False None False 32.92 0 4081621 158838 None code496 Spreading and forming with sand around the cable to a depth of 75mm and width of 500mm Km 11570.0 11570.0 0.01 False None None False None False 115.7 0 4081622 158838 None code497 Laying of rcc hume pipe 2000mm long and 150mm dia m 51.0 51.0 4.0 False None None False None False 204.0 0 4081623 158838 None code498 Laying of GI pipe 100mm dia m 58.0 58.0 20.0 False None None False None False 1160.0 0 4081624 158838 None code499 Fixing of route and joint indicating stores Nos 86.0 86.0 2.0 False None None False None False 172.0 0 4081625 158838 None code500 Providing chain link fencing 50mm size of 8 gauge properly stretched between rectangular poles and fixed with suitable bolts and nuts the tree end shall be welded to the pole and block pipe at top and bottom as required including cost of all materials,labour,lead and lifts,cutting,bending whereever necessary,wastage and lapping etc complete as per the directions of the engineer incharge of work including two coats of approved quality paint over one coat of primary paint. Sqm 983.0 983.0 32.0 False None None False None False 31456.0 0 4081626 158838 None code501 Fabricating ,supplying and erecting swaged tubular pole of height … Mtr having three sections , and providing two coats of red oxide paint & finised with two coats of enameled paint of approved quality & colour & M.S. base plate of suitable size welded at the bottom of the pole (as per IS) and 40mm dia GI /flexible PVC pipe of 1 mtr length fitted to the heavy gauge polycarbonate control box including 5 way connector of size 167X125X82mm for 7.5M pole /200X160X98mm for remaining length of pole with front opening cover with locking arrangements and suitable capacity MCB/DP switch, The pole shall be erected in cement concrete work (1:2:4) including excavation and refilling of planting depth of the pole to the ground level and the coping CC shall be up to 0.6M above ground level as per IS 2713-7. Erection of heavy duty pole on footpath/median 9Mt (5Mt Hb,165.1mm dia 4.85mm thick x2M Hm,139.7mm dia 4.50mm thick x 2M Ht,114.3mm dia 3.65mm thick ) as per IS 410 SP 32 Each 15500.0 15500.0 4.0 False None None False None False 62000.0 0 4081627 158838 None code502 Supplying, and fixing of Hot dip Galvanized suitable for out door luminaries and mounted on Octagonal pole using necessary bolts, nuts etc., complete. Single Arm Bracket with 1000mm Standard 40/50MM dia Each 1700.0 1700.0 4.0 False None None False None False 6800.0 0 4081628 158838 None code503 Supplying of LT UG cable having aluminium conductor PVC insulated, sheathed, galvanised, steel wire/steel tap armoured cable with PVC outer sheathing 1.1 KV class I.Class 'A' PVC Cable 6.4.2) 4 core 10 sqmm m 130.0 130.0 280.0 False None None False None False 36400.0 0 4081629 158838 None code504 Labour charges for laying of 1.1 KV class UG cable in existing trench GI pipe / stoneware pipe / on wall / on pole as required In existing trench/duct. 6.5.2) 25 sqmm to 75 sqmm m 15.5 15.5 280.0 False None None False None False 4340.0 0 4081630 158838 None code505 Supplying tinnd copper lugs and crimping and wiring to terminal point for wire of the following sizes 10 sqmm Each 8.0 8.0 8.0 False None None False None False 64.0 0 4081631 158838 None code506 Supplying and fixingof heavy duty cable glands suitable or UG cable o 1.1KV class (metal only) 25 mm dia Each 84.0 84.0 8.0 False None None False None False 672.0 0 4081632 158838 None code507 Digging of trench of 0.6m deep x 0.50 mtr wide refiling the trench to the required ground level and consolidating etc., complete. In soil (ordinary) m 76.0 76.0 245.0 False None None False None False 18620.0 0 4081633 158838 None code508 Supply and installation /Fixing /Provision of Outdoor type Thermoplastic Modular Panel enclosure with transparent Polycarbonate Lid, shock proof ,IP65 (Weather proof ),rust proof,dust proof,water proof,corrosion proof having internally Embedded gasket on both lid and flap suitable to fix Single Phase/Three phase Energy Meter in suitable base plate and having a provision for Fuse/MCB cutout with suitable transparent hinged flap opening for operating MCB along with complete tamper proof sealing facility . a)300mmX300mmX214mm Each 4512.0 4512.0 1.0 False None None False None False 4512.0 0 4081634 158838 None code509 Supplying and fixing Microprocessor based Electronic timer (without contactor,Din Mounting using necessary bolts,nuts and washers etc.,.)3-120sec setting. Each 2315.0 2315.0 3.0 False None None False None False 6945.0 0 4081635 158838 None code510 Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of ani glare clear diffuser with Injection moulded polycarbonate material, deliverying superior light output. Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70% degrees. CCT 5500K, IP 66 optical and elecrical compartment & impact resistance of complete luminaire greater than IK08. Power Factory greater than 0.9 with mains, Surge Protection - Min 5KV along with Over voltage/Overload, short circuit/ miss-wiring protection. Comptatible for pole mouting with oter dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz appplication. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenace at the sight site location with minimized minimal tools. LED Light fixture with ........ W System Power consumption. LED Efficiency greater than 130lm/w, nominal CRI greater than 75. Luminaire manufacturere should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008. Housing with supplier word makr /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/Lumileds/Osram make LED Source. LED street light 90W No 8860.0 8860.0 4.0 False None None False None False 35440.0 0 4081636 158838 None code511 Supply & Installation of IP based H.264 Fixed colour Indoor dome type 2.0 mega pixels Day / Night camera, with high quality VGA CMOS sensor. with inbuilt IR filters and powered through POE (Power over Ethernet enabled). or 12V DC power supply unit with all fixing accessories. Make : Hikvision/CP Plus Each 5750.0 5750.0 18.0 False None None False None False 103500.0 0 4081637 158838 None code512 Supply & Installation of IP based H.264 Fixed colour C/Mount 2.0 mega pixels Day / Night camera, with high quality VGA CMOS sensor. with inbuilt IR filters and powered through POE (Power over Ethernet enabled). or 12V DC power supply unit with all fixing accessories. Make: Hikvision/CP Plus Each 5750.0 5750.0 22.0 False None None False None False 126500.0 0 4081638 158838 None code513 16 channel NVR Make : HIKVISION/ CP Plus Each 25000.0 25000.0 1.0 False None None False None False 25000.0 0 4081639 158838 None code514 32 channel NVR Make : HIKVISION/ CP Plus Each 35000.0 35000.0 1.0 False None None False None False 35000.0 0 4081640 158838 None code515 4 TB hard disc Each 15000.0 15000.0 6.0 False None None False None False 90000.0 0 4081641 158838 None code516 21 Colour SVGA TFT Monitor Make: Samsung/Equ. Each 12000.0 12000.0 2.0 False None None False None False 24000.0 0 4081642 158838 None code517 Supply & Installation of IP based H.264 Fixed colour Indoor dome type 2.0 mega pixels Day / Night camera, with high quality VGA CMOS sensor. with inbuilt IR filters and powered through POE (Power over Ethernet enabled). or 12V DC power supply unit with all fixing accessories. Make : Hikvision/CP Plus Each 350.0 350.0 18.0 False None None False None False 6300.0 0 4081643 158838 None code518 Supply & Installation of IP based H.264 Fixed colour C/Mount 2.0 mega pixels Day / Night camera, with high quality VGA CMOS sensor. with inbuilt IR filters and powered through POE (Power over Ethernet enabled). or 12V DC power supply unit with all fixing accessories. Make: Hikvision/CP Plus Each 350.0 350.0 22.0 False None None False None False 7700.0 0 4081644 158838 None code519 16 channel NVR Make : HIKVISION/ CP Plus Each 1000.0 1000.0 1.0 False None None False None False 1000.0 0 4081645 158838 None code520 32 channel NVR Make : HIKVISION/ CP Plus Each 1000.0 1000.0 1.0 False None None False None False 1000.0 0 4081646 158838 None code521 4 TB hard disc Each 1200.0 1200.0 6.0 False None None False None False 7200.0 0 4081647 158838 None code522 21 Colour SVGA TFT Monitor Make: Samsung/Equ. Each 350.0 350.0 2.0 False None None False None False 700.0 0 4081648 158838 None code523 Supplying and drawing UTP-CAT 6E LAN Cable a)Group A m 38.0 38.0 3500.0 False None None False None False 133000.0 0 4081649 158838 None code524 Supplying and drawing PVC flexible one pair telephone unarmoured tinner copper cable of approval make. 8.2.2)2 Pair m 21.0 21.0 500.0 False None None False None False 10500.0 0 4081650 158838 None code525 Supplying and drawing PVC flexible one pair telephone unarmoured tinner copper cable of approval make. 8.2.6)10 Pair m 81.0 81.0 50.0 False None None False None False 4050.0 0 4081651 158838 None code526 supplying fixing of network switches Supplying & fixing of switch mounting rack with power manager & cable manger 8.4.4)9U with 450mm depth Each 8476.0 8476.0 2.0 False None None False None False 16952.0 0 4081652 158838 None code527 supplying fixing of I/O socket with back box 8.10.1)Single I/o Each 490.0 490.0 110.0 False None None False None False 53900.0 0 4081653 158838 None code528 supplying fixing of I/O socket with back box 8.10.2)Double I/o Each 550.0 550.0 10.0 False None None False None False 5500.0 0 4081654 158838 None code529 supplying fixing of patch panel for LAN cabling 8.9.7)16 port 10/100/1000switch Each 1050.0 1050.0 3.0 False None None False None False 3150.0 0 4081655 158838 None code530 supplying fixing of PVC inssulated gas injected physical foam jelly flooded co-axial TV RG-6 cable m 42.0 42.0 200.0 False None None False None False 8400.0 0 4081656 158838 None code531 supplying fixing of … mtrs Cat6 patch cable 8.11.1)1mtr Each 224.0 224.0 100.0 False None None False None False 22400.0 0 4081657 158838 None code532 supplying fixing of … mtrs Cat6 patch cable 8.11.2)2mtr Each 257.0 257.0 20.0 False None None False None False 5140.0 0 4081658 158838 None code533 MDF 8.13.1) 10Pair Each 345.0 345.0 2.0 False None None False None False 690.0 0 4081659 158838 None code534 Supplaying & Fixind of Power strip Each 1000.0 1000.0 2.0 False None None False None False 2000.0 0
generalCriterionList	createdTs version createdDate modifiedDate criterionType description tenderEligibilityCriterionDocumentList 1727336656000 0 None None ELIGIBILITY Tenders from Joint ventures are not acceptable. None 1727336656000 0 None None ELIGIBILITY Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka None 1727336656000 0 None None ELIGIBILITY Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document. None 1727336656000 0 None None ELIGIBILITY It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission. None 1727336656000 0 None None ELIGIBILITY EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection. None 1727336658000 0 None None ELIGIBILITY The tender document is part and parcel of the agreement. None 1727336662000 0 None None ELIGIBILITY The contractor shall obtain insurance coverage for all the workers deployed for this work. None 1727336667000 0 None None ELIGIBILITY Further details of the work or any clarifications can be obtained from the office of the Executive Engineer (Central office), KHB, Cauvery Bhavan, K.G. Road, Bangalore Ph: 080-22273511 ext-317, None 1727336670000 0 None None ELIGIBILITY The intending bidders are requested to note that they should abide by the detailed instructions and conditions contained in the Tender documents and further modifications done if any. None 1727336674000 0 None None ELIGIBILITY Corrigendum/modification/corrections, if any, will be published in the e procurement Web sites only. None 1727336677000 0 None None ELIGIBILITY KHB reserves the right to withdraw or cancel this invitation to BID/Tender without assigning any reason whatsoever None 1727336680000 0 None None ELIGIBILITY The bidder shall study the Tender document Carefully and quote the rates None 1727336683000 0 None None ELIGIBILITY All scanned documents to be uploaded shall be in original and are to be produced to the Executive Engineer to verify the documents within 3 days from the day of opening of Technical bid for verification, if required. None 1727336687000 0 None None ELIGIBILITY Drawings uploaded are only for Tender Purpose only. None 1727336692000 0 None None ELIGIBILITY GST shall be added separately in the estimate. None 1727336695000 0 None None ELIGIBILITY GST shall be paid to the tendered amount separately. None 1727336698000 0 None None ELIGIBILITY The bidder should maintain register of laborers deployed and wages paid for the workers and shall produce the documents whenever called for by the competent authority. Remittance towards PF shall be commensurate with the labour component of the work involved. None 1727336701000 0 None None ELIGIBILITY The bidder shall give an undertaking that they would abide by the provisions of employees provident fund and shall remit PF of labourers to the respective PF offices or else KHB have the right to deduct the PF amount from the work bills and remit the same to respective PF offices. None 1727336706000 0 None None ELIGIBILITY The contractor shall quote his rates inclusive of PF as per the applicable rate as issued by the PF department from time to time None 1727336710000 0 None None ELIGIBILITY The successful bidder shall give an under taking that they would abide by the provisions of the Employees Provident Fund Act. None
preQualCriterionList	None
technicalCriterionList	createdTs version createdDate modifiedDate description criterionCategoryText criterionTypeOthersValue tenderTechnicalCriterionDocumentList None None None None Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs) None None None None None None Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender) None None None None None None Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction) None None None None None None Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year None None None None None None Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year None None None None None None Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx) None None None None None None Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period) None None None None None None Total value of civl engineering works executed and payments received in the last five years (year-wise) None None None None None None List of existing commitments and ongoing works None None None None None None List of works for which tenders already submitted None None None None None None Banker Details for reference None None None None None None Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded None None None None None None Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years None None None None None None Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded None None None None None None List of Financial Resources with Certificates None None None None None None Income Tax returns & PAN Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None ITR Filed Copy (Mentioning PAN) None None None None Scanned Copy of documentary proof for having executed similar nature of work not less than 50% of tender amount as defined in Government order No.FD 480 EXP-12/2014,Bangalore dated:19.07.2014 Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None Scanned copy of latest GST clearance certificate. Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Scanned copy of latest GST clearance certificate. None None None None Scanned copy of Pre-qualification letter issued by Karnataka Housing Board. Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Scanned copy of Pre-qualification letter issued by Karnataka Housing Board. None None None None As per Tender Documents KW-4 clause 3.3 key & critical equipments available. Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- As per Tender Documents KW-4 clause 3.3 key & critical equipments available. None None None None Executed in any one Financial year, the minimum quantities of work as mentioned in tender document Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Executed in any one Financial year, the minimum quantities of work as mentioned in tender document None None None None Required valid electrical license for executing similar nature of work as per tender document Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Required valid electrical license for executing similar nature of work as per tender document None None None None The Tenderer should have executed similar water supply/sanitary engineering works as per tender document Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- The Tenderer should have executed similar water supply/sanitary engineering works as per tender document None None None None GST Registration Certificate Financial Status None createdTs version createdDate modifiedDate documentName None None None None GST Registration None None None None To qualify for award of this contract , each tenderer in its name should have in the last five years achieved in at least two financial years a minimum financial turnover (In all classes of civil engineering construction works only) Financial Status None createdTs version createdDate modifiedDate documentName None None None None Audited CA Certificate of Annual Turnover None None None None Scanned copy of Credit lines/ letter of credit /Bankers certificate for at least 20% of amount put to tender in the current financial year on the name of work put to tender. Financial Status None createdTs version createdDate modifiedDate documentName None None None None Line of Credit None None None None Assessed Available Bid Capacity as per tender document Financial Status None createdTs version createdDate modifiedDate documentName None None None None Others -- Assessed Available Bid Capacity as per tender document None None None None Covering letter. Others Covering letter. createdTs version createdDate modifiedDate documentName None None None None Others -- Covering letter.
tenderCriterionDocumentList	documentName optional documentTypeText Annual Turnover Certificate True Technical Bid Company Registration Certificate True Technical Bid Reserved Category Certificate False Technical Bid Small Scale Industries Certificate False Technical Bid Work done certificate True Technical Bid key and critical equipment LIST True Technical Bid Income Tax returns & PAN no. True Technical Bid Pre-qualification certificate issued by KHB True Technical Bid GST clearance certificate True Technical Bid Credit lines/ letter of credit/Bankers certificate True Technical Bid Assessed available tender capacity calculation True Technical Bid Electrical license True Technical Bid Work done certificate with quantities True Technical Bid
tenderWorkLocationList
tenderAddress	createdTs 1727434446000 version 0 createdDate None modifiedDate None blockNumber CAUVERY BHAVAN 3RD FLOOR street None city Bengaluru state Karnataka pin 560009
tenderRecallDTO	None