| 1727413964000 | 0 | None | None | Other Works | Construction Park Fensing And Other Works In Ward No 18 At Kannika Parameshawari Temple Behind 2 Further Devolpment Works In Sujata Sambulingappa Park At Ward No 03 3 Construction Of Playing Ground Works At Ward No 03 Old H B Halli Govt Primary School | 2274296.84 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 4089400 | 159255 | None | HBHalli 001 | Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications , including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work.(Volume-I(CSR 2023-24,I.No.1.12,P.No.7) In all kinds of soils upto 300 mm depth | Cum | 99.75 | 99.75 | 54.0 | False | None | None | False | None | False | 5386.5 | 0 | | 4089401 | 159255 | None | HBHalli 002 | Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour, rolling ,water,all materials,usage& all other appurtenaces required to complete the work. (SCHEDULE OF RATES FOR ROAD AND BRIDGE WORKS 2023-24 Volume-III P.No.26 I.No.4.17) | Cum | 497.7 | 497.7 | 54.0 | False | None | None | False | None | False | 26875.8 | 0 | | 4089402 | 159255 | None | HBHalli 003 | Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver/grader in sub-base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density (SCHEDULE OF RATES FOR ROAD AND BRIDGE WORKS 2023-24 Volume-III P.No.26 I.No.4.17) | Cum | 2686.95 | 2686.95 | 38.0 | False | None | None | False | None | False | 102104.1 | 0 | | 4089403 | 159255 | None | HBHalli 004 | Providing and laying 60mm thick factory made cement concrete paver block of approved shape and colour of M -30 grade made of C&D waste by block making machine with vibratory compaction laid in required pattern and including over 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge..(Volume-III (CSR 2023-24, I.No.9.25, P.No.63) | Sqm | 1121.4 | 1121.4 | 380.0 | False | None | None | False | None | False | 426132.0 | 0 | | 4089404 | 159255 | None | HBHalli 005 | Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications ( Volume-I (CSR 2023-24, I.No.2.2.1 P.No.15) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates | Cum | 6931.42 | 6931.42 | 1.2 | False | None | None | False | None | False | 8317.704 | 0 | | 4089405 | 159255 | None | HBHalli 006 | Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. In all kinds of soils Depth upto 3 m.( CSR-2023-24 Volume - 1.I no 1.14.1 P.NO 8) | Cum | 107.1 | 107.1 | 14.77 | False | None | None | False | None | False | 1581.867 | 0 | | 4089406 | 159255 | None | HBHalli 007 | Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:4:8 Using 40 mm nominal size graded crushed coarse aggregates. CSR-2023-24 Volume - 1.I no 2.1.2 P.NO 15 | Cum | 5947.2 | 5947.2 | 0.62 | False | None | None | False | None | False | 3687.264 | 0 | | 4089407 | 159255 | None | HBHalli 008 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (CM SR 2023-24/P.No.16/Vol-1/2.4.2) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates | Cum | 6947.11 | 6947.11 | 0.32 | False | None | None | False | None | False | 2223.0752 | 0 | | 4089408 | 159255 | None | HBHalli 009 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (CM SR 2023-24/P.No.16/Vol-1/2.4.2) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates | Cum | 11286.56 | 11286.56 | 0.37 | False | None | None | False | None | False | 4176.0272 | 0 | | 4089409 | 159255 | None | HBHalli 010 | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery,labour,cleaning,straightening,cutting,bending,hooking,laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. (All other type of structures) CSR-2023-24 Volume - 1.I no 2.11 h P.NO 18 | Tonne | 82961.55 | 82961.55 | 0.03 | False | None | None | False | None | False | 2488.8465 | 0 | | 4089410 | 159255 | None | HBHalli 011 | Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver/grader in sub-base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. Wet Mix Macadam (Plant Mix Method).(Volume-III (CSR 2023-24, I.No.4.17, P.No.26) | Sqm | 2686.95 | 2686.95 | 5.94 | False | None | None | False | None | False | 15960.483 | 0 | | 4089411 | 159255 | None | HBHalli 012 | Providing and laying 60mm thick factory made cement concrete paver block of approved shape and colour of M -30 grade made of C&D waste by block making machine with vibratory compaction laid in required pattern and including over 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge..(Volume-III (CSR 2023-24, I.No.9.25, P.No.63)(Volume-III (CSR 2023-24, I.No.4.17, P.No.26) | Sqm | 1121.4 | 1121.4 | 59.4 | False | None | None | False | None | False | 66611.16 | 0 | | 4089412 | 159255 | None | HBHalli 013 | Supplying and fixing M15 grade precast cement concrete Kerb stones. (600 x 300 x 150 mm ) Volume-III (CSR 2023-24 ,I.NO:8.42.3, P.NO:A-19) | Mtr | 90.3 | 90.3 | 114.0 | False | None | None | False | None | False | 10294.2 | 0 | | 4089413 | 159255 | None | HBHalli 014 | Providing Water based glossy paint (Green certified product) to Kerb Stones as per IS 164:2015 technical specifications including cleaning & surface preparation.Volume-III (CSR 2023-24 ,I.NO:8.52, P.NO:78) | Sqm | 271.95 | 271.95 | 29.7 | False | None | None | False | None | False | 8076.915 | 0 | | 4089414 | 159255 | None | HBHalli 015 | Providing and fixing 1.8 m high GI barbed wire fencing with 2.4 m angle iron posts 50 mm x 50 mm x 6 mm placed every 3 m center to center founded in M15 grade cement concrete, 0.6 metre below ground level, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with 12 horizontal lines and 2 diagonals interwoven with horizontal wires, fixed with GI staples, turn buckles etc complete as per clause 808 (PWD Common SR 2021-22, Vol-3, P.No-57, I.No-8.20) | Mtr | 570.15 | 570.15 | 539.0 | False | None | None | False | None | False | 307310.85 | 0 | | 4089415 | 159255 | None | HBHalli 016 | Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.(PWD SR For Buildings. CSR-2023-24 Volume - 2 .I no 11.16.1 P.NO 82 | Kg | 142.8 | 142.8 | 181.13 | False | None | None | False | None | False | 25865.364 | 0 | | 4089416 | 159255 | None | HBHalli 017 | Fabricating, providing and erecting in poiston of M S Ornamental security Grill Gate without hot dip using 75 x 12mm M S Flat for alround frame work with verticals at the centre and horizontal centere support M S Square of 20 x20 mm of different heights as shown in the drawing are to be fixed at 16 cms C/C for suqare bars of full height and at 8cms C / C for bottom rods providg ornamental C I Designers at the botom and C I arrows inthe midle and top. The entire frame work is to be fixed by means of expansion bolts to the brick pillars with necesary drillling holes. the work includes providng two coats of enamel painting over one coatr of red lead ready mix primer coat etc complete cost of all labour, painting, erection charges using hoist pulleycranes with all lead and lift, loading, transporting and unloading using hoist pulley cranes, scaffolding charges and all other incidental charges required for successful completion fo the work as per specification and drawings (P. No. 43 / I. No. 7.31 of CSR 2018-19) | Kg | 138.6 | 138.6 | 118.8 | False | None | None | False | None | False | 16465.68 | 0 | | 4089417 | 159255 | None | HBHalli 018 | Supply and fixing of chiltern Play Equipment Maxima N Swing Inverted U shaped structural posts of height 2.31 m are to be schedule HOT DIP Galvanized steel with a 114mm OD and 2.2mm (wall) thickness of the tubing. Toprail at height 7.31 m and Dia 114 mm shall be an all-robotic welded unit, fabricated from 114 O.D. Plastic Components such as swing seats super thick plastic shall be animated and shall be rotationally molded from antistatic, copoymer, virgin linear low density UV stabilized polyethylene, with color molded in and minimum thickness of 6 - 8mm. The rates are to be inclusive of supply and installation at site. Inclusive of All Taxes and Transportation Charges | Each | 188495.0 | 188495.0 | 2.0 | False | None | None | False | None | False | 376990.0 | 0 | | 4089418 | 159255 | None | HBHalli 019 | Supply and fixing of childern Play Equipment Monker Bar VFM
Support posts of height 1.82 m are to be schedule Galvanized steel with a 60 mm OD (Outer Diameter).All the posts are to be finished with a baked on powder coat finish. Handrail of size 1.3 m and Dia 48 mm shall be an welded unit, fabricated from 48 O.D. galvanized steel pipes with a baked on powder coating finish. Bolts, nuts, screws, washers and etc used for assembly shall be stainless steel 304 grade and shall be of tamper resistant stainless steel. Electro - statically applied polyester powder must have a tough finish with maximum durability. The rates are to be inclusive of supply and installation at site. Inclusive of All Taxes and Transportation Charges | Each | 94710.0 | 94710.0 | 1.0 | False | None | None | False | None | False | 94710.0 | 0 | | 4089419 | 159255 | None | HBHalli 020 | Supply and fixing of childern Play Equipment Four Seater Seesaw :
SPECIFICATIONS The See Saw consists of 2 poles of Dia 114mm and thickness of 2.5mm which balances the horizontal rod at the center which is of size 3110 mm length and Dia 114 mm. It consists of 4 seats which is made of LLDPE virgin plastic of size 305mm X 213 mm X 125 mm. The rates are to be inclusive of supply and installation at site. Inclusive of All Taxes and Transportation Charges | Each | 107240.0 | 107240.0 | 1.0 | False | None | None | False | None | False | 107240.0 | 0 | | 4089420 | 159255 | None | HBHalli 021 | Supply and fixing of childern Play Equipment Two seater seesaw :
The See Saw consists of 2 poles of Dia 114mm and thickness of 2.5mm which balances the horizontal rod at the center which is of size 3110 mm length and Dia 114 mm. It consists of 2 seats which is made of LLDPE virgin plastic of size 305mm X 213 mm X 125 mm. The rates are to be inclusive of supply and installation at site. Inclusive of All Taxes and Transportation Charges | Each | 83478.0 | 83478.0 | 1.0 | False | None | None | False | None | False | 83478.0 | 0 | | 4089421 | 159255 | None | HBHalli 022 | Supply and fixing of childern Play Equipment Hexa climber :
Upright structural posts of height 2.6 m are to be schedule HOT DIP Galvanized steel with a 114mm OD and 2.2mm (wall) thickness of the tubing. Top rail Bars Dia 32 mm are all robotic welded fabricated from 48MM O.D. galvanized steel pipes for the outer bars and 32 mm 0D galvanized steel for the inner parallel bars with a baked on powder coat finish. Net Climber of size 2.1 m are all robotic welded fabricated from 32 O.D. galvanized steel pipes for the outer pipes and 2Smm O.D. galvanized steel for the inner parallel bars with a baked on powder coat finish. The rates are to be inclusive of supply and installation at site. Inclusive of All Taxes and Transportation Charges | Each | 215400.0 | 215400.0 | 1.0 | False | None | None | False | None | False | 215400.0 | 0 | | 4089422 | 159255 | None | HBHalli 023 | Supply and fixing of childern Play Equipment Creppy Crawly climber: The wavey support bars are of height 1.5 m are to be schedule HOT DIP Galvanized steel with a 48 mm OD, Powder coatings used is Akzo Nobel’s. The finished products have the following typical characteristics: 0.Smm thickness, oven cured between 191oC and 220oC, to achieve Flexibility, Impact, Salt Spray (Corrosion) Resistance, Hardness, and Adhesion. All post caps are to be cast from aluminum which is pretreated, cured and sandblasted, 1I4mm diameter, with a baked on powder coat finish.Handrail of height Dia 32 mm shall be an all-robotic welded unit, fabricated from 32 O.D. galvanized steel pipes with a baked on powder coating finish. The Electro- statically applied polyester powder has a tough finish with maximum durability using AkzoNobel INTERPON paints application, and dual zone cure oven to a thickness of 0.Smm thickness, oven cured between 191oC and 220oC. Exposed hardware shall be covered with ultra violet stabilized plastic safety caps as per EN1176 standards as a safety feature against protruding hardware, aesthetic pleasing against ugly exposed hardware and prevention against vandalism as well.The rates are to be inclusive of supply and installation at site. Inclusive of All Taxes and Transportation Charges | Each | 222105.0 | 222105.0 | 1.0 | False | None | None | False | None | False | 222105.0 | 0 | | 4089423 | 159255 | None | HBHalli 024 | Supply and fixing of childern Play Equipment Merry go round - DX : The Merry go round consists of a round platform which is made of galvanized steel and has a thickness of 2.5 mm. It is also power coated with the thickness of 2.S mm. It is of Dia 1210 mm. It has 3 inverted “L” shaped handrails which is made of Galvanized steel 20 and of dimensions as 474 mmx 81a mm. It has thickness of Dia 32 mm. The 3 handrails are separated exactly. All the 3 handrails are connected to the Centre with the help of a rod which is also made of Galvanized steel and of Oia 48 mm and height 815 mm. The rates are to be inclusive of supply and installation at site. Inclusive of All Taxes and Transportation Charges | Each | 85040.0 | 85040.0 | 1.0 | False | None | None | False | None | False | 85040.0 | 0 | | 4089424 | 159255 | None | HBHalli 025 | Supply and fixing of childern Play Equipment Puppy dog Rider / Elephant rider / Horse rider: : HDPE of size 0.83 m x 0.31 m x 0.87 m, Plastic Components (super thick plastic] shall be rotationally molded from antistatic, copolymer, virgin linear low density UV stabilized polyethylene, with "color molded" in not "added in". All rotational molding is carried out in state of the art, precision, Li axial roto moulding machines which helps achieve guaranteed uniform wall thickness, seamless joints, accurate process control, one part construction to make it stress free. Specialized connectors such as clamps and couplings are to be cast from aluminium which is pre- treated, and cured, with a bakEd on powder coat finish.The rates are to be inclusive of supply and installation at site. Inclusive of All Taxes and Transportation Charges | Each | 55776.0 | 55776.0 | 1.0 | False | None | None | False | None | False | 55776.0 | 0 |
|