createdTs	None
version	None
createdDate	None
modifiedDate	None
noticeInvitingTenderDTO	createdTs 1727423613499 version 3 createdDate None modifiedDate None tenderType RFQ evaluationType ONE_COVER evaluationTypeText One Cover invitingStrategy OPEN invitingStrategyText Open taxType INCLUSIVE_TAX tenderFee 500.00 emd 31700.00 bidValueType ITEM_WISE bidValueTypeText Item wise tenderReceiptClose 16-10-2024 16:00:00 tenderQueryClose 14-10-2024 16:00:00 technicalBidOpen None publishedDate 30-09-2024 10:50:35 publishedByPost RDPR_EE_DIV_GAD publishedByUser KPE16679 - VIJAYKUMAR MADIVALAPPA bidValidityPeriod 90 noOfCalls 1 preBidMeetingDate None preBidMeetingYn False preQualificationBidOpen None denominationType RUPEES denominationTypeText Rupees retenderedYn None percentageRateTypeText None contactPerson M P MANJUNATH splitEmdRequiredYn False emdBankGuarantee None emdCash None bgValidityPeriod None hideWeightage None multipleCurrencySelectionAllowedYn False isTechWeightageAllowed False highestBidderSelection False isVariableEmdAllowed None qcbsTenderYn None itemwiseEmdRequiredYn None sampleSubmissionDate None officeNumber 08372238035 mobileNumber None tenderSupplierList None
tenderSchedule	createdTs 1727423613536 version 6 createdDate None modifiedDate None tenderNumber RDPR/2024-25/OW/WORK_INDENT3662 title Construction of Anganavadi centre Gogeri village In Ron Taluk description Construction of Anganavadi centre Gogeri village In Ron Taluk category WORKS categoryText Works ecv 1267440.73 deptName Rural Development and Panchayat Raj Department status PUBLISHED statusText Published remarks None csrValue None ecvtenderYn True location 845 locationName RDPR Division Office Gadag provisionalAmount 1500000.0 groupOverheadTotal None fileNumber GOGERIANGANAVADI
tenderSubEstimateList	createdTs version createdDate modifiedDate workCategoryName subEstimateName estimateTotal itemList 1727423614000 0 None None Other Works Construction of Anganavadi centre Gogeri village In Ron Taluk 1267440.73 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 4093242 159408 None code01 Earth work excavation by manual means for drains,canals, waste weir draft, approach channels, key trench, foundation of Bridges and such similar works, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, excavated surface leveled and sides neatly dressed disposing off or leveling the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage & other appurtenances required to complete the work. In ordinary/soft rock without blasting upto 1.5 m depth Cum 229.0 229.0 78.84 False None None False None False 18054.36 0 4093243 159408 None code02 Filling in foundation with granite/trap broken metal 100mm and down size, with approved sand Including hand packing, ramming watering, Including cous of all materials and labour with lead upto 50m and lift of 1.5m complete as per specification. Cum 2561.0 2561.0 19.66 False None None False None False 50349.26 0 4093244 159408 None code03 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates Cum 5831.7 5831.7 17.65 False None None False None False 102929.505 0 4093245 159408 None code04 Providing Coursed rubble masonry (first sort) with hard stone in foundation and plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 5543.0 5543.0 19.38 False None None False None False 107423.34 0 4093246 159408 None code05 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. Cum 204.0 204.0 18.31 False None None False None False 3735.24 0 4093247 159408 None code06 Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 6564.8 6564.8 8.45 False None None False None False 55472.56 0 4093248 159408 None code07 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 7418.4 7418.4 15.47 False None None False None False 114762.648 0 4093249 159408 None code08 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 8963.9 8963.9 0.36 False None None False None False 3227.004 0 4093250 159408 None code09 Providing Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work including straightening,cutting, bending, placing in position, binding and anchoring to adjacent members whereever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. (The laps and wastages shall not be measured separately) Kg 92.0 92.0 1794.16 False None None False None False 165062.72 0 4093251 159408 None code10 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. Cum 6696.0 6696.0 41.34 False None None False None False 276812.64 0 4093252 159408 None code11 Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 274.0 274.0 274.36 False None None False None False 75174.64 0 4093253 159408 None code12 Providing and laying Polished Glazed Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately)..item no 9.22.2 page no 62 flooring Size of Tile 600x600 mm Cum 1261.0 1261.0 35.48 False None None False None False 44740.28 0 4093254 159408 None code13 Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps ), but including cost of materials, labour, usage charges complete as per specifications. Sqm 75344.0 75344.0 0.56 False None None False None False 42192.64 0 4093255 159408 None code14 Providing and fixing in position fully panelled Matti/Nandi wood shutters for doors with , stiles and rails of 30mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. (excluding cost of fixtures) Sqm 3860.0 3860.0 12.96 False None None False None False 50025.6 0 4093256 159408 None code15 Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 41.0 41.0 34.73 False None None False None False 1423.93 0 4093257 159408 None code16 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 130.0 130.0 34.73 False None None False None False 4514.9 0 4093258 159408 None code17 Fully Perforated Gypsum Plaster Board of size 1200 x 2400x12.5 mm having approx. 15 % perforated area with perforation size and pattern as approved by the Engineer- in-charge and as per manufacturer's specification, with all 4 side tapered and backed by acoustical tissue with NRC value not less than 0.60 Sqm 1175.0 1175.0 2.4 False None None False None False 2820.0 0 4093259 159408 None code18 Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per m2 including pointing in white cement mixed with pigment of matching shade complete. Cum 964.0 964.0 12.67 False None None False None False 12213.88 0 4093260 159408 None code19 Providing and fixing chlorinated polyvinyl chloride (CPVC) Pipe having thermal stability for hot & cold water supply including all cpvc plain & brass threated fittings including fixing the pipe with clamps at,. M spacing this including joining of pipes & fitting with one step cpvc solvent cement and testing of joints complete as per direction of engineer in charge, 25mm nominal dia pipes m 316.0 316.0 60.0 False None None False None False 18960.0 0 4093261 159408 None code20 KSRB 13-11.1: Providing and placing on terrace, polyethylene water storage tanks as per IS 12701 : 1996 with manhole lid and suitable locking arrangements, making holes of suitable diameter for inlet, outlet and over flow pipes, including cost of all materials, labour, transport charges, HOM of equipments and testing complete as per specifications (For 1000 litre capacity) Specification No.KBS Cum 8890.35 8890.35 0.5 False None None False None False 4445.175 0 4093262 159408 None code21 Providing and fixing chlorinated polyvinyl chloride (CPVC) Pipe having thermal stability for hot & cold water supply including all cpvc plain & brass threated fittings including fixing the pipe with clamps at,. M spacing this including joining of pipes & itting with one step cpvc solvent cement and testing of joints complete as per direction of engineer in charge, 50mm nominal dia pipes Each 767.0 767.0 5.0 False None None False None False 3835.0 0 4093263 159408 None code22 Rewinding of submergible pumpset with copper winding wiress of appropriate guage, as per specifications and / or directions of the departmental officials, including all materials, labour, equipment and testing. For all types of submergible pumpsets etc, (with guarantee period not less than 6 months) for all types of submergible pumpsets upto 3.0 H.P. Cum 2710.0 2710.0 1.0 False None None False None False 2710.0 0 4093264 159408 None code23 Lettering with black Japan paint of approved brand and manufacture to give an even shade including preparing the surface after thoroughly cleaning the surface to remove all dirt, dust and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 3.0 3.0 3000.0 False None None False None False 9000.0 0 4093265 159408 None code24 Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6kg per m2 to achieve final DFT (dry film thickness) of 1mm including prime coat of epoxy primer @150 g per m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification & with a 10 years warranty on product & work from certified manufacturers as per the direction of the Engineer In charge. Pan 745.0 745.0 55.21 False None None False None False 41131.45 0 4093266 159408 None code25 KSRB 13-3 : Providing and fixing white vitreous china clay, water closet Indian type (Squatting pan) of size 580mm with footrests, 100mm S or P trap, (approved make) cutting and making good the wall and floor wherever required, including cost of materials, labour complete as per specification Pan 1331.0 1331.0 1.0 False None None False None False 1331.0 0 4093267 159408 None code26 KSRB 11-11.8 : Providing and fixing white vitreous china clay, surgeon type wash basin size 660*460mm with a pair of 15mm C.P brass pillar taps with pair of elbow levers, C.I/M.S brackets, 32 mm C.P. brass waste of standard pattern, painting of fittings and brackets, cutting and making good the wall and floor wherever required, including cost of materials, labour complete as per specifications. Pan 4605.0 4605.0 1.0 False None None False None False 4605.0 0 4093268 159408 None code27 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 ltr/10 m² over and including one coat of Special primer applied @ 0.75 ltr /10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Cum 118.0 118.0 173.72 False None None False None False 20498.96 0 4093269 159408 None code28 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Short point upto 3 mts from tapping point to out let via switch box Each 157.0 157.0 2.0 False None None False None False 314.0 0 4093270 159408 None code29 Medium point above 3 mts upto 6mts from tapping point to outlet via switch box Each 245.0 245.0 2.0 False None None False None False 490.0 0 4093271 159408 None code30 Long point above 6 mts upto 10 mts from tapping point to outlet via switch box Each 368.0 368.0 2.0 False None None False None False 736.0 0 4093272 159408 None code31 NOTE:The length of light points where ever exceding the specified length,the additional length quantity is considred in the wiring for lighting/power cicuits section./ Supplying and flush mounting powder coated metal box suitable for mounding modular switch plates. The box should be firmly flush mounted after due groove cutting in brick / stone / cc wall 1 - 3Way Each 93.0 93.0 2.0 False None None False None False 186.0 0 4093273 159408 None code32 4 - 5Way Each 103.0 103.0 2.0 False None None False None False 206.0 0 4093274 159408 None code33 6 Way Each 123.0 123.0 4.0 False None None False None False 492.0 0 4093275 159408 None code34 8 Way Each / BW 142.0 142.0 2.0 False None None False None False 284.0 0 4093276 159408 None code35 10 / 12 Way Each 162.0 162.0 1.0 False None None False None False 162.0 0 4093277 159408 None code36 Supplying and fixing one of 230 volts Ding dong bell and a flush type bell push with gang box fixed on necessary wooden or rawl plugs using NF screws Ding Donng bell Each 216.0 216.0 1.0 False None None False None False 216.0 0 4093278 159408 None code37 Concealed Conduit System Supplying heavy gauge PVC conduit pipe ... mm dia ..mm thick with suitable size bends / metal / PVC junction boxes adhesive paste etc..and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wires where ever necessary 20 mm dia 2 mm thick Each 39.0 39.0 40.0 False None None False None False 1560.0 0 4093279 159408 None code38 Groove Cutting in Wall Supplying heavy gauge PVC conduit pipe ... mm dia ..mm thick with bends metal junction boxes adhesives paste etc and bracing U or J hooks and cement plastering upto the surface of the trick level and run with 18 SWG Gi fish wire run through out the conduit wherever necessary 20 mm dia 2 mm thick Mtr 50.0 50.0 40.0 False None None False None False 2000.0 0 4093280 159408 None code39 Supplying and fixing PVC/metal conduit deep junction box . 19/20mm deep junction box Each 42.0 42.0 15.0 False None None False None False 630.0 0 4093281 159408 None code40 25mm deep junction box Each 46.0 46.0 5.0 False None None False None False 230.0 0 4093282 159408 None code41 WIRING FOR Lighting/Power Circuits FRLS PVC insulated 1100V grade, multistrand copper with low conductor resistance single core wire in open or concealed wiring system with specified IS -694:1990 & cofirming to Latest amendments. 1.5 Sq.mm Mtr 20.0 20.0 50.0 False None None False None False 1000.0 0 4093283 159408 None code42 2.5 sq.mm Mtr 31.0 31.0 30.0 False None None False None False 930.0 0 4093284 159408 None code43 4 sq.mm WIRING FOR Lighting Circuits using 2runs 2.5sq mm and 1x1.5sqmm ,POWER CIRCUITS FOR 16 A PLUG, using 2runs 4sq mm and 1x2.5sqmm ,Lighting DB, using 4runs 6sq mm and 1x2.5sqmm ,Power DB , using 4runs 10sq mm and 1x4sqmm Mtr 44.0 44.0 15.0 False None None False None False 660.0 0 4093285 159408 None code44 MCB DB Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase / 3 phase / single/ DOUBLE door with powder coated painting etc.Made out of 14 SWG MS enclosure. 8Way SP & N Each 1421.0 1421.0 1.0 False None None False None False 1421.0 0 4093286 159408 None code45 Supplying and fixing 6 to 32 Amps SP miniature circuit breaker 10 Ka,with C curve, on the existing MCB distribution board using necessary fixing materials and wiring complete as required Each 425.0 425.0 3.0 False None None False None False 1275.0 0 4093287 159408 None code46 Supplying and fixing 40A DP MCB miniature circuit breaker 10 Ka,with C curve,on the existing MCB distribution board using necessary fixing materials and wiring complete as required Each 1309.0 1309.0 1.0 False None None False None False 1309.0 0 4093288 159408 None code47 Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V up to 300mA sensitivity on existing wood/ panel board.40Amps 2 pole Each 3773.0 3773.0 1.0 False None None False None False 3773.0 0 4093289 159408 None code48 Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 1.5 sq.mm Each 3.0 3.0 10.0 False None None False None False 30.0 0 4093290 159408 None code49 2.5 sq.mm Each 4.0 4.0 20.0 False None None False None False 80.0 0 4093291 159408 None code50 4 sq.mm Each 7.0 7.0 40.0 False None None False None False 280.0 0 4093292 159408 None code51 6 sq.mm Each 7.0 7.0 10.0 False None None False None False 70.0 0 4093293 159408 None code52 Supplying and fixing of Class A (medium duty) GI Pipe of wall thickness not less than 3.25mm on pole/wall/drain crossing with necessary clamping arrangements for UG cable of 1.1KV class. 40mm Each 328.0 328.0 1.0 False None None False None False 328.0 0 4093294 159408 None code53 Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc using 40mm dia 2.9mm thick 2.5 mtr long GI pipe with GI funnel with mesh and suitable size reducer fixed on the top of the earth electrode. The funnel should be enclosed in a CC chamber of 400x400x400mm with a cast iron cover. The earth electrode shall have staggered holes of 12mm dia and the electrode should be covered 150mm alround with alternate layers of salt and charcoal from the bottom of the CC chamber. The connection from the electrode is to be established through GI strip using GI bolts and nuts. Each / BW 4067.0 4067.0 1.0 False None None False None False 4067.0 0 4093295 159408 None code54 Supplying and running of GI Strip of size 25 x 3mm for grounding connections using necessary fixing materials as required Each 74.0 74.0 10.0 False None None False None False 740.0 0 4093296 159408 None code55 ELECTRICAL FIXTURES Supplying of ......feet - PVC Batten with integrated LED tube.....W with high quality diffuser with Life of 25000 burning hours & 70 lumen maintenance with CRI 80. Power Input: 220-240V @ 50/60Hz Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. LED light fighting 2X 4-20/22watts Each 613.0 613.0 1.0 False None None False None False 613.0 0 4093297 159408 None code56 LED light fighting 4'-20/22watts Each 368.0 368.0 2.0 False None None False None False 736.0 0 4093298 159408 None code57 LED light fighting 2'-9/10watts Each 245.0 245.0 4.0 False None None False None False 980.0 0 4093299 159408 None code58 Supplying exhaust fan of 1440 RPM of 300mm(12") size with Bracket blades complete for light duty suitable to operate on 230V,50Hz, A.C.,supply Each 1176.0 1176.0 2.0 False None None False None False 2352.0 0 4093300 159408 None code59 Fixing all types and all capacities fluorescent / false ceiling /spot light / CFL / LED fitting indoors on the wall / ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires . Required nos of round blocks and clamps Each 108.0 108.0 5.0 False None None False None False 540.0 0 4093301 159408 None code60 Fixing of Wall/ ceiling fan of all capacities and all types to the existing hook together with supplying and fixing a 5 A ceiling rose , necessary length of 23/0.0076 inch PVC insulated twin twisted copper wire and wiring complete Each 147.0 147.0 5.0 False None None False None False 735.0 0 4093302 159408 None code61 Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts and a 5 Amps, ceiling rose with sufficient length of 23/0.0076 inch PVC insulated twin cose wire of approved make Each 392.0 392.0 1.0 False None None False None False 392.0 0 4093303 159408 None code62 Fixing halogen/metal hallide/SVL / IL / LED flood light fitting over existing pole/wall ceiling including clamps,bolts, nuts and wiring using suitable capacity wires complete. Each 172.0 172.0 1.0 False None None False None False 172.0 0
generalCriterionList	createdTs version createdDate modifiedDate criterionType description tenderEligibilityCriterionDocumentList 1727423615000 1 None None ELIGIBILITY Department Registration Details None 1727423615000 1 None None ELIGIBILITY Line of credit 30% to APT amount that is not less than Rupees-3.80 lakhs (Conditional LOC not considered) None 1727423615000 0 None None ELIGIBILITY Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document. None 1727423615000 0 None None ELIGIBILITY It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission. None 1727423615000 0 None None ELIGIBILITY EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection. None 1727423871000 0 None None ELIGIBILITY The tender is through e mode only None 1727423879000 0 None None ELIGIBILITY The rates enumerated in the tender schedule / BOQ are inclusive of all lead and lifts and all other charges to complete the work successfully. None 1727423887000 0 None None ELIGIBILITY The tender may be cancelled at any stage without assigning any reason None 1727423896000 0 None None ELIGIBILITY Tenderer must submit his present accurate postal address and phone / cell phone number None 1727423904000 0 None None ELIGIBILITY Materials to be utilized for the work must be tested in PRED labs and quality control test reports must be enclosed to the bills. Cost of quality control tests must be borne by the contractor None 1727423912000 0 None None ELIGIBILITY Tenderer who is successful in any tender previously, but not submitted security deposit, is not eligible to participate in this tender None 1727423921000 0 None None ELIGIBILITY If any date in tender time table is government holiday, next working day will be considered None 1727423928000 0 None None ELIGIBILITY Executive Engineer PRED Gadag has authority to reject or accept any tender without assigning any reason None 1727423935000 0 None None ELIGIBILITY If the rates Quoted by the contractor is lesser than the amount put to tender, the difference cost should be paid by the contractor through DD/ FDR / NSC in the favour of Executive Engineer. within 20 days of the receipt of the letter of acceptance for unbalanced tenders in accordance with clause 25.5 of ITT and clause 44 of the condition of contract as per G.O.No FD 94 PCL 2008 Bangalore dated 14.10.2008 None 1727423942000 0 None None ELIGIBILITY GST shall be paid to the tendered amount separately. None 1727423948000 0 None None ELIGIBILITY The contractor should provide daily there staff members on site None 1727423956000 0 None None ELIGIBILITY If there is any objection regarding tender, eligibility of contractors, documents etc. The objection must be submitted before last date & time of submission of tender directly to Executive Engineer, PRE Dn, Gadag. (Not in inward). None 1727423963000 0 None None ELIGIBILITY The work subjected to third party inspection and inspection by other govt agencies third party inspection cost is borne by the contractor for the gross amount of the bill third party agency is appointed by the dept None 1727423971000 0 None None ELIGIBILITY Aspiring bidders/ contractors who have not obtained the user ID & Password for participating in E-Proc in PRED may now obtain the same from the website www.kppp.karnataka.gov.in through link None 1727423979000 0 None None ELIGIBILITY Corrigendum/modifications/corrections, if any, will be published only in the website individual letters, information to bidders will not be sent by post, courier. All information will be on the web site. However in case of any clarification required you are directed to contact the under signed during office hours on all working days. None 1727423987000 0 None None ELIGIBILITY If any of the dates mentioned above is declared as holiday, the next working day will hold good without any change in the timings indicated. None 1727423994000 0 None None ELIGIBILITY Further details of work can be obtained in the office of the undersigned all working days None 1727424000000 0 None None ELIGIBILITY Tenderer can inspect site before quoting rates. Quoted rates are inclusive statutory deduction as per Government order. None 1727424006000 0 None None ELIGIBILITY Any over writing of civil engineering words and measurements should be clarified the considered department ( No claims should be considered). None 1727424012000 0 None None ELIGIBILITY Work Completion/Execution Period : 03 Months None 1727424022000 0 None None ELIGIBILITY Contractor should upload PWD Valid Registration copy None 1727424062000 0 None None ELIGIBILITY Similar wok done 50% OHT & 25% SC ST attached separate sheet should not be less than Rs. 6.34 lks. None 1727424069000 0 None None ELIGIBILITY Within 20 days of receipt of the Letter of Acceptance, the successful Tenderer shall deliver to the Employer a Security deposit(FDR) for an amount equivalent to 5% of the Contract price. None 1727424085000 0 None None ELIGIBILITY Work done certificate should be issued by competent authority not below the rank of Executive Engineer. None 1727424092000 0 None None ELIGIBILITY The tender of any tenderer who does not accept the conditions contained in the tender document is liable to be rejected. Conditional tenders will not be accepted. None 1727424099000 0 None None ELIGIBILITY The cost of tender form fee shall not be refundable. The tenderer shall bear all costs associated with the preparation and submission of his tender, and the employer will in no case be responsible and liable for those costs. No interest will be paid by the Government on the Earnest money deposit. None
preQualCriterionList	None
technicalCriterionList	None
tenderCriterionDocumentList	documentName optional documentTypeText Annual Turnover certificate CA with UDIN No. & Profit and loss statements & Income Tax returns True Technical Bid 50percent Similar work done BUILDING ,CC DRAIN, ROAD WORK attached separate sheet should not be less than Rs.6.34 lks. True Technical Bid PAN & GST Certificate True Technical Bid PWD Valid Registration Certificate True Technical Bid Line of credit amount that is not less than Rupees- lakhs, Conditional LOC not considered True Technical Bid Postal Address with contact number True Technical Bid
tenderWorkLocationList
tenderAddress	None
tenderRecallDTO	None