createdTs	None
version	None
createdDate	None
modifiedDate	None
noticeInvitingTenderDTO	createdTs 1727517857322 version 2 createdDate None modifiedDate None tenderType RFQ evaluationType ONE_COVER evaluationTypeText One Cover invitingStrategy OPEN invitingStrategyText Open taxType INCLUSIVE_TAX tenderFee 500.00 emd 43000.00 bidValueType ITEM_WISE bidValueTypeText Item wise tenderReceiptClose 09-10-2024 16:00:00 tenderQueryClose 08-10-2024 17:00:00 technicalBidOpen None publishedDate 28-09-2024 15:39:08 publishedByPost RDPR_EE_DIV_CKD publishedByUser KPE10445 - PRAVEEN MATHAPATI bidValidityPeriod 90 noOfCalls 1 preBidMeetingDate None preBidMeetingYn False preQualificationBidOpen None denominationType RUPEES denominationTypeText Rupees retenderedYn None percentageRateTypeText None contactPerson SUBHAM KOLI splitEmdRequiredYn False emdBankGuarantee None emdCash None bgValidityPeriod None hideWeightage None multipleCurrencySelectionAllowedYn False isTechWeightageAllowed None highestBidderSelection False isVariableEmdAllowed None qcbsTenderYn None itemwiseEmdRequiredYn None sampleSubmissionDate None officeNumber 08338272131 mobileNumber 8197629009 tenderSupplierList None
tenderSchedule	createdTs 1727517857364 version 4 createdDate None modifiedDate None tenderNumber RDPR/2024-25/BD/WORK_INDENT9326 title CONSTRUCTION OF OFFICE/GODOWN BUILDING OF PRIMERY AGREECULTURE COLLABRATIVE ASSOCIATION NI ANKALI IN CHIKKODI TALUKA description CONSTRUCTION OF OFFICE/GODOWN BUILDING category WORKS categoryText Works ecv 1693114.72 deptName Rural Development and Panchayat Raj Department status PUBLISHED statusText Published remarks None csrValue None ecvtenderYn True location 828 locationName RDPR Division Office Chikkodi provisionalAmount 2000000.0 groupOverheadTotal None fileNumber PKPS/BUILD/ANKALI/2024-25
tenderSubEstimateList	createdTs version createdDate modifiedDate workCategoryName subEstimateName estimateTotal itemList 1727517857000 0 None None Buildings CONSTRUCTION OF OFFICE/GODOWN BUILDING OF PRIMERY AGREECULTURE COLLABRATIVE ASSOCIATION NI ANKALI IN CHIKKODI TALUKA 1638658.57 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 4101045 159782 None code01 Earth work in surface excavation by mechanical means for lowering & levelingthe ground for all works other than foundation in all kinds of soils & upto depthnot exceeding 300mm as per drawing and technical specifications, includingsetting out, shoring, strutting, barricading, caution lights, removal of stumpsand other deleterious matter including dressing of excavated surfaces, disposingoff or levelling the excavated earth or sorting & stacking the selected earth forreuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools,usage of machinery & other appurtenances required to complete the work.In all kinds of soils upto 300 mm depth Complete as per direction of Engineer in charge. Sqm 99.75 99.75 48.75 False None None False None False 4862.8125 0 4101046 159782 None code02 Earth work excavation for Foundation by mechanical means for all works &depth upto 3 m, as per drawing and technical specifications, including settingout, shoring, strutting, barricading, caution lights, including dressing ofexcavated surfaces, disposing off or levelling the excavated earth or sorting& stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5m including cost of labour, tools, usage of machinery & other appurtenacesrequired to complete the work In all kinds of soils Depth upto 3 m Complete as per direction of Engineer in charge. Cum 107.1 107.1 35.01 False None None False None False 3749.571 0 4101047 159782 None code03 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/ trap/basalt crushed graded coarse aggregates and fne aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifcations. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates Complete as per direction of Engineer in charge. Cum 6288.45 6288.45 3.69 False None None False None False 23204.3805 0 4101048 159782 None code04 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Complete as per direction of Engineer in charge. Cum 6652.8 6652.8 5.18 False None None False None False 34461.504 0 4101049 159782 None code05 Formwork & Centring Charges @ 8%. Complete as per direction of Engineer in charge. Cum 532.22 532.22 5.18 False None None False None False 2756.8996 0 4101050 159782 None code06 Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Complete as per direction of Engineer in charge. Cum 6652.8 6652.8 3.18 False None None False None False 21155.904 0 4101051 159782 None code07 Formwork & Centring Charges @70% Complete as per direction of Engineer in charge. Cum 4656.96 4656.96 0.99 False None None False None False 4610.3904 0 4101052 159782 None code08 Formwork & Centring Charges @50% Complete as per direction of Engineer in charge. Cum 3326.4 3326.4 2.19 False None None False None False 7284.816 0 4101053 159782 None code09 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Complete as per direction of Engineer in charge. Cum 7185.15 7185.15 6.74 False None None False None False 48427.911 0 4101054 159782 None code10 Formwork & Centring Charges @70% Complete as per direction of Engineer in charge. Cum 5029.6 5029.6 2.79 False None None False None False 14032.584 0 4101055 159782 None code11 Formwork & Centring Charges @60% Complete as per direction of Engineer in charge. Cum 4311.09 4311.09 3.95 False None None False None False 17028.8055 0 4101056 159782 None code12 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Complete as per direction of Engineer in charge. Cum 7185.15 7185.15 0.7 False None None False None False 5029.605 0 4101057 159782 None code13 Formwork & Centring Charges @45% Complete as per direction of Engineer in charge. Cum 3233.31 3233.31 0.7 False None None False None False 2263.317 0 4101058 159782 None code14 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Complete as per direction of Engineer in charge. Cum 7185.15 7185.15 7.57 False None None False None False 54391.5855 0 4101059 159782 None code15 Formwork & Centring Charges @50% Complete as per direction of Engineer in charge. Cum 3592.57 3592.57 7.57 False None None False None False 27195.7549 0 4101060 159782 None code16 Providing Coursed rubble masonry (first sort) with hard stone in foundation and plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)Complete as per direction of Engineer in charge. Cum 6948.9 6948.9 8.28 False None None False None False 57536.892 0 4101061 159782 None code17 Providing Coursed rubble masonry (second sort) with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) (1 cement : 6 coarse sand) Complete as per direction of Engineer in charge. Cum 6515.25 6515.25 5.24 False None None False None False 34139.91 0 4101062 159782 None code18 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. Complete as per direction of Engineer in charge. Cum 8367.45 8367.45 19.91 False None None False None False 166595.9295 0 4101063 159782 None code19 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Complete as per direction of Engineer in charge. Tonne 93929.85 93929.85 2.1537 False None None False None False 202296.717945 0 4101064 159782 None code20 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.Complete as per direction of Engineer in charge. Cum 279.3 279.3 34.43 False None None False None False 9616.299 0 4101065 159782 None code21 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/ trap/basalt crushed graded coarse aggregates and fne aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifcations. (The cost of steel reinforcement & formwork shall be paid separately)Complete as per direction of Engineer in charge. Cum 6527.85 6527.85 4.25 False None None False None False 27743.3625 0 4101066 159782 None code22 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:6 (1 cement: 4 fne sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifcations and as per directions of Engineer-in-charge. Complete as per direction of Engineer in charge. Sqm 292.95 292.95 117.45 False None None False None False 34406.9775 0 4101067 159782 None code23 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) fnished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fne sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifcations and as per directions of Engineer-in-charge. Sqm 389.55 389.55 135.49 False None None False None False 52780.1295 0 4101068 159782 None code24 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. Sqm 105.0 105.0 117.45 False None None False None False 12332.25 0 4101069 159782 None code25 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.. Sqm 2994.6 2994.6 57.7 False None None False None False 172788.42 0 4101070 159782 None code26 Providing and fxing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings / wooden frames with rawl plugs screws etc. Kg 176.4 176.4 189.0 False None None False None False 33339.6 0 4101071 159782 None code27 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wallthickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 2419mm x 2200mm. (The cost is inclusive of Complete as per direction of Engineer in charge. Sqm 7070.7 7070.7 9.0 False None None False None False 63636.3 0 4101072 159782 None code28 Providing and fixing 304 - grade stainless steel hand rails of 14-gauge pipes for Ramps or Staircase are made out of stainless steel hallow pipes, using 50mm dia for verticals @1.60 mtr c/c are fixed to the ramps or steps by drilling with bolts and 100mm dia MS base plates 10mm gauge for fixing of Vertical pipes 4 - Nos anchor bolts & 40mm dia pipes are fixed horizontally for 2-rows top, one pipes are fixed with vertical pipes another one are fixed with elbows and 25mm dia pipes are fixed horizontally for 2-rows below top measure @ equal intervals including cutting, welding, bending wherever necessary with suitable caps @ tops, bottoms & corners finishing with mat / shining etc., complete including cost and conveyance of all materials, labour for all items of work, HOM of equipment with all lead and lift, loading and unloading, transportation charges and all other incidental charges etc., complete as per specification and directions of the Engineer-in-charge of the work. Ramps or Staircase for physically challenged Complete as per direction of Engineer in charge. Kg 593.25 593.25 121.77 False None None False None False 72240.0525 0 4101073 159782 None code29 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. --do-- sal wood frames. Complete as per direction of Engineer in charge. Cum 103755.75 103755.75 0.14 False None None False None False 14525.805 0 4101074 159782 None code30 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifcations Complete as per direction of Engineer in charge. Nos 1066.8 1066.8 1.0 False None None False None False 1066.8 0 4101075 159782 None code31 Providing and fxing in position fully panelled Mathi/Nandi wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifcations. (excluding cost of fxtures) Complete as per direction of Engineer in charge. Sqm 7241.85 7241.85 3.22 False None None False None False 23318.757 0 4101076 159782 None code32 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifcations and as per directions of Engineer-in-charge. Sqm 143.85 143.85 117.45 False None None False None False 16895.1825 0 4101077 159782 None code33 Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 ltr/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifcations and as per directions of Engineer-in-charge Sqm 297.15 297.15 135.49 False None None False None False 40260.8535 0 4101078 159782 None code34 Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @0.75 ltr/10 m² of approved brand and manufacture to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering and knotting , cost of materials, labour complete as per specifcations and as per directions of Engineer-in-charge. Sqm 7241.85 7241.85 8.1 False None None False None False 58658.985 0 4101079 159782 None code35 Providing and fxing false ceiling at all height including providing and fxing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/m2 (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fxed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fxed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fxed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fxed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fxing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fxed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fxing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and fnishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , fnishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specifcation and also including the cost of making openings for light fttings, grills, diffusers, cutouts made with frame of perimeter channels suitably fxed, all complete as per drawings, specifcation and direction of the Engineer in Charge but excluding the cost of painting board Fully Perforated Gypsum Plaster Board of size 1200 x 2400x12.5 mm having approx. 15 % perforated area with perforation size and pattern as approved by the Engineer- in-charge and as per manufacturer's specification, with all 4 side tapered and backed by acoustical tissue with NRC value not less than 0.60 Complete as per direction of Engineer in charge. Sqm 1387.05 1387.05 43.99 False None None False None False 61016.3295 0 4101080 159782 None code36 Providing and supplying cupboard shutter with 19mm thick one side Architect recommended decorative laminate (1mm thick) and other side balancing lamination(preferably white) on factory pressed BWP grade marine ply as per IS 710 of approved brand complete as per direction of engineer in-charge.(Payment for providing and fixing auto closing hinges shall be paid separately) Complete as per direction of Engineer in charge. Sqm 3108.0 3108.0 40.9 False None None False None False 127117.2 0 4101081 159782 None code37 Labour & installation charges for BWP ply:BWR ply:HDHMR: MDF & Particle board work of any thickness applicable for all types of work Complete as per direction of Engineer in charge. Sqm 2100.0 2100.0 40.9 False None None False None False 85890.0 0 1727517857000 0 None None Buildings ELECTRIFICATION 54456.15 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 4101082 159783 None code01 Supplying and fixing of PVC casing and capping on the wall or ceiling using necessary materials like bends, screws at an interval of 300mm …. etc. as required. 25mm complete as per direction of the Engineer-in-charge of the work Mtr 36.75 36.75 80.0 False None None False None False 2940.0 0 4101083 159783 None code02 Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit / casing capping using 1100V grade, COPPERconductor flexible multistrand FRLS PVC insulated, 2X1.5Sq.mm Cable confirming to the GTP without switch, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block complete for each outlet. GROUP A Short point upto 3Mtr from tapping point to out let via switch box complete as per direction of the Engineer-in-charge of the work Point 299.25 299.25 6.0 False None None False None False 1795.5 0 4101084 159783 None code03 Medium point above 3Mtr upto 6Mtr from tapping point to out let via switch box complete as per direction of the Engineer-in-charge of the work Point 413.7 413.7 3.0 False None None False None False 1241.1 0 4101085 159783 None code04 Long point above 6Mtr upto 10Mtr from tapping point to out let via switch box complete as per direction of the Engineer-in-charge of the work Point 598.5 598.5 1.0 False None None False None False 598.5 0 4101086 159783 None code05 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS694: 1990 & confirming to GTP of GROUP A. 1.5 sqmm complete as per direction of the Engineer-in-charge of the work Mtr 27.3 27.3 50.0 False None None False None False 1365.0 0 4101087 159783 None code06 2.5 sqmm complete as per direction of the Engineer-in-charge of the work Mtr 44.1 44.1 80.0 False None None False None False 3528.0 0 4101088 159783 None code07 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 8Way complete as per direction of the Engineer-in-charge of the work Each 274.05 274.05 4.0 False None None False None False 1096.2 0 4101089 159783 None code08 10-12Way complete as per direction of the Engineer-in-charge of the work Each 334.95 334.95 8.0 False None None False None False 2679.6 0 4101090 159783 None code09 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 8 Module complete as per direction of the Engineer-in-charge of the work Each 298.2 298.2 4.0 False None None False None False 1192.8 0 4101091 159783 None code10 10-12 Module complete as per direction of the Engineer-in-charge of the work Each 361.2 361.2 8.0 False None None False None False 2889.6 0 4101092 159783 None code11 Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293 GROUP A. 6 Amps one way Switch complete as per direction of the Engineer-in-charge of the work Each 107.1 107.1 15.0 False None None False None False 1606.5 0 4101093 159783 None code12 6Amps 3 way Socket complete as per direction of the Engineer-in-charge of the work Each 179.55 179.55 4.0 False None None False None False 718.2 0 4101094 159783 None code13 Stepped fan Regulator complete as per direction of the Engineer-in-charge of the work Each 374.85 374.85 3.0 False None None False None False 1124.55 0 4101095 159783 None code14 32 Amps Dp switch complete as per direction of the Engineer-in-charge of the work Each 342.3 342.3 2.0 False None None False None False 684.6 0 4101096 159783 None code15 Supplying & Fixing of 70-150 W lamp holder 2 Pin complete as per direction of the Engineer-in-charge of the work Each 66.15 66.15 30.0 False None None False None False 1984.5 0 4101097 159783 None code16 Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers. 16Amps complete as per direction of the Engineer-in-charge of the work Each 164.85 164.85 2.0 False None None False None False 329.7 0 4101098 159783 None code17 Supplying and fixing of Shunt trip suitable for MCCB.CBCT. complete as per direction of the Engineer-in-charge of the work Each 1788.15 1788.15 1.0 False None None False None False 1788.15 0 4101099 159783 None code18 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 5-32 Amps SP complete as per direction of the Engineer-in-charge of the work Each 435.75 435.75 2.0 False None None False None False 871.5 0 4101100 159783 None code19 Supplying and fixing of 5'-80 W of T8 Fluorescent Tube with 54W power consumption with low 3mg Mercury content less phosphor coating Operating voltage range from 180V to 265V, 50Hz AC power Supply. complete as per direction of the Engineer-in-charge of the work Each 546.0 546.0 10.0 False None None False None False 5460.0 0 4101101 159783 None code20 Supplying of Ceiling Fan with Capacitor rating As per guideline of BEE 5 star rating and IS:374/79 and also comply with IS:1709/1984 with latest amendment, Rated voltage 220 V/ 50 Hz, Rated power input 48 W +/- 10 %, Rated current As per IS:374/79, Rated power factor 0.9 lagging(min), Rated speed 350 +/- 10% RPM, Rated air delivery 210 +/- 10% Cubic Meter Minimum, Rated service value 4.2 CMM / Watt, Three Blades of blade leaf 1.05mm thick Aluminium Alloy sheet, Class B motor insulation, Bearing Two ball bearings, Top 6202, Bottom 6201 , as per IS specification, Motor wdg. Temp rise Shall not exceed 75 deg C over and ambient of 40 0C by resistance method at 245 Volts, Insulation resistance Shall not be less than Two Mega Ohms (2 M Ohms), Leakage current Should not exceed 210 Micro Amp, Power input, watt& current , Air Delivery & Fan Speed as per IS:374/1979 with latest amendment, 2 year manufacturer Warranty 48" Sweep 5 Star (1200 mm) complete as per direction of the Engineer-in-charge of the work Each 2810.85 2810.85 3.0 False None None False None False 8432.55 0 4101102 159783 None code21 Fixing all types and all capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling / rafters / girders using 23/0.0076” twin twisted PVC insulated wires, required Nos of round blocks and clamps. (on wall/ceiling/rafter/girders complete as per direction of the Engineer-in-charge of the work Each 128.1 128.1 35.0 False None None False None False 4483.5 0 4101103 159783 None code22 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system ofwiring with specified IS-694:confirming to latest amendments. 10sqmm complete as per direction of the Engineer-in-charge of the work Mtr 175.35 175.35 25.0 False None None False None False 4383.75 0 4101104 159783 None code23 Supplying and fixing 32Amps security and energy saving DP switch with key tag suitable to operate on 230 Volts, 50Hz AC supply & completely wired on existing box complete as per direction of the Engineer-in-charge of the work Each 678.3 678.3 1.0 False None None False None False 678.3 0 4101105 159783 None code24 LT AC Single Phase 2 Wire, 5-30 Amps Smart Energy Meter, Class 1.0 Accuracy with RF Communication Module complete as per direction of the Engineer-in-charge of the work Each 2584.05 2584.05 1.0 False None None False None False 2584.05 0
generalCriterionList	createdTs version createdDate modifiedDate criterionType description tenderEligibilityCriterionDocumentList 1727517858000 0 None None ELIGIBILITY Tenders from Joint ventures are not acceptable. None 1727517858000 1 None None ELIGIBILITY Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka None 1727517858000 1 None None ELIGIBILITY It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission. None 1727517858000 0 None None ELIGIBILITY It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission. None 1727517858000 0 None None ELIGIBILITY EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection. None 1727517858000 1 None None ELIGIBILITY The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of e-Procurement portal due to internet connectivity issues and technical glitches at bidders end. None 1727517858000 1 None None ELIGIBILITY EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection. None 1727517858000 1 None None ELIGIBILITY Bidder shall pay Contract Management Module processing fees of 0.025% of the contact value (Min Rs.500/- & Max Rs.7500/-) soon after contract has been issued to bidder. None 1727517858000 1 None None ELIGIBILITY For Details Refer Tender Notification And Conditions In The Bid Documents. None 1727517858000 1 None None ELIGIBILITY Acceptence / Cancellation of the works are reserved by under signed without any reasons for the same. None 1727517908000 0 None None ELIGIBILITY Executive Engineer PRED Chikodi has authority to accept or reject any tender without assigning reason. None 1727517911000 0 None None ELIGIBILITY Corrigendum / modifications / correction, if any, will be published in the website only. None 1727517915000 0 None None ELIGIBILITY To qualify for award of this contract, each tenderer should give all details and documents as per Technical and Financial bid attached to this tender. None 1727517918000 0 None None ELIGIBILITY Incomplete / conditional tenders will not be accepted. None 1727517920000 0 None None ELIGIBILITY Tenderer must submit his present accurate postal address and phone / cell phone number None 1727517923000 0 None None ELIGIBILITY The tender may be cancelled at any stage without assigning any reason None 1727517927000 0 None None ELIGIBILITY Any objection regarding the tender must be submitted directly to Executive Engineer , not in inward. None 1727517930000 0 None None ELIGIBILITY For interpretations of clauses, conditions, spelling mistakes, etc., decision of Executive Engineer, PRED, Chikodi is final. None 1727517933000 0 None None ELIGIBILITY Successful bidder submitting bids below the amount put to tender will be regularized to submit the difference amount in the form of FDR/TDR/DD/Pledge on the name of EE PRED Chikodi within 20 days from the date of receiving the letter of acceptance. additional security paid for unbalanced tenders Failing which EMD will be forfeited and further action will be taken as per G O No FD PCL 2008 Bangalore Dated 14/10/2008. None 1727517936000 0 None None ELIGIBILITY Work shall be executed as per KTPP Act & kw Tender Conditions. None
preQualCriterionList	None
technicalCriterionList	None
tenderCriterionDocumentList	documentName optional documentTypeText Contractor KPWD Civil Registration Certificate True Technical Bid Annual Turn Over Certificate Rs.16.93 Lakhs from 2019-20 to 2023-24 True Technical Bid Similar Nature of Work Done Rs.9.00 Lakhs Certificate True Technical Bid GST Registration True Technical Bid
tenderWorkLocationList	tenderSubEstimateName districtName taluqName loksabhaContName assemblyContName locationDescription latitudeDegrees latitudeMinutes latitudeSeconds longitudeDegrees longitudeMinutes longitudeSeconds Buildings Belagavi Chikodi Chikkodi CHIKKODI (SC) ANKALI VILLAGE IN CHIKKODI TALUKA None None None None None None
tenderAddress	None
tenderRecallDTO	None