| 4099945 | 159723 | None | code01 | Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work. In all kinds of soils Depth upto 1.5 m including cost of labour, tools and other apurtenances required to complete the work. | Cum | 254.1 | 254.1 | 2.16 | False | None | None | False | None | False | 548.856 | 0 |
| 4099946 | 159723 | None | code02 | Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates | Cum | 6288.45 | 6288.45 | 0.14 | False | None | None | False | None | False | 880.383 | 0 |
| 4099947 | 159723 | None | code03 | Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:5:10 Using 40 mm nominal size graded crushed coarse aggregates | Cum | 7129.46 | 7129.46 | 0.65 | False | None | None | False | None | False | 4634.149 | 0 |
| 4099948 | 159723 | None | code04 | Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. Sqm0 Design Mix Using 20 mm nominal size graded crushed coarse aggregates | Cum | 11065.25 | 11065.25 | 0.13 | False | None | None | False | None | False | 1438.4825 | 0 |
| 4099949 | 159723 | None | code05 | Demolishing brick work manually/ by mechanical means including stack- ing of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge. | Cum | 510.92 | 510.92 | 1.28 | False | None | None | False | None | False | 653.9776 | 0 |
| 4099950 | 159723 | None | code06 | Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. | Cum | 8447.14 | 8447.14 | 23.79 | False | None | None | False | None | False | 200957.4606 | 0 |
| 4099951 | 159723 | None | code07 | Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in foundations and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. | Sqm | 1034.56 | 1034.56 | 34.7 | False | None | None | False | None | False | 35899.232 | 0 |
| 4099952 | 159723 | None | code08 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. Sqm0 Design Mix Using 20 mm nominal size graded crushed coarse aggregates | Cum | 11900.85 | 11900.85 | 2.28 | False | None | None | False | None | False | 27133.938 | 0 |
| 4099953 | 159723 | None | code09 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. Sqm0 Design Mix Using 20 mm nominal size graded crushed coarse aggregates | Cum | 10094.18 | 10094.18 | 0.14 | False | None | None | False | None | False | 1413.1852 | 0 |
| 4099954 | 159723 | None | code10 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. Sqm0 Design Mix Using 20 mm nominal size graded crushed coarse aggregates | Cum | 11204.7 | 11204.7 | 16.9 | False | None | None | False | None | False | 189359.43 | 0 |
| 4099955 | 159723 | None | code11 | Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Buildings | Tonne | 94824.42 | 94824.42 | 1.54 | False | None | None | False | None | False | 146029.6068 | 0 |
| 4099956 | 159723 | None | code12 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding | Kg | 178.08 | 178.08 | 1166.14 | False | None | None | False | None | False | 207666.2112 | 0 |
| 4099957 | 159723 | None | code13 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in- Charge. | Sqm | 4746.68 | 4746.68 | 7.92 | False | None | None | False | None | False | 37593.7056 | 0 |
| 4099958 | 159723 | None | code14 | Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 330.72 | 330.72 | 88.94 | False | None | None | False | None | False | 29414.2368 | 0 |
| 4099959 | 159723 | None | code15 | Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 295.74 | 295.74 | 95.47 | False | None | None | False | None | False | 28234.2978 | 0 |
| 4099960 | 159723 | None | code16 | Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 295.74 | 295.74 | 194.53 | False | None | None | False | None | False | 57530.3022 | 0 |
| 4099961 | 159723 | None | code17 | Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ Sqm including grouting the joints with white cement and matching pigments etc., complete. | Sqm | 1146.92 | 1146.92 | 45.2 | False | None | None | False | None | False | 51840.784 | 0 |
| 4099962 | 159723 | None | code18 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thick- ness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ Sqm including pointing the joints with white cement and matching pigments etc., complete. | Sqm | 942.34 | 942.34 | 57.45 | False | None | None | False | None | False | 54137.433 | 0 |
| 4099963 | 159723 | None | code19 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. | Sqm | 106.0 | 106.0 | 184.41 | False | None | None | False | None | False | 19547.46 | 0 |
| 4099964 | 159723 | None | code20 | Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 134.62 | 134.62 | 378.95 | False | None | None | False | None | False | 51014.249 | 0 |
| 4099965 | 159723 | None | code21 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 121.9 | 121.9 | 63.45 | False | None | None | False | None | False | 7734.555 | 0 |
| 4099966 | 159723 | None | code22 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. | Kg | 598.9 | 598.9 | 116.1 | False | None | None | False | None | False | 69532.29 | 0 |
| 4099967 | 159723 | None | code23 | Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished seamless type tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. | Kg | 155.82 | 155.82 | 205.88 | False | None | None | False | None | False | 32080.2216 | 0 |
| 4099968 | 159723 | None | code24 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 g/Sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 m or as desired by Engineer- in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | Sqm | 598.9 | 598.9 | 27.23 | False | None | None | False | None | False | 16308.047 | 0 |
| 4099969 | 159723 | None | code26 | Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary 19/20 mm dia 2 mm thick | m | 69.0 | 69.0 | 50.0 | False | None | None | False | None | False | 3450.0 | 0 |
| 4099970 | 159723 | None | code27 | Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary 25 mm dia 2 mm thick | m | 81.0 | 81.0 | 30.0 | False | None | None | False | None | False | 2430.0 | 0 |
| 4099971 | 159723 | None | code28 | Supplying and fixing sheet Metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc. 75 x 75 x 65 mm | Each | 106.0 | 106.0 | 2.0 | False | None | None | False | None | False | 212.0 | 0 |
| 4099972 | 159723 | None | code29 | Supplying and fixing sheet Metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc. 100 x 75 x 65 mm | Each | 118.0 | 118.0 | 2.0 | False | None | None | False | None | False | 236.0 | 0 |
| 4099973 | 159723 | None | code30 | Supplying and fixing PVC/metal conduit Deep junction box 19/20 mm deep Junction box | Each | 49.0 | 49.0 | 8.0 | False | None | None | False | None | False | 392.0 | 0 |
| 4099974 | 159723 | None | code31 | Supplying and fixing PVC/metal conduit Deep junction box 25 mm deep Junction box | Each | 56.0 | 56.0 | 16.0 | False | None | None | False | None | False | 896.0 | 0 |
| 4099975 | 159723 | None | code32 | Supplying And Fixing Metal Fan Box with Round Hook. | No | 160.0 | 160.0 | 4.0 | False | None | None | False | None | False | 640.0 | 0 |
| 4099976 | 159723 | None | code33 | Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Short point upto 3Mtr from tapping point to out let via switch box | Point | 285.0 | 285.0 | 14.0 | False | None | None | False | None | False | 3990.0 | 0 |
| 4099977 | 159723 | None | code34 | Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Medium point above 3Mtr upto 6Mtr from tapping point to out let via switch box | Point | 394.0 | 394.0 | 2.0 | False | None | None | False | None | False | 788.0 | 0 |
| 4099978 | 159723 | None | code35 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:2010 1.5 sqmm | m | 26.0 | 26.0 | 100.0 | False | None | None | False | None | False | 2600.0 | 0 |
| 4099979 | 159723 | None | code36 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:2010 2.5 sqmm | m | 42.0 | 42.0 | 30.0 | False | None | None | False | None | False | 1260.0 | 0 |
| 4099980 | 159723 | None | code37 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.3 Module | Each | 161.0 | 161.0 | 2.0 | False | None | None | False | None | False | 322.0 | 0 |
| 4099981 | 159723 | None | code38 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 8 Module | Each | 284.0 | 284.0 | 2.0 | False | None | None | False | None | False | 568.0 | 0 |
| 4099982 | 159723 | None | code39 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A One Way Switch | Each | 102.0 | 102.0 | 16.0 | False | None | None | False | None | False | 1632.0 | 0 |
| 4099983 | 159723 | None | code40 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator Two Module | Each | 357.0 | 357.0 | 4.0 | False | None | None | False | None | False | 1428.0 | 0 |
| 4099984 | 159723 | None | code41 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 16A One Way Switch | Each | 180.0 | 180.0 | 4.0 | False | None | None | False | None | False | 720.0 | 0 |
| 4099985 | 159723 | None | code42 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16A Universal Socket | Each | 236.0 | 236.0 | 1.0 | False | None | None | False | None | False | 236.0 | 0 |
| 4099986 | 159723 | None | code43 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. TV/Telephone Socket | Each | 162.24 | 162.24 | 1.0 | False | None | None | False | None | False | 162.24 | 0 |
| 4099987 | 159723 | None | code44 | Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 6-32 A SP | Each | 739.0 | 739.0 | 1.0 | False | None | None | False | None | False | 739.0 | 0 |
| 4099988 | 159723 | None | code45 | Supplying and fixing regular MCB distribution boards on wall/wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS enclosure. II - Double Door 8 Way SP & N | Each | 1492.0 | 1492.0 | 1.0 | False | None | None | False | None | False | 1492.0 | 0 |
| 4099989 | 159723 | None | code46 | Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of percentage leakage current, programmable delay/auto/ manual reset facility suitable to mount on DIN rail/ flush mounting on panel board. | Each | 9255.0 | 9255.0 | 1.0 | False | None | None | False | None | False | 9255.0 | 0 |
| 4099990 | 159723 | None | code47 | Earthing: Supplying and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit. The pits should be filled up with equal proportion of salt and charcoal 150mm around the pipe to complete depth. The connection from the pipe to the conduits etc. is to established through GI wire of sizes as per clause 7.3.3 of IS 732 using 12mm bolts, nuts, washers and check nuts, the pipe shall have 16 through holes of 12mm dia. | Each | 3510.0 | 3510.0 | 1.0 | False | None | None | False | None | False | 3510.0 | 0 |
| 4099991 | 159723 | None | code48 | Providing and filling sand inexcavatedtrench to cover already laid UG cable to a depth of 150mm all round the cable. | Mtr | 100.0 | 100.0 | 1.0 | False | None | None | False | None | False | 100.0 | 0 |
| 4099992 | 159723 | None | code49 | Supplying and fixing of class A (medium duty) GI pipe of wall thickness not less 14 than 3.25mm on pole/wall/drain crossing with necessary clamping arrangements for UG cable of 1.1 KV. | Mtr | 335.0 | 335.0 | 1.0 | False | None | None | False | None | False | 335.0 | 0 |
| 4099993 | 159723 | None | code50 | Supplying and fixing L.T. cast Iron pot heads suitable for 1.1 KV class UG cable 15 filled with necessary bitumen/insulating compound complete with terminals, clamps, bolts, nuts and washers etc. | Each | 350.0 | 350.0 | 1.0 | False | None | None | False | None | False | 350.0 | 0 |
| 4099994 | 159723 | None | code51 | Supplying and running GI/Copper conductor for grounding and (along with other 16 wires in conduit system of wiring) using necessary suitable size clamps, nails, guttas/spacers etc. | Mtr | 19.0 | 19.0 | 1.0 | False | None | None | False | None | False | 19.0 | 0 |
| 4099995 | 159723 | None | code52 | Chemical Earthing for grounding, conduits, IC cutouts and other equipments on the meter board by using copper bounded/SS rod with earth enhancing backfill compound which is non corresive, thermally conductive, potentional to permissible limits, superior fault conduction capacity, non toxic, weather resistance and capabile of achieving OHMIC value ohm. Using 6ft copper bonded rod with backfill compound. | Mtr | 5538.0 | 5538.0 | 1.0 | False | None | None | False | None | False | 5538.0 | 0 |
| 4099996 | 159723 | None | code53 | Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball bearing system 48" Sweep (1200 mm) Regular model | Each | 2984.0 | 2984.0 | 4.0 | False | None | None | False | None | False | 11936.0 | 0 |
| 4099997 | 159723 | None | code54 | Supplying of feet -PVC Batten with integrated LED tube W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI lessthan 80. Power Input: 220-240V@ 50/60Hz & Power factor lessthan 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. LED light fitting 1 x 4' - 20/22 W | Each | 690.0 | 690.0 | 5.0 | False | None | None | False | None | False | 3450.0 | 0 |
| 4099998 | 159723 | None | code55 | Supplying of .....feet -PVC Batten with integrated LED tube W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI lessthan 80. Power Input: 220-240V@ 50/60Hz & Power factor lessthan 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. LED light fitting 1 x 4' - 36/40 W | Each | 1269.0 | 1269.0 | 5.0 | False | None | None | False | None | False | 6345.0 | 0 |
| 4099999 | 159723 | None | code56 | Supplying & Fixing of 70-150 W lamp holder 2 Pin | No | 63.0 | 63.0 | 5.0 | False | None | None | False | None | False | 315.0 | 0 |
| 4100000 | 159723 | None | code57 | Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, required Nos of round blocks and clamps. On wall/ ceiling / Rafter / Girders | Each | 490.0 | 490.0 | 10.0 | False | None | None | False | None | False | 4900.0 | 0 |
| 4100001 | 159723 | None | code58 | Fixing a ceiling /wall mounting fan of all capacities and all types, with necessary clamps and 'S' hook made out of 15mm dia MS rod, with 5 A. ceiling rose of approved quality with necessary length of 23/0.0076 inch PVC insulated twin twisted wire of approved quality, mounted on a suitable size wooden board and wired. | Each | 171.0 | 171.0 | 4.0 | False | None | None | False | None | False | 684.0 | 0 |
| 4100002 | 159723 | None | code59 | Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, required Nos of round blocks and clamps. On wall/ ceiling / Rafter / Girders | Each | 450.0 | 450.0 | 10.0 | False | None | None | False | None | False | 4500.0 | 0 |